Manual 2018 Invisible 6 P/L US/CN - Vitra | home Invisible 6 P/L profile electrified, without power...

Invisible 6 P/L

MANUAL 2018RETAIL SYSTEMS

USA AND CANADA

Dimensions are generally shown in inches (approximate) and millimetres (exact).

Ito = Length to order hto = Height to ordercto = Colour to order L = Length A = Axis H = Height

Delivery timePlease check delivery times with us.

Air freightItems which are to be dispatched by air must not exceed a total length of 3 metres.

Drawings of wooden and glass shelvesProduction drawings of shelves with the 6 digit part number are available for downloading on www.vitra.com or can be received on request.

Assembly and operating instructions Special assembly and operating instructions exist for all retail product ranges by Vitra in order to guarantee the functions and safety. These instructions contain important information e.g. maximum weight loads, assembly dimensions or information on the correct assembly and use. The respective assembly and operating instructions are included in the delivery of our systems. A general catalogue is also available on request for planning purposes. The assembly and operating instructions are also available for downloading on www.vitra.com or can be received on request.

Powder-coated finishes duro

Anodised finishes for aluminium

bright silver duro

pearl *

sterling silver duro

black steel duro

bright silver mistral

natural anodised aluminium

silver mat

black anodised aluminium

Finish Galvanised finishes

chrome silk

traffic white duro

dark bronce

grey aluminum mistral

pearl gold

rusty iron

patina dark (not opaque)

Standard and special colours (powder-coated)

Suitable for merchandise supports and structural systems. Not suitable for large surfaces or for system parts in aluminium. * on request

Only for aluminium system parts, such as profiles, uprights and frames.

Duro powder-coated surfaces are suitable for all systems, as well as for merchandise supports subject to heavy abrasion.

Suitable for all systems – less so for merchandise supports subject to heavy abrasion.

Vitra always tries to respect the rights of third parties. Should it not be stated in individual cases, this is an oversight and will be corrected accordingly.

Inde

xISO 9001 / ISO 14001

All processes in our company are subject to a comprehensive management system which corresponds with the ISO 9001 quality standard and the ISO 14001 environment standard.

The safety of electric products is certified by the CE mark.

Copyright ©

All retail products by Vitra and their names are protected by intellectual property rights. This protection is valid for the basic system along with the merchandise supports and accessories.

In the event of infringement, Vitra reserves the right to take legal steps.

• Our general conditions of delivery and sale are valid for all orders.• We reserve the right to make technical and formal alterations.

Horizontal Invisible 6 P/L

50 1/2018 (US)

v

Horizontal

Invisible 6 P/L profileelectrified, without power supply

Power supply 24 V left Power supply 24 V right

Dimensions

Dimensions are generally shown in inches (approximate) and millimeters (exact)

ø 0.295“(7.5 mm)

6.152“(156.25 mm)

118.110“ (3000 mm)lto

NV L = 78.740“(2000 mm)

ø 0.303“ (7.7 mm)

2

0.866“(22 mm)

NV L = 78.740“(2000 mm)

ø 0.303“ (7.7 mm)

0.866“(22 mm)

0.079“(2 mm)

0.079“(2 mm)

Characteristics Electrical profile must only be connected by authorised qualified personnel.

Please observe max. weight loads of merchandise supports.

No alterations may be made to the Invisible 6 P/L profile for safety reasons, with the exception of shortening the profile. Only Invisible 6 P/L merchandise supports and accessories may be used. Do not use any other parts!

Nominal voltage = 24 V DC Current max. 4 A

Max. weight load = 88.2 lbs per 25"

Observe the assembly and operating instruction

Nominal voltage = 24 V DC Nominal current max. 9.5 A


Nominal voltage = 24 V DC Nominal current max. 9.5 A

It is essential that the insulation piece is fitted between two profiles that are powered separately!


Order number natural anodised aluminium118" 225-982.05lto 26"–118" 323-566.05black anodised aluminium118" 225-982.06lto 26"–118" 323-566.06

An extra 0.945" (24 mm) must be added to the profile length (for the power supply and end cap).

silver 227-329.19black 227-329.06

Incl. 1 flat end cap and 2 round end caps.

silver 332-409.19black 332-409.06

Incl. 1 isolation, 1 flat end cap and 2 round end caps.

Invisible 6 P/L

511/2018 (US)

v


24 V distributor, 6-way 96 W LED converter Invisible 6 P/L profilewithout electrical power

End capsfor a round profile end

120 VL = 78.740“(2000 mm)

NV (24 V)L = 19.685“(500 mm)

ø 0.303“ (7.7 mm)

119.055“ (3024 mm)lto

ø 0.295“(7.5 mm)

6.152“(156.25 mm)

For powering up to 6 profiles with a max. 96 W converter.

Check the power consumption of electrical appliances!

A switch input enables use of a power switch.

Nominal current max. 4 A (96 W)

The total power used by the connected appliances may not exceed the converter’s max. capacity.

Connection 100–240 V / 50–60 Hz Nominal voltage = 24 V DC / SELV Current max. 4 A



Only Invisible 6 P/L merchandise supports and accessories may be used. Do not use any other parts!



To be inserted into profile without electrical power. For left and right.

white 138-974.19

white349-119.19

natural anodised aluminium119" 334-945.05lto 28"–119" 334-946.05black anodised aluminium119" 334-945.06lto 28"–119" 334-946.06

The profile length is the total length of the powered profile including power supply and end cap.

silver 322-140.05black 322-140.06

Set of 2 pcs.

52 1/2018 (US)

v

HorizontalInvisible 6 P/L

Uprightfor Invisible 6 P/L profile

Side cover set Invisible 6 P/L holder setfor wooden panels, without electrification

Spacerfor holder

110.039”(2795 mm)

109.

803”

(278

9 m

m)

10 x

¾" (19 mm)

10 x

Profiles (electrified and without electrical power!) from the Invisible 6 P/L program can be flexibly mounted into the substructure and rearranged.


For covering both sides of an Invisible 6 P/L wall with the upright 336-218.21.


Max. weight load = 44.1 lbs per holder


Spacers for holder sets are only required when holders are used in 16 mm wooden panels.

zinc coated 336-218.21

cto 094-748.07

Incl. fixing set.


Set of 10 pcs, each with 6 screws.

Set of cover caps must be ordered separately.

black 929-192.06

Set of 10 pcs.

531/2018 (US)

v


Cover cap set Invisible 6 P/L profilefor attachment from the front, without electrification

Profile cover End cap

10 x

122.047" (3100 mm)lto

122.047" (3100 mm)lto

Plastic.

For Invisible 6 P/L holder set.


Attachment from the front, for walls (gypsum, concrete, brick, wood).




Is clipped-on once the profile has been fitted.

chrome 929-176.01silk 929-176.30

Set of 10 pcs.

natural anodised aluminium122" 334-878.05lto 10"–122" 334-873.05

Incl. profile cover.

natural anodised aluminium122" 334-876.05lto 10"–122" 323-813.05

For repeat orders.

silver mat 323-903.48

Incl. fixing set.Set of 2 pcs.

54 1/2018 (US)

v


Mounting clips for paneling Single power adapter 24 Vwith locking mechanism, for various appliances

Universal bracketfor Invisible 6 P/L profiles

Universal lugfor wooden back panel

L = 19.685“(500 mm) open

closed

1.102"(28 mm)

The mounting clips enable the flexible hanging and taking down of the covering panels.

Per panel, a distance of 312.5 mm a mounting clip is required as fastening point.


To be inserted into the electrical profile. The single power adapter must only be connected by authorised qualified personnel.

In addition to the connection of lighting fixtures, it is also possible to connect other types of electrical equipment whose overall power consumption does not exceed 4 A.

The single power adapter may only be used with the Invisible 6 P/L profile!

Nominal voltage = 24 V DC Nominal current max. 4 A


Is inserted into Invisible profile to support universal lug.

Cannot be used in Invisible 6 P/L holder set.

Max. weight load = 44.1 lbs per bracket

Is fitted over universal bracket.

Max. weight load = 44.1 lbs per lug

black 323-572.06

Set of 50 pcs.

silver � 225-945.19black � 225-945.06

Incl. supply cable for electrical appliances L = 19.865".



551/2018 (US)

v


Spacerfor wooden back panel

Fixing setfor Invisible 6 P/L profiles

Glass shelf with LED lightingFashion

Aluminium shelf with LED lightingFashion

1.102"--1.457"(28--37 mm) 24.409"

(620 mm)

16.535"(420 mm)

16.535"(420 mm)

24.409"(620 mm)

To be screwed to the back of wooden panels.


Max. weight load = 44.1 lbs

Safety glass 6 mm.

To be inserted into electrical profile.

The glass in the area closest to the LED profile is 3°C warmer than the ambient temperature.

Nominal voltage = 24 V DC Electric power: 6 W Colour temperature: 3000 K SDCM3 Colour rendering index: 92 Luminous flux: 1000 lm/m with opal diffuser


Max. display depth = 14.370"

Safety glass 6 mm.







raw chromed 929-322.41

Consisting of adapter and suspension lug.

lighting: natural anodised aluminium. safety glass, clear24" (6 W) 318-666.43safety glass, satinato24" (6 W) 318-666.46lighting: black anodised aluminium. safety glass, clear24" (6 W) 318-666.53safety glass, satinato24" (6 W) 318-666.56

Incl. locking device 349-118.12

lighting: natural anodised aluminium. bright silver duro24" (6 W) 318-669.12lighting: black anodised aluminium. black steel duro24" (6 W) 318-669.22


56 1/2018 (US)

v


Glass shelf with LED lightingHealth & Beauty

Single power adapter 24 Vfor wooden shelf

Bracket Ø 5⁄8"for electrified wooden shelf, concealed

Locking decive for shelf

10.039"(255 mm)

31.024"(788 mm)

L = 19.685“(500 mm)

6.890“(175 mm)

ø 0.591“(15 mm)

Safety glass 6 mm.






With mounting plate for wooden shelf.

To be inserted into the electrical profile. The single power adapter must only be connected by authorised qualified personnel.

The single power adapter may only be used with the Invisible 6 P/L profile!

Nominal voltage = 24 V DC Nominal current max. 4 A

Drawing no. 247-148 Wooden shelf




Drawing no. 229-881 620 mm 229-882 995 mm 229-883 1245 mm Wooden shelf for LED lighting


The locking device for shelf 349-118.12 is required and must be used with all shelves!

lighting: natural anodised aluminium. safety glass, clear31" (7 W) 318-672.43safety glass, satinato31" (7 W) 318-672.46lighting: black anodised aluminium. safety glass, clear31" (7 W) 318-672.53safety glass, satinato31" (7 W) 318-672.56


silver � 225-946.19black � 225-946.06

Incl. supply cable for electrical appliances L = 19.865".

At least 2 brackets 321-729.31 are required per shelf.

raw silk 321-729.31

Locking device for shelf 349-118.12 must be ordered separately.

At least 2 brackets are required per shelf.

349-118.12

571/2018 (US)

v


LED lighting fixture with cable connectionfor wooden shelf

Front arm, straight Ø 1" Front arm, stepped Ø 1" Front arm, straight Ø 1"stepped upwards

22.835"(580 mm)

3.937“ (100 mm)11.811“ (300 mm)

ø 0.984“(25 mm)

11.811"(300 mm)

4.921"(125 mm)

ø 0.984"(25 mm)

ø 0.984“(25 mm)

5.906“(150 mm)

12.992“(330 mm)

Cabel outlet sidewards.

Nominal voltage = 24 V DC Electric power: 6 W Colour temperature: 3000 K / 4000 K SDCM3 Colour rendering index: 92 Luminous flux: 1000 lm/m with opal diffuser LED board with reverse polarity protection

Drawing no.: 247-148 Wooden shelf


Max. weight load = 55.1 lbs Max. weight load = 55.1 lbs Max. weight load = 44.1 lbs

lighting: natural anodised aluminium 3000 Kelvin23" (6 W) 332-420.054000 Kelvin23" (6 W) 332-436.05lighting: black anodised aluminium 3000 Kelvin23" (6 W) 332-420.064000 Kelvin23" (6 W) 332-436.06

Incl. supply cable l = 39" (halogen-free cable).

chrome4" 987-326.0112" 987-328.01silk4" 987-326.3012" 987-328.30cto4" 987-326.0712" 987-328.07

chrome 987-337.01silk 987-337.30cto 987-337.07

chrome 371-181.01silk 371-181.30cto 371-181.07

58 1/2018 (US)

v


Side hanging rail Ø 1", 24"T-arm

Bracket Ø 1"for side hanging rail Ø 1"

Bracket Ø 1"for side hanging rail Ø 1", stepped upwards

Bracket Ø 1"for side hanging rail Ø 1", stepped

11.811"(300 mm)

23.622"(600 mm)

ø 0.984"(25 mm)

11.811"(300 mm)

ø 0.984"(25 mm) 5.906“

(150 mm)

12.992“(330 mm)

ø 0.984"(25 mm)

11.811"(300 mm)

ø 0.984"(25 mm)

1.772" (45 mm)

Recommended for use in Invisible 6 P/L holder set.


Coat-hangers can slide along the entire length of the side hanging rail.







Drawing no. 374-263 Glass shelf 6 mm with cutouts. To be inserted into the profile. The cutouts make it possible to insert further stepped brackets for side hanging rail.

Drawing no. 286-517 Wooden shelf 26 mm

chrome 987-879.01silk 987-879.30cto 987-879.07

chrome 987-880.01silk 987-880.30cto 987-880.07

At least 2 brackets are required per side hanging rail.

chrome 341-883.01silk 341-883.30cto 341-883.07


chrome 987-881.01silk 987-881.30cto 987-881.07


591/2018 (US)

v


Side hanging rail Ø 1" Bracket Ø 1"for wooden shelf

T-bracket Ø 1"for wooden or glass shelf

Bracket Ø 5⁄8"for non electrified wooden shelf, concealed

ø 0.984"(25 mm)

lto

11.024“(280 mm)

ø 0.984"(25 mm)

14.764"(375 mm) 11.024"

(280 mm)

ø 0.984"(25 mm)

6.890“(175 mm)

ø 0.591“(15 mm)

To be inserted into brackets for side hanging rail.







Drawing no. 978-388 Glass shelf 8 mm




Drawing no. 229-885 620 mm 229-886 995 mm 229-887 1245 mm Wooden shelf for LED lighting


chromelto 24"–96" 906-333.01silklto 24"–96" 906-333.30ctolto 24"–96" 906-333.07

24.409"–49" => 2 brackets 49"–74" => 3 brackets 74"–96.260" => 4 brackets

chrome 987-933.01silk 987-933.30cto 987-933.07


chrome 987-903.01silk 987-903.30cto 987-903.07

raw silk 987-348.31


60 1/2018 (US)

v


Front arm, straight Ø 1⁄2" Front arm, curved Ø 1⁄2" Side hanging rail Ø 5⁄8", 15 3⁄8"T-arm

Bracket Ø 1⁄2"for side hanging rail Ø 5⁄8"

5.906" (150 mm)11.811" (300 mm)

ø 0.472"(12 mm)

11.811"(300 mm)

ø 0.472"(12 mm)

ø 0.472"(12 mm)

9.843"(250 mm)

15.354"(390 mm)

ø 0.591"(15 mm)

ø 0.472"(12 mm)

9.843"(250 mm)

ø 0.591"(15 mm)

Max. weight load = 22.0 lbs With 11 pins.






chrome6" 397-029.0112" 397-030.01silk6" 397-029.3012" 397-030.30cto6" 397-029.0712" 397-030.07

chrome 397-084.01silk 397-084.30cto 397-084.07

chrome 397-058.01silk 397-058.30cto 397-058.07

chrome 987-840.01silk 987-840.30cto 987-840.07


611/2018 (US)

v


Side hanging rail Ø 5⁄8" Angled shelf 30° Hook railfor ties, belts etc.

Hook, straight Ø 9⁄32"

ø 0.591"(15 mm)

lto

8.661"(220 mm)

12.205"(310 mm) 21.063"

(535 mm)

3.937"(100 mm)

ø 0.295"(7.5 mm)

4.094“(104 mm)

3.937" (100 mm)5.906" (150 mm)7.874" (200 mm)

ø 0.295"(7.5 mm)

To be inserted into brackets for side hanging rail.

For DIN A4 format.


With 6 hooks Ø 9⁄32".


Holder in grey plastic.



chromelto 520–2445 mm 906-329.01silklto 520–2445 mm 906-329.30ctolto 520–2445 mm 906-329.07

20.472"–31" => 2 brackets 31"–47" => 3 brackets 47"–63" => 4 brackets 63"–96.260" => 5 brackets

silver mat 374-370.48cto 374-370.07

silk 919-529.30cto 919-529.07

chrome4" 397-024.016" 397-025.018" 397-026.01silk4" 397-024.306" 397-025.308" 397-026.30

62 1/2018 (US)

v


Scliss

100 x

R 0.807“(20.5 mm)

Prevents scratches on hanging rails and front arms in silk or stainless steel.

To clip into coat hanger hook (Ø 0.134"–0.150" / Ø 3.4–3.8 mm).

transparent 929-449.02

Set of 100 pcs.

631/2018 (US)

v

www.vitra.com | [email protected]

Date post:	09-Mar-2018
Category:	Documents
Upload:	trinhcong
View:	242 times
Download:	9 times

Manual 2018 Invisible 6 P/L US/CN - Vitra | home Invisible 6 P/L profile electrified, without power...

Documents