LR Mate 200iD/4S R-30iB Plus Certified Robot Training
Package
LR Mate 200iD/4S R-30iB Plus Education Training CERT Packages
for Material Handling (MH)
LR Mate 200iD/4S Robot with R-30iB Mate Plus Controller • Six
Axis Mechanical Robot (550mm reach)
•
•
R-30iB Mate Plus Controller
LR Handling Tool Software – CERT Configurationincludes Advanced
DCS & 4D graphics, Collision Guard, $4,000 package:- Advanced
DCS Package includes the most popular and most frequently used
safety options and the powerful4D Graphics option in a single,
cost-effective package. This option includes DCS Pos./Speed check,
DCS Safe I/O connect and 4D Graphics
- Collision Guard Pack
• MH iPendant with Touch Screen - R-30iB Mate Plus
MH1 Education Training Cart • Mobile Training Safety Enclosure•
Double Side Door with 2 interloc switches• Education Tooling
Package• 120VAC Transformer• 4.6 Gal. Ultra Quiet Air
Compressor
Set of the following Instructor Manuals - (1) FANUC Robot
Operations - MATGGROOP1114CE- (1) FANUC HandlingTool Operations
& Programming - MATAGHAND02131E- (1) FANUC HandlingPRO
(ROBOGUIDE Simulation) - MATOGHPR21109CE
UPGRADE from LR Mate 200iD/4S (550mm reach) to LR Mate 200iD
Robot (717mm reach)
CART Dimensions: 47 ¼” L x 32 ½ “W x 72” H
LR Mate 200iD/4S Reach: 550mm Payload: 4kg
LR Mate 200iD Reach: 717mm Payload: 7kg
(844)844) 447-8644 www.istohio.com [email protected]
Mission of the FANUC MH Certified Education Robot Training
ProgramFANUC’s RoleCertified Education Robot Training RoleEducation
Training Cart from FANUC1.1 NSR-3iA SCARA R-30iB Compact Plus
Education Training CERT Packages for Material Handling (MH)1.2
M-1iA/0.5A R-30iB Plus Education Training CERT Packages for
Material Handling (MH)1.3 LR Mate 200iD/4S R-30iB Plus Education
Training CERT Packages for Material Handling (MH)1.4 FENCELESS - LR
Mate 200iD/4S R-30iB Plus Package for Material Handling (MH)1.5
CR-4iA R-30iB Education Training CERT Package for Material Handling
(MH)Operator of collaborative robot must complete Collaborative
Robot Operations & Programming Class and DCS Class prior to
delivery.CR-35iA Standalone Robot1.7 CR-35iA R-30iB Package for
Material Handling (MH)**Operator of collaborative robot must
complete Collaborative Robot Operations & Programming Class and
DCS Class prior to delivery.*Operator of collaborative robot must
attend HandlingTool Operation and Programming Class prior to
Collaborative Operations Training Class. Existing CERT instructors
who have successfully completed the HT class are not required to
retake it.1.8 Educational Training Packages1.9 CERT Options1.10
Integrated Conveyor Options1.11 iRVision 2D Guidance Hardware &
Software**REQUIRES 2D iRVision CERT Instructor Program (page
15)1.12 Gripper Options1.13 FANUC Advanced Manufacturing M10/M20
CERT Cell1.14 LR Mate/Levil Combo Unit1.15 I/O Simulation Box1.16
AMATROL to FANUC LR Mate CERT Cart – Conversion Option1.17 PCDK –
PC Developer’s Kit & PC Interface Software Option1.18 AMTEC
Simulator Pricing Agreement
2.1 SCARA SR-3iASR-3iA SCARA Robot with R-30iB Compact Plus
1-Phase CE/NRTL Approved Controller and LR HandlingTool Software*
Special pricing good only when purchased with a new robot.SR-3iA
Four Axis Mechanical Unit (3 kg Maximum Payload, Floor Mount, 400mm
Reach, 200mm Stroke) with:CE/NRTL Approved FANUC SYSTEM R-30i B
Compact Plus Controller with:Note:Touch panel iPendant, teach
pendant cable, Switch box (Operator Panel) and User-side EE
connector are not included. Please purchase these items separately
if required.Product Documentation CD:Includes HandlingTool Software
(V9.xx), SR-3iAMechanical Unit, and R-30iB Compact Plus Controller
Documentation.2.2 FANUC M-1iA/0.5A 6-Axes Robot with Single Phase
R-30iB Mate Rack Mount (Open-Air) Controller and LR HandlingTool
Software(Compliant with new RIA R15.06 Safety Requirements)2.3
FANUC LR Mate 200iD/4S (Short-Arm) Robot with 6 Axes brakes with
NRTL approved, Single Phase R-30iB Mate Controller and LR
HandlingTool Software (Compliant with new RIA R15.06 Safety
Requirements)2.6 CR-7iA Robot with NRTL approved R-30iB Mate
Controller and LR Handling Tool Software2.7 CR-4A Robot with
Enet/EE NRTL approved R-30iB Mate Controller and LR Handling Tool
Software2.8 MH Certified Education Training (CERT) Program2.9
iRVision Certified Education Robot Training (CERT) Program
(REQUIRED with schools first purchase of 2D iRVision)2.11 LIVE
TRAINING: iRVision Operation and Programming - 2D 24 hours (2.0
CEU); Course Code: iRVision-2D
