Lubricants & speciality products for the industrial sector

Lubricants for circulation and general lubrication

Omnis 32

Omnis 100

Omnis 150

A high viscosity, low pour-point performance lubricant, highly resistant to carbon formation or gumming. Contains no detergents or ash-forming additives and delivers very low crankcase deposit performance:

> For stationary diesel engines, gas and dual fuel engines and reciprocating air compressors

> Premium technology crankcase lubricants with extremely stable chemical properties

> Outstanding quenching performance.

Lubricants for turbines and circulation

Regal Premium EP 32 & 46

Regal Premium EP 68

Ultra high performance, high temperature gas and steam turbine lubricant for geared and non-geared systems:

> Highly resistant to oxidation; protects valves and bearings from sludge and acidic by-products of oxidation

> Long-term wear protection extends turbine life, improving operating economics

> Rapid water separation

> Fast air release and good foam suppression protects turbine bearings

> OEM approved by Siemens, Alsthom, General Electric, Fiat Avio, ABB Stal, Atlas Copco, MAN, Skoda.

Regal EP 100, 150, 320

A high technology gas and steam turbine lubricant for geared and non-geared systems:

> High viscosity index lubricant with good thermal and oxidation resistance

> High thermal stability extends lubricant service life

> Excellent wear, rust and corrosion resistance

> Rapid water separation for operating efficiency and equipment protection

> Meets specification standards and approvals including DIN, BS, ISO and Ansaldo steam turbine applications.

Regal SGT 22

A latest generation advanced technology stationary gas turbine lubricant, specially formulated to deliver maximum performance and protection to both industrial and marine turbines:

> Excellent thermal stability and oxidation resistance

> Low levels of carbon deposits and sludge formation

> Outstanding rust and corrosion protection even under high loads and temperatures

> Excellent foam suppression for improved valve operation and lubricant flow

> Approved under MIL-PRF-23699F Class STD specification, US Navy.

> OEM approvals include General Electric, Rolls Royce (Allison), Centrax, Rolls Royce (Derby).

Bulk 208 L208 L

208 L

208 L

20 L208 L

208 L

Bulk 208 L1,000 LIBC

Chevron Global Lubricants’ scientists and engineers

work closely with customers to develop Texaco lubricants and

specialist products that provide higher performance and superior

protection for all the equipment your company operates.

This brochure gives you an overview of Texaco products,

summarising their key characteristics, their benefits, major OEM

approvals and specifications.

Product sectors covered here include:

> Circulation & general lubrication

> Turbines and circulation > Hydraulics

> Gears > Pressure ways

> Pneumatic tools > Refrigeration compressors

> Compressors > White oils

> Thermal oils > Gas engines

> Dielectric oils

> De-moulding

> Greases

> Anti-freeze/Coolants

> Anti-corrosive

Key to pack sizes:

Bulk 250ml

1000L IBC 180kg

208L/210L barrel 50kg

20L 18kg/16kg

5L 400g cartridges (x24)/(x40)

1L/1L(x12)

180kg

50 kg

18 kg

g

Bulk

1,000 LIBC

208 L

20 L

5 L

1 L

4x5 L

Yet to be replaced with the HiRes version or

approved pic

Industrial lubricants

Industrial lubricants

speed / pressure vane and gear pumps, and axial piston pumps. Excellent compatibility with bronze and steel components and all types of valves and servos.

> Extremely stable anti-wear additive technologies, delivering the highest levels of system protection in highly stressed hydraulic systems.

> Optimum foam suppression performance in demanding high-speed operations.

> Highly stable when water is present, with maximum filterability and outstanding rust and corrosion protection

> Meets ASTM, DIN, ISO and SAE specifications.

Rando HDZ 15

Rando HDZ 32, 46, 68

This zinc-based, severe service hydraulic fluid is formulated with high performance and extremely shear stable viscosity index improver additive systems, for advanced multi-grade viscosity performance across a very wide range of temperatures, in arduous operating conditions:

> Recommended for use in all high-performance, heavy duty hydraulic systems operating under a wide range of environmental and operating temperatures, including high speed, high-pressure vane and gear pumps, and axial piston pumps.

> High viscosity index anti-wear protection and oxidation resistance across a superior operating temperature window temperature.

> Significant and highly reliable cross-grading and outstanding durability, extending system operating life.

> Exceptional protection to high-speed, high-pressure systems operating under severe conditions, preventing surface contact in all system components

> Rapidly separates out water contamination and protects filter operation in humid or very wet operating environments.

> Meets and exceeds AFNOR NF E 48-690 and NF E 48-691 dry and wet filtration tests.

> Meets ASTM, DIN, ISO and SAE specifications

> Approved by Bosch Rexroth, Cincinnati Machine and US Steel.

Rando HDZ LT 32

Delivers high performance protection and extended service life to high speed, high pressure hydraulic pumps operating in the most extreme conditions, across a wide range of climatic conditions including very low temperatures:

> Recommended for use in all high-performance, heavy duty hydraulic systems working under a wide range of environmental and operating temperatures, including high speed, high pressure vane and gear pumps, and axial piston pumps. Excellent compatibility with bronze, steel and silver-plated components.

> Excellent low pour-point performance, maximising fluidity and system protection across the extremes of temperature.

> Exceptional shear stability in severe high speed, high pressure operations.

> Highly reliable wear and oxidation protection provides a significantly extended service life to all types of hydraulic system.

> Optimised surface protection for all types of system, including high pressure, high speed vane and gear pumps

> Meets DIN and Swedish Standard specifications.

> Exceeds manufacturers’ specification requirements including Denison, Vickers, Cincinnati Milacron, US Steel.

Yet to be replaced with the HiRes version or

approved pic

Paper machine oil (PMO) 150

An all-new range offering top-tier lubrication protection and world-class equipment performance and component protection to paper machines operating under arduous conditions. Designed to maximise production performance through the reduction of planned maintenance periods and unscheduled downtime:

> For use in the circulating systems of paper machine dryer sections and calendar stacks; in crown controlled rolls; suction box pumps; vacuum and white water pumps; reduction gears and gear head motors.

> Powerful detergency and dispersancy additive systems keep bearing and gear surfaces deposit-free

> Outstanding water separation performance

> Exceptional ultra fine filterability properties

> Superior oil film properties and protection against wear, rust and corrosion.

Paper machine oil (PMO) XL 220

Delivers ultimate protection and performance to paper machines working under the most demanding operating conditions, and over very long service periods, optimising product quality and output performance and significantly extending component service life:

> Recommended for centralised lubrication systems including paper machines operating under severe conditions; paper machines equipped with fine filters; where super heated steam is present; or in those systems susceptible to water contamination.

> For use in gear drive units, pumps and self contained bearings in industrial applicators.

> Highest protection against wear for high performance paper machines in continuous operation, with reduced environmental impact

> Next generation anti-wear, extreme pressure and oxidation protection additive technologies for superior keep-clean performance

> Meets and exceeds the requirements of major bearing OEMs including FAG and SKF.

Hydraulic lubricants

Texaco Hydraulic Oil AW 32

Texaco Hydraulic Oil AW 46, 68

Texaco Hydraulic Oil AW is a universal, multi-purpose hydraulic fluid suitable for a wide range of light to medium duty applications:

> Use as a multi-service light to medium duty hydraulic fluid where no more than DIN 51524-2 (HGLP) is needed

> Oxidation resistance increases filter and oil life

> Detergent and dispersancy additives keep the system clean for greater uptime

> Superior wear resistance for longer service life

> Protects against corrosion and wear

> Approved against DIN and ISO specifications.

Rando HD 22, 32

Rando HD 46, 68

Rando HD 100

A range of highly robust and extremely reliable hydraulic fluids designed to deliver exceptional system performance and protection under severe thermal load, offering high resistance to oxidation over extended service periods:

> Recommended for use in all high-performance, heavy duty hydraulic systems, including high

208 L

208 L

Bulk 208 L1,000 LIBC

Bulk 208 L 20 L1,000 LIBC

Bulk 208 L 20 L1,000 LIBC

208 L 20 L

Bulk 208 L 20 L1,000 LIBC

208 L 20 L

208 L

208 L

Rando WM 32

An ultra high performance multigrade hydraulic fluid designed for use in wind turbine systems and a wide range of other applications where maximum protection and performance is required in very severe operating conditions:

> Excellent low temperature fluidity and a high VI, which provides a very wide operating temperature window.

> Recommended for use in wind turbines and in all types of high pressure hydraulic systems across a very wide ambient and operating temperature range.

> Suitable for systems with gear, vane, radial and axial piston pumps.

> Low pour point ensures optimum pumpability in low temperature start-ups

> Superior anti-wear performance and corrosion resistance increases uptime and reduces maintenance costs

> Complies with Swedish Standard SS 15 54 34.

> Meets ISO and DIN specifications.

> Approved by Vestas, Vickers and Swedish Standards.

Lubricants for gears

Meropa 68, 460

Meropa 100, 150

Meropa 220, 320

Meropa 460

These premium industrial EP gear lubricants provide

very high wear protection and exceptional load-carrying capacity as well as protection against shock loads and micro-pitting. Designed to protect a wide variety of heavy-duty gear systems and bearings:

> Recommended for the lubrication of a wide range of industrial, mobile and marine equipment, including all types of enclosed gear drives and speed reducers; chain drives, sprockets, low-speed plain and anti-friction bearings, slide guides, couplings, screws

> Good performance in industrial hypoid gears; recommended for use in transmission gear case and worm drive axles on automotive, construction and mining equipment

> Marine applications include main propulsion systems, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers and many other applications

> Protects against gear wear, micro-pitting and bearing wear, increasing system life

> Reliable thermal and oxidation stability extends oil life, improving uptime and productivity

> Reduced deposit and sludge formation ensure cleaner systems, reducing service downtime

> Effective corrosion prevention increases component reliability, cutting unscheduled maintenance time

> Rapid water separation optimises lubrication performance and rust prevention, reducing costs

> Suitable for bath, splash and circulation application

> The lighter viscosity grades are well suited to mist lubrication systems where equipment such as Norgren and Alemite is employed

> Provides mist lubrication of roller bearings, plain bearings, gears, slides and ways, chain drives and other applications where lubricants requiring good heat stability and anti-wear properties are needed

> Non-corrosive to gear and bearing materials such as steel, copper, bronze, babbitt or cadmium-nickel

> Meets the requirements of DIN 51517/3 (CLP), ISO 12925-1 (CKD), US Steel 224, AGMA 9005-E02, Textron Power Transmission, Cincinatti Milacron.

Meropa WM 320

High durability gear lubricants that offer best-in-class wear and corrosion protection to a range of enclosed gear drives and reducers operating under heavy shock loads:

> Recommended for the lubrication of heavily loaded enclosed gear drives and reducers driven by fractional horsepower motors, to the large high horsepower units in heavy duty industrial applications. Recommended for a variety of gears including spur, bevel, helical, worm and industrial hypoid gear cases on mobile contractor-type equipment, open pit and underground mining equipment, cement mills, ball mills, rolling mills, crushers, shakers, hoists, conveyors, kilns, winches, machine tools, skip lines and marine equipment.

> Highly effective micro-pitting protection to heavily loaded gear systems under high shock load conditions.

> Meropa WM 220 surpasses the load stage 10 in the FZG Micro Pitting test (FVA.54/I-IV) and is therefore classified as GFT-High.

> Low-foam performance, maximising oil film protection and performance over long service periods.

> Leading edge water separation characteristics.

> Protects against rust and corrosion formation, system impairment and damage.

> Non-corrosive to gear and bearing materials such as steel, copper, bronze, babbitt and cadmium-nickel.

> Resists thickening, degradation and deposit formation, maximising keep-clean performance and lubricant service life.

> Meets the following recommendations and approvals US Steel 224, AGMA 9005-E02, David Brown ET 33/80, DIN 51517/3, Cincinnati Milacron (for appropriate viscosity grades), Flender, Valmet.

Pinnacle EP 220, 320

Pinnacle EP 460

A range of synthetic lubricants that deliver world-class wear and corrosion protection in very demanding operating environments where water contamination and elevated temperatures will compromise the performance of conventional oils:

> Recommended for use in mobile and industrial enclosed gear systems and other equipment operating in adverse conditions, including speed reducers; plain and anti friction bearings; flexible couplings; chain drives; sprockets; spur, bevel and herringbone gear designs lubricated by bath, slash, spray or circulatory lubrication systems.

> Superior quality polyalphaolefin and polyol ester base stocks and powerful additive technologies are designed to deliver advanced wear protection through maximum extreme pressure performance.

> Exceptional wear protection, extended equipment service life and operating performance in very demanding operations where water contamination is a hazard, and

208 L1,000 LIBC

Bulk 208 L 20 L

208 L 20 L

Bulk 208 L 20 L1,000 LIBC

Bulk

Bulk 208 L 20 L1,000 LIBC

208 L 20 L

20 L

Industrial lubricants

where elevated operating temperatures can place exceptional demands on equipment.

> Extremely low viscous drag coefficient performance delivers lower energy consumption and optimum wear protection over a very long service period.

> Approved by Staubli for textile machines requiring lubricants meeting Pinnacle EP 220 specifications.

> Pinnacle EP lubricants meet the performance requirements of US Steel, AGMA, David Brown scheme, DIN.

Pinnacle WM 320

A line of ultra high performance synthetic gear lubricants specifically designed for wind turbine gear systems that are subject to adverse high load, shock load and extremely hostile environments:

> Specifically designed for wind turbine gear systems for both on and offshore installations.

> Improves wind turbine reliability

> Protects wind turbine gears against wear and corrosion, reducing maintenance costs

> Controls micropitting and wear, extending equipment service life

> Wide operating temperature range

> Rapid water separation and low foaming optimises oil film strength and improves lubrication

> Pinnacle WM meets the following specifications DIN 51517/3, US Steel 224, AGMA 9005-E02, David Brown ET 33/80, Cincinnati Milacron, Valmet

> Approved by Bosch Rexroth for use in planetary gearboxes for wind turbines

> Moventas for use in wind turbine gearboxes.

> Pinnacle WM 220 is approved by ARBURG, for plastics injection moulding machines and the relevant additional equipment.

Lubricants for pressure ways

Way Lubricant X 68, 320

Way Lubricant X 220

These offer exceptional wetting, adhesion and lubricity performance, delivering maximum lubrication to flat surfaces under heavy sliding loads, minimising metal processing machine and slideway wear, and stick-slip problems:

> Recommended for the lubrication of slide rails and guidings of machines and tools, used for precision work.

> Way Lubricant X 68 is suitable for most metal working machines with horizontal slideways and for light applications. Approved against Cincinnati Milacron P-47.

> Way Lubricant X 100, X 220 and X 320 are applied in more severe applications and for machines with vertical slideways.

> Delivers outstanding extreme pressure and wear protection to metal processing equipment.

> Completely chlorine-free formulations, offer high-level protection against rust and corrosion damage to slideways and critical metal processing equipment components.

> Exceptional lubricity between metal and plastic surfaces, will not wash off surfaces if in the presence of emulsifiable cutting fluids.

> High-level adhesion and wetting performance ensures that this highly durable lubricant remains in place even on vertical surfaces.

> Way Lubricant X series can be used in applications requiring the following performance levels: Afnor E 60-200, US Steel 224, DIN 51524 part II, Cincinnati Milacron P-47, P-50.

> Way Lubricant X 220 is approved against Cincinnati Milacron P-50.

Lubricants for pneumatic tools

Aries 100

Aries delivers excellent equipment performance to percussion-type air tools, offering maximum wear protection and mechanical reliability over very long service periods, in demanding operating environments:

> Recommended for use in all percussion-type air tools, including rock drills, paving breakers, pneumatic pile drivers and jackhammers used in the mining and construction industries; and all types of industrial plain and anti-friction bearings.

> Excellent wear protection and outstanding corrosion and rust resistance.

> Highly adhesive, maximising oil film reliability.

> Resists water wash-out in very wet environments.

> Absorbs moisture in tool airflow in very humid operating environments.

> Prevents fogging, foaming or deposit formation, which may lead to loss of drilling performance due to slow or erratic valve operation.

> Maintains highly durable oil film integrity at high temperatures

> Prevents ice-related downtime in low temperature situations caused by air expansion.

Lubricants for refrigeration compressors

Capella WF 32, 68

Compressor lubricants that deliver outstanding super-low freon floc temperature and pour-point performance to both refrigeration systems and air conditioning units, optimising stable lubrication protection and system performance:

> Recommended for use in refrigeration compressors and air conditioner systems using fluorinated hydrocarbon refrigerants, or ammonia; and in compressor systems running on fluorinated hydrocarbon refrigerants where minimum evaporator temperatures of –45°C (R12), -35°C (R22) and –25°C. (R502) are present.

> Meets and exceeds major compressor manufacturers’ performance requirements, delivering a very low freon floc temperature of –45°C.

> Optimised system efficiency and service life through very robust and highly reliable chemical and thermal stability.

> Highly resistant to waxing at very low temperatures.

> Chemically stable performance in the presence of ammonia and fluorinated hydrocarbons such as R-12 and R-22.

> Meets the following recommendations and approvals DIN 51.503 standard, BS 2626:1992, Type A Lubricants, NATO standard VV-L-825.

> Approved for several grades by Sulzer, Bitzer, Tecumsec, Carrier York, Sabroe, J & E Hall, Belgium Daikin, Robert Bosch (G), Heinrich Huppman (G), Dorin (I), Matsushita (J), Trane, DWM Copeland (US), Kelvinator Inc (US), Carrier.

1,000 LIBC

208 L 20 L

20 L

208 L

208 L 20 L

Industrial lubricants

Cetus DE 100

Cetus DE 100 is specially formulated to lubricate and protect reciprocating compressors operating at high discharge temperatures and discharge pressures, optimising system operating efficiency, energy consumption and maintenance costs:

> Recommended for use in all types of air compressors including reciprocating and rotary screw units; fans; blowers; hydraulic systems; centrifugal and other pump types.

> Leading edge high temperature performance, providing highly stable oxidation resistance and preventing deposit formation, optimising long-term operational performance and energy efficiency through maximum fluidity and lubricity.

> World-class corrosion protection, neutralising the effects of oxidation deposits or corrosive components within the compressor system.

> Approved by major compressor manufacturers including Sperre, Tanabe (H-type) and Matsubara.

White oils

White Oils Pharmaceutical 40

White Oils Pharmaceutical 70

White Oils Pharmaceutical 240W

Very high purity, colourless, clear and odourless oily fluids, designed to deliver highly consistent performance in a wide variety of pharmaceutical, food-grade and industrial applications:

> Pharmaceuticals and cosmetics: recommended for use as base materials for ointments, skin creams, hair preparations, suntan lotions and emollients, ingredients for baby and bath oils, lotions, lipsticks, massage oils, etc.

> Food: recommended for use in divider oils and bakery pan oils, coatings for eggs and fresh fruit and vegetables, impregnating oils for fruit and vegetable wrappings, plasticisers in polystyrene and other plastic packaging materials.

> Chemicals: recommended for use in the manufacture of plasticisers and internal lubricants, mould release agents and extrusion aids in plastics production, manufacture of carrier oils for pesticides and insecticides.

> Lubricants: recommended for use in lubricants for medical instruments and apparatus, filling and packaging machines in food industry and the cylinders of compressors in the beverages industry. White Oils Pharmaceutical are also recommended as rayon oils and defoaming and glossing agents.

> Industry: recommended for use in drugs and pharmaceuticals, cosmetics, food processing and handling, rubber, plastics, paper, ropes, bakery, textiles, agriculture, precision machinery.

> Exceptional colour and oxidation stability.

> Chemically and biologically stable oils that do not support bacterial growth.

> Comply with purity standards set by the European, British and United States pharmacopoeias, and meet and exceed United States FDA 21 CFR 178.3620 a and FDA 21 CFR 172.878 “White Mineral Oils”.

208 L 20 L

20 L

208 L 20 L

208 L 20 L

20 L

Bulk 208 L1,000 LIBC

Bulk 208 L

208 L

208 L

Industrial lubricantsYet to be

replaced with the HiRes version or

approved pic

Capella Premium 68

A semi synthetic compressor lubricant, formulated for use in ammonia refrigeration compressor systems:

> Recommended for the lubrication of ammonia refrigeration compressors but NOT for refrigeration systems using halogenated refrigerants (freons)

> Oxidation resistant in the presence of ammonia; keeps systems clean and reduces maintenance

> Low volatility, reduces fluid consumption and lubricant replacement costs

> Reduced fluid carry-over improves efficiency and uptime

> Low pour point eliminates evaporator blockages, saving time and money

> Meets DIN 51503 Part 1 KA group specifications.

Lubricants for compressors

Compressor Oil EP VDL 46, 100

Compressor Oil EP VDL 150

These lubricants deliver outstanding equipment performance and protection in high temperature, extreme pressure conditions:

> Recommended for use in single and multistage reciprocating compressors, single and multistage centrifugal compressors, and oil flooded screw compressors operating at high pressures of up to 1000 bar and high temperatures.

> Delivers extremely durable and highly stable oxidation resistance, corrosion protection

> Prevents deposit formation on pistons and valves.

> Provides maximum protection against fire or explosion

> Meets DIN 51 506 VDL specification.

> Approved by major compressor manufacturers, including Teikoku Machinery Air compressors, Tanabe Reciprocating type compressors, Sperre Reciprocating type compressors, Hatlapa V-Line piston compressors, Hamworthy vertical compressors.

Cetus PAO 46

Cetus PAO 68

Cetus PAO lubricants deliver powerful long service protection to compressor systems and marine diesel turbochargers operating over long periods and at high temperatures, providing all the economic benefits of reduced maintenance periods:

> For use in oil injected rotary screw compressors with high discharge temperatures of up to 100 °C and pressures of up to 15 bar and in marine diesel turbochargers where two separate lubrication systems are in use.

> Formulated with advanced polyalphaolefin synthetic technologies and latest generation additive systems

> Provides exceptional system performance and complete protection.

> Delivers superior operational performance and protection in all types of compressor

> Excellent turbocharger protection and long service performance in diesel marine turbocharger applications

> High performance thermal stability of Cetus PAO 46 protects oil-injected rotary screw compressors with high discharge temperatures of +100°C at 15 bar, extending drain intervals to 8000 hours.

> Excellent air release characteristics, optimising wear protection in oil-flooded screw compressors, and promote seal swell, reducing leaks and optimising long term operational performance.

> Meets DIN 51506 VDL standard.

> Approved by Atlas Copco, Tanabe and ABB.

Thermal oils

Texatherm HT 22

A high performance synthetic heat transfer fluid formulated to operate over a wide temperature range, from –45°C up to +290°C, where it gives excellent oxidation stability and deposit-free operation:

> Its low pour point provides energy-efficient start-up and good pumpability in sub-zero ambient temperatures, where pipes or expansion tanks may be sited outdoors.

> Recommended for indirect heat transfer in closed systems operating in a wide range of applications, such as chemical, leather, textile, rubber, chipboard, food, building materials and fodder processing operations. It is also suitable for use in laundries.

> Within its wide operating temperature range, Texatherm HT 22 can also be used in cooling applications for the removal of process heat.

> Meets DIN 51522 and ISO 6743 L-QB specifications.

Lubricants for gas engines

Geotex LA 40

High-level wear protection and optimum engine cleanliness to high output natural gas engines in stationery applications, maximising engine life:

> Recommended for naturally aspirated and turbocharged gas engines in stationary applications, running on sweet or dry natural gas.

> Recommended for natural gas engines with catalytic exhaust systems.

> Contains low levels of zinc and phosphorus elements, making it suitable for use in engines equipped with catalytic exhaust systems.

> Meets the performance requirements of API CD and Dresser-rand Category III

> Approved and listed by Deutz Power Systems, GE Jenbacher, MAN B&W, MDE Dezentrale Energiesysteme, MTU, Perkins Natural Gas, Rolls Royce Bergen, Wärtsilä

> Meets the requirements of Caterpillar and has been successfully field tested in Caterpillar 3500 series natural gas engines for over 6000 hours.

> Meets the requirements of the following manufacturers for gas engines fuelled by natural gas: Waukesha and Mirrlees

Geotex HD 40

Delivers maximum protection against wear, scuffing, oxidation and deposit formation in high-output gas engines running on every type of gas:

> Recommended for naturally aspirated and turbocharged gas engines in stationary applications, running on biogas or landfill gas.

> Recommended for dual-fuel engines where pilot injection is used, or spark-ignited engines running on natural gas, particularly engines with low oil consumption characteristics.

> For gas engines with catalytic exhaust systems, the catalyst manufacturer’s recommendations on zinc, phosphorus and sulphated ash level limits should be consulted.

> A relatively high alkalinity reserve measured by Total Base Number neutralises acidic combustion products such as H2S, chorine and fluorine.

> Meets and exceeds the following approval: API CD CD

> Geotex HD also meets the performance requirements of Mirrlees, MAN and Waukesha.

> Approved and listed by Dorman Diesels (Natural gas), Fincantieri Diesels, Jenbacher, MWM-Deutz, Perkins Engines, Ruston Diesels.

Geotex PX 40

A low ash formulation delivers exceptional oxidation and nitration protection and robust and highly reliable wear and corrosion protection, improving engine performance and extending service life:

> Recommended for use in naturally aspirated and turbocharged natural gas engines in stationary applications where long oil drain intervals are required.

> Suitable for gas engines equipped with catalytic exhaust systems.

> A high performance, highly robust, low ash, low Total Base Number gas engine lubricant.

> Delivers long-service protection to naturally aspirated and turbocharged gas engines running on natural gas, or other non-corrosive gases in stationary applications.

> Exceptional oxidation/nitration performance and long oil drain intervals.

> Meets the lubricant specifications of most gas engine manufacturers for engines running on natural gas or other non-aggressive gases, including: Caterpillar, Dorman Diesels, GE Jenbacher, MAN, Mirrlees, Perkins Engines, Pielstick, Ruston Diesels, Wärtsilä NSD and Waukesha.

> Approved by Deutz Power Systems and Rolls Royce Bergen for applications using natural gas or other non-aggressive gases.

Chevron HDAX Low Ash Gas Engine Oil SAE 40

Outstanding oxidation and nitration resistance, which reduce the buildup of insolubles and provide extended oil and filter life:

> Recommended for four-stroke and selected two-stroke stationary engines fuelled by natural or synthetic gas and gas from digester and landfill sources.

> Recommended for four-stroke engines manufactured by Caterpillar, Delaval Enterprise, Dresser-Rand Categories I, II, and III (SAE 30), Superior, Waukesha, Worthington

> Satisfactory for selected two-stroke engines manufactured by Ajax, Clark-Dresser, Fairbanks-Morse/MEP, Worthington

> Low wear: excellent protection against piston, ring, and liner scuffing, scoring, and wear.

> Reduced valve recession: minimum valve recession with low levels of combustion chamber deposits to minimise the potential for pre-ignition and spark plug fouling.

> Minimum oil viscosity increase: oxidation inhibited and nitration resistant to insure minimum viscosity increase, long service life and low wear rates.

> The SAE 30 and 40 grades are formulated to meet the performance requirements of API Service Category CD1/CF.

> The SAE 15W-40 grade meets the performance requirements of Cummins L10, M11, and Detroit Diesel Series 50G engines running on compressed natural gas.

Bulk 208 L1,000 LIBC

Bulk 208 L1,000 LIBC

Bulk 1,000 LIBC

208 L

Bulk 208 L1,000 LIBC

Industrial lubricants

Dielectric oils

Transformer Oil Uninhibited

A high performance mineral-based non-inhibited transformer oil designed to provide high dielectric strength, superior oxidation and ageing resistance and good low temperature properties:

> Transformer Oil Uninhibited is recommended as an insulating oil in transformers, switchgear, inductors, condensers, transducers and similar equipment. This product is suitable for low temperature outdoor use

> Transformer Oil Uninhibited insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials

> High dielectric strength and long service life

> Good anti-oxidation performance and good low temperature properties

> Neutral behaviour toward all types of insulating materials

> Meets the specifications of IEC, BS, LABORELEC

> This oil tested non-corrosive with CIGRE A2.32 (preferred method)

De-moulding oils

Texaform CRS 15

A chemically reactive de-moulding oil formulated for use in the indirect de-moulding of concrete elements:

> It can be used to preserve wooden moulds, protecting them from dehydration when the product is emulsified with water.

> Efficient release properties increase production output

> Provides good surface finish and product quality

> Protects wooden moulds from dehydration, reducing maintenance and costs.

Greases

Multifak EP 0

Multifak EP 2

Multifak EP delivers outstanding wear, corrosion and extreme pressure protection in a range of demanding heavy-duty operations where high shock loads and adverse working conditions prevail, including steel mills and other metalworking applications:

> Recommended for the lubrication of plain brass and babbit roll neck bearings; mill screws and nuts; shears; presses; and shearing lines in steel mills and other metalworking applications. Also suitable for use in large rolling element bearings in mining; construction and marine equipment operating in adverse conditions.

> Complete protection in demanding heavy-duty operations where heavy, continuous shock loads are present.

> Shear stable, exhibiting excellent mechanical stability.

> Offers durable and reliable load carrying capabilities, and resists water wash-out.

> Non-corrosive to non-ferrous bearing metals, as well as steel, and protects against the formation of rust.

> Approved against MB-Approval 267, MAN 283.

Multifak 264 EP 00/000

This superior quality grease provides optimum heavy-duty stability and is highly resistant to water and moisture:

> Recommended for the lubrication of wheel bearings in rail vehicles; heavy duty road vehicles; roller bearings in crushers, mills and mixers

> For use in steel plants, particularly in hot and cold rolling mills

> For use in centralised lubrication systems where grease is supplied to highly loaded lubrication points.

> Approved by Firma Willy Vogel, Tecalemit, Lincolm, MB-Approval, MAN

> Formulated with a range of highly effective additive systems delivering excellent rust protection, anti-wear performance and oxidation resistance.

> Exceptional oxidation stability and extreme pressure performance in low speed, high temperature bearing environments.

> Resistant to shock loads and offers high-level wear protection in high-speed operations.

Molytex EP 2

A high performance multipurpose lithium complex grease with solid lubricants formulated to give high load carrying protection:

> Performs well in high load conditions over a wide temperature range and provides excellent resistance to rust and water wash-out

> Specially developed for use in constant-velocity joints and suitable for all construction, mining and agricultural applications, and virtually all grease lubrication points found on dozers, scrapers, earthmovers, cranes, shovels, rollers, tractors, combines and cotton pickers. These include all types of anti-friction bearing

arrangements from pain sleeve-type to rolling element bearings, as well as bushings and other sliding surface or pivot points

> Heavy-duty shock load wear protection extends equipment service life

> Can significantly increase the life of universal joints (up to 30% is achievable)

> Excellent water wash-out resistance ensures component protection and prevents rust and corrosion

> Performance meets ASTM D4950 Service Classification LB and Association of American Railroads Specification M-929-75.

Starplex EP2

Lithium complex grease for wheel bearings:

> Wide operating temperature range

> Good thermal stability

> Does not drip onto brake discs or pads.

High Temp Premium 2

An ultra high performance polyalphaolefin-based grease. It is combined with an advanced polyurea thickener, designed to provide low volatility performance and oxidation resistance over an extended service life, at temperatures of up to +200°C and intermittently up to +230°C:

> Outstanding pumpability in centralised systems, resisting the formation of hard deposits when exposed to radiated heat at temperatures of up to +280°C.

> Highly resistant to softening at elevated temperatures.

> Recommended for a wide range of industrial applications where continuous temperatures of up to +200°C are present, or where intermittent temperatures of up to +230°C are possible.

Bulk 208 L 20 L1,000 LIBC

8 kg180kg

8 kg

24x

400g

180kg

8 kg

8 kg

24x

400g

180kg

16 kg

40x

400g

8 kg

208 L

Speciality fluids and greasesYet to be

replaced with the HiRes version or

approved pic

> Recommended for use in high temperature applications where bearings are subjected to extreme temperatures, such as in annealing and drying furnaces, rotary kilns, cooling beds, conveyor systems, hot air fans, electric motors, exhaust gas fans for aggressive media, stop valves in bulk material equipment, ejector pins in plastic-cast tools, gate valves in bulk material container systems.

> High temperature stability maximises grease service life, reducing maintenance downtime

> Highly resistant to thermal oxidation, protects against wear and corrosion, increasing uptime

> Will not soften at elevated temperatures, sealing against water and other contamination.

Antifreeze/coolants

Havoline ELC Concentrate

Havoline ELC Pre-mixed 50/50

Havoline ELC Pre-mixed 35/65

Protects against winter freezing and summer boil-over:

> 650,000 km or 8,000 hours without the need for supplementary coolant additives in heavy duty diesel applications

> Contains no silicate and is therefore free of any abrasive or sticky gel

> Offers long term protection from corrosion

> Compatible with a wide range of engine components and metals

Anticorrosive

Havoline XLI

Havoline XLI delivers high performance, maintenance-free environmentally friendly protection to all types of metal component against all types of corrosion over very long service periods:

> For engines manufactured from cast iron, aluminium or combinations of the two metals, and in cooling systems made of aluminium or copper alloys.

> Patented organic and aliphatic acid technology delivers long-life, maintenance-free protection against corrosion.

> Protects metal engine components, including iron, aluminium, copper and solder alloys and aluminium heat transfer surfaces.

> Maintenance-free corrosion protection for at least 32,000 hours in marine and stationary applications compatible with glycol-based coolants.

> High-stability, virtually depletion-free corrosion inhibitors offeingr maximum protection of all system components, including thermostats, radiators and water pumps.

> Superior nitrate-free design is a silicate and phosphorus-free formulation and offers excellent stability in hard water solutions.

> Approved by Deutz, Deutz/MWM, GEC Alsthom, Liebherr, MTU, Scania

Texaco Solutions

Texcheck: oil analysis

Texaco offers to its clients the most useful and trustworthy tool to control the state of the oil in its motor: Texcheck. With Texchek we sample lubricants taken from your equipment, where sophisticated oil analysis will detect how the equipment is performing and will ensure the correct lubricant is being used by:

> Locating any contamination, in terms of fuel, water, coolant or dirt

> Detecting degradation of the lubricant by oxidation, additive depletion and viscosity change

> Identifying any possible wear problems

> Highlighting any filter requirements, if applicable.

This program provides fast and detailed results and the recommendations and advice customers need to improve machine, and ultimately business performance.

Bulk 208 L 20 L1,000 LIBC

Bulk 208 L 20 L1,000 LIBC

Bulk 208 L1,000 LIBC

Bulk 208 L1,000 LIBC

Speciality fluids

IND/SP/TEX/PRDOVWBRCv1_09/2008

© 2008 Chevron Products Company. San Ramon, CA. All rights reserved.

www.chevronlubricants.com

For more information, contact your local Texaco distributor:

Authorised lubricant distributor