Los Angeles Trade Technical College Student...

Los Angeles Trade Technical College

Student Employment Center

ST 415

Machine Shop-CNC

Part Time

Job Title: Mechanic Industrial Job Number: 567

Hours/Days: 1st or 2

nd shift Salary: $14.00- 20/hrs

Or DOE

Approximate Location: Vernon, CA

Requirements: Performing routine maintenance on equipment; repairing

machines or systems; critical thinking; troubleshooting;

installation and communication skills. Perform work to keep

machines, mechanical equipment, or the structure of the

establishment in repair. Duties may involve cleaning, lubricating,

pipe fitting, boiler making, insulating, welding, machining,

carpentry, repairing electrical or mechanical equipment,

installing, aligning, and balancing new equipment, and repairing

or repainting buildings, floors, or stairs.

Job Title: Operate/Program CNC Routers Job Number: 785

Hours/Days: Mon-Fri Salary: DOE

Approximate Location: Van Nuys, CA

Requirements: Skills Requirement: Recent graduate

Job Description: Operate and program CNC routers for

manufacturing wood furniture’s and components.



ST 415

Machine Shop-CNC

Part Time

Job Title: CNC Programmer Consultant Job Number:1189

Hours/Days: TBD Salary: DOE

Approximate Location: Vernon, CA

Requirements: Minimum 5 years experience programming machinery and

drafting. CNC Programming Alphacam, Solidworks. 3D drawings

and prior experience with 5 axis machinery required. Knowledge

of wood types, tools, saws and other WS machinery a plus.

Starting a new catalog of programs for a brand new 5-axis CNC

router; Create and/or modify existing programs for 3-axis CNC

routers; Verifies settings by measuring positions, first-run part,

and sample work pieces, adhering to company standards;

Produces new and modifies existing 3-D shop drawings with

Solidworks and/or Alphacam; Ability to provide time estimates

for assignments; and works closely with CNC Operators and

management communicating actions, irregularities, and

continuing needs.

Job Title: CNC Programmer Job Number:1356

Hours/Days: Open Salary: $15-20/hr

Approximate Location: Glendale, CA

Requirements: Skills Requirement: Proof of courses completed or references

needed.

Job Description: We need an individual to program our Jr CNC

plus to complete our 80% lower to 100%. This is a

project/contract base opportunity.



ST 415

Machine Shop-CNC

Part Time

Job Title: CNC Machinist Job Number:1376

Hours/Days: Weekdays Salary: EOE

Approximate Location: Santa Ana, CA

Requirements: Skills Requirement: Several years experience in a CNC machine

shop, technical knowledge of machines and machining practices

of castings; Experience in CNC programming of 4th axis milling

of castings; technical knowledge of machines and machining;

Knowledge of GD & T, drawings, based on ANSI 14.5 or Mil

STD.

Job Description: Candidate will be responsible for

manufacturing complex cast components, casting tooling and

molds utilizing multiple manufacturing methods including rapid

prototyping techniques. This job requires extensive use of 3D

CAD/CAM software and computerized inspection. Training

specific to casting and casting application will be provided.

Manage setup of CNC machines; communicate with inspection to

assist in first article/prototype inspection, tooling offset and

fixturing verification; supervise machinist; initiate purchase

requests for material and cutting tools; fluent in G-Code and CNC

Programming of 4 Axis Milling; Create CNC programs and

produce fixtures based on engineering specs.



ST 415

Machine Shop-CNC

Full Time

Job Title: Cylindrical Grinder/ Machine

Operator

Job Number:712

Hours/Days: M-F(8am- 4:30pm) Salary: Negotiable

Approximate Location: Los Angeles, CA

Requirements: Basic knowledge on how to operate a cylindrical grinding

machine. Able to take precise measurements with micrometers

and other calibrating tools. Operate a grinding machine, Specs

given per job.

Job Title: Maintenance Mechanic Job Number:563

Hours/Days: 1st, 2

nd 3

rd shift Salary:

Approximate Location: La Habra, CA

Requirements: Strong knowledge of electrical safe work practices; AC and DC

Electrical theory; Reading/creating electrical prints and control

schematics; motor control; mechanical systems; production

process; HMI screens; pneumatic and hydraulic valves; phot eyes;

proximity sensors; limit switches; breakers and fuses. Ability to

troubleshoot control panels using relay logic; cam driven switch

boxes; heat and humidity control systems; process control valves;

pneumatic control systems; hydraulic control systems; metal

detection systems; ink jet coding systems; mixers; ovens;

proofers; coolers; slicers and baggers. Responsibilities include

reducing the downtime on operating lines by performing

preventative maintenance duties and providing corrective

technical support for equipment and facilities.

Job Title: CNC Operator II Job Number:1052

Hours/Days: Varies Salary:$15.00-$17.00

Approximate Location: Torrance, CA

Requirements: Must have CNC Milling machine experience, is familiar with

FUNUC controls. Knowledge of NL Lathe is preferred. High

School diploma or equivalent, some college and 10 year

background check and drug test required. Set-up and operate

Horizontal Mori Seiki Mill Machines; change tools, and pre-set

milling cutters, drills, reamers, face mills; make edits to program

for off sets; capable of working to close tolerances; can read blue

prints and use various measuring tools; must be able to run more

than one machine at a time.



ST 415

Machine Shop-CNC

Full Time

Job Title: CNC Machinist Job Number:1053

Hours/Days: Varies Salary:$10.00


Requirements: +years experience and must have basic mechanical skill. High

school diploma or equivalent, some college.

Job Title: Sheet Metal Fabrication

Programmer

Job Number:1065

Hours/Days: M-T 8am-7:30pm

Friday 6am- 2:30pm Salary: Open

Approximate Location: Gardena, CA

Requirements: Analyze part drawings, specifications, and design data. Works

from written specifications, blueprints, models, samples, and/or

shop drawings to write CNC programs of machine instruments

through the use of a computer. Will use Solid works, MetaCAM

AP 100, Metal soft, and Machine Talk. Will create, maintain, and

troubleshoot programs for turret/punch press and laser cutting

machines. Will setup and operate machines when not

programming. Will field operator comments, questions, and

suggestions. Will initiate tooling and planning change request.

Must be able to work with a sense of urgency in order to meet

deadlines and expedite work.

Job Title: Machinist Job Number:1073

Hours/Days: M-F Salary:$12.00

commensurate w/

experience

Approximate Location: Orange, LA Counties

Requirements: Mater machining, knowledge with measuring instruments

Operating mill machine, lathe, and drill press.



ST 415

Machine Shop-CNC

Full time

Job Title: CNC Programmer Job Number: 1155

Hours/Days: 7am- 3:30 pm Salary:$20/hrs

Approximate Location: Santa Fe Spring , CA

Requirements: Mastercam Programming in 3- and 5- axis, Experience with Catia

CAD / CAM software, understanding of machine tools and shop

safety . Looking for a 3- and 5- axis programmer to create and

modify routing programs for existing and future manufacturing

jobs. Mold making and tool design a major plus.

Job Title: Bakery Equipment Repair

Technician

Job Number: 1168

Hours/Days: All Salary:$15-$18/hrs


Requirements: Mechanical/Electrical skills are a must, troubleshoot and diagnose

electrical problems. Troubleshoot and diagnose mechanical

problems. Lift 50-100 lbs. Servicing bakery equipment including

preventative maintenance, troubleshooting and repairing

commercial bakery equipment such as mixers, sheeters, ovens,

proofers, etc.

Job Title: Mechanic Technician Job Number: 1178

Hours/Days: 8:00am- 5:00 pm Salary:TBD


Requirements: Should have a basic grasp of mechanical and electrical diagrams

and engineering students from both fields are strongly encouraged

to apply for the position. We build machines that are designed to

heat and seal various materials across a wide variety of industries

such as medical devices, industrial products and pharmaceutical

applications.



ST 415

Machine Shop-CNC

Full Time

Job Title: Maintenance Mechanic B 3rd Job Number: 1196

Hours/Days: 10:00pm to 6:00am Salary: TBD


Requirements: High School diploma with a certification at a trade or technical

school preferred; Basic knowledge of plant and machine safety;

Basic knowledge in at least 3 of the following areas: carpentry,

plumbing, painting, or hydraulic, pneumatic, mechanical or

electrical systems; Ability to read and interpret blueprints and

specs; Ability to drive forklifts and possess necessary

certification; Ability to diagnose equipment maintenance and

repair needs and apply troubleshooting procedures; Ability to set-

up, plans, and operates machine tools; and must be flexible with

work schedules. Repairs on molding equipment, auxiliary

machinery, appliances, chiller units, thermolators, dryers and

compressors; Performs preventative maintenance functions;

Fabricates jigs and fixtures; Disassembles, cleans and replaces

damaged or work parts; Assist lead with maintaining inventory;

and Remains on 24-hour call and works extended schedules.

Job Title: Mold Injection Mechanic 3rd

Shift Job Number: 1197

Hours/Days: 10:00am- 6:00 pm Salary: TBD


Requirements: High School diploma or certification at a trade or technical school

preferred; Must have 2 or more years general shop knowledge;

Ability to read and interpret blueprints and specs; Must have

ability to safely use hand tools and operate equipment; Ability to

perform basic measurements using micrometer and calipers; Must

have general knowledge of hydraulic, pneumatic, electrical and

mechanical operations; Must be able to drive forklifts and cranes

or pass certification exam during initial probationary period.

Repairs a wide variety of injection molds, dies, tools, jigs, fixtures

and other equipment; Assists with diagnosing and correcting

problems; Assists with making tool tryouts; Operates equipment;

Tracks Engineering Change Orders and Corrective Action

Reports; May assist Mold Maintainers with preventative

maintenance functions; Maintain and document work; and follow

written department's standard.



ST 415

Machine Shop-CNC

Full Time

Job Title: Space Simulation Technician Sr Job Number: 1199

Hours/Days: Days 1st 3Months then 2

nd Shift Salary: BOE

Approximate Location: El Segundo, CA

Requirements: Have at least one year of mechanical assembly experience, willing

to work 12 hour shifts during surge test periods, willing to work

any shit and overtime, and previous experience using Microsoft

Office applications. Determines test methods; selects equipment;

develops sequence of operations; fabricates, sets up,

troubleshoots, and performs environmental testing on flight

spacecraft systems. Utilizes knowledge of testing methods

including, cryogenics, vacuum technology, fluid mechanics,

vibration control systems, pyroshock/shock, acoustics, closed

loop heater control, data acquisition, instrumentation, satellite

spin systems, spacecraft fixture assembly, precision fabrication

and assembly. Evaluates test data to make real time test decisions

in order to avoid spacecraft/systems/component damage and

minimize test delays

Job Title: Machinist Job Number: 1203

Hours/Days: 7am-4:30pm Tues-Fri Salary: $9.00/hr

Approximate Location: West Los Angeles, CA

Requirements: General machinist. Manual mill/lathe, blue print reading, set-up

and basic CNC programming skills. Shop environment. Will set

up and run mills/lathes on steel, aluminum and plastic parts.

Job Title: Extruder Operator Job Number: 1205

Hours/Days: M-F 5am- 1:30pm or 1:30pm -

10pm Salary: $9.00/hr

Approximate Location: Santa Fe Spring, CA

Requirements: Good hand-eye coordination, manual dexterity, physical stamina,

and the performance of repetitive task for long periods. Able to

perform basic math problems, add, subtract and use measurement

tools. Set up and operate extruder machines for making and

insulating wires and extruding jacket on cables.



ST 415

Machine Shop-CNC

Full Time


Hours/Days: 8am-4:30pm Salary: $12.00/hr


Requirements: Will be trained to repair commercial coin operated washers and

dryers.

Job Title: Function Test Technician Job Number: 1231

Hours/Days: Monday- Friday 7am-5pm Salary: $12.00/hr

Approximate Location: Palmdale, CA

Requirements: Previous work experience in the electrical or mechanical testing

field; High School diploma or equivalent, technical school or

associates in the engineering field preferred; Must be able to read,

write and speak English; Ability to read and understand electrical

schematics; Ability to read and understand blueprints and

mechanical drawings; Proficiency with all basic hand tools;

Ability to use multi-meter; Proficient with the English

measurement system and be able to learn the Metric measurement

system; Able to work flexible hours; Willing to travel; and

familiar with MS Office applications. Performs all aspects of

work on rail cars being processed through Facility and

Commissioning Sites. This includes all electrical and mechanical

trouble-shooting, repairs, modifications and any other duties

requested. The technician will perform test procedures on some

the following systems: HVAC, brakes, propulsion,

communications systems, toilet systems, train line systems, sign

systems, automatic train control systems, general functional tests,

hipotential test, wining continuity tests, pneumatic leakage tests,

dynamic tests, and burn-in tests.



ST 415

Machine Shop-CNC

Full Time

Job Title: General Floor man Job Number: 1256

Hours/Days: Mon-Fri, Select Saturday, 3shifts Salary: $13.66- $15.00


Requirements: Be able to lift and carry at least 50lbs of material; ability to

communicate effectively; basic agility to work in industrial

setting; understanding of people & the common sense. Learn the

basic grinding principles and terminology; learn safe operation of

all grinding equipment in the department; grind forgings as

instructed to remove indications and flash; Learn basic blue print

reading; and assist in the forging set-up & production, tear down

job after it has run in the machine.


Hours/Days: Mon-Fri, 6am- 2:30pm Salary: Varies

Approximate Location: Duarte, CA

Requirements: Ability to use hand and power tools; mechanically inclined;

ability to interpret mechanical and assembly drawings; ability to

use basic quality control tools (calibers, micrometers, gages, etc);

basic and written communication skills; basic machine operating

experience (manual lathe and mill).

Job Description: Mechanical assembly of cutting, grinding, and

polishing machines; touch up of existing CNC machined parts on

manual mill or lathe (when needed) to make sure they fit together;

work in machine shop in procuring parts to be machined for our

equipment assemblies and make sure all parts received are within

our specifications. Training will be provided.



ST 415

Machine Shop-CNC

Full Time

Job Title: Machine Tool Technician Job Number: 1292

Hours/Days: Mon-Fri, 8am- 5pm Salary: TBD


Requirements: Skills Requirement: Basic understanding of electrical circuitry

related to industrial machinery; recognize typical machine

components by name such as gears, bearings, electrical

components, etc; technical support trouble shooting mechanical

and electrical issues with industrial machines; repairing and/or

servicing industrial machines.

Job Description: We are currently seeking a Machine Tool

Technician (manual and CNC) to support our end users,

distributors, as well as our parts and sales departments.

Job Title: Maintenance Technician Job Number: 1303

Hours/Days: Full Time /2nd

shift Salary: BOQ

Approximate Location: Monrovia, CA

Requirements: Skills Requirement: Possess a High School Diploma or GED and

three years of maintenance experience. Preferred qualifications:

five years of maintenance experience; experience in a

manufacturing environment; possess an Associate's or Technical

degree or higher; one year of combined experience with

electromechanically troubleshooting and/or repair.

Job Description: Installing, maintaining, repairing, modifying,

fabricating, calibrating, programming and adjusting of

mechanical, electrical, electronic, CNC and microprocessor based

systems in a manufacturing environment.



ST 415

Machine Shop-CNC

Full Time

Job Title: CNC Machinist Job Number: 1316

Hours/Days: 7:30am-4:30pm/12:30pm-9:00pm/

plus over time Salary: $11.00 BOE

Approximate Location: City of Commerce, CA

Requirements: Must have HAAS experience; minimum 2+ years experience in

CNC set-up and machining in a machine shop or manufacturing

company; experience with complex and close tolerance parts is a

plus; must be able to operate assigned machines and equipment

and complete machining operations from work orders, drawings,

planning documents or verbal instructions; must be able to use

machinist tools, inspection tools and follow company quality and

work order for instructions; must be detail oriented and possess a

strong drive for exceptional work; must have the ability to work

under minimal supervision with a high degree of skill and

accuracy.

Job Description: Study blueprints, sketches, drawings, manuals,

specifications or sample parts to determine dimensions and

tolerances of finished work piece, sequence of operations and set-

up requirements; maintain, calibrate, set-up and operate

conventional machine shop equipment; set-up, program and

operate CNC equipment to fabricate/machine parts; use one or

more CNC control functions to control part size and machine

functions as required; ability to perform all within tight

tolerances.



ST 415

Machine Shop-CNC

Full Time

Job Title: Mechanic B( Electrician) Job Number: 1319

Hours/Days: Mon-Fri, 6am- 2:30pm Salary: DOE

Approximate Location: Garden Grove, CA

Requirements: Skills Requirement: Certification as a licensed Electrician;

demonstrated knowledge of pharmaceutical/food

processing/chemical processing operations including packaging

equipment, manufacturing equipment, PLC's, electrical/electronic

preferred; Excellent troubleshooting skills are required; ability to

carry out tasks with minimal guidance, direction and assistance;

strong interpersonal and oral. Written communication skills;

ability to multi-task and work well under pressure in a fast paced

environment; ability to safely and efficiently use hand and

electrical tools.

Job Description: Responsible for repairing complex breakdowns,

overhauling equipment, rebuilding equipment, installing

equipment to a high level of standard and with minimal

guidance/direction/assistance; troubleshoots and repairs safely,

quickly and effectively, identifying and selecting parts as

required, overseeing contractors as required; develops and

facilitates trade related training programs for mechanics;

provides technical guidance to mechanics; contacts equipment

manufactures; assists in developing PM task lists, spare parts lists,

prepares work orders and deficiency lists for equipment and

facility; maintains a safe and debris-free work environment and

follow company safety rules, SOP's and GMP's

Job Title: Machinist, Mechanic helper Job Number: 1320

Hours/Days: Mon-Fri, 6am- 2:30pm Salary: $11.00 BOE


Requirements: Skills Requirement: Tig welding, machinist skill in Mill or lathe

conventional. Good with hand tools and power tools. Must have

own hand tools. Clean driving record. Available to work overtime

and different schedules. Able to lift 50 pounds.

Job Description: Machine fabrication, some welding, some

driving required. Work schedule might require to work long hours

sometimes and go out of town.



ST 415

Machine Shop-CNC

Full Time

Job Title: Maintenance Mechanic (Lead) Job Number: 1325

Hours/Days: Day and Night Shift/ Mon -Fri Salary: $11.00 BOE

Approximate Location: Garden Grove, CA

Requirements: Skills Requirement: Must have 5 or more years' experience

working in and around mechanical equipment, in a manufacturing

environment, preferably under cGMP regulations; High school

diploma or general education degree (GED) required; physical

ability to repetitively lift, stand, climb, bend, etc within a

manufacturing environment; must be able to work with known

allergens (eg. Milk, soy, fish oils and or other products derived

from fish); high level of organizational skills, good written and

oral communication skills; ability to work independently and

meet deadlines; must be able to multi-task and follow-up ; must

demonstrate effective leadership.

Job Description: Responsible for leading maintenance activities in

the plant and assisting the supervisor on a daily basis. They are

responsible for adhering to and assuring adherence of their team

to all Safety Policies, Standard Operating Procedures (SOPs) and

Good Manufacturing Practices (cGMPs) that are in effect assuring

personnel safety, and the quality and quantity of product

produced.

Job Title: Bindery Operator Job Number: 1333

Hours/Days: TBD Salary: Negotiable

Approximate Location: Burbank, CA

Requirements: Skills Requirement: Must have good communication skills,

understand the operation of the Bindery machine, must be able to

identify and correct any difficulties relating to the finishing of a

job. Minimum 5 years professional experience.

Job Description: To efficiently operate the Bindery equipment

while maintaining a high level of quality in the finished product.

Review schedule with finishing coordinator, ticket for bindery

instructions and perform additional duties as assigned.



ST 415

Machine Shop-CNC

Full Time

Job Title: Maintenance Technician Job Number: 1334

Hours/Days: TBD Salary: Negotiable

Approximate Location: Burbank, CA

Requirements: Skills Requirement: Mechanical skills a bonus, enthusiasm, hard

worker, must have experience as an electrician. Minimum 4 years

professional experience.

Job Description: Assist in servicing and maintaining facilities

equipment as follows: Air conditioners, exhausts & roof

maintenance; electrical (changing bulbs, ballasts, switches, plugs,

circuit breakers pull wire); plumbing (toilets, faucets, pipes new

lines); patch and paint walls interior and exterior; R O system

maintenance; output chemicals (replenish and replace); assist

other departments; assist at vendor installs.

Job Title: Deco Machine Operator Job Number: 1348

Hours/Days: 5 days Salary: Starting

$11.00/hr

Approximate Location: Carson, CA

Requirements: JOB DUTIES: Sets up the printing equipment to accommodate

for job orders and specs in the production run, Conducts ongoing

visual inspection of machine for leaks, loose belts, etc., according

to checklist, Troubleshoots lithograph and offset printing

equipment, Conducts adjustments as needed to meet customer’s

specifications, Continuously checks, on a random basis, for

compliance to customer specs and quality standards.

REQ SKILLS: English competent (speak, write and read).Basic

math operations, Good mechanical aptitude and skills, Knowledge

of industrial printing equipment, Knowledge of lithograph and

offset printing techniques, Able to detect equipment malfunctions

or misalignments, Ability to work in and promote team

environment, Ability to communicate effectively with peers and

supervisory personnel, Excellent color perception.



ST 415

Machine Shop-CNC

Full Time

Job Title: Sawblade Sharpener Job Number: 1362

Hours/Days: 7a-4p Mon-Fri Salary: 16.50/hr


Requirements: Skills Requirement: Limited computer use, machine operation

Job Description: Inspect and load sawblades into cnc

resharpening machines. Enter dimensions into computer.

Maintain machinery.

Job Title: CNC Machinist Job Number: 1395

Hours/Days: Mon-Fri 8a-5p Salary: DOE


Requirements: Skills Requirement: Looking for machinist capable of set-up and

operations of CNC Lathes and Mills, must be able to make

offsets, read blueprints and edit programs as necessary to

maintain blue print/work order tolerances. Must have minimum of

5 years experience; strong blueprint reading ability; strong

mechanical aptitude; ability to plan and program jobs a plus.

Job Description: Set-up and operations of CNC Lathes and Mills

must be able to make offsets, read blueprints and edit programs as

necessary to maintain blue print/work order.



ST 415

Machine Shop-CNC

Full Time

Job Title: 2

nd Shift Press Break Operator Job Number: 1411

Hours/Days: 2nd

Shift Mon-Fri Salary: $16/hr

Approximate Location: Fontana, CA

Requirements: Skills Requirement: A minimum of 2 years substantial

experience using a Press Brake; experience in a related field to the

Utility/Power industry is a plus; Experience in reading sheet metal

drawings; must possess basic math and reading skills; basic

understanding of sheet metal equipment and processes including

press break, welding, machining, etc.; Amada NC9 Ex 11

Controller (RG125) experience a plus; experience with Amada

machines a plus.

Job Description: Setting up and operating a Amada Press Brake

including tool changes and program loading; reading sheet metal

drawings; dimensionally checking first article parts; knowledge of

bend deductions.

Job Title: Optomechanical Development

Technician 1

Job Number: 1418

Hours/Days: Days Salary: Competitive

Approximate Location: Pasadena, CA

Requirements: Skills Requirement: Typically requires High School diploma

with a minimum of 3 years of general work experience; moderate

understanding of general job aspects and details in : mechanical

design, optical alignment, mechanical assembly, machine shop

and manufacture or precision metallic parts; ability to work

independently; ability to work in a team environment.

Job Description: Will be responsible for optical alignment and

testing of flight sensors; mounting and alignment of flight sensors

with flight optic assemblies, electro-mechanical and opto-

mechanical assembly of flight remote sensing instruments.



ST 415

Machine Shop-CNC

Full Time

Job Title: Maintenance Mechanic Job Number: 1424

Hours/Days: Must be available all shifts Salary: DOE


Requirements: Skills Requirements: High School diploma or GED; some

college preferred; 3 years experience as a Maintenance Mechanic

within a manufacturing environment; working knowledge of

hydraulic and air systems; ability to read and interpret documents

such as safety rules, operating and maintenance instructions and

procedures manuals written in English; ability to write routine

reports and correspondence in English; ability to speak effectively

before groups or employees; Spanish comprehension preferred;

basic math skills including the ability to add, subtract, multiply,

and divide in all units of measure, using whole numbers, common

fractions, and decimals.

Job Description: Responding to breakdown trouble calls and

brings machines to their proper running state, including

troubleshooting, diagnosing and fixing problems; receiving work

from shift supervisor or manager, and carrying out assigned duties

in a timely and accurate manner; performing mechanic duties at

all locations; completing assigned Preventative Maintenance

(PM) work on assigned machines; Dismantling, repairing, and re-

assembling gear boxes, fans, conveyors, blowers, compressors,

pumps, valves, furnaces, drives and all allied mechanical

equipment; reading and understanding blueprints for working

systems; promoting safety in the work area by understanding and

complying with safety procedures and reporting all accidents in a

timely manner.



ST 415

Machine Shop-CNC

Full Time

Job Title: Maintenance Foreman Job Number: 1425

Hours/Days: Must be available all shifts Salary: DOE


Requirements: Skills Requirement: Five years experience as an industrial

manufacturing maintenance mechanic; working knowledge of

mechanical, electrical, hydraulic and air compressed systems;

high school diploma or GED some college preferred; ability to

read and interpret documents such as safety rules, operating and

maintenance instructions and procedure manuals written in

English; ability to write routine reports and correspondence in

English; ability to speak effectively before groups or employees;

Spanish comprehension preferred; basic math skills including the

ability to add, subtract, multiply, and divide in all units of

measure, using whole numbers, common fractions, and decimals.

Job Description: Responds to breakdown trouble calls and bring

machines back to their proper running state; this includes

troubleshooting, diagnosing and fixing problems related to

electrical and mechanical equipment or process failures; receive

work from shift supervisor or manager; cooperate and collaborate

with operation personnel to ensure efficient production and

minimize downtime; complete assigned scheduled Preventative

Maintenance (PM) work on industrial bakery associated

downtime; dismantle, repair and re-assemble gear boxes, fans,

conveyors, blowers, compressors, pumps, valves, furnaces, drives

and all bakery mechanical equipment; read and understand

electrical schematics/mechanical blueprints; promotes safety in

the work area by understanding and complying with safety

procedures and reporting all incidents in a timely manner;

complies with Federal, State, City and A.I.B. Health and Safety

Standards, including OSHA (State and/or Federal) and Hazardous

Material regulation, in keeping with the work process and

chemical inventory by location.



ST 415

Machine Shop-CNC

Full Time

Job Title: Mechanical Assembler Job Number: 1431

Hours/Days: Mon-Fri Salary: up to $11/hr

Approximate Location: Chino, CA


experience in Mechanical Assembly; Strong Mechanical aptitude;

Be able to work well with others and maintain a professional

environment; Ability to work on multiple projects while

maintaining exceptional attention to detail; Experience in a

related field to the Utility/Power Industry is a plus; Construction

experience is a plus.

Job Description: Ability to use a variety of hand, air, and electric

tools; Must be very mechanically inclined and be able to work

with minimum supervision; Wood working including building

crates and pallets; Maintain a safe, clean and orderly work area;

Ability to read blue prints, make dimensional calculations, and

have a good overall sense of drawing requirements is a plus;

Understanding of reading blue prints in coordination with a bill of

material.



ST 415

Machine Shop-CNC

Full Time

Job Title: QA Inspector Job Number: 1434



Requirements: Skills Requirement: A minimum of 1 to 2 years previous Quality

Assurance System experience in a shop type environment; Good

knowledge of manufacturing and production processes; Strong

mechanical & electrical aptitude; Knowledge of sheet metal is a

plus; Able to work well with others and maintain a professional

environment; Good written and oral communication skills

required; Ability to juggle many projects while maintaining

exceptional attention to detail; Knowledge of Microsoft Word,

Excel, and Outlook is a must.

Job Description: Perform in-process and final inspection on

products. Inspections include paint, sheet metal, assembly, wiring,

and labeling; Maintain all quality documentation including QA

Manual, Complaint Reports, Production Documents, etc; Assist

with implementation of complete quality system to achieve ISO

9001 certification; Assist in company approval process with new

customers; Assist with quality inspections; Attend monthly QA

meetings; Other duties assigned by management.



ST 415

Machine Shop-CNC

Full Time

Job Title: Equipment Maintenance Lead Job Number: 1435




experience with a preventive maintenance program; Minimum 3-5

years of experience with a maintenance background; Experience

with managing 2-5 employees; Electrical and blue print reading

required; Strong Mechanical aptitude and Construction

experience; Electrical troubleshooting experience

(Machines/Forklifts Repairs); Must have own tools and is able to

use a variety of hand, air, and electric tools; Must be very

mechanically inclined and be able to work with minimum

supervision; Needs to be very dependable and lead by example;

Be able to work well with others and maintain a professional

environment; Ability to work on multiple projects while

maintaining exceptional attention to detail; Creative thinker /

problem solver and goal oriented; Experience with Microsoft

excel, word and office; Experience with a forklift; Must have a

clean driving record and valid Driver License o25% driving in a

company vehicle for items needed for the shop.

Job Description: Updating and maintaining accurate paperwork

including our Preventative Maintenance Program; Oversee the

preventive maintenance program; Service machines including

forklifts and conduct repairs; Assist with Safety trainings for Shop

personnel and be an active member of Safety committee;

Coordinate resources as necessary to achieve safe and efficient

results; Ensure that Maintenance and safety documentation is

accurate and completed; Maintain a safe, clean, and orderly work

area; Stock and organize all material as directed by Supervisors;

Coordinate and work closely with Management and other

departments to assure the attainment of production schedules,

quality goals, and safety objectives are met within deadlines

given; Other duties assigned by Management.



ST 415

Machine Shop-CNC

Full Time

Job Title: Conventional Machinist Job Number: 1441

Hours/Days: Mon-Fri 7a-3:30p Salary: DOE


Requirements: Skills Requirement: 5+ years experience in a machine shop

environment.

Set up and operate CONVENTIONAL Mills, Lathes, drills and

various machining tools and equipment.

Read blueprints. Read micrometers, calipers and other standard

measuring tools. MUST read, write, and communicate in English.

Job Description: Set up and operate Conventional Mills, Lathes,

drills and various machining tools and equipment; Make parts per

blueprints, sketches, drawings, specifications, or sample parts;

Select, align, and use holding fixtures, cutting tools, attachments,

and material on machines; Must have own set of basic tools.

Job Title: Machine Operator Job Number: 1469

Hours/Days: Rotating Shifts Salary: DOE

Approximate Location: Huntington Park, CA

Requirements: Skills Requirement: Two years experience operating production

machines; Basic English literacy (ability to communicate in

English); Team player; good communicator; Strong mechanical

knowledge; Ability to follow instructions; Able to lift 30 pounds.

Job Description: Maintain lines running safely and efficiently;

Check quality regularly (seals, ink, gauge, size, etc); Follow all

safety rules at all times; Support other operators when needed;

Work with QC and packers to help resolve any quality issue;

Communicate all line issues to Supervisor, Leads and or

Maintenance as appropriate; Keep work area clean and safe

always; Other duties may be assigned.



ST 415

Machine Shop-CNC

Full Time

Job Title: Maintenance Mechanic Job Number: 1468

Hours/Days: 8hours/day 5 days/week, rotating Salary: DOE

Approximate Location: Huntington Park, CA

Requirements: Skills Requirement: Must have all basic tools (specialized tools

will be provided); Strong Mechanical knowledge; Basic Electrical

knowledge (must be able to read and understand electrical and

mechanical blueprints); 5+ years industrial maintenance

experience (manufacturing); Plastics experience preferred; blown

film experience highly valued; Basic PLC troubleshooting

knowledge; Ability to work a flexible schedule (our shifts rotate

every 3 months; mornings, afternoons & nights); A hard working,

dependable, safety conscious individual with a strong work ethic;

A self-starter who requires little to no supervision; Strong math

and problem solving skills; Must have basic computer skills

including Microsoft Word, Excel & Outlook (e-mail); Clear

competent communication in English, both verbal and written.;

Preferred: High school diploma or GED.

Job Description: This position requires a multi-skilled person to

perform all phases of maintenance within our organization.

Multi-tasking of both mechanical and electrical skills to maintain

our equipment and processes. To be capable of performing tasks

required to rebuild, modify or adjust our equipment and processes

related to producing the best product possible. To follow and

carry out the tasks assigned efficiently and completely. To train

others as required.



ST 415

Machine Shop-CNC

Full Time

Job Title: Lead Mechanic Job Number: 1479

Hours/Days: 6a-2:30p or 7a-3:30p Salary: $28.50-29.00

Approximate Location: Culver City, CA

Requirements: Skills Requirement: Worked or exposure in a manufacturing

environment and raw material / component warehouse;

Participated in annual physical inventory and subsequent cycle-

count activities; Ability to multi-task and prioritize activities,

scheduling, and laying out assigned work activities.; Bilingual in

Spanish preferred.; Technical aspects in the field of Electronics,

Programmable Logic Controllers, and Mechanical Concepts;

Knowledge of trade tools, equipment, materials, and methods and

techniques used in General maintenance.

Job Description: Schedule and direct a crew of Maintenance

Mechanics &Facility Mechanics involved in craft specialties.;

Provide training, work direction and guidance while performing

work in one or more skilled trades.; Schedule maintenance work

and determining equipment and supply needs, and work order

requests; Provide input for performance review completion, and

monitor work assigned to crew members; Prioritize, schedule,

assign, and coordinate the work to be performed by staff to

accomplish a variety of skilled work and repair of the physical

plant and equipment; Assure compliance with appropriate safety

practices and procedures and with Federal, State, Local codes,

and Company regulations; Assist in the purchase, installation, and

IQOQPQ validation of equipment, and provide training to

maintenance and production personnel in the safe use of

equipment; Estimate the cost of labor and materials for work

orders; and validate the work performed by outside contractors

when used for maintenance activities; Purchase tools, supplies

and materials within budgetary restrictions; Perform other duties

as assigned.



ST 415

Machine Shop-CNC

Full Time

Job Title: Multi-Craft Maintenance

Mechanic

Job Number: 1506

Hours/Days: Days and Nights Salary: $22-26/hr

Approximate Location: Santa Fe Springs, CA

Requirements: Skills Requirement: High school diploma or GED.; Minimum of

five years maintenance work experience as a millwright/machinist

(industrial setting preferred) or Journey level

millwright/machinist designation.; A complete employment

application that explains a detailed work history required (resume

must cover at least 5 years' work experience in a

millwright/machinist position); Must be able to demonstrate high

level of knowledge/technical capability in welding, pipefitting

and millwright maintenance work. A satisfactory

millwright/machinist demonstration will be required from

qualified candidates prior to receiving employment offer.; Able to

demonstrate basic computer skills, math and problem-solving;

mechanical, numerical and verbal aptitude to learn our jobs

quickly; Must be able to work call-ins and overtime when support

is needed.; Able to pass a functional physical testing and able to

use standard safety equipment; must be able to lift up to 50

pounds.; Able to climb ladders/stairs and work at heights.; Able to

work in tight or closed-in spaces •Pass a physical, drug screen and

background check if job offer is received and accepted.

Job Description: He or she will perform daily reporting and

tracking of activities (some of this work will be done using SAP

on the computer system); provide immediate response to

production needs and requirements; and act in compliance with all

Safety Policies/Regulations. This position requires working

overtime when support is needed. This role works as a machine

and equipment repairer and performs a variety of mechanical

maintenance duties at a chemical plant. He or she will repair,

recondition, rebuild, fabricate, test and perform predictive

maintenance on plant equipment, tools and fixtures and also plan

the sequence and method of fabrication and repair work.



ST 415

Machine Shop-CNC

Full Time

Job Title: Recruiter Job Number: 1510

Hours/Days: Mon-Fri 6:30a-3p Salary: $10/hr

Approximate Location: Cerritos, CA

Requirements: Skills Requirement: Soldering experience required and previous

assembly. HS diploma and GED minimum and must pass

criminal background and screening.

Job Description: Assemblers with soldering and/or microscope

experience.



ST 415

Machine Shop-CNC

Temporary

Job Title: Quality Inspector 3-TTJ-2780 Job Number: 1465

Hours/Days: Mon-Fri (9/80) Salary: TBD


Requirements: Skills Requirement: Minimum 3 years previous experience;

Defense/Aerospace experience preferred; ability to read and

interpret schematics, blueprints; knowledge of GD&T; ability to

lift up to 25lbs; knowledge or familiar with ANSIY14.5M

Geometric Dimension and Tolerance; knowledge and experience

in inspecting molded plastic and rubber products, ceramic,

connector and cable assemblies; familiar with First Article

Inspection (FAI) process and familiarity with AS9100

requirements a plus; computer literate and familiar with using

Microsoft Office products including email; detail oriented and

organized with good verbal and written communication skills.

Job Description: Approves incoming materials by confirming

specifications; approves in-process production by confirming

specifications; approves finished products by confirming

specifications; documents inspection results by completing

reports and logs; keeps measurement equipment operating by

following operating instructions; prepare and interface with both

customer and government source.



ST 415

Machine Shop-CNC

Temporary

Job Title: Product Quality Inspector 3-TTJ-

2825

Job Number: 1492

Hours/Days: Mon-Fri (9/80) Salary: TBD


Requirements: Skills Requirement: High School diploma or equivalent, some

college coursework preferred; 3-5 years related experience of

inspection of cable, detail and electro-mechanical assemblies per

specs and drawings; Ability to lift 50 lbs.; Problem

solving/Investigation skills; Read and comprehend blueprints,

geometric tolerancing; ANSI knowledge; Geometric tolerancing;

Experience with measurement tools, microscopes, and inspection

equipment; Familiarity with MS Office; Knowledge and use of

CMM a plus; Must be able to perform basic arithmetic functions.;

Must be able to effectively communicate both written and verbal,

and comprehend drawings, specifications and Engineering

instructions.; Must be a U.S. person or U.S. citizen.

Job Description: Inspection of machined, molded, plastic, plated

parts; Inspect cable harness and electro-mechanical assemblies;

Internal in-process and final inspection and configuration review;

Assist with all inspection related prototype activities; Conduct

source inspection at suppliers facilities as required.

Date post:	14-May-2018
Category:	Documents
Upload:	truongphuc
View:	218 times
Download:	3 times