+ All Categories
Home > Documents > Machinery Listings - FINATEX...

Machinery Listings - FINATEX...

Date post: 17-Apr-2020
Category:
Upload: others
View: 26 times
Download: 1 times
Share this document with a friend
21
Machinery Listings Finatex International: Please ask for details at: [email protected] Finishing Artos Tenters/ Stenters -ARTOS /BABCOCK STENTER machine width 3200 mm, with n.6 chambers , diathermic oil heated , pins and clips , Artos enter and delivery mangle , Bianco weft straightener , yoc 1984 PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection. PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 13839 Terms: - Cost: 0 Pictures not available -STENTER ARTOS, year 1979, 6 chambers, w.w. 3400 mm, oil heating, padder PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection. PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 14237 Terms: - Cost: 0 Pictures not available -Stenter ARTOS, 3.200mm, 4 chambers, termal oil, pin horizontal chain, padder, manual weft straightener, glue selvedges+vacuum,folding system and small roll, 1986. Location:Europe SPECIAL PRICE: 65.000,00€ F.O.T. PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection. PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 14450 Terms: SEE DESCRIPTI ON Cost: 0 http://finatexinternational.com/pictures/14450.zip Revized: 1 ARTOS/BABCOCK Tenter Frame, Model 5301, Year 1986 Working Width 3.2m, Impregnation Foulard, Model 5880, with Squeezer Steaming Unit, Mahlo Weft Straightener, 6 Cells, Horizontal Clip Chain 8 Compartments, Steam Heated, Mahlo Orthomat Humidity Controller Exit with 2 Cooling Cylinders, Mahlo Weft Straightener, 4 Cells Delivery to Plaiter or Batcher Available: end 2012, still in production USD 180,000.00 CFR Major Sea Port Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 7459 Terms: SEE DESCRIPTI ON Cost: 0 http://finatexinternational.com/pictures/7459.zip Babcock Tenters/ Stenters
Transcript

Machinery Listings Finatex International: Please ask for details at: [email protected]

Finishing

Artos

Tenters/ Stenters

-ARTOS /BABCOCK STENTER machinewidth 3200 mm, with n.6 chambers , diathermic oil heated , pins and clips , Artos enterand delivery mangle , Bianco weft straightener , yoc 1984

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 13839 Terms: -Cost: 0 Pictures not available

-STENTER ARTOS, year 1979, 6 chambers, w.w. 3400 mm, oil heating, padder

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 14237 Terms: -Cost: 0 Pictures not available

-Stenter ARTOS, 3.200mm, 4 chambers, termal oil, pin horizontal chain, padder, manual weft straightener, glue selvedges+vacuum,folding system and small roll, 1986.

Location:Europe

SPECIAL PRICE: 65.000,00€ F.O.T.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 14450 Terms: SEE DESCRIPTION

Cost: 0 http://finatexinternational.com/pictures/14450.zip

Revized:

1ARTOS/BABCOCK Tenter Frame, Model 5301, Year 1986Working Width 3.2m, Impregnation Foulard, Model 5880, with SqueezerSteaming Unit, Mahlo Weft Straightener, 6 Cells, Horizontal Clip Chain8 Compartments, Steam Heated, Mahlo Orthomat Humidity ControllerExit with 2 Cooling Cylinders, Mahlo Weft Straightener, 4 CellsDelivery to Plaiter or BatcherAvailable:end 2012, still in productionUSD 180,000.00 CFR Major Sea Port

Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 7459 Terms: SEE DESCRIPTION

Cost: 0 http://finatexinternational.com/pictures/7459.zip

Babcock

Tenters/ Stenters

-BABCOCK STENTER WW 3200MM YEAR 1998 WITH 2 WASHING COMPARARTMENT BABCOCK ARTOS WET-TEX, 3,20M WORKING WIDTH, Y.O.M. 1998, CONSISTING OF:OPEN-WIDTH WASHING MACHINE WET-TEX WITH 2 WASHING COMPARTMENTS, 15,5M AND 10M CLOTH CAPACITY, EACH WITH SQUEEZER2-ROLLER FOULARD BABCOCK, TYPE 5805WEFT STRAIGHTENER MAHLO ORTHOMATSTENTER BABCOCK/ARTOS, 7 BAYS, HORIZONTAL CLIP/PIN CHAIN, GAS-HEATED, ENTRY BAY 3STEAMING DEVICEPLAITERBATCHING DEVICEHEAT RECOVERY BRÜCKNER ECO-HEAT 12L/L

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 12522 Terms: -Cost: 0 Pictures not available

-We have 5 chambers 340 cm BABCOCK stenter,oil heated,pin+clip 1995 yoc,kusters dye padder + 2 chambers washing in entrance,2 chambers pre dryer.

PRICE:320.000 USD EX.WORK

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 15555 Terms: SEE DESCRIPTION

Cost: 0 http://finatexinternational.com/pictures/15555.zip

1 BABCOCK Tenter Frame, Model 5301, Year 1986, Working Width 2,3 mFoulard, Clip Chain, 8 Comp. Oil Heated

Price:USD 160,000.00 lot CFR

Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 7241 Terms: SEE DESCRIPTION

Cost: 0 http://finatexinternational.com/pictures/7241.zip

-BABCOCK1998STENTERwidth 2,60 En - 6 chamber leaning chain,pin, heating with oil, mahlo+fular

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 16012 Terms: -Cost: 0 Pictures not available

Brueckner

Tenters/ Stenters

-1 BRUCKNER stenter year 2001, max. working width 3200 mm, horizontal combined chain pins/clips, 8 bays, 2x8 gasburners, 4x8 ventilators, input length 5 meter with photocells E+L and 3-finger-uncurlers and extensioning rollers, with at INPUT : J-box + brushing device + WEKO humidification + chemical padder BRUCKNER 2 bowls + Autofoam Datacolor coating device + Mahlo RFMC10A with 6 heads, and at EXIT : Mahlo weft-reading device + plaiter + batching on A-frame.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 12942 Terms: -Cost: 0 Pictures not available

-1 BRUCKNER stenter year 2001, max. working width 3200 mm, horizontal combined chain pins/clips, 8 bays, 2x8 gasburners, 4x8 ventilators, input length 5 meter with photocells E+L and 3-finger-uncurlers and extensioning rollers, with at INPUT : J-box + brushing device + WEKO humidification + chemical padder BRUCKNER 2 bowls + Autofoam Datacolor coating device + Mahlo RFMC10A with 6 heads, and at EXIT : Mahlo weft-reading device + plaiter + batching on A-frame.

Price: EUR 425.000/- CNF VALUE

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 13187 Terms: SEE DESCRIPTION

Cost: 0 Pictures not available

-1 STENTER BRUCKNER MACHINE WIDTH 3.60M YEAR 1985

Details: 4 ChambersGas System

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 13685 Terms: -Cost: 0 Pictures not available

-BRUCKNER STENTER FRAME WW 36000MM YEAR 2002 GAS YEAR: 2002MODEL: SPLIT-FLOWROLLER WIDTH: 3800MWORKING WIDTH: 3600MM7 CHAMBERS NATURAL GAS HEATED MECCANICA TESSILE I-SCRAY FOR NON STOP OPERATION AT THE ENTRANCE AND EXITBETA PADDER TYPE FPC-3 TAV-3800MAHLO WEFT STRAIGHTER AT ENTRY WITH 6 READING SENSORSOPERATOR'S PLATEFORMOVERHEAD CONTROL BRIDGE WITH TEMPERATURE CONTROLS AND MONITORS FOR QUALITY CONTROL WATCHSET OF GUIDE ROLLER AND SCROLL ROLLERS FABRIC ENTRY TO CHAIN WITH 3 FINGER UNCURLERSE&L OPTOELECTRIC EDGE GUIDING CAMERAS TYPE FR1501ENTRY PRE-ARRANGE FOR WOVEN AND KNITTED FABRICSMOTORIZED BRUSHES FOR PIN AND CLIPS CLEANINGSTAINLESS STEEL CENTRAL SUPPORT FOR SENSETIVE FABRICSPRE-STEAMING TRAYEACH CHAMBER WITH 2 BRUCKNER ECLIPSE HIGH PERFORMANCE BURNERS, 240 KW EACHDOUBLE VENTILATION IN EACH CHAMBER TYPE SPLIT FLOWCOOLING ZONE AT EXIT WITH FAN AND MOTORMAHLO WEFT STRAIGHTNER AT EXIT WITH 4 READING SENSORSAIRING ZONE AT EXITEXIT WITH BIG BATCH WINDING UNITINVERTER PLC CONTROLS, 380V, 50HZHEAT RECOVERY AND AIR TREATMENT SYSTEMSUPERB CONDITION. MAINTAINED ONLY WITH GENIUN BRUCKNER PARTS

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 14495 Terms: -Cost: 0 Pictures not available

-1 Bruckner mini stenter, w.w. 260 cm, 7 m long, yoc. 1987,

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 14988 Terms: -Cost: 0 Pictures not available

-1 BRUCKNER stenter year 2000, rollerwidth 3600mm ww 3400mm, 5 bays gasheated, burners renewed in and machine overhauled in 2011, vertical pinchain, long entry 5 meter with Tendematic uncurlers, Corino guiding system, with at entry : 2 padders each 2 bowls + Mahlo RFMC12A + washing compartment with 4 perforated drums, exit with edge-cutting and batching motion and plaiter, machine suitable for woven as well as for knitted fabrics.

Price: Euro 275.000/-- CNF, NET to us.PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 14964 Terms: SEE DESCRIPTION

Cost: 0 http://finatexinternational.com/pictures/14964.zip

-BRUCKNER STENTER BRAND NAME : BRUCKNER YOC : 1997 WORKING WIDTH : 2.60 cmROLLER WIDTH:2.90cm 6 CHAMBERS PIN TYPE GAS HEATED WITH GLUEING ,CUTTING AND SUCTION DEVICE . FOR KNITTED FABRIC . PADDER ( FULLARD ) : ORGINAL BRUCKNER WITHOUT WEFT STRAIGHTNEREXCELLENT CONDITION , LYING IN FACTORY NOW. STOPPED 3 MONTHS IN FACTORY .PRICE:90.000 EUR FOB

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 15731 Terms: SEE DESCRIPTION

Cost: 0 Pictures not available

--Maker : Bruckner , Germany.-Yom : 2,000 yeare.-Roller width :3,600 mm.-Working width :3,400 mm.- Nos, of chamber : 8 chambers.- Gas heating system.-Horizontal Pin chain type.-* Composed of following parts.

-Bianco entry , Model Linea entrate ram.-Traction unit with compensator,-J-Box accumulator with traction roller.-Dogal centering unit with motorized spanders roller.-Foulard 2 rollers with pneumatic pressure.-VDTEX weft-straightener with 8 heads,-E+L digital introduction, automatic overfeed.-6 meters entry.-Bruckner eclips burners.-Automatic regulation of chain width.-Cooling units.-MAHLO humidity control.-Exit by BIANCO, model linea Uscita Ram.-Big batcher for A-frame with double position.-AC inverter controlled.-Total length 58 meters.

-Location : South Europe.-Available : immediately.-Condiotions : stand on mill floor.

If interested, please contact us for more details.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 15909 Terms: -Cost: 0 http://finatexinternational.com/pictures/15909.zip

--Maker : Bruckner, Germany-Yom: : 2008 years.-Roller width : 3,000 mm.-Working width : 2,800 mm.-Nos, of chamber : 8-Heating source : thermal oil.-Chain system : Horizontal pin chain conveyer.-Complete set with standard accessories.

A, Entrance ( texter guider )B, Two bowl padding mangle.C, Weft-straghtner ( Mahlo, Italy )D , Rail guiderF, Aigle coating head.G, operating control board.H, 8 set x Hot air circulationI, Air cooling device.J, water cooling cylinder.k, plate device and batching device .l, control panel

-Location : China-Condition : stand on mill floor.( This stenter is running whenever received a order, accordingly, The actual running time of this stenter is 3 years only ( 8 hour /day)--Available : immediately.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 16234 Terms: -Cost: 0 http://finatexinternational.com/pictures/16234.zip

Dilmenler

Tenters/ Stenters

-DİLMENLER STENTER

Year ----------------2007Wıdth--------------3400mmHeating----------- gasBorner brande ---teplix Chambers --------8 unıtSquessıng fularPin and chaın

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 14671 Terms: -Cost: 0 http://finatexinternational.com/pictures/14671.zip

-STENTER DILMENLERMODEL YEAR 2007W.V 3400 MM8 CHAMBERSGAS AND GAS SYSTEMSMAHLO AND PADDERPIN AND CLIPSSELVEDGE CONTROL ERLATH LEIMEROUTLET UN IT BIG BATCHING AND PLAITER EX MİLL 155.000 EURO

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 14934 Terms: SEE DESCRIPTION

Cost: 0 Pictures not available

EH-HWA

Tenters/ Stenters

-: Used EH- Wha Gas Stenter.

-Maker: EH-Wha, Korea-Yom :April, 2,008 years.-Model: Platinum-Serial number: 10ch-2BM-TOH-PHR-3400.-nos ,of chamber: 10-Roller width:3,600 mm.-Working width:3,400 mm.-Horizontal chain pin type.-Machine speed: 80~,100m/min-Gas heating system ( burner,.Maxon,USA)-electric power 3 Phase x :60hz x 380 v.- Inverter driving system.

1, entrance : a, guide ring B, Tension bar C, textar guider D,2 bowl padding mangle 2, Auto Overfeed :a ,electronic control type overfeed device B ,Rail guider with automatic position control dectector. C, selvedge uncurler. D, over feed tensioner. E, selvedge keeper. F, Rail safety device. G ,Screw expansion roll H, Touch screen T.V monitor system.3, Dry & Heat Setting Chamber :a, 10 x Hot air circulation Fan & motor B, Air floating system hot air injection nozzle C ,heating exchanger. D, exhaust duct with fan motor. E, 10 x gas burner ( Maxson, USA) 4, Cooler : air cooling fan & nozzle 5, Main Drive: a ,Driving arrangement. B, 2 x bowl cooling cylinder. C, Plaiting down device 6, Main control panel.

-Condition: Now running-Available : immediately-Location: Korea

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 12101 Terms: -Cost: 0 http://finatexinternational.com/pictures/12101.zip

Ewha

Tenters/ Stenters

-Ewha Stenter machine -Brand : Ewha – Korea-Yom: 1998 (Fully reconditioned 2004)-Roller width:2,600 mm.-Working width: 2,400 mm.-Chamber No: 8 chambers-Horizontal pin type chain.-Thermo-oil heating method.-complete set with standard accessories. * Consisted of following parts. •entrance with guide roller.•2 bowl padding mangle.•Control screen board.-2 bowl cooling cylinder. - plaiter.-Inverter system-Control panelMotor Year : 2004 (all) *Quantity: 1 set.Condition: Running Location: VietnamPrice: US$ 40,000.00/set – Ex mill.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 9573 Terms: SEE DESCRIPTION

Cost: 0 Pictures not available

Famatex

Tenters/ Stenters

-FAMATEX STENTERFAMATEX STENTER,3.20M, 6 CHAMBERS, HORIZONTAL CHAIN WITH PIN AND CLIPS, PADDER WITH 3 BOWLS, WEFTSTRAIGHTENER MAHLO WITH 8 HEADS, CENTRAL BURNER LAUDATI(FROM 2004), OUTLET BY FOLDER AND BIG ROLL.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 12526 Terms: -Cost: 0 Pictures not available

Harish

Tenters/ Stenters

-TypeStenterProducerHarishYOC2000Production No.:1370 5 PSECOND HAND MACHINESDimension ( mm )40.000 x 8.200 x 3.000Working width ( mm)3.200Drying mediumGasMachine contains:1) Equipment for drawing-in and balancing of fabrics BIANCO2) Fular for coating of finish3) weft straightener MAHLO type RFMC – 10 A4) 5- drying chambers with WEISHAUPT turner (output 6O – 335 kW,press 15 – 500 mbar5) wind of arm6) Kitchen for preparing of finishspeed 5-50 m/minelektricity : 220/380 V, 50 HzThe machine worked up to the July 2012 and is at very good condition.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 10267 Terms: -Cost: 0 http://finatexinternational.com/pictures/10267.zip

-TypeStenterProducerHarishYOC2000Production No.:1370 5 PDimension ( mm )40.000 x 8.200 x 3.000Working width ( mm)3.200Drying mediumGasMachine contains: 1) Equipment for drawing-in and balancing of fabrics BIANCO 2) Fular for coating of finish 3) weft straightener MAHLO type RFMC – 10 A 4) 5- drying chambers with WEISHAUPT turner (output 6O – 335 kW,press 15 – 500 mbar 5) wind of arm 6) Kitchen for preparing of finish speed 5-50 m/minelektricity : 220/380 V, 50 HzThe machine worked up to the July 2012 and is at very good condition.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 12959 Terms: -Cost: 0 Pictures not available

Icomatex

Tenters/ Stenters

1 ICOMATEX stenter year 2010, working width 3200 mm, 5 compartments, vertical pinchain, gasheating, Mahlo weftstraightener RFMC-76 renewed in 2010, Babcock padder 2 cylinders renewed in 2010

Reference: 4119 Terms: EACH, EURO, CNF

Cost: 250,000 http://finatexinternational.com/pictures/4119.zip

IL Sung Sun

Tenters/ Stenters

-ILSUNG STENTER YEAR 2013. SL/ 0050ILSUNG 'SUN-SUPER' STENTERMODEL : ISST-8GPNO.OF CHAMBER : 8ROLL WIDTH :3,600MMWORKING WIDTH : 3,500MM MAX.HEATING SOURCE : DIRECT GAS HEATING (2 BURNERS/CHAMBER)CHAIN TYPE : HORIZONTAL PIN ONLY TYPEMFG YEAR : 2013

INCLUDING;1) 2BOWL PADDER MANGLE2) AIR DANCER & COMPENSATE DANCER3) WEFT STRAIGHTNER (DAEIL, KOREA) WITH TOUCH SCREEN4) CENTER CONVEYOR5) ILSUNG DECURLER6) EXHAUST INVERTER CONTROL7) PLAITING & BATCHING WIDTH BANANAS ROLL & TRAVERSE8) GUIDER ROLLERS FOR DOUBLE DECK

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 14953 Terms: -Cost: 0 Pictures not available

Kleinewefers

Tenters/ Stenters

-KLEINEWEFERS Bicoflex FQ 245 cold-winding dyeing machineProducer: Kleinewefers KTM, GermanyType BICOFLEX FQ245Year: 1999 ; Working width: 2600 mm

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 9314 Terms: -Cost: 0 Pictures not available

Kranz

Tenters/ Stenters

-Krantz Oil Stenter.

-Maker: Krantz, Germany-Yom: 1994 years.-nos,of chamber: 6-Serial number:1033140-Roller width:3,000 mm.-Working width: 2,800 mm.-Vertical chain pin type.-thermo oil heating system.-with Tandermatic device.-Selvedge cutting device.-electric power :60hz x 220 v.

1, entrance texture guider( Bianco) 2, 2 bowl padding mangle :Babcock,1994, type:5805 3, “ J “ box 4, texture guider. 5, Screen control board. 6, 6 dry chamber 7, cooling fan 8, Down Plaiter 9, control panel.

-Condition: Now running-Available : end of December,2012.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 10630 Terms: SEE DESCRIPTION

Cost: 0 Pictures not available

-1 KRANTZ stenter ww 3000 mm, model K10 year 1989 , vertical pinchain, 6 compartments, heating by thermo-fluid, with boiler for thermo-fluid CSC model LM15 - 1.500.000 Kcal with fuel burner

Price: Euro 105.000/--CFR major seaport

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 11580 Terms: SEE DESCRIPTION

Cost: 0 http://finatexinternational.com/pictures/11580.zip

-KRANTZ STENTER WW 3000 MM, MODEL K10 YEAR 1989 , VERTICAL PINCHAIN, 6 COMPARTMENTS,HEATING BY THERMO-FLUID, WITH BOILER FOR THERMO-FLUID CSC MODEL LM15 - 1.500.000 KCAL WITH FUEL BURNER.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 12536 Terms: -Cost: 0 Pictures not available

Kuesters

Tenters/ Stenters

-Thermo”sol dyeing machine roller width 3400mm WW 3200mm yoc 2005 No 1” high entry with j.scray in cloth guider E+L type 20.20 No 2” kuster dyeing pader with cooling cylinder No of 2 pader of type cooling jacket Automatic total colors dosing system by dosing pump with colors tank total pipe Line By s”s & PLC control with touch screen with j.scray and fabric over feeding device No 3” Inferred make maxon No of 2 natural gas heat system I”R” design type by mettle Matrix total heat control system by operate PLC control by kuster dyeing pader With thermo”sol machine No 4” If they you are working by independently dyeing pader and I”R” only by fabric Dyeing process so machine is facilitate by original system the batcher drive & Running the machine without working by curing chamber. No 5” Machine heat sources by thermo oil 2 chamber curing system & 2 chamber hot Flue uniform “machine humidity control by mahlo system machine at exit j.scray “two cooling cylinder by S”S diameter 800mm machine exit folder book and batcher drive machine. Machine is like new.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 15566 Terms: -Cost: 0 http://finatexinternational.com/pictures/15566.zip

Monfort

Tenters/ Stenters

01 Monfort stenter frame type Montex 5000 3200 mm working width y.o.c 2002 4 chambers heated by indirect diatermic oil ( heating system can be also by gas just changing the main boilerBianco expander at inlet positionFoulard Monfort E & L centering device Mahlo weft straightner Pleva gravimat to measure the fabric weight gr/m2Orizontal needle chaine

Location: SchengenDelivery: ReadyMachines: On Mill floorPrice: on requestPictures: attached

Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 8145 Terms: -Cost: 0 http://finatexinternational.com/pictures/8145.zip

--Maker : Monforts-Year : 1994-Q'nty ; complete 1 set-6 chamber-Width : 180" ( 4,600 mm)-Thormo oil -Pin type-Normal Running now.*************************************************************-Picture : Attached file.-Inspection : Available-Delivery : After receive advance or L/C, We can loading within max 1 month.-Picture : Attached file.-Etc 1) we need 10 container( 40 ft ) for loading 2) If possible, Pls decide asap. -Payment term : Advance 30% by T/T and 70% Irrevocable L/C at sight-Location : Korea

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 14517 Terms: -Cost: 0 http://finatexinternational.com/pictures/14517.zip

-****THIS MACHINE IS IN FIRST CLASS CONDITION****MONFORT STENTER, MODEL: MONTEX, WW: 3.200M, YEAR 1995PRE TENSION ENTRY WITH E+L CENTRALISING & SCROLL ROLLERSMAHLO AUTOMATIC WEFT STRAIGHTNER, MODEL: ORTHOMAT FMC-9H, WEFT DETECTION AND CONTROL UNITMAHLO FMC-9, WEFT-LINE LOGGING SYSTEM TYPE RVP-2 YEAR 1996MAHLO TEXTOMETER, MODEL: RMS MODULE, TYPE EMC-9R, MOISTURE MEASURING AND CONTROL UNITMONFORTMATICMAHLO ANTISTAT TYPE: AMW-2, HIGH-EFFICIENCY IONIZATION ANTISTATALL CONTROL PANELS MOUNTED IN ONE AIR CONDITIONED ENCLOSUREMONFORT 2 BOWL FINISHING PADDEREDGE GLUEING DEVICEEDGE CUTTING DEVICETENSIONLESS CONTROL FOR KNIT AND WOVENTANDERMATIC EDGE UNCURLER AND E+L FR15 GUIDERHORIZONTAL PIN & CLIP CHAIN7 HEATING CHAMBER BY THERMO OILCOOLING ZONEEXIT WITH PLAITER AND BATCHER

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 13730 Terms: -Cost: 0 Pictures not available

-MONFORT MONTEX STENTER WW 3200MM YEAR 2006 6 CHAMBER OIL HEATEDMONFORTS TENTER FRAME, MODEL MONTEX , YEAR 2006, WW 3.2 M, ROLLER WIDTH 3.4 M KUSTERS FOULARD, MODEL 222.17.3200, WITH SQUEEZING UNIT, HORIZONTAL PIN CHAIN 6 COMPARTMENTS, OIL HEATED, EXIT WITH 2 COOLING ZONES (FANS)

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 14493 Terms: -Cost: 0 Pictures not available

-Maker : Monforts-Year : 1994-Q'nty ; complete 1 set-6 chamber-Width : 180" ( 4,600 mm)-Thormo oil -Pin type-Normal Running now. 1) we need 10 container( 40 ft ) for loading

Payment term : Advance 30% by T/T and 70% Irrevocable L/C at sight-Location : Korea

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 14449 Terms: -Cost: 0 http://finatexinternational.com/pictures/14449.zip

-Model Monforst Year 2007Working Width 3.2 m, Roller Width 3.4 mFeed from A-Frame, High EntryE&L Fabric GuidersKusters Impregnation Foulard, Model 222.17.3200, with Squeezing UnitCorino Weft Straightener, Model KM2-MG6, 6 CellsHorizontal Pin Chain6 Compartments, Oil HeatedExit with 2 Cooling Zones (Fans)Delivery to PlaiterControls Qualitex

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 14732 Terms: -Cost: 0 http://finatexinternational.com/pictures/14732.zip

Revized

1 Monforts Tenter FrameModel MontexYear 2006Working Width 3.2 m, Roller Width 3.4 mFeed from A-Frame, High EntryE&L Fabric GuidersKusters Impregnation Foulard, Model 222.17.3200, with Squeezing UnitCorino Weft Straightener, Model KM2-MG6, 6 CellsHorizontal Pin Chain6 Compartments, Oil HeatedExit with 2 Cooling Zones (Fans)Delivery to PlaiterControls Qualitex Available:Immediately Location: Mediterranean

USD 380000 cfr

1 Kusters CalanderModel 213.60 - 2800Year 1987Working Width 2.8 m, Roller Width 3.0 mE&L Fabric GuidersMetal DetectorTop Cylinder SteelMiddle Cylinder RacolonBottom Cylinder CottonPressure 60 tonsOil Heated Available: Immediately Location: Mediterranean

1 Monforts SanforizerModel FF KSG-2Year 1986Working Width 2.8 m, Roller Width 3.0 mFabric ReserveEntry UnitE&L Fabric GuidersJ-SchraySteaming ChamberMahlo Weft Straightener, 6 CellsMini Tenter, Model TMSBHorizontal Clip ChainSanforizing RubberPalmer, model FK/SG-2, Diameter 2.0 mCooling CylinderJ-ScrayExit UnitDelivery to Batcher or Plaiter Available: Immediately Location: Mediterranean

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 13971 Terms: SEE DESCRIPTION

Cost: 0 http://finatexinternational.com/pictures/13971.zip

-Monforst STENTER(FOR WIDE FABRIC)

Oil heated380 cm ww4 chambersFor wide fabric and especially for carpet process.1988 yoc.Horizental chain.Weftpadder

PRICE:80.000 eur/each EX.WORK

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 15059 Terms: SEE DESCRIPTION

Cost: 0 http://finatexinternational.com/pictures/15059.zip

-1 Monforst Montex 8G/K – 320 Cm Stenter MachineLines for processing of Curtain – Tensile OvenMontex 8 G/K , Hot Oil Heaters , Horizontal Pin Chain , Mahlo Weft Straightener , With 4 Cabin , Sistem Latch Needle , Machine No-63310 , Year 1988 , with Display : informatics monfor -matic

2 BOILER OIL HEATER-KONUS KESSEL

1 x Oil Boiler Make KONUS KESSEL+ Oil Tank 150 GL-Year 1987 , -Type KH 1,25/25 , -allowable operating pressure: 10 bar-Operating temperature: 300 C degrees- Minimum flow rate: 95 m 3 / h - Power : 1453 kW- Minimum flow rate: 95 m 3 / h - Manufacturer Nr : 433072- Model Features: ZU 250/1- Factory - No. 1789500 Location : Yugoslavia Delivery : Immediately

Price : in Complete 80.000 euro loaded in container

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 15233 Terms: SEE DESCRIPTION

Cost: 0 http://finatexinternational.com/pictures/15233.zip

-Monfort stenter machine yoc 2006 Monfort stenter machine yoc 2006 8 chamber roller with 3400mm WW 3200mm horizontal pin clip chain heat sources by thermo flued machine high entry with j.scray over feeding roll 2 bowl pader mangle type m 15 & infrared duble l by maxsone type matle matrix with Eveck system mahlo weftstrainter 8 opitical I machine over feeding brushing eadhe control by E+L photo cell and exit side mahlo artho met control heat sources control by 3 way motorize valve with pleva humidity control No of 2 exost fan machine folder book batcher with exit j.scray with cooling cylinder

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 15564 Terms: -Cost: 0 http://finatexinternational.com/pictures/15564.zip

-Monfort stenter machine 2005Monfort stenter machine yoc 2005roller width 3400mm WW 3200mm type horizontal pin clip chain entry 3mt 8 chamber heat of sources thermo oil entry j.scray pader mangle 2 bowl mahlo weftstrainter entry & exit arthomet control machine with evake system over feeding brushing twin ear heat comburshan system machine exit side j.scray folder book and batcher system.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 15565 Terms: -Cost: 0 http://finatexinternational.com/pictures/15565.zip

-STENTER MONFORTS "MONTEX 5000" , 5 chambers (2 bays year 1997 and 3 bays year 2010) - combined chain pins-clips, 5 gasburners Maxon, axial rolling unit at exit, with STORK foam-generator FPC year 1996 cap. 600 liter

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 15700 Terms: -Cost: 0 Pictures not available

-Monforts StenterYoc 1989Width 3400 6 chambers Gas heated Pin clip horizontal chainMahlo Weft StraightnerMonforts PadderInfra Red Monforts on EntryExit With Batcher

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 15733 Terms: -Cost: 0 Pictures not available

-STENTER MONFORS MONTEX-----------------------------------------2 unitsYear 1996Type montex 8 F twin airOil heating systemSerial no : 45 T 67261Width :3000mmWorking width:2900mmEntry J boxKusters padderWeft straighter :MAHLO8 chamberHorizantal pin &clipsTwo air cooling drumsFabric accumulator---double batcher

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 15897 Terms: -Cost: 0 Pictures not available

-STENTER MONFORS MONTEX-----------------------------------------2 unitsYear 1996Type montex 8 F twin airOil heating systemSerial no : 45 T 67261Width :3000mmWorking width:2900mmEntry J boxKusters padderWeft straighter :MAHLO8 chamberHorizantal pin &clipsTwo air cooling drumsFabric accumulator---double batcher

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 16340 Terms: -Cost: 0 Pictures not available

Monti

Tenters/ Stenters

-COMPARTMENTS (2 m EACH ONE) VERTICAL RETURN CHAIN SINGLE LAYER STENTER MADE BY MONTI TYPE MONTIRAMA FOR KNITTED FABRIC, year of construction 2000, roller width 2.600 mm for max. fabric width 2.400 mm, steam heating of the dryer, suitable just for open width knitted fabric, 01 pair of gluing devices and 01 pair of selvedge trimming devices.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 14077 Terms: -Cost: 0 Pictures not available

Multiple

Tenters/ Stenters

-ALL 3 FRAMES FOR A TOTAL PRICE OF USD 250,000.00LOADED TO YOUR CONTAINERS, USA 1 DR Kenyon Pin Tenter 280cm Working Width Year 1993 Menzel Two Roll Feed with J Scray Kusters Dye Pad type 222.53 Mascoe Coater 100” Pre Dryer 8 Zone Gas Fired Oven Menzel 3 Roll Automatic Batcher Controls 1 DR Kenyon Pin Tenter 400cm Working Width Year 1993 Menzel Two Roll Feed with J Scray Coating Unit with Foam Generator 5 Zone Gas Fired Oven Menzel 3 Roll Automatic Batcher Controls 1 Babcock/Artos Tenter Frame 320cm - (Refurbished / 1998) consisting of: Menzel J Scrays One Skyed Turning Roll, 6” diameter with E&L air guiders, Babcock Pad / 134” wide Vacuum slot, 128” wide Mt. Hope Weftrol Weft Straightener, Windsor & Jerauld Clip Chain Set E&L 2 finger uncurlers, Babcock Oven / 60’ long 6 Burners12 fans New York Blower A-frame winder, Birch Brothers single blade slitter Year 1998 Menzel 2 roll compensator,134” Type 134CP Year 1990 Artos 4 Section Control Panel with 6 zone control Your consideration and prompt response will be most appreciated.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 12261 Terms: SEE DESCRIPTION

Cost: 0 Pictures not available

Reggiani

Tenters/ Stenters

--REGGIANI STENTER FRAME- REYNOLD-Reggiani Macchine -Model Reynold-Working width 2500 mm-Clips and pins chaini-6 compartments Gas heating-Beta impregnation foulard with squeezing unit-Mahlo weft straightener -Exit roll

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 10571 Terms: -Cost: 0 Pictures not available

Stentex

Tenters/ Stenters

-STENTEX

1 SET , 1995 MODEL, STENTEX MARKA, 320 CM WIDTH, 6 CHAMBERS, HEATING WITH NATURAL GAS , MAHLO FULARD,VERTICAL CHAIN PRICE : 150.000 EUR.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 9062 Terms: SEE DESCRIPTION

Cost: 0 http://finatexinternational.com/pictures/9062.zip

- 1 Stentex Stenter Frame Type Stentotherm 3300 Year 1996 Working width 1800 mm Roller width 2000 mm 9 Compartments vertical Pin Chain gas heated with MAXON Burners with 2 Foulards with MAHLO Weft straightener

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 12336 Terms: -Cost: 0 Pictures not available

-•STENTEX 1995 MODEL 320 WORKING WIDTH 6 CHAMBERS HEATING WITH NATURAL GAS MAHLOFLOUARD VERTICAL CHAIN-150.000 EURO EX.WORK

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE FURTHER: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Reference: 11096 Terms: SEE DESCRIPTION

Cost: 0 http://finatexinternational.com/pictures/11096.zip


Recommended