PRODUCTSCATALOGUELPG/CNG

PERFECT AUTOGAS INSTALLATIONSwww.lpgtech.com

1 | WWW.LPGTECH.COM

Krzysztof ŁapińskiPresident of the Board

LPGTECH ON THE WORLD

our company we strongly focus on R&D and continuous improvement of our design – beginning with mechanical components through electronic controllers to the software cooperating with computers, tablets and smartphones. While

introducing new products we combine innovation with reliability and ultimate functionality, which means the ease of installation and maintenance. LPGTECH’s products are the perfect combination of professionalism, knowledge, years of experience of our engineers and the quality of applied components.

Following global automotive trends we challenge ourselves to introduce new, innovative technologies, which are fully tested in our R&D Laboratory. This give us an opportunity to provide state-of-the-art technical solutions to our clients.

According to motto "Perfect Autogas Installations", we offer reliable products with a long-term warranty, verified by PN-EN ISO 9001:2009 quality standards.

LPGTECH LLC is a leading global manufacturer of components and LPG/CNG systems for automotive industry.

In

THE INTRODUCTION

| 2PERFECT AUTOGAS INSTALLATIONS

We pay attention to protect our products during transportation. Each set is securely packed in a high load resistant box which has been proved in durability tests. The whole package is stylish in its design.

LPGTECH R&D Laboratory we test new technologically advanced products that excel in innovation on the domestic and international market. Highly qualified and experienced engineering staff and extensive research facilities

guarantee to meet the expectations of even the most demanding customers.

Unique in Europe, the original combination of chassis dynamometers with a very accurate, selective exhaust gas analysis combined with a detailed online engine work analysis gives us virtually unlimited possibilities to research all types of vehicles with gasoline and diesel engines.

The R&D laboratory is an essential support for constructors working on new autogas systems; including liquid gas injection for direct fuel injection engine.

At

LPGTECH RESEARCH AND DEVELOPMENT LABORATORY

SECURE PURCHASE

3 | WWW.LPGTECH.COM

ECONOMY LINE

TECH ONELPG/CNG injection controller

TECH ONE combines modern innovations and tested solutions.

Due to a small, compact cover and 24-pin connector the fitting is much easier and faster. The use of a digital control panel made it possible to reduce the number of communication cables which facilitates threading the bulkhead. Semiconductor petrol injectors emulators provide precision and reliability of switching between different fuel types and offer the possibility of additional extra-injection gasoline while working on gas or alternating injections. Proper engine management is ensured by algorithms tested and developed over the years by LPGTECH designers. They provide the possibility to calibrate the car in every field of engine work. Additional adjustments of pressure, temperature and RPM make the regulation more precise.

TECH ONE is the perfect choice to reduce the cost of gas instalation in the 4-cylinder engine which does not requires the use of gas injection controller that supports the car OBD.

»»»»»»»

Up to 4 cylinders engines supportNew, compact designFast, simplified installation3-wires digital control panelPetrol injectors emulators based on semiconductorsTECH and Standard fueling control alghoritmsInnovative control algorithm TECH with autocalibration system ACTA and autoadaptation AATA

»»»

»»»»

3D fuel mapBar and linear graph of differential injection times Additional correction maps based on gas temperature, gas pressure, reducer temperature and RPMAutodiagnosis of installation faultsThe full circuit and overload protectionComposite case24-pin connector

| 4PERFECT AUTOGAS INSTALLATIONS

MEDIUM LINE

TECH-224LPG/CNG injection controller

»»»»

Up to 4 cylinders engines supportTECH and Standard fueling control alghoritmsWorking with external TECH-OBD scannerCompatible with Valvetronic/Multiair and rotary engines

»»»»

Autodiagnosis of installation faultsFull short-circuit and overload protectionComposite case48-pin connector

SERIES

TECH-320TECH-324, TECH-326, TECH-328

LPG/CNG injection controller

»»»»

Up to 4/6/8 cylinders engines supportTECH and Standard fueling control alghoritmsCompatible with TECH-OBD scannerCompatible with Valvetronic/Multiair and rotary engines

»»»»

The full circuit and overload protectionCompatible with MultiTECH (up to 16 cylinders support)Aluminium case56-pin connector

5 | WWW.LPGTECH.COM

PREMIUM LINE

SERIES

TECH-320 OBDTECH-324 OBD, TECH-326 OBD, TECH-328 OBD

LPG/CNG injection controller

The controllers from this series are designed for 4/6/8 cylinder engines (depending on version). Parallel connection of two controllers is possible - it enables to control the flow of the gas in 10/12/14/16 cylinder engines. TECH 320 OBD series provide the same functions and security features as TECH 320 series - ensuring excellent quality and performance.

TECH 320 OBD series communicate with protocols: CAN (11/500; 29/500; 11/250; 29/500), ISO 14230 slow, ISO 14230 fast and ISO 9141. Connection with car OBD system uses only two wires regardless of protocol. After connection with car, OBD system controller picks up and saves in table fuel trim values on petrol and gas. OBD adaptation based on this data self-adjusts mixture composition to reach perfect autogas system calibration.

TECH 320 OBD series has automatic error deletion function. When fault code stored in table „codes to delete” (up to 8) comes on controller, it clears ECU memory automatically. When readed code doesn't exist in the table, controller will not clear faults memory to alert the driver about problem in engine system by „check engine” light.

Additional advantage of TECH 320 OBD series is a possibility to use the controller to read/erase diagnostic trouble codes and read all engine parameters, like a standard OBD scanner.

TECH-320 OBD is series of microprocessor controllers in an aluminium casing for a traditional 56-pin wire harness.

»»»»

Up to 4/6/8 cylinders engines supportTECH and Standard fueling control alghoritmsIntegrated OBD moduleSupported protocols:ISO 15765-4 CAN (11 bit ID, 500 Kbaud); ISO 15765-4 CAN (29 bit ID, 500 Kbaud);ISO 15765-4 CAN (11 bit ID, 250 Kbaud); ISO 15765-4 CAN (29 bit ID, 250 Kbaud);ISO 14230-4 KWP (fast init, 10.4 Kbaud); ISO 14230-4 KWP (5 baud init, 10.4 Kbaud);ISO 9141-2 (5 baud init, 10.4 Kbaud)

»»»»»»

Compatible with Valvetronic/Multiair and rotary enginesAutodiagnosis of installation faultsFull short-circuit and overload protectionCompatible with MultiTECH (up to 16 cylinders support)Aluminium case56-pin connector

| 6PERFECT AUTOGAS INSTALLATIONS

SCANNER TECH-OBDDiagnosis and communication OBD module

»»»»»

»

Direct cooperation with TECH controllersAbility to work as Diagnostic Scan Tool/Code readerDirect, real time readout of engine parametersFull diagnostic and error erasing possibilities Connection via OBD plug or "wires to soldering" cableComposite case

»

»»

Supported protocols:- ISO 15765-4 CAN (11 bit ID, 500 Kbaud); ISO 15765-4 CAN (29 bit ID, 500 Kbaud);- ISO 15765-4 CAN (11 bit ID, 250 Kbaud); ISO 15765-4 CAN (29 bit ID, 250 Kbaud);- ISO 14230-4 KWP (fast init, 10.4 Kbaud); ISO 14230-4 KWP (5 baud init, 10.4 Kbaud);- ISO 9141-2 (5 baud init, 10.4 Kbaud);- SAE J1850 VPW (10.4 Kbaud); SAE J1850 PWM (41.6 Kbaud)

Connecting cable includedThe service wire to connect as an independent OBD reader (additional option)

The exceptional feature of TECH-OBD Scanner is the ability to use it as an independent OBD reader, so apart from reading corrections and errors there is possibility to check car parameters provided by built-in OBD controller of the vehicle.

Independent OBD reader

When „AUTOMATIC ADAPTATION” is active, OBD system automatically modifies composition of the mixture, to obtain differences in the maps close to zero, thus having ideally calibrated autogas system.

Automatic adaptation

TECH-OBD scanner combined with TECH-224 controller or TECH-320 series controller provides automatic errors deletion (up to 8 trouble codes) which means automatic erase of which were previously defined in the table. In case of different faults automatic deletion would not be active in order to „check engine” light notify driver about problem in engine system.

Errors deletion

7 | WWW.LPGTECH.COM

MODULAR SUPPLY RAIL» Rotational output ports» Possibility to connect any number of modules» Rail finished with plug or input port

» Gas entry diameter - Φ 12mm» Output port - Φ 5mm / 6mm

»»»»

Versions: 2,3,4 cylinders railCoil resistance: 2ΩOpening time / closing < 2,0 ms / < 1,0 msMax gas pressure: 4,5 bars

Working temperature range: -20°C - +120°COutput nozzles "D4" or "D6" and supply port includedThe maximum diameter of the output nozzle: 3mm or 5mmWarranty: 2 years

»»»»

TECH-DRAGONGas injection rail

TECH-DRAGON SoloSingle montage injector

| 8PERFECT AUTOGAS INSTALLATIONS

»»»»

Versions: 2,3,4 cylinders railCoil resistance: 2ΩOpening time / closing < 2,2 ms / < 1,0 msMax gas pressure: 4,5 bars

»»»»

Working temperature range: -20°C - +120°COutput nozzle "D6" and supply port includedThe maximum diameter of the output nozzle: 5mmWarranty: 2 years

TECH-DRAGON SoloSingle montage injector with increased flow

TECH-DRAGONGas injection rail with increased flow

9 | WWW.LPGTECH.COM

BlueTECHxt

Wireless communication module

OptoTECHWire communication module

»»»»»

Wire communication with TECH controllersUSB / RS-232 interfaceTransmission speed - up to 1MbpsOptical separation between devicesCable length: 3m / 5m

»»»»»

Bluetooth technologyWireless communication with TECH controllersRange - up to 100mCommunication to controller - RS-232Power class - 1

»»»

More than 1,300 active members and 3,000 installationsDeveloping based on on user suggestionsAvailable on Google Play for free

»»»»»»

Available for ANDROID system from version 2.2Supports over 7900 different mobile devicesWireless Bluetooth communicationQuick and easy tuning of LPG/CNG systemIntuitive interfaceSimple Mode - for the end user

GASDROIDMobile application for configuring and tuning the LPGTECH installation

| 10PERFECT AUTOGAS INSTALLATIONS

MultiTECHTwo TECH controllers connecting module

TECHLevelGas level sensor in tank

»

»»

Module connecting two TECH-xx6 and TECH-xx8 seriesProvides support up to 16 cylinders enginesMASTER / SLAVE operating mode

»»»»

No mechanical partsMeasurement technology - Hall effect12V power supplyConnecting cable supplied

TECHTronic 2.0MAF signals conversion module

»»

»

New version of the Techtronic emulatorFully configurable input and output chacacteristics via PCConversion of MAF signals for Valvetronic systems

»

»»

Possibility to convert all types of digital and PWM flowmeter output signalsDigital to analog signal converterConnecting cable supplied

11 | WWW.LPGTECH.COM

EmuTECH Pb-Level-02Petrol level indicator emulator

»»

New version of the emulator EmuTECH Pb-LevelCompatible with vehicles where fuel level is calculated by vehicles body computer

All vehicles compatibilityEnsures proper petrol level indication after every engine start

»»

EmuTECH Pb-Pressure-02Petrol pressure emulator

»

»

»

First on the world properly working fuel pressure emulator compatible with all vehicle types (supports low- and high-current PWM)Fuel pressure is emulated in response to engine control unit requestConfigurable via PC

»

»

Emulator not only emulates the indicated value of fuel pressure sensor in response to the request of the petrol controller, but itself controls the pump to maintain proper fuel pressure in the railAdditional fuel pump control feature holds up rail pressure on demanded level

| 12PERFECT AUTOGAS INSTALLATIONS

»»»»»»»»

Made from the highest quality materialsResistant to substances contained in LPGTesting strength pressure: >200 barsResistant to mechanical damageResistant to extreme temperature changesPerfect replacement for copper pipesAvailable fittings angles: 90º , 180ºE20 67R 01-1027 homologation

LPGTECH THERMOPLASTIC HOSEThermoplastic hose with fittings

Hose names and diameters (int/ext):

TH-6L-B4,8 / 8,8mm(on request)

TH-6F-B5,0 / 9,6mm

TH-8L-B6,5 / 11,4mm(on request)

TH-8F-B6,5 / 12,2mm

13 | WWW.LPGTECH.COM

FILTER Perfect BlueLPG volatile phase filter with oil fractions separation

»»»

»

99% filtration efficiency for particles of 1μmStops liquid and solids particlesThe filter cartridge - cellulose paper reinforced by synthetic fiberReplaceable filter cartridge

»»»»»

Maximum pressure range: 4,5 barsWorking temperature: -20°C - +120°CGas outlets diameter: Ø 10.6/12mmUnit dimensions: 120mm x 110mm x Ø 68mmSump capacity: 80ml

SPINFORCE

99% FILTRATIONEFFICIENCY

LEAK DETECTORFoam leak detector

»»»»»

Finds leaks in LPG/CNG installationsCan be used on metal and plastic surfacesNo cleaning necessity after usageDoes not cause corrosionOptimal density for leak detection

»»»»»

Works in any positionCapacity of 400 milliliters Working temperature: -8°C - +35°CEasy use with long strawEnvironmentally neutral product

WORKS INANY POSITION

| 14PERFECT AUTOGAS INSTALLATIONS

PREMIUM LINE

PACK 328 OBDSample of LPGTECH completion

www.lpgtech.com

LPGTECH LLC67 Dojnowska Street15-557 Białystok, Polandexport@lpgtech.pltel. +48 85 734 13 10

15/05/v2