360 14,17 206 8,11 8 0,31 250,5 9,86 101 3,96 146 5,75 240 9,45 119 4,69 60 2,36 18 0,71 131,5 5,18 30 1,18 110 4,33 30 1,18 203 7,99 227 8,92 252 9,92 714 28,10 423 16,65 54 2,13 52 2,05 25 0,98 25 0,98 343 13,50 285 11,20 33 1,28 37 E(Y) 1,46 235 9,25 10 E(X) 0,39 30 1,18 110 4,33 30 1,18 110 4,33 30 1,18 30 1,18 25 0,98 393 15,47 25 0,98 343 13,50 135 5,30 16 x M12 20[0,79] 186 7,34 372 14,65 150 5,91 193 7,60 85 3,35 85 3,35 16,5 0,65 13,50 0,53 136 5,35 108 4,25 54,5 2,15 101 3,98 1 2 3 V1 V2 F 8 E D C B A G H J K L M 7 6 5 4 3 2 1 9 10 11 12 13 14 15 9 1 2 3 4 5 6 7 8 10 11 G B C D E F H J D: E: VIME Industrial : reserves the right to improve its products through changes in designed or materials as it may seem desiderable without notice Pulling capacity (Kgs.) 6200(6700) Winch CODE Heavy-duty Rope tensioner Modification Date PLUGS The Quality is Transparent 10,3 Kgs. 2 Kgs. 252 mm 155(165) Bar Gear ratio Orbital hydr. motor Working pressure Drum size WEIGHTS V1 1/2"G EPHFN PLANETARY GEAR WINCH GROUP WINCH MODEL V2 1/2"G E (X) DISENGAGED ------- 1.Fill 2.Level 3.Drain Roller fairlead 57,9 Kgs. DANGEROUS: Do not use winch to lift support or transport personnel. 5,3 : 1 400 cc Funo - Bologna (Italy) www.vimeindustrial.com 1/4"G 1/8"G 1/4"G Drum clutch Manual Max.Oil flow Speed Line - first layer Speed Line - top layer EPHFN62H400GV EPHFN67H400GV E (Y) ENGAGED ------- 60 Lt./Min. 8,7 Mt./Min. 15,6 Mt./Min. CONNECTIONS SCALE 1: 2.5 DATE 22/11/2010 Machinery Directive 2006/42/CE EN 14492-1
Transcript
36014,17
2068,11
80,31
250,59,86
1013,96
1465,75
2409,45
1194,69
602,36 18
0,71
131,55,18
301,18
1104,33
301,18
2037,99
2278,92
2529,92
71428,10
42316,65
542,13
522,05
250,98
250,98
34313,50
28511,20
331,28
37 E(Y)1,46
2359,25
10 E(X)0,39
301,18
110
4,33
301,18
1104,33
301,18
301,18
250,98
39315,47
250,98
34313,50
1355,30
16 x M12 20[0,79]
1867,34
37214,65
1505,91
1937,60
853,35
853,35
16,50,65 13,50
0,53
1365,35
1084,25
54,52,15
1013,98
1
2
3
V1
V2F
8
E
D
C
B
A
G
H
J
K
L
M
7654321 9 10 11 12 13 14 15
91 2 3 4 5 6 7 8 10 11
G
B
C
D
E
F
H
J
D:
E:
VIME Industrial : reserves the right to improve its products through changes in designed or materials as it may seem desiderablewithout notice
Pulling capacity (Kgs.) 6200(6700)
Winch
CODE
Heavy-duty
Rope tensioner
ModificationDate
PLUGS
The Quality is Transparent
10,3 Kgs.
2 Kgs.
252 mm
155(165) Bar
Gear ratio
Orbital hydr. motor
Working pressure
Drum size
WEIGHTS
V1 1/2"G
EPHFN PLANETARY GEARWINCHGROUP
WINCHMODEL
V2 1/2"G
E (X) DISENGAGED -------
1.Fill2.Level
3.Drain
Roller fairlead
57,9 Kgs.
DANGEROUS: Do not use winch to lift support or transport personnel.
5,3 : 1
400 cc
Funo - Bologna (Italy)www.vimeindustrial.com
1/4"G1/8"G
1/4"G
Drum clutch Manual
Max.Oil flowSpeed Line - first layer
Speed Line - top layer
EPHFN62H400GVEPHFN67H400GV
E (Y) ENGAGED -------
60 Lt./Min.
8,7 Mt./Min.15,6 Mt./Min.
CONNECTIONS
SCALE 1: 2.5
DATE22/11/2010
Machinery Directive 2006/42/CEEN 14492-1
36014,17
2068,11
80,31
250,59,86
1013,96
1465,75
2409,45
1194,69
602,36 18
0,71
131,55,18
301,18
1104,33
301,18
M12
200,79
2037,99
2278,92
2529,92
71428,10
42316,65
542,13
522,05
E(X) 110,43
250,98
250,98
34313,50
28511,20
331,28
2359,25
301,18
110
4,33
301,18
1104,33
301,18
301,18
250,98
39315,47
250,98
34313,50
1355,30
16 x M12 20[0,79]
1867,34
37214,65
1505,91
1937,60
853,35
853,35
16,50,65 13,50
0,53
1365,35
1084,25
54,52,15
1013,98
1
2
3
V1
V2F
8
E
D
C
B
A
G
H
J
K
L
M
7654321 9 10 11 12 13 14 15
91 2 3 4 5 6 7 8 10 11
G
B
C
D
E
F
H
J
D:
E:
VIME Industrial : reserves the right to improve its products through changes in designed or materials as it may seem desiderablewithout notice
Pulling capacity (Kgs.) 6200(6700)
Winch
CODE
Heavy-duty
Rope tensioner
ModificationDate
PLUGS
The Quality is Transparent
10,3 Kgs.
2 Kgs.
252 mm
155(165) Bar
Gear ratio
Orbital hydr. motor
Working pressure
Drum size
WEIGHTS
V1 1/2"G
EPHFN PLANETARY GEARWINCHGROUP
WINCHMODEL
V2 1/2"G
E (X) DISENGAGED 1/8" G
1.Fill2.Level
3.Drain
Roller fairlead
57,9 Kgs.
DANGEROUS: Do not use winch to lift support or transport personnel.
5,3 : 1
400 cc
Funo - Bologna (Italy)www.vimeindustrial.com
1/4"G1/8"G
1/4"G
Drum clutch Air-operated
Max.Oil flowSpeed Line - first layer
Speed Line - top layer
EPHFN62H400AGVEPHFN67H400AGV
E (Y) ENGAGED RETURN SPRING
60 Lt./Min.
8,7 Mt./Min.15,6 Mt./Min.
CONNECTIONS
SCALE 1: 2.5
DATE22/11/2010
Machinery Directive 2006/42/CEEN 14492-1
36014,17
2068,11
80,31
250,509,86
1013,96
1465,75
2409,45
1194,69
602,36 18
0,71
301,18
1104,33
301,18
2037,99
2278,92
2529,92
71428,10
42316,65
542,13
522,05
250,98
250,98
34313,50
28511,20
331,28
37 E(Y)1,46
2359,25
10 E(X)0,39
301,18
110
4,33
301,18
1104,33
301,18
301,18
250,98
39315,47
250,98
34313,50
1355,30
16 x M12 20[0,79]
1867,34
37214,65
1505,91
1937,60
853,35
853,35
16,50,65 13,50
0,53
1365,35
1084,25
54,52,15
1013,98
1
2
3
V1
V2
151MAX
5,94
270MAX
10,63
M12
200,79
F
8
E
D
C
B
A
G
H
J
K
L
M
7654321 9 10 11 12 13 14 15
91 2 3 4 5 6 7 8 10 11
G
B
C
D
E
F
H
J
D:
E:
VIME Industrial : reserves the right to improve its products through changes in designed or materials as it may seem desiderablewithout notice
Pulling capacity (Kgs.) 6200(6700)
Winch
CODE
Heavy-duty
Rope tensioner
ModificationDate
PLUGS
The Quality is Transparent
10,3 Kgs.
2 Kgs.
252 mm
155(165) Bar
Gear ratio
Orbital hydr. motor
Working pressure
Drum size
WEIGHTS
V1 1/2"G
EPHFN PLANETARY GEARWINCHGROUP
WINCHMODEL
V2 1/2"G
E (X) DISENGAGED -------
1.Fill2.Level
3.Drain
Roller fairlead
57,9 Kgs.
DANGEROUS: Do not use winch to lift support or transport personnel.
5,3 : 1
400 cc
Funo - Bologna (Italy)www.vimeindustrial.com
1/4"G1/8"G
1/4"G
Drum clutch Manual
Max.Oil flowSpeed Line - first layer
Speed Line - top layer
EPHFN62H400GPVEPHFN67H400GPV
E (Y) ENGAGED -------
60 Lt./Min.
8,7 Mt./Min.15,6 Mt./Min.
CONNECTIONS
SCALE 1: 2.5
DATE22/11/2010
Machinery Directive 2006/42/CEEN 14492-1
36014,17
2068,11
80,31
250,509,86
1013,96
1465,75
2409,45
1194,69
602,36 18
0,71
301,18
1104,33
301,18
M12
200,79
2037,99
2278,92
2529,92
71428,10
42316,65
542,13
522,05
E(X) 110,43
250,98
250,98
34313,50
28511,20
331,28
2359,25
301,18
110
4,33
301,18
1104,33
301,18
301,18
250,98
39315,47
250,98
34313,50
1355,30
16 x M12 20[0,79]
1867,34
37214,65
1505,91
1937,60
853,35
853,35
16,50,65 13,50
0,53
1365,35
1084,25
54,52,15
1013,98
1
2
3
V1
V2
151MAX
5,95
270MAX
10,63
F
8
E
D
C
B
A
G
H
J
K
L
M
7654321 9 10 11 12 13 14 15
91 2 3 4 5 6 7 8 10 11
G
B
C
D
E
F
H
J
D:
E:
VIME Industrial : reserves the right to improve its products through changes in designed or materials as it may seem desiderablewithout notice
Pulling capacity (Kgs.) 6200(6700)
Winch
CODE
Heavy-duty
Rope tensioner
ModificationDate
PLUGS
The Quality is Transparent
10,3 Kgs.
2 Kgs.
252 mm
155(165) Bar
Gear ratio
Orbital hydr. motor
Working pressure
Drum size
WEIGHTS
V1 1/2"G
EPHFN PLANETARY GEARWINCHGROUP
WINCHMODEL
V2 1/2"G
E (X) DISENGAGED 1/8" G
1.Fill2.Level
3.Drain
Roller fairlead
57,9 Kgs.
DANGEROUS: Do not use winch to lift support or transport personnel.
5,3 : 1
400 cc
Funo - Bologna (Italy)www.vimeindustrial.com
1/4"G1/8"G
1/4"G
Drum clutch Air-operated
Max.Oil flowSpeed Line - first layer
Speed Line - top layer
EPHFN62H400AGPVEPHFN67H400AGPV
E (Y) ENGAGED RETURN SPRING
60 Lt./Min.
8,7 Mt./Min.15,6 Mt./Min.
CONNECTIONS
SCALE 1: 2.5
DATE26/04/2010
Machinery Directive 2006/42/CEEN 14492-1
Section 1 Safety procedures
1.4.15 EPH 6200 FN WINCH TECHNICAL DATA
17
1.4.16 EPH 6200 FN WINCH PERFORMANCE CHARTS AT THE 1ST LAYER
The Quality is Transparent
RATIO WIRE ROPE
SIZE [MM]
LAYER LINE PULL
[KG]
5,3:1 12*
1 6.200
2 5.167
3 4.429
4 3.875
5 3.444
OIL SUPPLY [LT/MIN]
LINE SPEED [MT/MIN]
1 2 3 4 5
40 16,2 6,1 7,3 8,6 9,8 11,0
50 20,3 7,6 9,2 10,7 12,2 13,7
60 24,4 9,2 11,0 12,8 14,7 16,5
DRUM REVOLUTION
[RPM]
WEIGHTS
KGS.
WINCH (WITHOUT CABLE) 57,9
ACCESSORY : ROLLERFAILREAD 10,3
ACCESSORY : CABLE TENSIONER 2,0
DESCRIPTION
MAX. WIRE ROPE CAPACITY
EN 14492-1 [MT]
MAX. WIRE ROPE CAPACITY
[MT]
12 MM 00 MM 12 MM 00 MM 12 MM 00 MM
30 00 39** 00 52 00
WIRE ROPE CAPACITY
[MT]
DRUM EPH 6200 FN = 252 MM
LAYER
DRUM DIAMETER
WIRE ROPE ON LAYER
WIRE ROPE QUANTITY
[MT] [MT]
Ø MM 12 MM 00 MM 12 MM 00 MM
5 216 - 13,6 - 52,8 -
4 192 - 12,1 - 39,2 -
3 168 - 10,6 - 27,1 -
2 144 - 9,0 - 16,6 -
1 120 - 7,5 - 7,5 -
0 108 - - - - -
Ø 108
LAYER
Ø 23
5
0,00
2,00
4,00
6,00
8,00
10,00
20 30 40 50 60
ALIMENTAZIONE OLIO [litri/min]
01.0002.0003.0004.0005.0006.0007.000
55 75 95 115 135 155
PRESSIONE DI LAVORO [Bar]
LINE PULL-FIRST LAYER [KG] LINE SPEED [M/MIN]
WORKING PRESSURE [BAR] OIL SUPPLY [LT/MIN]
NOTES *Wire rope size must be respected. Recommanded wire rope min. tensile strength 2160 N/mm². Wire rope minimum breaking load must be at least double of winch max. pulling capacity. ** Max. wire rope capacity according with EN 14492-1.
NOTES Specifications are subject to change without notification and without incurring obligation. Specifications in this publication are theoritical and may vary depending on hydraulic system, enviroment, etc.
WIRE ROPE MINIMUM BREAKING LOAD EN 14492-1 [KG] 12.400
Section 1 Safety procedures
1.4.18 EPH 6700 FN WINCH TECHNICAL DATA
19
1.4.19 EPH 6700 FN WINCH PERFORMANCE CHARTS AT THE 1ST LAYER
The Quality is Transparent
RATIO WIRE ROPE
SIZE [MM]
LAYER LINE PULL
[KG]
5,3:1 12*
1 6.700
2 5.583
3 4.786
4 4.188
5 3.722
OIL SUPPLY [LT/MIN]
LINE SPEED [MT/MIN]
1 2 3 4 5
40 16,2 6,1 7,3 8,6 9,8 11,0
50 20,3 7,6 9,2 10,7 12,2 13,7
60 24,4 9,2 11,0 12,8 14,7 16,5
DRUM REVOLUTION
[RPM]
WEIGHTS
KGS.
WINCH (WITHOUT CABLE) 57,9
ACCESSORY : ROLLERFAILREAD 10,3
ACCESSORY : CABLE TENSIONER 2,0
DESCRIPTION
MAX. WIRE ROPE CAPACITY
EN 14492-1 [MT]
MAX. WIRE ROPE CAPACITY
[MT]
12 MM 00 MM 12 MM 00 MM 12 MM 00 MM
30 00 39** 00 52 00
WIRE ROPE CAPACITY
[MT]
DRUM EPH 6700 FN = 252 MM
LAYER
DRUM DIAMETER
WIRE ROPE ON LAYER
WIRE ROPE QUANTITY
[MT] [MT]
Ø MM 12 MM 00 MM 12 MM 00 MM
5 216 - 13,6 - 52,8 -
4 192 - 12,1 - 39,2 -
3 168 - 10,6 - 27,1 -
2 144 - 9,0 - 16,6 -
1 120 - 7,5 - 7,5 -
0 108 - - - - -
Ø 108
LAYER
Ø 23
5
0,00
2,00
4,00
6,00
8,00
10,00
20 30 40 50 60
ALIMENTAZIONE OLIO [litri/min]
01.0002.0003.0004.0005.0006.0007.0008.000
65 85 105 125 145 165
PRESSIONE DI LAVORO [Bar]
LINE PULL-FIRST LAYER [KG] LINE SPEED [M/MIN]
WORKING PRESSURE [BAR] OIL SUPPLY [LT/MIN]
NOTES *Wire rope size must be respected. Recommanded wire rope min. tensile strength 2160 N/mm². Wire rope minimum breaking load must be at least double of winch max. pulling capacity. ** Max. wire rope capacity according with EN 14492-1.
NOTES Specifications are subject to change without notification and without incurring obligation. Specifications in this publication are theoritical and may vary depending on hydraulic system, enviroment, etc.
WIRE ROPE MINIMUM BREAKING LOAD EN 14492-1 [KG] 13.400
