+ All Categories
Home > Education > London eye by rizwan ahmad

London eye by rizwan ahmad

Date post: 22-Jan-2018
Category:
Upload: junaid-bashir
View: 790 times
Download: 0 times
Share this document with a friend
17
LONDON EYE Submitted by: Rizwan Ahmad 03-CE-2012
Transcript
Page 1: London eye by rizwan ahmad

LONDON

EYE

Submitted by:

Rizwan Ahmad

03-CE-2012

Page 2: London eye by rizwan ahmad

INTRODUCTION

Page 3: London eye by rizwan ahmad

HISTORY

1. It was built to celebrate millennium inaugurated

by prime minister of united kingdom, Tony Blair.

2. Architects thought rotating wheel will allow the

people to have the view of whole city.

Page 4: London eye by rizwan ahmad

PEOPLE BEHIND THE PROJECT

1. Designed by David marks and Julia Barfield.

2. Funding for this project was done by British

Airways.

3. London eye is operated and managed by

Europe’s leading operators of visitors

Attractions, the Tassauds group.

4. Hollandia the steel work engineers.

5. POMA the capsule constructors.

Page 5: London eye by rizwan ahmad

PASSENGER CAPSULES

1. 32 sealed and air conditioned passenger capsules which can accommodate 25 passengers each

2. Wheel rotates with a speed 26 cm per second so that one revolution takes 30 minutes

3. Each capsule is in touch with the ground with the help of camera and radio links

Page 6: London eye by rizwan ahmad

THE HUB AND SPINDLE

1. The spindle at the centre of wheel structure and the hub, which rotates around the wheel are specially designed

2. Spindle is 23 m high

3. Combined weight of hub and spindle is 330 tonnes

4. The hub and the spindle are supported by two 60 m high tapered column’s called as A frames

Page 7: London eye by rizwan ahmad

THE RIM

1. 64 cables run from hub which rotates

around the spindle to the inner chord

2. They keep the rim at constant distance

from hub

3. 16 cables then join the outer chord to

the hub which keeps the wheel stiff as

it rotates

Page 8: London eye by rizwan ahmad

CONSTRUCTION AND

REALISATION OF SYSTEM

1. Main components built off site

2. Workers assembled the wheel

horizontally on the temporary

support

Page 9: London eye by rizwan ahmad

INSTALLATION OF SYSTEM

1. Once assembled 1300 ton structure

was slowly raised by hydraulic lifts and

cables

2. 32 capsules were attached to rim

Page 10: London eye by rizwan ahmad

THE CONTROL OF WIND

1. The structure has been designed to be

safe in all wind conditions.

2. capsules are aerodynamically shaped.

3. Mass dumpers are fixed to outer rim.

Page 11: London eye by rizwan ahmad

BOARDING AND

DISEMBARKATION

1. It does not usually stop to take

passengers on and off the moving

capsules

Page 12: London eye by rizwan ahmad

OPENING

1. Opened by prime minister tony Blair on

31 Dec 1999

2. Opened to public on 9 march 2000

3. On June 2008 30 million people had

ridden the London eye since it was

opened

Page 13: London eye by rizwan ahmad

FACTS AND FIGURES

1. It took seven years and skills of hundrend’s

of people to make the dream project

2. The spindle which holds the wheel structure

is 23m long

3. 1700 tonnes of steel were used

4. It took a week to lift it in vertical position

Page 14: London eye by rizwan ahmad

FACTS AND FIGURES

1. Total weight is 2100 tonnes

2. It will turn continuously an average of

8000 revolutions per year

3. Can carry 15000 visitors

Page 15: London eye by rizwan ahmad

FACTS AND FIGURES

1. Passengers can see in each direction

2. 3.5 million people in its first year of

operation

3. Tickets start at 8 USD for adults

Page 16: London eye by rizwan ahmad

AT PRESENT

1. Nowadays, the wheel is one

of the popular known

landmarks in London and it

is famous in the world

2. Now about 10000 people

visit it every day

Page 17: London eye by rizwan ahmad

THANK YOU


Recommended