+ All Categories
Home > Documents > Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical...

Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical...

Date post: 13-Oct-2020
Category:
Upload: others
View: 8 times
Download: 0 times
Share this document with a friend
22
Main Catalogue Models: FlowCapt FC4 SandFlow SF4 RainFlow RF4 WindFlow WF4 ______________ Document version: v3.5
Transcript
Page 1: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

Main Catalogue

Models:

FlowCapt FC4

SandFlow SF4

RainFlow RF4

WindFlow WF4

______________

Document version: v3.5

Page 2: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

2

The ISAW sensors are robust, high performance sensors for snow, sand, rain and wind. Their construction with no mobile parts makes them ideal for a wide range of meteorological, industrial and scientific applications even in the harshest environments. This catalogue lists all ISAW sensor equipment. For more information about the specifications and operation of the sensors, please refer to the User Guide.

The articles and dimensions described in this catalogue may be subject to change.

IAV Technologies SARL www.isaw-products.com

ISAW Products Division Chemin des Couleuvres 4A, 1295 Tannay, Switzerland Tel: +41 (0)22 960 11 04 E-mail: [email protected] © IAV Technologies

Page 3: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

3

Table of contents

SENSORS ......................................................................................................................................... 4

MOUNTING KITS ............................................................................................................................. 9

FLOWCAPT SETS ............................................................................................................................ 11

SANDFLOW SETS ........................................................................................................................... 13

RAINFLOW SETS ............................................................................................................................ 15

WINDFLOW SETS .......................................................................................................................... 17

ACCESSORIES ................................................................................................................................ 19

MOUNTING EXAMPLES ................................................................................................................. 21

Page 4: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

4

SENSORS

Models

There are four sensor models:

FlowCapt FC4 for snowdrift fluxes and wind-speed monitoring

SandFlow SF4 for windblown sand and wind-speed monitoring

RainFlow RF4 for rain and hail monitoring

WindFlow WF4 for strong winds and hurricanes monitoring

Mounting kits

Each sensor needs to be fastened to a mast or a flat surface using the appropriate mounting kit. Refer to the next sections for mounting instructions.

Accessories

The USB dongle accessory (UDONG), provided with the sensors, is a direct physical connection accessory from the sensor to a USB port. It enables the sensor’s power supply and the immediate use of all the software features of the ISAW-TOOLBOX freeware. The USB dongle is generic and can thus be used or interchanged with all ISAW sensors.

TMAST is a lightweight, robust, cost-effective and universal tripod mast that is easily transportable (modular in three parts). It allows all the usual ISAW sensor mountings, as well as supporting additional sensors or all other accessories or auxiliary equipment.

For more information about the sensors and their configuration, please refer to the User Guide.

Page 5: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

5

FC4 FlowCapt

FlowCapt sensor presented with its mounting kit (FCBRA)

The FlowCapt FC4 sensor is an ultra-robust instrument measuring solid particle flux intensities and wind speeds.

Instrument with no mobile parts (totally sealed acoustic instrument)

Omni-directional (even under the highest winds)

Plug-and-Play or totally configurable (microcontroller inside)

Can be connected to almost any external central unit

SDI-12 and IoT compatible (internal memory)

Swiss made

Typical applications

Monitoring of snowdrift and snow-blowing

Solid particles mass flux and wind-speed measurements

Meteorological and scientific applications

Road security and avalanche danger

Industrial surveillance applications

Fields of application

Remote weather stations

Mining

HVAC

Tunnels

Road, rail and cable transport

Arctic navigation

Page 6: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

6

SF4 SandFlow

SandFlow sensor presented with its mounting kit (SFBRA)

The SandFlow SF4 sensor is an ultra-robust instrument measuring solid particle flux intensities and wind speeds.

Instrument with no mobile parts (totally sealed acoustic instrument)

Omni-directional (even under the highest winds)

Corrosion free and resistant to the highest winds and the most extreme conditions

Plug-and-Play or totally configurable (microcontroller inside)

Can be connected to almost any external central unit

SDI-12 and IoT compatible (internal memory)

Swiss made

Typical applications

Detection and monitoring of sand and dust storms

Mass flux and wind-speed measurement

Meteorological and scientific applications

Industrial surveillance applications

Fields of application

Remote weather stations

Roadside and railway protection

HVAC protection

Agriculture

Tunnels

Page 7: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

7

RF4 RainFlow

RainFlow sensor presented with its mounting kit (RFBRA)

The RainFlow RF4 sensor is a high precision, ultra-robust rain gauge instrument.

Non obstructable

Instrument with no mobile parts – totally sealed acoustic instrument

Universal mounting kit available

Omni-directional – even under the highest winds

Corrosion free and resistant to the highest winds and the most extreme conditions

Plug-and-Play or totally configurable – microcontroller inside

Can be connected to almost any external unit

SDI-12 and IoT compatible – internal memory

Swiss made

Typical applications

Monitoring of rain and hail precipitation

High-resolution disdrometry (number and size of raindrops)

Offshore weather buoys

Forecast of soil erosion

Industrial surveillance applications

Fields of application

Weather stations

Agriculture

Hydrology

Control of land and air traffic

Dam surveillance

Meteorological and scientific applications

Page 8: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

8

WF4 WindFlow

WindFlow sensor presented with its mounting kit (WFBRA)

The WindFlow WF4 sensor is an unbreakable, hurricane-resistant wind-speed instrument.

Instrument with no mobile parts – totally sealed acoustic instrument

Universal mounting kit available

Omni-directional – even under the highest winds

Corrosion free and resistant to the highest winds and the most extreme conditions

Plug-and-Play or totally configurable – microcontroller inside

Can be connected to almost any external central unit

SDI-12 and IoT compatible – internal memory

Swiss made

Typical applications

Wind speed monitoring of strong winds and hurricanes

Surveillance of high wind areas

Securisation of high-voltage lines

Meteorological, industrial, and scientific applications

Railway surveillance

Fields of application

Highly exposed weather stations

Marine

Road, rail and cable transport

Industrial installations

Agriculture

Page 9: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

9

MOUNTING KITS

FC4 or SF4 mounting kit

FC4/SF4 mounting kit is composed of 2 cylindrical arms fastened to V brackets adaptable to a mast of outer diameter between 22 and 124 mm.

DIMENSIONS

Notes: All dimensions are in mm All screw threads are M10.

Page 10: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

10

RF4 or WF4 mounting kit

RF4/WF4 mounting kit is composed of 1 flat arm fastened to V brackets adaptable to a mast of outer diameter between 22 and 124 mm. The arm is from 0° to 90° tiltable (compatibility with all possible orientation of mast).

DIMENSIONS

Notes: All dimensions are in mm All screw threads are M10.

Page 11: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

11

FLOWCAPT SETS

ORDER REF.

Description

Set content

Sen

sor

FC4

Mo

un

tin

g ki

t

Trip

od

mas

t

USB

do

ngl

e

FC4 FlowCapt sensor only 1 1

FCBRA FlowCapt sensor with mounting kit 1 1 1

FC2MA Pair of FlowCapt sensors fastened on a tripod mast 2 2 1 2

FC4 FC2MA

FCBRA

Page 12: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

12

FlowCapt sets dimensions

FC4 FC2MA

Notes: All dimensions are in mm Default cable length: 3 m

FCBRA

Page 13: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

13

SANDFLOW SETS

ORDER REF.

Description

Set content

Sen

sor

SF4

Mo

un

tin

g ki

t

Trip

od

mas

t

USB

do

ngl

e

SF4 SandFlow sensor only 1 1

SFBRA SandFlow sensor with mounting kit 1 1 1

SF2MA Pair of SandFlow sensors fastened on a tripod mast 2 2 1 2

SF4 SF2MA

SFBRA

Page 14: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

14

SandFlow sets dimensions

SF4 SF2MA

Notes: All dimensions are in mm Default cable length: 3 m

SFBRA

Page 15: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

15

RAINFLOW SETS

ORDER REF.

Description

Set content

Sen

sor

RF4

Mo

un

tin

g ki

t

Trip

od

mas

t

USB

do

ngl

e

RF4 RainFlow sensor only 1 1

RFBRA RainFlow sensor with mounting kit 1 1 1

RFMAS RainFlow sensor fastened on a tripod mast 1 1 1 1

RF4 RFMAS

RFBRA

Page 16: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

16

RainFlow sets dimensions

RF4 RFMAS

Notes: All dimensions are in mm Default cable length: 3 m

RFBRA

Page 17: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

17

WINDFLOW SETS

ORDER REF.

Description

Set content

Sen

sor

WF4

Mo

un

tin

g ki

t

Trip

od

mas

t

USB

do

ngl

e

WF4 WindFlow sensor only 1 1

WFBRA WindFlow sensor with mounting kit 1 1 1

WFMAS WindFlow sensor fastened on a tripod mast 1 1 1 1

WF4 WFMAS

WFBRA

Page 18: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

18

WindFlow sets dimensions

WF4 WFMAS

Notes: All dimensions are in mm Default cable length: 3 m

WFBRA

Page 19: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

19

ACCESSORIES

ORDER REF.

Description

Sensor set

FC4

FCB

RA

FC2

MA

SF4

SFB

RA

SF2

MA

RF4

RFB

RA

RFM

AS

WF4

WFB

RA

WFM

AS

UDONG USB dongle 1 1 2 1 1 2 1 1 1 1 1 1

TMAST Tripod mast 1 1 1 1

UDONG TMAST

Note: Compatible with all ISAW sensors.

Note: The mast is dismountable (3 parts) and equipped with 3 tiltable legs and a lightning rod.

Page 20: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

20

Accessories dimensions

UDONG TMAST

Note: All dimensions are in mm

Page 21: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

21

MOUNTING EXAMPLES

On a vertical, horizontal (or oblique) cylindrical mast with an outer diameter of 40 mm, use the provided V brackets.

On a vertical, horizontal (or oblique) cylindrical mast with an outer diameter of 25 mm, use the provided V brackets and reduction shims.

On a flat surface, screw the V brackets (or the arm directly) onto the surface.

Page 22: Main Catalogue - ISAW Products · SDI-12 and IoT compatible – internal memory Swiss made Typical applications Monitoring of rain and hail precipitation High-resolution disdrometry

ISAW Sensors M a i n C a t a l o g u e FC4 SF4 RF4 WF4

22

Mounting as part of an ISAW station

Thanks to their excellent mechanical, electrical and software compatibility, the sensors are compatible with almost any kind of existing or planned meteorological or industrial installation (for more information, please refer to the User Guide available at www.isaw-products.com).

FlowCapt SandFlow

RainFlow WindFlow


Recommended