9
WWW.FUTUREAUTOMATION.NET LSM-S-BE 2 TECHNICAL SHEET ISSUE 003 SHEET 1 LIFT SYSTEM SWIVEL FOR BOX ENCLOSURE UK +44 (0) 1438 833577 US +1 (603) 742 9181
WWW.FUTUREAUTOMATION.NET
LSM-S-BE 2
TECHNICAL SHEETISSUE 003
SHEET 1
LIFT SYSTEM SWIVEL FOR BOX ENCLOSURE
UK +44 (0) 1438 833577 US +1 (603) 742 9181
SPECIFICATION MEASUREMENTSMaximum Screen Height 484mm (19.0")
Maximum Rotation 180 in each direction
Maximum Lifting Capacity 50Kg (110lb)
Maximum Lifting Capacity (Marine) 30Kg (66lb)
Internal Cabinet Height 694mm (27.3")
Decibel Rating 52 dB
Packaging Dimensions 880 x 850 x 330mm (34.6 x 33.5 x 13")
Shipping Weight 34kg (75lbs)
Movement Type Motorised
Power Supply Required 110V - 240V AC
Power Consumption 250 - 500W
Power Consumption Standby 3W
Mounting Patterns Supported VESA 400, 300, 200 W x 400, 300, 200 H
Control Options IR Remote, RS232, Contact Closure, RF Available
Product Options / Features Specific B&O and Loewe mounts / adapters, Custom RAL paint finishes
Package Contents Mechanism, IR remote control
Marine Suitable Yes
WWW.FUTUREAUTOMATION.NET
LSM-S-BE 2
TECHNICAL SHEETISSUE 003
SHEET 2
LIFT SYSTEM SWIVEL FOR BOX ENCLOSURE
UK +44 (0) 1438 833577 US +1 (603) 742 9181
5.9150
2.052
8.1207
ATo MainsPower
DETAIL A
POWER CABLE
PP
1.538
Maximum Possible Depth of Conduit
TOP VIEW
CABLE ROUTINGThe LSM has an easily removable Mount Cover that cables from the screen can be routed underneath. Cables then travel through the centre of the Mount Boss and into the beam. Cables must be routed carefully to prevent any interference with the LSM beam as it operates.
Screen and Mechanism cables should be routed to a control box outside of the cabinet via an opening in the back of the cabinet or a conduit leading to the bottom.
SCREEN CABLESMECHANISM CABLES
WWW.FUTUREAUTOMATION.NET
LSM-S-BE 2
TECHNICAL SHEETISSUE 003
SHEET 3
LIFT SYSTEM SWIVEL FOR BOX ENCLOSURE
UK +44 (0) 1438 833577 US +1 (603) 742 9181
27.3694
InterbalCabinetHeight
20.0509
InternalBox Enclosure
Height
Box EnclosureInternal Width =
Screen Width+ 40mm [1.6]
0.820
Max Thicknessof Base andCabinet Top
0.820
0.820
Internal Cabinet Width = Screen Width+ 100 [3.9] Minimum Width = 850 [33.4]
B
B
CC19.1484Max
ScreenHeight
6.1154
4.2106
Back of Cabinetto Mount
D
SECTION B-B
0.13
Base Panel toCabinet Aperture
0.26
Box Enclosureto Cabinet Aperture
0.820
Minimum Distance from Screento Inside of Cabinet
SECTION C-C
Aperture Depth =Screen Depth + 83 [3.25]
(Minimum 121 [4.75])
1.846
DETAIL D
MECHANISM UP - IN CABINET
WWW.FUTUREAUTOMATION.NET
LSM-S-BE 2
TECHNICAL SHEETISSUE 003
SHEET 4
LIFT SYSTEM SWIVEL FOR BOX ENCLOSURE
UK +44 (0) 1438 833577 US +1 (603) 742 9181
27.3694
InternalScreenHeight
20.0509
InternalBox Enclosure
Height
7.9200
Minimum ScreenHeight from Base
of Cabinet
0.820
MaximumThickness
of Base andCabinet Top
0.410
Minimum Distancebetween Box Enclosure
and Cabinet
E
E
19.1484Max
ScreenHeight
4.2106
Back of Cabinetto Mount
6.5164
F
SECTION E-E
DETAIL F
Shown with tapered Box EnclosureLid in square Cabinet Aperture.A tapered Cabinet Aperture can beused to improve the fit.
Aperture Width = Screen Width +92mm [3.6]
Aperture Depth =Screen Depth + 83 [3.25]
(Minimum 121 [4.75])
19.7500
Minimum Width of Opening inrear face of Box Enclosure
G 0.410
Maximum Thickness ofBox Enclosure Back Cover
DETAIL G
MECHANISM DOWN - IN CABINET
WWW.FUTUREAUTOMATION.NET
LSM-S-BE 2
TECHNICAL SHEETISSUE 003
SHEET 5
LIFT SYSTEM SWIVEL FOR BOX ENCLOSURE
UK +44 (0) 1438 833577 US +1 (603) 742 9181
Box Enclosure Lid Width = Cabinet Aperture Width -2mm [0.1]
Lid Depth =Cabinet Aperture Depth
Depth -2mm [0.1]
0.820
Base Panel Width = Cabinet Aperture Width -6mm [0.25]
3.13.0
8076
2.051 Base Depth =
Cabinet Aperture Depth-6mm [0.25]
(Minimum 115mm [4.4])
0.820
BASE PANEL AND BOX ENCLOSURE LID DETAILS
NOTE: A tapered Box Enclosure Lid creates a good fitin the Cabinet Aperture and helps the Box Enclosure tolocate within the cabinet.
WWW.FUTUREAUTOMATION.NET
LSM-S-BE 2
TECHNICAL SHEETISSUE 003
SHEET 6
LIFT SYSTEM SWIVEL FOR BOX ENCLOSURE
UK +44 (0) 1438 833577 US +1 (603) 742 9181
6.9175
1.742
12 0.5 THRU
3.384
3.13.0
8076
2.462
0.4 max.R10 max.
Box Enclosure Base Width = Cabinet Aperture Width - 12mm [0.5]
1.742
5.5140
1.950
I
I
BOX ENCLOSURE BASE - BOTTOM VIEW VIEWING SIDE 0.820
Base Depth =Cabinet Aperture
Depth - 12mm [0.5](Minimum 109 [4.3])
SECTION I-I
BOX ENCLOSURE BASE DETAILS
WWW.FUTUREAUTOMATION.NET
LSM-S-BE 2
TECHNICAL SHEETISSUE 003
SHEET 7
LIFT SYSTEM SWIVEL FOR BOX ENCLOSURE
UK +44 (0) 1438 833577 US +1 (603) 742 9181
Box Enclosure Top
Box Enclosure Top Support
Box Enclosure Back Section
Box Enclosure Base
The LSM is fixed to the back of thecabinet with wood screws.
Box Enclosure Back Cover
MECHANISM INSTALLATION OVERVIEW
WWW.FUTUREAUTOMATION.NET
LSM-S-BE 2
TECHNICAL SHEETISSUE 003
SHEET 8
LIFT SYSTEM SWIVEL FOR BOX ENCLOSURE
UK +44 (0) 1438 833577 US +1 (603) 742 9181
7.9200
27.3694
22.3568
19.7501
MECHANISM - UP POSITION
27.2692BackPlate
Height
31.3795
6.5164
OVERALL MECHANISM DIMENSIONS
MECHANISM - DOWN POSITION
WWW.FUTUREAUTOMATION.NET
LSM-S-BE 2
TECHNICAL SHEETISSUE 003
SHEET 9
LIFT SYSTEM SWIVEL FOR BOX ENCLOSURE
UK +44 (0) 1438 833577 US +1 (603) 742 9181
