Management of EPC and EPCM projects
About company
▪ Engineering▪ Design▪ Construction and installation
▪ Repair, service▪ Heat and power generation▪ Equipment manufacturing
Group of companies IED is an integrated corporate team of partner companies which join their resources into an engineering complex
STRUCTUREABOUT COMPANY BUSINESS DIRECTIONS REFERENCE LIST
4 projectInstitute's
4,000 employees
700 implemented projects for
the last 3 years
400 units of special machinery
and mechanisms
50 000 sq. m.of production rooms
Annual average turnoverof IED Group of
companies for 3 yearsmade up 12 RUB bn
(billion. Rub)
STRUCTUREABOUT COMPANY BUSINESS DIRECTIONS REFERENCE LIST
PersonnelTotal number Work at the Company
more than 5 years With Higher education
Total number 3900 1408 1621
Managers 386 245 332
Production personnel,
including:2938 955 1049
Managers of Construction 31 13 31
Designers 627 339 622
Site managers 191 84 176
Foremen 118 54 79
Workers 1970 465 141
Others 576 208 240
STRUCTURE OF IED-HOLDING
PROJECT MANAGEMENT (ЕРС(М)
REPRESENTATION ABROAD
• Representative in the Hashemite Kingdom of Jordan• Representation in the United Arab Emirates• Branch office in Turkmenistan• Branch office in Kazakhstan
• MC “IED-Holding” LLC
ENGINEERING AND DESIGN
• TatNIPIenergoprom• IED- INEL• TatBelEnergoProject• EC EnergoDevelopment• NovosibirskEnergoProject
CONSTRUCTION, INSTALLATION,REPAIR, SERVICE
• IED- Promstroy• IED – Montazh (Assembly)• IED –KamEnergoRepair• IED-Engineering• M12 Systems
POWER AND HEAT SUPPLY
• IED-GenerationElabuga Heat Supply CompanyZelenodolsk Heat Supply Сompany
EQUIPMENT MANUFACTURING
• RU-Engineering• ServisMontazhIntegratsiya• IED-Energy• KamEnergoMash• IED- EnergySaving
STRUCTUREABOUT IED-HOLDING BUSINESS DIRECTIONS REFERENCE-LIST
GEOGRAPHY OF ACTIVITY>10 near and far-abroad countries
>30 regions of Russia
STRUCTUREABOUT COMPANY BUSINESS DIRECTIONS REFERENCE LIST
worksIn Russia, in the countries of Asia,in the Middle Eastand in Latin America
030201
KEY DIRECTIONS
Project management(ЕРС/ЕРСМ)
Engineering and design
Construction, installation, repair, service. Equipment manufacturing.
04Heat and power generation
STRUCTUREABOUT IED-HOLDING BUSINESS DIRECTIONS REFERENCE-LIST
7
ЕРСМ: PROJECT MANAGEMENT
Conception Design(Feasibility)
Design(FEED, development of construction documents)
Implementation(supply, assembly, construction, commissioning, automation)
Engineering support and service(repair, service, audit, diagnostics)
Cost optimization Reduction of project implementation
deadlines
Optimal solution Management of changes
“A window” principle
Eliminationof subcontractor risks
ENGINEERING AND DESIGN
PROJECT MANAGEMENT
CONSTRUCTION, REPAIR,EQUIPMENT MANUFACTURING
GENERATION BIOENGINEERING-NANOTECHNOLOGIES
ENGINEERING
Examination and audit Concept Design and survey work, support for design specifications and estimates expertise
Engineering support of construction(designer supervision, installation supervision)
Plant handover for commissioning(commissioning, Accepted Test Procedures)
Cost reductionDiary and network
schedulingIncreased efficiency
in operation and ownership
Design scope of work
“A window” principle
Ability to choose the most effective
option
ENGINEERING AND DESIGN
PROJECT MANAGEMENT
CONSTRUCTION, REPAIR,EQUIPMENT MANUFACTURING
GENERATION BIOENGINEERING-NANOTECHNOLOGIES
DESIGN
Performance specification, technical concept
Pre-investment feasibility study
Front-end engineering design
Project design document
Project archive Interrelations with equipment
manufacturers
Typicaland unified
solutions
Designer supervision, expertise Construction design documents
Modern technologies(BIM-design, 3D)
Remote controlfrom the customer's
side
Solution of technically complex
non-typical tasks
ENGINEERING AND DESIGN
PROJECT MANAGEMENT
CONSTRUCTION, REPAIR,EQUIPMENT MANUFACTURING
GENERATION BIOENGINEERING-NANOTECHNOLOGIES
CONSTRUCTION AND ASSEMBLY
Site preparation General civil works Assembly of main and auxiliary equipment
Electrical fitting works
Works on installation of external and internal engineering networks and communications
Installation of processing equipment and engineering system
Commissioning and testing
Installation of instrumentation and controls, Process Control Systems
ENGINEERING AND DESIGN
PROJECT MANAGEMENT
CONSTRUCTION, REPAIR,EQUIPMENT MANUFACTURING
GENERATION BIOENGINEERING-NANOTECHNOLOGIES
REPAIR AND SERVICE
Diagnostics, fault detection Rehabilitation and repair
Modernization Prolongation of repair interval
Own base Close to the Customer Manufacture of spare parts
Service
Fix-as-Fail Service on condition
ENGINEERING AND DESIGN
PROJECT MANAGEMENT
CONSTRUCTION, REPAIR,EQUIPMENT MANUFACTURING
GENERATION BIOENGINEERING-NANOTECHNOLOGIES
IED-Engineering
IED-Energy
KamEnergoRemont
NPP RU-Engineering
ServisMontazhIntegratsiya
Manufacture of electrical equipment, systems of control, distribution and energy conversion; packaged pumping stations; pressure and absolute pressure sensors
Production of packaged-modular boiler houses, gas powered electrical generators in container version
Repair of power and industrial equipment
Manufacture of frequency converters, soft starters, static var generators, software and hardware complexes, bench test equipment, robotic systems, power stations, block-modular buildings
Manufacture of low-voltage and medium-voltage switchboard equipment, automation systems
ELECTROTECHNICALEQUIPMENT
NON-STANDARD EQUIPMENTAND SPAREPARTS
PACKAGED MODULAR BOILERHOUSES
PROCESS CONTROL SYSTEM
ROBOTICCOMPLEX
KamEnergoMashManufacture of spare parts, components and non-standard equipment
EQUIPMENT MANUFACTURING
ENGINEERING AND DESIGN
PROJECT MANAGEMENT
CONSTRUCTION, REPAIR,EQUIPMENT MANUFACTURING
GENERATION BIOENGINEERING-NANOTECHNOLOGIES
GENERATION AND POWER SUPPLY
ELABUGA HEAT SUPPLY COMPANY
ZELENODOLSK HEAT SUPPLY СOMPANY
OPERATION OF ENERGYSYSTEMS AT ENTERPRISES
Operation of hazardous industrial facility (HIF)
Design, construction and operation of Small
Energy facilities
Management of generating facilities
Production, transportation and sale of heat and electric energy
for industrial enterprises and housing and communal utilities
Adjustment of heat networks
ENGINEERING AND DESIGN
PROJECT MANAGEMENT
CONSTRUCTION, REPAIR,EQUIPMENT MANUFACTURING
GENERATION BIOENGINEERING-NANOTECHNOLOGIES
Reference-list of key projectsHeat power industry | Power generating industry | Oil and gas industry
KAZAN POWER PLANT-2
EPC project for turnkey construction of combined cycle plant 220 MW
Nizhnekamsk 220 MW Power Plant
Modernization, supplies and installation of 220 MWsteam turbines
Power plant in Syctyvkar
Turnkey construction of Power plant 4,8 MW on wood wastes
KAZAN POWER PLANT-3
Erection of a waste heat boilerErection of Gas Turbine Unit 9HA.01 GE of 386,84 MW with electro generatorInstallation of central line and plant auxiliary equipment
COMPLEX OF PETROCHEMICAL AND OIL REFINERY PLANTS FOR JSC TANECO
Participation in construction of Complex of petrochemical and oil refinery plants in Nizhnekamsk, Republic of Tatarstan
SYZRAN REFINERY
Steelwork erection and pipelining
INDUSTRIAL AGRICULTURAL PARK ZAMAN
Turnkey construction of industrial agricultural park in Zainsk, Republic of Tatarstan
AFGHANISTAN
Reconstruction of hydro generating unit No. 1 and full repair of hydro generating unit No. 3 with a capacity of 25 MW each at Hydro PP Naglu
SCHELOKOV SUBSTATION
Turnkey construction of Schelokov Substation 500 kV
OHL-220 KV SCHELOKOV –CENTRAL
Turnkey construction of overhead line -220 kV
SUBSTATION BUGULMA
Reconstruction of outdoor switchgear 500kV
Substation Begishevo
Turnkey construction of 220 kV Begishevo Substation
TURKMENISTAN
Overhaul and reblading of 6 gas turbine units THM 1304-10 at Compressor station Korpeje
TURKMENISTAN
Improvement and construction of gas-lift compressor station of Keymir oilfield
Thanks for your attention!