+ All Categories
Home > Documents > LOW PROFILE “LB” BEVELERIntroducing Wachs new “LB” low profile beveling machine designed for...

LOW PROFILE “LB” BEVELERIntroducing Wachs new “LB” low profile beveling machine designed for...

Date post: 17-Jul-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
2
LOW PROFILE “LB” BEVELER COMPETITIVE RENTAL RATES Smallest and lightest beveler in its class Minimal side clearance for use in tight areas. Universal tooling fits all Wachs bevelers. FEATURES Permanently attached feed and clamp ratchets Captivated clamp leg sets Self centering Mandrel Wedge style “tool locking” system 4 tool rotating head Torque free operation 6’ hose whip with swivel standard Introducing Wachs new “LB” low profile beveling machine designed for work environments where size and clearance present a machining problem. The LB delivers maximum power while offering reduced size and weight. Weld prepare tube/pipe from 1.250” I.D. to 4.5” O.D. (29.4mm to 114.3mm) up to .500” (12.2mm) wall quickly and accurately.
Transcript
Page 1: LOW PROFILE “LB” BEVELERIntroducing Wachs new “LB” low profile beveling machine designed for work environments where size and clearance present a machining problem. The LB

LOW PROFILE“LB” BEVELER

COMPETITIVERENTALRATES

• Smallest and lightest beveler in its class

• Minimal side clearance for use in tight areas.

• Universal tooling fits all Wachs bevelers.

FEATURES• Permanently attached feed

and clamp ratchets

• Captivated clamp leg sets

• Self centering Mandrel

• Wedge style “tool locking” system

• 4 tool rotating head

• Torque free operation

• 6’ hose whip with swivel standard

Introducing Wachs new “LB” low profile beveling machine designed for work environments where size and clearance present a

machining problem.

The LB delivers maximum power while offering reduced size and weight. Weld prepare tube/pipe from 1.250” I.D. to 4.5” O.D.

(29.4mm to 114.3mm) up to .500” (12.2mm) wall quickly and accurately.

Page 2: LOW PROFILE “LB” BEVELERIntroducing Wachs new “LB” low profile beveling machine designed for work environments where size and clearance present a machining problem. The LB

LB BEVELER SPECIFICATIONS

MADEIN

U.S.A

Machining Function:

Capacity:

Feed:

Drive:

Air Requirements:

Air motor:

Tooling:

I.D. Chucking Range:

Installation:

Weight:

Controls:

Standard Equipment:

Optional Equipment:

Tube/pipe weld preparation

Machine 3.5” O.D. (88mm) Standard up to .500 (12.2mm) wall max.

Manual ratcheting

Pneumatic

35 cfm @ 90 psi max.

1.0 HP

High speed steel form tools

1.250” to 3.0” I.D. (31.8mm to 76.2mm) Standard

5 minute set up. Less than 30 seconds change over from tube to tube

20 lbs. (9.1kg)

Manual ratcheting tool in-feed. On/Off hand grip with safety

Basic LB machine, air motor, 6’ hose whip w/swivel, cutting head, standard

Extended range option includes 3 leg sets and tool head

Machine 4.5” O.D. (114.3mm) with extended range option up to .500”(12.2mm) wall max.

3.0” to 4.2” I.D. (76.2 to 106.6mm) with extended range option

mandrel with leg set, installation tools, storage case and operating manual.

“A” Dimension: 3.19”“B” Dimension: 16.9”“C” Dimension: 14.5”“D” Dimension: 3.25”“D” Dimensionw/ optional Tool Head 4.25”

E.H. Wachs Company100 Shepard St. Wheeling, IL 60090Phone: (847) 537-8800 (800) 323-8185 • Fax: (847) 520-1147 • wachsco.com


Recommended