+ All Categories
Home > Documents > Logo Placements 2502 T-Shirt

Logo Placements 2502 T-Shirt

Date post: 27-Jan-2022
Category:
Upload: others
View: 4 times
Download: 0 times
Share this document with a friend
1
Placements 1 and 3 Middle of logo Size X(cm) XS 20 S 21 M 22 L-XL 23 2XL-3XL 24 Logo Placements www.hultaforsgroup.com 2502 T-Shirt Recommended logo placements Heat seal 1 Left breast 2 Left sleeve, bottom of logo 1 cm above seam 3 Right breast 4 Right sleeve, bottom of logo 1 cm above seam 6 Back, top of logo 12 cm below neck seam 7 Center of breast, top of logo 1 cm below neck seam. 50 Center of breast, in same hight as placements 1 and 3 63 Back, bottom of logo 2 cm above bottom seam Add B after the placement and it will be below the (1B) Y and it will be turned from bottom to top Z after the placement and it will be turned from top to bottom 1 1B 1Y 1Z 6 63 1 3 2 4 50 7
Transcript
Page 1: Logo Placements 2502 T-Shirt

Placements 1 and 3Middle of logoSize X(cm)XS 20S 21M 22L-XL 232XL-3XL 24

Logo Placements

www.hultaforsgroup.com

2502 T-ShirtRecommended logo placementsHeat seal 1 Left breast 2 Left sleeve, bottom of logo 1 cm above seam 3 Right breast 4 Right sleeve, bottom of logo 1 cm above seam 6 Back, top of logo 12 cm below neck seam 7 Center of breast, top of logo 1 cm below neck seam. 50 Center of breast, in same hight as placements 1 and 3 63 Back, bottom of logo 2 cm above bottom seam

Add B after the placement and it will be below the (1B)Y and it will be turned from bottom to topZ after the placement and it will be turned from top to bottom

1

1B1Y

1Z

6

63

1324

50

7

Labels, badges, retro-reflec-tive materials, transfers, etc., which are applied to the outermost surface of the garment, with an area > 10 cm2 shall be tested in ISO 15025, Procedure A.

How to keep classification ISO EN 11612

Recommended