Main Hardware

Main Hardware

Main PC to Board Connection via PX200

Main Hardware

How to develop PIC microcontroller programming with PIC Station-3

(1) Install all development software tools.• MPLAB V8 or higher• HI-TECH C compiler Lite mode

(2) Use the PIC Station-3 board with • Microchip’s ICD2• INEX’s PX-200/PX-700 USB programmer.

(3) Construct the experiment circuit on breadboard of PIC Station-3 board.

(4) Create the C project file and source file in MPLAB. Compile the experiment project to get the HEX file for downloading to PIC devices.

Software Required

Software Required

Installing MPLAB IDE

1) Unzip “MPLAB_IDE_8_36.zip” from the tools direction in the CDROM2) Run “setup.exe”

Software Required

Software Required

Software Required

Software Required

HOW TO PROGRAM

HOW TO PROGRAM

HOW TO PROGRAM

HOW TO PROGRAM

HOW TO PROGRAM

HOW TO PROGRAM

HOW TO PROGRAM

HOW TO PROGRAM

HOW TO PROGRAM

WRITING THE CODE

WRITING THE CODE

COMPILING

UPLOADING

UPLOADING

TESTING

TESTING