Mac

Do

n Self-Pro

PelleD W

inD

roW

erS an

D H

eaD

erS

Put your harvesting on fast-forward.

MacDon owners are talking… read and watch what they are saying by visiting Producers Corner and MacDon TV at macdon.com.

WHen it coMeS to getting your croP off, SPeeD iS everytHing. anD SPeeD iS exactly WHat MacDon’S engineerS SougHt to acHieve WHen tHey Set out to create tHe WorlD’S next generation of HarveSting equiPMent. tHat’S becauSe faSter HarveSting not only MeanS leSS tiMe anD StreSS in tHe fielD, but can alSo Mean loWer fuel, labor anD Maintenance coStS. So DiD our engineerS SucceeD? you bet tHey DiD! froM tHe croP HanDling oPtiMization on a40 SerieS augerS, WHicH Deliver uP to 25% More caPacity tHan our PreviouS bencHMarkS, to our truly revolutionary M SerieS SP WinDroWerS tHat feature nuMerouS PatentS anD tHe ability to travel at HigHWay SPeeDS uP to 23 MPH (37 km/h), every MacHine in tHiS brocHure boaStS a Significant ProDuctivity increaSe over our PreviouS generation ProDuct. So We invite you to take a MoMent to exPlore tHe Many exciting aDvanceS in HarveSting in tHe PageS tHat folloW. tHe little tiMe you take toDay May Save you Significant tiMe DoWn tHe roaD.

M Series SP Windrower tractors 4 r Series rotary Disc Mower conditioners 10

a Series auger Headers 12 | D Series Draper Headers 16 Draper Headers for combines 20 | Performance options 21

Speed is everything.

Self-ProPelleD WinDroWing M SerieS WinDroWer TraCTorS

to acHieve revolutionary

SPeeD We StarteD WitH a revolutionary

iDeaIntroducIng Macdon’s

all-new M serIes sP wIndrower tractors wIth dual dIrectIon

technology

4

™

Don’t blink, you MigHt MiSS tHeM. WitH a toP HigHWay SPeeD of 23 MPH (37 km/h), MacDon’S neW SuPer-faSt M SerieS SP WinDroWerS Set a neW bencHMark for SP WinDroWer DeSign, ProDuctivity anD PerforMance. tHey feature MacDon’S PatenteD Dual Direction™ tecHnology (M200, M150), WHicH alloWS tHe oPerator to eaSily rotate tHe oPerator’S Station froM a cab forWarD PoSition for cutting, to an engine forWarD PoSition for faSter, More Stable, HigHWay travel. you’ll enjoy faSter cutting, faSter travel betWeen fielDS anD, beSt of all, be HoMe faSter tHan ever before.

ae50 aWarD Winner 5

our Most Powerful tractors everM Series tractors are equipped with

powerful diesel engines which have

been specially engineered with torque

characteristics for MacDon’s header

requirements. these robust tier-3

engines feature charge-air-cooling,

which boosts power while reducing

emissions to tier-3 regulations, plus

full-authority electronics that delivers

power boost on demand. all engines

feature state-of-the-art technology

for improved fuel economy.

excePtIonal croP clearancethe M Series frame features

a wide wheel stance and an

unobstructed, unmatched

45" (1160 mm) below frame

clearance when cutting

bushy crops. M200 and

M150 also feature a new

hydraulic header drive with

load-sensing circuits that

delivers power on demand

to all header functions.

See back cover for DetailS

6

wIth harvest Manager Pro you’re In controlM Series tractors come with a fully computerized

monitoring and header control system that provides the

operator with real time readout of the header’s cutting

performance. operators will also enjoy easy, intuitive

fingertip control of all header functions on-the-fly. the

instrumentation and monitor system for the M200 and

M150 include: 2 line display, 24 characters per line,

multi-function computerized monitoring and header

control, selectable display, complete onboard diagnostics

displayed in plain text, read-out of ground and engine

speed. reference numbers to determine header height,

angle and flotation. System read-out for knife, disc,

draper and auger speeds (read-out depends on header

selection and header drive). load gauge standard on

M200, optional on M150. the M100 has some of the

same monitor read-out display functions.

tHe M200 SP WinDroWer iS a revolutionary MacHine.”davId shoeMaker owner of a M200 sP windrower with a r80 rotary disc

“

7all new oPerator statIon and cabMacDon’s completely

redesigned cab and operator

station offers more room

and comfort for the

operator. its cab forward

design and curved glass

provide unparalleled

visibility in all directions.

faster In the fIeld, faster between fIelds, faster hoMeMacDon’s patented Dual Direction™ technology (models

M200 and M150) allows the operator to switch to

highway travel mode in seconds and travel at highway

speeds of up to 23 MPH (37 km/h). better still, there is

no need to detach the header and transport it via

flatbed, saving you even more time and labor when

moving from field to field. (limitations may occur

due to road width restrictions with larger headers.)

Switching from field to highway mode takes only 3 seconds with MacDon’s Dual Direction™ technology. (available on M200 and M150.)

3 SecondS

➔33% Bigger

Patented Movable sIde raIl PlatforMall regular engine and hydraulic maintenance points are

within easy reach thanks to MacDon’s patented movable

rail platform. M200 and M150 models have platforms

on both sides of the tractor, while M100 models have

a platform on the driver’s side only.

easy unPluggIng froM the caban optional feature on M200 and M150 tractors,

MacDon’s Hydraulic Header reverser allows the

operator to quickly unplug the conditioner and

other major header components on augers and

drapers without leaving the operator’s station.

easy access coolIng systeMDesigned for

quick servicing,

the cooling system’s

cores are easily

slid or swung out

for fast cleaning.

8

9tIre oPtIon Packages

M serIes wIndrower tractors sPecIfIcatIonsModel M200 M150 M100

engine caterpillar, 6.6 l, (403 cu. in.), 6 cylinder, turbo cummins, 4.5 l (275 cu. in.), 4 cylinder, turbo cummins, 3.3 l (199 cu. in.), 4 cylinder, turbo

Horsepower rated 213 HP (158 kW) @ 2,200 rPM (gross), peak power boost 220 HP (160 kW) @ 2,000 rPM

rated 130 HP (97 kW) @ 2,200 rPM (gross), peak 140 HP (104 kW) @ 2,000 rPM

rated 99 HP (74 kW) @ 2,600 rPM (gross)

Weight 4 9,553 lb. (4323 kg) 9,493 lb. (4296 kg) 8,800 lb. (4000 kg)

batteries/alternator 2, 12-volt/135 aMP 2, 12-volt/130 aMP 1, 12-volt/120 aMP

fuel tank 97 u.S. gal. (378 l)

front tread Width 134.25 in. (3410 mm)

rear tread Width adjustable 5 position from 93.2 in. (2367 mm) to 135.8 in. (3448 mm) fixed position, 130.7 in. (3320 mm)

Wheel base 158.3 in. (4020 mm)

crop clearance 45.7 in. (1160 mm)

Drive Wheels 18.4 x 26 bar or turf, 23.1 x 26 turf, 600-65 r28 bar-tread

tail Wheels 7.5 - 16 Sl or 10 x 16 formed casters, 10 x 16 or 16.5l - 16.1 forked casters

transmission Hydrostatic, 3-speed electric shift motors Hydrostatic, 2-speed electric shift motors Hydrostatic, 2-speed electric shift motors

final Drive Planetary gear reduction

cab equipment Dual Direction™ operator station, deluxe multi-adjustable air ride seat, fold-away trainer seat, windshield wipers, air conditioner/heater, tilt steering

Multi-adjustable deluxe flotation seat, windshield wiper, air conditioner/heater, tilt steering

instrumentation and Monitor System

Harvest Manager Pro: ground speed, engine speed, header height, header angle, header float, knife SPM or disc rPM, reel speed, conveyor speed, header drive load gauge (standard on M200, optional on M150)

Harvest Manager: ground speed, engine speed, header height, conveyor speed, optional header angle, optional knife SPM or disc rPM, optional reel speed

options booster springs, windshield shades (front and rear), weight box for towing header (required), auxiliary lift valve, reverser valve and plumbing (M150 and M200), valve for driving disc header (M150), double windrow attachment (M150 and M200), training seat and anti-shimmy kit for rear casters (standard on M150/M200, optional on M100)

4 M150/M200 add 1,150 lb. (522 kg) for tire package, M100 add 800 lb. (363 kg) for tire package

tractor/header coMPatIbIlItyheader 1 M100 M150 M200

r80 rotary Disc n 2 n

a40-D auger n n n

a40-D auger grass Seed n n n

a30-D auger n n n

D60 Draper n 3 n n

D50 Draper n n n

1 booster spring kits may be required to float heavier headers equipped with options 2 on 13' (4 m) size only 3 up to 35' (10.6 m) size

18.4 x 26 bar-tread

10 x 16 formed

18.4 x 26 turf-tread

7.5 - 16 Sl formed

23.1 x 26 turf-tread

10 x 16 forked

600-65 r28 bar-tread

16.5l - 16.1 forked

rotary DiSc WinDroWing r SerieS roTary DiSC MoWer ConDiTionerS10

So faSt, So reliable,

So MacDon

features | hydraulically driven header with high capacity, high efficiency bent axis pump and motor | lower daily

and annual maintenance requirements due to fewer moving parts than some competitive disc mowers |

Improved header float with primary draw bolt spring adjustment and fine-tune hydraulic adjustment on-the-go |

heat treated cutting and wear components | separate replaceable guards to protect cutterbar between discs |

sizes | 13 ft. (4 m), 16 ft. (4.9 m) | specifications page 22

11r SerieS roTary DiSC MoWer ConDiTionerS

notHing beatS tHe HarveSting SPeeD of a rotary DiSc MoWer, notHing excePt a rotary DiSc MoWer tHat HaS been excluSively engineereD for tHe HigH PerforMance StanDarDS of MacDon’S M SerieS WinDroWing tractorS.

Meet the MacDon r80 rotary Disc Mower

conditioner – a machine engineered to provide

producers with the ultimate in speed and

dependable cutting performance, especially in

tough, heavy or wet crop conditions. like all

MacDon machines, the r80 has been built to be

extremely robust and reliable so that you can

depend on it to power through thick and tangled

crop, anthills and gopher mounds – just about

anything that gets in your way. it also features

an all hydraulic high capacity drive system with

overload protection for header components.

owners will also benefit from low daily and annual

maintenance. other features include extra long

conditioner rolls with MacDon’s exclusive n-bar

roll design. these rolls allow for more aggressive

feeding and reduce the amount of side feeding

required. they also provide more control over

the conditioning action, allowing you to select

a range of settings from crush to crimp.

the r80 is also available in a pull-type model which features an exclusive aPt (articulating Power turn) hitch design that attaches quickly and delivers optimum maneuverability while minimizing the side loads put on the back of the tractor. compact turning radius allows you to open up a field in as little as two passes.

MacDon’s package for high speed grass seed harvesting features the M200 windrowing tractor with the 16' (4.9 m) r80.

ae50 aWarD Winner See back cover for DetailS

auger WinDroWing a SerieS auger HeaDerS12

a giant SteP forWarD in SPeeD,

reliability anD croP HanDling

features | on-the-go hydraulic reversing capability of reel, sickle, auger and conditioner allows the operator to be in full

control of all aspects of hay and forage harvesting from the operator’s seat (requires valve on sP tractor) | cam-forward

reel tine control reduces loading on bearings and cam-track for quieter operation and longer life | Independent speed control

allows adjustment to crop flow and windrow formation on-the-fly | highly durable poly auger pans for improved crop

flow and reduced dirt build-up and rock damage | n-bar non-contact steel conditioner rolls for optimum conditioning

action | optional double windrower attachment | sizes | 14 ft. (4.3 m), 16 ft. (4.9 m), 18 ft. (5.5 m) |

specifications page 22

13a SerieS auger HeaDerS

MacDon DraMatically raiSeS tHe bar once again in auger WinDroWing WitH itS coMPletely reDeSigneD a SerieS auger HeaDerS. So extenSively Have tHeSe augerS been reengineereD tHat literally every contact Point WitH tHe croP HaS been tWeakeD or MoDifieD WitH tHe goal of Delivering oPtiMuM PerforMance unDer a WiDe range of conDitionS.

completely redesigned to provide even better crimp or crush conditioning action, MacDon’s exclusive n-bar non-contact steel conditioner rolls are extra wide to match the increased capacities of a Series augers.

the result? How about up to 25% more capacity

than previous MacDon benchmarks? beyond

more capacity, a Series auger Headers also

feature MacDon’s advanced, fully-hydraulic

design with on-the-go hydraulic reversing

capability of reel, sickle, auger and conditioner

on the a40-D and a40-D grass Seed models.

this allows the operator to be in full control of all

harvesting adjustments from the comfort of the

operator’s seat – a real time saver when moving

from field to field or adjusting to changing

crop conditions.

14a serIes augers are avaIlable

In three Models:

a40-d | a full-featured double-knife drive unit designed to provide optimum performance under tough crop and

terrain conditions | a30-d | a robust and dependable double-knife drive unit suitable for most high acreage commercial operations | a40-d grass seed | a model specially configured with all the bells and whistles for

grass seed harvesting

the a40-D’s independent speed control allows adjustment to crop flow and windrow formation on-the-fly from the comfort of the operator’s seat.

Macdon’s a40-d grass seedMacDon’s a40-D grass Seed model

features all of the bells and whistles

you need for exceptional grass seed

harvesting. features include independent

speed control of auger, reel and sickle

permitting precise on-the-go adjustments

to crop conditions and windrow

formation. you also get a 7 bat reel,

special stub guards, an adjustable

windrow opening with forming rods

and manual or optional on-the-go

hydraulic guard angle adjustment for

quick and easy switching between

short and long stubble lengths.

15

MacDon a Series augers are also available in pull-type models for hay and forage harvesting. features include adjustable conditioning, a new heavy-duty cutterbar design and a beefed up, easier to attach hitch.

MacDon’s package for high speed grass seed harvesting features the M150 windrowing tractor with the 16' (4.9 m) a40-D grass Seed Header.

MacDon’s exclusive aPt (articulating Power turn) hitch design attaches quickly and delivers optimum maneuverability while minimizing the side loads put on the back of the tractor. compact turning radius allows you to open up a field in as little as two passes.

We are gaining 30% in overall ProDuctivity anD We Probably PickeD ourSelveS uP a couPle DayS a MontH.”brad schnoor owner of four Macdon M150 sP windrowers with a40-d auger headers

“

DraPer WinDroWing D SerieS DraPer HeaDerS16

Do it all, Do it better,

Do it Sooner

features | extra large 76.7" (1948 mm) windrow opening coupled with a step back design on the rear header panel

allows for more volume of tall bushy crops resulting in improved crop flow and windrow formation | Pr15 pick-up

reel which features Macdon’s flip-over finger action and cam-leading finger control | hydraulic knife drive for

maximum power transfer and increased ground speed in most conditions | Mechanical and hydraulic deck shift (center or end delivery on d60, center only on d50) |

single (d50/d60) or single split span (d60) length reels | d60 sizes | 15 ft. (4.6 m), 20 ft. (6.1 m), 25 ft. (7.6 m),

30 ft. (9.1 m), 35 ft. (10.6 m), 40 ft. (12.2 m) | d50 sizes | 30 ft. (9.1 m), 35 ft. (10.6 m) |

specifications page 23

17D SerieS DraPer HeaDerS

a Significant leaP forWarD in DraPer HeaDer tecHnology, MacDon D SerieS DraPerS offer uP to 40% More WinDroWing caPacity tHan tHe PreviouS inDuStry leaDing bencHMarkS Set by MacDon’S 972 HarveSt HeaDer®. for MoSt oPeratorS, unDer MoSt conDitionS, tHat rePreSentS a DraMatic reDuction in overall HarveSting tiMe.

better still, D Series drapers are true multi-crop

harvesting solutions letting you cut just about

any crop without having to swap headers. not

only are they perfect for harvesting cereals,

oil seeds, grass seeds and edible beans, but

they will also outperform most auger headers

in hay and forage applications. if you are

looking for the ultimate combination of swath

formation and productivity, you can’t do better

than MacDon’s D Series Draper Headers for

your operation.

MacDon’s completely redesigned draper system features larger capacity motors and heavy duty double row sealed roller bearings for increased power and reduced maintenance. MacDon’s puncture and tear resistant v-guide drapers are designed for positive tracking. on the D60 model, the double v-guide draper (shown) can be reversed if the leading edge becomes damaged or worn, effectively doubling draper life. combined with MacDon’s draper protecting c-shaped cutterbar, these features make them MacDon’s most durable and reliable drapers ever.

18

MacDon’s unique c-shaped cutterbar, which permits cutting at ground level for the most consistently clean shave of your fields. this close cutting ability combined with the reel’s ability to maintain a consistent relationship with the sickle (allowing it to gently lift the crop like a comb) means improved recovery in crop that is downed, lodged or tangled.

boost your ProductIvIty Instantly wIth d serIes draPer headersDesigned to be excellent all-purpose headers for cereals,

canola, hay, forage and specialty crops, MacDon’s D Series

drapers allow you to cut at significantly higher speeds and

achieve greater capacity than previous drapers, while still

delivering exceptionally uniform and fluffy windrows.

this is possible thanks to their extra-wide 76.7" (1948 mm)

swath opening, increased draper depth, better angling

on the back sheet and the higher crop clearance of the

M Series tractor. D Series drapers are available in two

models – the center delivery single knife D50, which comes

with a 5 bat Pr15 pick-up reel and is perfect for most

harvesting situations, and the super-robust full-featured

D60 which is designed for high volume commercial

operations. both models feature MacDon’s patented

c-shaped cutterbar and long-life double v-guide drapers.

MacDon owners are talking…read and watch what they are saying by visiting Producers Corner and MacDon TV at macdon.com.

excellent for Hay and ForageWith the addition of MacDon’s Hc10 Hay conditioner, D60 headers become high performance hay and forage harvesting machines. if you’re cutting for one of today’s large forage harvesters, MacDon’s optional double windrow attachment (available for double knife units) lets you lay up to 60' of conditioned crop in a single windrow.

19

because reel speed, draper speed and reel position can all be finely adjusted, the D60 also makes a superb header for the harvesting of grass seed.

Macdon’s d60 – the ultIMate In draPer harvestIng PerforManceavailable in single and double knife versions, MacDon’s

full-featured D60 model is designed for high acreage

operations and is outfitted with heavier duty drapers, shiftable

decks (that allow center or side delivery) and the ability to

attach MacDon’s Hc10 Hay conditioner (available for double

knife drives up to 30'/9.1 m). for hay and forage harvesting,

MacDon’s optional double windrow attachment (available for

double knife version headers only) allows you to lay up to

60' of conditioned crop in a single windrow, ideal for today’s

larger forage harvesters. you can also specify either a 5 or

6 bat Pr15 pick-up reel, both of which have been specially

engineered to maintain a consistently close cutterbar to

reel relationship over the entire length of the header as

well as provide more effective lift and sweep of material

from the cutterbar. as such, you’ll experience better cutting

performance, especially in tough harvesting conditions

such as downed or tangled crops. for more control, the

D60 comes standard with hydraulic fore-aft reel positioner

and can be outfitted with performance options such as

hydraulic header tilt for the ultimate harvesting package.

Mt8 header transPorterthe MacDon Mt8 transporter has been specifically engineered

for the secure transportation of your MacDon D and fD Series

headers (including the ca20 combine adapter) at normal

highway speeds behind your combine, MacDon SP windrower

or truck. the innovatively designed offset main

frame allows the user to conveniently

remove a header’s hay conditioner

or combine adapter while

still positioned on

the transporter.

your Macdon sP draPer header can also be used on your coMbIneWith the addition of MacDon’s ca20 combine adapter,

MacDon D Series headers can be mounted on most current

model combines. they have become the header of choice for

many custom cutters and high acreage producers because

of their ability to deliver the same dramatic productivity and

performance boosts as they do when used for SP windrowing.

the ca20 combine adapter itself, does more than just attach

the header to the combine, it also provides exceptional lateral

and vertical flotation as well as enhanced crop feeding

characteristics. for

more information

please refer to

MacDon’s Flex

and Rigid Draper

Headers for

Combines

brochure.

DraPer HeaDerS For CoMbineS20 ae50 aWarD Winner See back cover for DetailS

ca20 combine adapter

available for combine application only, Macdon’s ae50 award winning fd70 flexdraper® can significantly boost your combine’s productivity, especially in low podding crops such as soybeans, edible beans and lentils.

go to macdon.com for more details on the Mt8 Header transporter.

MaCDon HeaDer PerForManCe enHanCeMenT oPTionSdouble wIndrow attachMentfor auger, rotary and Draper

Series headers, MacDon’s

optional double windrow

attachment feature lets you lay

up to 60' (18.2 m) of crop in a

single windrow. this is ideal for

today’s large forage harvesters,

and can translate into significant

time and fuel savings for producers

who employ this feature.

note: When mounting to D Series headers Hc10 conditioner is required.

hay condItIonerMacDon’s optional Hc10 Hay

conditioner for draper headers,

available for double knife drives

up to 30' (9.1 m), turns a D Series

header into a high performance

hay and forage harvester.

Spring Loaded Stabilizer WheelsSpring-loaded wheels help cushion the ends of draper headers when moving over field obstacles. optional for 30' and larger D Series and the FD70.

upper Cross augerattached in front of the back tube, the upper cross auger improves feeding of crop to the center in heavy crop conditions. ideal for high volume harvesting of forages, oats, canola, mustard and other tall, hard to feed crops. Optional for D Series and the FD70.

Hydraulic Fore-aft reel Positioneradjust the reel position to changing crop and field conditions on-the-go from the cab. Optional for D50. Standard for D60 and the FD70.

gauge rollersattached behind the cutterbar to reduce wear on the cutterbar wear plate and improve the movement of the header over uneven terrain, as well as in sand or firm soil conditions. Optional for A and 16' R Series.

Skid Shoesimproves the placement of the cutterbar in relation to the ground, thereby reducing wear on the cutterbar and enhancing the in-field performance of the header. Optional for some A, D models and the 16' R Series.

Stub guardsStub guards mount directly to the cutterbar to improve cutting performance in tough, stringy grass type crops, and crops that need to be cut close to the ground (such as grass seed and edible beans). Optional for A and D Series. Not available for all sizes

Stabilizer Wheels with Slow Speed Transportcushions and guides the ends of the header on larger draper headers, plus enables transportation at slower road speeds of 30' and larger headers. For D Series and the FD70.

for detaIls on these and other oPtIons vIsIt WWW.MaCDon.CoM or see your Macdon dealer.

MT8 Header Transporterfor high speed transport of draper headers between fields, this quick and easy-to-use system allows you to tow the header behind your MacDon SP tractor, truck or combine for traveling on public roads. Optional for D Series and the FD70.

Poly Skidsfor muddy harvesting conditions, or crops like soybeans, rice, lentils and edible beans poly skids permit smoother traveling of the cutterbar over the ground, and reduces the likelihood of mud building up on the cutterbar. optional for some D Series. Standard for the FD70.

Hydraulic Header Tiltadjust header and guard angles on-the-go from the cab, enabling you to get the knife and guards closer to the ground for recovery of downed crops and improved performance in crops such as peas, lentils, edible beans and soybeans. optional for A, D and R Series.

21

note: fD70 flexDraper® headers are available for combine application only.

22r80 rotary dIsc/r80 grass seed rotary dIsc sPecIfIcatIons (see page 10)

Size/Weight 13 ft. (4 m)/3,700 lb. (1679 kg) 16 ft. (4.9 m)/4,600 lb. (2087 kg)

Drive (Maximum Hydraulic Power) 130 HP (97 kW) 195 HP (146 kW)

cutting Speed/knife tip Speed 1,800 to 2,600 rPM/131 MPH (210.8 km/h) to 189 MPH (304 km/h)

cutting angle range 0-8˚ below horizontal

number of cutting Discs/blades 8/2 10/2

Hay conditioner: roll type/roll length/roll Diameter intermeshing steel n-bars/118 in. (3000 mm)/9.17 in. (233 mm) outside diameter on 6.63 in. (168.4 mm) o.D. tube

gear train Protection Shearable disc spindles

options tall crop divider, gauge roller and adjustable skid shoes (only available for 16 ft./4.9 m model), shoe lift kit, tall crop feed plate, double windrow attachment (can not be used on grass seed header), tall crop transition shield (used on grass seed disc)

the r80 grass Seed Disc is available in the 16 ft. (4.9 m) size only. Specifications are the same as above with the following adjustments: 1) Weight is reduced by 400 lb. (182 kg) as no conditioner is required; 2) Self-propelled grass Seed completion kit and windrow forming rods are required.

a40-d auger header sPecIfIcatIons (see page 12)

Size/Weight 14 ft. (4.3 m)/4,868 lb. (2209 kg) 16 ft. (4.9 m)/5,058 lb. (2295 kg) 18 ft. (5.5 m)/5,248 lb. (2381 kg)

Sickle: type/Drive/Speed/Stroke/guards/Sickle Sections Double knife/Hydraulic, dual MacDon wobble boxes/variable 1,450 to 1,900 SPM/3 in. (76 mm)/Pointed DHt (double heat-treated)/3 in. (76 mm) over-serrated, bolt-on

reel: type/Drive/Speed (optional sprockets)/fingers 6 bat, oval closed bats with end caps, sectioned bar with greaseable ball bearings/Hydraulic, motor to enclosed gearbox/ variable from cab 51 to 85 rPM/Steel

conveyor (auger): type/Drive/Speed (optional sprockets)/Delivery Width

20 in. (508 mm) undershot, center-feed auger over replaceable high density polyethylene auger pans, rubber feed fingers/Hydraulic, direct mounted motor/variable 230 to 320 rPM/95.7 in (2430 mm)

conditioner: type/roll length/outside Dimension/ Drive/Speed

non-contact steel n-bar intermeshing crimping rolls, header mounted rolls and forming shields/ 102 in. (2590 mm)/9.17 in. (233 mm)/Hydraulic motor to enclosed gearbox/variable 601 to 790 rPM

a40-d grass seed auger header sPecIfIcatIons (see page 15)

Size/Weight 14 ft. (4.3 m)/4,068 lb. (1846 kg) 16 ft. (4.9 m)/4,258 lb. (1932 kg)

Sickle: type/Drive/Speed/Stroke/guards/Sickle Sections Double knife/Hydraulic, dual MacDon wobble boxes/variable 1,450 to 1,900 SPM/3 in. (76 mm)/Pointed DHt (double heat-treated)/3 in. (76 mm) stub guards

reel: type/Drive/Speed (optional sprockets)/fingers 7 bat, oval closed bats with end caps, sectioned bar with greaseable ball bearings/Hydraulic, motor to enclosed gearbox/ variable from cab 51 to 85 rPM/Steel

conveyor (auger): type/Drive/Speed (optional sprockets)/Delivery Width

20 in. (508 mm) undershot, center-feed auger over replaceable high density polyethylene auger pans, rubber feed fingers/Hydraulic, direct mounted motor/variable 230 to 320 rPM/95.7 in (2430 mm)

a30-d auger header sPecIfIcatIons (see page 12)

Size/Weight 16 ft. (4.9 m)/4,977 lb. (2258 kg) 18 ft. (5.5 m)/5,164 lb. (2343 kg)

conveyor (auger): type/Drive/Speed 20 in. (508 mm) undershot, center-feed auger over replaceable high density polyethylene auger pans plus enhanced feeding with rubber feed fingers/ Mechanical two “b” belts/282 rPM, 22t sprocket

Sickle: Drive/Speed MacDon design enclosed oil wobble box/1,450 SPM (loaded)

reel: type/Drive/Speed 5 bat, oval closed bats with steel finger/Mechanical two “b” belts from auger/ 72 rPM/Steel (optional sprockets) to slow down reel

adjustable Swath/Windrow Shields 36 in. to 100 in. (915 mm to 2540 mm)/adjustable

conditioner: type/roll length/outside Dimension/ Drive/Speed

non-contact steel n-bar intermeshing crimping rolls, header mounted rolls and forming shields/102 in. (2590 mm)/9.17 in. (233 mm)/Hydraulic, motor to enclosed gearbox/variable 601 to 790 rPM

a serIes auger header oPtIonstall crop divider, stub guards (standard on grass seed header), additional skid shoes, gauge rollers, hydraulic angle header kit (check with dealer for tractor specifications required), double windrow attachment (can not be used on grass seed header)

23

Please consult your dealer for field installed options. for the latest up-to-date features and specification changes, consult www.macdon.com for details.

d60 serIes draPer header sPecIfIcatIons (see page 16)

Size/Weight 1 15 ft. (4.6 m)/ 2,780 lb. (1258 kg)

20 ft. (6.1 m)/ 3,265 lb. (1484 kg)

25 ft. (7.6 m)/ 3,872 lb. (1753 kg)

30 ft. (9.1 m)/ 4,812 lb. (2178 kg)

35 ft. (10.6 m)/ 5,337 lb. (2480 kg)

40 ft. (12.2 m)/ 5,704 lb. (2593 kg)

Sickle: type/Drive/Speed Single or double knife (depending on size and application)/Hydraulic, MacDon design enclosed oil bath wobble box(es)/varies depending on header size, faster sickle speed on smaller headers

Speeds Single knife windrower 1,300 to 1,500 SPM, double knife windrower 1,500 to 1,900 SPM Single knife combine 1,350 to 1,450 SPM, double knife combine 1,500 to 1,700 SPM

guards Pointed DHt (double heat-treated), pointed cH (case-hardened), stub SM (sheet metal hold-down, forged bottom guard), stub f (forged top and bottom)

reel: type/Drive/Speed/fingers Model Pr15 pick-up reel, 5 or 6 bat, 2 piece (split) or single span, flip-over design, cam-leading finger control/Hydraulic/SP windrower 0 to 62 rPM, combine 0 to 67 rPM (varies depending on combine model)/Wear-resistant plastic, 6 in. (152 mm) spacing, 11 in. (279 mm) length

conveyor: type/Drive/ Speed/Delivery

41.6 in. (1057 mm) wide rubber skim-coated drapers, double reversible v-guide tracking, integral seal on leading edge/Hydraulic/SP windrower 0 to 742 fPM, combine 0 to 464 fPM/Mechanical or hydraulic deck shift (SP windrower only), opening width 60.6 in. (1539 mm) to 76.7 in. (1948 mm)

1 Weight based on double knife configuration. for combine application add approximately 2,000 lb. (905 kg) for combine adapter.

d50 serIes draPer header sPecIfIcatIons (see page 16)

Size/Weight 2 30 ft. (9.1 m)/ 3,913 lb. (1779 kg)

35 ft. (10.6 m)/ 4,394 lb. (1997 kg)

Sickle: type/Drive Single/Hydraulic, MacDon design enclosed oil bath wobble box

Speeds Single knife windrower 1,300 to 1,500 SPM Single knife combine 1,350 to 1,450 SPM

guards Pointed cH (case-hardened)

reel: type/Drive/ Speed/fingers

Model Pr15 pick-up reel, 5 bat, single span reel, flip-over design, cam-leading finger control/Hydraulic/SP windrower 0 to 62 rPM, combine 0 to 67 rPM (varies depending on combine model)/Wear-resistant plastic, 6 in. (152 mm) spacing, 11 in. (279 mm) length

conveyor: type/Drive/ Speed/Delivery

41.6 in. (1057 mm) wide rubber skim-coated drapers, v-guide tracking, integral seal on leading edge/Hydraulic/SP windrower 0 to 742 fPM, combine 0 to 464 fPM/center delivery, opening width 60.6 in. (1539 mm) to 76.7 in. (1948 mm)

2 for combine application add approximately 2,000 lb. (905 kg) for combine adapter.

MacDon owners are talking…read and watch what they are saying by visiting Producers Corner and MacDon TV at macdon.com.

d and fd serIes coMParIsonsheader d50 d60 fd70

Mounts to M Series MacDon-built windrower tractors

n n

Mounts to most current model combines (ca20 adapter required)

n n n

Single knife drive n n n

Double knife drive n n 3

Hydraulic shifting deck n

Hydraulic fore and aft reel positioner n n 4 n 4

Hydraulic header tilt n n n 4

Stabilizer wheels n n n

Stabilizer wheels with slow speed transport

n n 5 n

upper cross auger n n n

Mt8 highway transporter n n n

sIzes

15' (4.6 m) n

20' (6.1 m) n

25' (7.6 m) n

30' (9.1 m) n n n

35' (10.6 m) n n n

40' (12.2 m) n n

45' (13.7 m) 6 n

3 Select sizes 4 Standard equipment 5 for 30' (9.1 m) and larger sizes only 6 not recommended for mounting to self-propelled tractor

Macdon Industries ltd. 680 Moray StreetWinnipeg, Manitoba canada r3j 3S3t. (204) 885-5590 f. (204) 837-8396

Macdon, Inc. 10708 n. Pomona avenue kansas city, Missouri united States 64153-1924 t. (816) 891-7313 f. (816) 891-7323

Macdon australia Pty. ltd. a.c.n. 079 393 721 P.o. box 243, Suite 3, 143 Main Street greensborough, victoria australia 3088 t. 03 9432 9982 f. 03 9432 9972

www.macdon.com

trademarks of products are the marks of their respective manufacturers and/or distributors. Prices, specifications and options subject to change without notice. Products subject to availability. Products featured may include available options. Mf11124 Printed in canada 08/2008 Part #147524

the american Society of agricultural and biological engineers has recognized MacDon’s new generation of equipment by bestowing no less than three ae50 awards on the series for their ground breaking technological innovations. ae50 awards are determined in competition against the best machines produced by the world’s top manufacturers each year.