Date post: | 07-Apr-2018 |
Category: |
Documents |
Upload: | albert-van-der-westhuizen |
View: | 215 times |
Download: | 0 times |
of 36
8/6/2019 Management of Surface Mines
1/36
THE MANAGEMENT OF SURFACE
MINES
NAME OF AUTHOR:
A.C. VAN DER WESTHUIZEN
Submitted as a partial requirement for the course POY 783
DATE: 14 MAY 2010
8/6/2019 Management of Surface Mines
2/36
................................ ................................ ................................ ................................ ................................ ....... POY 783ii
ABSTRACT
THE MANAGEMENT OF SURFACE MINES
ALBERT VAN DER WESTHUIZEN
In a surface mining operation there are a number of core processes or systems that make up the mining
value stream. These processes or systems however cannot function effectively without the
contributions from service functions that provide specialised services in support of their activities.
In order for the mining systems to effectively deliver on their mandate, coordination between the
departments responsible for systems and sub systems within the mining value stream as well as
between these departments and service departments are paramount.
The purpose of this assignment was to review and analyse the management structure in a surface mine
taking into account both the departments involved in the main value stream as well as service
departments and how communication and integration between departments, processes and systems are
achieved.
The information and insights presented were obtained from literature study as well as from
observations by the author of organisations, including a surface mining operation, over the last 18years.
8/6/2019 Management of Surface Mines
3/36
................................ ................................ ................................ ................................ ................................ ....... POY 783iii
TABLE OF CONTENTS
1. INTRODUCTION 2
1.1 Background to Assignment and General Information 2
1.2 Problem Statement 2
1.3 Objectives 2
1.4 Methodology 2
2. RESULTS FROM LITERATURE STUDY 5
3. RESULTS 12
4. ANALYSIS AND EVALUATION OF RESULTS 14
5. CONCLUSIONS 28
6. RECOMMENDATIONS 31
8/6/2019 Management of Surface Mines
4/36
................................ ................................ ................................ ................................ ................................ ....... POY 783iv
LIST OF FIGURES
Figure 4.1 XXXXX Colliery organisational structure...p15
Figure 4.2 XXXX organisational structurep16
Figure 4.4.1 XXXXX Colliery mining value stream mapp17
Figure 4.4.2 Organisational structure driven by geographical and functional considerations...p18
8/6/2019 Management of Surface Mines
5/36
................................ ................................ ................................ ................................ ................................ ....... POY 783v
LIST OF SYMBOLS
XXXXX
CSG
GPS
HRDHS&E
IR
IT
JIT
JV
KPI
MBOMDW
MISMLM
MTPA
RBCTROMSIPOC
SLASMS
SOP
XXXXXX XXXXX XXX South Africa
Customer Sector Group
Global Positioning System
Human Resource DevelopmentHealth Safety & Environment
Industrial Relations
Information Technology
Just In Time
Joint Venture
Key Performance Indicator
Management By ObjectiveMission Directed Work teams
Management Information SystemMulti Level Meeting
Million Ton Per Annum
Richards Bay Coal TerminalRun Of MineSupplier Inputs Process Outputs Customer
Service Level AgreementShort Message Service
Standard Operating Procedure
8/6/2019 Management of Surface Mines
6/36
THE MANAGEMENT OF S URFACE MINES
................................ ................................ ................................ ................................ ................................ . POY 7831
CHAPTER 1
MOTIVATION FOR THIS STUDY
Chapter 1 details the problem statement, objectives to be achieved and the methodology to be used.
8/6/2019 Management of Surface Mines
7/36
Chapter 1 Motivation for this study
1. INTRODUCTION
1.1 Background to Assignment and General Information
Surface mining operations, like all other organisations, have an organisational structure through which
the activities of the organisation are directed in order to achieve its primary and secondary objectives.
Although the core value stream processes are to a certain extent unique to a surface mining operation,
the service departments, and the ways in which they support the core functions, as well as how
communication, integration and coordination take place are similar to other organisations.
1.2 Problem Statement
Conduct a review and analysis of the management structure in surface mines and address the methods
by which a surface mine is managed. Specific emphasis is to be given to:
y Management and service departments
y The role of service departments
y The role of sub-system departments within mining
y How various departments communicate and integrate in terms of services provided and the
role in overall mine management.
1.3 Objectives
In order to address the problem statement as defined the following objectives were set:
1.3.1 Conduct literature study
1.3.2 Review management structure of a surface mining operation
1.3.3 Review role of support departments
1.3.4 Review methods used to communicate and integrate between departments
1.4 Methodology
In order to satisfy the objectives of the review the following methodology was followed:
i. Literature search a literature search was done focussing on:
a. management and organisational design principles and their application in
organisations
8/6/2019 Management of Surface Mines
8/36
Chapter 1 Motivation for this study
................................ ................................ ................................ ................................ ................................ . POY 7833
b. methods used in organisations to achieve control, coordination, communication
and integration
ii. Case study XXXXX Colliery and XXXXX was analysed as a case study in order to
observe the practical implementation of the aspects researched during the literature study.
8/6/2019 Management of Surface Mines
9/36
THE MANAGEMENT OF S URFACE MINES
CHAPTER 2
LITERATURE STUDY
Chapter 2 summarises the outcome of the literature study done on how organisations are structured,
the factors that influence the structure of a particular organisation and the methods that organisations
use to communicate and integrate the activities of various functions.
8/6/2019 Management of Surface Mines
10/36
Chapter 2 Results of literature study
................................ ................................ ................................ ................................ ................................ . POY 7835
2. RESULTS FROM LITERATURE STUDY
2.1. Management Approaches
A management approach is the overall method of management which aims to enable all
employees to manage input factors in such a way as to achieve the desired output. Modernmanagement approaches consist of components from a variety of management approaches
developed and used since the start of the Industrial Revolution. These approaches can be
grouped into so called classicaland contemporary approaches.
Classical approaches include the following management approaches:
y Systematic
y Scientific
y Bureaucratic
y Administrative
y Human relations and resources
Classical approaches had serious limitations even when used jointly. The following
contemporary approaches developed over a span of approximately 50 years post World War
II as business leaders and planners sought to overcome the challenges of the modern
organisation:
y Quantitative
y Organisational behaviour and human behavioural
y Systems theory
y Contingency theory
2.2 Organisational structure
Organisational structure refers to:
y the way work is divided and
y how the organisation achieves coordination between various work activities.
The design of the organisational structure needs to take into account the following
principles:
y division of labour or specialisation
y distribution of authority
8/6/2019 Management of Surface Mines
11/36
Chapter 2 Results of literature study
................................ ................................ ................................ ................................ ................................ . POY 7836
y departmentalisation
y span of control
y line and staff
y
unity principle
2.2.1 Division of labour or specialisation
Division of labour or specialisation refers to the scope of individual tasks. A high degree of
specialisation in an organisation implies that work is broken down into relatively small
subtasks that are allocated to individuals and at which they can achieve a high level of
expertise through task repetition. This principle is the key advantage achieved from grouping
people in order to produce output. Automobile assembly plants are good examples of
specialisation.
2.2.2 Distribution of authority or delegation
Distribution of authority or delegation is the giving of the legitimate right to influence or
direct employee activities. Coordination problems not solved by standardisation require
escalation in order for resolution to take place. Furthermore, all work in an organisation
cannot be performed by the manager alone; he/she needs to accomplish goals through the
efforts of others.
Effective delegation depends on 5 major principles:
i.
Equal authority and responsibility: Employees to whom a task has been delegatedshould also be given the commensurate authority required to accomplish the task.
ii. Delegate to lowest organisational level possible: Tasks should be delegated to the
level at which employees with the right knowledge and training can act responsibly
on behalf of the organisation.
iii. Manage by exception: The manager should only become involved personally in
decisions when an exception to the work routine of the subordinate occurs.
iv. Tell the Whatand theHow when delegating: An effective delegator ensures that the
employee not only understands the whatthat needs to be accomplished when a task is
delegated, but also ensures that the subordinate understands how the task is to be
carried out.
v. The delegator remains accountable: Superiors do not escape responsibility for the
performance of subordinates once a task has been delegated.
8/6/2019 Management of Surface Mines
12/36
Chapter 2 Results of literature study
................................ ................................ ................................ ................................ ................................ . POY 7837
2.2.3 Departmentalisation
Departmentalisation refers to the way jobs are grouped together in an organisation in order to
accomplish work. As work units grow in size it becomes necessary to subdivide the
organisation into smaller work units so that unit managers are not overwhelmed by too many
subordinates. Several different bases exist from which to choose when setting up departments
e.g. function or purpose, territorial and product divisional. A 4 th type, the Matrix design,
overlays a project or product design with a functional design in organisations where complex
projects are frequently executed e.g. aerospace firms.
2.2.4 Span of control
Span of control is the number of subordinates who report to a given manager. Span of control
is impacted upon by the following factors:
i. Degree of interaction between personnel or units being managed.
ii. Degree of dissimilarity of activities being supervised.
iii. Incidence of new problems in the supervisors units.
iv. Degree of physical dispersion of activities.
v. Extent to which supervisor must carry out non-managerial duties and the demands on
his time from other people and units.
As the incidence of these factors increase, the burden of supervision increase and number of
subordinates that can effectively be managed i.e. the span of control, diminishes.
Span of control is a key consideration in organisational design when attempting to maintain a
balance between the number of hierarchical levels and the span of control i.e. tallness vs
flatness of the organisational structure. As the organisation grows in size and/or complexity,
hierarchical levels are often added in order to keep span of control at manageable levels. Tall
hierarchical structures however add considerable disadvantages in the form of high overhead
costs and complicated communication and decision making mechanisms.
2.2.5 Line and staff
Classical theory recognises that situations often arise where a manager does not have the
specialist knowledge in order to accomplish the task at the desired standard. Staff roles exist
in organisations to support the manager with specialist knowledge when required. A staff role
may only give advice; the authority and responsibility for decisions remain with line.
8/6/2019 Management of Surface Mines
13/36
Chapter 2 Results of literature study
................................ ................................ ................................ ................................ ................................ . POY 7838
2.2.6 Unity principle
The unity principle refers to the clear reporting relationship from the bottom of the hierarchy
to the top. Ambiguity and the possibility of conflicting instructions from different managers
are avoided.
2.3 Coordination in an organisation
The formalised, operating practices in the organisation provide it with a framework for
controlling the work behaviour and work expectations of employees. Written rules and
regulations transmitted through an organisational design do not however ensure coordinated
effort and the accomplishment of organisational goals. In order to achieve coordination,
managers need to employ a number of additional methodologies.
Coordination is the set of mechanisms a manager uses to align the actions of organisational
subunits in order to achieve the desired outcomes. The extent of coordination required is
driven by the amount of information that needs to be processed during task accomplishment.
Uncertain and changing environments increase the amount of information to be processed and
therefore the amount of coordination that is required.
Information processing capacity, as facilitated by coordination, needs to be developed in both
the vertical and horizontal dimensions.
y An increase in vertical coordination results in a decrease in the number of exceptions
to be resolved by the organisational hierarchy.
y An increase in horizontal coordination results in improved integration of workflow.
2.3.1 Vertical coordination mechanisms
i. Groups -by increasing group decision-making through the use of task forces, or so-
called collateral organisations comprised of people from different subunits, to identify
and solve problems that span organisational levels and functions.
ii. Direct supervision chain of command is the traditional means of establishing vertical
coordination through the actions of supervisors and managers.
iii. Standardisation of work processes in certain environments by using technology
results in highly standardised work processes that dictate the pattern of coordination
with very little interference required.
8/6/2019 Management of Surface Mines
14/36
Chapter 2 Results of literature study
................................ ................................ ................................ ................................ ................................ . POY 7839
iv. Standardisation of outputs seeks to specify the nature of the output through the use of
physical and economic standards. The emphasis of coordination shifts from the how
work is done to the output standards to be conformed to.
v. Performance appraisals are used to communicate organisational goals and
expectations and in order to direct individual performance in this regard. If used
correctly the process can support goal alignment and coordination.
vi. Management Information Systems (MIS) facilitate vertical coordination by providing
accurate, consistent and relevant information across the organisation for use in
decision making at various levels.
2.3.2 Horizontal coordination mechanisms
i. Direct contact is the simplest and least costly form of horizontal coordination and
describes the conversations that take place between functions or process owners when
a situation calls for an increased level of coordination.
ii. Liaison roles are formally established to coordinate workflow between two of more
organisational subunits. As organisations grow in complexity the need for liaison
managers tend to increase.
iii. Horizontal task forces are usually temporary structures set up to provide horizontal
coordination in situations where problems occur involving numerous departments.
Members from the affected departments are drawn into a task force in order to deal in
a focussed manner with the issue.
iv. Permanent teams to manage reoccurring workflow problems are used when
organisations find that horizontal coordination problems persist.
2.4 Control in an organisation
Control is the set of mechanisms used to keep action and outcomes within predetermined
limits. Control deals with the setting of work standards, measuring results against plan and
initiating corrective action. Management control systems can focus on methods of work i.e.
process controls or on the control of results of work i.e. objective setting.
2.4.1 Process control
Process control refers to the standardisation of task performance and is achieved through the
specifying of work methods and setting work standards.
8/6/2019 Management of Surface Mines
15/36
Chapter 2 Results of literature study
................................ ................................ ................................ ................................ ................................ . POY 78310
2.4.2 Results oriented control
Results oriented control refers to a system that achieves control by specifying the results to be
obtained by employees and their work units. Management by Objectives (MBO) is a widely
used example of such a system. MBO systems attempt to ensure the setting of specific
measurable goals, the monitoring of progress against towards these goals and the receiving of
rewards based upon the outcomes.
REFERENCES
Child, J. 1987. Organization. 2nd
ed. Harper & Row Ltd, London.
Dailey, R. 1990. Organisational Behaviour. 2nd ed. Pitman Publishing, London.
Gouillart, F.J. & Kelly, J.N. 1995. Transforming the Organization. McGraw-Hill, Inc., NY
Hrebiniak, L.G. 1978. Complex Organizations, 1st ed. West Pub. Company, NY.
Pinchot, G. & E. 1994. The End of Bureaucracy & the Rise of the Intelligent Organisation. 1st
ed. Berret-Koehler Pub., San Francisco
Robey, D. 1982. Designing Organizations. 1st ed. Richard D. Irwin, Inc., Illinois.
Stone, J.D. 2008. The development of a comprehensive, practical and integrated management
method with specific reference to the South African mining industry. PhD thesis. University
of Pretoria.
Tomasko, R.M. 1993. Rethinking the Corporation. 1st ed. Amacom, NY
8/6/2019 Management of Surface Mines
16/36
THE MANAGEMENT OF S URFACE MINES
CHAPTER 3
RESULTS
Due to the nature of this assignment no field observations or measurements were conducted.
8/6/2019 Management of Surface Mines
17/36
Chapter 3 Results
................................ ................................ ................................ ................................ ................................ . POY 78312
3. RESULTS
Due to the nature of this assignment no field observations or measurements were conducted.
8/6/2019 Management of Surface Mines
18/36
THE MANAGEMENT OF S URFACE MINES
CHAPTER 4
ANALYSIS AND EVALUATION OF RESULTS
Chapter 4 discusses the application of organisational design and structure as well as how
communication and integration between core and support functions are achieved in a surface mining
operation.
8/6/2019 Management of Surface Mines
19/36
8/6/2019 Management of Surface Mines
20/36
Chapter 4 Analysis and evaluation of results
................................ ................................ ................................ ................................ ................................ . POY 78315
formal and informal links between employees and departments that ensure connectedness and
the alignment to a common purpose.
Figure 4.1 XXXXX Colliery organisational structure
4.2 Centralisation
Mining operations owned by large mining houses also tend to display a high degree of
centralisation, where the authority to make decisions are retained by top management. This
tendency is driven by mainly 2 factors:
y The requirements of the Mine Health and Safety Act together with the high degree of
regulation in place to ensure health and safety in the mining environment.
y The need of large organisations to maintain control and the attempt to reduce the
management effort required to manage a large number of disparate operations.
In centralised organisations employees follow uniform procedures and policies formulated
and enforced by higher management. Such an organisation also exhibit high levels of
formalisation with many written rules, regulations and procedures that guide employee
behaviour and decision making. Centralisation also tends to trigger standardisation where
variations in behaviour are limited through set work procedures and processes. In the surface
mining environment where the health and safety risk is high and where many of the controls
that mitigate identified risks are administrative i.e. rule based, in nature, centralisation
XXXXX
Colliery
Mining
Department
Drill & Blast
Section
Dragline
Section
Coaling
Section
Contractor Mini-
pit Section
Maintenance
Department
Track
Section
Tyre
Section
Instrumentation
Dragline
Section
HSE
Department
Health
Section
Safety
Section
Environmental
Section
Integrated
Planning
Department
Short Term
Planning Section
Geology
Section
Survey
Section
Control Room
Human
ResourcesFinance
8/6/2019 Management of Surface Mines
21/36
8/6/2019 Management of Surface Mines
22/36
C
! " t# $%
&
'
( ! l) 0 i0 ! (1
# 2 ! l3 ! ti4 ( 4 f$ # 0 3 lt0
................................................................................................................................................................. POY 78317
Fi 4.4.1 XXXXX Colli mi i val stream map
At a l5
65
l 2 process level 7 core functions can be furt8
er broken down into sub processes
such as topsoil stripping, burden stripping, burden drilling, blasting, etc. See fig. 4.4.1.
Although level 2 processes can be broken down into more detailed process steps atlevel 3 etc.
this is in the majorit9 of instances the lowest level to which work units will be sub divided
except forthe division into teams in orderto allow for 24/7 operations. For mining operations
with a large geographical span of control, each geographicall9 distinct area might have its
own similar structure. See fig. 4.4.2.
Functions that support the core functions are referred to as service or support functions and
include organisational functions such as Maintenance, Finance, Human Resources, Buying,
Stores, etc.
4.4. i i t t
The mining department is responsible for the total mining value chain including topsoil
stripping, soft burden stripping; burden drilling, burden blasting, burden stripping, coal
drilling, coal extraction and rehabilitation.
y Topsoil stripping the top layer of fertile soil is removed and stockpiled for use
during rehabilitation once the ore has been extracted. Itis idealto direct place topsoil
i.e. instead of stockpiling to place the topsoil in the position where rehabilitation is
already taking place and the soil can be used immediately.
Lvl
1Core: Expos
@re Core: Extraction
Lvl2
Topsoilstrip
Softburdenstrip
Burdendrill
Burdenblast
Burdenre A ove
Coaldrill
Coalblast
Coalextract
Mining service: Haulroad construction and maintenance
Mining service: Water management
Mining service: Geology
Mining service:Survey
Mining service: Control room
Lvl0 Core: Mining
8/6/2019 Management of Surface Mines
23/36
Chapter 4 Analysis and evaluation of results
................................ ................................ ................................ ................................ ................................ . POY 78318
Figure 4.4.2 Organisational structure driven by geographical and functional considerations
y Soft burden stripping depending on geology, a layer of soft non-fertile soil may be
present below the topsoil layer that requires removal before the hard burden is
reached.
y Burden drilling the rock layer above the coal seam is drilled with pre-split and infill
holes according to a drill pattern that depends on hole size, rock characteristics,
burden thickness, etc.
y Burden blasting the drilled holes is filled with explosives and pre-split and
production blasts are set of using pyrotechnics or electronic detonators to shatter the
rock burden to a sufficient fragmentation for the next process. Casting of a portion of
the burden into the void is a desirable secondary outcome of this process.
y Burden removal the blasted burden is removed in order to expose the coal seam.
Various methods or a combination of them can be used including production dozing,
dragline or truck and shovel.
y Coal drilling once the coal is exposed the coal is drilled according to a pattern
design that depends on hardness, thickness, etc.
y Coal blasting explosives are pumped into the drilled holes and the coal block is
blasted to create a fragmented coal seam.
SB
rfaceC
iD
iD
g
E F
eratioD
Ci
Di
Dg
Ge
Fart
He
Dt
I
rea 1
Prill
Q
Rlast
SectioD
Gragli
De
Sectio D
CoaliD
g
SectioS
Ti
Si
Sg
Pe
Uart
Ve
St
I
rea 2
Drill W X last
SectioD
DragliD
e
Sectio D
Coali D g
SectioS
Cai
Dte
Da
Dce
DeF
artH
eD
t
Track
Sectio S
Tyre
SectioD
ID
strB H
eD
tatioD
Sectio D
DragliD
e
SectioD
YSE
DeF
artH
eD
t
Yealth
Sectio S
Safety
SectioD
ED
viroD H
eD
tal
Sectio D
I S tegrated
PlaD D
iD
g
De F art H e D t
Short TerH
Pla S S i S g Sectio S
eology
SectioD
SB
rvey
Sectio D
CoS
trol RooV
8/6/2019 Management of Surface Mines
24/36
Chapter 4 Analysis and evaluation of results
................................ ................................ ................................ ................................ ................................ . POY 78319
y Coal extraction the fragmented coal seam is loaded onto haul trucks that transport
the coal to the run of mine (ROM) tip or to a ROM stockpile.
y Rehabilitation once all the seams have been mined out the resulting void is filled,
levelled according to contours set out in a rehabilitation plan, covered with a layer of
topsoil and seeded in order for natural vegetation to be re-established.
In addition to the activities that form part of the mining value stream there is a number of
mining support activities that need to take place in order to support these activities. Such
mining support services include water management, control room operations and haul road
construction and maintenance.
y Water management the management of water is of utmost importance in a surface
mining operation. Due to the nature of the operation i.e. the creation of a large hole
and the inescapable effect of gravity, water tends to accumulate in the area where
operations need to take place. Diverting water away and preventing it from entering
the pit is preferred, but is in even the best scenario only partially possible. Water in
the pit, accumulating at various low points needs to be pumped out and, due to the
fact that it is now affected water, needs to be managed by means of dams and usage in
order to prevent decanting into the environment. At XXXXX Colliery a dedicated
team is responsible for the laying of pipes and the positioning and operation of the
pumps used to clear the production areas of water.
y Haul road construction and maintenance ramps and haul roads are constructed as
part of the initial establishment of the mine. As the cut advances, ramps needs to
advance with the cut in order to maintain the optimal gradients and haul roads moved
as current routes become inefficient or mined through. The impact of rain and wear on
the haul road surface also takes its toll and is very dependent on the quality of the
initial construction. The placing of road signs, creation of roadside berms, etc. would
also fall into this category. The driver used to allocate responsibility for haul road
construction and maintenance can vary between the following:
i. most dependant user is the mining sub function most dependant on the quality
of the haul roads. In a surface mining operation this would most likely be the coal
extraction team. In this scenario the team responsible for the haul road also has
the most to gain from a quality outcome which results in a self-regulating system.
Sections not used by the responsible team might be neglected though.
ii. owner of equipment this principle allocates responsibility to the sub-function
that has operational control over the equipment used to execute the task. Control
8/6/2019 Management of Surface Mines
25/36
Chapter 4 Analysis and evaluation of results
................................ ................................ ................................ ................................ ................................ . POY 78320
over the factors of production is key to this method of allocation. The same
advantages and disadvantages as per the previous scenario is however prevalent.
iii. dedicated team the equipment and so-called pit services functions can also be
grouped into a mining support services team that support the core mining
processes through the provision of a variety of activities that may include haul
road construction and maintenance, water management, etc. This scenario
supports specialisation through departmentalisation and allows for increased
focus.
At XXXXX Colliery a combination of the above options are currently in place. Ramp
construction is the responsibility of the coaling section, water management is done by
a dedicated team also reporting into the Coaling function and haul road construction
and maintenance is part of the responsibilities of the contractor mini-pit
superintendent. Allocating haul road activities to the contractor mini-pit
superintendent is mainly a consequence of the balancing of span of control and does
not necessarily deliver the best outcome. Equipment allocation that is aligned to this
distribution of responsibilities is only partially in place and requires some inter
function coordination for activities to run smoothly.
y Control room operations this function can play a significant role in the overall
coordination of activities and the efficiency and effectiveness of operations. The
effectiveness of this function is multiplied if staff is competent and effective fleet
management and communication systems are in place. Functions of the control room
include, but is not limited to:
y The monitoring of and reaction to increased cycle times, waiting times and other
changes in conditions that may require a reallocation of resources.
y The coordination and monitoring of the response to breakdowns on critical equipment
in order to ensure rapid response in terms of repair and return to service.
y The communication and coordination of out of normal situations e.g. hazardous road
conditions, lightning alerts, evacuations for blasting, response to injury or other
emergency situations, etc.
y The recording of production and other data used for the generation of the reports that
support decision making across the organisation.
At XXXXX Colliery the control room is responsible for the activities as described. The
control room has a number of resources to their disposal including a fleet management
system, radio, telephone, email and SMS communications, weather and lightning warning
systems, camera surveillance, SCADA, SAP interface, etc.
8/6/2019 Management of Surface Mines
26/36
8/6/2019 Management of Surface Mines
27/36
Chapter 4 Analysis and evaluation of results
................................ ................................ ................................ ................................ ................................ . POY 78322
to the fact that XXXXX Colliery is geographically concentrated it has a functional structure
with sections looking after the dragline, track equipment, tyre equipment, instrumentation,
facilities and electrical reticulation.
4.4.4 Health, Safety and Environment Department (HSE)The HSE department is the custodian of systems that manage the health and safety of
employees and the protection of the environment. It is important to note that even though they
are custodians of the systems, line remains accountable for adherence to these systems.
y Health the monitoring of factors that may have an influence on the health of
employees and the subsequent recommendation of corrective measures should
excursions exceeding the Occupational Exposure Limits as set out in the Mine Health
and Safety Act be noted.
y Safety - the safety function monitors the implementation and adherence to safety rules
and standards, ensure that safety risk management is carried out as per the Mine
Health and Safety Act and report on safety statistics. A safety program that is
proactive in nature and that focus not only on conditions but also on behaviour is
managed and adherence by the organisation is tracked in order to ensure adequate
coverage of all employees and all high risk activities.
y Environment this function monitors adherence to environmental laws as well as to
the Environmental Impact Assessment (EIA) conditions under which the mine is
operating and include factors impacting on water, air, soil, vibration, etc.
4.5 Service departments
4.5.1 Human resources
The Human Resource Department is a support function that delivers a range of services to the
organisation focussed around its workforce.
y Recruitment when vacancies occur in the organisation it is the HR departments role
to facilitate the recruitment process the processes such as advertising, short listing,
assessing, interviewing, appointing and on-boarding. It is vital that the customer
function remain involved in the steps as listed in order to ensure that the right
individual for the vacancy is identified and recruited.
y Human Resource Development (HRD) to ensure a skilled workforce that will
support the organisation in achieving its objectives employees needs to be trained and
developed in the right development areas. HRD covers a wide spectrum of training
8/6/2019 Management of Surface Mines
28/36
Chapter 4 Analysis and evaluation of results
................................ ................................ ................................ ................................ ................................ . POY 78323
and development areas including skills, leadership, supervisory, health and safety, IT,
etc.
y Industrial Relations (IR) the IR function are the custodians of industrial relations
processes within an organisation. The main processes are the grievance process and
the disciplinary process. It is required from the IR function to remain impartial, to
maintain and update systems and procedures and to ensure that the process followed
in procedurally correct and fair.
y Remuneration the weekly and/or monthly payment of employee salaries is the
responsibility of the remuneration function. Payroll systems support the capturing of
hours worked etc. against which varying pay rates are applied for the calculation of
salary payouts.
4.5.2 Finance
y Management accounting the management accounting function is forward looking in
its approach and tracks and reports on the current performance of an organisation in
such a way that timely remedial action by managers is possible.
y Financial accounting the financial accounting function is responsible for drawing up
of financial statements, mainly used by persons external to the organisation, that
reflect the financial status of an organisation over set period of time e.g. a fiscal year.
4.5.3 Supply
y Procurement the need in the organisation for goods and/or services required as production or business inputs trigger a procurement response. The procurement
function manages the process of researching supply options for the good or service,
requesting and comparing prices and entering into a supply agreement for the good or
service.
y Stores organisations require goods such as spares and consumables at short notice,
usually much shorter that can be accommodated by the supply process although in
special cases such as Just In Time (JIT) systems this is achieved to a certain degree. A
buffer stock is held in a store to compensate for the lead time in delivery of goods
through the procurement process.
4.6 Communication and integration
In order for an organisation and in this case a surface mining operation to be successful, all
departments needs to be aligned to and work together in a coordinated manner towards the
organisational objectives. It is not sufficient for an organisation to have all the necessary
8/6/2019 Management of Surface Mines
29/36
Chapter 4 Analysis and evaluation of results
................................ ................................ ................................ ................................ ................................ . POY 78324
functions in place in an organisational structure. Communication and integration within core
and support functions and between functions are crucial in order to ensure that the quantity,
quality and timing of delivery is realised.
According to the Collins Dictionary communication is the imparting or exchange of
information, ideas or feelings and to integrate means to make or be made into a whole.
When discussing communication and integration in an organisation it is impossible to not also
mention control and coordination since the concepts are so closely linked and interdependent.
Methods of coordination and control that organisations deploy were briefly discussed under
sections 2.3 and 2.4 of this assignment. I will therefore now discuss methods deployed at
XXXXX Colliery to ensure good communication and achieve integration between functions.
y Life of Mine and 5-year plans these documents provide a single version of the
mining operations over the life of the mine and over the next 5 years respectively and
provide a common base from which planning, business improvement and other
processes can take place.
y 2 year budget the budget provides a more detailed representation of the mining
operation over the next 2 years and is based on the Life of Mine and 5 Year plans and
contains details of the expected volumes, qualities and costs. All decisions in the
organisation are to be measured against and aligned to the achievement of the budget.
y Business plans the XXXXX business plan is the outcome of a planning process
where the management team deliberated and made decisions on key performance
areas to be focussed on, initiatives to be implemented and projects to be executed in
order to achieve the budget. Once the mine business plan has been formulated,
departmental business plans that support the mine business plan are developed in
each functional area. KPIs that measure the progress and performance in the
identified focus areas are identified.
y Mission Directed Work teams (MDWs) XXXXX Colliery use a system of MDWs
to ensure goal alignment, encourage function interaction and facilitate employee
involvement. Level 1 to 4 MDW teams cover the vertical cross section of the
organisational structure from operator level to management level. KPIs identified as
critical to the success of the business and the achievement of the budget is cascaded
down the organisational hierarchy in such a way that the KPIs at each level is aligned
with the organisational goals whilst still being line of sight for the team in question.
Teams have meetings at relevant frequencies and focus on corrective actions in
performance areas where targets are not achieved. Monthly Multi Level Meetings
(MLMs) bring representatives from all teams in a function together for presentations
8/6/2019 Management of Surface Mines
30/36
Chapter 4 Analysis and evaluation of results
................................ ................................ ................................ ................................ ................................ . POY 78325
by each team on team KPI performance and innovations implemented. Teams need to
identify their customers and assess their satisfaction with the service provided by the
team. Corrective actions are required for issues identified through this process.
y Meetings a number of meetings that occur daily, weekly or monthly ensure cross
functional communication and integration. The following are a few examples:
i. Morning production meeting (daily) maintenance, mining and planning
functions meet to discuss safety, equipment and production performance over
past 24 hours and coordinate activities for next 24 hours.
ii. Morning maintenance meeting (daily) maintenance function meets to discuss
safety and equipment performance over past 24 hours and coordinate activities
for next 24 hours.
iii. Morning heads of department production meeting (daily) heads of department
meets to discuss safety and production performance over past 24 hours and
month to date and to coordinate activities for the week. Other relevant topics are
raised, discussed and decisions made.
iv. Planning meeting (weekly) mining, maintenance and planning functions meet
to review past performance and agree on production and maintenance schedule
for the following week.
y SIPOC The Supplier Input Process Output Customer (SIPOC) is a business
optimisation tool used on an ad hoc basis to improve workflow in an organisation. It
pays particular attention to the interfaces between processes, but also has a component
that focus on the process itself. The outcome of the exercise is a clear understanding
of the inputs required and the outputs that needs to be delivered and at what quality.
The outcome is usually captured in a series of Customer Service Level Agreements
(SLAs) that detail the expectations and commitments between parties. SLAs are a
requirement of the MDW system and are required for a team to move beyond a
certain maturity level.
y Standard Operating Procedures (SOPs) These documents describe the method in
which a task is to be done and supports the standardisation of tasks. The controls
selected to mitigate the health, safety and environmental risks inherent in a task
during the risk assessment process, would be detailed in this document. The use of
SOPs as the documented way of doing something supports integration between
functions.
y Process maps Both the activity of drawing up a process map as well as the process
map itself support integration and communication between functions. A process map
provides a clear understanding of the sequence of events to achieve a certain outcome
8/6/2019 Management of Surface Mines
31/36
Chapter 4 Analysis and evaluation of results
................................ ................................ ................................ ................................ ................................ . POY 78326
and clarifies responsibilities for each process step. Error proofing is built into well
designed process maps making the process self regulating and reduces the need for
management intervention and therefore has a positive effect on span of control.
y Work groups and steering committees Ad hoc work groups and steering committees
are created to address particular problems identified or to ensure coordination
between functions during the implementation of cross functional systems or
initiatives.
y Reports The distribution of a number of reports that provide information on
progress against targets or adherence to work standards further ensure goal alignment,
communication and integration of functions.
8/6/2019 Management of Surface Mines
32/36
THE MANAGEMENT OF S URFACE MINES
CHAPTER 5
CONCLUSIONS
Chapter 5 summarises conclusions to the objectives as set out in Chapter 1 based on the literaturestudy and review as documented in Chapters 2 and 4.
8/6/2019 Management of Surface Mines
33/36
Chapter 5 Conclusions
................................ ................................ ................................ ................................ ................................ . POY 78328
5. CONCLUSIONS
5.1 Conduct literature study
A literature study was undertaken into management systems, organisational design and
structure and the ways that organisations coordinate, communicate and integrate in order to
ensure alignment and the delivery on the organisational objectives.
Organisational design and structure determines how work is divided and the way that
coordination of activities takes place in an organisation.
Organisational designs differ depending on the design principle around which
departmentalisation has taken place for the specific organisation. There is no absolute superior
structure, only structures that suite a specific organisation better than others. The geographical
separation of business units, industry type, regulatory framework, etc. play a role in what
structure supports organisational objectives best.Irrespective of the structure of an organisation, communication and integration is required.
Some modern structures allow for the natural and informal flow of information whilst other,
more traditional structures require formal systems in order to ensure that communication and
integration occur.
5.2 Review management structure of a surface mining operation
The management structure of a surface mining operation is generally functional and
hierarchical in nature. Departments are set up along lines of functional responsibility withteams responsible for areas where they have specific expertise. Hierarchical levels of
management within departments allocate and control resources and intervene when issues occur
in processes that deviate from the norm.
Surface mining operations have a high degree of centralisation with most decisions being made
at senior management levels in the organisation.
5.3 Review role of support departments
Service departments in surface mining operations are also functional and hierarchical in nature.Service departments, with specialist knowledge in a specific field, carry out activities that
enable departments that are responsible for the mining value stream to be more effective.
8/6/2019 Management of Surface Mines
34/36
Chapter 5 Conclusions
................................ ................................ ................................ ................................ ................................ . POY 78329
5.4 Review methods used to communicate and integrate between
departments
It is crucial for the activities of various core and support departments to be aligned towards the
achievement of the goals of the organisation. Organisational alignment is achieved through the
communication of the organisational objectives throughout the organisation both vertically and
horizontally. Delivery of these objectives requires the selection and integration of all
departmental activities in support of the organisational objectives.
Employees and departments in a surface mining operation use a large number of mechanisms to
ensure communication and integration. These mechanisms range from formal systems such as
planning and budgeting processes to ad hoc type processes such as work groups.
8/6/2019 Management of Surface Mines
35/36
THE MANAGEMENT OF S URFACE MINES
CHAPTER 6
RECOMMENDATIONS
Chapter 6 contains recommendations to be considered in order to improve the functioning of the
surface mining operation.
8/6/2019 Management of Surface Mines
36/36
Chapter 6 - Recommendations
6. RECOMMENDATIONS
6.1. Lower level of decision making
Surface mining operations should through a process of training and coaching work towards driving
the level of decision making to lower levels in the organisation. Supervisory staff should beempowered to make the decisions required to ensure operational effectiveness and should be held
accountable for such decisions. Managers should refrain from becoming operationally involved at
levels where disempowerment of the supervisory level takes place.
6.2 Ensure alignment to organisational objectives
Engage in a sequential and systematic process of setting and cascading of organisational objectives in
a top down manner throughout the organisation. The management team should at the right time during
the business cycle engage in a systematic process to determine the critical success factors and critical
activities that will be required going forward in order to achieve the organisations goals. Once this
have been agreed upon, functional departments should engage in similar processes to decide upon
critical success factors and activities on a departmental level.
6.3 SLAs with service departments
Departments central to delivering on the value stream should, through the use of a SIPOC process,
indentify the inputs required from service departments and contract with them on the quality and
quantity of such inputs by indentifying KPIs. The outcome of such an exercise should be captured in a
Service Level Agreement and performance on KPIs should be reviewed on an appropriate frequency
to ensure compliance. The use of MDW can be central to such a process.
6.4 Use cross functional teams
Deviate from pure functional structures and experiment with cross functional teams in certain areas of
the business. Form teams that consist of both operational and maintenance employees that report into
a production supervisor or manager responsible for a certain operational activity e.g. burden drilling.
This structure encourages the alignment of objectives and may lead to improved production
performance.