SE
CT
ION
6
SMD and DIL •
EMI Noise Suppression •
Data and Signal Line Filters •
Common Mode Interface Chokes •
Current CompensatedEMI Noise Suppression Chokes
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
ntmagnetics
nuvotem
Sales & Marketing, Design and Manufacturing Facilitieshttp://www.talema-nuvotem.com
IrelandNUVOTEM TEO.CrollyCo. DonegalTel: Int. + 353 74 - 954 8666Fax: Int. + 353 74 - 954 8139Email: [email protected]
GermanyTALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 - 841 00 - 0Fax: Int. + 49 89 - 841 00 25Email: [email protected]
Eastern Europe &Czech RepublicNT MAGNETICS s.r.o.Chebská 27322 00 PlzeñTel: Int. + 420 377 - 338 351Fax: Int. + 420 377 - 338 350Email: [email protected] Site: www.ntmagnetics.cz
IndiaTALEMA ELECTRONIC PVT. LTD.Opposite the SIDCO Industrial EstateGins Towers4/5S.H/1, Omalur Main RoadSalem - 636 004, Tamil NaduTel: Int. + 91 427 - 244 1325Fax: Int. + 91 427 - 243 0034E-mail: [email protected] Site: www.talemaindia.com
Common Mode Interface Chokes - DIL and SMD
2
TALEMA PROFILEFounded in 1975, The TALEMA International Group hasestablished itself as a world leader in the manufacture oftoroidal transformers and related magnetic components. Ourstrong technical engineering expertise has contributed to thegrowth of our current workforce to over 1,200 employees inmanufacturing locations in the Czech Republic and India.
Over the years The Talema Group has succeeded indesigning, producing and delivering in excess of 50 milliontransformers to its customers. The recent incorporation ofxDSL technology into our extensive range of Telecom andLAN magnetics offerings, such as ISDN, 10Base-T, Ethernettransformers for 100/1000Base-T, has broadened our marketoffering to an even higher level.
QUALITYThe TALEMA Group has a total commitment to quality andemploys Lean Six Sigma training for engineering, productionand administrative staff to help achieve a goal of zero defects.All facilities maintain very stringent Quality Control and QualityAssurance procedurees and are certified to and manufacturein accordance with ISO-9001:2000, TS-16949:2002 andmeet a broad range of International Standards including UL,VDE, IEC, and EN.
sekohCecafretnIedoMnommoCDMSdnaLID
seireS ecnatcudnIegnaR
rebmuNseniLfo
gnitnuoMelytS
stcatnoC.oNhctiP&
aerAdraoB.xaM)mm(tHxLxW
teehSataD.rNegaP
eniLataDXXX-2-JTC Hm7.4-Hμ11 2DMSdaeL"J" 72.1x4 3.3x3.3x0.5 4-3
eniLrewoPS-XXX-2-JTC Hμ15-Hμ11 2
eniLataDXXX-2-JLC Hm74-Hμ5 2
DMSdaeL"J"45.2x4
8.4x4.5x9.86-5
eniLrewoPS-XXX-2-JLC Hμ15-Hμ6 2
XXX-4-JLC Hm21-Hμ11 4 72.1x8 7
XXX-2-JMC Hm74-Hμ5 2DMSdaeL"J"
45.2x43.5x8.5x0.9
9-8
XXX-4-JMC Hm21-Hμ5 4 72.1x8 01
XXX-3-JFC Hm7.4-Hμ42 3DMSdaeL"J"
45.2x6 2.7x8.7x5.1111
XXX-4-JFC Hm7.4-Hμ33 4 45.2x8 2.7x6.9x5.11
XXX-2-JSC Hm74-Hμ11 2
DMSdaeL"J". 45.2x6 5.4x6.6x0.8
31-21XXX-3-JSC Hm21-Hμ11 3
XXX-4-JSC Hm21-Hμ11 4 45.2x8 5.4x41.9x0.8
XXX-2-JCC Hm07-Hμ62 2DMSdaeL"J"
26.7x40.9x0.11x0.41 51-41
XXX-4-JCC Hm85-Hμ62 4 45.2x8
XXX-JDC Hm07-Hm0.1 2DMSdaeL"J"
61.01x47.11x2.31x6.61
81-61
XXX-JQC Hm09-Hm0.1 4 45.2x8
XXX-FDCHm07-Hm0.1
2 THT-talF61.01x4
0.11x5.21x0.41
XXX-VDC 2 THT-lacitreV 5.41x0.41x0.9
XXX-FQCHm09-Hm0.1 Hm09-Hm0.1 Hm09-Hm0.1 Hm09-Hm0.1
4 THT-talF45.2x8
0.11x5.21x0.41XXX-VQC 4 THT-lacitreV 5.41x0.41x0.9
eniLataDXXX-VKC Hm86-Hμ021 2THT-lacitreV 80.5/45.2x4 6.71x2.51x4.7
91eniLrewoPS-XXX-VKC Hm74-Hm7.4 2 02
XXX-61-JOC Hm0.5-Hμ42 61 DMSdaeL"J" 72.1x04 0.6x0.82x2.61 12E61-XXX-JUC
Hm7.4-Hμ42
4
DMSdaeL"J" 72.1x61 0.6x8.21x6.9 32-22
C61-XXX-JUC 6
D61-XXX-JUC 6
A61-XXX-JUC 8
B61-XXX-JUC 8
sretliFeniLataD 61ot2 DMSdaeL"J" suoiraV 62-42
snoisnemiDdnagnigakcaPleeR&epaTdnaebuT 82-62
sevitatneserpeRselaSdezirohtuAdnasnoitacoLgnirutcafunaMamelaT 92
NALfoenilevisnetxes'amelaTrofsnoitacificepslacinahcemdnalacirtceledeliatedrofetisbewruotisiVmoc.metovun-amelat.www-snoitacilppAmoceleT&tenrehtErofstnenopmoCcitengaM
Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374-954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427-244 1325 http://www.talema-nuvotem.com
ENVIRONMENTAll TALEMA International Group manufacturingfacilities are RoHS compliant and all chokes,inductors and HF components are producedin an EMS facility which is certified to ISO-14001:2004.
(Feb-08)
3
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
CTJ-2 Series • Miniature SMD Common Mode Double Chokes
Electrical Specifications @ 25°CNominal Voltage: 42Vac (50/60Hz), 80VdcOperating Temperature: -40° to +125°CStorage Temperature: -40° to +125°CClimatic category: according to IEC68-1 40/125/56Test voltage between windings: 500 Vrms
Test frequencyNominal Inductance: measured @ 100kHz/20 mVrmsLeakage Inductance: measured @ 100kHz, 100mVrmsTest Equipment: HP4192A
Weight: ~ 0.1 gramPackaging: Tape & Reel
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Surface Coplanarity will be 0.004(0.10) maximum
Features• Miniature, low cost SMD for pick and place compatability while
providing consistent and reliable coplanarity• Extended Operating Temperature Range: -40° to +125°C• Other inductance values and special types for operation at 150°C
ambient are available upon request• High attenuation over a wide frequency range - CAN bus types
to 500MHz• Available in Bifilar and Sector winding (Suffix SE)• Materials: UL94-VO• Manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• Fully RoHS compliant and meets lead free reflow
level J-STD-020C
rebmuNtraPLN
)Hμ(IN
)Am(R UC
)smhOm(VT
)smrV(ataDforebmuN
seniL
snoitacilpparailimisdnasubNACrofgnidniWrotceSES011-2-JTC 11 052 061 005 2ES022-2-JTC 22 052 591 005 2ES033-2-JTC 33 002 062 005 2ES015-2-JTC 15 002 003 005 2
seniLlangiSdnaataDrofgnidniWralifiB011-2-JTC 11 003 061 005 2101-2-JTC 001 003 081 005 2122-2-JTC 022 002 052 005 2174-2-JTC 074 002 083 005 2201-2-JTC 0001 051 066 005 2222-2-JTC 0022 051 048 005 2
33-2-JTC 2 0033 051 0051 005 2274-2-JTC 0074 051 0081 005 2
Dimensions Suggested PadLayout Bifilar (BE)
WindingSector (SE)
Winding
0.069(1.75)
0.050(1.27)
0.031(0.80)
0.236(6.00)
See following page for typical impedance curves
Schematic
1 4
2 3
0.016 x 0.016(0.40 x 0.40)
0° -
8°
0.050(1.27)
0.191 (4.85)
0.205 (5.20)
0.150(3.80)
SE1
510
0.130(3.30)
0.083 (2.10)
4
CTJ-2 Impedance Performance
THE TALEMA GROUP • Magnetic Components for Universal Applications
Impedance Performance CTJ-2 SeriesDouble Chokes with Sector Winding
11μH 22μH 33μH 51μH
Impe
danc
e in
Ohm
s
Frequency in kHz
10,000
1,000
100
10 1,000 10,000 100,000 1,000,000
Impedance Performance CTJ-2 SeriesDouble Chokes with Bifilar Winding
Impe
danc
e in
Ohm
s
100,000
10,000
1,000
100
10
11μH 220μH 1000μH 4700μH
Frequency in kHz
100 1,000 10,000 100,000 1,000,000
5
See following page for typical impedance curves
CLJ-2 Series • Miniature SMD Common Mode Double Chokes
Electrical Specifications @ 25°CNominal Voltage: 42Vac (50/60Hz), 80VdcOperating Temperature: -25° to +85°CStorage Temperature: -40° to +125°CClimatic category: according to IEC68-1 25/85/56Test voltage between windings: 500 Vrms
Test frequencyNominal Inductance: measured @ 100kHz/20 mVrmsLeakage Inductance: measured @ 100kHz, 100mVrmsTest Equipment: HP4192A
Weight: ~ 0.3 gramPackaging: Tape & Reel
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Surface Coplanarity will be 0.004(0.10) maximum
Features• Miniature, low cost SMD for pick and place compatability while
providing consistent and reliable coplanarity• Other inductance values, higher current ratings and special types for
operation at 150°C ambient are available upon request• High attenuation over a wide frequency range - CAN bus types
to 500MHz• Available in Bifilar and Sector (Suffix S) winding• Materials: UL94-VO• Manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• Fully RoHS compliant and meets lead free reflow
level J-STD-020C
Dimensions
BifilarWinding
Sector(CLJ-2-XXXS)
Winding
rebmuNtraP )Hμ(LCO%03-/05+
IN)Am(
LL)Hμ(
R UC)smhOm(
VT)smrV(
forebmuNseniLataD
snoitacilpparailimisdnasubNACrofgnidniWrotceSS060-2-JLC 6 0052 04.0 07 005 2S052-2-JLC 52 008 59.0 011 005 2S015-2-JLC 15 008 00.2 061 005 2
seniLlangiSdnaataDrofgnidniWralifiB050-2-JLC 5 0021 50.0 65 005 2011-2-JLC 11 005 50.0 08 005 2052-2-JLC 52 005 80.0 011 005 2015-2-JLC 15 005 01.0 841 005 2101-2-JLC 001 005 11.0 513 005 2174-2-JLC 074 005 01.0 092 005 2201-2-JLC 0001 005 61.0 572 005 2222-2-JLC 0022 004 21.0 543 005 2274-2-JLC 0074 002 91.0 049 005 2301-2-JLC 00001 002 63.0 0041 005 2302-2-JLC 00002 041 00.1 0081 005 2374-2-JLC 00074 001 00.1 0093 005 2
Schematic
1 4
2 30.039(1.00)
0.100(2.54)
0.213(5.40)
0.394(10.00)
Suggested PadLayout
0.020 x 0.012(0.50 x 0.30)
0.146 (3.70)
0.185(4.70)
CLJ
-2-
XX
XW
k/Y
r
0.100(2.54)
0.287 (7.30)
0.350 (8.90)
0.213(5.40)
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
6
THE TALEMA GROUP • Worldwide Toroidal SpecialistsGermany: Int.+49 89 - 841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 37 - 744 9303 • India: Int.+91 427 - 244 1325 http://www.talema-nuvotem.com
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
CLJ-2 Series • Impedance Performance
Frequency in kHz
Impedance Performance CLJ-2 SeriesDouble Chokes with Bifilar Winding
10 100 1000 10000 100000
Impe
danc
e in
Ohm
s
100,000
10,000
1,000
100
10
2x5μH 2x11μH 2x25μH 2x51μH 2x100μH 2x470μH
2x1.0mH 2x2.2mH 2x4.7mH 2x10mH 2x20mH 2x47mH
Impedance Performance CLJ-2 SeriesDouble Chokes with Sector Winding
2 x 6μH 2 x 25μH 2 x 51μH
Impe
danc
e in
Ohm
s
Frequency in kHz
100 1,000 10,000 100,000 1,000,000
10,000
1,000
100
10
1
7
CLJ-4 Series • Miniature SMD Common Mode Quad Chokes
Electrical Specifications @ 25°CNominal Voltage: 42Vac (50/60Hz), 80VdcOperating Temperature: -25° to +85°CStorage Temperature: -40° to +125°CClimatic category: according to IEC68-1 25/85/56Test voltage between windings: 500 Vrms
Test frequencyNominal Inductance: measured @ 100kHz/20 mVrmsLeakage Inductance: measured @ 100kHz, 100mVrmsTest Equipment: HP4192A
Weight: ~ 0.3 gramPackaging: Tape & Reel
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Surface Coplanarity will be 0.004(0.10) maximum
Features• Miniature, low cost SMD for pick and place compatability while
providing consistent and reliable coplanarity• Other inductance values, higher current ratings and special types
for operation at 150°C ambient are available upon request• High attenuation over a wide frequency range• Materials: UL94-VO• Manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• Fully RoHS compliant and meets lead free reflow
level J-STD-020C
Dimensions
seniLlangiSdnaataDrofsekohCdauQedoMnommoCerutainiM
rebmuNtraPLCO)Hμ(
IN)Am(
LL)Hμ(
R UC)smhOm(
VT)smrV(
forebmuNseniLataD
011-4-JLC 11 006 50.0 08 005 4
074-4-JLC 74 005 10.0 002 005 4
101-4-JLC 001 005 01.0 063 005 4
174-4-JLC 074 005 51.0 082 005 4
201-4-JLC 0001 005 90.0 053 005 4
222-4-JLC 0022 004 60.0 056 005 4
274-4-JLC 0074 003 90.0 019 005 4
321-4-JLC 00021 031 63.0 0022 005 4
Schematic
1 8
2 7
3 6
4 5
0.150 (3.80)
0.189(4.80)
0.016 x 0.016(0.40 x 0.40)
0.287 (7.30)
0.350 (8.90)
3 x 0.050(3 x 1.27) 0.213
(5.40)
CLJ
-4-
XX
XW
k/Y
r
3 x 0.050(3 x 1.27)
0.028(0.70)
0.394(10.00)
Suggested PadLayout
0.197(5.00)
10 100 1000 10000 100000
Impe
danc
e in
Ohm
s
100,000
10,000
1,000
100
10
1
Frequency in kHz4 x 11μH 4 x 47μH 4 x 100μH 4 x 470μH
4 x 1mH 4 x 2.2mH 4 x 4.7mH 4 x 12mH
Impedance PerformanceCLJ-4 Series Quad Chokes
Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374-954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427-244 1325 http://www.talema-nuvotem.com
8
CMJ-2 Series • Miniature SMD Common Mode Double Chokes
Electrical Specifications @ 25°CNominal Voltage: 42Vac (50/60Hz), 80VdcOperating Temperature: -25° to +85°CStorage Temperature: -40° to +125°CClimatic category: according to IEC68-1 25/85/56Test voltage between windings: 500 Vrms
Test frequencyNominal Inductance: measured @ 100kHz/20 mVrmsLeakage Inductance: measured @ 100kHz, 100mVrmsTest Equipment: HP4192A
Weight: ~ 0.3 gramPackaging: Tape & Reel
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Surface Coplanarity will be 0.004(0.10) maximum
Features• Miniature, low cost SMD for pick and place compatability while
providing consistent and reliable coplanarity• Other inductance values and special types for operation at 150°C
ambient are available upon request• High attenuation over a wide frequency range - CAN bus types
to 500MHz• Available in Bifilar and Sector winding (Suffix S)• Materials: UL94-VO• Manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• Fully RoHS compliant and meets lead free reflow
level J-STD-020C
Dimensions
0° -
8°
0.091(2.30)
0.100(2.54)
0.039(1.00)
0.394(10.00)
Suggested PadLayout
0.209(5.30)
0.169 (4.30)
0.020 x 0.12(0.50 x 0.30)
BifilarWinding
SectorCMJ-2-XXXS
Winding
0.100(2.54)
0.299 (7.60)
0.354 (9.00) C
MJ-
2-XX
XW
k/Yr
0.228(5.80)
rebmuNtraP )Hμ(LCO%03-/05+
IN)Am(
LL)Hμ(
R UC)smhOm(
VT)smrV(
forebmuNseniLataD
snoitacilpparailimisdnasubNACrofgnidniWrotceSS060-2-JMC 6 0052 04.0 22 005 2S052-2-JMC 52 008 05.1 211 005 2S015-2-JMC 15 008 00.2 841 005 2
seniLlangiSdnaataDrofgnidniWralifiB050-2-JMC 5 0021 50.0 001 005 2011-2-JMC 11 005 50.0 021 005 2052-2-JMC 52 005 01.0 69 005 2015-2-JMC 15 005 01.0 841 005 2101-2-JMC 001 005 52.0 062 005 2174-2-JMC 074 005 02.0 842 005 2201-2-JMC 0001 005 52.0 052 005 2222-2-JMC 0022 004 51.0 082 005 2274-2-JMC 0074 002 03.0 548 005 2301-2-JMC 00001 002 04.0 0021 005 2302-2-JMC 00002 041 07.0 0081 005 2374-2-JMC 00074 001 05.1 0543 005 2
Schematic
1 4
2 3
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
9
CMJ-2 Series • Impedance Performance
Frequency in kHz
Impedance Performance CMJ-2 SeriesDouble Chokes with Bifilar Winding
10 100 1000 10000 100000
Impe
danc
e in
Ohm
s
100,000
10,000
1,000
100
10
2x5μH 2x11μH 2x25μH 2x51μH 2x100μH 2x470μH
2x1.0mH 2x2.2mH 2x4.7mH 2x10mH 2x20mH 2x47mH
THE TALEMA GROUP • Magnetic Components for Universal Applications
Impedance Performance CMJ-2 SeriesDouble Chokes with Sector Winding
2 x 6μH 2 x 25μH 2 x 51μH
Impe
danc
e in
Ohm
s
Frequency in kHz
100 1,000 10,000 100,000 1,000,000
10,000
1,000
100
10
1
10
CMJ-4 Series • Miniature SMD Common Mode Quad Chokes
Electrical Specifications @ 25°CNominal Voltage: 42Vac (50/60Hz), 80VdcOperating Temperature: -25° to +85°CStorage Temperature: -40° to +125°CClimatic category: according to IEC68-1 25/85/56Test voltage between windings: 500 Vrms
Test frequencyNominal Inductance: measured @ 100kHz/20 mVrmsLeakage Inductance: measured @ 100kHz, 100mVrmsTest Equipment: HP4192A
Weight: ~ 0.3 gramPackaging: Tape & Reel
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Surface Coplanarity will be 0.004(0.10) maximum
Features• Miniature, low cost SMD for pick and place compatability while
providing consistent and reliable coplanarity• Other inductance values and special types for operation at 150°C
ambient are available upon request• High attenuation over a wide frequency range• Materials: UL94-VO• Manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• Fully RoHS compliant and meets lead free reflow
level J-STD-020C
Dimensions
0° -
8°
0.169 (4.30)
0.209(5.30)
0.020 x 0.12(0.50 x 0.30)
3 x 0.050(3 x 1.27)
0.031(0.80)
0.394(10.00)
Suggested PadLayout
0.213(5.40)
0.299 (7.60)
0.354 (9.00) C
MJ-
4-XX
XW
k/Yr
3 x 0.050(3 x 1.27) 0.228
(5.80)
seniLlangiSdnaataDrofsekohCdauQedoMnommoCerutainiM
rebmuNtraPLCO)Hμ(
IN)Am(
LL)Hμ(
R UC)smhOm(
VT)smrV(
forebmuNseniLataD
011-4-JMC 11 006 01.0 031 005 4
042-4-JMC 42 005 51.0 012 005 4
074-4-JMC 74 005 52.0 062 005 4
101-4-JMC 001 005 03.0 033 005 4
174-4-JMC 074 005 51.0 552 005 4
201-4-JMC 0001 005 52.0 013 005 4
222-4-JMC 0022 004 04.0 075 005 4
274-4-JMC 0074 003 54.0 058 005 4
321-4-JMC 00021 031 06.0 0012 005 4
Schematic
1 8
2 7
3 6
4 5
10 100 1000 10000 100000
Impe
danc
e in
Ohm
s
100,000
10,000
1,000
100
10
1
Frequency in kHz4 x 11μH 4 x 47μH 4 x 100μH 4 x 470μH
4 x 1mH 4 x 2.2mH 4 x 4.7mH 4 x 12mH
Impedance PerformanceCMJ-4 Series Quad Chokes
Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374-954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427-244 1325 http://www.talema-nuvotem.com
11
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
CFJ Series • Common Mode Interface Chokes for Data and Signal Lines
Features• Low cost, compact SMD for pick and place compatability
while providing consistent and reliable coplanarity• High attenuation over a wide frequency range• Manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• Other inductance values available upon request• Fully RoHS compliant and meets lead free reflow
level J-STD-020C
Electrical Specifications @ 25°CNominal Voltage: 42Vac (50/60Hz), 80VdcOperating Temperature: -25° to +85°CStorage Temperature: -40° to +125°CClimatic category: according to IEC68-1 25/85/56Test voltage between windings: 500 Vrms
Test frequencyNominal Inductance: measured @ 100kHz / 20 mVrmsLeakage Inductance: measured @ 100kHz / 100mVrmsTest Equipment: HP4192A
Surface Coplanarity will be 0.004(0.10) maximum
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25)
CFJ-3 CFJ-4
3 x 0.100(3 x 2.54)
0.453 (11.50)
TALEMA INW K / Y R
Part Number
0.378(9.60)
0.374 (9.50)
1 8
2 7
3 6
4 5
A1 6
2 5
3 4
A
0.283(7.20)
0.244 (6.20)
0.020 x 0.12(0.50 x 0.30)
0° -
8°
Suggested PadLayout
0.047(1.20)
0.300(7.62)
0.492(12.50)
0.287(7.30)
0.283(7.20)
0.244 (6.20)
0.020 x 0.12(0.50 x 0.30)
0° -
8°
Suggested PadLayout
0.287(7.30)
0.047(1.20)
0.200(5.08)
0.492(12.50)
0.100(2.54)
0.374 (9.50)
0.453 (11.50)
TALEMA INW K / Y R
Par tNumber
0.307(7.80)
noisserppuSesioNIMEeniLlangiSdnaataDrofsekohCedoMnommoC
rebmuNtraP forebmuNseniLataD
LCO)%03±Hμ(
IN)Am(
RCD)pyTsmhOm(
rebmuNslioCfo
sgnidniWeroCrep citamehcS
erocrepsgnidniw3•sekohCirT042-3-JFC 3 42 0001 54 1 3 A101-3-JFC 3 001 007 011 1 3 A174-3-JFC 3 074 007 05 1 3 A186-3-JFC 3 186 007 55 1 3 A201-3-JFC 3 0001 007 07 1 3 A251-3-JFC 3 0051 056 501 1 3 A222-3-JFC 3 0022 006 521 1 3 A233-3-JFC 3 0033 004 512 1 3 A274-3-JFC 3 0074 053 043 1 3 A
erocrepsgnidniw4•sekohcdauQ033-4-JFC 4 33 055 56 1 4 A074-4-JFC 4 74 045 08 1 4 A101-4-JFC 4 001 063 061 1 4 A174-4-JFC 4 174 054 56 1 4 A201-4-JFC 4 0001 054 58 1 4 A274-4-JFC 4 0074 022 034 1 4 A
CSJ Series • Common Mode Interface Chokes for Data and Signal Lines
Features• Low cost, compact SMD for pick and place compatability
while providing consistent and reliable coplanarity• High attenuation over a wide frequency range - to 500MHz• Manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• Other inductance values available upon request• Fully RoHS compliant and meets lead free reflow
level J-STD-020C
Electrical Specifications @ 25°CNominal Voltage: 42Vac (50/60Hz), 80VdcOperating Temperature: -25° to +125°CStorage Temperature: -40° to +125°CClimatic category: according to IEC68-1 25/125/56Test voltage between windings: 500 Vrms
Test frequencyNominal Inductance: measured @ 100kHz / 20 mVrmsLeakage Inductance: measured @ 100kHz / 100mVrmsTest Equipment: HP4192A
12
noisserppuSesioNIMEeniLlangiSdnaataDrofsekohCedoMnommoC
rebmuNtraPLCO
)%03±Hμ(IN
)Am(LL
)Hμ(RCD
)pyTsmhOm(VT
)smrV(forebmuNseniLataD
erocrepsgnidniw2•sekohcelbuoD011-2-JSC 11 006 50.0 08 005 2074-2-JSC 74 005 01.0 841 005 2101-2-JSC 001 005 11.0 023 005 2174-2-JSC 174 005 51.0 092 005 2201-2-JSC 0001 005 61.0 572 005 2222-2-JSC 0022 004 21.0 543 005 2274-2-JSC 0074 003 91.0 049 005 2301-2-JSC 00001 002 63.0 0041 005 2302-2-JSC 00002 041 00.1 0081 005 2374-2-JSC 00074 001 00.1 0093 005 2
erocrepsgnidniw3•sekohcirT011-3-JSC 11 006 50.0 08 005 3074-3-JSC 74 005 01.0 841 005 3101-3-JSC 001 005 11.0 023 005 3174-3-JSC 174 005 51.0 092 005 3201-3-JSC 0001 005 61.0 023 005 3222-3-JSC 0022 004 21.0 095 005 3274-3-JSC 0074 003 91.0 049 005 3321-3-JSC 00021 031 04.0 0081 005 3
erocrepsgnidniw4•sekohcdauQ011-4-JSC 11 006 50.0 08 005 4074-4-JSC 74 005 01.0 002 005 4101-4-JSC 001 005 01.0 063 005 4174-4-JSC 174 005 51.0 082 005 4201-4-JSC 0001 005 90.0 053 005 4222-4-JSC 0022 004 60.0 056 005 4274-4-JSC 0074 003 90.0 019 005 4321-4-JSC 00021 031 63.0 0022 005 4
Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374-954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427-244 1325 http://www.talema-nuvotem.com
Frequency in kHz
Surface Coplanarity will be 0.004(0.10)
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25)
CSJ-4
0° -
8°
0.177(4.50)
0.138 (3.50)
0.016SQ(0.40 SQ)
0.360(9.14)
3 x 0.100(3 x 2.54)
0.315 (8.00)
TALEMA INW K / Y R
Part Number 0.291 (7.40)
Suggested PadLayout
0.039(1.00)
0.300(7.62)
0.354(9.00)
0.197(5.00)
0° -
8°
CSJ-2 & 3
CSJ-4 Series Quad Chokes
0.177(4.50)
0.138 (3.50)
0.016SQ(0.40 SQ)
0.260(6.60)
2 x 0.100(2 x 2.54)
0.315 (8.00)
TALEMA INW K / Y R
Part Number 0.291 (7.40)
Suggested PadLayout
0.039(1.00)
0.200(5.08)
0.354(9.00)
0.197(5.00)
CSJ Series • Dimensions & Impedance Performance
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
Frequency in kHz
Impedance Performance
CSJ-2 Series Double Chokes with Bifilar Winding
Impe
danc
e in
Ohm
s 100,000
10,000
1,000
100
10
1 6
2 5
3 4
3 Data Lines
Schematic
1 6
3 4
2 Data Lines Schematic
1 8
2 7
3 6
4 5
4 Data Lines
10 100 1000 10000 100000
2x5μH 2x11μH 2x25μH 2x51μH 2x100μH 2x470μH
2x1.0mH 2x2.2mH 2x4.7mH 2x10mH 2x20mH 2x47mH
10 100 1000 10000 100000
Impe
danc
e in
Ohm
s
100,000
10,000
1,000
100
10
1
4 x 11μH 4 x 47μH 4 x 100μH 4 x 470μH
4 x 1mH 4 x 2.2mH 4 x 4.7mH 4 x 12mH
13
14
CCJ Series • Common Mode Interface Chokes for Data and Signal Lines
Features• Low cost, compact SMD for pick and place compatability
while providing consistent and reliable coplanarity• High attenuation over a wide frequency range• Manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• Other inductance values available upon request• fully RoHS compliant and meets lead free reflow
level J-STD-020CElectrical Specifications @ 25°CNominal Voltage: 42Vac (50/60Hz), 80VdcOperating Temperature: -25° to +85°CStorage Temperature: -40° to +125°CClimatic category: according to IEC68-1 25/85/56
Test voltage between windings: 500 VrmsTest frequencyNominal Inductance: measured @ 100kHz/20 mVrmsLeakage Inductance: measured @ 100kHz, 100mVrmsTest Equipment: HP4192A
rebmuNtraP forebmuNseniLataD
LCO)%03±Hμ(
IN)Am(
RCD).pyTsmhOm(
rebmuNslioCfo
sgnidniWeroCrep citamehcS
sekohCelbuoD062-2-JCC 2 62 009 55 1 2 A201-2-JCC 2 0001 055 041 1 2 A251-2-JCC 2 0051 055 001 1 2 A222-2-JCC 2 0022 055 511 1 2 A233-2-JCC 2 0033 055 041 1 2 A205-2-JCC 2 0005 005 081 1 2 A286-2-JCC 2 0086 054 002 1 2 A301-2-JCC 2 00001 004 072 1 2 A321-2-JCC 2 00021 004 082 1 2 A302-2-JCC 2 00002 003 084 1 2 A382-2-JCC 2 00082 072 025 1 2 A305-2-JCC 2 00005 002 0201 1 2 A307-2-JCC 2 00007 071 0451 1 2 A
erocrepsgnidniw4•sekohCdauQ062-4-JCC 4 62 006 56 1 4 B074-4-JCC 4 74 005 001 1 4 B101-4-JCC 4 001 004 031 1 4 B122-4-JCC 4 022 004 091 1 4 B174-4-JCC 4 074 004 031 1 4 B186-4-JCC 4 086 004 041 1 4 B201-4-JCC 4 0001 053 091 1 4 B251-4-JCC 4 0051 053 021 1 4 B222-4-JCC 4 0022 053 041 1 4 B233-4-JCC 4 0033 053 081 1 4 B205-4-JCC 4 0005 033 032 1 4 B301-4-JCC 4 00001 032 034 1 4 B321-4-JCC 4 00021 071 097 1 4 B385-4-JCC 4 00085 09 0532 1 4 B
0.102(2.60)
0.047(1.20) 0.590
(15.00)
0.300(7.62)
Suggested PadLayout
1 8
4 5
A1 8
2 7
3 6
4 5
B
Schematics
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Surface Coplanarity will be 0.004(0.10) maximum
0° - 8°
0.354(9.00)
0.315 (8.00)
0.020 x 0.12(0.50 x 0.30)
0.433(11.00)
0.100(2.54)
0.300 (7.62)
0.472 (12.00)
0.551 (14.00)
TALEMA INWK/YR
Part Number
8 5
1 4
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
15
CCJ Series • Impedance Performance
Impedance PerformanceCCJ-2 Series Double Chokes
Impedance PerformanceCCJ-4 Series Quad Chokes
10 100 1000 10000 100000
Frequency in kHz
Impe
danc
e in
Ohm
s
100,000
10,000
1,000
100
10
2 x 1mH 2 x 5mH 2 x 10mH 2 x 50mH
10 100 1000 10000 100000Frequency in kHz
Impe
danc
e in
Ohm
s
100,000
10,000
1,000
100
10
1
4 x 47μH 4 x 470μH 4 x 1mH 4 x 5mH 4 x 12mH
THE TALEMA GROUP • Magnetic Components for Universal Applications
Sales & Marketing, Design and Manufacturing Facilitieshttp://www.talema-nuvotem.com
IrelandNUVOTEM TEO.CrollyCo. DonegalTel: Int. + 353 74 - 954 8666Fax: Int. + 353 74 - 954 8139Email: [email protected]
GermanyTALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 - 841 00 - 0Fax: Int. + 49 89 - 841 00 25Email: [email protected]
Eastern Europe &Czech RepublicNT MAGNETICS s.r.o.Chebská 27322 00 PlzeñTel: Int. + 420 377 - 338 351Fax: Int. + 420 377 - 338 350Email: [email protected] Site: www.ntmagnetics.cz
IndiaTALEMA ELECTRONIC PVT. LTD.Opposite the SIDCO Industrial EstateGins Towers4/5S.H/1, Omalur Main RoadSalem - 636 004, Tamil NaduTel: Int. + 91 427 - 244 1325Fax: Int. + 91 427 - 243 0034E-mail: [email protected] Site: www.talemaindia.com
Features• high attenuation over a wide frequency range• low interwinding and coupling capacitance• wide inductance range• excellent quality at extremely competitive price due to
high volume production• manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• other inductance values available upon request• fully RoHS compliant and meets lead free reflow
level J-STD-020C
When ordering Series CD or CQ, use suffix "F", "V" or “J” to designate desired package style.CDF / CQF = Flat package, THTCDV / CQV = Vertical package, THTCDJ / CQJ = Flat package, SMD
Dimensions, Schematics and Impedance Curves on following two pages
CD & CQ Series Common Mode Interface Chokes for Data and Signal Lines
rebmuNtraP LN )Hμ(%03±
IN)Am(
LL)Hμ(
R UC)smhOm(
VP)smrV(
sgnidniWeroCrep egakcaP citamehcS
noisserppusesionIMErofsekohCelbuoD-seireSDCA-0.1-__DC 0001 006 52.0 091 005 2 V/F AA-7.1-__DC 0071 055 24.0 002 005 2 V/F A
A-2.2-__DC 0022 053 54.0 003 005 2 V/F A
A-3.3-__DC 0033 053 05.0 073 005 2 V/F A
A-7.4-__DC 0074 053 04.0 006 005 2 V/F A
A-8.6-__DC 0086 053 55.0 015 005 2 V/F A
A-01-__DC 00001 053 56.0 026 005 2 V/F A
A-21-__DC 00021 003 07.0 086 005 2 V/F A
A-51-__DC 00051 003 55.0 027 005 2 V/F A
A-22-__DC 00022 003 58.0 029 005 2 V/F A
A-82-__DC 00082 003 59.0 0201 005 2 V/F A
A-33-__DC 00033 003 09.1 0211 005 2 V/F A
A-05-__DC 00005 003 53.1 0081 005 2 V/F A
A-07-__DC 00007 003 05.2 0012 005 2 V/F A
noisserppusesionIMErofsekohCdauQ-seireSQCB-0.1-__QC 0001 004 02.0 002 005 4 V/F B
B-7.1-__QC 0071 053 04.0 062 005 4 V/F B
B-2.2-__QC 0022 003 54.0 013 005 4 V/F B
B-3.3-__QC 0033 003 05.0 083 005 4 V/F B
B-0.5-__QC 0005 003 03.0 034 005 4 V/F B
B-8.6-__QC 0086 003 55.0 058 005 4 V/F B
B-01-__QC 00001 003 56.0 0601 005 4 V/F B
B-21-__QC 00021 052 56.0 0211 005 4 V/F B
B-85-__QC 00085 002 04.1 0042 005 4 V/F B
B-09-__QC 00009 051 00.2 0514 005 4 V/F B
Electrical Specifications @ 25°CNominal Voltage: 42Vac (50/60Hz), 80VdcOperating Temperature: -25° to +85°CStorage Temperature: -40° to +125°CClimatic category: according to IEC68-1 25/85/56Test voltage between windings: 500 Vrms
Test frequencyNominal Inductance: measured @ 100kHz/20 mVrmsLeakage Inductance: measured @ 100kHz, 100mVrmsTest Equipment: HP4192A
16
Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374-954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427-244 1325 http://www.talema-nuvotem.com
17
SchematicsPackage StyleDimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise
CDV / CQV
CDF / CQF
Packaging Style
Surface Coplanarity will be 0.004(0.10) maximum
CDJ / CQJ
0° - 8°
0.020(0.50)
0.200(5.08)
0.413(10.50) 0.461
(11.70)
Suggested PadLayout
0.400(10.16)
0.098 (2.50)
0.047(1.20) 0.709
(18.00)
0.520(13.20)
0.100(2.54)
0.400(10.16)
0.654 (16.60)
0.591 (15.00)
TALEMA INWK/YR
Part Number
0.200(5.08)
10 9 7 6
1 2 4 5
A
1 10
5 6
B
1 10
2 9
4 7
5 6
A
1 10
5 6
B
1 10
2 9
4 7
5 6
A
1 10
5 6
B
1 10
2 9
4 7
5 6
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
0.500 (12.70)
0.400 (10.16)
0.492 (12.50)
0.100 (2.54)
0.551 (14.00)
5 6
1 10
0.018 x 0.026 (0.45 x 0.66)
0.433 (11.00)
0.059 (1.50)
0.138 (3.50)
0.300 (7.62)
0.354 (9.00)
0.400 (10.16)
0.551 (14.00)
0.100 (2.54)
5 6
1 10
0.571 (14.50)
0.059 (1.50)
0.138 (3.50)
0.018 x 0.026 (0.45 x 0.66)
Note: Parts will be supplied with only the pins shown on schematics A (CDF style) and B (CQF style)
Note: Parts will be supplied with only the pins shown on schematics A (CDV style) and B (CQV style)
Note: Parts will be supplied with only the pins shown on schematics A (CDJ style, and B (CQJ style)
CQ Series Quad Chokes
10 100 1000 10000 100000
Impe
danc
e in
Ohm
s
1,000,000
100,000
10,000
1,000
100
10
Frequency in kHz
4 x 1mH
4 x 5mH
4 x 58mH
Impedance PerformanceCD Series Double Chokes
10 100 1000 10000 100000Frequency in kHz
Impe
danc
e in
Ohm
s
1,000,000
100,000
10,000
1,000
100
10
2 x 1mH
2 x 4.7mH
2 x 15mH
2 x 33mH
2 x 70mH
Impedance Performance
18
THE TALEMA GROUP • Magnetic Components for Universal Applications
Sales & Marketing, Design and Manufacturing Facilitieshttp://www.talema-nuvotem.com
IrelandNUVOTEM TEO.CrollyCo. DonegalTel: Int. + 353 74 - 954 8666Fax: Int. + 353 74 - 954 8139Email: [email protected]
GermanyTALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 - 841 00 - 0Fax: Int. + 49 89 - 841 00 25Email: [email protected]
Eastern Europe &Czech RepublicNT MAGNETICS s.r.o.Chebská 27322 00 PlzeñTel: Int. + 420 377 - 338 351Fax: Int. + 420 377 - 338 350Email: [email protected] Site: www.ntmagnetics.cz
IndiaTALEMA ELECTRONIC PVT. LTD.Opposite the SIDCO Industrial EstateGins Towers4/5S.H/1, Omalur Main RoadSalem - 636 004, Tamil NaduTel: Int. + 91 427 - 244 1325Fax: Int. + 91 427 - 243 0034E-mail: [email protected] Site: www.talemaindia.com
19
Features• High attenuation over a wide frequency range• Low interwinding and coupling capacitance• Wide inductance range• Manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• Other inductance values available upon request• fully RoHS compliant
CKV Series • Common Mode Interface Chokes for Data and Signal Lines
Electrical Specifications @ 25°CNominal Voltage: 42Vac (50/60Hz), 80VdcOperating Temperature: -25° to +85°CStorage Temperature: -40° to +125°CClimatic category: according to IEC68-1 25/85/56Test voltage between windings: 500 Vrms
Test frequency:Nominal Inductance: measured @ 100kHz, 100mVrmsLeakage Inductance: measured @ 100kHz, 100mVrmsTest Equipment: HP4192A
Schematic
A1 2
4 3
TALEMA INPart Nr.Wk/Yr
0.291 (7.40)
0.200 (5.08)
0.596(15.20)
0.500(12.70)
0.100 (2.54)
1 2
4 3 Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Impedance PerformanceBifilar Winding
10 100 1000 10000 100000Frequency in kHz
Impe
danc
e in
Ohm
s
1,000,000
100,000
10,000
1,000
100
10
2 x 4.7mH
2 x 10mH
2 x 38mH
0.018 x 0.026 (0.45 x 0.66)
0.118 (3.00)
0.693(17.60)
noisserppusesionIMErofsekohCelbuoD-seireSVKC
rebmuNtraP LN )Hμ(%03±
IN)Am(
LL)Hμ(
R UC)smhOm(
VP)smrV(
sgnidniWeroCrep citamehcS
21.0-VKC 021 001 53.0 021 005 2 A
7.4-VKC 0074 001 00.1 009 005 2 A
01-VKC 00001 001 51.1 0031 005 2 A
61-VKC 00061 001 02.1 0061 005 2 A
83-VKC 00083 001 00.3 0012 005 2 A
86-VKC 00086 001 03.2 0364 005 2 A
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
20
Features• High attenuation over a wide frequency range• Low interwinding and coupling capacitance• Sector Winding• Manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• Flame retardant case per UL94V-O• Other inductance values available upon request• fully RoHS compliant
CKV Series • Current Compensated Double Chokes for Power Lines
Electrical Specifications @ 25°CRated Voltage: 250VacRated current @ 50/60Hz and 40°C ambientOperating Temperature: -40° to +85°CStorage Temperature: -40° to +125°CClimatic category: according to IEC68-1 40/85/56
Test voltage: 1500 Vac, 2s line to lineTest Equipment: HP4192A
Weight: ~ 3 grams
seniLrewoProfsekohCelbuoDdetasnepmoCtnerruC-seireSVKC
rebmuNtraP LN )Hμ(%05+/03-
IN)Am(
LL)Hμ(
R UC)smhOm(
VP)smrV(
sgnidniWeroCrep citamehcS
S-7.4-VKC 0074 007 07 044 0051 2 BroA
S-8.6-VKC 0086 006 001 036 0051 2 BroA
S-01-VKC 00001 005 051 0001 0051 2 BroA
S-51-VKC 00051 004 522 0531 0051 2 BroA
S-03-VKC 00003 003 004 0022 0051 2 BroA
S-74-VKC 00074 052 057 0042 0051 2 BroA
Impedance PerformanceSector Winding
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Schematic
0.291 (7.40)
0.200 (5.08)
0.596(15.20)
0.500(12.70)
0.100 (2.54)
1 3
6 5 4
TALEMA INPart Nr.Wk/Yr
0.110 (2.80)
0.693(17.60)
Ø 0.024(Ø 0.60)
Note: Normal pinning will be 1-3-4-6 Schematic A. If pinning1-3-5-6 is required, Schematic B should be specified whenordering.
A
1 3
6 4
1 3
6 5
B
2 x 4.7mH
2 x 6.8mH
2 x 10mH
2 x 15mH
2 x 30mH
10 100 1000 10000 100000Frequency in kHz
Impe
danc
e in
Ohm
s
1,000,000
100,000
10,000
1,000
100
10
Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374-954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427-244 1325 http://www.talema-nuvotem.com
21
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
Features• Low profile (6.0mm) and light weight (4.0 g), Talema common mode
choke modules provide excellent EMI reduction in Quad Port T1/E1applications
• High density board placement with modular design• SMD package facilitates pick and place compatability while ensuring
consistent and reliable coplanarity• Manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• Fully RoHS compliant and meets lead free reflow
level J-STD-020C
Electrical Specifications @ 25°CNominal Voltage: 42Vac (50/60Hz), 80VdcOperating Temperature: -25° to +85°CStorage Temperature: -40° to +125°CClimatic category: according to IEC68-1 25/85/56Test voltage between windings: 500 VrmsTest Frequency: Inductance measured @ 100kHz/20mVrms
COJ Series - Common Mode Octal Chokes for Quad Port T1/E1
ApplicationThe 16 data line common mode choke module has been designedfor T1/E1 applications and provides excellent EMI suppression fordata and signal line filtering
Standard packing: Tape and reelWeight: ~ 4 grams
PackageSuggested Pad layout
0.030(0,77)
19 x 0.050(19 x 1,27)
0.950(24,13)
0.661(16,80)
0.480(12,20)
0.091(2,30)
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Surface coplanarity will be <0.004 (0.10)
0° -
8°
0.236(6.00)
0.189(4.80)
1.102 (28.00)
0.638(16.20)
0.076(1.93)
0.575(14.60)
19 x 0.05 (1,27)
0.020 x 0.012 (0.50 x 0.30)
TALEMA INWK/YR
Part Number
Schematic
1 40
2 39
3 38
5 36
6 35
7 34
8 33
10 31
11 30
12 29
13 28
15 26
16 25
17 24
18 23
20 21
noisserppuSesioNIMEeniLlangiSdnaataDrofsekohCedoMnommoClatcOJOC
rebmuNtraP fo.oNseniLataD
LCO).niMHμ(
RCD).pyTsmhOm(
noitaunettAedoMnommoC).pyTBd(
zHk001 zHM1 zHM01 zHM03 zHM05 zHM001 zHM003
074-61-JOC 61 74 002 31 72 04 44 24 63 62
zHk001 zHk003 zHM1 zHM3 zHM5 zHM01 zHM03
205-61-JOC 61 0005 0091 62 83 04 23 62 12 61
22
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
Features• EMI noise suppression for data and signal line filtering• Low cost SMD common mode chokes are designed for pick
and place compatability while providing consistent and reliablecoplanarity
• High attenuation over a wide frequency range• Manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• Fully RoHS compliant and meets lead free reflow
level J-STD-020C
CUJ-16 • Miniature Chip Style SMD Common Mode Filter Chokes
noisserppuSesioNIMEeniLlangiSdnaataDrofsekohCedoMnommoC
rebmuNtraP forebmuNseniLataD
LCO )Hμ(%03±
IN)Am(
RCD)smhOm(
rebmuNslioCfo
sgnidniWlioCrep citamehcS
E61-042-JUC 4 42 008 54 2 2 EE61-043-JUC 4 43 007 55 2 2 EE61-101-JUC 4 001 054 531 2 2 EE61-174-JUC 4 074 054 59 2 2 EE61-201-JUC 4 0001 054 531 2 2 EE61-274-JUC 4 0074 003 013 2 2 EC61-042-JUC 6 42 056 54 2 3 CC61-074-JUC 6 74 054 09 2 3 CC61-101-JUC 6 001 053 071 2 3 CC61-174-JUC 6 074 053 59 2 3 CC61-201-JUC 6 0001 033 071 2 3 CC61-274-JUC 6 0074 002 034 2 3 CD61-042-JUC 6 42 006 57 3 2 DD61-074-JUC 6 74 005 011 3 2 DD61-086-JUC 6 86 054 531 3 2 DD61-174-JUC 6 074 053 022 3 2 DD61-201-JUC 6 0001 053 022 3 2 DD61-274-JUC 6 0074 091 057 3 2 DA61-042-JUC 8 42 055 54 2 4 AA61-074-JUC 8 74 004 09 2 4 AA61-101-JUC 8 001 052 042 2 4 AA61-174-JUC 8 074 052 59 2 4 AA61-201-JUC 8 0001 052 042 2 4 AA61-274-JUC 8 0074 061 006 2 4 AB61-042-JUC 8 42 034 031 4 2 BB61-074-JUC 8 74 063 081 4 2 BB61-101-JUC 8 001 003 062 4 2 BB61-174-JUC 8 074 003 081 4 2 BB61-201-JUC 8 0001 003 042 4 2 BB61-274-JUC 8 0074 061 0811 4 2 B
Electrical Specifications @ 25°CNominal Voltage: 42Vac (50/60Hz), 80VdcOperating Temperature: -25° to +85°CStorage Temperature: -40° to +125°CClimatic category: according to IEC68-1 25/85/56Test voltage between windings: 500 Vrms
Test frequencyNominal Inductance: measured @ 100kHz/20 mVrmsLeakage Inductance: measured @ 100kHz, 100mVrmsTest Equipment: HP4192A
23
Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25)
CUJ-XXX-16 Suggested
Pad Layout
0.079(2.00)
0.394(10.60)
0.031(0.80)
0.050(1.27)
0.350(8.89)
0° -
8°
0.378(9.60)
0.504(12.80)
0.350(8.89)
0.077 (1.96)
0.346(8.80)
TALEMA INWK/YR
Part Number
Schematics
Surface Coplanarity will be 0.004(0.10) maximum
CUJ Packaging Style and Impedance Performance
A1 162 153 144 135 126 117 108 9
B1 162 153 144 135 126 117 108 9
C1 162 153 144 135 126 117 108 9
D1 162 153 144 135 126 117 108 9
E1 162 153 144 135 126 117 108 9
10 100 1000 10000 100000
Frequency in kHz
Impe
danc
e in
Ohm
s
100,000
10,000
1,000
100
10
Impedance PerformanceCUJ-XXX-16A Series Quadfilar Winding
Impedance PerformanceCUJ-XXX-16B Series Bifilar Winding
4 x 47μH 4 x 4.7mH
10 100 1000 10000 100000
Frequency in kHz
Impe
danc
e in
Ohm
s
100,000
10,000
1,000
100
10
2 x 24μH 2 x 100μH 2 x 4.7mH
Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374-954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427-244 1325 http://www.talema-nuvotem.com
0.189(4.80)
0.236(6.00)
Pins: 0.016 x 0.016 (0.40 x 0.40)
24
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
Features• EMI noise suppression for data and signal line filtering• Miniature, low cost SMD common mode chokes are designed
for pick and place compatability and provide reliable coplanarity• High attenuation over a wide frequency range• Manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility T• Parts shown below meet all popular footprints• Fully RoHS compliant and meets lead free reflow
level J-STD-020C
SMD Data and Signal Line Filter Chokes
Electrical Specifications @ 25°CNominal Voltage: 42Vac (50/60Hz), 80VdcOperating temperature: -25° to +85°CStorage temperature: -40° to +125°C
Climatic category: according to IEC68-1 25/85/56Test voltage between windings: 500 VrmsTest frequency: Inductance measured @ 100kHz / 20 mVrmsTest Equipment: HP4192A
noisserppusIMEeniLlangiSdnaataDrofsekohCedoMnommoCerutainiM
rebmuNtraP)Hμ(LCO
%03±IN
)Am(RCD
)smhOm(rebmuNslioCfo
sgnidniWlioCrep
citamehcS rebmuNtraP)Hμ(LCO
%03±IN
)Am(RCD
)smhOm(rebmuNslioCfo
sgnidniWlioCrep
citamehcS
seniLataDowT seniLataDruoF011-2-JTC 11 003 061 1 2 A 033-4-JFC 33 055 56 1 4 A101-2-JTC 001 003 081 1 2 A 074-4-JFC 74 045 08 1 4 A174-2-JTC 074 002 083 1 2 A 101-4-JFC 001 063 061 1 4 A201-2-JTC 0001 051 066 1 2 A 174-4-JFC 074 063 56 1 4 A274-2-JTC 0074 051 0081 1 2 A 201-4-JFC 0001 003 58 1 4 A
011-2-JMC/JLC 11 005 021 1 2 A 274-4-JFC 0074 022 034 1 4 A074-2-JMC/JLC 74 005 051 1 2 A 062-4-JCC 62 006 56 1 4 B101-2-JMC/JLC 001 005 062 1 2 A 074-4-JCC 74 005 001 1 4 B174-2-JMC/JLC 074 005 052 1 2 A 101-4-JCC 001 004 031 1 4 B201-2-JMC/JLC 0001 005 052 1 2 A 122-4-JCC 022 004 091 1 4 B274-2-JMC/JLC 0074 002 548 1 2 A 174-4-JCC 074 004 021 1 4 B301-2-JMC/JLC 00001 002 0021 1 2 A 201-4-JCC 0001 053 091 1 4 B374-2-JMC/JLC 00074 001 0543 1 2 A 251-4-JCC 0051 053 021 1 4 B
201-2-JCC 0001 055 041 1 2 A 205-4-JCC 0005 033 022 1 4 B251-2-JCC 0051 055 001 1 2 A 321-4-JCC 00021 071 097 1 4 B205-2-JCC 0005 005 081 1 2 A 385-4-JCC 00085 09 0532 1 4 B321-2-JCC 00021 004 082 1 2 A382-2-JCC 00082 072 025 1 2 A B-0.1-JQC 0001 004 002 1 4 B305-2-JCC 00005 002 0201 1 2 A B-0.5-JQC 0005 003 054 1 4 B307-2-JCC 00007 071 0451 1 2 A B-01-JQC 00001 003 0601 1 4 B
A-0.1-JDC 0001 006 091 1 2 A B-85-JQC 00085 002 0042 1 4 BA-7.4-JDC 0074 053 575 1 2 A B-09-JQC 00009 051 0514 1 4 BA-21-JDC 00021 003 086 1 2 A E61-042-JUC 42 008 54 2 2 EA-82-JDC 00082 003 0201 1 2 A E61-101-JUC 001 054 531 2 2 E
A-05-JDC 00005 003 0081 1 2 A E61-201-JUC 0001 054 531 2 2 E
A-07-JDC 00007 003 0512 1 2 A E61-274-JUC 0074 003 013 2 2 EseniLataDeerhT seniLataDxiS
042-3-JFC 42 0001 54 1 3 A C61-042-JUC 42 056 54 2 3 C201-3-JFC 0001 007 07 1 3 A C61-101-JUC 001 053 011 2 3 C222-3-JFC 0022 006 521 1 3 A C61-201-JUC 0001 033 071 2 3 C274-3-JFC 0074 053 043 1 3 A C61-274-JUC 0074 002 034 3 2 D
seniLataDruoF seniLataDthgiE011-4-JMC/JLC 11 006 031 1 4 A A61-042-JUC 42 055 54 2 4 A074-4-JMC/JLC 74 005 081 1 4 A A61-101-JUC 001 052 042 2 4 A101-4-JMC/JLC 001 005 033 1 4 A A61-174-JUC 074 052 59 2 4 A174-4-JMC/JLC 074 005 042 1 4 A A61-274-JUC 0074 061 506 2 4 A201-4-JMC/JLC 0001 005 013 1 4 A seniLataDneetxiS274-4-JMC/JLC 0074 003 068 1 4 A 074-61-JOC 74 003 002 8 2 --321-4-JMC/JLC 00021 031 0032 1 4 A 205-61-JOC 0005 051 0091 8 2 --
25
CFJ-3
CFJ-4
CCJ-2 / 4
CDJ / CQJ
0° - 8°
0.020(0.50)
0.200(5.08)
0.413(10.50) 0.461
(11.70)
0.100(2.54)
0.374 (9.50)
0.453 (11.50)
TALEMA INW K / Y R
Par tNumber
0.307(7.80)
3 x 0.100(3 x 2.54)
0.453 (11.50)
TALEMA INW K / Y R
Part Number
0.378(9.60)
0.374 (9.50)
0.287(7.30)
0.047(1.20)
0.200(5.08)
0.492(12.50)
0.047(1.20)
0.300(7.62)
0.492(12.50)
0.287(7.30)
0.102(2.60)
0.047(1.20) 0.590
(15.00)
0.300(7.62)
Suggested PadLayout
Suggested PadLayout
0.400(10.16)
0.098 (2.50)
0.047(1.20) 0.709
(18.00)
CLJ-4
CLJ-2
CMJ-4
CMJ-2
0° -
8°
3 x 0.050(3 x 1.27)
0.031(0.80)
0.394(10.00)
Suggested PadLayout
0.213(5.40)
0.039(1.00)
0.100(2.54)
0.213(5.40)
0.394(10.00)
Suggested PadLayout
1 4
2 3
Schematic
A
CLJ
-2-
XX
XW
k/Y
r
0.100(2.54)
0.287 (7.30)
0.350 (8.90)
0.213(5.40)
0.020 x 0.012(0.50 x 0.30)
0.146 (3.70)
0.185(4.70)
0.150 (3.80)
0.189(4.80)
0.016 x 0.016(0.40 x 0.40)
0.287 (7.30)
0.350 (8.90)
3 x 0.050(3 x 1.27) 0.213
(5.40)
CLJ
-4-
XX
XW
k/Y
r
3 x 0.050(3 x 1.27)
0.028(0.70)
0.394(10.00)
Suggested PadLayout
0.197(5.00)
0.169 (4.30)
0.209(5.30)
0.020 x 0.012(0.50 x 0.30)
0.039(1.00)
0.100(2.54)
0.213(5.40)
0.394(10.00)
Suggested PadLayout
1 4
2 3
Schematic
A
0.100(2.54)
0.299 (7.60)
0.354 (9.00) C
MJ-
2-X
XX
Wk/
Yr
0.228(5.80)
0.169 (4.30)
0.209(5.30)
0.020 x 0.12(0.50 x 0.30)
0° -
8°
0.299 (7.60)
0.354 (9.00) C
MJ-
4-X
XX
Wk/
Yr
3 x 0.050(3 x 1.27) 0.228
(5.80)
Suggested PadLayout
0.130(3.30)
0.083 (2.10)
0.020 x 0.12(0.50 x 0.30)
0° -
8°
0.069(1.75)
0.050(1.27)
0.031(0.80)
0.236(6.00)0.050
(1.27)
0.177 (4.50)
0.197 (5.00)
0.130(3.30)
SE1
510
CTJ-2
Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwiseSurface Coplanarity will be 0.004 (0.10) maximum
Packaging & Dimensions • SMD Data and Signal Line Filter Chokes
1 10
5 6
A1 10
2 9
4 7
5 6
B
1 8
4 5
A1 8
2 7
3 6
4 5
B
1 8
2 7
3 6
4 5
A
1 4
2 3
Schematic
A
Schematic
1 8
2 7
3 6
4 5
A
Schematic
1 8
2 7
3 6
4 5
A
1 6
2 5
3 4
A
0.520(13.20)
0.100(2.54)
0.400(10.16)
0.654 (16.60)
0.591 (15.00)
TALEMA INWK/YR
Part Number
0.200(5.08)
10 9 7 6
1 2 4 5
0° -
8°
0.283(7.20)
0.244 (6.20)
0.020 x 0.12(0.50 x 0.30)
0.020 x 0.12(0.50 x 0.30)
0.283(7.20)
0.244 (6.20)
0° -
8°
0.433(11.00)
0.100(2.54)
0.300 (7.62)
0.472 (12.00)
0.551 (14.00)
TALEMA INWK/YR
Part Number
8 5
1 4
0.354(9.00)
0.315 (8.00)
0.020 x 0.12(0.50 x 0.30)
0° - 8°
Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374-954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427-244 1325 http://www.talema-nuvotem.com
26
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwiseSurface Coplanarity will be 0.004 (0.10) maximum
Suggested Pad layout
COJ ModuleCUJ-XXX-16 Suggested PadLayoout
0.030(0,77)
19 x 0.050(19 x 1,27)
0.950(24,13)
0.661(16,80)
0.480(12,20)
0.091(2,30)
0° -
8°
0.189(4.80)
0.236(6.00)
Pins: 0.012 x 0.020 (0.30 x 0.50)
0.079(2.00)
0.394(10.60)
0.031(0.80)
0.050(1.27)
0.350(8.89)
1.102 (28.00)
0.638(16.20)
0.076(1.93)
0.575(14.60)
19 x 0.05 (1,27)
TALEMA INWK/YR
Part Number
0.378(9.60)
0.504(12.80)
0.350(8.89)
0.077 (1.96)
0.346(8.80)
TALEMA INWK/YR
Part Number
Schematics
C1 162 153 144 135 126 117 108 9
1 162 153 144 135 126 117 108 9
EA1 162 153 144 135 126 117 108 9
0° -
8°
0.236(6.00)
0.189(4.80)
0.020 x 0.012 (0.50 x 0.30)
Schematic
1 40
2 39
3 38
5 36
6 35
7 34
8 33
10 31
11 30
12 29
13 28
15 26
16 25
17 24
18 23
20 21
Packaging & Dimensions • SMD Data and Signal Line Filter Chokes
Tube Packaging and Dimensions
A
D
C
B E F
G
Dimensions for Tube (Unit : mm)
Outer Carton
550 300
220
epyTsnoisnemiDretuOebuTgnikcaP
)mmni( ytitnauQ)ebuT/scP(
ytitnauQ)desaC/ebuT(
A B C D E F G
FQC/FDC 0.515 04.61 09.71 02.4 06.9 04.3 07.0 93 8136/261
VQC/VDC 0.515 04.61 04.22 00.7 06.1 04.7 07.0 45 2655/301
VKC 0.515 09.71 05.42 00.5 01.3 04.7 07.0 55 0594/09
27
Tape & Reel Packaging and Dimensions
Dimensions for Carrier Tape (Unit : mm)
epyTmmnisnoisnemiD leeR
eziSytitnauQ
)leeR/scP(ytitnauQ
)desaC/leeR(W F E P2 P0 D0 D1 P A0 B0 S0 T K0
JDC 00.23 02.41 57.1 00.2 00.4 05.1Ø 00.2Ø 00.42 55.31 59.61 04.82 04.0 03.21 23x033 002 0001/5
JQC 00.23 02.41 57.1 00.2 00.4 05.1Ø 00.2Ø 00.42 55.31 59.61 04.82 04.0 03.21 23x033 002 0001/5
JOC 00.44 02.02 57.1 00.2 00.4 05.1Ø 00.2Ø 00.42 57.61 04.82 04.04 04.0 07.6 44x033 004 0002/5
epyTmmnisnoisnemiD leeR
eziSytitnauQ
)leeR/scP(ytitnauQ
)desaC/leeR(W F E P2 P0 D0 D1 P A0 B0 T K0
JTC 00.21 05.5 57.1 00.2 00.4 05.1Ø 05.1Ø 00.8 01.4 01.5 04.0 58.3 31x033 0002 00001/5
JLC 00.42 05.11 57.1 00.2 00.4 05.1Ø 05.1Ø 00.21 01.6 03.9 53.0 08.5 42/033 0001 00001/5
JMC 00.42 05.11 57.1 00.2 00.4 05.1Ø 05.1Ø 00.21 01.6 03.9 53.0 08.5 42/033 0001 00001/5
3-JFC 00.42 05.11 57.1 00.2 00.4 05.1Ø 05.1Ø 00.02 09.11 02.8 04.0 06.7 42x033 006 0003/5
4-JFC 00.42 05.11 57.1 00.2 00.4 05.1Ø 05.1Ø 00.61 01.01 01.21 04.0 06.7 42x033 006 0003/5
3&2-JSC 00.42 05.11 57.1 00.2 00.4 05.1Ø 05.1Ø 00.21 09.6 03.8 04.0 00.5 42x033 006 0003/5
4-JSC 00.42 05.11 57.1 00.2 00.4 05.1Ø 05.1Ø 00.61 54.9 03.8 04.0 00.5 42x033 006 0003/5
JCC 00.42 05.11 57.1 00.2 00.4 05.1Ø 05.1Ø 00.02 02.11 06.41 04.0 55.8 42x033 004 0002/5
JUC 00.42 05.11 57.1 00.2 00.4 5.1Ø 05.1Ø 00.61 02.01 53.31 53.0 55.6 42x033 006 0003/5
THE TALEMA GROUP · Magnetic Components for Universal Applications
+0.1 -0.0
W±0
.30 F±0
.10
E±0.10 P2±0.10 P0±0.10 A
A
D0
D1
P±0.10 A0±0.10
B0±
0.10
S0±0
.10
K0±0.10
T±0.05
Section A-A
W±0
.30
F±0
.10
E±0.10 P2±0.05
P0±0.10
D0
A
A P±0.10 A0±0.10
B0±
0.10
T±0.05
K0±0.10Section A-A
+0.1 -0.0
D1
28
Tape & Reel Packaging and Dimensions
Reel Dimensions (Unit : mm)
mmnisnoisnemiDleeR
epyT A B C N
31x033 033 31 2.02 001
42x033 033 42 2.02 001
23x033 033 23 2.02 001
44x033 033 44 2.02 001
THE TALEMA GROUP · Magnetic Components for Universal Applications
Inner Carton Outer Carton
A
B
N C
285
355
355
330 50
335
TALE
MA
IN
M
/Y
MM
J-10
0B-5
01
TALE
MA
IN
M
/Y
MM
J-10
0B-5
01
TALE
MA
IN
M
/Y
MM
J-10
0B-5
01
END START
Blank Components BlankMin. 160mm Min. 400mm
Drawing direction
TALE
MA
INW
k/Yr
Part
Num
ber
TALE
MA
INW
k/Yr
Part
Num
ber
TALE
MA
INW
k/Yr
Part
Num
ber
Authorised Talema Sales Representatives and Distributors
12-05THE TALEMA GROUP • Magnetic Components for Universal Applications
29
Sales & Marketing, Design and Manufacturing Facilitieshttp://www.talema-nuvotem.com
IrelandNUVOTEM TEO.CrollyCo. DonegalTel: Int. + 353 74 - 954 8666Fax: Int. + 353 74 - 954 8139Email: [email protected]
GermanyTALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 - 841 00 - 0Fax: Int. + 49 89 - 841 00 25Email: [email protected]
Eastern Europe &Czech RepublicNT MAGNETICS s.r.o.Chebská 27322 00 PlzeñTel: Int. + 420 377 - 338 351Fax: Int. + 420 377 - 338 350Email: [email protected] Site: www.ntmagnetics.cz
IndiaTALEMA ELECTRONIC PVT. LTD.Opposite the SIDCO Industrial EstateGins Towers4/5S.H/1, Omalur Main RoadSalem - 636 004, Tamil NaduTel: Int. + 91 427 - 244 1325Fax: Int. + 91 427 - 243 0034E-mail: [email protected] Site: www.talemaindia.com
UKDELTA COMPONENTS LTD.The CourtyardSeven Acres, Smallfield RoadHorne, Surrey RH6 9JPTel: Int. + 44 1342 844 555Fax: Int. + 44 1342 844 [email protected]
SpainOTTO RATING S.A.Castellnou, 31-3308017 BarcelonaTel: Int.+34 93 252 2708Fax: Int.+34 93 205 6264E-mail: [email protected] Site: www.rating.es
BeneluxISATRONICK B.V.B.A.Doolhoflaan 17B-2640 MortselTel: Int. + 32 3 448 1976Fax: Int. + 32 3 448 1195E-Mail: [email protected] Site: www.isatronick.be
PLZ 2 & 3 (less 35 & 36)H. J. MERCK & Co. GmbHHasenhöhe 12822587 HamburgTel: Int. + 49 40 87 08 63-0Fax: Int. + 49 40 87 08 63-33E-mail: [email protected]
ItalyTECHNOLASA ELETTRONICAVia Macello, 65/BI-39100 BolzanoTel: Int. + 39 0471 305 400Fax: Int. + 39 0471 305 444E-Mail: [email protected]
AustraliaTORTECH PTY. LTD.POB 194North Strathfield,Sydney, N.S.W. 2137Tel: Int. + 61 2 9642 6003Fax: Int. + 61 2 9642 6127E-Mail: [email protected] Site: www.tortech.com.au
PLZ 7BERND BIELERIndustrievertretungMax-Eyth-Straße 172379 HechingenTel: Int. + 49 7471 1804-0Fax: Int. + 49 7471 1804-10E-mail: [email protected]
Denmark & SwedenNORDTEK DANMARKHorsensvej 134DK-8300 OdderTel: Int. + 45 86 554 344Fax: Int. + 45 86 554 644E-Mail: [email protected] Site: www.nordtek.dk
AustriaTALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 841 00 - 0Fax: Int. + 49 89 841 00 25Email: [email protected]
FranceE.S.I.A5-7 Place Marcel RebuffatCourtaboeuf 7 Villejust91971 Courtaboeuf CedexTel: Int. + 33 1 6931 4410Fax: Int. + 33 1 6931 4425E-Mail: [email protected] Site: www.esia.fr
GermanyPLZ 1, 4,5, 6, 8 & 9TALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 841 00 - 0Fax: Int. + 49 89 841 00 25Email: [email protected]
USAH. F. Transformers, Chokes &InductorsALFAMAG ELECTRONICS LLC945 ParkwoodPO Box 668Rolla, Missouri 65402Tel: Int.+573 364 2422Fax: Int.+573 364 5390E-Mail: [email protected] Site: www.alfamag.com
50/60 Hz Toroidal TransformersAMVECO MAGNETICS, INC.11222 Richmond Ave., Suite 120Houston, TX 77042E-Mail: [email protected] Site: www.amveco.com
SwitzerlandBTB COMPONENTS AGIm Chlösterli 4CH-8902 UrdorfTel: Int. + 41 44 734 4888Fax: Int. + 41 44 734 4892E-mail: [email protected]
Sales Representatives
GermanyBÜRKLIN OHG MÜNCHENSchillerstr. 4180336 MünchenTel: Int.+49 89 558 75-0Fax: Int.+49 89 558 75-421E-Mail: [email protected]: www.buerklin.com
BÜRKLIN OHG DÜSSELDORFHoherweg 24540231 DüsselforfTel: Int.+49 211 9067-0Fax: Int.+49 211 9067-125E-Mail: [email protected]: www.buerklin.com
SCHUKAT ELECTRONICVERTRIEBS GMBHDaimlerstraße 2640789 MonheimTel: Int.+49 2173 9505Fax: Int.+49 2173 950999Web: www.schukat.com
RUTRONIK ELEKTRONISCHEBAULEMENTE GMBHIndustriestraße 275228 Ispringen/PforzheimTel: Int.+49 7231 801-0Fax: Int.+49 7231 82282E-Mail: [email protected]: www.rutronik.com
ItalyRUTRONIK ITALIA S.r.i21, Via CalderaCentro Direzionale S.Siro20153 MilanoTel: Int.+39 02 40951 1Fax: Int.+39 02 40951 224E-Mail: [email protected]: www.rutronik.com
UKRS COMPONENTS LTD.Birchington RoadCorbyNorthants, NN17 9RSTel: Int.+44 8457 201201Fax: Int.+44 845 850 9911www.rs-components.com
DistributorsSwitzerlandRUTRONIK ELEKTRONISCHEBAUELEMENTE AGHölzliwisenstraße 5CH-8604 VolketswilTel: Int.+41 44 947 3737Fax: Int.+41 44 947 3747E-Mail: [email protected]
THE TALEMA GROUP • Magnetic Components for ISDN / XDSL / LAN Data Communications
SummaryTOTAL PROGRAMSECTION1• TOROIDAL 50/60Hz TRANSFORMERS
SECTION 2• TOROIDAL PCB TRANSFORMERS
SECTION 3• ELEVEN GOOD REASONS TO SELECT
TALEMA TOROIDAL TRANSFORMERS
SECTION 4• CHOKES, INDUCTORS AND TRANSFORMERS
FOR POWER APPLICATIONS
SECTION 5• COMPONENTS FOR TELECOMMUNICATIONS
AND DATA LINE TECHNOLOGY
SECTION 6• CURRENT COMPENSATED EMI NOISE
SUPPRESSION CHOKES
SECTION 7• CURRENT SENSE TRANSFORMERS AND
INDUCTORS
SECTION 8• LAN MAGNETIC COMPONENTS FOR
ETHERNET APPLICATIONS
SECTION 9• TI/E1/CEPT-PRI - T3/DS3/E3/STS-1
FOR TELECOMMUNICATION PRODUCTS
SECTION 10• U INTERFACE TRANSFORMERS FOR
COMMUNICATIONS AND DATA LINE
TECHNOLOGY
SECTION 11• TRANSFORMERS FOR BROADBAND ACCESS
AND FIBRE CHANNEL INTERFACE
.
ntmagnetics
nuvotem