2
MALTA ITERCOLOR - F | PRODUCT FOR COLORED PAVEMENTS 1. APPLICATION MALTA ITERCOLOR F is a product specially indicated for the realization of colored pavements for sports fields, sidewalks, avenues, parking lots, cycle tracks and general urban furnishings. MALTA ITERCOLOR F is manufactured in two standard colours red and green, but on demand it can be produced in different colours. It can be easily applied as it is perfectly soluble in water. It can be applied on dence asphalt concrete with rubber brush. For the correct laying, it must be applied on surfaces without humidity and in good conditions, (free of cracks, holes, etc.) at daily average temperatures included between 15 and 35°C. Before use or mixing, it is essential to refer to the product's user guide. 2. DOSAGE MALTA ITERCOLOR-F's dosage varies according to the surface porosity and the finished thickness. Usually, the applied quantity varies from 2 Kg\m² to 3 Kg\m² for an average thickness of 1-2 mm. 3. COMPOSITION MALTA ITERCOLOR-F is formed of polyvalent vinyl resin, inorganic colorings and selected quartz powder 4. PHYSICAL PROPERTIES Aspect viscous mixture Colour red /green/other colors Density at 20 °C 1,65 – 1,75 g/cm³ Viscosity at 25 °C 1740 ± 50 cP
