Date post: | 01-Feb-2016 |
Category: |
Documents |
Upload: | regine-sagad |
View: | 213 times |
Download: | 0 times |
1,Single head hot press Equipment disposition: Generally four hot presses are a production line, must provide the dryer, the gluing machine, grinder each. (dryer, gluing machine, grinder and so on supporting facility customer buys in addition). Personnel disposition: Production personnels 4-5 person per shift. And raw material sort (screening), drying, spreads 2-3 people, looked that machine 2 people (a person may look at two machines). Production cycle: After confirmation order form and payment advanced payment, 40 super craftsmen ship factory delivery. Equipment investment recoupment period: 10— 12 months. Our factory is responsible for the technical training, and provides the consummation the post-sale service.
Technical parameter
We have many models of wood pallet hot-press machine; different model can make different size.Please use wood shavings and sawdust to make pallets. If the raw material is not very big, it is unnecessary to crush.
ModelPower input (kw)
Outlook size (mm)
Production efficiency (m3/24h)
Supports the
density (kg/m3)
Warm prosecution
type
Complete machine weight (kg)
Remark
SLWP75*75/2 155000*600*130
0 3 550-600PID adjusts the merit accent to press the control
1000Double head
SLWP80*100/2 155000*600*130
0 3.5 550-600 1200Double head
SLWP80*130 185000*600*130
0 3 550-600 1200
SLWP80*90/2 155000*600*130
0 3.5 550-600 1200Double head
SLWP90*90/2 155000*600*130
0 4 550-600 1200Double head
SLWP100*100/ 18 5000*600*130 4.5 550-600 1200 Double
2 0 head
SLWP100*115 185000*600*130
0 3 550-600 1300
SLWP100*130 185000*600*130
0 3.5 550-600 1400
SLWP140*140 185000*600*130
0 3.5 550-600 1500 This cushion has the diameter 18-28mm vertical heart garden hole according to the different specification, conforms to the European Tray Association the load-bearing wooden block's manufacture instrument of ratification stipulation which is made by the wooden dregs board (the load-bearing wooden block specification 100mm*145mm diameter not to be able to surpass 32mm, the 145mm*145mm diameter not to be able to surpass 40mm). (The size could be customized)State Forestry Bureau East China lumber and woodware quality surveillance test center check result Formaldehyde release quantity (mg/100g): 21.4 conform to E2 Grasps the bolt strength (N): 980In bonding strength (Mpa):1.762,Glue mixer (Gluing machine)
3,Dryer machine If the marterial’s moisture is above 15%,the drying machine is needed to dry the moisture under 15% before mixing the material ( e.g.sawdust ) with glue.The productivity can be designed as the requirements from customers. In the sawdust dryer, high-speed hot air stream sustain raw material in the suspending state, then the material is dried. Since air stream speed is very high, and mateirls
suspending in air stream, the heat transfter surface between air and raw mateiral is large, so the heat transfer rate is high.
Model SLWPDProductivity(Kg/hour) 250-300kgThe diameter of the materials < 3mm & < 5mmThe temperature of the heating air 180°C~250°CMotor power 4kwWeight 1200kgSize of the machine 10*1.0*2.0m
4,Crusher If the materials log is bigger than 5*5mm(,smaller than 200mm,there is necessary to crush the material into 5*5mm for further processing.)
Model SLC-600Motor 18.5kwBlades(pcs) 4Capacity(3*3mm) 2.2t/hLog diameter <230mm
Water Cycle Quail Egg Peeling Machine
1.Character for Quail Egg peeling Machine1) Separate the egg and shell quickly, reducing the cost and with high efficiency2) Water-saving, economic3) Low breakage, keep egg in good condition4) Well-designed, durable and light5) Stainless steel made, easy to operate, safe and environment protection。
2,Technical Parameter
Both motor and rubber tube are made in Taiwan.
Electronic Quail shell breaking Machine
1.Character for shell breaking machine
Model Voltage Power Capacity Weight DimensionSLMYB-3 220/380v 400kw 10000pc/h(150kg) 115kg 120*60*90cm
1) It usually work together with the quail egg peeling machine, improving the peeling efficiency, and reduce the breaking rate.2) Stainless steel made, light and durable
2.Technical Parameter
Model Voltage Capacity Weight DimensionSLMYP-2 220V/380V 330kg/h 48kg 96*6*1m