+ All Categories
Home > Documents > LP ROUND CONCRETE BUCKET SKIP PAN MATERIAL...

LP ROUND CONCRETE BUCKET SKIP PAN MATERIAL...

Date post: 16-Apr-2018
Category:
Upload: lythuy
View: 217 times
Download: 4 times
Share this document with a friend
4
"LP" ROUND CONCRETE BUCKET "SKIP PAN" MATERIAL HANDLER
Transcript
Page 1: LP ROUND CONCRETE BUCKET SKIP PAN MATERIAL …garbro.com/brochures/pdf/LOW_PROFILE_AND_SKIP_PAN... · standards which are said to "meet or exceed the standards set forth in ASME B30.20

"LP" ROUND CONCRETE BUCKET"SKIP PAN" MATERIAL HANDLER

Page 2: LP ROUND CONCRETE BUCKET SKIP PAN MATERIAL …garbro.com/brochures/pdf/LOW_PROFILE_AND_SKIP_PAN... · standards which are said to "meet or exceed the standards set forth in ASME B30.20

LOW PROFILE LIGHTWEIGHTCONCRETE BUCKETSGar-Bro Low Profile Lightweight Round Buckets or "LP" Series are engineered to the highest standards which are said to "meet or exceed the standards set forth in ASME B30.20 'Below the Hook Lifitng Devices'." They include all the same features and advantages as the Gar-Bro "R" Series buckets with with a lower loading height. Buckets include industry standard 15-inch x 22-inch "grout tight" double clamshell gate, "bar" type lifting bail, and will accept optional accordion hoppers, side chutes, and extension collars.

Exceptionally low loading height**Allows for hassle-freecharging out of standard rear-loading transit mixtruck at 3 yard uprightcapacity**

Bail-type operatinghandle (rope-pullcontrol possible)

Self-closing, "grout tight"15-inch x 22-inch doubleclamshell gate

Variety of attachementsavailable: Rubberaccordion hoppers, steelsub-hoppers, air orhydraulic gate operation,side chutes

482-LP 3 81.8 76 61 825

4110-LP 4 110 76 72.5 1,000

ItemNo.

RatedCapacity

CubicYards

LevelCapacity

CubicFeet

OutsideDiameterInches

LoadingHeightInches

WeightPounds

One-piece lifting balldesign reduces obstructionsin bucket top opening area,making charging operationeasier and faster

Page 3: LP ROUND CONCRETE BUCKET SKIP PAN MATERIAL …garbro.com/brochures/pdf/LOW_PROFILE_AND_SKIP_PAN... · standards which are said to "meet or exceed the standards set forth in ASME B30.20

GENERAL PURPOSE SKIP PANSGar-Bro General Purpose Skip Pans are ideal for a variety of uses around the jobsite such as building material transport or concrete bucket washout. Gar-Bro Skip Pans are fully welded to prevent seepage, "nest" stack for easy transport and storage, and are designed to the highest standards. They "meet or exceed ASME B30.20 'Below the Hook Lifting Devices'.

4KSP248 4,000 96 48 246KSP2410 6,000 120 48 248KSP2510 8,000 120 60 24

ItemNo.

CarryingCapacityPounds

LengthInches

WidthInches

HeightInches

Tapered on all four sidesfor nested stacking

Optional Fork Pocketsavailable (not shown)

Fully welded to prevent seepage. Drain plug located at back.

6 lifting eyes.4 located at top.2 located bottom back for dumping.

Optional 4-leg proof testedwire rope sling available.

Page 4: LP ROUND CONCRETE BUCKET SKIP PAN MATERIAL …garbro.com/brochures/pdf/LOW_PROFILE_AND_SKIP_PAN... · standards which are said to "meet or exceed the standards set forth in ASME B30.20

• Fork pockets optional at additional charge.• Optional Proof tested wire rope rigging available.• Custom sizes and capacities are possible. Contact the engineers at Gar-Bro for a detailed quotation.

installed on almost anyOptional fork pockets

Gar-Bro bucket will allowuse of a forklift to safelymove the bucket. Availableat extra cost in many sizes and locations to suit almost any application. Call the factory for more details.

Accessories for Gar-Bro"LP" Series Concrete Buckets

OptionalFork Pockets

Skip Pan Accessories

Opitional Accordion Hopper OptionalExtension Collars

P.O. Drawer 1077 l 104 Bolton Sullivan Drive l Heber Springs, Arkansas 72543-1077Phone: (501) 362-8171 l Internet Address: http//www.garbro.com l E-Mail: [email protected] Toll Free Number: (800) 643-8192 l 24 HR Toll Free Fax: (888) 643-8192 l Fax: (501) 362-7123


Recommended