MODEL #:

q D1581 (NIJ Compliance Product List)

TESTING CERTIFICATION/STANDARD:

q NIJ 0101.061 q Special Threat Tested*

SPECIAL THREATS:

q 5.56mm x 45mm 62gr Ball (M855)

q 5.56mm x 45mm 62gr Ball (M855A1)

q 7.62mm x 39mm 121gr Armor Piercing Incendiary (API)(BZ)

q 7.62mm x 51mm 147gr FMJ (M80)

q 7.62mm x 51mm 150gr Armor Piercing (AP)(M61)

q 7.62mm x 54Rmm 155gr Armor Piercing Incendiary (API)(B32)

q 7.62mm x 63mm 166gr Armor Piercing (AP)(M2AP)

PROTECTION TYPE/THREAT LEVEL:

q NIJ III Plus and NIJ IV Plus

CONFIGURATION:

q Stand-Alone q ICW (In Conjunction With)

CONSTRUCTION:

PROTECTIVE COVERS AVAILABLE:

q Polyurea q Cordura w/ Welded Seams

HIT RATING:

q Single q Multi

3

3

3

3

q Polyethylene q Alloy/Polyethylene

M12 SERIESThe DKX M12 Series ballistic plates are NIJ 0101.06 certified to both level III and level IV plus. This dual certification guarantees the ability to defeat multiple rounds of both the M80 ball and M2AP, while still being capable of stopping the M855, M855A1, 7.62x39 API BZ and 7.62x54R API B32. Robustly tested and multi-hit rated, this series represents the workhorse of the group.

SERIES SPECIFICATIONS

3 3

33

33

333

3

DKX ADVANCED MANUFACTURING, INC.Phone: 1-800-606-8317 | Fax: 1-352-672-6922

www.dkxarmor.comLIT: DKX-M12-021516

*Special Threat Testing conducted in accordance with an abbreviated and modified NIJ Standard 0101.06 / NIJ 0115.00.

q Ceramic/Polyethylene q Ceramic/Composite 3

1: If l isted as NIJ cert if ied, only sizes greater than the 7”x8” side plate may be considered compliant to the NIJ Standard-0101.06. Al l s ide plates equal to or less than 7”x8” are Independently Tested to the above standards.

M12 SERIES

DKX ADVANCED MANUFACTURING, INC.Phone: 1-800-606-8317 | Fax: 1-352-672-6922

www.dkxarmor.comMADE WITH PRIDEIN THE USA

Department of State ITAR / Department of Commerce EAR:This data sheet is for an EXPORT CONTROLLED PRODUCT. The export of these products and technical information related to these products is governed by the U.S. Department of State International Traff ic in Arms Regulations (ITAR) and/or the Department of Commerce Export Administration Regulations (EAR). Non-Sales Technical Data related to these products must not be transmitted to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civi l , or cr iminal penalt ies. ITAR/EAR Export Licenses and/or ITAR/EAR Brokering Licenses (as appropriate) wil l be required prior to submittal of any further technical information and/or shipment of samples and/or products.

LIT: DKX-M12-021516

1. Al l s ize dimensions are ± 0.375”2. Al l thickness dimensions are ± 0.125”3. Al l weights are ± 4% or 0.50 lbs., whichever is greater

SHAPE SIZE1 (IN) THICKNESS2 (IN) WEIGHT3 (LBS) CURVATURE PRODUCT CODE

Full Size 6 x 6 1.30 2.40 Single DKX-M12-66-FSFull Size 6 x 8 1.30 3.20 Single DKX-M12-68-FSFull Size 7 x 8 1.30 3.70 Single DKX-M12-78-FS

Full Size 8 x 10 1.30 5.30 Multi DKX-M12-810-FS

Full Size 10 x 12 1.30 8.40 Multi DKX-M12-1012-FSSAPI/ESAPI 7.25 x 11.50 1.30 5.20 Multi DKX-M12-XS-SESAPI/ESAPI 8 x 10 1.30 5.00 Multi DKX-M12-810-SESAPI/ESAPI 8.75 x 11.75 1.30 6.40 Multi DKX-M12-SM-SESAPI/ESAPI 9.50 x 12.50 1.30 7.50 Multi DKX-M12-MD-SESAPI/ESAPI 10 x 12 1.30 7.10 Multi DKX-M12-1012-SESAPI/ESAPI 10.25 x 13.25 1.30 8.60 Multi DKX-M12-LG-SESAPI/ESAPI 11 x 14 1.30 9.70 Multi DKX-M12-XL-SE

Shooter 8 x 10 1.30 4.60 Multi DKX-M12-810-SHShooter 10 x 12 1.30 7.00 Multi DKX-M12-1012-SH

PRODUCT SPECIFICATIONS

FULL SIZE SAPI/ESAPI SHOOTER