Date post: | 21-Apr-2015 |
Category: |
Documents |
Upload: | rayan-ruff-rydar |
View: | 42 times |
Download: | 2 times |
1
NISHISHIBA
Frequency Converter System (MFrequency Converter System (M--G Set)G Set)
NISHISHIBANISHISHIBA ELECTRICELECTRIC CO.,LTD.CO.,LTD.
2
NISHISHIBA Target products
SM SG
Powersupply
Load
This is the M-G set.It converts frequency or voltageaccording to its use.
Motor and Generator
MotorGenerator
What is the M-G set?A device that converts electrical energy to rotary energy by using its motorand converts rotary energy to electrical energy by using its generator
Various combinations of motor with generator enable supply of specialpower supply (frequency conversion and voltage conversion) and stablepower supply.
3
NISHISHIBA Uses
1 As a 50/60 Hz convertible power supply
2 As a variable frequency power supply
3 As a variable voltage power supply
Uses of the M-G set
When a 60 Hz (50 Hz) power supply is necessary in a50 Hz (60 Hz) region
When you need a power supply that changes frequencyaccording to the use
When you need a power supply that changes voltageaccording to the use
Combining the motor with an inverter enables adjustmentto a wide range of frequencies.
A special design enables adjustment to a wide range ofvoltages.
Factory power supplyIf the commercial power supply isdifferent from the power supplyfrequency of the factory equipmentExample: When 60 Hz (50 Hz)equipment is brought into a 50 Hz (60Hz) region
Test power supplyUsed as a test power supply forinduction motors, fans,transformers, pumps, controllers,home electronics (such as washingmachines and air-conditioners),and other equipmentExample: When frequency or voltageneeds adjustment in a product test
4
NISHISHIBA Uses (assumed uses) [Test power supply, part 1]
①As a test power supply for motors and other equipment
M-G set
Commercialpower supply
Example: 60 Hz
Used as a power supply for testingmotors and other equipmenthaving a different frequency
Motor to be tested50Hz
Used as a power supply for testingmotors and other equipmenthaving a different voltage
M-G set
Commercialpower supply
Example: 6600V
Motor to be tested200V
Motor to be tested440V
60 Hzregion
Applied also as a test power supply forcontrollers and other equipment
5
NISHISHIBA Uses (assumed uses) [Test power supply, part 2]
②As a special frequency power supply
Used as a test power supply for transformers
Commercialpower supply
50/60Hz
Example: Tested at aspecial frequency
Factory
M-G set
Test transformer
(Applied as a variable frequency power supply, etc.)
6
NISHISHIBA Uses (assumed uses) [Test power supply, part 3]
Motor to be tested
200V
M-G set
Generator usedas a test power
supply
M-G set used as analternative power
supply
Diesel generator
③Alternative use of a diesel generator
Commercialpower supply
7
NISHISHIBA Uses (examples of equipment specification and configuration) (SM-SG), part 1
Reactorpanel
Motorpanel
Generatorpanel
Commercial power supply3φ-3W 6600V 50Hz
M-G set
To load
・Measurement・Protection・Control
Commercial power supply3φ-3W 3300V 50Hz
APFR
SM SG
Synchronous motor
Synchronous generator
・AVR・Measurement・Protection・Control
AVR
VCB52G
52MVCB
To load3φ3W □V □Hz
Reactorpanel
Motorpanel
Generatorpanel
M-G set
8
NISHISHIBA
・Measurement・Protection・Control
Commercial power supply3φ-3W 3300V 50Hz
APFR
SM SG
Synchronous motor
Synchronous generator
・AVR・Measurement・Protection・Control
AVR
VCB52G
52MVCB
To load3φ3W □V □Hz
Uses (examples of equipment specification and configuration) (SM-SG), part 2
Motor panel, reactor panelThey incorporate a starting circuit,protective circuit, and measurement circuitfor motors.They also incorporate an automatic powerfactor regulator (APFR) as well.
M-G set (synchronous motor - synchronousgenerator)The synchronous motor can adjust the fieldcurrent, thereby controlling the operatingpower factor.The M-G set uses a synchronous motor (10-pole) and a synchronous generator (12-pole),so that the output frequency of the generatorcan be kept at 60 Hz unless the frequency ofthe input power supply of the motor changes.
Generator panelThe automatic voltage regulator (AVR) isused to control the output voltage of thegenerator at a constant level.
Reactorpanel
Generatorpanel
M-G set
Motorpanel
9
NISHISHIBA Uses (examples of equipment specification and configuration) (IM-SG), part 1
・Measurement・Protection・Control
Commercial power supply3φ-3W 6600V 50Hz
Inverter
IM SG
Induction motor
Synchronous generator
・AVR
・Measurement
・Protection
・Control
AVR
VCB52G
52MVCB
To load
Inverterpanel
Motorpanel
Generatorpanel
To load
Inverterpanel
Motorpanel
Generatorpanel
Commercial power supply3φ-3W 6600V 50Hz
M-G set
M-G set
3φ3W □V □Hz
10
NISHISHIBA Uses (examples of equipment specification and configuration) (IM-SG), part 2
・Measurement・Protection・Control
Commercial power supply3φ-3W 6600V 50Hz
Inverter
IM SG
Induction motor
Synchronous generator
・AVR
・Measurement
・Protection
・Control
AVR
VCB52G
52MVCB
To load
Inverterpanel
Motorpanel
Generatorpanel
M-G set
3φ3W □V □Hz
Motor panelIt incorporates a starting circuit, protectivecircuit, and measurement circuit for motors.
M-G set (induction motor - synchronousmotor)It uses an induction motor and a synchronousgenerator.It can convert the frequency of the inputpower supply of the motor by using aninverter, thereby changing the outputfrequency of the generator.
Generator panelIt uses an automatic voltage regulator (AVR)to control the output voltage of the generatorat a constant level at all times.
Inverter panelIt converts the commercial power supplyinput by using an inverter and changes themotor speed.
11
NISHISHIBA Product characteristics and selling points, part 1
- The company has numerous good results and high durability andreliability as a manufacturer specializing in rotors.
- The set has a neat waveform, so that it allows precise measurementand produces hardly any noise.
- It has a wide setting range in frequency and voltage and is adaptableto specific specifications.
Characteristics of Nishishiba’s M-G set
M-G set Control panel
12
NISHISHIBA
- Many results as a manufacturer specializing in rotors!Experience of delivering about 20 sets and know-howaccumulated over 40 years
Coping with a wide range of systemsCapacity : up to 10,000 kVAOutput voltage : up to 13,800 VOutput frequency : up to 400 Hz
Product characteristics and selling points, part 2
Characteristics of Nishishiba’s M-G set
13
NISHISHIBA Product characteristics and selling points, part 3
Voltage waveform of generatorsThe output voltage waveform of the synchronous generator is a neat sine waveand does not include harmonics.
- Properties: Waveform distortion, 5% or less
- Example of measurement of a no-load voltage waveform
Overload resistance and short-circuit current
The generator is of the rotary type, so that it has high overload resistance and cansupply power to loads that need large starting currents such as those from motors.
- Overload resistance : 110% - 60 minutes- Over-current resistance : 150% - 15 seconds
14
NISHISHIBA Product characteristics and selling points, part 4
Other properties (characteristics)
The output side uses no inverter or other harmonics-generating equipment, so that the load side is completelyprotected from the effects of harmonics.
Harmonics
Even if an instantaneous voltage drop occurs in the commercialpower supply system, the flywheel effect of the rotor keeps theload side unaffected.A flywheel can be added to extend the warranty period ofinstantaneous voltage drops.
Instantaneousvoltage drop
It can be used under general conditions with an ambienttemperature of -5 to 40°C and a humidity of 85% or less.Therefore, although air supply and ventilation equipment inconsideration of temperature rises is necessary, no air-conditioning equipment is necessary.
Installationconditions
Properties and characteristicsItem
15
NISHISHIBA
If there is a great change in the load capacity of the customer, several units can be installedand the number of units used can be switched over to ensure an efficient operation.
・Measurement・Protection・Control
Commercial power supply3φ-3W 6600V 50Hz
APFR
SM1 SG1
Synchronous motor
Synchronous generator
VCB52G1
52M1VCB
・Measurement・Protection・Control
Commercial power supply3φ-3W 6600V 50Hz
APFR
SM2 SG2
Synchronous motor
Synchronous generator
・AVR・Measurement・Protection・Control
AVR
VCB52G2
52M2VCB
M
Rollingequipment
Synchronousequipment
VCB52F1
VCB52F2
To load To load
Example of connecting a single unit when two units are operating in parallel
To run two or more generatorssynchronously, the voltage,frequency, and phase must bematched and the units must beelectrically linked together. Butthe input is a commercial powersupply, so that a device (rollingequipment) must be installed torotate the generator stator inorder to adjust the phasedifference.
Parallel operation of the M-G set
・AVR・Measurement・Protection・Control
AVR
Product characteristics and selling points, part 5
16
NISHISHIBA
END