System 3R

Machine table layoutMakino wire EDM‘s & System 3R Tooling

2

CONTENTS

3141, horizontal clamping ......................................................................................... page 3DUO43 with horizontal 3Rulers .................................................................................. page 4DUO43 with vertical 3Rulers....................................................................................... page 5DUO64, horizontal clamping ..................................................................................... page 6DUO64, vertical clamping .......................................................................................... page 7EH8, EE8 & EC8, horizontal clamping ......................................................................... page 8EU43, horizontal clamping ......................................................................................... page 9EU64, horizontal clamping ....................................................................................... page 10SP43, horizontal clamping ........................................................................................ page 11SP43 (Japan), horizontal clamping ............................................................................ page 12SP43 (USA), horizontal clamping .............................................................................. page 13SP43 (USA), horizontal clamping .............................................................................. page 14SP64, horizontal clamping ........................................................................................ page 15SP64, vertical clamping ............................................................................................ page 16U86, horizontal clamping ......................................................................................... page 17

3

MIC-2107 93.04 Subject to modifications.

3R Concept WEDMing in Makino 3141

3R-239-545

2x3R-200.39J-2

3R-200.3J-2 Reference element 345 mm,pitch 50 mm, (50 mm from thetable edge).

3R-239-545 3Ruler 545x60x30 mm, completewith holders, supports andclamping details.

3R-200.3J-2 Referenz Element 345 mm,Lochabstand 50 mm, (50 mmvon der Tischkante).

3R-239-545 3R Lineal 545x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen

3R-200.3J-2 Elément de référence 345 mm,distance des trous 50 mm, (distancedu bord de la table 50 mm).

3R-239-545 3Règle 545x60x30 mm, règlecompléte avec butées,supports et details de serrage.

3R-200.3J-2 Base a coda di rondine 345 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 50 mm).

3R-239-545 3Riga 545x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.

Note: Poblems to reach the working area with, 3R-210J-1, 3R-226J, 3R-294.2, 3R-294.3,3R-201J, 3R-204

4

system 3R

System 3R International ABSorterargatan 1, 162 50 VällingbySweden

Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com

MIC2751 Makino DUO43Date: 2010-01-27Reference elements: 3R-200.49J-13Ruler: 3R-239-495

5

system 3R

System 3R International ABSorterargatan 1, 162 50 VällingbySweden

Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com

MIC2752 Makino DUO43Date: 2010-01-27Reference elements: 3R-200.49J-13Ruler: 3R-239-345

6

MIC2340 2008 11

System 3R International AB Tel: +46 8 620 20 00 Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 Sweden www.system3r.com

3R-200.49J-1 (2 pcs)

Makino DUO64

3R-239-695 (2 pcs)

7

MIC2339 2008 11

System 3R International AB Tel: +46 8 620 20 00 Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 Sweden www.system3r.com

3R-200.3J-1 (4 pcs)

Makino DUO64

3R-239-445 (2 pcs)

8

MIC-2406 93-11 Subject to modifications.

3R Concept WEDMingin Makino EH 8 / EE 8 / EC 8

2x3R-239-950

4x3R-200.3J-4

3R-200.3J-2 Reference element 345 mm,pitch 50 mm, (80 mm from thetable edge).

3R-239-950 3Ruler 950x86x36 mm, completewith holders, supports andclamping details.

3R-200.3J-2 Referenz Element 345 mm,Lochabstand 50 mm, (80 mmvon der Tischkante).

3R-239-950 3R Lineal 950x86x36 mm,komplett mit Haltern, Anschlägenund Klemmteilen

3R-200.3J-2 Elément de référence 345 mm,distance des trous 50 mm, (distancedu bord de la table 80 mm).

3R-239-950 3Règle 950x86x36 mm, règlecompléte avec butées,supports et details de serrage.

3R-200.3J-2 Base a coda di rondine 345 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 80 mm).

3R-239-950 3Riga 950x86x36 mm, completocon riscontri, supporti e dettaglidi fissaggio.

Note: Problems to reach the working area with 3R-294.2, 3R-294.3, 3R-294.4, 3R-294.5 3R-201J, 3R-204, 3R-210J-1, 3R-226J and others.

9

MIC-2111 2002-08 Subject to modifications.

System 3R International AB Tel: +46 (0) 8 620 2083 home page: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 (0) 8 384516 http://www.system3r.seSweden

3R Concept WEDMingin Makino SP43 / EU 43

3R-200.6J-1

2x3R-200.4J-1

3R-200.4J-1 Elément de référence 395 mm,distance des trous 50 mm, (distancedu bord de la table 40 mm).

3R-200.6J-1 Elément de référence 545 mm,distance des trous 50 mm, (distancedu bord de la table 40 mm).

3R-239-5 15 3Règle 515x60x30 mm, règlecompléte avec butées,supports et details de serrage.

3R-200.4J-1 Base a coda di rondine 395 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 40 mm).

3R-200.6J-1 Base a coda di rondine 545 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 40 mm).

3R-239-515 3Riga 515x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.

3R-200.6J-1 Referenz Element 545 mm,Lochabstand 50 mm, (40 mmvon der Tischkante).

3R-239-515 3R Lineal 515x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen

3R-200.4J-1 Referenz Element 395 mm,Lochabstand 50 mm, (40 mmvon der Tischkante).

3R-200.4J-1 Reference element 395 mm,pitch 50 mm, (40 mm from thetable edge).

3R-200.6J-1 Reference element 545 mm,pitch 50 mm, (40 mm from thetable edge).

3R-239-515 3Ruler 515x60x30 mm, completewith holders, supports andclamping details.

3R-239-515

system 3R

10

3R Concept WEDMing in Makino EU 64

MIC-2530 00-03 Subject to modifications.

3x3R-200.6J-1

3R-239-745

3R-200.6J-1 Reference element 545 mm,pitch 50 mm, (90 mm from thetable edge).

3R-239-745 3Ruler 745x86x36 mm, completewith holders, supports andclamping details.

3R-200.6J-1 Referenz Element 545 mm,Lochabstand 50 mm, (90 mmvon der Tischkante).

3R-239-745 3R Lineal 745x86x36 mm,komplett mit Haltern, Anschlägenund Klemmteilen

3R-200.6J-1 Elément de référence 5 45 mm,distance des trous 50 mm, (distancedu bord de la table 90 mm).

3R-239-745 3Règle 745x86x36 mm, règlecompléte avec butées,supports et details de serrage.

3R-200.6J-1 Base a coda di rondine 545 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 90 mm).

3R-239-745 3Riga 745x86x36 mm, completocon riscontri, supporti e dettaglidi fissaggio.

11

MIC-2111 2002-08 Subject to modifications.

System 3R International AB Tel: +46 (0) 8 620 2083 home page: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 (0) 8 384516 http://www.system3r.seSweden

3R Concept WEDMingin Makino SP43 / EU 43

3R-200.6J-1

2x3R-200.4J-1

3R-200.4J-1 Elément de référence 395 mm,distance des trous 50 mm, (distancedu bord de la table 40 mm).

3R-200.6J-1 Elément de référence 545 mm,distance des trous 50 mm, (distancedu bord de la table 40 mm).

3R-239-5 15 3Règle 515x60x30 mm, règlecompléte avec butées,supports et details de serrage.

3R-200.4J-1 Base a coda di rondine 395 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 40 mm).

3R-200.6J-1 Base a coda di rondine 545 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 40 mm).

3R-239-515 3Riga 515x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.

3R-200.6J-1 Referenz Element 545 mm,Lochabstand 50 mm, (40 mmvon der Tischkante).

3R-239-515 3R Lineal 515x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen

3R-200.4J-1 Referenz Element 395 mm,Lochabstand 50 mm, (40 mmvon der Tischkante).

3R-200.4J-1 Reference element 395 mm,pitch 50 mm, (40 mm from thetable edge).

3R-200.6J-1 Reference element 545 mm,pitch 50 mm, (40 mm from thetable edge).

3R-239-515 3Ruler 515x60x30 mm, completewith holders, supports andclamping details.

3R-239-515

system 3R

12

System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.seSweden

WEDMing with S3R

13

System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.seSweden

WEDMing with S3R

14

WEDMing with S3R

System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.seSweden

15

system 3R MIC-2113 2002-08 Subject to modifications.

3R Concept WEDMingin Makino SP 64

System 3R International AB Tel: +46 (0) 8 620 2083 home page: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 (0) 8 384516 http://www.system3r.seSweden

3R-200.3J-1 Elément de référence 345 mm,distance des trous 50 mm, (distancedu bord de la table 40 mm).

3R-200.49J-1 Elément de référence 495 mm,distance des trous 50 mm, (distancedu bord de la table 40 mm).

3R-239-715.86 3Règle 715x86x36 mm, règlecompléte avec butées,supports et details de serrage.

3R-200.3J-1 Base a coda di rondine 345 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 40 mm).

3R-200.49J-1 Base a coda di rondine 495 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 40 mm).

3R-239-715.86 3Riga 715x86x36 mm, completocon riscontri, supporti e dettaglidi fissaggio.

3R-200.3J-1 Reference element 345 mm,pitch 50 mm, (40 mm from thetable edge).

3R-200.49J-1 Reference element 495 mm,pitch 50 mm, (40 mm from thetable edge).

3R-239-715.86 3Ruler 715x86x36 mm, completewith holders, supports andclamping details.

3R-200.49J-1 Referenz Element 495 mm,Lochabstand 50 mm, (40 mmvon der Tischkante).

3R-239-715.86 3R Lineal 715x86x36 mm,komplett mit Haltern, Anschlägenund Klemmteilen

3R-200.3J-1 Referenz Element 345 mm,Lochabstand 50 mm, (40 mmvon der Tischkante).

2x3R-200.3J-1

2x3R-200.49J-1

3R-239-715.86 (K-30668)

16

System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.com Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.se Sweden

WEDMing with S3R

17

3R Concept WEDMing in Makino U86

MIC-2532 00-09 Subject to modifications.

3R-239-950

2x3R-200.6J-1

2x3R-200.3J-1

3R-200.6J-1 Referenz Element 545 mm,Lochabstand 50 mm, (90 mmvon der Tischkante).

3R-200.3J-1 Referenz Element 345 mm,Lochabstand 50 mm, (90 mmvon der Tischkante).

3R-239-950 3R Lineal 950x86x36 mm,komplett mit Haltern, Anschlägenund Klemmteilen

3R-200.6J-1 Reference element 545 mm,pitch 50 mm, (90 mm from thetable edge).

3R-200.3J-1 Reference element 345 mm,pitch 50 mm, (90 mm from thetable edge).

3R-239-950 3Ruler 950x86x36 mm, completewith holders, supports andclamping details.

3R-200.6J-1 Elément de référence 545 mm,distance des trous 50 mm, (distancedu bord de la table 90 mm).

3R-200.3J-1 Elément de référence 345 mm,distance des trous 50 mm, (distancedu bord de la table 900 mm).

3R-239-950 3Règle 950x86x36 mm, règlecompléte avec butées,supports et details de serrage.

3R-200.6J-1 Base a coda di rondine 545 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 90 mm).

3R-200.3J-1 Base a coda di rondine 345 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 90 mm).

3R-239-950 3Riga 950x86x36 mm, completocon riscontri, supporti e dettaglidi fissaggio.

3R-200.6J-1 and 3R-200.3J-1 can be moved50 mm (on each side) closer to the table edge, for use of other 3R-tooling.

T-23

52-E

15.

01©

GF

Mac

hini

ng S

olut

ions

, Sys

tem

3R

Inte

rnat

iona

l AB

, 201

5Su

bjec

t to

mod

ifiac

tions

.

System 3R’s Customer Services is uniquely positioned to help you maximize the availability, value, precision and productivity of your System 3R equipment. Our cost-effective, customer-centric and expert services put your success at the center, ramp up your productivity and ensure predictable, uninterrupted uptime. System 3R’s service engineers are your expert partners for a wide range of success-triggering services.

For more info ask your local System 3R dealer.

For contact details, please refer to: www.system3r.com.

+ Ensuring productivity.

+ Reducing running costs and wasted parts.

+ Maximizing the return on your System 3R investments.

+ Extending the product lifetime of your System 3R equipment while maintaining optimum precision.

+ Ensuring robot cell safety satisfies present machine directives.

Optimize the uptime of your equipment with our Customer Services