Machinery Listingsfinatexinternational.com/Machines-rovingframe.pdf · 2016. 5. 7. · Roving Frame...

Machinery Listings Finatex International: Please ask for details at: [email protected]

Yarn Processing

Grossenhainer

Roving Frame

- 1 GROSSENHAINER ROVING FRAME Type BF 224 Year 1997 120 Pos. 16" x 6" Gauge 224 mm with Doffer with Sohler Overhead Blower Main Drive with 4 Motors Tag # 50718 Price: F.O.T. EURO 24,000.00 1 GROSSENHAINER ROVING FRAME Type BF 224/5 Year 2001 120 Pos. 16" x 6" Gauge 224 mm with Doffer with Sohler Overhead Blower Main Drive with 5 Motors Tag # 50719 Price: F.O.T. EURO 30,000.00

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 10533 Terms: SEE DESCRIPTION

Cost: 0 Pictures not available

-3 SETS GROSSENHEINER ROVING FRAME1998 yom SKF PK 1500 DRAFTING 120 SPINDLESCLOSED FLYER SOHLER OVERHEAD CLEANER

euro 20.000/each




Cost: 0 http://finatexinternational.com/pictures/15593.zip

Howa

Roving Frame

-o 5 Howa RMK2B Roving frames• 4 Machine of 1987• 1 Machine of 1992• 116 spindles• 16 x 6” flyer• 4 x 4 skf pk 1500 drafting• Short cradle (35mm)• 520mm x 1230mm feed can dia• 4 creel rollers• Top positive roller fitted fixed type• Bottom roller fixed type• 28mm bottom roller dia• 445mm bobbin length• 520mm shaft length• Close type flyer• No travelling clearer• 440/60 volt/frequency• Cotton processed• Inverter fitted• OHTC sharing for 2 machineso 4 Howa RMK2B Roving frames• 1 Machine of 1987• 1 Machine of 1988• 1 Machine of 1989• 1 Machine of 1991• 96 spindles• 16x6” flyer• 4 x 4 skf pk 1500 drafting• Short cradle (35mm)• 520mm x 1230mm feed can dia• 4 creel rollers• Top positive roller fitted fixed type• Bottom roller fixed type• 28mm bottom roller dia• 445mm bobbin length• 520mm shaft length• Close type flyer• No travelling clearer• 440/60 volt/frequency• Cotton processed• RT clearer fitted• Inverter fitted



Reference: 9914 Terms: -Cost: 0 Pictures not available

-6 X Howa RME RovingFrames

• Year : 1991• No of spindles: 108• Bobbin size: 6” X 16”• Drafting: SKF PK 1500 • Type of flyer: Closed• Cradle: SKF Model OH-514• Bottom rol dia: 28.5mm• Howa Model RT Tension controller




8 Howa Roving Frames - RME, 108 Spindles SKF PK-1500 Drafting, 16" x 6" Bobbins 1988 6 Howa Roving Frames RME 108 Spindles SKF PK-1500 Drafting 16" x 6" Bobbins 16" Lift 28.5 mm Bottom Roll Diameter SKF Model OH-514 Cradle System Howa Model RT Tension Controller Okura Bobbin System and Can Infeed/Outfeed Conveying System 1991 4 Howa Roving Frames - Model RME 108 Spindles Each SKF PK 1500 Drafting Autodoff 16 x 6” Bobbin Year 1987 Price: ex mill floor USD





- 6 Howa Roving Frames RME 108 Spindles SKF PK-1500 Drafting 16" x 6" Bobbins 16" Lift 28.5 mm Bottom Roll Diameter SKF Model OH-514 Cradle System Howa Model RT Tension Controller Okura Bobbin System and Can Infeed/Outfeed Conveying System 1991 Price: F.O.T. USD 24,000.00 each





- 8 Howa Roving Frames RME, 108 Spindles SKF PK-1500 Drafting, 16" x 6" Bobbins 1988 Tag #53355-62 Price: ex mill floor USD 24,000.00 each





-1 X Howa RME RovingFrame • Staff length: 520mm




Ingolstadt

Roving Frame

(8)Speed Frames81991Roving frame, ingolstadt 96 spindles per machine




Marzoli

Roving Frame

03 MARZOLI simplex model BCX 16, spindle nr 96, SKF PK 1500, Murao cleaner, T5 programm, Magitex, spool 6” x 16”, automatic doffing

Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!


-08 BCX 16 S MARZOLI Roving framesYear 1994/5Feeding creel for cans of 24” x 45” ( 600 mm. x 1200 mm.)Photocells in entry and exitDrafting device SKF PK 1500120 spindles each machine3 over 3Medium cradle SKFBottom rollers bearing are SKFSuspended FlyesMURAO BOOKI top cleares deviceBobbin of 6” x 16” mm. ( 152,4 mm. x 406.6 mm.)Integrated automatic doffing device08 ASM MAGITEX Travelling cleanerYear 1994/5Complete with rails ance central collection box




-04 BCX 16 S MARZOLI Roving framesYear 1995/6Feeding creel for cans of 24” x 45” ( 600 mm. x 1200 mm.)Photocells in entry and exitDrafting device SKF PK 1500120 spindles each machine3 over 3Medium cradle SKFBottom rollers bearing are SKFSuspended FlyesMURAO BOOKI top cleares device ( fitted in 2001)Bobbin of 6” x 16” mm. ( 152,4 mm. x 406.6 mm.)Integrated automatic doffing deviceFOT PRICE EURO 19.000,00,00 EACH





-Marzoli Roving frame: FT2DN01 automatic roving frame from Marzoli, Model: FT2DN.number of spindle: 132gauge: 260 mmdrafting system: SKF - PK 5035 mediumcreel with 4 lanes for Canscan size: 24"covering assl. Amstrongsuperior cleaner: Muraoautomatic tension control with speed sensorsbreak control system with photocells on each spindlebobbin size: 7"delivery speed: up to 5 m/minflyer speed: up to 1500 rpminstalled power: 37,5 KWoverhead cleaner: Magitexyear of construction : 2006

Condition: on Mill floorPrice: upon requestDelivery: readyLocation: Italy




-03 BCX 16 A MARZOLI Roving frames Year 1997 Feeding creel for cans of 24” x 45” ( 600 mm. x 1200 mm.) Photocells in entry and exit Drafting device SKF PK 1500 12 spindles each machine 3 over 3 Medium cradle SKF Bottom rollers bearing are SKF Suspended Flyes Bobbin of 6” x 16” mm. ( 152,4 mm. x 406.6 mm.) Integrated automatic doffing device




-: 2 Roving frame MARZOLI BC 16Year : 1986 , 50 spindles, tube diam. 50 mm, height 445 mm, Magitex blower.




4 MARZOLI ROVING FRAMES Type BC 16/S Year 1990 120 Pos. Full Bobbin Size 16” x 6” TAG # 99080, 99081, 99082, 99083 Price: F.O.T. EURO 30,000.00 each Linked with: UTIT System to the Ringspinning EURO 15,000.00 Machines





-02 BX16 A MARZOLI® ROVING FRAMES with doffingYear 1998Feeding creel for cans of 24” x 45” ( 600 mm. x 1200 mm. )05 Lines of positive hexagonal rollerData logic Photocells in entry and exitDrafting device Tex Parts ® PK 1500Drafting device 3 over 3Black sliver guide in entryMedium cradleBlue clips on side Tex Parts®Suction of the slivers spindle by spindleTop rollers Armstrong type J490Suspended flyers drive by belts120 spindles each machineSpool size 6” x 16” sizeAutomatic doffing IntegratedMani Motor drive by frequency inverterVoltage 380.3.50 Hz.

ACCESSORIES INCLUDED IN THIS OFFER:01 MAGITEX® travelling cleaner complete with railPredisposed for centralized waste collection01 fan Hp 7.5 for fibre extraction01FKKA LTG® faser compactor for fibre collection of the Magitex® and Pneumafil01 set of catalogue (instruction manuals, spare parts book and electrical diagrams)01 SIMES apron spare to up load the program of the PLC01 box with gears and some spare used end new



Reference: 12221 Terms: -Cost: 0 http://finatexinternational.com/pictures/12221.zip

-2 MARZOLI BC-16 Roving-frame with 92 spindles, PK-1500 drafting, yoc 1990




2MARZOLI BC-16 Roving-frame with 92 spindles, PK-1500 drafting, yoc 1990

Reference: 5330 Terms: EACH, EURO, CNF

Cost: 15,000 http://finatexinternational.com/pictures/5330.zip

-2 X Marzoli BCX 16A Roving Frames•Year:1993•Noof spindles:120•Drafting:3/3 SKF PK 1600•Flyer size: 16 X 6”•Typeof flyer:Closed•Cradle:Short•Stafflength:520mm•Inverter:Available•Mainmotor:13Kw•OHTC:Magitex•Creelrows:4•Bottompositive clearer:Revolving type




NSC

Roving Frame

-NSC BM 15 ROVING FRAME ( for wool ) 64 heads , h. tube 430 mm. , gauge 185 mm. ( 7,5 inches ) , yoc 1995 , with auto doffing




-1 NSC Roving frame, mod. BM14, yoc 1986, 64 spindles,




Rieter

Roving Frame

Rvized02 RIETER ROVING FRAMES F5 D, Year 1997, creel Rieter for cans up to 18″ Drafting SKF PK 1500,automatic doffing , 120 spindles each one, Spool size 6″ x 16″, Murao system, Roy electrotex system, Electrojec travelling cleaner

Delivery: readyLocation: Portugal.Machines on mill floor, stopped.

Delivery: ready


(8) Roving frame Rieter F1/1a number of spindles - 108, spindle gauge 240 mm , arm FS 185 P2, Ne 0,5 to 3, max. speed 1200 Mt/min,twist – 46 to 96(T/MT) YOC 19896000 EUR CFR net to us





-02 RIETER ROVING FRAMES F5 D, Year 1997, creel Rieter for cans up to 18″ Drafting SKF PK 1500,automatic doffing , 120 spindles each one, Spool size 6″ x 16″, Murao system, Roy electrotex system, Electrojec travelling cleaner





(2)Roving frame RIETER F5 YOM 1995 (96 spindles)

Reference: 5973 Terms: EACH, USD, CNF

Cost: 16,000 Pictures not available

-1 RIETER ROVING FRAME Type F10 Year 1999 84 Pos. Gauge 260 mm Traverse 400 mm Full Bobbin Size 16" x 6" Drafting System SKF-PK 1500 Tag #50721 Price: F.O.T. EURO 39,000.00





-02 RIETER ROVING FRAMES F5 D, Year 1997, Rieter creel for cans up to 18″ Drafting SKF PK 1500,automatic doffing , 120 spindles each one, Spool size 6″ x 16″, Murao system, Roy electrotex system, Electrojec travelling cleaner





-2 X Electrojet RovingFrames • Bottom positive clearer: Available




Saco

Roving Frame

2 Roving frames SACO-LOWELL type FC1BYear : 1962 , 80 spindles; bobbin dimension 14"/7"; drafting PK1500.




Schlumberger

Roving Frame

-SCHLUMBERGER BM-11 roving frame - 1 pc - 1990 year

In addition: Different spare parts for full line.

All above machines are running in production cycle for standart and bulk acrilic yarn as well as wool similar yarn.




Textima

Roving Frame

-TEXTIMA roving frame - 2 pc - year 1987




Toyoda

Roving Frame

-2 X TOYODA FL 16 ROVING FRAME

• Year: 1985• No. of Spindles : 96• Drafting: SKF PK1500 3 over 3• Bottom roll dia: 40-32.5-40• Cradle: Medium type OH 534• Staff Length: 520• Flyer: 6” X 16” • Bottom clearer: Stationary type• Top Positive Clearer: Available• Creel: 4 row• Main motor: 11kW• Volt/Freq: 440/60




Toyota

Roving Frame

-2 X Toyoda FL 16 Roving Frame

• Year : 1990• No of spindles: 108• Gauge: 520mm• Drafting: SKF PK 1500 4 over 4• Flyer: 16 X 6 Closed flyer• Positive Clearer: Top and Bottom available




-Roving Frame Toyoda 1985 FL-16 5 T/P 6"×16", 108 spls, Closed Flyer, 3 Lines Draft System




-Toyoda Roving Frame FL16 !! x 5 sets. Yom : 1993. Spl.: 96 spl./set. Closed Flyer. Pitch : 440mm, 4/4 PK1500 Draft System. Short Cradle.detailed spec. is as per below.All Parts are complete,

FL16- 96 spl.5 setsToyodaFL16 96 spl.199316" X 6"4/4 SKF PK150028mmShort CradleClosed TypeTop Clearer : positive driven, Bottom Clearer :Positive Driven, Suction Device.440mmby Cone Drumby Photos Cell7 Rows, 5 rows with Guide, 2 Rows just support.now stop in Floor




-8 X TOYODA FL 100 ROVING FRAMES • Year : 3 x 1995; 4 x 1996; 1 x 1997; • No of spindles: 120• Drafting: SKF PK 1500- 4 over 4• Bottom roll dia: 28.5mm • Type of flyer: Closed• Cradle: Medium • Staff length: 440mm• Inverter: Available• OHTC: Pneumablo type B• Gauge: 110mm• Creel: 6 row 1 X TOYODA FL 100 ROVING FRAME • Year : 2001• No of spindles: 120• Drafting: SKF PK 1500- 4 over 4• Bottom roll dia: 28.5mm • Type of flyer: Closed• Cradle: Medium • Staff length: 520 • Inverter: Available• OHTC: Pneumablo type B• Gauge: 110mm• Creel: 6 row




-o 3 X TOYODA FL 16 ROVING FRAMES• Year : 1989• No of spindles: 120• Drafting: SKF PK 1500- 4 over 4• Bottom roll dia: 28.5mm • Type of flyer: Closed• Staff length: 520mm• Inverter: Available• Motor capacity kW: 15kW OHTC: Available • Gauge: 110mm• Creel: 5 row o 2 X TOYODA FL 16 ROVING FRAMES• Year : 1 X 1989; 1 X 1987• No of spindles: 108• Drafting: SKF PK 1500- 4 over 4• Bottom roll dia: 28.5mm • Type of flyer: Closed• Staff length: 520mm• Inverter: Available• Motor capacitykW: 15kW• OHTC: 1 X OHTC• Gauge: 110mm• Creel: 5 row




-2 X TOYODA FL 16 Roving Frame 2 X TOYODA FL16 ROVING FRAMES (SUITABLE FOR ACRYLIC/WORSTED) • Year: 1989/1990• No. of Spindles : 96• Drafting: SKF PK1500 3 over 3• Bottom roll dia: 40-32.5-40• Cradle: Medium type OH 534• Staff Length: 520• Flyer: 6” X 16” • Bottom clearer: Stationary type• Top Positive Clearer: Available• Creel: 4 row• Main motor: 11kW• Volt/Freq: 440/60




-4 X Toyoda FL 16 Roving Frame • Year : 1989• No of spindles: 108• Flyer: 16” x 6”• 4 roller version• Flyer type: Closed Flyer• Auto tension: Available• Staff length: 520mm• Inverter: Available• Top positive clearer : Available• Bottom positive clearer: Available




-2 X Toyoda FL100 simplex • Year:1996 • No of flyer:120• flyer:closed ; 16” X 6”• Staff length: 440• Cradle: Short• Drafting: SKF PK 1500 4 over 4• Top positive clearer: Available• Bottom positive clearer : Available• Creel: 6 rollers• OHTC: Electrojet ( 1 OHTC for 2 m/cs)• Roving tension controller : Available USD 95,000 CNF Condition : Stopped, dismantled and packed




-1 X Toyota RX 230 RingFrames • Year : 1994




-3 x TOYODA FL16 ROVING FRAMES

•Year :1989•No of spindles:120•Drafting: PK1500, 4 roller version•Type of flyer: 16"x6", closed flyer•Cradle: Short•Staff length: 440mm•Inverter: Not Available•Main motor: 11kW•OHTC: Not Available•Creel: 6 rows•Top and bottom positive clearer: Available•Volt/Freq: 380/50

Location: INDONESIAThe price is USD 33.000 CNF EACH





-2 x Toyoda FL100 Simplex Machine YOC : 1996 | No. of Spindles : 108 | Model : FL100 | Delivery Time : Immediate | SKF PK1500 4 x 4 Drafting, Closer Flyer, Oil bath System, Over head traveling cleaner, excellent working condition




-1.Toyoda Roving Mahine - Type : FL16- Year : 1987- Q'nty : 2 set - Spindle : 108 spindle/set- Close flyer- Drafting : PK1500- Staff Length 520 mm- 4 Roller version- Bottom rollers : 28.5 mm- 440Vx60Hz- with 2,000 pcs spare bobbin.***************************************************************************************************- Location : Korea- Picture & Video : upon request - Inspection : Available - Delivery : Immediately- Exellent maintenance & Good condition without any missing part




-1.Toyoda Roving Mahine - Type : FL16- Year : 1987- Q'nty : 2 set - Spindle : 108 spindle/set- Close flyer- Drafting : PK1500- Staff Length 520 mm- 4 Roller version- Bottom rollers : 28.5 mm- 440Vx60Hz***************************************************************************************************- Location : Korea




-1 X Toyoda FL16Roving Frame•Year:1985•Noof spindles:120•Drafting:PK1500, 4 roller version•Typeof flyer:16"x6", closed flyer•Cradle:Short•Stafflength:520mm•Inverter:Not Available•OHTC:Not Available•Creel:5rows•Topand bottom positive clearer:Available•Volt/Freq:380/50




-2 X Toyoda FL16 Roving Frames • Staff length: 520mm • Inverter: Not Available • Creel: 5 rows • Volt/Freq: 380/50




-Toyoda Roving Mahine - Type : FL16- Year : 1990- Q'nty : 3 set - Number of Spindle : 108 spindle- Close flyer- Drafting : PK1500- Staff Length 440 mm- 4 Roller version- Bottom rollers : 28.5 mm- with Bobbin 3,000 pcs ******************************************-Location : Korea-Picture : Attached file.-Condition : stop on mill floor-Delivery : Immediately.-Inspection : Available.-Split sale : Available-Price : upon request




-1 X Toyoda FL200 Roving Frame• Year: 2012• No. Of spindles: 120• Staff length: 520• Flyer size/type: 16" X 6"• Drafting: SKF• 3/3 or 4/4: 4/4• Cradle size: Short• Roving tension control: Available• Top positive clearer: Open• Bottom positive clearer: Available• No. Of creel roll: 5• Auto doffing: Available• OHTC: Pneumablo




-5 X Toyoda FL100 Roving Frames• Year: 2001• No. Of spindles: 120• Staff length: 520• Flyer size/type: 16" X 6"• Drafting: SKF• 3/3 or 4/4: 4/4• Cradle size: Short• Roving tension control: Available• Top positive clearer: Open• Bottom positive clearer: Available• Auto doffing: Available• OHTC: Pneumablo




Zinser

Roving Frame

ZINSER, 6, 1973-19, spindles 96ZINSER, 6, 1978-19, spindles 96ZINSER, 6, 19, spindles 96

12.500 USD EX WORKS,




2 Roving frame machine: Brand: Zinser , Model :1990, 660/120 units and travilling clean system from flyer



-5 X Zinser 670 Roving Frame • Year: 1999• No. of spindles: 120• Drafting: 3/3 SKF PK 1500• Staff length : 520mm• Close type flyer• With Auto doffer system: RO-CNE-MAT• With Sohler blower overhead cleaner




-2 X Zinser 670 Roving Frame • Year: 2001• No of spindles: 108 • Tube size: 6” X 16”• Drafting: 3 over 3 • OHTC: Luwa• Top positive clearer• Bottom pad type clearer




-2 X Roving frame machine: Brand: Zinser , Model :1990, 660/120 units and travilling clean system from flyer. Price: 24 000 euro \each ex mill





-Roving Frame Zinser 1999 670 3 T/F 6"×16", 120 spls, Closed Flyer, 3 Lines Draft System, 520 mm Staff 2000 " 2 " RO-WE-MAT Doffer, Sohler's UC-F Clearner, 380V/50HZ Ring




- 1 ZINSER ROVING FRAME Type 670 Year 1997 72 Pos. Gauge 260 mm Traverse 400 mm Full Bobbin Size 16” x 6” Tag # 50771 Price: F.O.T. EURO 29,000.00





- 4 Zinser Roving Frames Model RO-WE-MAT 670 Automatic Doff 16 x 6 Package SKF Drafting 120 Spindles Year: (2) 2000 (2) 2001 Price: ex mill floor USD 60,000.00 each




-1 X zinser 670 RovingFrames • Year : 2002• No of spindles: 144• Drafting: SKF PK 1500 , 3 over 3• Type of flyer: closed type• Doffer: Automatic• Cradle: Short• OHTC: Available• Exhaust air: Downwards• Top & bottom positive clearer : Available• Inverter: Available• Volt/Freq: 380/50




-5 X zinser 350 RingFrames linked to 5 x Schlafhorst 338 Winder • 5 X ZINSER 350 RINGFRAMES• Year : 2002 & 2004• No of spindles: 816• Gauge: 70mm• Ring dia: 42• Drafting: SKF PK2025• OHTC: Available• Lift: 7"• Inverter: Available• Cradle: Short• Volt/Freq: 380/50• Exhaust air: Down wards• Pnemafil collection: Manual• Doffing: Automatic LINKED TO: • 5 X SCHLAFHORST 338 RINGFRAMES • Year : 2002 & 2004• No of spindles: 20• Type of feed: Linked• Yarn Clearer: Loepfe TK840• Conicity: 4'20"• Traverse: 6"• Waxing: Available• Length Measuring system: Available• No of doffing trolleys: One• Empty tube conveyer: One• Package conveyer belt: Available• Suction: Individual• Autodoffer• OHTC: Available• tension sensor: Fx type• Inverter: Available




-1 X Zinser RO-WE-MAT 670 RovingFrames • Year : 2000 • Clossed flyer




-01 Zinser Roving Frame Model 670, Year 1999Nos. 120 spindlesMurao cleanerSpool 6 x 16 ,Fani ,Sholer Blowercreel 3 position for cans 18” Cason bobbin cleaning system incorporate with the machine Location: Italy




Date post:	07-Mar-2021
Category:	Documents
Upload:	others
View:	4 times
Download:	0 times

Machinery Listingsfinatexinternational.com/Machines-rovingframe.pdf · 2016. 5. 7. · Roving Frame...

Documents