Date post: | 08-Apr-2018 |
Category: |
Documents |
Upload: | anonymous-uohuag |
View: | 225 times |
Download: | 0 times |
of 19
8/7/2019 Mandeep Singh MAE[577] Project 01
1/19
[Project 01:
CAEPackages
Survey ]
[7 September]
[2010]
[Product Design in aCADEnvironment]
8/7/2019 Mandeep Singh MAE[577] Project 01
2/19
2 | P a g e
Contents1 Introduction .......................................................................................................................................... 3
2 Problem definition / Problem statement.............................................................................................. 3
3 Result .................................................................................................................................................... 4
3.1 Assignment Part 1 CAE Packages Survey ................................................................................... 4
3.1.1 Pro/ENGINEER [1] .................................................................................................................... 4
3.1.2 CATIA[4] .................................................................................................................................. 6
3.1.3 Solid Works (SW) [7] .............................................................................................................. 11
3.1.4 Unigraphics NX7 [10] .............................................................................................................. 13
3.1.5 Abaqus FEA (formerly ABAQUS) [11] .................................................................................... 14
3.1.6 ANSYS[12] .............................................................................................................................. 15
3.2 Part B - Create a Google Sites as your MAE477/577 Web Design Portfolio ............................... 16
4 Discussion ............................................................................................................................................ 16
5 Conclusion ........................................................................................................................................... 17
6 References (Websites) ........................................................................................................................ 19
8/7/2019 Mandeep Singh MAE[577] Project 01
3/19
3 | P a g e
1 IntroductionThis Project deals with the survey of the various CAE packages available in the Laboratory Furnas 1019. Our company deals with the Electromechanical systems that works on the areaslike product development using CAD, FEA, Functional Simulation of Machines and Mechanism,Heat Transfer and Fluid Flow. We will discuss about the various CAE packages available in themarket which matches the requirements of our company. First we will introduce each of thepackages and their specialty in their field. Since our company is an engineering company thatinvolves in the design of all kind of electromechanical systems we require a package withbroader arena where a package serves as a multi module comparing with the cost of thepackage.
There are many CAE packages available in the market, we will focus our report to the some
popular packages only to those packages that are pioneer in our field of interest and installed inthe laboratory.
The following packages are studied :
1. CATIA
2. Pro/ENGINEER
3. NX
4. SolidWorks
5. ANSYS
6. Abaqus
2 Problem definition / Problem statement Part 1 of the assignment involves survey of the CAE packages available in the laboratory Furnas 1019. The assignment should enable us to judge which package is required as to execute
our projects efficiently and meets the requirement for our company. This assignment also asksto recommend the package group of CAE package to use in the company for next 5 years. Part 2asks to develop a web-site using google sites tool.
8/7/2019 Mandeep Singh MAE[577] Project 01
4/19
4 | P a g e
3 Result In Part 1 of the assignment I have studied all the features of the package and their usefulness inour company s profile. All the packages are studied using their respective web-pages. For part 2Web Design Portfolio has been generated using Google sites.
3.1 Assignment Part 1
CAE Packages SurveyIn this section we will discuss the various modules and features available in CAE packages underconcern.
3.1.1 Pro/ENGINEER [1]
Pro/ENGINEER, PTC's parametric,
integrated 3D CAD/CAM/CAE solution, is
used by discrete manufacturers
for mechanical engineering, design andmanufacturing. Created by Dr. Samuel P.
Geisberg in the mid-1980s [1], this is one of
the most powerful CAD/CAM/CAE packages
available in the market. It was developed by
Parametric Technology
Corporation (PTC).This was one of the first
CAE package which revolutionized the
industry by the parametric or variational
feature-based, associative solid modeling.
This package works Windows and SUN
Solaris Operating system platform[1].
It has inbuilt capabilities of design
optimization techniques which helps the
engineers in the preliminary product design
hence reduces the overall design cycle of the product. One can also integrate Finite Element
Solvers like Ansys and Nastran with Pro/ENGINEER Mechanica Wildfire 5.0 for use in FEM
mode[1]. By providing a scalable platform and incorporating features like tolerance analysis and
simulation, Pro/ENGINEER can drastically enhance the manufacturing capabilities. These
features are really useful in CNC and Tooling Design & manufacturing sectors [2] .
Pro/ENGINEER[2] (Table extracted from Wikipedia.com)
Developer(s) PTC
Initial release 1987
Stable release Pro/ENGINEER Wildfire 5.0 /
September 16, 2009; 10 months
ago [1]
Operating system Windows, Unix
Type CAD software
License Proprietary
Website ptc.com/products/proengineer
http://en.wikipedia.org/wiki/Parametric_Technology_Corporationhttp://en.wikipedia.org/wiki/Mechanical_engineeringhttp://en.wikipedia.org/wiki/Parametric_Technology_Corporationhttp://en.wikipedia.org/wiki/Parametric_Technology_Corporationhttp://en.wikipedia.org/wiki/Parametric_feature_based_modelerhttp://en.wikipedia.org/wiki/Parametric_feature_based_modelerhttp://en.wikipedia.org/wiki/Solid_modelinghttp://en.wikipedia.org/wiki/Software_developerhttp://en.wikipedia.org/wiki/Software_developerhttp://en.wikipedia.org/wiki/Parametric_Technology_Corporationhttp://en.wikipedia.org/wiki/Parametric_Technology_Corporationhttp://en.wikipedia.org/wiki/Software_release_life_cyclehttp://en.wikipedia.org/wiki/Software_release_life_cyclehttp://en.wikipedia.org/wiki/Pro_E#cite_note-0http://en.wikipedia.org/wiki/Pro_E#cite_note-0http://en.wikipedia.org/wiki/Operating_systemhttp://en.wikipedia.org/wiki/Operating_systemhttp://en.wikipedia.org/wiki/Microsoft_Windowshttp://en.wikipedia.org/wiki/Unixhttp://en.wikipedia.org/wiki/List_of_software_categorieshttp://en.wikipedia.org/wiki/List_of_software_categorieshttp://en.wikipedia.org/wiki/CADhttp://en.wikipedia.org/wiki/Software_licensehttp://en.wikipedia.org/wiki/Software_licensehttp://en.wikipedia.org/wiki/Websitehttp://en.wikipedia.org/wiki/Websitehttp://ptc.com/products/proengineer/http://ptc.com/products/proengineer/http://ptc.com/products/proengineer/http://en.wikipedia.org/wiki/Websitehttp://en.wikipedia.org/wiki/Software_licensehttp://en.wikipedia.org/wiki/CADhttp://en.wikipedia.org/wiki/List_of_software_categorieshttp://en.wikipedia.org/wiki/Unixhttp://en.wikipedia.org/wiki/Microsoft_Windowshttp://en.wikipedia.org/wiki/Operating_systemhttp://en.wikipedia.org/wiki/Pro_E#cite_note-0http://en.wikipedia.org/wiki/Software_release_life_cyclehttp://en.wikipedia.org/wiki/Parametric_Technology_Corporationhttp://en.wikipedia.org/wiki/Software_developerhttp://en.wikipedia.org/wiki/Solid_modelinghttp://en.wikipedia.org/wiki/Parametric_feature_based_modelerhttp://en.wikipedia.org/wiki/Parametric_feature_based_modelerhttp://en.wikipedia.org/wiki/Parametric_Technology_Corporationhttp://en.wikipedia.org/wiki/Parametric_Technology_Corporationhttp://en.wikipedia.org/wiki/Mechanical_engineeringhttp://en.wikipedia.org/wiki/Parametric_Technology_Corporation8/7/2019 Mandeep Singh MAE[577] Project 01
5/19
5 | P a g e
Pro/ENGINEER Mechanica(advanced) helps in examining a product loadings under loadings like
thermal and structural hence completes the mechanical design software analysis. At the same
time Pro/ENGINEER Tolerance Analysis Extension (TAX) which is reinforced by CETOL
Technology which can be used to study the affect of tolerance accumulation after assembly and
hence evaluate dimensional impact on the product beforehand. This feature can be a boon for
the reverse-engineering area. These capabilities really shorten the product development stage.
Pro/ENGINEER Mechanism Dynamics Option (MDO) gives us the flexibility to analyze the
motion and behavior of the system in dynamic conditions. This module of Pro/Engineer reduces
the cost of manufacturing a prototype. The simulated system can be analyzed through intuitive
graphs. The BMX (Behavioral Modeling Extension ) tool helps to understand the influence of
various parameters in the design and helps to optimize the system by evaluating the impact of
changes on these metrics. Pro/ENGINEER Manikin Analysis Extension helps in studying the
ergonomics of the human interaction with machines and helps in designing the workplace by
considering the human factors and their movements. It helps to study the macro and microlevel motion study which helps to reduce the unnecessary steps by optimizing the operations
hence generating an efficient and safe workplace for mankind. Another module is the
Pro/ENGINEER Fatigue Advisor. This helps to analyze the system under fatigue and helps in
deciding the warranty costs and field failure and life of a product. Pro/E has complex tools and
is generally recommended when an assembly has very high number of parts.
8/7/2019 Mandeep Singh MAE[577] Project 01
6/19
6 | P a g e
3.1.2 CATIA [4]
CATIA (Computer Aided Three-dimensional
Interactive Application) is also an highend CAD/CAM/CAE commercial software
equally competent with Pro/E which i s
developed by the French company Dassault
Systemes. It is marketed worldwide by IBM[3] .
CATIA is developed using the platform of
the C++ programming language, which now is
one of the key package of the Dassault
Systemes PLM software suite. It is widely used
by the Aerospace and Automobile
enterprises. CATIA offers through a
multidisciplinary approach a full spectrum of
design capabilities and enables efficient
collaboration through the design community
to encourage innovation across the extended
enterprise [4].
The Latest CATIA version is V6R2011.This package combines the dynamics behavior of the
structure and will be used with PLM 2.0 platform. With the combination of V6 with PLM, CATIAbecomes one of best tool in project management since it enables brainstorming in 3D outsidethe engineering department.It has a very large number of specific modules to the desired system to be analyzed. Thefollowing CATIA feature has been taken from CATIA website - http://www.3ds.com/products/catia/
CATIA[3] (Table extracted from Wikipedia.com)
Developer(s) Dassault Systemes
Initial release 1987
Stable release V6R2011
Operating system Windows, Unix
Type CAD software
License Proprietary
Website http://www.3ds.com/products/catia/
http://en.wikipedia.org/wiki/Computer-aided_designhttp://en.wikipedia.org/wiki/Computer-aided_manufacturinghttp://en.wikipedia.org/wiki/Computer-aided_engineeringhttp://en.wikipedia.org/wiki/Softwarehttp://en.wikipedia.org/wiki/Softwarehttp://en.wikipedia.org/wiki/Dassault_Systemeshttp://en.wikipedia.org/wiki/Dassault_Systemeshttp://en.wikipedia.org/wiki/IBMhttp://en.wikipedia.org/wiki/IBMhttp://en.wikipedia.org/wiki/C%2B%2Bhttp://en.wikipedia.org/wiki/Programming_languagehttp://en.wikipedia.org/wiki/Product_lifecycle_managementhttp://www.3ds.com/products/catia/http://www.3ds.com/products/catia/http://www.3ds.com/products/catia/http://en.wikipedia.org/wiki/Software_developerhttp://en.wikipedia.org/wiki/Software_developerhttp://en.wikipedia.org/wiki/Software_release_life_cyclehttp://en.wikipedia.org/wiki/Software_release_life_cyclehttp://en.wikipedia.org/wiki/Operating_systemhttp://en.wikipedia.org/wiki/Operating_systemhttp://en.wikipedia.org/wiki/Microsoft_Windowshttp://en.wikipedia.org/wiki/Unixhttp://en.wikipedia.org/wiki/List_of_software_categorieshttp://en.wikipedia.org/wiki/List_of_software_categorieshttp://en.wikipedia.org/wiki/CADhttp://en.wikipedia.org/wiki/Software_licensehttp://en.wikipedia.org/wiki/Software_licensehttp://en.wikipedia.org/wiki/Websitehttp://en.wikipedia.org/wiki/Websitehttp://www.3ds.com/products/catia/http://www.3ds.com/products/catia/http://www.3ds.com/products/catia/http://en.wikipedia.org/wiki/Websitehttp://en.wikipedia.org/wiki/Software_licensehttp://en.wikipedia.org/wiki/CADhttp://en.wikipedia.org/wiki/List_of_software_categorieshttp://en.wikipedia.org/wiki/Unixhttp://en.wikipedia.org/wiki/Microsoft_Windowshttp://en.wikipedia.org/wiki/Operating_systemhttp://en.wikipedia.org/wiki/Software_release_life_cyclehttp://en.wikipedia.org/wiki/Software_developerhttp://www.3ds.com/products/catia/http://en.wikipedia.org/wiki/Product_lifecycle_managementhttp://en.wikipedia.org/wiki/Programming_languagehttp://en.wikipedia.org/wiki/C%2B%2Bhttp://en.wikipedia.org/wiki/IBMhttp://en.wikipedia.org/wiki/Dassault_Systemeshttp://en.wikipedia.org/wiki/Dassault_Systemeshttp://en.wikipedia.org/wiki/Softwarehttp://en.wikipedia.org/wiki/Softwarehttp://en.wikipedia.org/wiki/Computer-aided_engineeringhttp://en.wikipedia.org/wiki/Computer-aided_manufacturinghttp://en.wikipedia.org/wiki/Computer-aided_design8/7/2019 Mandeep Singh MAE[577] Project 01
7/19
7 | P a g e
3.1.2.1 CATIA Systems uses the PLM structure for uniquely capturing and managing the productlifecycle. This also helps in tracing the life cycle of the product ensuring its accuracyduring the manufacturing of the product. It also helps for better quality control interms of design and execution. MODELICA language enables designer to create newlibraries and to re-use his components in later designs. CATIA Systems C Code
Generator helps the user to create a C based logic to have customized output fromCPU[4].The following products are available in CATIA System :
3.1.2.1.1 Dynamic behavior
a. Systems Dynamic Behavior : This approach gathers views from Requirements (R),functional (F), Logical (L) and Physical Design(P) hence calling the system designas RFLP
3.1.2.1.2 System engineering
a. CATIA Systems Architecture Design
b. System control and logic Modeling
c. System logic code generator
3.1.2.1.3 System Libraries
a. Dynamic system libraries
3.1.2.2 CATIA Shape provides industrial designers with strong tool to innovate shape and helpsin streamlining the contours as per needs. It loads engineers with a full suite of surfacing, reverse engineering, and modifying and validate any complex innovativeshapes . Even the composite structure modeling and analysis is possible in thisenvironment.Available Products available in this module are :
3.1.2.2.1 Aesthetical Shape: Under this feature we have distillers which provide optimizedshape and enables us to optimize the product by using virtual reality , rendering andsimulation.
3.1.2.2.2 Conceptual Shape
a. Imagine and Shape
b. Industrial Design
http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/systems/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/systems/p/systems-dynamic-behavior/?cHash=af86ef7034b3d86b435c6f5b9aa98971http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/systems/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/systems/p/systems-architecture-design/?cHash=daace24c12c29f1338e150e8ca8608c4http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/p/industrial-design/?cHash=eb7b32a324ffdd8b1c649fa96471d0d6http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/p/industrial-design/?cHash=eb7b32a324ffdd8b1c649fa96471d0d6http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/systems/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/systems/p/systems-architecture-design/?cHash=daace24c12c29f1338e150e8ca8608c4http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/systems/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/systems/p/systems-dynamic-behavior/?cHash=af86ef7034b3d86b435c6f5b9aa989718/7/2019 Mandeep Singh MAE[577] Project 01
8/19
8 | P a g e
c. Rendering
3.1.2.2.3 Mechanical surfaces
a. Body in White Modeling
b. Generative Shape Optimizer
c. Mechanical Surface Design
d. Realistic Shape Optimizer
e. Reverse Engineering
3.1.2.3 CATIA Mechanical enable the engineer to model any 3D parts and assembly varyingfrom the simplest to the most advanced. PLM integration helps in making the design
process more flawless and efficient. The available products under this module are:
http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/p/rendering/?cHash=9b3f676ea25b5308f02bfed25dc5b9a2http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/p/generative-shape-optimizer/?cHash=19f8430eae777b0bda85b65cd0622237http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/p/mechanical-surface-design/?cHash=cb1a4ac9768ae999850b3545e9e6abb7http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/p/realistic-shape-optimizer/?cHash=e0a1bc81c27b73945879da58618b9f91http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/p/reverse-engineering/?cHash=af74dfbb6f2ad528b31656a3832f3aaehttp://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/p/reverse-engineering/?cHash=af74dfbb6f2ad528b31656a3832f3aaehttp://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/p/realistic-shape-optimizer/?cHash=e0a1bc81c27b73945879da58618b9f91http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/p/mechanical-surface-design/?cHash=cb1a4ac9768ae999850b3545e9e6abb7http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/p/generative-shape-optimizer/?cHash=19f8430eae777b0bda85b65cd0622237http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/shape/p/rendering/?cHash=9b3f676ea25b5308f02bfed25dc5b9a28/7/2019 Mandeep Singh MAE[577] Project 01
9/19
9 | P a g e
3.1.2.3.1 3D Master
a. 3D Tolerancing and Annotation
b. Drafting and Annotation
3.1.2.3.2 Composite
a. Composites Engineering
b. Composites Manufacturing Preparation
3.1.2.3.3 Fastener & Tooling
a. Body in White Fastening
b. Jigs and Tooling Design
3.1.2.3.4 Mechanic
a. 3D Design
b. Aerospace Sheetmetal Pack
c. Cast and Forged Part design
d. Fabricated Part Design
e. Mechanical Design
f. Mechanism Simulation
g. Plastic Part Design
h. Systems Conceptual Mechanical Design
3.1.2.3.5 Structure
a. Structure Functional Design
http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/drafting-and-annotation/?cHash=c71ad1c1eebfcb4c0caf002e33b2f5cbhttp://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/composites-engineering/?cHash=74a52b42a3d1f3b69cffaae871c6587fhttp://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/composites-manufacturing-preparation/?cHash=f989370f2a2fd7d689fd7b821bfabba2http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/jigs-and-tooling-design/?cHash=b5a4a7fa0127f3bbcd521517316b4401http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/aerospace-sheetmetal-pack/?cHash=b18d362c799edc2d298d4fbb362dbca1http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/cast-and-forged-part-design/?cHash=291372d8e8b38d0eadad4b02ac86fab4http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/fabricated-part-design/?cHash=058986d471f1541949f9f22903675745http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/mechanical-design/?cHash=dce17a270f841490dc44aabda6db6ff8http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/mechanism-simulation/?cHash=f94e7c7cf7be1640dafd214238790c5ehttp://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/plastic-part-design/?cHash=a532afd6d709b1950d6bc07e61d84208http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/systems-conceptual-mechanical-design/?cHash=41f58f7b13c34ba243e178d141efb179http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/systems-conceptual-mechanical-design/?cHash=41f58f7b13c34ba243e178d141efb179http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/plastic-part-design/?cHash=a532afd6d709b1950d6bc07e61d84208http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/mechanism-simulation/?cHash=f94e7c7cf7be1640dafd214238790c5ehttp://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/mechanical-design/?cHash=dce17a270f841490dc44aabda6db6ff8http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/fabricated-part-design/?cHash=058986d471f1541949f9f22903675745http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/cast-and-forged-part-design/?cHash=291372d8e8b38d0eadad4b02ac86fab4http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/aerospace-sheetmetal-pack/?cHash=b18d362c799edc2d298d4fbb362dbca1http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/jigs-and-tooling-design/?cHash=b5a4a7fa0127f3bbcd521517316b4401http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/composites-manufacturing-preparation/?cHash=f989370f2a2fd7d689fd7b821bfabba2http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/composites-engineering/?cHash=74a52b42a3d1f3b69cffaae871c6587fhttp://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/mechanical/p/drafting-and-annotation/?cHash=c71ad1c1eebfcb4c0caf002e33b2f5cb8/7/2019 Mandeep Singh MAE[577] Project 01
10/19
10 | P a g e
3.1.2.4 CATIA Equipment provides an combines the electronic, electrical and fluid systems.Rules and standards are followed automatically during the design process to maintaincompliance to the code with product specification. Again integration of this modulewith PLM provides full traceability and configuration management providing qualityassurance and other documentation for manufacturing. Such an integrated
environment improves design quality, drastically reduces time needed formodifications, and minimizes errors. The available products in this environment are:
3.1.2.4.1 Electrical Systems
a. 3D Wire Harness Design
b. Electro-Mechanical Circuit Board
c. Systems Logical Electrical Design
d. Wire Harness Documentation and Formboard
3.1.2.4.2 Fluidic Systems
a. Generative Piping & Tubing
b. Piping and Tubing Design
3.1.2.4.3 Preliminary Layout
a. Systems Logical 3D Architecture
Knowledge, advance FEM and structural analysis features in CATIA completes it as a single andcomplete CAE package. The 3D Reuse , Prototyping , knowledge advisor and expert, Optimizermakes it a more versatile tool for the use in large organizations.
http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/p/3d-wire-harness-design/?cHash=9b271916a442cab426c0e4f441169801http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/p/electro-mechanical-circuit-board/?cHash=603195d69e20adee3c2931d63649d1a1http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/p/systems-logical-electrical-design/?cHash=ef48165b94aef6a5df6dd2cd280f41ebhttp://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/p/wire-harness-documentation-and-formboard/?cHash=ce93fe0a56ef305fb5175eb39fca0fc7http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/p/piping-and-tubing-design/?cHash=13368a9dc8d996e2fa829cd642db0225http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/p/piping-and-tubing-design/?cHash=13368a9dc8d996e2fa829cd642db0225http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/p/wire-harness-documentation-and-formboard/?cHash=ce93fe0a56ef305fb5175eb39fca0fc7http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/p/systems-logical-electrical-design/?cHash=ef48165b94aef6a5df6dd2cd280f41ebhttp://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/p/electro-mechanical-circuit-board/?cHash=603195d69e20adee3c2931d63649d1a1http://www.3ds.com/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/products/catia/portfolio/catia-v6/v6-portfolio/d/virtual-design/s/equipment/p/3d-wire-harness-design/?cHash=9b271916a442cab426c0e4f4411698018/7/2019 Mandeep Singh MAE[577] Project 01
11/19
11 | P a g e
3.1.3 Solid Works (SW) [7] Solid works is a 3D package extensivelyused in the medium and small scaleindustries. It is generally popular formodeling but now as its newer versionsare launching, large number of analysismodules are being added to it.Animation and lifelike image is one of the best feature. Defeature tool help incommunication with the client or othersin which one can hide their proprietarydetail.
Enhanced beam analysis tool helps inanalysis of parts rather than wholeassembly to simulate real worldconditions. Other good feature is theHVAC and cooling module in which onecan simulate the air and heat transfer without leaving the SW environment.
SW automatically assign weld number to the weldments hence reduces chances of forgetting toassign weld reference number in a welded structure. This helps in easy management and inestimation of welding consumables quantity.
3DVIA Composer Interactive Storyboarding helps to reduce communication time and train theemployee by providing previous and next step of design on the same screen. Its PDMintegration helps to manage the parts and helps in efficient procurement and quality assurance.Through PDM, all other departments like marketing , welding, estimation, fabrication, QualityAssurance get to know the product requirement and hence helps in reducing the productmanufacturing cycle.
SolidWorks (Table extracted from Wikipedia.com)
Developer(s) Dassault Systmes SolidWorks
Corp.
Stable release SolidWorks 2011[7]
Operating system Microsoft Windows
Type 3D computer graphics
License Proprietary
Website www.SolidWorks.com
http://en.wikipedia.org/wiki/Software_developerhttp://en.wikipedia.org/wiki/Software_developerhttp://en.wikipedia.org/w/index.php?title=Dassault_Systemes_SolidWorks_Corporation&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=Dassault_Systemes_SolidWorks_Corporation&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=Dassault_Systemes_SolidWorks_Corporation&action=edit&redlink=1http://en.wikipedia.org/wiki/Software_release_life_cyclehttp://en.wikipedia.org/wiki/Software_release_life_cyclehttp://en.wikipedia.org/wiki/Operating_systemhttp://en.wikipedia.org/wiki/Operating_systemhttp://en.wikipedia.org/wiki/Microsoft_Windowshttp://en.wikipedia.org/wiki/Microsoft_Windowshttp://en.wikipedia.org/wiki/List_of_software_categorieshttp://en.wikipedia.org/wiki/List_of_software_categorieshttp://en.wikipedia.org/wiki/3D_computer_graphicshttp://en.wikipedia.org/wiki/3D_computer_graphicshttp://en.wikipedia.org/wiki/Software_licensehttp://en.wikipedia.org/wiki/Software_licensehttp://en.wikipedia.org/wiki/Websitehttp://en.wikipedia.org/wiki/Websitehttp://www.solidworks.com/http://www.solidworks.com/http://www.solidworks.com/http://en.wikipedia.org/wiki/Websitehttp://en.wikipedia.org/wiki/Software_licensehttp://en.wikipedia.org/wiki/3D_computer_graphicshttp://en.wikipedia.org/wiki/List_of_software_categorieshttp://en.wikipedia.org/wiki/Microsoft_Windowshttp://en.wikipedia.org/wiki/Operating_systemhttp://en.wikipedia.org/wiki/Software_release_life_cyclehttp://en.wikipedia.org/w/index.php?title=Dassault_Systemes_SolidWorks_Corporation&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=Dassault_Systemes_SolidWorks_Corporation&action=edit&redlink=1http://en.wikipedia.org/wiki/Software_developer8/7/2019 Mandeep Singh MAE[577] Project 01
12/19
12 | P a g e
A recent quotation (for a single user) as on 7 th Sept 2010 which I have is obtained through e-mailshows the various costs of SolidWorks tools
Design License Subscription 1 SolidWorks Premium $7995 $1995
1 SolidWorks Professional
$5490 $14951 SolidWorks Standard $3995 $1295Design Validation1 SolidWorks Simulation Premium $10995 $35751 SolidWorks Simulation Professional $6995 $22751 SolidWorks Flow Simulation $13995 $3919Data Management1 SolidWorks Enterprise PDM CAD Editor $1795 $4951 SolidWorks Enterprise PDM Contributor $1295 $3951 SolidWorks Enterprise PDM Viewer $2995 $995Publishing1 3DVIA Composer $6800 $1700Sustainable Design1 SolidWorks Sustainability $2995 $995Total Price (USD$) $65345 $19134
SW also uses the parametric modeling feature hence competes with the Pro/E , Solid Edge andInventor. Still Pro/E is preferred if the assembly is too large. SW also have the feature of Re-useand tolerance stack-up analysis like Pro/E. CATIA is also the product of same company as solidworks. One major difference is that it works on PDM platform whereas CATIA is far ahead andworks on PLM platform. At the same time, Pro/E uses Windchill as an ERP(PLM) for datamanagement. SW differs from CATIA with the sophistication of work involved like non-linearfinite element analysis, acoustic simulation, noise and vibration analysis, fatigue and unsteadyheat transfer analysis. In comparison to high end softwares like CATIA or Pro/E, Solid Works hasfewer functions and makes them easy to use.
http://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/product-documentation-software.htmhttp://www.solidworks.com/sw/products/product-documentation-software.htmhttp://www.solidworks.com/sw/products/SolidWorks%20Sustainability.htmhttp://www.solidworks.com/sw/products/SolidWorks%20Sustainability.htmhttp://www.solidworks.com/sw/products/SolidWorks%20Sustainability.htmhttp://www.solidworks.com/sw/products/product-documentation-software.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htmhttp://www.solidworks.com/sw/products/mechanical-design-software-matrix.htm8/7/2019 Mandeep Singh MAE[577] Project 01
13/19
13 | P a g e
3.1.4 Unigraphics NX7 [10] This is also one of the thriving CAEpackage under the shadow of PLM. Italso concentrates in the field of Aerospace and Electromechanicalsystems. Product capabilities (takenfrom NX website given in references)include:
1. Industrial design & styling2. Package Design3. Mechanical Design
4. Electromechanical SystemsDesign5. Mechanical Simulation6. Electromechanical Simulation7. Tooling & Fixture Design8. Machining9. Engineering Process
Management10. Inspection ProgrammingWith more or less similar moduleslike Pro/E and CATIA, this package isgaining the market day by day. Theconsumers of the CAE package wasowned by Siemens i.e.,I-DEAS(Integrated Design and Engineering
Analysis Software) is now migrated in the NX so as to integrate with PLM tool.
NX (Unigraphics) (Table extracted from Wikipedia.com)
Developer(s) Siemens PLM Software
Initial release 1973
Stable release NX 7.5 / May 20, 2010; 3 months
ago
Development status active
Operating system Windows XP or later
(x86/x64), Unix-like
Available in multi-language
Type CAD / CAM / CAE / PLM
License proprietary
Website
http://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/package_design.html,/en_us/products/nx/design/package/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/mechanical_design.html,/en_us/products/nx/design/mechanical/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/electromechanical_systems_design.html,/en_us/products/nx/design/electromechanical/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/electromechanical_systems_design.html,/en_us/products/nx/design/electromechanical/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/mechanical_simulation.html,/en_us/products/nx/simulation/mechanical_simulation/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/electromechanical_simulation.html,/en_us/products/nx/simulation/electromechanical_simulation/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/tooling_fixture_design.html,/en_us/products/nx/machining/tool_fixture/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/machining.html,/en_us/products/nx/machining/machining/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/engineering_process_management.html,/en_us/products/nx/mde/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/engineering_process_management.html,/en_us/products/nx/mde/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/inspection-programming.html,/en_us/products/nx/machining/inspection-programming/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/inspection-programming.html,/en_us/products/nx/machining/inspection-programming/index.shtmlhttp://en.wikipedia.org/wiki/Software_developerhttp://en.wikipedia.org/wiki/Software_developerhttp://en.wikipedia.org/wiki/Siemens_PLM_Softwarehttp://en.wikipedia.org/wiki/Siemens_PLM_Softwarehttp://en.wikipedia.org/wiki/Software_release_life_cyclehttp://en.wikipedia.org/wiki/Software_release_life_cyclehttp://en.wikipedia.org/wiki/Operating_systemhttp://en.wikipedia.org/wiki/Operating_systemhttp://en.wikipedia.org/wiki/Windows_XPhttp://en.wikipedia.org/wiki/Windows_XPhttp://en.wikipedia.org/wiki/Unix-likehttp://en.wikipedia.org/wiki/Unix-likehttp://en.wikipedia.org/wiki/Unix-likehttp://en.wikipedia.org/wiki/Languagehttp://en.wikipedia.org/wiki/Languagehttp://en.wikipedia.org/wiki/List_of_software_categorieshttp://en.wikipedia.org/wiki/List_of_software_categorieshttp://en.wikipedia.org/wiki/CADhttp://en.wikipedia.org/wiki/CAMhttp://en.wikipedia.org/wiki/CAMhttp://en.wikipedia.org/wiki/CAEhttp://en.wikipedia.org/wiki/CAEhttp://en.wikipedia.org/wiki/PLMhttp://en.wikipedia.org/wiki/PLMhttp://en.wikipedia.org/wiki/PLMhttp://en.wikipedia.org/wiki/Software_licensehttp://en.wikipedia.org/wiki/Software_licensehttp://en.wikipedia.org/wiki/Websitehttp://en.wikipedia.org/wiki/Websitehttp://en.wikipedia.org/wiki/Websitehttp://en.wikipedia.org/wiki/Software_licensehttp://en.wikipedia.org/wiki/PLMhttp://en.wikipedia.org/wiki/CAEhttp://en.wikipedia.org/wiki/CAMhttp://en.wikipedia.org/wiki/CADhttp://en.wikipedia.org/wiki/List_of_software_categorieshttp://en.wikipedia.org/wiki/Languagehttp://en.wikipedia.org/wiki/Unix-likehttp://en.wikipedia.org/wiki/Windows_XPhttp://en.wikipedia.org/wiki/Operating_systemhttp://en.wikipedia.org/wiki/Software_release_life_cyclehttp://en.wikipedia.org/wiki/Siemens_PLM_Softwarehttp://en.wikipedia.org/wiki/Software_developerhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/inspection-programming.html,/en_us/products/nx/machining/inspection-programming/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/engineering_process_management.html,/en_us/products/nx/mde/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/engineering_process_management.html,/en_us/products/nx/mde/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/machining.html,/en_us/products/nx/machining/machining/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/tooling_fixture_design.html,/en_us/products/nx/machining/tool_fixture/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/electromechanical_simulation.html,/en_us/products/nx/simulation/electromechanical_simulation/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/mechanical_simulation.html,/en_us/products/nx/simulation/mechanical_simulation/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/electromechanical_systems_design.html,/en_us/products/nx/design/electromechanical/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/electromechanical_systems_design.html,/en_us/products/nx/design/electromechanical/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/mechanical_design.html,/en_us/products/nx/design/mechanical/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/explorer_pages/package_design.html,/en_us/products/nx/design/package/index.shtml8/7/2019 Mandeep Singh MAE[577] Project 01
14/19
14 | P a g e
3.1.5 Abaqus FEA (formerly ABAQUS) [11]
It is also one of the high end tool used forcomputer aided engineering. It is usedextensively in the aerospace , automobileand industrial products industries. It haswonderful capabilities of performing non-linear analysis. It also provides multiphysicsabilities where multiple fields can be jointlystudied under a same roof.
Abaqus FEA uses latest high-performanceparallel computing environments, whichenables us to include details in our modelswhich previously excluded due to limitationsin the computing. This allows us to minimizeassumptions hence providing more accuratesolutions and at the same time it reduces theturnaround time for results. In Abacus wecan import the models from CATIA V5,SolidWorks, and Pro/ENGINEER enable us toconduct FEA more fast and more accurately.It is definitely one of the best FEA packageswith high end computing.
SIMULIA Abaqus FEA (Table extracted from Wikipedia.com)
Original author(s) Dassault Systemes
Developer(s) ABAQUS Inc. ,[11]
Stable release 6.10 / May 24, 2010; 3 months
ago[11]
Development status Actively developed
Operating system Microsoft Windows
Linux
AIX
HP-UX
Platform Intel x86-32 bit
Intel Itanium
Intel x86-64 bit
IBM POWER [3]
Type Computer-aided
engineering , Finite Element
Analysis
License Proprietary commercial software
Website www.simulia.com
http://en.wikipedia.org/wiki/Software_designhttp://en.wikipedia.org/wiki/Software_designhttp://en.wikipedia.org/wiki/Software_designhttp://en.wikipedia.org/wiki/Dassault_Systemeshttp://en.wikipedia.org/wiki/Dassault_Systemeshttp://en.wikipedia.org/wiki/Software_developerhttp://en.wikipedia.org/wiki/Software_developerhttp://en.wikipedia.org/wiki/Abaqus#cite_note-0http://en.wikipedia.org/wiki/Abaqus#cite_note-0http://en.wikipedia.org/wiki/Abaqus#cite_note-0http://en.wikipedia.org/wiki/Software_release_life_cyclehttp://en.wikipedia.org/wiki/Software_release_life_cyclehttp://en.wikipedia.org/wiki/Abaqus#cite_note-wjs-610released-1http://en.wikipedia.org/wiki/Abaqus#cite_note-wjs-610released-1http://en.wikipedia.org/wiki/Abaqus#cite_note-wjs-610released-1http://en.wikipedia.org/wiki/Operating_systemhttp://en.wikipedia.org/wiki/Operating_systemhttp://en.wikipedia.org/wiki/Microsoft_Windowshttp://en.wikipedia.org/wiki/Microsoft_Windowshttp://en.wikipedia.org/wiki/Linuxhttp://en.wikipedia.org/wiki/Linuxhttp://en.wikipedia.org/wiki/AIXhttp://en.wikipedia.org/wiki/AIXhttp://en.wikipedia.org/wiki/HP-UXhttp://en.wikipedia.org/wiki/HP-UXhttp://en.wikipedia.org/wiki/Computing_platformhttp://en.wikipedia.org/wiki/Computing_platformhttp://en.wikipedia.org/wiki/IA-32http://en.wikipedia.org/wiki/IA-32http://en.wikipedia.org/wiki/Intel_Itaniumhttp://en.wikipedia.org/wiki/Intel_Itaniumhttp://en.wikipedia.org/wiki/X86-64http://en.wikipedia.org/wiki/X86-64http://en.wikipedia.org/wiki/IBM_POWERhttp://en.wikipedia.org/wiki/IBM_POWERhttp://en.wikipedia.org/wiki/IBM_POWERhttp://en.wikipedia.org/wiki/List_of_software_categorieshttp://en.wikipedia.org/wiki/List_of_software_categorieshttp://en.wikipedia.org/wiki/Computer-aided_engineeringhttp://en.wikipedia.org/wiki/Computer-aided_engineeringhttp://en.wikipedia.org/wiki/Computer-aided_engineeringhttp://en.wikipedia.org/wiki/Finite_Element_Analysishttp://en.wikipedia.org/wiki/Finite_Element_Analysishttp://en.wikipedia.org/wiki/Finite_Element_Analysishttp://en.wikipedia.org/wiki/Finite_Element_Analysishttp://en.wikipedia.org/wiki/Software_licensehttp://en.wikipedia.org/wiki/Software_licensehttp://en.wikipedia.org/wiki/Proprietary_softwarehttp://en.wikipedia.org/wiki/Commercial_softwarehttp://en.wikipedia.org/wiki/Commercial_softwarehttp://en.wikipedia.org/wiki/Commercial_softwarehttp://en.wikipedia.org/wiki/Websitehttp://en.wikipedia.org/wiki/Websitehttp://www.simulia.com/http://www.simulia.com/http://www.simulia.com/http://en.wikipedia.org/wiki/Websitehttp://en.wikipedia.org/wiki/Commercial_softwarehttp://en.wikipedia.org/wiki/Proprietary_softwarehttp://en.wikipedia.org/wiki/Software_licensehttp://en.wikipedia.org/wiki/Finite_Element_Analysishttp://en.wikipedia.org/wiki/Finite_Element_Analysishttp://en.wikipedia.org/wiki/Computer-aided_engineeringhttp://en.wikipedia.org/wiki/Computer-aided_engineeringhttp://en.wikipedia.org/wiki/List_of_software_categorieshttp://en.wikipedia.org/wiki/IBM_POWERhttp://en.wikipedia.org/wiki/IBM_POWERhttp://en.wikipedia.org/wiki/X86-64http://en.wikipedia.org/wiki/Intel_Itaniumhttp://en.wikipedia.org/wiki/IA-32http://en.wikipedia.org/wiki/Computing_platformhttp://en.wikipedia.org/wiki/HP-UXhttp://en.wikipedia.org/wiki/HP-UXhttp://en.wikipedia.org/wiki/AIXhttp://en.wikipedia.org/wiki/Linuxhttp://en.wikipedia.org/wiki/Microsoft_Windowshttp://en.wikipedia.org/wiki/Operating_systemhttp://en.wikipedia.org/wiki/Abaqus#cite_note-wjs-610released-1http://en.wikipedia.org/wiki/Software_release_life_cyclehttp://en.wikipedia.org/wiki/Abaqus#cite_note-0http://en.wikipedia.org/wiki/Software_developerhttp://en.wikipedia.org/wiki/Dassault_Systemeshttp://en.wikipedia.org/wiki/Software_design8/7/2019 Mandeep Singh MAE[577] Project 01
15/19
15 | P a g e
3.1.6 ANSYS[12]
It is also one of the most advancedsimulation software developed toprovide solution in the area of productdevelopment through finite elementanalysis. This FEA package is one of theoldest FEA packages capturing almost allengineering sectors. The latestworkbench is ANSYS 12. It has thefollowing features adhered (taken from
www.ansys.com) :
a. ANSYS Workbench
b. Geometry and Meshing
c. Multiphysics
d. Structural Mechanics
e. High-Performance Computing
f. Fluid Dynamics
g. Simulation Process & DataManagement
h. Explicit Dynamics
ANSYS, Inc. (Table extracted from Wikipedia.com)
Type Public (NASDAQ : ANSS )
Industry Computer software
Founded Canonsburg, Pennsylvania (1970)
Headquarters Canonsburg, Pennsylvania, USA
Key people Peter J. Smith, Chairman
James E. Cashman, III, President &
CEO
Products ANSYS Multiphysics
ANSYS CFX
ANSYS FLUENT
ANSYS Workbench
HFSS
(See complete listing.)
Employees ~1,600 (2010)
Website www.ansys.com
http://www.ansys.com/products/ansys12-new-features.asp#1http://www.ansys.com/products/ansys12-new-features.asp#2http://www.ansys.com/products/ansys12-new-features.asp#3http://www.ansys.com/products/ansys12-new-features.asp#5http://www.ansys.com/products/hpc/default.asphttp://www.ansys.com/products/ansys12-new-features.asp#4http://www.ansys.com/products/ansys12-new-features.asp#6http://www.ansys.com/products/ansys12-new-features.asp#6http://www.ansys.com/products/ansys12-new-features.asp#8http://en.wikipedia.org/wiki/Types_of_business_entityhttp://en.wikipedia.org/wiki/Types_of_business_entityhttp://en.wikipedia.org/wiki/Public_companyhttp://en.wikipedia.org/wiki/Public_companyhttp://en.wikipedia.org/wiki/NASDAQhttp://en.wikipedia.org/wiki/NASDAQhttp://en.wikipedia.org/wiki/NASDAQhttp://quotes.nasdaq.com/asp/SummaryQuote.asp?symbol=ANSS&selected=ANSShttp://quotes.nasdaq.com/asp/SummaryQuote.asp?symbol=ANSS&selected=ANSShttp://quotes.nasdaq.com/asp/SummaryQuote.asp?symbol=ANSS&selected=ANSShttp://en.wikipedia.org/wiki/Industryhttp://en.wikipedia.org/wiki/Industryhttp://en.wikipedia.org/wiki/Computer_softwarehttp://en.wikipedia.org/wiki/Computer_softwarehttp://en.wikipedia.org/wiki/Canonsburg,_Pennsylvaniahttp://en.wikipedia.org/wiki/Canonsburg,_Pennsylvaniahttp://en.wikipedia.org/wiki/United_Stateshttp://en.wikipedia.org/wiki/United_Stateshttp://en.wikipedia.org/wiki/United_Stateshttp://en.wikipedia.org/w/index.php?title=Peter_J._Smith&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=James_E._Cashman,_III&action=edit&redlink=1http://en.wikipedia.org/wiki/Product_(business)http://en.wikipedia.org/wiki/Product_(business)http://en.wikipedia.org/w/index.php?title=ANSYS_Multiphysics&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ANSYS_CFX&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ANSYS_FLUENT&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ANSYS_Workbench&action=edit&redlink=1http://en.wikipedia.org/wiki/HFSShttp://en.wikipedia.org/wiki/Ansys#Producshttp://en.wikipedia.org/wiki/Employmenthttp://en.wikipedia.org/wiki/Employmenthttp://en.wikipedia.org/wiki/Websitehttp://en.wikipedia.org/wiki/Websitehttp://www.ansys.com/http://www.ansys.com/http://www.ansys.com/http://en.wikipedia.org/wiki/Websitehttp://en.wikipedia.org/wiki/Employmenthttp://en.wikipedia.org/wiki/Ansys#Producshttp://en.wikipedia.org/wiki/HFSShttp://en.wikipedia.org/w/index.php?title=ANSYS_Workbench&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ANSYS_FLUENT&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ANSYS_CFX&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ANSYS_Multiphysics&action=edit&redlink=1http://en.wikipedia.org/wiki/Product_(business)http://en.wikipedia.org/w/index.php?title=James_E._Cashman,_III&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=Peter_J._Smith&action=edit&redlink=1http://en.wikipedia.org/wiki/United_Stateshttp://en.wikipedia.org/wiki/Canonsburg,_Pennsylvaniahttp://en.wikipedia.org/wiki/Computer_softwarehttp://en.wikipedia.org/wiki/Industryhttp://quotes.nasdaq.com/asp/SummaryQuote.asp?symbol=ANSS&selected=ANSShttp://en.wikipedia.org/wiki/NASDAQhttp://en.wikipedia.org/wiki/Public_companyhttp://en.wikipedia.org/wiki/Types_of_business_entityhttp://www.ansys.com/products/ansys12-new-features.asp#8http://www.ansys.com/products/ansys12-new-features.asp#6http://www.ansys.com/products/ansys12-new-features.asp#6http://www.ansys.com/products/ansys12-new-features.asp#4http://www.ansys.com/products/hpc/default.asphttp://www.ansys.com/products/ansys12-new-features.asp#5http://www.ansys.com/products/ansys12-new-features.asp#3http://www.ansys.com/products/ansys12-new-features.asp#2http://www.ansys.com/products/ansys12-new-features.asp#18/7/2019 Mandeep Singh MAE[577] Project 01
16/19
16 | P a g e
3.2 Part B - Create a Google Sites as your MAE477/577 Web Design Portfolio The link to the website is--- https://sites.google.com/site/mandeepsinghcaddesign/
4 DiscussionFurther to our study future analysis on the usage of the CAE packages ,we can also incorporate thereviews of the customer , blogs and discussion forums. Before deciding the efficiency of usage of anyCAE package it can be helpful if one reads the experiences of the users that are found in the variouscustomers reviews,blogs and discussion forums. I think it can also be an good way to judge the efficiencyof any CAE package since the people comments comes from their hands on experiences. Listed beloware the Jobs result( from the website www.monster.com) as on date 7 th September 2010
a. ANSYS : 151 openings
b. Pro/E : >1000 openings
c. CATIA: >1000 openings
d. SolidWorks: 851 openings
e. Abaqus: 2 openings
f. NX: 38 openings
We can see that the jobs required in CATIA and Pro/E are comparatively very high than other CAE tools.
One more fact I have noticed is on the Facebook , the number of people joined the community are listedbelow (just for information):
8/7/2019 Mandeep Singh MAE[577] Project 01
17/19
17 | P a g e
a. Pro/E : 550 members
b. CATIA: 1091 members
c. SolidWorks: 2430 members
d. Abaqus: 123 members
e. NX: 16 members
f. Ansys: 441 members
5 Conclusion
Our study concludes that CATIA , PRO/E and NX are high end tools which are focused in CAE interms of electromechanical field. These CAE packages can model, mechanize and simulate theproduct in a single environment. SolidWorks focuses more on the modeling part and is amedium level of CAE packages. There are many varieties of CAE software in the market. Fromthe above study we can conclude that each CAE package has its own area of focus. For example,CATIA application are inclined more towards aero and auto mobile industries whereas Solid
works concentrate on the modeling and assembly part hence more inclined towards weldedstructures. Abacus and ANSYS are more inclined towards finite element analysis and are usedfor high computing areas. Hence the User interface for solid modeling for ANSYS or ABAQUS isnot better than other CAE packages discussed. At the same time none of the ERP packages likePro/E or CATIA are competitive with the ANSYS or ABACUS in terms of Analysis.
8/7/2019 Mandeep Singh MAE[577] Project 01
18/19
18 | P a g e
CATIA Pro/E NX SolidWorks ANSYS ABAQUSProduct Design with CAD for complex largeAssembly 5 5 5 4 1 1Finite Element Analysis 3 3 3 1 5 5Functional Simulation of Machines andMechanism 5 5 5 4 1 1Heat Transfer 3 3 3 3 5 5Fluid flow 3 3 3 3 5 5Total 19 19 19 15 17 17
Rating 1 Poor
2 average
3 good
4 better
5 Best Above rating is my opinion on how I feel to rate the software package after going through the
literature on these packages. It shows the relative feature comparison with respect to thefeatures required by our job. These kinds of table needs to be developed using more number of people for survey.
For the 5 year usage, I will prefer CATIA over any other package since it has many feature thatprovide complete manufacturing solutions in a single environment. Also there is considerabledemand of this package in the market. For the FEA specifically the packages like ANSYS orABAQUS are used and I will prefer both of them for FEA since both are high end solver for FEAwhere a complex geometry can be analyzed.
8/7/2019 Mandeep Singh MAE[577] Project 01
19/19
19 | P a g e
6 References (Websites)1. Pro/E website - http://www.ptc.com/products/proengineer/
2 Wikipedia Explanation to Pro/E - http://en.wikipedia.org/wiki/Pro_E
3 Wikipedia Explanation to Catia - http://en.wikipedia.org/wiki/Catia
4 Catia product features - http://www.3ds.com/products/catia/portfolio/catia-v6
5 CATIA V6R2011 - FACT SHEET(http://www.3ds.com/products/catia/portfolio/catia-v6 )
6 Solid Works http://www.solidworks.com
7 Solid Works launch of new version http://www.solidworkslaunch.com/
8 Whitepaper from Solid-Works http://www.cv3ds.com/products/solidworks-white-papers.html
9 Wikipedia link to NX http://en.wikipedia.org/wiki/NX_(Unigraphics)
10 NX website http://www.plm.automation.siemens.com/en_us/products/nx/index.shtml
11 Abaqus website http://www.simulia.com/products/abaqus_fea.html
12 Ansys Website www.ansys.com .
http://www.ptc.com/products/proengineer/http://www.ptc.com/products/proengineer/http://en.wikipedia.org/wiki/Catiahttp://en.wikipedia.org/wiki/Catiahttp://www.3ds.com/products/catia/portfolio/catia-v6http://www.3ds.com/products/catia/portfolio/catia-v6http://www.3ds.com/products/catia/portfolio/catia-v6http://www.solidworks.com/http://www.solidworks.com/http://www.solidworks.com/http://www.solidworkslaunch.com/http://www.solidworkslaunch.com/http://www.cv3ds.com/products/solidworks-white-papers.htmlhttp://www.cv3ds.com/products/solidworks-white-papers.htmlhttp://www.cv3ds.com/products/solidworks-white-papers.htmlhttp://en.wikipedia.org/wiki/NX_(Unigraphics)http://en.wikipedia.org/wiki/NX_(Unigraphics)http://en.wikipedia.org/wiki/NX_(Unigraphics)http://www.plm.automation.siemens.com/en_us/products/nx/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/index.shtmlhttp://www.plm.automation.siemens.com/en_us/products/nx/index.shtmlhttp://www.simulia.com/products/abaqus_fea.htmlhttp://www.simulia.com/products/abaqus_fea.htmlhttp://www.simulia.com/products/abaqus_fea.htmlhttp://www.ansys.com/http://www.ansys.com/http://www.ansys.com/http://www.ansys.com/http://www.simulia.com/products/abaqus_fea.htmlhttp://www.plm.automation.siemens.com/en_us/products/nx/index.shtmlhttp://en.wikipedia.org/wiki/NX_(Unigraphics)http://www.cv3ds.com/products/solidworks-white-papers.htmlhttp://www.solidworkslaunch.com/http://www.solidworks.com/http://www.3ds.com/products/catia/portfolio/catia-v6http://en.wikipedia.org/wiki/Catiahttp://www.ptc.com/products/proengineer/