www.manitou.com

Telescopic Handlers

MT835 / MT1135 / MT1335

MT 1335

13 m / 3.5 T

MT 835

8 m / 3.5 T

MT 1135

11 m / 3.5 Twith/withoutstabilizers

2

MANITOU, your partner for your needs for more than50 years whatever your application.

The new telescopic forklifts represent a complete revolutionin methods of lifting between 8 and 13 metres, and offerhigh performance lifting and loading capability:- Standard design benefits for ease of use and maintenance- Compact machines, maximum lift capacity- Choice of transmission - torque convertor or hydrostatic- Platform mode: Full range of MANITOU attachments

These forklifts are your allies in your quest for productivityand simplicity.

The performance and manoeuvrability of the new telescopicMANITOU forklift trucks let you carry out all your building andrenovation tasks quickly and in complete safety.

MANITOU YOUR PARTNER FORALL YOUR HANDLING SOLUTIONSFOR OVER 50 YEARS...

3

SIMPLICITY

You can work with SIMPLICITY and in complete SAFETY

▪ Baskets capacity up to 1000 kg with automatic locking of the rear axle. (MT 14/18 ‘A’ Models only).

▪ Automatic Parking Brake next to the hill start assistance button.

▪ EASY CONNECT SYSTEM allowing the depressurisation of the hydraulic attachment linewithout turning off the engine.

▪ Adjustable continuous flow of hydraulics to the auxiliary services.

▪ Tilt lock out facility for enhanced safety.

▪ Digicode as standard for security and immobilisation.

▪ Radio control (optional).

Simple oPeraTIon and MaInTenanCeCOMMONALITY whatever the model

Spacious and comfortable cabin Ergonomic dashboard

▪ All the information you need: direction of travel, wheel alignment,boom angle, fuel level, hour meter etc.

▪ Stability indicator cutting off aggravating movements. You choosebetween a handling or suspended load mode in order to optimiseyour handling.

JSM® : everything in the palm of your hand

▪ Attachment function control

▪ Extension/retraction control for theboom

▪ Forward/backward/neutral movementselector switch

4

MT 835 / 1135 / 1335

IDENTICAL MAINTENANCE whatever the model

▪ The engine, transmission, hydraulics, cab, frame - all are sourced from the samedesign.

▪ 2-sided opening of the engine compartment - no need to undo any parts,thereby saving maintenance time.

MAINTENANCE and DIAGOSTICS for the machineshown on multi-function screen on the dashboard.

through a wide door witha single notched anti-slip step.

SAFE AND RAPID ACCESS

FULL

36

0°DEGREE VISIBILITY

5

ProDUCTIVITY

6

102 HPpermanent four-wheel driveNew generation STAGE 3Bengine with particle filter.

Frame Levelling(standard on MT 1135 and MT 1335)

Substantial ground clearance

PerForManCe and MaInTenanCe

Accordingto your needshydrostatic transmission ortorque converter (inchingan optional extra) to respondto your working practice.

Permanent4 wheel drivePowerful braking appliedon both axles.

41cm

8 -11-13 m 3.5 T

+/-10°

One nominal loadcapacity

3 lifting heights

6

MT 835 / 1135 / 1335

3 Steering modes

4 steering wheels for short turningspaces on restricted sites

2 front driving wheels to guaranteeon-road safety

Crabwise movement for lateralapproaches and delicate exits

Compact stabilizers(MT 1135 and MT 1335)

which remain within the working widthof the machine whatever their position.

Ultra-short turningradius

3.85 m

7

MT 835 / 1135 / 1335VerSaTILITY

1 2 3

MATERIAL HANDLING

Rehandling Bucket 4 in 1 Bucket Construction Bucket

LOAD PLACING

Forks Hook Jib Lattice Jib Extensible Lattice Jib Winch

PLATFORMS

Fixed Platform 365 kg Extensible Platform 1000 kg

OTHERS

Concrete Mixer Bucket Concrete Bucket

...for a multitude of applicationsVersatility of MANITOU forklifts answers all your on-site needs, making the most of your working time and productivity:

▪ placing of loads

▪ distribution of material in restricted space

▪ bulk loading at depots and on-site

▪ placing suspended loads

▪ lifting personnel...

Your MANITOU forklift, a multi purpose machine...Thanks to the MANITOU attachment system, you can easily and quickly fit numerousattachments to your forklift - forks, buckets, mixers, jibs, platform...

8

MT 835 / 1135 / 1335aPPLICaTIonS

9

MT 835 / 1135 / 1335ManIToU SerVICeS

MANITOU maintenance contract2 levels of maintenance adapted to your needs. You are sure of:

▪ equipment always in good working condition

▪ a reduction of repair costs as a result of regular servicing

▪ authentic standardised services

MANIPLUS extension of guaranteeWith MANIPLUS you can take out an extension of guarantee of 12 or 24 months.

EASY MANAGERA simple and flexible system for fleet management (with or without geolocation) toprovide optimum service from your machines. EASY MANAGER gives you:

▪ real-time materials management

▪ simple and easy way of managing your machinery activity and maintenance.

▪maximise your asset and safeguard your equipment

MANITOU spare partsUtilising genuine MANITOU spare parts is sure to prolong the best performance capability of your machine.Your MANITOU dealer has access to a stock of 70,000 part numbers, available in 24 hours in Europe (48 hours outside Europe).

▪ Labour

▪ Attendance costs▪ Labour▪ Attendance costs

▪ Parts and lubricants

Tailor-made finance to makethe best use of your fundsYou can plan the purchase of your forklift with peace of mindby using MANITOU* financing opportunities.

You will have simple solutions adapted to your needs and seasonalrequirements. If you want to make a rapid investment, consider asking usfor a personalised proposal to take your situation into account.* MANITOU Finance solutions are available in certain countries.

10

FT056EN_C_1113_MT835.indd

MT 835 MT 835 H

LiftingMax. capacity 3500 kgMax. lifting height 7.75 mMax. outreach 4.45 mBreak-out force with bucket 6264 daNUnladen timeLifting 6.6 secsLowering 6.0 secsExtension 6.0 secsRetraction 5.6 secsCrowd 3.2 secsDump 3 secsTyres 400/80-24Braking

Service brake Oil immersed multi-disc braking onfront/rear axles

Parking brake Automatic Negative HandbrakeEngine PERKINS - STAGE 3BType 854E-34TACubic capacity 3400 cm3

Power 102 HP/75 kWMax. torque 420 Nm - 1400 rpmInjection directCooling waterLaden drawbar pull 8200 daN 6200 daN

Transmission torque converter4 wheel drive

hydrostatic4 wheel drive

Reversing shift electrohydraulic control

Number of gears (forward/reverse) 4/4 3/2Max. travel speed(may vary according to applicable regulations)

25 kph or 35 kph

Steering mode 4 wheel steer - 3 Steering Modes

Controls JSM® Joystick multi - functionLoad Limiter Cut off system - EN15000 Norm

Hydraulics

Pump gear type with priority valve125 l/min - 270 bar

CapacitiesHydraulic oil 175 lFuel 120 lUnladen weight (with forks) 7200 kg 7300 kgDimensions1. Front wheel centre to carriage 1.49 m2. Wheelbase 2.88 m3. Rear wheel centre to rear face 0.87 m4. Overall length to carriage 5.24 m5. Ground clearance 0.41 m6. Overall width of cab 0.88 m7. Inside tyre width 1.87 m8. Overall width 2.28 m9. Overall height 2.42 mStandard forks (length x width x thickness) 1200 x 125 x 45 mmTurning radius (over tyres) 3.85 mCarriage rotation (crowd/dump) 12° / 114°Noise and vibrationNoise at driving position (LpA) 82 dBEnvironmental noise (LwA) 106 dBVibration to whole hand/arm <2.5 m/s2

This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the rightto change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differfrom actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure areprovided for information only.MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes

Rough terrain load chartstandard EN1459 annex B

Machine on tyres with forks

50° 60° 68°D

C

B

A

8

7

6

5

4

3

2

1

0m

40°

30°

20°

10°

0°

-3°

7.75

D C B A 0.5m

5 4 3 2 1 0m

3500

KG30

00KG

2500

KG20

00KG

1500

KG

1200

KG

1150

KG

4.25 1.502.95 1.954.45 3.70 2.45 1.70

1 24

3

5

6

7

8

9

11

FT057EN_B_1113_MT1135.indd

MT 1135 MT 1135 H MT 1135 HA

LiftingMax. capacity 3500 kgMax. lifting height 11.05 mMax. outreach 7.75 mBreak-out force with bucket 6305 daNUnladen timeLifting 8.5 secsLowering 7.0 secsExtension 13.0 secsRetraction 9.0 secsCrowd 3.0 secsDump 3.0 secsTyres 400/80-24BrakingService brake Oil immersed multi-disc braking on front/rear axlesParking brake Automatic Negative HandbrakeEngine PERKINS - STAGE 3BType 854E-34TACubic capacity 3400 cm3

Power 102 HP/75 kWMax. torque 420 Nm - 1400 rpmInjection directCooling waterLaden drawbar pull 9150 daN 7150 daN

Transmission torque converter4 wheel drive

hydrostatic4 wheel drive

Reversing shift electrohydraulic controlNumber of gears (forward/reverse) 4/4 3/2Max. travel speed(may vary according to applicable regulations)

25 kph or 35 kph

Steering mode 4 wheel steer - 3 Steering Modes

Controls JSM® Joystick multi - functionLoad Limiter Cut off system - EN15000 Norm

Hydraulics

Pump gear type with priority valve125 l/min - 270 bar

CapacitiesHydraulic oil 175 lFuel 120 lUnladen weight (with forks) 8800 kg 8900 kgDimensions1. Front wheel centre to carriage 1.60 m2. Wheelbase 2.88 m3. Rear wheel centre to rear face 0.89 m4. Overall length to carriage 5.37 m5. Ground clearance 0.41 m6. Overall width of cab 0.88 m7. Inside tyre width 1.87 m8. Overall width 2.28 m9. Overall width (stabilizers lowered) 2.28 m10. Overall height 2.42 mStandard forks (length x width x thickness) 1200 x 125 x 45 mmTurning radius (over tyres) 3.85 mFrame levelling +/- 10°Carriage rotation (crowd/dump) 16°/110°Noise and vibrationNoise at driving position (LpA) 82 dBEnvironmental noise (LwA) 106 dBVibration to whole hand/arm <2.5 m/s2

78

6

10

94

2

5

1 3

12

FT057EN_B_1113_MT1135.indd

This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the rightto change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differfrom actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure areprovided for information only.MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes

Rough terrain load chartstandard EN1459 annex B

Machine on stabilizers with platform(MT 1135 HA version)

Machine on tyres with forks Machine on stabilizers with forks

1415

1312

1110

9876

5

43

2

10

-18 7 6 5 4 3 2 1 0 -1 -2 -3 -4910

8.55 6.156.75

7.35

kg + =1000kg

10.88m

12.88m

5.27m

50°

0°

10°

20°

30°

40°

60° 70°

EN280

kg + =700kg

kg + =365kg

kg + =150kg

68°60°50°

40°

30°

20°

10°

0°-3°

10.75

8 7 6 5 4 3 2 0m1

10

0

1

2

3

4

5

6

7

8

9

-1

11

2.052.804.155.356.852.353.357.75

0.5m

E

D

C

B

A

400

KG 600

KG 1000

KG 1500

KG20

00KG

3000

KG25

00KG

3500

KG

0

10

1

2

3

4

5

6

7

8

9

-1

11

8 7 6 5 4 3 2 1 0m

3500

KG

3000

KG25

00KG

2000

KG16

00KG

1200

KG

D

C

B

A

E

0.5m

7.60 4.856.50 4.25

5.65 3.75

1°

10°

20°

30°

40°

50° 60° 72°

11.05

13

FT030EN_D_1113_MT1335.indd

MT 1335 MT 1335 H MT 1335 HA

LiftingMax. capacity 3500 kgMax. lifting height 12.55 mMax. outreach 8.75 mBreak-out force with bucket 6400 daNUnladen timeLifting 9.8 secsLowering 8.2 secsExtension 14.2 secsRetraction 9.7 secsCrowd 2.7 secsDump 2.8 secsTyres 400/80-24BrakingService brake Oil immersed multi-disc braking on front/rear axlesParking brake Automatic Negative HandbrakeEngine PERKINS - STAGE 3BType 854E-34TACubic capacity 3400 cm3

Power 102 HP/75 kWMax. torque 420 Nm - 1400 rpmInjection directCooling waterLaden drawbar pull 9800 daN 7800 daN

Transmission torque converter4 wheel drive

hydrostatic4 wheel drive

Reversing shift electrohydraulic controlNumber of gears (forward/reverse) 4/4 3/2Max. travel speed(may vary according to applicable regulations)

25 kph or 35 kph

Steering mode 4 wheel steer - 3 Steering Modes

Controls JSM® Joystick multi - functionLoad Limiter Cut off system - EN15000 Norm

HydraulicsPump gear type with priority valve - 125 l/min - 270 barCapacitiesHydraulic oil 175 lFuel 120 lUnladen weight (with forks) 8800 kg 8900 kgDimensions1. Front wheel centre to carriage 1.80 m2. Wheelbase 2.88 m3. Rear wheel centre to rear face 1.18 m4. Overall width of cab 0.88 m5. Ground clearance 0.41 m6. Overall length to carriage 5.86 m7. Inside tyre width 1.87 m8. Overall width 2.28 m9. Overall width (stabilizers lowered) 2.28 m10. Overall height 2.42 mStandard forks (length x width x thickness) 1200 x 125 x 45 mmTurning radius (over tyres) 3.85 mFrame levelling +/- 10°Carriage rotation (crowd/dump) 12°/114°Noise and vibrationNoise at driving position (LpA) 82 dBEnvironmental noise (LwA) 106 dBVibration to whole hand/arm <2.5 m/s2

42

5

1 3 78

6

10

9

14

FT030EN_D_1113_MT1335.indd

This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the rightto change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differfrom actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure areprovided for information only.MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes

Rough terrain load chartstandard EN1459 annex B

Machine on tyres with forks Machine on stabilizers with forks

Machine on stabilizers with platform(MT 1335 HA version)

20°

10°

0°

30°

40°

-3°

50° 60° 71°

13

0

1

2

3

4

5

6

7

8

9

10

11

12

14

-1

12.30

410 9 0m1235678

2.252.55

3.655.106.358.25

E

D

C

B

A3000KG

300K

G 400K

G 600K

G 1000

KG12

00KG

1600

KG20

00KG

2500

KG

800K

G

3500KG

7.30 3.05 1.854.255.608.754.555.858.05

1.805.206.758.75

3000

KG 3500

KG

2000

KG25

00KG

1200

KG

1600

KG

1000

KG

E

D

C

B

A

13

14

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

50° 60° 70° 75°

12.55

8 7 6 5 4 3 2 1 0m910

0.5m

40°

30°

20°

10°

1°

kg + =700kg

kg + =365kg

kg + =150kg

EN 280141516

131211109

87654

321

0-1

8 7 6 5 4 3 2 1 0 -1 -2 -3 -4 -591011

50°

0°10°

20°

30°

40°

75°60°

70°

14.40m12.40m

5.78m

kg + =1000kg

9.25 7.85

15

Your nearest MANITOU dealer:

700506EN_C_1113_MT8_11_13.indd

Head office:B.P. 249 - 430 rue de l’Aubinière - 44158 Ancenis Cedex - France

Tel: 00 33 (0)2 40 09 10 11 - Fax: 00 33 (0)2 40 09 10 97www.manitou.com