M36LED_Shapes_Recessed_v1.2[1C]In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
* Custom colors are available, Please consult factory
Order Code: - - - - - -
Emergency Options
Driver
EC Emergency Circuit Wiring (consult factory)
DE15,6 Lutron 1% EcoSystem
DC25,6,7 Lutron 1% 2-Wire
- - -
DL Damp Location Rated
FS In-line Fuse
Fixture Options
DIM5 0-10V (Linear)
- - -
EMR Remote Micro Inverter (consult factory)
DC5 Lutron 5% 5-Series (consult factory)
Series L36 Multi-Mount Form
Light Engine
CCT 930 3000K 90+ CRI
935 3500K 90+ CRI
940 4000K 90+ CRI
Shielding LW LED Optimized White Lens
MI Clear Lensw/Microprism
NB LMO Symmetric
BW LMO Batwing
L36 Mounting
or
L36R Mounting RC4 Rotating Crossbar (Ceilings 1/4” to 2” thick)
SF14 Spackle Flange(1/2” drywall)
SF24 Spackle Flange(5/8” drywall)
SF34 Spackle Flange(after drywall)
Shape and Nominal Length
Finish WH White
SV Silver
SP Specify Premium Color
Voltage 1120 Volt
2277 Volt
L36R
L36R
927 2700K90+ CRI
TS4 1” 1/4”-20 stud
U120 through 277 50/60hz capable
BL Semi-Matte Black
3347 Volt (consult factory)
1 Values calculated from a 4’ 90 CRI fixture at 3500K using LW shielding and a DIM driver. For additional information, please see page 2.
2 Not available with Lutron
3 Consult factory for lead times
TX QXY HX Triangle Rectangle/ Hexagon Square
4 1’ triangle, square and hexagon, along with 2’ triangle and square are supplied as one housing. All other sizes and shapes are supplied in multiple housings joined together in the field.
*X = 1’, 2’, 3’, 4’ *Y = 1’, 2’, 3’, 4’
* Select shape and add nominal side length. For rectangles, indicate length and width. Example: Use T4 for a Triangle with sides 4’ long.
* For other lengths, shapes or configurations, please consult factory.
5 See page 7 for details6 Not available in 1’ side length7 120V only
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Shielding - Extruded, impact resistant acrylic lens:- LED Optimized White Lens (LW)- Clear Lens with Microprism Inlay (MI)- “LMO” Symmetric Lens (NB)- “LMO” Batwing (BW)“LMO” refers to the Selux proprietary LED optical system - Light Modulation Optics.
Mounting(s) - Spackle in (drywall), Rotating Cross-bar, and Threaded Stud Mountings (see pages 3 through 6 for details).
Standard Luminaire lengths - All standard luminaires are supplied in nominal lengths to ensure full, even illumination. ** Individual luminaires are not joinable in the field.
Exact length luminaires - Sizes and shapes other than those indicated are available to meet your project needs. Please consult factory with your requirements. ** Lens luminance may soften at the corners for exact length luminaires.
M36 Joiner(s) - 1’ triange, square, and hexagon along with 2’ triangle and square supplied as one housing. All other sizes, shapes, and configurations are supplied in multiple housings joined together in the field using the supplied M36 joiner system. This allows ease of installation and ensures a uniform appearance (see page 9 for details).
Weight - 1.8 lb per foot based on total length.
Electrical/Performance:
LED Light Engine - Brand-name mid-power LEDs create a high efficiency LED light engine able to provide a lumen maintenance of 94% at 25,000 hours and 88% at 60,000 hours at 25ºC per TM-21 reports. Reported L70 >60,000 hours.
Photometrics - Consult website or factory for IES Files. Independent photometric lumen measurement complies with IES LM-79-08 testing procedures. Due to the LED manufacturer’s tolerances, the listed output has a ±5% tolerance. For outputs based on different optics or CCT, please see pages 10-11 for details.
CCT - Available in 2700K, 3000K, 3500K and 4000K, tolerance within a 3-step MacAdam ellipse.
CRI - 90+ and 80+ CRI. Consult factory for lead times of 80 CRI.
All Drivers - High efficiency, constant current, soft start, Electronic Class 2 with a PFC > 0.90. For more detailed information on the available drivers please see page 7.
Thermal Performance:
Ambient Operating Temperature - Luminaires suitable for maximum ambient temperature of 35°C (95°F) for all drivers.
Luminaires are suitable for minimum ambient temperatures of -40ºC (-40ºF) for DIM, DIL, DED, D01, and DL01 drivers. 0ºC (32ºF) for DC2 and DE1 drivers.
Luminaire Finish:
Powder Coat - All Selux luminaries are finished in high quality polyester powder coating in our Tiger Drylac certified facility and are tested in accordance with test specifications for coatings from ASTM and PCI.
All products undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated, and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention.
Standard interior colors are White (WH), Semi-Matte Black (BL), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide.
Warranty:
5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the M36 series LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED light engine when installed according to Selux instructions and operated within the Ambient Temperature. For additional details and exclusions, see “Selux Terms and Condition of Sale.”
Certifications and Compliance: NRTL - For Dry and Damp location (I.E. cULus; cCSAus)ARRA CompliantRoHS Compliant
L36R
Page 3 of 11 (Rev. 09/2020)
M36LED_Shapes_Recessed_v1.2[1C]
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
1. 1/4”-20 Threaded rod to struture (supplied and installed by others).
2. 1/4”-20 Coupler hardware (supplied and installed by others).
3. 1” 1/4”-20 Stud (by Selux).4. Ø5/16” [Ø7mm] mounting hole. 5. Drywall/Drywall screw (Ref.)6. Drywall/Drywall (Ref.)7. 1/6” Plaster skimcoat (Ref.)8. Drywall/Drywall tape (Ref.)9. Brackets installed and shipped in the closed position
by Selux. - For Runs, rotate bracket to open position so the geartray can be removed to make the housing and wiring connections.
- After connections are made, rotate bracket back to the closed position (see installation instructions for full details).
- Brackets to be removed only after the luminaire is completely secured to the drywall through the spackle flange.
1/2” Spackle Flange Mounting (SF1)
11/2” Ref.
11/2” Ref.
5/8” Spackle Flange Mounting (SF2)
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16” (1mm) tolerance.*For rectangle length and width dimensions, reference the square nominal size rows needed.
B INSIDE
AOUTSIDE
POWER FEEDPOWERFEED
BINSIDE
AOUSIDE
BINSIDE
AOUTSIDE
POWER FEED
HOUSINGBREAK
HOUSINGBREAK
HOUSINGBREAK
HOUSINGBREAK
HOUSINGBREAK
HOUSINGBREAK
HOUSINGBREAK
HOUSINGBREAK
CMOUNTING
CMOUNTING
CMOUNTING
CMOUNTING
Shape Hexagon Triangle Square
Nominal Leg Length
A Outside B inside C Mounting A Outside B Inside C Mounting A Outside B Inside C Mounting
Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM
Standard Recessed (L36) housing sections and lens lengths:
For standard shapes and sizes, lens lengths will always be equal to side lengths of the shape. Listed below are the standard shapes in standard sizes. Shapes cannot be combined with linear lengths or other shapes if non-standard shapes and sizes are required.
Page 4 of 11 (Rev. 09/2020)
M36LED_Shapes_Recessed_v1.2[1C]
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
1. Drywall/Drywall screw (Ref.)2. Drywall/Drywall (Ref.)3. 1/6” Plaster skimcoat (Ref.)4. Drywall/Drywall tape (Ref.) 5. Blocking to secure fixture (by others)6. Brackets installed and shipped in the closed position by Selux.
- For Runs, rotate bracket to open position so the geartray can be removed to make the housing and wiring connections.
- After connections are made, rotate bracket back to the closed posi-tion (see installation instructions for full details).
- Brackets to be removed only after the luminaire is completely secured to the drywall through the spackle flange.
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16” (1mm) tolerance.*For rectangle length and width dimensions, reference the square nominal size rows needed.
AOUTSIDE
AOUTSIDE
POWER FEEDPOWERFEED
POWER FEED
HOUSINGBREAK
HOUSINGBREAK
HOUSINGBREAK
HOUSINGBREAK
HOUSINGBREAK
HOUSINGBREAK
HOUSINGBREAK
HOUSINGBREAK
AOUTSIDE
BINSIDE
AOUTSIDE
BINSIDE
BINSIDE
BINSIDE
CCENTER
CCENTER
CCENTER
Shape Hexagon Triangle Square
Nominal Leg Length
A Outside B inside C Mounting A Outside B Inside C Mounting A Outside B Inside C Mounting
Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM
Standard Recessed (L36) housing sections and lens lengths:
For standard shapes and sizes, lens lengths will always be equal to side lengths of the shape. Listed below are the standard shapes in standard sizes. Shapes cannot be combined with linear lengths or other shapes if non-standard shapes and sizes are required.
11/2”
R
ef.
19/16”
1
23 4
5
6
Page 5 of 11 (Rev. 09/2020)
M36LED_Shapes_Recessed_v1.2[1C]
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Standard Recessed (L36R) housing sections and lens lengths:
For standard shapes and sizes, lens lengths will always be equal to side lengths of the shape. Listed below are the standard shapes in standard sizes. Shapes cannot be combined with linear lengths or other shapes if non-standard shapes and sizes are required.
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16” (1mm) tolerance.*For rectangle length and width dimensions, reference the square nominal size rows needed.
Page 6 of 11 (Rev. 09/2020)
M36LED_Shapes_Recessed_v1.2[1C]
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
1. 1/4”-20 Threaded rod to structure (supplied and installed by others).2. 1/4”-20 Coupler hardware (supplied and installed by others).3. 1” 1/4”-20 Stud (by Selux).4. Ø5/16” [Ø7mm] mounting hole.
Threaded Stud Mounting (TS)
Standard Recessed (L36R) housing sections and lens lengths:
For standard shapes and sizes, lens lengths will always be equal to side lengths of the shape. Listed below are the standard shapes in standard sizes. Shapes cannot be combined with linear lengths or other shapes if non-standard shapes and sizes are required.
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.*For rectangle length and width dimensions, reference the square nominal size rows needed.
Shape Hexagon Triangle Square
Nominal Leg Length
A Outside B inside C Mounting A Outside B Inside C Mounting A Outside B Inside C Mounting
Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
0-10V linear dimming (DIM)Luminaires supplied with drivers offering the capability of either normal switched operation of 0-10V dimming for linear dimming curve. Fixtures ship wired for dimming. For on/off functionality, simply cap the dimming leads. Minimum dimming level preset at factory to 1%. (Due to size constraints, 1’ side length luminaires are supplied with a driver from a different manufacturer than 2’ and above luminaires. For details, please consult factory).
0-10V logarithmic eldoLED EcoDrive (DIL)Luminaires supplied with drivers offering the capability of either normal switched operation of 0-10V dimming for logarithmic dimming curve. Fixtures shipped wired for dimming. For on/off functionality, simply cap the dimming leads. Minimum dimming level preset at factory to 1%.
eldoLED ECOdrive DALI dimming (DED)Luminaires supplied with ECOdrive DALI dimming driver with logarithmic dimming curve. Minimum dimming level preset at factory to 1%. For “dim to dark” (down to 0.1%), please consult factory.
eldoLED SOLOdrive 0-10V linear dimming (D01) Luminaires supplied with SOLOdrive 0-10V dimming driver with linear dimming curve. Minimum dimming level preset at factory to 0.1% and “dim to dark”.
eldoLED SOLOdrive 0-10V logarithmic dimming (DL01) Luminaires supplied with SOLOdrive 0-10V dimming driver with logarithmic dimming curve. Minimum dimming level preset at factory to 0.1% and “dim to dark”.
LUTRON 2-wire dimming (DC2)Luminaires supplied with Hi-Lume 2-wire dimming driver (120V only)programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%.
LUTRON EcoSystem dimming (DE1/DC5)Luminaires supplied with Hi-Lume EcoSystem (4 wire, digital link) dimming driver programmed for Constant Current Reduction (CCR). Minimum dimming level down to 1% (DE1) with SoftOn/FadeToBlack or 5% (DC5).
* For control recommendations, please contact driver manufacturer.
* For driver counts, please see page 8.
- The following wire(s) are in addition to the standard above -
Gray = (-) DALI or 0-10V Dimming ControlPurple = (+) DALI or 0-10V Dimming Control
Violet = “E1” Digital Link Dimming ControlViolet/White = “E2” Digital Link Dimming ControlDE1, DC5
0-10V linear (DIM) 0-10V logarithmic eldoLED Ecodrive (DIL)DALI logarithmic eldoLED ECOdrive (DED)0-10V linear eldoLED SOLOdrive (D01)0-10V logarithmic eldoLED SOLOdrive (DL01)
DIM, DIL, DED D01, DL01
Lutron EcoSystem (DE1)Lutron 5-Series (DC5)
Page 8 of 11 (Rev. 09/2020)
M36LED_Shapes_Recessed_v1.2[1C]
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Driver Counts for DIM, DIL, DED, D01, DL01 drivers
Driver TypeDIM, DIL, DED,
D01, DL01
Driver Current 1C20 1C25 1C30 1C35 1C40 1C45
Pattern Shape Pattern Size Total Length Driver Quantity
1’ 4’ 1* 1* 1* 1* 2* 2*
2’ 8’ 1 1 2 2 2 2
3’ 12’ 2 2 2 3 3 3
4’ 16’ 2 2 4 4 4 4
1’ 3’ 1* 1* 1* 1* 1* 1*
2’ 6’ 1 1 1 2 2 2
3’ 9’ 2 2 2 3 3 3
4’ 12’ 2 2 2 3 3 3
1’ 6’ 2* 2* 2* 2* 2* 2*
2’ 12’ 2 2 2 3 3 3
3’ 18’ 3 3 3 6 6 6
4’ 24’ 3 3 6 6 6 6
Driver Counts for DE1 driversDriver Type
DE1Driver Current 1C20 1C25 1C30 1C35 1C40 1C45
Pattern Shape Pattern Size Total Length Driver Quantity
1’ 4’ NA NA NA NA NA NA
2’ 8’ 2 2 2 2 2 2
3’ 12’ 2 2 2 3 3 3
4’ 16’ 4 4 4 4 4 4
1’ 3’ NA NA NA NA NA NA
2’ 6’ 1 1 1 3 3 3
3’ 9’ 2 2 3 3 3 3
4’ 12’ 2 2 2 3 3 3
1’ 6’ NA NA NA NA NA NA
2’ 12’ 2 2 2 3 3 3
3’ 18’ 6 6 6 6 6 6
4’ 24’ 6 6 6 6 6 6
Driver Counts for DC2 drivers
Driver TypeDC2
Driver Current 1C20 1C25 1C30 1C35 1C40 1C45
Pattern Shape Pattern Size Total Length Driver Quantity
1’ 4’ NA NA NA NA NA NA
2’ 8’ 2 2 2 2 2 4
3’ 12’ 2 3 3 3 3 4
4’ 16’ 2 4 4 4 4 6
1’ 3’ NA NA NA NA NA NA
2’ 6’ 2 2 2 2 2 2
3’ 9’ 3 3 3 3 3 3
4’ 12’ 2 3 3 3 3 4
1’ 6’ NA NA NA NA NA NA
2’ 12’ 2 3 3 3 3 4
3’ 18’ 3 6 6 6 6 6
4’ 24’ 4 6 6 6 6 8
* DIM drivers only
Page 9 of 11 (Rev. 09/2020)
M36LED_Shapes_Recessed_v1.2[1C]
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Fuse (FS) - Luminaires supplied with an in-line fuse located on the hot wire for each feed. (Supplied with an 8A slow burn fuse).
Damp Location (DL) - Luminaires are suitable for use in damp location(s). Examples of such locations include protected areas under canopies, marquees, roofed porches, and similar locations where the fixture(s) are protected from direct contact with rain, snow, or excessive moisture (such as ocean spray). Interior locations include areas subject to moderate degrees of moisture, such as basements and certain barns and cold storage buildings.
90° Elbow on top of the housing (7/8" feed hole)
3/8" flexible metal conduit (6' long)
6" leads
Straight fitting
Flex Whip - Standard Joiner System - Standard for multi-piece housing
Fixture extrusion
Joiner extrusion
Recommended #2 Phillips drive
Fixture extrusion
Additional view
Housing Breaks and Lens Lengths
LENS
LENSLENS
For standard shapes and sizes, lens lengths will always be equal to side lengths of the shape. These standard shapes are standalone and cannot be combined with any other shapes or lengths. For non-standard sizes, shapes or configurations and patterns please consult factory.
Page 10 of 11 (Rev. 09/2020)
M36LED_Shapes_Recessed_v1.2[1C]
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
![Page 1: M36 Shapes LED Recessed [L36/L36R] selux · Sizes and shapes other . than those indicated are available to meet your project needs. Please consult factory with your requirements.](https://reader033.documents.pub/reader033/viewer/2022050510/5f9b44f1c75bdc0d35608d21/html5/thumbnails/1.jpg)
![Page 2: M36 Shapes LED Recessed [L36/L36R] selux · Sizes and shapes other . than those indicated are available to meet your project needs. Please consult factory with your requirements.](https://reader033.documents.pub/reader033/viewer/2022050510/5f9b44f1c75bdc0d35608d21/html5/thumbnails/2.jpg)
![Page 3: M36 Shapes LED Recessed [L36/L36R] selux · Sizes and shapes other . than those indicated are available to meet your project needs. Please consult factory with your requirements.](https://reader033.documents.pub/reader033/viewer/2022050510/5f9b44f1c75bdc0d35608d21/html5/thumbnails/3.jpg)
![Page 4: M36 Shapes LED Recessed [L36/L36R] selux · Sizes and shapes other . than those indicated are available to meet your project needs. Please consult factory with your requirements.](https://reader033.documents.pub/reader033/viewer/2022050510/5f9b44f1c75bdc0d35608d21/html5/thumbnails/4.jpg)
![Page 5: M36 Shapes LED Recessed [L36/L36R] selux · Sizes and shapes other . than those indicated are available to meet your project needs. Please consult factory with your requirements.](https://reader033.documents.pub/reader033/viewer/2022050510/5f9b44f1c75bdc0d35608d21/html5/thumbnails/5.jpg)
![Page 6: M36 Shapes LED Recessed [L36/L36R] selux · Sizes and shapes other . than those indicated are available to meet your project needs. Please consult factory with your requirements.](https://reader033.documents.pub/reader033/viewer/2022050510/5f9b44f1c75bdc0d35608d21/html5/thumbnails/6.jpg)
![Page 7: M36 Shapes LED Recessed [L36/L36R] selux · Sizes and shapes other . than those indicated are available to meet your project needs. Please consult factory with your requirements.](https://reader033.documents.pub/reader033/viewer/2022050510/5f9b44f1c75bdc0d35608d21/html5/thumbnails/7.jpg)
![Page 8: M36 Shapes LED Recessed [L36/L36R] selux · Sizes and shapes other . than those indicated are available to meet your project needs. Please consult factory with your requirements.](https://reader033.documents.pub/reader033/viewer/2022050510/5f9b44f1c75bdc0d35608d21/html5/thumbnails/8.jpg)
![Page 9: M36 Shapes LED Recessed [L36/L36R] selux · Sizes and shapes other . than those indicated are available to meet your project needs. Please consult factory with your requirements.](https://reader033.documents.pub/reader033/viewer/2022050510/5f9b44f1c75bdc0d35608d21/html5/thumbnails/9.jpg)
![Page 10: M36 Shapes LED Recessed [L36/L36R] selux · Sizes and shapes other . than those indicated are available to meet your project needs. Please consult factory with your requirements.](https://reader033.documents.pub/reader033/viewer/2022050510/5f9b44f1c75bdc0d35608d21/html5/thumbnails/10.jpg)
![Page 11: M36 Shapes LED Recessed [L36/L36R] selux · Sizes and shapes other . than those indicated are available to meet your project needs. Please consult factory with your requirements.](https://reader033.documents.pub/reader033/viewer/2022050510/5f9b44f1c75bdc0d35608d21/html5/thumbnails/11.jpg)
![Quadro 1 LED [QD1L] selux](https://static.documents.pub/doc/80x56/624f5a1829d0a64d9e60217e/quadro-1-led-qd1l-selux.jpg)
![Purelight LED Round [PL9LR] selux · mounting (wall or ceiling). ... LEDs create a high efficiency LED light engine ... M5 x 12 Screw and lock washer (by Selux)](https://static.documents.pub/doc/80x56/5acba7967f8b9a27628b9016/purelight-led-round-pl9lr-wall-or-ceiling-leds-create-a-high-efficiency.jpg)
![MTR Square SteelCore Bollard [SCBSMFL] selux](https://static.documents.pub/doc/80x56/62511d3f1e1ffe0f1b157ac4/mtr-square-steelcore-bollard-scbsmfl-selux.jpg)
![Facade Module [FM] selux · Selux Corporation 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, Fixture Housing – Die-cast low-copper aluminum fixture body and tempered glass](https://static.documents.pub/doc/80x56/5c0947ab09d3f264268b6f2e/facade-module-fm-selux-corporation-2018-t-845-834-1400-800-735-8927-f-845-834-1401.jpg)
![M36 My White LED Direct [L36-TW] selux · LED Direct Light Engine ... LED Optimized white lens MI Clear Lens w/microprism NB LMO Symmetric A2 LMO Asymmetric 20° Wall Washer BW LMO](https://static.documents.pub/doc/80x56/5acba7967f8b9a27628b8fed/m36-my-white-led-direct-l36-tw-direct-light-engine-led-optimized-white-lens.jpg)
![M100 Shapes LED Direct [L10] selux · For standard shapes and sizes, lens lengths will always be equal to side lengths of the shape. Listed below are the nominal lengths and details](https://static.documents.pub/doc/80x56/5f08bc987e708231d4237954/m100-shapes-led-direct-l10-selux-for-standard-shapes-and-sizes-lens-lengths-will.jpg)
![M36 LED Regressed [L36J/L36JR1/L36JR2] selux](https://static.documents.pub/doc/80x56/61e088d582e45244d411b027/m36-led-regressed-l36jl36jr1l36jr2-selux.jpg)
![M36 MRC Wall Washer LED Recessed [L36/L36R1/L36R2] selux](https://static.documents.pub/doc/80x56/61e088d582e45244d411b025/m36-mrc-wall-washer-led-recessed-l36l36r1l36r2-selux.jpg)
