of 282
7/22/2019 M3000 Upgrade Log
1/282
Last login: Sun Sep 15 07:48:28 2013 from 172.17.6.20
XSCF>
XSCF>
XSCF> version -c xcp
XSCF#0 (Active )
XCP0 (Current): 1101
XCP1 (Reserve): 1101
XSCF>
XSCF>
XSCF> showhardconf
SPARC Enterprise M3000;
+ Serial:PX61117101; Operator_Panel_Switch:Locked;
+ Power_Supply_System:Single; SCF-ID:XSCF#0;
+ System_Power:On; System_Phase:Cabinet Power On;
Domain#0 Domain_Status:Running;
MBU_A Status:Normal; Ver:0301h; Serial:PP1117019C ;
+ FRU-Part-Number:CA07082-D051 E2 /541-4281-05 ;
+ CPU Status:Normal;
+ Freq:2.750 GHz; Type:32;
+ Core:4; Strand:2;
+ Memory_Size:16 GB;
MEM#0A Status:Normal;
7/22/2019 M3000 Upgrade Log
2/282
+ Code:ce0000000000000001M3 93T5160FBA-CE6 4146-430193ed;
+ Type:4B; Size:4 GB;
MEM#1A Status:Normal;
+ Code:ce0000000000000001M3 93T5160FBA-CE6 4146-43019450;
+ Type:4B; Size:4 GB;
MEM#2A Status:Normal;
+ Code:ce0000000000000001M3 93T5160FBA-CE6 4146-43019451;
+ Type:4B; Size:4 GB;
MEM#3A Status:Normal;
+ Code:ce0000000000000001M3 93T5160FBA-CE6 4146-43019417;
+ Type:4B; Size:4 GB;
OPNL Status:Normal; Ver:0101h; Serial:PP111607B2 ;
+ FRU-Part-Number:CA07082-D021 A3 /541-3306-01 ;
PSU#0 Status:Normal; Serial:EA11102593;
+ FRU-Part-Number:CA01022-0720 11L /300-2193-11 ;
+ Power_Status:On;
+ Type:AC;
PSU#1 Status:Normal; Serial:EA11102594;
+ FRU-Part-Number:CA01022-0720 11L /300-2193-11 ;
+ Power_Status:On;
+ Type:AC;
FANBP_B Status:Normal; Ver:0101h; Serial:PP111607AA ;
+ FRU-Part-Number:CA20399-B12X 009AC/541-3304-03 ;
FAN_A#0 Status:Normal;
FAN_A#1 Status:Normal;
7/22/2019 M3000 Upgrade Log
3/282
7/22/2019 M3000 Upgrade Log
4/282
XSCF>
XSCF>
XSCF> getflashimage /tmp/M3000_FW/IKXCP1113.tar.gz
Error: unsupported protocol. URL must start with one of:
http://
https://
ftp://
file://
Usage: getflashimage [-v] [-q -{y|n}] [-u username] [-p proxy [-t proxy_type]] URL
getflashimage -l
getflashimage [-q -{y|n}] -d
getflashimage -h
XSCF> getflashimage -u root ftp://ssdnuas01/tmp/M3000_FW/IKXCP1113.tar.gz
Existing versions:
Version Size Date
IKXCP1101.tar.gz 44027901 Mon Jan 01 00:02:00 UTC 2001
Warning: About to delete existing versions.
Continue? [y|n]: y
Removing IKXCP1101.tar.gz.
Password:
Error: could not resolve host.
XSCF>
XSCF> getflashimage -u root ftp://ssdnuas01/tmp/M3000_FW/IKXCP1113.tar.gz
Password:
7/22/2019 M3000 Upgrade Log
5/282
Error: could not resolve host.
XSCF> getflashimage -u root ftp://ssdnuas01/tmp/M3000_FW/IKXCP1113.tar.gz
Password:
Error: could not resolve host.
XSCF> getflashimage -u root ftp://ssdnuas01/tmp/M3000_FW/IKXCP1113.tar.gz
Password:
Error: could not resolve host.
XSCF>
XSCF>
XSCF> getflashimage -u root ftp://ssdnuas01/tmp/M3000_FW/IKXCP1113.tar.gz
Password:
Error: could not resolve host.
XSCF> getflashimage -u root ftp://172.27.1.14/tmp/M3000_FW/IKXCP1113.tar.gz
Password:
Error: ftp could not retry file.
XSCF> getflashimage -u root ftp://172.27.1.15/tmp/M3000_FW/IKXCP1113.tar.gz
Password:
Error: could not connect.
XSCF> getflashimage -u root ftp://172.27.1.14/tmp/M3000_FW/IKXCP1113.tar.gz
7/22/2019 M3000 Upgrade Log
6/282
Password:
Error: ftp could not retry file.
XSCF>
XSCF> getflashimage -u root ftp://172.27.1.38/tmp/M3000_FW/IKXCP1113.tar.gz
Password:
Error: ftp access denied
XSCF> show
showad showconsolepath showhardconf shownameserver showsmtp
showaltitude showdate showhostname shownetwork showsnmp
showapcs showdateoffset showhttps shownotice showsnmpusm
showarchiving showdcl showldap showntp showsnmpvacm
showaudit showdevices showldapssl showpacketfilters showssh
showautologout showdomainmode showlocale showpasswordpolicy
showstatus
showboards showdomainstatus showlocator showpowerupdelay showsunmc
showcod showdscp showloginlockout showprefetchmode showtelnet
showcodactivation showdualpowerfeed showlogs showresult showtimezone
showcodactivationhistory showemailreport showlookup showroute showuser
showcodlicense showenvironment showmodes showservicetag
showcodusage showfru showmonitorlog showshutdowndelay
XSCF> showssh
SSH status: enabled
SSH DSCP: accept
RSA key:
7/22/2019 M3000 Upgrade Log
7/282
ssh-rsa
AAAAB3NzaC1yc2EAAAABIwAAAIEAs20WLwFoxV8U2jU99VtwU+Xxhp2eQYzVdwQ6QbKd/vEv4/nMGJXZl
gsIGr7cFfVL5riF3jC5ehGZYU7rKFszCPHBJXsPnWB09AeHvL+3idwKGixDIEgDb6CVxTdipJAnjt7pVBANPY6By
2iBKkPYJv4q7fJKeGtedxqW9zgvLCE=
Fingerprint:
1024 bf:af:6e:f1:9e:6d:28:85:77:cf:6c:9e:e1:c2:b9:0a
DSA key:
ssh-dss
AAAAB3NzaC1kc3MAAACBAMe7mzdqJCLnAm07ikoUzoVyTzgUb2R9gM4aeMfaLStJcQiOxtZ/xBEkw5/AVX
416tMJG5eegAVmLulQSiflaE1Gjnc34ruGF9Rk26IhqFdji2IuRppLTjszUSrYu+mq3WYuQHRyZRFV44NCC/o+
yF83YmiGjm+cBBzNSr118+ZFAAAAFQCQlzaI2Ms44qjm/NKLGya0WJfQJQAAAIAJAn3wVJkrDlqp1viznE4Nz
m44xhbtKga1yBy5E1IGBi2vJbdMQ6LYi+q51E3yyTmzO52Bdf/X9EJbOXfUZ+Ep+iciLIHgm2xtkpMZBvuNB9
QrbMBUemCayNKAv8+ekiYfJV2u9OK6ULvQLqKGt3Lb2UN4RVivZ5J2t/RSB7yp6AAAAIEAwpbtyqd3k2ZFLc4uDV9xq8JZhDBmS2+Gy+LhtwLo8iK2pRibZ5nTEJXz0LwxdiocanUeSFEhDmIAAs33AAjjnlsdt3Pahm3UTN3
X4zEQBn50iAvP3Bp66d8rTMN6FYpup6QFq9uYbZkj8NSqNVJBAHpPSMdGXYb4KASEXkcVcHI=
Fingerprint:
1024 21:2b:9a:cc:3d:e8:93:e5:79:fb:90:8d:f8:40:c7:3b
XSCF> showftp
shell: showftp: command not found
XSCF>
XSCF> getflashimage
Error: missing URL
Usage: getflashimage [-v] [-q -{y|n}] [-u username] [-p proxy [-t proxy_type]] URL
getflashimage -l
getflashimage [-q -{y|n}] -d
getflashimage -h
XSCF> getflashimage file:///tmp/M3000_FW/IKXCP1113.tar.gz
Error: file must refer to USB device (file:///media/usb_msd/).
Usage: getflashimage [-v] [-q -{y|n}] [-u username] [-p proxy [-t proxy_type]] URL
7/22/2019 M3000 Upgrade Log
8/282
7/22/2019 M3000 Upgrade Log
9/282
*Note*
This command only issues the instruction to power-on.
The result of the instruction can be checked by the "showlogs power".
XSCF>
XSCF>
XSCF>
XSCF> console -d 0
Connect to DomainID 0?[y|n] :y
POST Sequence 01 CPU Check
POST Sequence 02 Banner
LSB#00 (XSB#00-0): POST 2.15.0 (2010/10/06 14:25)
POST Sequence 03 Fatal Check
POST Sequence 04 CPU Register
POST Sequence 05 STICK
POST Sequence 06 MMU
POST Sequence 07 Memory Initialize
POST Sequence 08 Memory
POST Sequence 09 Raw UE In Cache
POST Sequence 0A Floating Point Unit
POST Sequence 0B SC
POST Sequence 0C Cacheable Instruction
POST Sequence 0D Softint
POST Sequence 0E CPU Cross Call
POST Sequence 0F CMU-CH
7/22/2019 M3000 Upgrade Log
10/282
POST Sequence 10 PCI-CH
POST Sequence 11 Master Device
POST Sequence 12 DSCP
POST Sequence 13 SC Check Before STICK Diag
POST Sequence 14 STICK Stop
POST Sequence 15 STICK Start
POST Sequence 16 Error CPU Check
POST Sequence 17 System Configuration
POST Sequence 18 System Status Check
POST Sequence 19 System Status Check After Sync
POST Sequence 1A OpenBoot Start...
POST Sequence Complete.
SPARC Enterprise M3000 Server, using Domain console
Copyright (c) 1998, 2010, Oracle and/or its affiliates. All rights reserved.
Copyright (c) 2010, Oracle and/or its affiliates and Fujitsu Limited. All rights reserved.
OpenBoot 4.24.16, 16384 MB memory installed, Serial #10048241.
Ethernet address 0:b:5d:e2:52:f1, Host ID: 809952f1.
Boot device: disk File and args:
SunOS Release 5.10 Version Generic_142900-13 64-bit
Copyright 1983-2010 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
7/22/2019 M3000 Upgrade Log
11/282
ssdnuas01 console login: WARNING: Time of Day clock error: reason [Stalled]. -- Stopped tracking Time
Of Day clock.
ssdnuas01 console login:
ssdnuas01 console login:
ssdnuas01 console login: exit from console.
XSCF>
XSCF>
XSCF> cd /media
shell: cd: command not found
XSCF>
XSCF>
XSCF> ls
shell: ls: command not found
XSCF>
XSCF>
XSCF> getflashimage file:///media/usb_msd/1.DATA/M3000timed out waiting for input: auto-logout
Last login: Sun Sep 15 08:50:19 2013 from 172.17.6.20
XSCF>
XSCF>
XSCF>
XSCF> getflashimage file:///media/usb_msd/1.DATA/M300
FW/p14216085_1113_Geniric/IKXCP1113.tar
7/22/2019 M3000 Upgrade Log
12/282
Error: missing URL
Usage: getflashimage [-v] [-q -{y|n}] [-u username] [-p proxy [-t proxy_type]] URL
getflashimage -l
getflashimage [-q -{y|n}] -d
getflashimage -h
XSCF>
XSCF> show
showad showconsolepath showhardconf shownameserver showsmtp
showaltitude showdate showhostname shownetwork showsnmp
showapcs showdateoffset showhttps shownotice showsnmpusm
showarchiving showdcl showldap showntp showsnmpvacm
showaudit showdevices showldapssl showpacketfilters showssh
showautologout showdomainmode showlocale showpasswordpolicy
showstatus
showboards showdomainstatus showlocator showpowerupdelay showsunmc
showcod showdscp showloginlockout showprefetchmode showtelnet
showcodactivation showdualpowerfeed showlogs showresult showtimezone
showcodactivationhistory showemailreport showlookup showroute showuser
showcodlicense showenvironment showmodes showservicetag
showcodusage showfru showmonitorlog showshutdowndelay
XSCF> showfru
Invalid parameter.
usage : showfru -a device
showfru device location
showfru -h
XSCF> showfru -a
7/22/2019 M3000 Upgrade Log
13/282
Invalid parameter.
usage : showfru -a device
showfru device location
showfru -h
XSCF> showhardconf
SPARC Enterprise M3000;
+ Serial:PX61117101; Operator_Panel_Switch:Locked;
+ Power_Supply_System:Single; SCF-ID:XSCF#0;
+ System_Power:On; System_Phase:Cabinet Power On;
Domain#0 Domain_Status:Running;
MBU_A Status:Normal; Ver:0301h; Serial:PP1117019C ;
+ FRU-Part-Number:CA07082-D051 E2 /541-4281-05 ;
+ CPU Status:Normal;
+ Freq:2.750 GHz; Type:32;
+ Core:4; Strand:2;
+ Memory_Size:16 GB;
MEM#0A Status:Normal;
+ Code:ce0000000000000001M3 93T5160FBA-CE6 4146-430193ed;
+ Type:4B; Size:4 GB;
MEM#1A Status:Normal;
+ Code:ce0000000000000001M3 93T5160FBA-CE6 4146-43019450;
+ Type:4B; Size:4 GB;
MEM#2A Status:Normal;
+ Code:ce0000000000000001M3 93T5160FBA-CE6 4146-43019451;
7/22/2019 M3000 Upgrade Log
14/282
+ Type:4B; Size:4 GB;
MEM#3A Status:Normal;
+ Code:ce0000000000000001M3 93T5160FBA-CE6 4146-43019417;
+ Type:4B; Size:4 GB;
OPNL Status:Normal; Ver:0101h; Serial:PP111607B2 ;
+ FRU-Part-Number:CA07082-D021 A3 /541-3306-01 ;
PSU#0 Status:Normal; Serial:EA11102593;
+ FRU-Part-Number:CA01022-0720 11L /300-2193-11 ;
+ Power_Status:On;
+ Type:AC;
PSU#1 Status:Normal; Serial:EA11102594;
+ FRU-Part-Number:CA01022-0720 11L /300-2193-11 ;
+ Power_Status:On;
+ Type:AC;
FANBP_B Status:Normal; Ver:0101h; Serial:PP111607AA ;
+ FRU-Part-Number:CA20399-B12X 009AC/541-3304-03 ;
FAN_A#0 Status:Normal;
FAN_A#1 Status:Normal;
XSCF> getflashimage
file:///media/usb_msd/1.DATA/M300_FW/p14216085_1113_Geniric/IKXCP1113.tar
Error: invalid file name: IKXCP1113.tar
XSCF> getflashimage
file:///media/usb_msd/1.DATA/M3000_FW/p14216085_1113_Geniric/IKXCP1113.tar
Error: invalid file name: IKXCP1113.tar
XSCF> getflashimage
file:///media/usb_msd/1.DATA/M3000_FW/p14216085_1113_Generic/IKXCP1113.tar
Error: invalid file name: IKXCP1113.tar
7/22/2019 M3000 Upgrade Log
15/282
XSCF> getflashimage
file:///media/usb_msd/1.DATA/M3000_FW/p14216085_1113_Geniric/IKXCP1113.tar.gz
Error: read error, or file not found.
XSCF> getflashimage file:///media/usb_msd/1.DATA/M3000
FW/p14216085_1113_Geniric/IKXCP1113.tar.gz
Error: missing URL
Usage: getflashimage [-v] [-q -{y|n}] [-u username] [-p proxy [-t proxy_type]] URL
getflashimage -l
getflashimage [-q -{y|n}] -d
getflashimage -h
XSCF> getflashimage
file:///media/usb_msd/1.DATA/M3000_FW/p14216085_1113_Generic/IKXCP1113.tar.gz
Error: read error, or file not found.
XSCF> getflashimage
file:///media/usb_msd/1.DATA/M3000_FW/p14216085_1113_Generic/IKXCP1113.tar.gz
Error: read error, or file not found.
XSCF> timed out waiting for input: auto-logout
Last login: Sun Sep 15 09:06:35 2013 from 172.17.6.20
XSCF>
XSCF>
XSCF>
XSCF> getflashimage file:///media/usb_msd/IKXCP1113.tar
Error: invalid file name: IKXCP1113.tar
XSCF> getflashimage file:///media/usb_msd/IKXCP1113.tar.gz
Error: read error, or file not found.
XSCF> getflashimage file:///media/usb_msd/IKXCP1113
Error: invalid file name: IKXCP1113
7/22/2019 M3000 Upgrade Log
16/282
7/22/2019 M3000 Upgrade Log
17/282
17MB received
18MB received
19MB received
20MB received
21MB received
22MB received
23MB received
24MB received
25MB received
26MB received
27MB received
28MB received
29MB received
30MB received
31MB received
32MB received
33MB received
34MB received
35MB received
36MB received
37MB received
38MB received
39MB received
40MB received
41MB received
7/22/2019 M3000 Upgrade Log
18/282
42MB received
Download successful: 43185 Kbytes in 47 secs (929.419 Kbytes/sec)
Checking file...
MD5: 543cb64b131949cd60c08c40eacc9431
XSCF>
XSCF>
XSCF> getflashimage -l
Existing versions:
Version Size Date
IKXCP1113.tar.gz 44221894 Sun Sep 15 13:24:59 UTC 2013
XSCF>
XSCF>
XSCF>
XSCF> version -c xcp -v
XSCF#0 (Active )
XCP0 (Current): 1101
OpenBoot PROM : 02.21.0000
XSCF : 01.10.0001
XCP1 (Reserve): 1101
OpenBoot PROM : 02.21.0000
XSCF : 01.10.0001
OpenBoot PROM BACKUP
#0: 02.21.0000
#1: --.--.----
XSCF>
7/22/2019 M3000 Upgrade Log
19/282
XSCF> flashupdate -c check -m xcp -s 1113
XCP update is possible with domains up
XSCF>
XSCF>
XSCF> showhardconf
SPARC Enterprise M3000;
+ Serial:PX61117101; Operator_Panel_Switch:Locked;
+ Power_Supply_System:Single; SCF-ID:XSCF#0;
+ System_Power:On; System_Phase:Cabinet Power On;
Domain#0 Domain_Status:Running;
MBU_A Status:Normal; Ver:0301h; Serial:PP1117019C ;
+ FRU-Part-Number:CA07082-D051 E2 /541-4281-05 ;
+ CPU Status:Normal;
+ Freq:2.750 GHz; Type:32;
+ Core:4; Strand:2;
+ Memory_Size:16 GB;
MEM#0A Status:Normal;
+ Code:ce0000000000000001M3 93T5160FBA-CE6 4146-430193ed;
+ Type:4B; Size:4 GB;
MEM#1A Status:Normal;
+ Code:ce0000000000000001M3 93T5160FBA-CE6 4146-43019450;
+ Type:4B; Size:4 GB;
MEM#2A Status:Normal;
+ Code:ce0000000000000001M3 93T5160FBA-CE6 4146-43019451;
7/22/2019 M3000 Upgrade Log
20/282
+ Type:4B; Size:4 GB;
MEM#3A Status:Normal;
+ Code:ce0000000000000001M3 93T5160FBA-CE6 4146-43019417;
+ Type:4B; Size:4 GB;
OPNL Status:Normal; Ver:0101h; Serial:PP111607B2 ;
+ FRU-Part-Number:CA07082-D021 A3 /541-3306-01 ;
PSU#0 Status:Normal; Serial:EA11102593;
+ FRU-Part-Number:CA01022-0720 11L /300-2193-11 ;
+ Power_Status:On;
+ Type:AC;
PSU#1 Status:Normal; Serial:EA11102594;
+ FRU-Part-Number:CA01022-0720 11L /300-2193-11 ;
+ Power_Status:On;
+ Type:AC;
FANBP_B Status:Normal; Ver:0101h; Serial:PP111607AA ;
+ FRU-Part-Number:CA20399-B12X 009AC/541-3304-03 ;
FAN_A#0 Status:Normal;
FAN_A#1 Status:Normal;
XSCF>
XSCF>
XSCF> flashupdate -c update -m xcp -s 1113
The XSCF will be reset. Continue? [y|n] :y
Checking the XCP image file, please wait a minute
XCP update is started (XCP version=1113:last version=1101)
OpenBoot PROM update is started (OpenBoot PROM version=02290000)
7/22/2019 M3000 Upgrade Log
21/282
OpenBoot PROM update has been completed (OpenBoot PROM version=02290000)
XSCF update is started (XSCFU=0,bank=1,XCP version=1113:last version=1101)
XSCF download is started (XSCFU=0,bank=1,XCP version=1113:last version=1101, Firmware Element
ID=00:version=01110003:last version=01100001)
XSCF download has been completed (XSCFU=0,bank=1,XCP version=1113:last version=1101, Firmware
Element ID=00:version=01110003:last version=01100001)
XSCF download is started (XSCFU=0,bank=1,XCP version=1113:last version=1101, Firmware Element
ID=01:version=01110003:last version=01100001)
XSCF download has been completed (XSCFU=0,bank=1,XCP version=1113:last version=1101, Firmware
Element ID=01:version=01110003:last version=01100001)
XSCF download is started (XSCFU=0,bank=1,XCP version=1113:last version=1101, Firmware Element
ID=02:version=01100001:last version=01100001)
XSCF download has been completed (XSCFU=0,bank=1,XCP version=1113:last version=1101, Firmware
Element ID=02:version=01100001:last version=01100001)
XSCF download is started (XSCFU=0,bank=1,XCP version=1113:last version=1101, Firmware Element
ID=03:version=01110003:last version=01100001)
XSCF download has been completed (XSCFU=0,bank=1,XCP version=1113:last version=1101, Firmware
Element ID=03:version=01110003:last version=01100001)
XSCF download is started (XSCFU=0,bank=1,XCP version=1113:last version=1101, Firmware ElementID=04:version=01110003:last version=01100001)
XSCF download has been completed (XSCFU=0,bank=1,XCP version=1113:last version=1101, Firmware
Element ID=04:version=01110003:last version=01100001)
XSCF download is started (XSCFU=0,bank=1,XCP version=1113:last version=1101, Firmware Element
ID=05:version=01110000:last version=01100001)
XSCF download has been completed (XSCFU=0,bank=1,XCP version=1113:last version=1101, Firmware
Element ID=05:version=01110000:last version=01100001)
XSCF download is started (XSCFU=0,bank=1,XCP version=1113:last version=1101, Firmware Element
ID=07:version=01090001:last version=01090001)
XSCF download has been completed (XSCFU=0,bank=1,XCP version=1113:last version=1101, Firmware
Element ID=07:version=01090001:last version=01090001)
XSCF update has been completed (XSCFU=0,bank=1,XCP version=1113:last version=1101)
7/22/2019 M3000 Upgrade Log
22/282
XSCF is rebooting to update the reserve bank
flashupdate now in progress.
please wait for flashupdate complete
Last login: Sun Sep 15 13:15:22 2013 from 172.17.6.20
flashupdate now in progress.
please wait for flashupdate complete
XSCF>
XSCF>
XSCF> showhardconf
SPARC Enterprise M3000;
+ Serial:PX61117101; Operator_Panel_Switch:Locked;
+ Power_Supply_System:Single; SCF-ID:XSCF#0;
+ System_Power:On; System_Phase:Cabinet Power On;
Domain#0 Domain_Status:Running;
MBU_A Status:Normal; Ver:0301h; Serial:PP1117019C ;
+ FRU-Part-Number:CA07082-D051 E2 /541-4281-05 ;
+ CPU Status:Normal;
+ Freq:2.750 GHz; Type:32;
+ Core:4; Strand:2;
+ Memory_Size:16 GB;
7/22/2019 M3000 Upgrade Log
23/282
MEM#0A Status:Normal;
+ Code:ce0000000000000001M3 93T5160FBA-CE6 4146-430193ed;
+ Type:4B; Size:4 GB;
MEM#1A Status:Normal;
+ Code:ce0000000000000001M3 93T5160FBA-CE6 4146-43019450;
+ Type:4B; Size:4 GB;
MEM#2A Status:Normal;
+ Code:ce0000000000000001M3 93T5160FBA-CE6 4146-43019451;
+ Type:4B; Size:4 GB;
MEM#3A Status:Normal;
+ Code:ce0000000000000001M3 93T5160FBA-CE6 4146-43019417;
+ Type:4B; Size:4 GB;
OPNL Status:Normal; Ver:0101h; Serial:PP111607B2 ;
+ FRU-Part-Number:CA07082-D021 A3 /541-3306-01 ;
PSU#0 Status:Normal; Serial:EA11102593;
+ FRU-Part-Number:CA01022-0720 11L /300-2193-11 ;
+ Power_Status:On;
+ Type:AC;
PSU#1 Status:Normal; Serial:EA11102594;
+ FRU-Part-Number:CA01022-0720 11L /300-2193-11 ;
+ Power_Status:On;
+ Type:AC;
FANBP_B Status:Normal; Ver:0101h; Serial:PP111607AA ;
+ FRU-Part-Number:CA20399-B12X 009AC/541-3304-03 ;
FAN_A#0 Status:Normal;
7/22/2019 M3000 Upgrade Log
24/282
FAN_A#1 Status:Normal;
XSCF> version -c xcp -v
XSCF#0 (Active )
XCP0 (Reserve): 1101
OpenBoot PROM : 02.21.0000
XSCF : 01.10.0001
XCP1 (Current): 1113
OpenBoot PROM : 02.29.0000
XSCF : 01.11.0003
OpenBoot PROM BACKUP
#0: 02.21.0000
#1: 02.29.0000
XSCF>
XSCF>
XSCF> showlogs monitor
Jun 7 04:33:01 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 04:37:55 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 04:42:13 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 04:44:40 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 04:59:16 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 05:02:58 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 05:06:38 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 05:09:42 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
7/22/2019 M3000 Upgrade Log
25/282
Jun 7 05:16:21 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 05:18:12 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 05:24:53 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 05:26:08 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 05:31:35 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 05:34:02 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 05:48:34 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 05:51:03 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 05:56:31 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 05:58:22 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 06:11:05 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 06:14:09 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 06:19:02 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 06:21:29 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 06:35:59 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 06:45:04 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 07:04:59 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-2) mode
Jun 7 07:16:30 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 07:20:48 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
7/22/2019 M3000 Upgrade Log
26/282
Jun 7 07:25:04 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 07:27:34 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 07:52:16 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 09:07:30 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 09:10:34 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 09:14:49 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 09:20:55 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 10:23:29 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-2) mode
Jun 7 10:25:57 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 10:30:15 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 10:33:32 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 10:54:20 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 10:54:59 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 13:09:03 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 13:12:46 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 14:44:22 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 14:48:01 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 14:54:42 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 14:58:23 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
7/22/2019 M3000 Upgrade Log
27/282
Jun 7 15:08:38 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 15:11:07 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 16:04:50 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 16:06:05 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 16:11:36 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 16:14:39 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 16:18:57 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 16:23:17 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 16:26:22 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 16:30:37 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 16:33:05 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 16:39:50 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 16:43:36 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 16:48:26 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 16:52:05 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 17:03:40 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 17:08:23 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-2) mode
Jun 7 17:37:21 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 17:41:02 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
7/22/2019 M3000 Upgrade Log
28/282
Jun 7 19:14:31 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 19:21:13 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 19:33:20 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 19:38:13 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 19:42:29 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 19:46:45 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 7 19:50:24 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 7 19:54:04 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-2) mode
Jun 8 00:42:36 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 8 00:43:15 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 8 02:34:31 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 8 02:36:22 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 8 03:30:29 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 8 03:31:44 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 8 04:30:11 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 8 04:33:17 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 8 04:38:44 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-3) mode
Jun 8 04:40:35 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 8 04:46:03 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
7/22/2019 M3000 Upgrade Log
29/282
Jun 8 04:50:21 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 8 07:27:26 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 8 07:29:55 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 8 07:39:35 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 8 07:44:30 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 8 07:48:10 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 9 06:09:30 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 9 06:11:23 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 9 23:30:48 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 9 23:31:27 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 9 23:57:57 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 9 23:59:51 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 01:25:57 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 01:28:25 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 04:34:19 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 04:42:13 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 04:49:29 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 04:53:10 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 05:38:59 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 05:42:02 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
7/22/2019 M3000 Upgrade Log
30/282
Jun 10 05:54:06 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 06:02:00 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 06:09:53 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 06:13:35 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 06:27:28 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 06:31:47 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 06:34:16 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 06:37:55 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 06:38:34 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 07:25:41 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 07:26:20 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 07:40:14 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 07:42:42 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 07:56:01 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 07:57:55 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 08:04:01 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 08:07:38 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-2) mode
Jun 10 08:42:08 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 08:48:14 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
7/22/2019 M3000 Upgrade Log
31/282
Jun 10 09:00:55 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 09:04:01 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 09:08:16 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 09:12:31 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 09:17:24 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 09:21:40 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 09:27:07 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 09:30:13 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-2) mode
Jun 10 09:36:18 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 09:39:21 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 09:44:05 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 09:50:14 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 09:54:08 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 09:58:43 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 10:14:27 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 10:16:18 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 10:21:46 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 10:24:13 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 10:31:28 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
7/22/2019 M3000 Upgrade Log
32/282
Jun 10 10:34:34 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 10:39:26 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 10:42:32 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 10:45:35 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 10:51:08 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 11:14:40 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 11:20:11 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 11:23:51 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 11:27:30 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 11:33:00 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 11:38:29 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 11:42:44 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 11:47:39 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 11:49:30 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 14:04:47 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 14:24:12 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 14:36:58 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-2) mode
Jun 10 14:39:26 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 14:43:41 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
7/22/2019 M3000 Upgrade Log
33/282
Jun 10 15:19:58 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 15:26:03 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 15:36:24 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 15:40:05 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 15:58:48 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 10 16:01:15 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 10 18:14:47 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 10 18:16:03 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 10 18:58:12 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 10 19:00:42 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 10 20:12:18 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 10 20:14:11 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 10 20:55:09 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 10 20:58:12 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 10 21:16:56 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 10 21:21:11 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 10 21:38:43 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-3) mode
Jun 10 21:42:24 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 10 21:47:16 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
7/22/2019 M3000 Upgrade Log
34/282
Jun 10 21:48:32 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 10 21:55:12 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 10 21:57:42 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 10 22:01:59 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 10 22:04:28 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 10 22:11:10 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 10 22:13:01 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 10 22:32:26 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-3) mode
Jun 10 22:34:18 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 10 22:49:23 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 10 22:51:15 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 10 23:18:59 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 10 23:20:14 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 10 23:27:34 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 10 23:29:27 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 10 23:49:56 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 10 23:53:03 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 00:37:40 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 00:39:33 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
7/22/2019 M3000 Upgrade Log
35/282
Jun 11 00:43:49 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 00:45:04 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 01:18:46 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 01:20:38 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 01:41:10 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 01:43:39 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 01:48:32 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 01:50:25 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 01:54:25 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 01:57:44 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 02:27:58 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 02:29:50 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 02:34:41 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 02:39:00 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 02:42:03 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 02:46:58 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 02:57:56 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-3) mode
Jun 11 03:01:36 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 03:13:11 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
7/22/2019 M3000 Upgrade Log
36/282
Jun 11 03:15:40 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 03:44:42 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 03:48:23 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 03:51:27 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 03:56:19 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 04:01:11 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 04:04:32 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 04:09:06 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-3) mode
Jun 11 04:19:26 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 04:23:05 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 04:26:46 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 04:32:13 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 04:34:42 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 04:46:48 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 04:52:19 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 05:39:27 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 05:50:21 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 06:01:16 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 06:05:01 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
7/22/2019 M3000 Upgrade Log
37/282
7/22/2019 M3000 Upgrade Log
38/282
Jun 11 08:31:52 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 11 08:36:46 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 11 08:39:13 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 11 08:45:17 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 11 11:14:26 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 11 11:17:31 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 11 11:49:32 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 11 11:51:23 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 11 11:58:41 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 11 12:01:08 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 11 12:06:39 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 11 12:09:07 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 11 12:33:55 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 11 12:35:10 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 11 12:59:59 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 11 13:01:50 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 11 13:07:54 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-2) mode
Jun 11 13:13:59 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 11 13:27:52 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
7/22/2019 M3000 Upgrade Log
39/282
Jun 11 13:31:31 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 11 13:35:11 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 11 13:41:16 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 11 13:44:20 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 11 13:47:59 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 11 13:51:03 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 11 15:20:50 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 11 15:26:17 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-2) mode
Jun 11 17:44:44 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 17:47:12 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 17:54:28 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 17:56:21 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 18:02:26 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 18:04:47 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 18:21:09 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 18:24:13 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 18:38:07 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-3) mode
Jun 11 18:41:47 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 18:47:15 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
7/22/2019 M3000 Upgrade Log
40/282
Jun 11 18:50:20 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 18:56:24 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 19:00:03 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 19:06:07 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 19:12:46 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 19:54:55 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 19:57:22 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 20:12:31 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-3) mode
Jun 11 20:14:51 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 20:30:04 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 20:32:31 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 20:48:16 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 20:51:19 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 20:56:11 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 20:59:51 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 21:06:31 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 21:10:48 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 21:15:40 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 21:19:56 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
7/22/2019 M3000 Upgrade Log
41/282
Jun 11 21:35:41 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 21:39:20 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 21:43:04 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 21:46:43 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 21:53:59 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 21:57:04 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 22:01:20 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 22:06:50 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 22:11:06 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 22:25:09 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 22:30:01 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 22:44:34 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 22:48:14 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 23:02:45 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 23:07:36 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 23:11:18 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 23:16:45 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-3) mode
Jun 11 23:22:14 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 23:27:06 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
7/22/2019 M3000 Upgrade Log
42/282
Jun 11 23:31:22 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 23:36:14 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 23:39:54 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 23:46:00 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 11 23:49:41 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 11 23:55:47 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 12 00:18:47 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 00:21:50 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-3) mode
Jun 12 00:28:30 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 00:34:02 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 12 00:38:20 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 00:43:15 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 12 00:49:56 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 00:53:00 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 12 00:59:44 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 01:01:00 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 12 01:05:51 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 01:10:42 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 12 01:11:21 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
7/22/2019 M3000 Upgrade Log
43/282
Jun 12 01:28:15 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 12 01:31:57 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 01:38:38 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 12 01:41:06 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 01:48:24 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 12 01:49:39 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 02:08:20 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 12 02:09:35 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 02:17:28 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 12 02:21:47 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 02:26:39 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 12 02:31:31 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 02:37:00 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 12 02:42:28 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 02:46:08 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 12 02:49:14 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 02:57:43 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-3) mode
Jun 12 02:59:36 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 03:16:29 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
7/22/2019 M3000 Upgrade Log
44/282
Jun 12 03:19:34 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 03:43:05 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 12 03:47:26 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 03:55:10 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 12 03:58:59 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 04:32:44 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 12 04:34:36 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 07:08:48 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 07:12:27 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 07:14:58 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 11:01:24 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 11:03:54 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 11:22:34 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 11:35:54 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 11:39:34 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 11:45:40 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 11:48:44 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 11:51:13 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 11:57:17 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 12:02:09 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
7/22/2019 M3000 Upgrade Log
45/282
Jun 12 12:07:02 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 12:10:43 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 12:15:17 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 12:16:48 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 12:42:46 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 12:46:27 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 12:53:07 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 12:56:48 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 14:04:24 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 14:08:40 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 14:14:09 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 14:20:16 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 14:23:22 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 14:25:23 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 14:31:55 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 14:36:13 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 14:39:19 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-2) mode
Jun 12 14:42:23 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 14:55:04 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
7/22/2019 M3000 Upgrade Log
46/282
Jun 12 14:57:31 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 15:49:57 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 15:55:26 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 15:56:41 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 16:01:34 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 16:07:38 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 16:08:53 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 16:16:47 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-2) mode
Jun 12 16:17:26 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 16:21:42 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 16:36:14 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 16:39:55 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 16:46:03 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 16:49:07 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 19:13:36 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 19:17:54 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 20:28:56 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-3) mode
Jun 12 20:32:00 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 12 23:01:15 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
7/22/2019 M3000 Upgrade Log
47/282
Jun 12 23:04:57 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 23:21:14 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 23:25:32 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 23:31:35 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 23:35:51 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 12 23:40:07 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 12 23:46:12 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 13 00:41:37 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 00:42:55 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 02:42:02 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 02:45:41 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 02:51:46 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 02:55:37 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 03:01:31 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 03:06:22 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 03:13:02 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 03:15:40 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 03:20:57 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 03:25:14 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
7/22/2019 M3000 Upgrade Log
48/282
Jun 13 03:39:49 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 03:44:04 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 03:53:09 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 03:55:36 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 04:02:17 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 04:04:08 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 04:12:35 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 04:15:05 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 04:24:09 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 04:24:48 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 04:42:17 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 04:44:44 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 05:20:52 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 05:34:15 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 05:49:22 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 05:54:15 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 05:58:32 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-3) mode
Jun 13 06:03:24 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 06:07:39 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
7/22/2019 M3000 Upgrade Log
49/282
Jun 13 06:13:43 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 06:17:59 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 06:21:39 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 06:28:54 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 06:31:59 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 06:38:04 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 06:42:55 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 06:47:47 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-3) mode
Jun 13 06:52:02 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 06:58:05 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 07:02:22 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 07:09:02 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 07:14:31 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 07:16:58 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 13 07:18:52 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 13 07:29:44 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 07:32:12 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 07:55:46 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 07:59:28 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
7/22/2019 M3000 Upgrade Log
50/282
Jun 13 08:05:49 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 08:09:46 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 08:14:01 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 08:19:31 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 08:23:10 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 08:27:27 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 08:33:33 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 08:38:26 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 08:42:41 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 08:47:34 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 08:52:25 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 08:56:40 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 09:01:32 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 09:05:12 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 09:51:32 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 09:54:02 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 10:00:06 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-3) mode
Jun 13 10:03:11 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 10:38:45 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
7/22/2019 M3000 Upgrade Log
51/282
Jun 13 10:42:28 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 13 11:04:11 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 13 11:06:06 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 13 11:12:46 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 13 11:15:52 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 13 11:28:36 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 13 11:31:43 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 13 11:47:25 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 13 11:49:17 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 13 12:03:47 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 13 12:08:06 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 13 13:32:57 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 13 13:36:01 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 13 13:40:53 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 13 13:43:56 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 13 13:48:11 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 13 13:50:04 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-2) mode
Jun 13 14:55:42 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 14:57:33 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
7/22/2019 M3000 Upgrade Log
52/282
Jun 13 15:14:27 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 13 15:15:56 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 13 15:20:34 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 13 15:24:51 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 13 16:56:00 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 16:59:55 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 19:10:12 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 19:13:53 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 20:49:34 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 20:50:13 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 20:59:54 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 21:01:09 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 22:21:59 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 22:26:07 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 22:39:27 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 22:41:56 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 22:49:14 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-3) mode
Jun 13 22:50:29 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 23:05:03 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
7/22/2019 M3000 Upgrade Log
53/282
Jun 13 23:09:55 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 23:15:23 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 23:17:14 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 23:35:22 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 23:39:06 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 23:43:23 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 13 23:46:26 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 13 23:52:29 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-3) mode
Jun 13 23:56:45 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 00:01:38 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 00:05:55 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 00:13:12 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 00:15:39 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 00:32:00 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 00:35:04 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 00:40:31 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 00:43:34 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 01:04:05 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
Jun 14 01:08:20 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 14 01:12:36 UAS monitor_msg: SCF:FANs are changed from Low speed (level-2) mode
7/22/2019 M3000 Upgrade Log
54/282
Jun 14 01:17:27 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-2) mode
Jun 14 02:14:01 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 02:16:15 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 02:21:20 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 02:23:11 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 02:30:29 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 02:32:21 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 02:40:14 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 02:42:05 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 02:50:01 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 02:51:53 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 02:56:45 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 03:03:24 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 03:06:31 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 03:13:10 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 03:16:50 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 03:22:54 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 03:26:19 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 03:31:58 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
7/22/2019 M3000 Upgrade Log
55/282
Jun 14 03:35:37 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 03:52:31 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 03:57:26 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 04:01:05 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 04:04:09 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 04:11:25 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 04:13:53 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 04:19:57 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 04:23:04 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 04:38:12 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 04:41:53 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 04:48:33 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 04:51:36 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 04:57:40 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 05:00:45 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
Jun 14 05:06:12 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 05:08:41 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed toLow speed (level-3) mode
Jun 14 05:22:00 UAS monitor_msg: SCF:FANs are changed from Low speed (level-3) mode
Jun 14 05:26:51 UAS monitor_msg: SCF:Low temperature was detected at air inlet. FANs are changed to
Low speed (level-3) mode
7/22/2019 M3000