Manual de La TPS Technitube Tube & Pipe Sizes

Tube & Pipe SizesThe unique Databook containing comprehensive information andComparison Tables on Sizes, weights and general data of Pipes, Tubes,Fittings, Flanges, Bars, Sheet & Strip, Hollow Sections and related products according to main International Standards.

4TH NEW EDITION

TPS-Technitube Röhrenwerke GmbHIndustriegebiet • D-54550 Daun, GermanyP.O. Box 509 • D-54541 Daun, Germany

PHONE: (49) 6592 7120 • FAX: (49) 6592 1305E-Mail: [email protected]: www.TPS-Technitube.de

Other TPS product catalogues• Seamless and welded stainless steel tubes and pipes -

general information

• Techalloy; Nickel and special grades

• Seamless and welded titanium tubes

• Stock- heat exchanger- and condenser tubes

• Non-Ferrous heat exchanger &

condenser tubes

• Extended surface tubes - Fin tubes

• Techniseal - OCTG - Premium coupling connections

for tubing and casing

• Multiseal - Two step premium integral tubing

connections

• Multiseal - Flush Joint - Two step premium flush joint

connections

• Optiflow Connections - High Performance Tubing

and Casing Coupling Connections

• API Connections

• Drill Pipe

• OCTG - Grades and Sizes

• Fittings, Flanges and Forgings in special Grades for

Piping Systems

• Tube & Pipe Sizes - Databook 3rd edition

• Catalogues on CD-ROM available

TPS

Tech

nitu

be ·

Tube

& P

ipe

Size

s

• T

PS T

echn

itube

· Tu

be &

Pip

e Si

zes

TP

S T

&P

339_

00

TPS TUBE & PIPE SIZES

We are pleased to present you this revised edition of „Tube and Pipe Sizes“.

In 1976 TPS-Technitube published the first edition of the catalogue „Tube and Pipe Sizes“ for the benefit of itscustomers. Now, after more than 24 years, we present a revised reprint with some more additional data sheets.Our 1976 edition of „Tube and Pipe Sizes“ has become the basic tool for both commercial and technical people inthe pipeline, petrochemical, refinery, power and energy industries and we are sure that this will be again the casewith our new edition.

TPS-Technitube Röhrenwerke GmbH is among the leading manufacturers of piping materials. Our main productionfacilities are in Daun/F.R.-Germany, fully TÜV and API-approved, and we also have partnerships with otherEuropean manufacturers.

TPS-Technitube Röhrenwerke GmbH is offering a totally new kind of service to the energy and related industries,consisting of a full range supply-service for pipes, tubes, fittings, flanges, valves, forgings and other relatedproducts.

At TPS-Technitube Röhrenwerke, we are always at your service. Please be so kind and send us your enquiries.



TPS TUBE & PIPE SIZES 3

CONTENTS

Page

6 - 15 . . . . . . . ANSI B 36.10 Dimensions and Weights of Seamless and Welded Steel Pipe

16 - 17 . . . . . . . DIN 2448 Seamless Tubes - Dimensions and Weights

18 - 19 . . . . . . . DIN 2458 Welded Steel Tubing and Pipe - Dimensions and Weights

20 - 21 . . . . . . . JIS G 3456 / 3458 / 3460 / 3454 - Dimensions and Weights Pipes and Tubes of Japanese Industrial Standards

22 . . . . . . . . . . . TPS Web Site and E-Mail address

23 . . . . . . . . . . . BS 1600 Dimensions and Weights - Welded and Seamless Steel Pipes

24 - 25 . . . . . . . ISO / BS 1387 / DIN 2440 / DIN 2441 - Threaded Pipe - Dimensions and Weights

26 . . . . . . . . . . . JIS G 3452 Dimensions and Weights - Carbon Steel Ordinary Piping - Black / Galvanized

27 . . . . . . . . . . . ANSI B 2.1 Standard Pipe Threads

28 - 29 . . . . . . . Hollow Bars - Dimensions and Weights

30 - 31 . . . . . . . Structural Hollow Sections - Dimensions, Properties and Weights

32 - 43 . . . . . . . Precision Steel Tubes - Dimensions and Weights

44 - 46 . . . . . . . Rectangular / Square Precision Tubes - Dimensions and Weights

47 . . . . . . . . . . . Hydraulic Tubes ST 37.4 - Dimensions and Weights

48 . . . . . . . . . . . ANSI B 36.19 - Stainless Steel, Pipes, Dimensions and Weights

49 . . . . . . . . . . . JIS G 3459 - Stainless Steel Pipes - Dimensions and Weights

50 . . . . . . . . . . . Seamless Stainless Steel Tubes - Dimensions and Weights

51 . . . . . . . . . . . Welded Stainless Steel Tubes - Dimensions and Weights

52 - 55 . . . . . . . Condenser and Heatexchanger Tubes - Dimensions and Weights

56 . . . . . . . . . . . JIS G 3463 Boiler and Heatexchanger Tubes - Dimensions and Weights

57 . . . . . . . . . . . Non-Ferrous Heatexchanger Tubes - Dimensions and Weights

58 . . . . . . . . . . . TPS Stock Range Heatexchanger Tubes

59 . . . . . . . . . . . SWG-BWG Conversion, Tables

60 - 83 . . . . . . . Fin Tubes - Technifin - All Types - Dimensions / Materials / Weights and Properties

84 - 85 . . . . . . . Studded Tubes - TechniStud - Dimensions

86 . . . . . . . . . . . Steel Sheets and Plates - Standard Sizes - Dimensions and Weights

87 . . . . . . . . . . . Floor Plates / Corrugated Sheets

88 . . . . . . . . . . . Round / Square and Hexagon Steel Bars - Dimensions and Weights

89 . . . . . . . . . . . Flat Bars - Dimensions and Weights

90 - 96 . . . . . . . Beams / Angles / Channels / Tees - European and American Standards - Dimensions and Weights

4 TPS TUBE & PIPE SIZES

97 . . . . . . . . . . . Reinforcing Bars - Dimensions / Weights and Comparision of Grades

98 . . . . . . . . . . . Cast Iron Bars / Bushings - Dimensions and Weights

99 . . . . . . . . . . . Copper Tubes - Dimensions and Weights

100 . . . . . . . . . . Copper Square Tubes - Dimensions and Weights

101 . . . . . . . . . . Copper Bars - Dimensions and Weights

102 . . . . . . . . . . Copper Pipes - ASTM - Dimensions and Weights

103 . . . . . . . . . . Brass Tubes - Dimensions and Weights

104 . . . . . . . . . . Brass Tubes / Sheets / Strip / Foil - Dimensions and Weights

105 . . . . . . . . . . Brass Bars - Dimensions and Weights

106 . . . . . . . . . . Brass Flat Bars - Dimensions and Weights

107 - 108 . . . . . Aluminium Tubes - Dimensions and Weights

109 - 111. . . . . . Aluminium Sheets / Bars - Dimensions and Weights

112 - 113. . . . . . Bronze Hollow Bars / Bushing - Dimensions and Weights

114 . . . . . . . . . . Casted Bushings / Flat Bars / Square Bars - Dimensions and Weights

115 - 121. . . . . . Flanges - Dimensions and Weights / Materials

122 - 124 . . . . . Stud Bolts / Nuts - Dimensions and Weights

125 - 131 . . . . . Butt Welded Fittings - Dimensions and Weights

132 - 134 . . . . . Forged Fittings - Dimensions and Weights

135 - 144 . . . . . Cupronickel 90/10 Piping System - Dimensions / Weights and Specifications

145 . . . . . . . . . . Copper-Nickel / Brass Pipes - Copper-Nickel / Brass Tubes - Dimensions and Stock Range

146 . . . . . . . . . . Comparision Tables / Service Temperatures - Boiler and Heatexchanger Tubes

147 . . . . . . . . . . Comparision Tables - Pipes / Plates / Forgings

148 - 157 . . . . . Comparision of Mechanical and Chemical Properties - ASTM / DIN and BS Specifications Steel, Tubes & Pipes

158 . . . . . . . . . . Coefficient of Thermal Expansion

159 - 160 . . . . . JIS G 3463 / 3459 / 3446 / 3447 - Chemical Analysis and Mechanical Properties

161 - 162 . . . . . JIS G 3467 / 3458 / 3441 / 3464 / 3454 / 3455 / 3456/3445 / 3461 / 3462 / 4105Chemical Analysis and Mechanical Properties

163 . . . . . . . . . . Aluminium Brass Alloy 687 - Comparision Table

164 . . . . . . . . . . Admiralty Brass Alloy 443 - Comparision Table

165 . . . . . . . . . . Copper Nickel 90/10 Alloy 706 - Comparision Table

166 . . . . . . . . . . Copper Nickel 70/30 Alloy 715 - Comparision Table

167 . . . . . . . . . . Copper Nickel Iron Manganese 66/30/2/2 Alloy 71640 - Comparision Table


168 . . . . . . . . . . Steel Heatexchanger Tubes - Main Grades - Chemical Analysis

169 . . . . . . . . . . TPS Stock Range - Heatexchanger Tubes - Comparision Tables

170 . . . . . . . . . . Round Bars - Carbon & Alloy Steel

171 - 178 . . . . . Steel Plates - Chemical Analysis and Mechanical Properties

179 . . . . . . . . . . Steels for General Structural Purposes - DIN 17100 - Chemical Analysis and Mechanical Properties

180 - 181 . . . . . Steel Plates - BS 1501 - Chemical Analysis and Mechanical Properties

182 . . . . . . . . . . Galvanized Plates BS 2989

183 . . . . . . . . . . Galvanizing Technical Summary

184 - 194 . . . . . Comparison of International Standards

195 - 197 . . . . . Duplex Stainless Steel and Special Alloys - Technical Data

198 - 213 . . . . . Nickel and Nickel Alloys - Technical Data

214 - 216 . . . . . Titanium Tubes - Technical Data

217 . . . . . . . . . . Comparison Table of Condenser Tube Materials with other Materials - Typical Tensile Properties & Hardness

218 - 225 . . . . . Copper Alloy Tube Sheets - Technical Data

226 . . . . . . . . . . Copper / Copper Alloys - Comparision of International Standards

227 . . . . . . . . . . BronzeComparision of International Standards

228 . . . . . . . . . . AluminiumComparision of International Standards

229 . . . . . . . . . . Aluminium - Technical Data

230 . . . . . . . . . . Bimetallic Tubes

231 . . . . . . . . . . Open Steel Flooring / Gratings

232 . . . . . . . . . . Welding End Preparation of Steel Pipes

233 - 234 . . . . . Industrial Plastics

235 . . . . . . . . . . Conversion Tables Temperatures - °C �°F

236 . . . . . . . . . . Freight Cost Calculations for Tubes

237 . . . . . . . . . . Common Steel, Export and Shipping Technology

238 . . . . . . . . . . Conversion Tables - Linear / Square / Cubic Measures and Weight

240 - 241 . . . . . Order Form for Catalogues and other Media


ANSI B 36.10Dimensions and Weights of Seamless and Welded Steel Pipe

according to ANSI-B 36.10 supplemented with all new dimensions of API Stds. 5 L, 5 LS and 5 LX

Size Outside Wall Weight IdentificationDiameter Thickness

in. in. mm in. mm ln/ft kg/m API STD ScheduleXS; XXSNo

1/8 0,405 10,3 0,068 1,7 0,24 0,357 5L STD 400,095 2,4 0,31 0,461 5L XS 80

1/4 0,540 13,7 0,088 2,2 0,42 0,625 5L STD 400,119 3,0 0,54 0,804 5L XS 80

3/8 0,675 17,1 0,091 2,3 0,57 0,848 5L STD 400,126 3,2 0,74 1,10 5L XS 80

1/2 0,840 21,3 0,109 2,8 0,85 1,26 5L STD 400,147 3,7 1,09 1,62 5L XS 800,188 4,8 1,31 1,95 5L 1600,294 7,5 1,71 2,54 5L XXS

3/4 1,050 26,7 0,113 2,9 1,13 1,68 5L STD 400,154 3,9 1,47 2,19 5L XS 800,219 5,6 1,94 2,88 5L 1600,308 7,8 2,44 3,63 5L XXS

1 1,315 33,4 0,133 3,4 1,68 2,50 5L STD 400,179 4,5 2,17 3,23 5L XS 800,250 6,4 2,84 4,23 5L 1600,358 9,1 3,66 5,45 5L XXS

1 1/4 1,660 42,2 0,140 3,6 2,27 3,38 5L STD 400,191 4,9 3,00 4,46 5L XS 800,250 6,4 3,76 5,60 5L 1600,382 9,7 5,21 7,75 5L XXS

1 1/2 1,900 48,3 0,145 3,7 2,72 4,05 5L STD 400,200 5,1 3,63 5,40 5L XS 800,281 7,1 4,86 7,23 5L 1600,400 10,2 6,41 9,54 5L XXS

2 2,375 60,3 0,083 2,1 2,03 3,02 5L, 5LX0,109 2,8 2,64 3,93 5L, 5LX0,126 3,2 3,00 4,47 5L, 5LX0,141 3,6 3,36 5,00 5L, 5LX0,154 3,9 3,65 5,44 5L, 5LX STD 400,172 4,4 4,05 6,03 5L, 5LX0,188 4,8 4,39 6,54 5L, 5LX0,218 5,5 5,02 7,48 5L, 5LX XS 800,250 6,4 5,67 8,45 5L, 5LX0,281 7,1 6,28 9,35 5L, 5LX0,344 8,7 7,46 11,10 1600,436 11,1 9,03 13,40 5L, 5LX XXS

2 1/2 2,875 73,0 0,083 2,1 2,47 3,68 5L, 5LX0,109 2,8 3,22 4,80 5L, 5LX0,125 3,2 3,67 5,46 5L, 5LX0,141 3,6 4,12 6,12 5L, 5LX0,156 4,0 4,53 6,75 5L, 5LX0,172 4,4 4,97 7,40 5L, 5LX0,188 4,8 5,40 8,04 5L, 5LX0,203 5,2 5,79 8,62 5L, 5LX STD0,216 5,5 6,13 9,13 5L, 5LX0,250 6,4 7,01 10,40 5L, 5LX0,276 7,0 7,66 11,40 5L, 5LX XS 800,375 9,5 10,00 14,90 1600,552 14,0 13,70 20,40 5L, 5LX XXS

3 3,500 88,9 0,083 2,1 3,03 4,51 5L, 5LX0,109 2,8 3,95 5,88 5L, 5LX0,125 3,2 4,57 6,72 5L, 5LX


ANSI B 36.10



0,141 3,6 5,06 7,54 5L, 5LX0,156 4,0 5,57 8,30 5L, 5LX0,172 4,4 6,11 9,10 5L, 5LX0,188 4,8 6,65 9,91 5L, 5LX0,216 5,5 7,58 11,3 5L, 5LX STD 400,250 6,4 8,68 12,9 5L, 5LX0,281 7,1 9,66 14,4 5L, 5LX0,300 7,6 10,30 15,3 5L, 5LX XS 800,438 11,1 14,30 21,3 1600,600 15,2 18,60 27,7 5L, 5LX XXS

3 1/2 4 101,6 0,083 2,1 3,47 5,17 5L, 5LX0,109 2,8 4,53 6,75 5L, 5LX0,125 3,2 5,17 7,70 5L, 5LX0,141 3,6 5,81 8,65 5L, 5LX0,156 4,0 6,40 9,53 5L, 5LX0,172 4,4 7,03 10,5 5L, 5LX0,188 4,8 7,65 11,4 5L, 5LX0,226 5,7 9,11 13,6 5L, 5LX STD 400,250 6,4 10,00 14,9 5L, 5LX0,281 7,1 11,20 16,6 5L, 5LX0,318 8,1 12,50 18,6 5L, 5LX XS 80

4 4,5 114,3 0,083 2,1 3,92 5,84 5L, 5LS, 5LX0,109 2,8 5,11 7,61 5L, 5LS0,125 3,2 5,84 8,70 5L, 5LS, 5LX0,141 3,6 6,56 9,77 5L, 5LS, 5LX0,156 4,0 7,24 10,8 5L, 5LS, 5LX0,172 4,4 7,95 11,8 5L, 5LS, 5LX0,188 4,8 8,66 12,9 5L, 5LS, 5LX0,203 5,2 9,32 13,9 5L, 5LS, 5LX0,219 5,6 10,00 14,9 5L, 5LS, 5LX0,237 6,0 10,80 16,1 5L, 5LS, 5LX STD 400,250 6,4 11,40 16,9 5L, 5LS, 5LX0,281 7,1 12,70 18,9 5L, 5LS, 5LX0,312 7,9 14,00 20,8 5L, 5LS, 5LX0,337 8,6 15,00 22,3 5L, 5LS, 5LX XS 800,438 11,1 19,00 28,3 5L, 5LS, 5LX 1200,531 13,5 22,50 33,5 5L, 5LS, 5LX 1600,674 17,1 27,50 41,0 5L, 5LS, 5LX XXS

5 5,563 141,3 0,083 2,1 4,86 7,24 5L, 5LS0,125 3,2 7,26 10,8 5L, 5LS0,156 4,0 9,01 13,4 5L, 5LS0,188 4,8 10,80 16,1 5L, 5LS0,219 5,6 12,50 18,6 5L, 5LS0,258 6,6 14,60 21,8 5L, 5LS STD 400,281 7,1 15,80 23,6 5L, 5LS0,312 7,9 17,50 26,1 5L, 5LS0,344 8,7 19,20 28,6 5L, 5LS0,375 9,5 20,80 31,0 5L XS 800,500 12,7 27,00 40,3 5L, 5LS 1200,625 15,9 33,00 49,1 5L, 5LS 1600,750 19,0 38,60 57,4 5L XXS

6 6,625 168,3 0,083 2,1 5,80 8,64 5L, 5LS, 5LX0,109 2,8 7,59 11,3 5L, 5LS, 5LX0,125 3,2 8,68 12,0 5L, 5LS, 5LX0,141 3,6 9,76 14,5 5L, 5LS, 5LX0,156 4,0 10,80 16,1 5L, 5LS, 5LX0,172 4,4 11,80 17,6 5L, 5LS, 5LX0,188 4,8 12,90 19,2 5L, 5LS, 5LX0,203 5,2 13,90 20,7 5L, 5LS, 5LX0,219 5,6 15,00 22,3 5L, 5LS, 5LX


ANSI B 36.10



0,250 6,4 17,0 25,40,280 7,1 19,0 28,30,312 7,9 21,0 31,3 5L, 5LS, 5LX0,344 8,7 23,1 34,4 5L, 5LS, 5LX STD 400,375 9,5 25,0 37,3 5L, 5LS, 5LX0,432 11,0 28,6 42,6 5L, 5LS, 5LX XS 800,500 12,7 32,7 48,7 5L, 5LS, 5LX0,562 14,3 36,4 54,2 5L, 5LS, 5LX 1200,625 15,9 40,0 59,6 5L, 5LS, 5LX0,719 18,3 45,4 67,6 5L, 5LS, 5LX 1600,864 21,9 53,2 79,2 5L XXS

8 8,625 219,1 0,125 3,2 11,4 19,9 5L, 5LS, 5LX0,156 4,0 14,1 21,0 5L, 5LS, 5LX0,188 4,8 16,9 25,2 5L, 5LS, 5LX0,203 5,2 18,3 27,3 5LS, 5LX0,219 5,6 19,7 29,3 5L, 5LS, 5LX0,250 6,4 22,4 33,3 5L, 5LS, 5LX 200,277 7,0 24,7 36,8 5L, 5LS, 5LX 300,312 7,9 27,7 41,3 5L, 5LS, 5LX0,322 8,2 28,6 42,5 5L, 5LS, 5LX STD 400,344 8,7 30,4 45,3 5L, 5LS, 5LX0,375 9,5 33,0 49,2 5L, 5LS, 5LX0,406 10,3 35,7 53,1 600,438 11,1 38,3 57,0 5L, 5LS, 5LX0,500 12,7 43,4 64,6 5L, 5LS, 5LX XS 800,562 14,3 48,4 72,1 5L, 5LS, 5LX0,594 15,1 50,9 75,8 1000,625 15,9 53,4 79,5 5L, 5LS, 5LX0,719 18,3 60,7 90,4 5L, 5LS, 5LX 1200,812 20,6 67,8 101,0 1400,875 22,6 72,4 108,0 5L, 5LS, 5LX XXS0,906 23,0 74,4 111,0 160

10 10,750 273 0,156 4,0 17,6 26,3 5L, 5LS, 5LX0,188 4,8 21,2 31,6 5L, 5LS, 5LX0,203 5,2 22,9 34,1 5L, 5LS, 5LX0,219 5,6 24,6 36,7 5L, 5LS, 5LX0,250 6,4 28,0 41,8 5L, 5LS, 5LX 200,279 7,1 31,2 46,5 5L, 5LS, 5LX0,307 7,8 34,2 51,0 5L, 5LS, 5LX 300,344 8,7 38,2 56,9 5L, 5LS, 5LX0,365 9,3 40,5 60,3 5L, 5LS, 5LX STD 400,438 11,1 48,2 71,8 5L, 5LS, 5LX0,500 12,7 54,7 81,5 5L, 5LS, 5LX XS 600,562 14,3 61,2 91,1 5L, 5LS, 5LX0,594 15,1 64,4 95,8 800,625 15,9 67,7 101,0 5L, 5LS, 5LX0,719 18,3 77,0 115,0 5L, 5LS, 5LX 1000,812 20,6 86,2 128,0 5L, 5LS0,844 21,4 89,3 133,0 1201,000 25,4 104,1 155,0 XXS 1401,125 28,6 115,6 172,0 160

12 12,750 323,8 0,172 4,4 23,1 34,4 5L, 5LS, 5LX0,188 4,8 25,2 37,6 5L, 5LS, 5LX0,203 5,2 27,2 40,5 5LS, 5LX0,219 5,6 29,3 43,7 5L, 5LS, 5LX0,250 6,4 33,4 49,7 5L, 5LS, 5LX 200,281 7,1 37,4 55,7 5L, 5LS, 5LX0,312 7,9 41,4 61,7 5L, 5LS, 5LX0,330 8,4 43,8 65,2 5L, 5LS, 5LX 300,344 8,7 45,6 67,9 5L, 5LS, 5LX


ANSI B 36.10



0,375 9,5 49,6 73,8 5L, 5LS, 5LX STD0,406 10,3 53,5 79,7 5LS, 5LX 400,438 11,1 57,6 85,8 5L, 5LS, 5LX0,500 12,7 65,4 97,4 5L, 5LS, 5LX XS0,562 14,3 73,1 109,0 5L, 5LS, 5LX 600,625 15,9 80,9 121,0 5L, 5LS, 5LX0,688 17,5 88,6 132,0 5L, 5LS, 5LX 800,750 19,0 96,1 143,0 5L, 5LS, 5LX0,812 20,6 104 154 5L, 5LS, 5LX0,844 21,4 107 160 1000,875 22,2 111 165 5L, 5LS, 5LX1,000 25,4 125 187 XXS 1201,125 28,6 140 208 1401,312 33,3 160 239 160

14 14,000 355,6 0,188 4,8 27,7 41,3 5L, 5LS, 5LX0,203 5,2 29,9 44,6 5L, 5LS0,210 5,3 30,9 46,1 5LS, 5LX0,219 5,6 32,2 48,0 5L, 5LS, 5LX0,250 6,4 36,7 54,7 5L, 5LS, 5LX 100,281 7,1 41,2 61,3 5L, 5LS, 5LX0,312 7,9 45,6 67,9 5L, 5LS, 5LX 200,344 8,7 50,2 74,7 5L, 5LS, 5LX0,375 9,5 54,6 81,3 5L, 5LS, 5LX STD 300,406 10,3 58,9 87,8 5LS, 5LX0,438 11,1 63,4 94,5 5L, 5LS, 5LX 400,469 11,9 67,8 101 5LS, 5LX0,500 12,7 72,1 107 5L, 5LS, 5LX XS0,562 14,3 80,7 120 5L, 5LS, 5LX0,594 15,1 85,0 127 600,625 15,9 89,3 133 5L, 5LS, 5LX0,688 17,5 97,8 146 5L, 5LS, 5LX0,750 19,0 106 158 5L, 5LS, 5LX 800,812 20,6 114 170 5L, 5LS, 5LX0,875 22,2 123 183 5L, 5LS, 5LX0,938 23,8 131 195 5L, 5LS, 5LX 1001,094 27,8 151 224 1201,250 31,8 170 253 1401,406 35,7 189 281 1602,000 50,8 256 3812,125 54,0 270 4012,200 55,9 277 4132,500 63,5 307 457

16 16,000 406,6 0,188 4,8 31,8 47,3 5L, 5LS, 5LX0,203 5,2 34,2 51,0 5L, 5LS, 5LX0,219 5,6 36,9 55,0 5L, 5LS, 5LX0,250 6,4 42,0 62,6 5L, 5LS, 5LX 100,281 7,1 47,2 70,3 5L, 5LS, 5LX0,312 7,9 52,3 77,9 5L, 5LS, 5LX 200,344 8,7 57,7 85,7 5L, 5LS, 5LX0,375 9,5 62,6 93,2 5L, 5LS, 5LX STD 300,406 10,3 67,6 101 5LS, 5LX0,438 11,1 72,8 108 5L, 5LS, 5LX0,469 11,9 77,8 116 5LS, 5LX0,500 12,7 82,8 123 5L, 5LS, 5LX XS 400,562 14,3 92,7 138 5L, 5LS, 5LX0,625 15,0 103 153 5L, 5LS, 5LX0,656 16,7 108 160 600,688 17,5 113 168 5L, 5LS, 5LX0,750 19,0 122 182 5L, 5LS, 5LX0,812 20,6 132 196 5L, 5LS, 5LX


ANSI B 36.10



0,844 21,4 137 203 800,875 22,2 141 211 5L, 5LS, 5LX0,938 23,8 151 225 5L, 5LS, 5LX1,000 25,4 160 239 5L, 5LS, 5LX1,031 26,2 165 245 1001,062 26,9 169 253 5L, 5LS, 5LX1,125 28,6 179 266 5L, 5LS, 5LX1,219 31,0 192 286 1201,438 36,5 224 333 1401,594 40,5 245 365 160

18 18,000 457,2 0,188 4,8 35,8 53,3 5L, 5LS, 5LX0,219 5,6 41,6 62,0 5L, 5LS, 5LX0,250 6,4 47,4 70,6 5L, 5LS, 5LX 100,281 7,1 53,2 79,2 5L, 5LS, 5LX0,312 7,9 58,9 87,8 5L, 5LS, 5LX 200,344 8,7 64,9 96,6 5L, 5LS, 5LX0,375 9,5 70,6 105 5L, 5LS, 5LX STD0,406 10,3 76,3 114 5LS, 5LX0,438 11,1 82,2 122 5L, 5LS, 5LX 300,469 11,9 87,8 131 5LS, 5LX0,500 12,7 93,4 139 5L, 5LS, 5LX XS0,562 14,3 105 156 5L, 5LS, 5LX 400,625 15,9 116 173 5L, 5LS, 5LX0,688 17,5 127 189 5L, 5LS, 5LX0,750 19,0 138 206 5L, 5LS, 5LX 600,812 20,6 149 222 5L, 5LS, 5LX0,875 22,2 160 238 5L, 5LS, 5LX0,938 23,8 171 255 5L, 5LS, 5LX 801,000 25,4 182 270 5L, 5LS, 5LX1,062 27,0 192 286 5L, 5LS, 5LX1,125 28,6 203 302 5L, 5LS, 5LX1,156 29,4 208 310 1001,187 30,8 213 317 5L, 5LS, 5LX1,250 31,8 224 333 5L, 5LS, 5LX1,375 34,9 244 363 1201,562 39,7 274 408 1401,781 45,2 309 459 160

20 20,000 508,0 0,219 5,6 46,3 68,9 5L, 5LS, 5LX0,250 6,4 52,7 78,5 5L, 5LS, 5LX 100,281 7,1 59,2 88,2 5L, 5LS, 5LX0,312 7,9 65,6 97,7 5L, 5LS, 5LX0,344 8,7 72,2 108 5L, 5LS, 5LX0,375 9,5 78,6 117 5L, 5LS, 5LX STD 200,406 10,3 85,0 127 5LS, 5LX0,438 11,1 91,5 136 5L, 5LS, 5LX0,469 11,9 97,8 146 5LS, 5LX0,500 12,7 104 155 5L, 5LS, 5LX XS 300,562 14,3 117 174 5L, 5LS, 5LX0,594 15,1 123 183 400,625 15,9 129 193 5L, 5LS, 5LX0,688 17,5 142 211 5L, 5LS, 5LX0,750 19,0 154 230 5L, 5LS, 5LX0,812 20,6 166 248 5L, 5LS, 5LX 600,875 22,2 179 266 5L, 5LS, 5LX0,938 23,8 191 284 5L, 5LS, 5LX1,000 25,4 203 302 5L, 5LS, 5LX1,031 26,2 209 311 801,062 27,0 215 320 5L, 5LS, 5LX1,125 28,6 227 338 5L, 5LS, 5LX1,187 30,2 238 355 5L, 5LS, 5LX1,250 31,8 250 372 5L, 5LS, 5LX


ANSI B 36.10



1,281 32,5 256 381 1001,312 33,3 262 390 5L, 5LS, 5LX1,375 34,9 274 407 5L, 5LS, 5LX1,500 38,1 296 441 1201,750 44,4 341 508 1401,969 50,0 379 564 160

22 22,000 559 0,219 5,6 50,9 75,9 5L, 5LS, 5LX0,250 6,4 58,1 86,5 5L, 5LS, 5LX 100,281 7,1 65,2 97,1 5L, 5LS, 5LX0,312 7,9 72,3 108 5L, 5LS, 5LX0,344 8,7 79,6 118 5L, 5LS, 5LX0,375 9,5 86,6 129 5L, 5LS, 5LX STD 200,406 10,3 93,6 139 5LS, 5LX0,438 11,1 101 150 5L, 5LS, 5LX0,469 11,9 108 161 5LS, 5LX0,500 12,7 115 171 5L, 5LS, 5LX XS 300,562 14,3 129 192 5L, 5LS, 5LX0,625 15,9 143 213 5L, 5LS, 5LX0,688 17,5 157 233 5L, 5LS, 5LX0,750 19,0 170 254 5L, 5LS, 5LX0,812 20,6 184 274 5L, 5LS, 5LX0,875 22,2 197 294 5L, 5LS, 5LX 600,938 23,8 211 314 5L, 5LS, 5LX1,000 25,4 224 334 5L, 5LS, 5LX1,062 27,0 237 354 5L, 5LS, 5LX1,125 28,6 251 374 5L, 5LS, 5LX 801,187 30,2 264 393 5L, 5LS, 5LX1,250 31,8 277 413 5L, 5LS, 5LX1,312 33,3 290 432 5L, 5LS, 5LX1,375 34,9 303 451 5L, 5LS, 5LX 1001,437 36,5 316 470 5L, 5LS, 5LX1,500 38,1 328 489 5L, 5LS, 5LX1,625 41,3 354 526 1201,875 47,6 403 600 1402,125 54,0 451 671 160

24 24,000 610 0,250 6,4 63,4 94,4 5L, 5LS, 5LX 100,281 7,1 71,2 106 5L, 5LS, 5LX0,312 7,9 78,9 118 5L, 5LS, 5LX0,344 8,7 86,9 129 5L, 5LS, 5LX0,375 9,5 94,6 141 5L, 5LS, 5LX STD 200,406 10,3 102 152 5LS, 5LX0,438 11,1 110 164 5L, 5LS, 5LX0,469 11,9 118 176 5LS, 5LX0,500 12,7 125 187 5L, 5LS, 5LX X S0,562 14,3 141 210 5L, 5LS, 5LX 300,625 15,9 156 232 5L, 5LS, 5LX0,688 17,5 171 255 5L, 5LS, 5LX 400,750 19,0 186 277 5L, 5LS, 5LX0,812 20,6 201 300 5L, 5LS, 5LX0,875 22,2 216 322 5L, 5LS, 5LX0,938 23,8 231 344 5L, 5LS, 5LX0,969 24,6 238 355 601,000 25,4 246 366 5L, 5LS, 5LX1,062 27,0 260 342 5L, 5LS, 5LX1,125 28,6 275 409 5L, 5LS, 5LX1,187 30,2 289 431 5L, 5LS, 5LX1,219 31,0 297 441 801,250 31,8 304 452 5L, 5LS, 5LX1,312 33,3 318 474 5L, 5LS, 5LX1,375 34,9 332 495 5L, 5LS, 5LX1,437 36,5 346 516 5L, 5LS, 5LX1,500 38,1 360 537 5L, 5LS, 5LX


ANSI B 36.10



1,531 38,9 367 547 1001,562 39,7 374 558 5L, 5LS, 5LX1,812 46,0 430 639 1202,062 52,4 483 719 1402,344 59,5 542 807 160

26 26,000 660 0,250 6,4 68,8 102 5L, 5LS, 5LX0,281 7,1 77,2 115 5L, 5LS, 5LX0,312 7,9 85,6 128 5L, 5LS, 5LX 100,344 8,7 94,3 140 5L, 5LS, 5LX0,375 9,5 103 153 5L, 5LS, 5LX STD0,406 10,3 111 165 5 LS,5 LX0,438 11,1 120 178 5L, 5LS, 5LX0,469 11,9 128 190 5 LS,5 Lh0,500 12,7 136 203 5L, 5LS, 5LX XS 200,562 14,3 153 227 5L, 5LS, 5LX0,625 15,9 169 252 5L, 5LS, 5LX0,688 17,5 186 277 5L, 5LS, 5LX0,750 19,0 202 301 5L, 5LS, 5LX0,812 20,6 218 325 5L, 5LS, 5LX0,875 22,2 235 350 5L, 5LS, 5LX0,938 23,8 251 374 5L, 5LS, 5LX1,000 25,4 267 398 5L, 5LS, 5LX

28 28,000 711 0,250 6,4 74,1 110 5L, 5LS, 5LX0,281 7,1 83,2 124 5L, 5LS, 5LX0,312 7,9 92,3 137 5L, 5LS, 5LX 100,344 8,7 102 151 5LS, 5LX0,375 9,5 111 165 5L, 5LS, 5LX STD0,406 10,3 120 178 5LS, 5LX0,438 11,1 129 192 5L, 5LS, 5LX0,469 11,9 138 205 5LS, 5LX0,500 12,7 147 219 5L, 5LS, 5LX XS 200,562 14,3 165 245 5L, 5LS, 5LX0,625 15,9 183 272 5L, 5LS, 5LX 300,688 17,5 201 299 5L, 5LS, 5LX0,750 19,0 218 325 5L, 5LS, 5LX0,812 20,6 236 351 5L, 5LS, 5LX0,875 22,2 253 378 5L, 5LS, 5LX0,938 23,8 271 404 5L, 5LS, 5LX1,000 25,4 288 430 5L, 5LS, 5LX

30 30,000 762 0,250 6,4 79,4 118 5L, 5LS, 5LX0,281 7,1 89,2 133 5L, 5LS, 5LX0,312 7,9 98,9 147 5L, 5LS, 5LX 100,344 8,7 109 162 5LS, 5LX0,375 9,5 119 177 5L, 5LS, 5LX STD0,406 10,3 128 191 5LS, 5LX0,438 11,1 138 206 5L, 5LS, 5LX0,469 11,9 148 220 5LS, 5LX0,500 12,7 158 235 5L, 5LS, 5LX XS 200,562 14,3 177 263 5L, 5LS, 5LX0,625 15,9 196 292 5L, 5LS, 5LX 300,688 17,5 215 321 5L, 5LS, 5LX0,750 19,0 234 349 5L, 5LS, 5LX0,812 20,6 253 377 5L, 5LS, 5LX0,875 22,2 272 405 5L, 5LS, 5LX0,938 23,8 291 434 5L, 5LS, 5LX1,000 25,4 310 461 5L, 5LS, 5LX

32 32,000 813 0,250 6,4 84,8 126 5L, 5LS, 5LX0,281 7,1 95,2 142 5L, 5LS, 5LX0,312 7,9 106 157 5L, 5LS, 5LX 10


ANSI B 36.10



0,344 8,7 116 173 5LS, 5LX0,375 9,5 127 189 5L, 5LS, 5LX STD0,406 10,3 137 204 5LS, 5LX0,438 11,1 148 220 5L, 5LS, 5LX0,469 11,9 158 235 5LS, 5LX0,500 12,7 168 251 5L, 5LS, 5LX XS 200,562 14,3 189 281 5L, 5LS, 5LX0,625 15,9 209 312 5L, 5LS, 5LX 300,688 17,5 230 343 5L, 5LS, 5LX 400,750 19,0 250 373 5L, 5LS, 5LX0,812 20,6 270 403 5L, 5LS, 5LX0,875 22,2 291 433 5L, 5LS, 5LX0,938 23,8 311 463 5L, 5LS, 5LX1,000 25,4 331 493 5L, 5LS, 5LX

34 34,000 864 0,250 6,4 90,1 134 5L, 5LS, 5LX0,281 7,1 101 151 5L, 5LS, 5LX0,312 7,9 112 167 5L, 5LS, 5LX 100,344 8,7 124 184 5LS, 5LX0,375 9,5 135 201 5L, 5LS, 5LX STD0,406 10,3 146 217 5LS, 5LX0,438 11,1 157 234 5L, 5LS, 5LX0,469 11,9 168 250 5LS, 5LX0,500 12,7 179 266 5L, 5LS, 5LX XS 200,562 14,3 201 299 5L, 5LS, 5LX0,625 15,9 223 332 5L, 5LS, 5LX 300,688 17,5 245 365 5L, 5LS, 5LX 400,750 19,0 266 397 5L, 5LS, 5LX0,812 20,6 288 429 5L, 5LS, 5LX0,875 22,2 310 461 5L, 5LS, 5LX0,938 23,8 331 493 5L, 5LS, 5LX1,000 25,4 352 525 5L, 5LS, 5LX

36 36,000 914 0,250 6,4 95,4 142 5L, 5LS, 5LX0,281 7,1 107 160 5L, 5LS, 5LX0,312 7,9 119 177 5L, 5LS, 5LX 100,344 8,7 131 195 5LS, 5LX0,375 9,5 143 213 5L, 5LS, 5LX STD0,406 10,3 154 230 5LS, 5LX0,438 11,1 166 248 5L, 5LS, 5LX0,469 11,9 178 265 5LS, 5LX0,500 12,7 190 282 5L, 5LS, 5LX XS 200,562 14,3 213 317 5L, 5LS, 5LX0,625 15,9 236 352 5L, 5LS, 5LX 300,688 17,5 259 386 5L, 5LS, 5LX0,750 19,0 282 421 5L, 5LS, 5LX 400,812 20,6 305 455 5L, 5LS, 5LX0,875 22,2 328 489 5L, 5LS, 5LX0,938 23,8 351 523 5L, 5LS, 5LX1,000 25,4 374 557 5L, 5LS, 5LX

38 38,000 965 0,312 7,9 126 187 5L, 5LS, 5LX0,344 8,7 138 206 5L, 5LS, 5LX0,375 9,5 151 224 5L, 5LS, 5LX0,406 10,3 163 243 5L, 5LS, 5LX0,438 11,1 176 262 5L, 5LS, 5LX0,469 11,9 188 280 5L, 5LS, 5LX0,500 12,7 200 298 5L, 5LS, 5LX0,562 14,3 225 335 5L, 5LS, 5LX0,625 15,9 249 372 5L, 5LS, 5LX0,688 17,5 274 408 5L, 5LS, 5LX0,750 19,0 298 444 5L, 5LS, 5LX0,812 20,6 322 480 5L, 5LS, 5LX


ANSI B 36.10



0,875 22,2 347 517 5L, 5LS, 5LX0,938 23,8 371 553 5L, 5LS, 5LX1,000 25,4 395 589 5L, 5LS, 5LX

40 40,000 1016 0,312 7,9 132 197 5L, 5LS, 5LX0,344 8,7 146 217 5L, 5LS, 5LX0,375 9,5 159 236 5L, 5LS, 5LX0,406 10,3 172 256 5L, 5LS, 5LX0,438 11,1 185 276 5L, 5LS, 5LX0,469 11,9 198 295 5L, 5LS, 5LX0,500 12,7 211 314 5L, 5LS, 5LX0,562 14,3 237 353 5L, 5LS, 5LX0,625 15,9 263 391 5L, 5LS, 5LX0,688 17,5 289 430 5L, 5LS, 5LX0,050 19,0 314 468 5L, 5LS, 5LX0,812 20,6 340 506 5L, 5LS, 5LX0,875 22,2 366 545 5L, 5LS, 5LX0,938 23,8 391 583 5L, 5LS, 5LX1,000 25,4 417 620 5L, 5LS, 5LX

42 42,000 1067 0,344 8,7 153 228 5L, 5LS, 5LX0,375 9,5 167 248 5L, 5LS, 5LX0,406 10,3 180 269 5L, 5LS, 5LX0,438 11,1 194 290 5L, 5LS, 5LX0,460 11,9 208 310 5L, 5LS, 5LX0,500 12,7 222 330 5L, 5LS, 5LX0,562 14,3 249 370 5L, 5LS, 5LX0,625 15,9 276 411 5L, 5LS, 5LX0,688 17,5 304 452 5L, 5LS, 5LX0,750 19,0 330 492 5L, 5LS, 5LX0,812 20,6 357 532 5L, 5LS, 5LX0,875 22,2 384 572 5L, 5LS, 5LX0,938 23,8 411 615 5L, 5LS, 5LX1,000 25,4 438 652 5L, 5LS, 5LX




ANSI B 36.10





Seamless tubes - sizes and weightsDIN 2448

O.D.mm

Standard Wallthickness

mm

weight

kg/m

other weights in mm

Gewicht kg/m

2 2,3 2,6 2,9 3,2 3,6 4 4,5 5 5,6 6,3 7,1 8 8,8 10 11 12,5 14,2 16

10,29*)13,5*)1617,2*)20

21,3*)2526,9*)3031,8

33,7*)3842,4*)44,548,3*)

51(54)5760,3*)63,570

76,1*)82,588,9*)(95)101,6*)108

114,3*)(121)127133139,7*)

(146)152,4159165,1168,3*)(171)177,8

(191)193,7*)(216)219,1*)(241)244,5*)267

273*)(292)298,5(318)323,9*)(343)355,6*)

368(394)406,4*)419(445)457,2(470)

(495)508*)(521)(546)558,8(572)609,6(622)660,4

1,61,81,81,82

222,32,62,6

2,62,62,62,62,6

2,62,62,92,92,92,9

2,93,23,23,63,63,6

3,64444

4,54,54,54,54,54,55

5,45,465,96,36,36,3

6,377,17,57,188

898,8

10101010,5

111111,51212,512,512,51314,2

0,3440,5220,6320,6880,890

0,9621,131,411,771,88

2,012,292,572,702,95

3,123,303,904,144,364,83

5,286,316,818,118,769,33

9,9011,512,212,813,5

15,716,417,117,818,118,521,3

24,725,031,131,036,537,140,6

41,649,251,157,455,666,168,3

70,885,585,9

101107110119

131135144158170172185195227

0,4100,5710,6920,754

0,4540,6390,7780,8501,01

1,091,29

0,4930,7030,8600,9421,12

1,211,441,57

0,5250,7620,9381,031,22

1,331,581,731,962,08

2,222,532,842,993,27

3,463,65

0,5550,8171,011,111,33

1,441,721,892,142,27

2,422,773,113,283,59

3,794,014,284,544,795,30

5,80

0,5880,8831,101,211,46

1,591,902,092,372,52

2,693,083,473,654,00

4,234,474,785,075,365,93

6,497,057,63

0,6140,9401,181,311,58

1,722,072,282,592,76

2,953,383,814,024,41

4,664,935,275,595,916,55

7,177,808,438,989,7010,3

11,0

0,9961,271,411,71

1,872,282,482,833,02

3,233,714,194,424,85

5,135,495,816,176,527,24

7,928,639,3310,010,711,4

12,112,913,514,214,9

1,051,361,501,85

2,012,472,703,083,30

3,544,074,614,875,34

5,676,046,416,827,218,01

8,779,5610,311,111,912,7

13,514,315,015,816,6

17,418,219,019,720,120,5

1,431,601,98

2,172,682,943,373,60

3,874,475,075,355,89

6,246,687,087,537,978,85

9,7110,611,512,313,214,1

15,015,916,717,618,5

19,420,221,121,922,422,823,7

1,511,702,13

2,342,913,213,703,97

4,274,955,625,956,55

6,957,417,918,428,919,92

10,911,912,913,814,915,8

16,817,818,819,820,8

21,722,823,824,825,325,626,7

28,729,232,633,2

2,26

2,493,133,484,034,33

4,675,436,196,567,24

7,698,218,779,349,9011,0

12,113,214,415,416,617,7

18,819,921,022,123,3

24,325,526,627,728,328,730,0

32,232,836,637,241,041,745,6

46,7

2,36

2,623,353,724,344,68

5,055,916,767,177,93

8,439,089,6510,310,912,2

13,414,615,917,218,419,6

20,922,323,424,625,9

27,228,429,630,931,532,233,4

36,136,541,041,546,046,550,9

52,126,057,161,262,1

2,43

2,713,523,924,594,97

5,396,337,277,728,56

9,109,8110,411,111,813,2

14,614,917,318,720,121,4

22,824,325,526,928,3

29,831,032,433,834,535,236,5

39,540,045,045,450,450,955,8

57,161,562,667,168,172,574,9

77,7

Sizes not enclosed within the bold lines are not covered by DIN 2448.

* Up to 139.7 mm incl., these outside diameters are in conformity with threaded pipe to ISO Recommendation R7, from168.3 mm in conformity with ANSI B 2.1, API Std 5A, 5L or 5LX (without threads).

3,704,174,935,37

5,846,917,998,519,45

10,110,911,612,413,214,8

16,317,919,521,022,624,2

25,727,428,930,332,0

33,535,136,738,239,039,741,5

44,645,350,851,657,057,863,4

64,969,571,176,077,482,185,2

88,394,797,8

6,177,368,549,1110,2

10,911,712,513,414,316,0

17,719,521,222,824,726,4

28,129,831,633,335,1

36,638,540,342,042,943,445,4

48,849,855,656,762,463,669,7

71,476,278,383,385,390,193,9

97,3104108111118122

7,909,259,9011,1

11,912,813,814,815,817,8

19,721,723,725,427,629,6

31,633,435,537,439,5

41,243,445,447,448,448,951,3

55,056,262,764,170,472,079,0

80,986,288,894,296,7102107

110118122126133138141

149154

9,8810,611,9

12,913,915,016,217,319,6

21,724,026,228,330,732,9

35,137,439,641,844,0

46,248,550,853,054,154,957,4

61,963,070,771,979,480,888,7

90,997,399,8106109115120

124139138142151156160

168173177186191195209213

12,7

13,715,016,217,418,721,2

23,726,228,731,233,736,2

38,641,443,646,148,6

51,353,656,258,659,961,263,6

69,169,878,979,888,889,898,6

101109111119121129133

138149153158169173179

189193199209213219233239253

Seamless boiler tubesDIN 17175/2448St 35.8 I (P 235 G1 TH)ST 35.8 III15 Mo 313 Cr Mo 4410 Cr Mo 910

TPS TUBE & PIPE SIZES 171) Sizes given in parentheses are complementary sizes.2) Usually, standard sizes are available from stock. In general, seamless tubing and pipe are only manufactured in those sizes for

which weights are indicated. Other sizes upon request. English units are conversions of the metric ones. 3) Minimum wall thickness see DIN 2440.

Seamless tubes - sizes and weightsDIN 2448

18,519,822,6

25,328,030,833,436,239,0

41,744,747,249,952,7

55,558,160,963,665,066,269,1

74,975,985,786,996,597,8107

110118121130132140146

151162168173184189195

206211217228233239255261277

27,730,834,037,040,243,4

46,549,852,855,759,0

62,165,368,671,673,174,577,8

84,385,796,798,2109111122

125134137147150159166

172184191197210216222

234241247259266272291297316

33,036,539,943,547,0

50,454,157,460,864,3

67,871,374,878,280,081,585,2

92,493,9106108120122134

137148151162165176183

189204210217231238245

259266273287294301322328349

35,639,643,247,551,4

55,359,263,267,171,1

74,679,083,086,988,990,994,8

102105118120133136150

154165170181186196203

213228237245259268274

290300306321331337363368395

46,350,855,2

59,564,268,372,577,0

81,585,890,394,596,798,7103

113114130132147149165

169182187200204218226

235253261270288296305

323331340358366376401410436

57,6

62,367,371,776,381,1

85,890,595,399,9102104109

119121138140156159175

180194198213217232241

250269278288307316326

344353363382391401428438466

64,970,274,979,885,0

90,095100105108110115

125128145148165168185

190205210226230245255

265286295305326335346

365375386406416426456466496

80,886,392,1

97,7103109115117120126

138140160163182185205

211227233250256273284

295318329340363374385

408419431453464476509520555

91,898,2

105111117123126129136

149151174176198201223

229249255274280299311

323349361373400411424

449461474499511525561574611

105

112119126133137140147

162165190193218221246

253274281303309331344

358387401415444457472

499513528556570585626640682

134142146149158

174177205208236240267

275298306330338361377

392424439455487502518

549565581612627644690705753

141149154157167

184188218223252257287

296322330357365391408

425460477494529546563

597615632666684701753769822

268273306

315343353382390419437

456494512531570587607

644662682719737758813832888

282288323

333364374406415446466

486527547567609629649

689710731771791813873893954

295301340

350383394428438471493

514559580602647668691

7347567798228438679319531019

355

366401413449460496519

542590613636684707731

77780182587189491998810121082

368

381418431469481519544

568620644669720744769

819844870919944971104410691145

381

394434447488500541567

593648673700755780807

8598869149669931021109911261206

448462505519561589

617675702730788815843

899927957101210401070115311811265

630

661725755786851881912

97410061038110011311164125612871381

804838909942977

104510801115118312181253135513891493

8478859629981036

111011481187126112981337144914851599

O.D.mm

other weights in mm

Gewicht kg/m

17,5 20 22,2 25 28 30 32 36 40 45 50 55 60 65 70 75 80 85 90 100 110 120

10,29*)13,5*)1617,2*)20

21,3*)2526,9*)3031,8

33,7*)3842,4*)44,548,3*)

51(54)5760,3*)63,570

76,1*)82,588,9*)(95)101,6*)108

114,3*)(121)127133139,7*)

(146)152,4159165,1168,3*)(171)177,8

(191)193,7*)(216)219,1*)(241)244,5*)267

273*)(292)298,5(318)323,9*)(343)355,6*)

368(394)406,4*)419(445)457,2(470)

(495)508*)(521)(546)558,8(572)609,6(622)660,4

This marked size range acc.

DIN 2448


DIN 2458 Welded Steel Tubing and Pipe - sizes and weights

Outside Standard Weight

Diameter Wall Thickness

mm mm in. kg/m

10,2*) 1,6 0,064 0,34413,5*) 1,8 0,072 0,522

16 1,8 0,072 0,63217,2*) 1,8 0,072 0,68821,3*) 2 0,080 0,962

25 2 0,080 1,1326,9*) 2 0,080 1,24

30 2 0,080 1,3931,8 2 0,080 1,48

33,7*) 2 0,080 1,57

38 2 0,080 1,7942,4*) 2 0,080 2,0144,5 2 0,080 2,11

48,3*) 2,3 0,092 2,6351 2,3 0,092 2,78

57 2,3 0,092 3,1360,3*) 2,3 0,092 3,3163,5 2,3 0,092 3,5070 2,6 0,104 4,35

76,1*) 2,6 0,104 4,75

88,9*) 2,9 0,116 6,20101,6*) 2,9 0,116 7,11

108 2,9 0,116 7,57114,3*) 3,2 0,128 8,83

127 3,2 0,128 9,84

133 3,6 0,144 11,6139,7*) 3,6 0,144 12,2152,4 4 0,160 14,7159 4 0,160 15,4

165,1 4 0,160 16,0

168,3*) 4 0,160 16,3219,1*) 4,5 0,176 23,7273*) 5 0,192 33,0

323,9*) 5,6 0,219 43,8355,6*) 5,6 0,219 48,2

406,4*) 6,3 0,250 62,4419 6,3 0,250 64,3

457,2 6,3 0,250 70,3508*) 6,3 0,250 78,2559 6,3 0,250 86,1

610*) 6,3 0,250 94,1660 7,1 0,281 115

711*) 7,1 0,281 124762 8 0,312 148

813*) 8 0,312 158

864 8,8 0,344 185914*) 10 0,394 2231016*) 10 0,394 2481120 11 0,438 3021220 12,5 0,500 375

1320 12,5 0,500 4061420 14,2 0,562 4931520 14,2 0,562 5281620 16 0,625 6301720 17,5 0,688 734

1820 17,5 0,688 7771920 20 0,787 9372020 20 0,787 986

Sizes not enclosed within the bold lines are not covered by DIN 2458.* Up to 139.7 mm incl., these outside diameters are in conformity with threaded pipe to ISO

Recommendation R 7; from 168.3 mm in conformity with threaded pipe to ANSI B 2.1, API Stds 5A,5L and 5LX (without threads).

Other Wall Thicknesses mm/in.

1,8 2 2,3 2,6 2,9 3,2 3,6 4 4,5 5 5,6 6,3

0,072 0,080 0,092 0,104 0,116 0,128 0,144 0,160 0,176 0,192 0,219 0,250

Weight kg/m

0,378 0,410 0,454 0,493 0,5250,522 0,571 0,639 0,703 0,7620,632 0,692 0,778 0,860 0,938 1,01 1,100,688 0,754 0,850 0,942 1,03 1,11 1,210,874 0,962 1,09 1,21 1,33 1,44 1,59 1,72 1,87

1,03 1,13 1,29 1,44 1,58 1,72 1,90 2,07 2,281,12 1,24 1,41 1,57 1,73 1,89 2,09 2,28 2,48 2,70

1,39 1,59 1,77 1,96 2,14 2,37 2,59 2,83 3,081,48 1,68 1,88 2,08 2,27 2,52 2,76 3,02 3,301,57 1,79 2,01 2,22 2,42 2,69 2,95 3,23 3,54

1,79 2,04 2,29 2,53 2,77 3,08 3,38 3,71 4,072,01 2,29 2,57 2,84 3,11 3,47 3,81 4,19 4,61 5,072,11 2,41 2,70 2,99 3,28 3,65 4,02 4,42 4,87 5,352,30 2,63 2,95 3,27 3,59 4,00 4,41 4,85 5,34 5,892,43 2,78 3,12 3,46 3,79 4,23 4,66 5,13 5,67 6,24

3,13 3,52 3,90 4,28 4,78 5,27 5,81 6,41 7,083,31 3,73 4,14 4,54 5,07 5,59 6,17 6,82 7,533,50 3,93 4,36 4,79 5,36 5,91 6,52 7,21 7,973,86 4,35 4,83 5,30 5,93 6,55 7,24 8,01 8,85 9,924,22 4,75 5,28 5,80 6,49 7,17 7,92 8,77 9,71 10,9

5,57 6,20 6,81 7,63 8,43 9,33 10,3 11,5 12,97,11 7,82 8,76 9,70 10,7 11,9 13,2 14,9

8,33 9,33 10,3 11,4 12,7 14,1 15,88,83 9,90 11,0 12,1 13,5 15,0 16,89,84 11,0 12,2 13,5 15,0 16,7 18,8

10,3 11,6 12,8 14,2 15,8 17,6 19,810,9 12,2 13,5 14,9 16,6 18,5 20,811,9 13,3 14,7 16,4 18,2 20,2 22,812,4 13,9 15,4 17,1 19,0 21,1 23,812,9 14,4 16,0 17,8 19,7 21,9 24,8

13,1 14,7 16,3 18,1 20,1 22,4 25,317,2 19,3 21,4 23,7 26,4 29,4 33,221,5 24,1 26,7 29,7 33,0 36,8 41,6

28,6 31,8 35,3 39,3 43,8 49,534,9 38,8 43,2 48,2 54,5

44,4 49,5 55,1 62,445,8 51,0 56,9 64,3

55,8 62,1 70,362,0 69,1 78,268,3 76,1 86,1

83,1 94,1102110118126

134142157174


DIN 2458 Welded Steel Tubing and Pipe (Extract from ISO Recommendation R 336)

Other Wall Thicknesses mm/in.

7,18 8,8 10 11 12,5 14,2 16 17,5 20 22,2 25

0,281 0,312 0,344 0,394 0,438 0,500 0,562 0,625 0,688 0,787 0,875 1

Weight kg/m

18,821,0

22,123,325,526,6 29,627,7 30,9

28,3 31,537,2 41,5 45,4 51,6 56,7 64,146,7 52,1 57,1 64,9 71,4 80,955,6 62,1 68,1 77,4 85,3 96,761,2 68,3 74,9 85,2 93,9 107

70,1 78,3 85,9 97,8 108 12272,3 80,7 88,7 101 111 12679,0 88,2 96,9 110 122 13887,9 98,2 108 123 135 15496,9 108 119 135 149 170 191 213 233 266

106 118 130 148 163 185 209 233 255 291115 128 141 160 177 201 227 253 277 315 349 395124 138 152 173 191 217 245 273 299 341 377 426133 148 163 185 205 233 263 293 321 366 405 458141 158 174 198 219 249 280 313 343 391 433 489

150 168 185 211 232 264 298 333 365 416 461 521159 178 196 223 246 280 316 353 386 441 489 552177 198 218 248 274 312 352 393 430 491 544 615195 218 240 274 302 344 388 434 475 542 601 680213 238 262 298 330 375 423 473 518 591 656 742

230 258 284 323 357 406 458 512 562 641 711 805277 305 348 384 437 493 552 605 690 765 866297 327 372 411 468 528 591 647 739 820 928316 348 397 439 499 564 630 691 789 875 991

370 422 466 530 599 669 734 838 929 1053

392 446 493 562 634 709 777 887 985 1115471 521 592 669 748 820 937 1039 1177496 548 623 704 787 863 986 1094 1239

Suited for

Outside Diameter pipe threads2)

mm in. to DIN 259

and DIN 2999

10,2*) 0,402 R 1/8”13,5*) 0,531 R 1/4”16 0,63017,2*) 0,677 R 3/8”21,3*) 0,840 R 1/2”

25 -26,9*) 1,059 R 3/4”30 1,18131,8 1,25033,7*) 1,327 R 1”

38 1,50042,4*) 1,669 R 11/4”44,5 1,75048,3*) 1,900 R 11/2”51 2

57 2,25060,3*) 2,375 R 2”

70 2,75076,1*) 3 R 21/2”

88,9*) 3,500 R 3”101,6*) 4108 4,250114,3*) 4,500 R 4”127 5

133 5,250139,7*) 5,500 R 5”152,4 6159 6,250165,1 6,500 R 6”

168,3*) 6,625219,1*) 8,625273,0*) 10,750323,9*) 12,750355,6*) 14

406,4*) 16419 16,500457,2 18508,0*) 20559 22

610,0*) 24660,0 26711,0*) 28762,0 30813,0*) 32

864 34914,0*) 36

1016,0*) 401120 44,11220 48

1320 521420 55,91520 59,81620 63,81720 67,7

1820 71,71920 75,62020 79,5

1) Usually, standard sizes are available from stock. In general, welded tubing and pipe are only manufactured in those sizes forwhich weights are indicated. Other sizes upon request. English units are conversions of the metric ones.

2) Minimum wall thickness see DIN 2440.


JIS Japan Sizes combinedG 3456/3458/3460/3454

NOMINAL Schedule 10 Schedule 20PIPE OUTSIDESIZE DIAMETER Wall Thickness Approx. Weight Wall Thickness Approx. Weight Wall

in in mm in mm lbs/ft kg/m in mm lbs/ft kg/m in

1/8 0,413 10,5 - - - - - - - - -1/4 0,543 13,8 - - - - - - - - -3/8 0,681 17,3 - - - - - - - - -1/2 0,854 21,7 - - - - - - - - -3/4 1,07 27,2 - - - - - - - - -1 1,34 34,0 - - - - - - - - -

11/4 1,68 42,7 - - - - - - - - -11/2 1,91 48,6 - - - - - - - - -

2 2,38 60,5 - - - - 0,126 3,2 3,039 4,52 -21/2 3,00 76,3 - - - - 0,177 4,5 5,360 7,97 -

3 3,51 89,1 - - - - 0,177 4,5 6,315 9,39 -31/2 4,00 101,6 - - - - 0,177 4,5 7,263 10,8 -

4 4,50 114,3 - - - - 0,193 4,9 8,877 13,2 -5 5,50 139,8 - - - - 0,201 5,1 11,37 16,9 -6 6,50 165,2 - - - - 0,217 5,5 14,59 21,7 -8 8,52 216,3 - - - - 0,252 6,4 22,2 33,1 0,27610 10,53 267,4 - - - - 0,252 6,4 27,7 41,2 0,30712 12,54 318,5 - - - - 0,252 6,4 33,1 49,3 0,33114 14,00 355,6 0,252 6,4 37,0 55,1 0,311 7,9 45,5 67,7 0,37416 16,00 406,4 0,252 6,4 42,4 63,1 0,311 7,9 52,2 77,6 0,37418 18,00 457,2 0,252 6,4 48,2 71,7 0,311 7,9 58,8 87,5 0,43720 20,00 508,0 0,252 6,4 53,3 79,2 0,374 9,5 78,7 117 0,500

NOMINAL Schedule 80 Schedule 100PIPE OUTSIDESIZE DIAMETER Wall Thickness Approx. Weight Wall Thickness Approx. Weight Wall

in in mm in mm lbs/ft kg/m in mm lbs/ft kg/m in

1/8 0,413 10,5 0,094 2,4 0,322 0,479 - - - - -1/4 0,543 13,8 0,118 3,0 0,537 0,799 - - - - -3/8 0,681 17,3 0,126 3,2 0,746 1,11 - - - - -1/2 0,854 21,7 0,146 3,7 1,10 1,64 - - - - -3/4 1,07 27,2 0,153 3,9 1,51 2,24 - - - - -1 1,34 34,0 0,177 4,5 2,20 3,27 - - - - -

11/4 1,68 42,7 0,193 4,9 3,07 4,57 - - - - -

11/2 1,91 48,6 0,201 5,1 3,68 5,47 - - - - -2 2,38 60,5 0,216 5,5 5,02 7,46 - - - - -

21/2 3,00 76,3 0,276 7,0 8,07 12,0 - - - - -3 3,51 89,1 0,299 7,6 10,3 15,3 - - - - -

31/2 4,00 101,6 0,319 8,1 12,6 18,7 - - - - -4 4,50 114,3 0,338 8,6 15,1 22,4 - - - - 0,4375 5,50 139,8 0,374 9,5 20,5 30,5 - - - - 0,5006 6,50 165,2 0,433 11,0 28,1 41,8 - - - - 0,5638 8,52 216,3 0,500 12,7 42,9 63,8 0,594 15,1 50,4 74,6 0,71610 10,53 267,4 0,594 15,1 63,1 93,9 0,716 18,2 75,3 112 0,84212 12,54 318,5 0,685 17,4 86,7 129,0 0,842 21,4 105,6 157 1,00014 14,00 355,6 0,748 19,0 106,2 158,0 0,937 23,8 131,1 195 1,09416 I6,00 406,4 0,842 21,4 136,5 203,0 1,031 26,2 165,4 246 1,21618 18,00 457,2 0,937 23,8 170,8 254,0 1,157 29,4 208,5 310 1,37420 20,00 508,0 1,031 26,2 209,1 311,0 1,279 32,5 256,2 381 1,500


JIS Japan Sizes combinedG 3456/3458/3460/3454

Schedule 30 Schedule 40 Schedule 60

Thickness Approx. Weight Wall Thickness Approx. Thickness Wall Thickness Approx. Thicknessmm Ibs/ft kg/m in mm Ibs/ft kg/m in mm Ibs/ft kg/m

- - - 0,067 1,7 0,248 0,369 0,087 2,2 0,303 0,450- - - 0,087 2,2 0,423 0,629 0,094 2,4 0,454 0,675- - - 0,091 2,3 0,572 0,851 0,110 2,8 0,673 1,00- - - 0,110 2,8 0,881 1,31 0,126 3,2 0,982 1,42- - - 0,114 2,9 1,17 1,74 0,134 3,4 1,35 2,00- - - 0,134 3,4 1,73 2,57 0,153 3,9 1,94 2,89- - - 0,142 3,6 2,33 3,47 0,177 4,5 2,85 4,24- - - 0,146 3,7 2,76 4,10 0,177 4,5 3,29 4,89- - - 0,153 3,9 3,66 5,44 0,193 4,9 4,52 6,72- - - 0,205 5,2 6,13 9,12 0,236 6,0 6,99 10,4- - - 0,216 5,5 7,60 11,3 0,260 6,6 9,01 13,4- - - 0,224 5,7 9,08 13,5 0,276 7,0 11,0 16,3- - - 0,236 6,0 10,8 16,0 0,279 7,1 12,6 18,8- - - 0,260 6,6 14,6 21,7 0,319 8,1 17,7 26,3- - - 0,279 7,1 18,6 27,7 0,366 9,3 24,1 35,87,0 24,3 36,1 0,323 8,2 28,3 42,1 0,406 10,3 35,2 52,37,8 33,5 49,9 0,366 9,3 39,8 59,2 0,500 12,7 53,7 79,88,4 43,2 64,2 0,405 10,3 52,7 78,3 0,563 14,3 71,9 107,09,5 54,5 81,1 0,437 11,1 63,4 94,3 0,594 15,1 85,4 127,09,5 62,5 63,0 0,500 12,7 82,7 123,0 0,657 16,7 107,6 160,011,1 82,0 122,0 0,563 14,3 104,9 156,0 0,748 19,0 137,9 205,012,7 104,2 155,0 0,594 15,1 123,7 184,0 0,811 20,6 166,8 248,0

Schedule 120 Schedule 140 Schedule 160

Thickness Approx. Weight Wall Thickness Approx. Thickness Wall Thickness Approx. Thicknessmm Ibs/ft kg/m in mm Ibs/ft kg/m in mm Ibs/ft kg/m

- - - - - - - - - - -- - - - - - - - - - -- - - - - - - - - - -- - - - - - - 0,185 4,7 1,32 1,97- - - - - - - 0,216 5,5 1,98 2,94- - - - - - - 0,252 6,4 2,93 4,36- - - - - - - 0,252 6,4 3,85 5,73- - - - - - - 0,279 7,1 4,89 7,27- - - - - - - 0,342 8,7 7,46 11,1- - - - - - - 0,374 9,5 10,4 15,6- - - - - - - 0,437 11,1 14,4 21,4- - - - - - - 0,500 12,7 18,7 27,811,1 19,0 28,2 - - - - 0,531 13,5 22,6 33,612,7 26,8 39,8 - - - - 0,626 15,9 32,7 48,614,3 35,8 53,2 - - - - 0,716 18,2 44,4 66,018,2 59,8 88,9 0,811 20,6 66,8 99,4 0,905 23,0 74,0 110,021,4 87,4 130,0 1,000 25,4 102,2 152,0 1,126 28,6 113,0 168,025,4 123,7 184,0 1,126 28,6 137,2 204,0 1,311 33,3 157,4 234,027,8 151,3 225,0 1,252 31,8 170,8 254,0 1,405 35,7 189,6 282,030,9 192,3 286,0 1,437 36,5 223,9 333,0 1,594 40,5 245,5 365,034,9 244,1 363,0 1,563 39,7 275,0 409,0 1,779 45,2 308,7 459,038,1 296,6 441,0 0,748 44,4 341,6 508,0 1,968 50,0 380,0 565,0


@www.TPS-Technitube.de

[email protected]

we connect...


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Nominal Schedule Schedule Schedule Schedule Schedule Schedule Standard Schedule Schedule Schedule Extra Schedule Schedule Schedule Schedule Schedule Double

pipe 5S* 10S* 10 20 30 40S* wall 40 60 80S* strong 80 100 120 140 160 extra

size strong

in

1/8 - 0.28 - - - 0.36 0.36 0.36 - 0.46 0.46 0,46 - - - - -

1/4 - 0.49 - - - 0.63 0.63 0.63 - 0.80 0.80 0.80 - - - - -

3/8 - 0.63 - - - 0.85 0.85 0.85 - 1.10 1.10 1.10 - - - - -

1/2 0.80 1.00 - - - 1.26 1.26 1.26 - 1.62 1.62 1.62 - - - 1.95 2.54+

3/4 1.03 1.28 - - - 1.68 1.68 1.68 - 2.19 2.19 2.19 - - - 2.89 3.63+

1 1.32 2.08 - - - 2.50 2.50 2.50 - 3.23 3.23 3.23 - - - 4.23 5.45+

*1 1/4 1.65 2.69 - - - 3.38 3.38 3.38 - 4.46 4.46 4.46 - - - 5.60 7.75+*1 1/2 1.90 3.11 - - - 4.05 4.05 4.05 - 5.40 5.40 5.40 - - - 7.23 9.54+

2 2.40 3.93 - - - 5.43 5.43 5.43 - 7.47 7.47 7.47 - - - 11.10 13.44+

*2 1/2 3.69 5.25 - - - 8.62 8.62 8.62 - 11.40 11.40 11.40 - - - 14.90 20.39+*3 4.51 6.44 - - - 11.28 11.28 11.28 - 15.25 15.25 15.25 - - - 21.30 27.65

3 1/2 5.18 7.40 - - - 13.56 13.56 13.56 - 18.62 18.62 18.62 - - - - -

4 5.83 8.35 - - - 16.06 16.06 15.06 - 22.30 22.30 22.30 - 28.25 - 33.51 40.99+

*5 9.46 11.56 - - - 21.76 21.76 21.76 - 30.92 30.92 30.92 - 40.24 - 49.05 57.38+*6 11.31 13.83 - - - 28.23 28.23 28.23 - 42.52 42.52 42.52 - 54.20 - 67.47 79.11+

8 14.78 19.94 - 33.28 36.76 42.49 42.49 42.49 53.07 64.57 64.57 64.57 75.79 90.32 100.89 111.18 107.78+

10 22.67 27.83 - 41.73 50.96 60.24 60.24 60.24 81.46 81.46 81.46 95.84 114.59 132.85 154.97 172.11 154.96

12 33.08 36.01 - 49.68 65.14 73.76 73.76 79.71 108.97 97.36 97.36+ 131.81 159.67 186.75 207.87 238.60 186.75

14 34.33 41.27 54.63 67.98 81.21 - 81.21 94.31 127.11 - 107.28+ 157.94 194.64 224.36 253.32 281.49 -

16 41.52 47.25 62.58 77.92 93.13 - 93.13 123.18 160.04 - 123.18 203.26 245.34 286.33 332.72 364.35 -

18 46.77 53.23 70.53 87.85 122.12 - 105.05 155.90 205.62 - 139.07+ 254.24 309.66 363.33 408.21 459.18 -

20 59.20 68.55 78.47 116.97 154.97 - 116.97 183.14 247.79 - 154.97 310.91 381.20 441.06 507.63 564.24 -

22 65.18 75.48 86.42 128.89 170.86 - 128.89 212.34 293.80 - 170.86 373.27 450.75 526.24 599.76 671.28 -

24 82.42 94.37 94.37 140.81 209.54 - 140.81 254.74 354.62 - 186.75+ 441.29 546.84 639.18 719.16 806.74 -

26 - - 127.58 202.65 - - 152.73+ - - - 202.65 - - - - - -

28 - - 137.52 218.54 271.94 - 164.65+ - - - 218.54 - - - - - -

30 118.21 147.23 147.45 234.44 291.80 - 176.57+ - - - 234.44 - - - - - -

32 - - 157.39 250.33 311.67 - 188.50+ 342.17 - - 250.33 - - - - - -

34 - - 167.32 266.22 331.54 - 200.42+ 364.01 - - 266.22 - - - - - -

36 - - 177.26 282.12 351.41 - 212.34+ 420.21 - - 282.12 - - - - - -

BS 1600Table 2. Nominal Masses of Seamless and Welded Plain End Pipe

Kilogrammes per metre

* Schedule 5S, 10S, 40S and 80S* apply to austenitic chromium-nickel steel pipe only.Due to the variable densities of austenitic stainless steels, these masses are based on carbon steel (see Clause 3), and should be corrected accordingly.Except where marked + masses of standard, extra strong and double extra strong pipe have pipe of a corresponding mass listed under one of the schedule numbers.

* The use of these sizes should be avoided wherever possible.*NOTE 1. For masses of threaded pipe with couplings see API Std. 5L.

NOTE 2. For nominal pipe sizes greater than 36 inches see API Std. 5LS.NOTE 3. For tolerances on masses see appropriate specifications.


Threaded Pipe

ISO R65 Light II - BS 1387 Light - BS Class A

1) As related to an average length of approx. 20 ft (6m). Theoretical weights of galvanized pipe are approx. 4,5% higher than the values above. Threads conforming to ISO/R 7.

DIN Standard No. 2439 Light-weight treaded pipe, which has been cancelled by the German classification authorities, included a nominal size range of from 1/2” to 2” as laid down in

ISO/R 65 - Light I.

ISO R65 Light I

Nominal size

inch mm

Outside diameter~

inch mm

Wall thickness

inch mm

Theoretical weight of black pipe1)

with plain ends with threads and couplingslb/ft kg/m lb/ft kg/m





Outside diameterin. mm

max. min. max. min.

Wall thickness

in. mm

Nominal size

in. mm

1/8 6,00 0,40625 10,3 0,072 1,8 0,243 0,361 0,245 0,364

1/4 8,00 0,53125 13,5 0,072 1,8 0,347 0,517 0,350 0,521

3/8 10,00 0,6875 17,5 0,072 1,8 0,453 0,674 0,457 0,680

1/2 15,00 0,84375 21,4 0,080 2,0 0,640 0,952 0,646 0,961

3/4 20,00 1,0625 27,0 0,092 2,35 0,944 1,41 0,954 1,42

1 25,00 1,34375 34,1 0,104 2,65 1,35 2,01 1,36 2,03

1 1/4 32,00 1,6875 42,9 0,104 2,65 1,73 2,58 1,75 2,61

1 1/2 40,00 1,90625 48,4 0,116 2,9 2,19 3,25 2,22 3,29

2 50,00 2,375 60,3 0,116 2,9 2,76 4,11 2,81 4,18

2 1/2 65,00 3,00 76,2 0,128 3,25 3,90 5,80 3,98 5,92

3 80,00 3,5 88,9 0,128 3,25 4,58 6,81 4,69 6,98

3 1/2 4,00 101,6 0,144 3,65 5,88 8,74 6,00 8,92

4 100,00 4,5 114,3 0,144 3,65 6,64 9,89 6,84 10,20

1/8 6,00 0,409 0,383 10,4 9,7 0,072 1,8 0,248 0,369 0,250 0,372

1/4 8,00 0,547 0,518 13,9 13,2 0,080 2,0 0,385 0,573 0,388 0,577

3/8 10,00 0,685 0,656 17,4 16,7 0,080 2,0 0,502 0,747 0,506 0,753

1/2 15,00 0,854 0,825 21,7 21,0 0,092 2,35 0,737 1,10 0,743 1,11

3/4 20,00 1,067 1,041 27,1 26,4 0,092 2,35 0,948 1,41 0,958 1,42

1 25,00 1,339 1,309 34,0 33,2 0,116 2,9 1,49 2,21 1,50 2,23

1 1/4 32,00 1,681 1,650 42,7 41,9 0,116 2,9 1,91 2,84 1,93 2,87

1 1/2 40,00 1,913 1,882 48,6 47,8 0,116 2,9 2,19 3,26 2,22 3,30

2 50,00 2,390 2,347 60,7 59,6 0,128 3,25 3,06 4,56 3,11 4,63

2 1/2 65,00 3,004 2,960 76,3 75,2 0,128 3,25 3,90 5,81 3,98 5,93

3 80,00 3,520 3,460 89,4 87,9 0,144 3,65 5,14 7,65 5,25 7,82

3 1/2 90,00 4,008 3,950 101,8 100,3 0,144 3,65 5,89 8,77 6,01 8,95

4 100,00 4,524 4,450 114,9 113,0 0,160 4,05 7,39 11,0 7,59 11,3


Threaded Pipe

ISO Medium - BS 1387 Medium - BS Class B DIN 2440

ISO Heavy - BS 1387 Heavy - BS Class C DIN 2441

1) Nominal size 31/2” is not included in DIN 2440.2) Values corresponding with ISO/R 64.3) As related to an average length of approx. 20 ft (6m). Theoretical weights of galvanized pipe are approx. 4,5% higher than the values quoted above.

Threads conforming to ISO/R 7

Nominal size

inch mm

Outside diameter 2)~

inch mm

Wall thickness

inch mm

Theoretical weight of black pipe 3)


* Available in seamless design only.1) Nominal size 31/2” is not included in DIN 2441.2) Values corresponding with ISO/R 64.

Threads conforming to ISO/R 7

Nominal size

inch mm

Outside diameter 2)~

inch mm

Wall thickness

inch mm

Theoretical weight of black pipe 3)


1/8 6,00 0,40625 10,2 0,080 2,0 0,273 0,407 0,275 0,410

1/4 8,00 0,53125 13,5 0,092 2,35 0,437 0,650 0,440 0,654

3/8 10,00 0,6875 17,2 0,092 2,35 0,573 0,852 0,577 0,858

1/2 15,00 0,84375 21,3 0,104 2,65 0,822 1,22 0,828 1,23

3/4 20,00 1,0625 26,9 0,104 2,65 1,06 1,58 1,07 1,59

1 25,00 1,34375 33,7 0,128 3,25 1,64 2,44 1,65 2,46

1 1/4 32,00 1,6875 42,4 0,128 3,25 2,11 3,14 2,13 3,17

1 1/2 40,00 1,90625 48,3 0,128 3,25 2,43 3,61 2,46 3,65

2 50,00 2,375 60,3 0,144 3,65 3,42 5,10 3,47 5,17

2 1/2 65,00 3,00 76,1 0,144 3,65 4,38 6,51 4,46 6,63

3 80,00 3,5 88,9 0,160 4,05 5,69 8,47 5,80 8,64

3 1/2 1) 4,00 101,6 0,160 4,05 6,53 9,72 6,65 9,90

4 100,00 4,5 114,3 0,176 4,50 8,14 12,1 8,34 12,4

5 125,00 5,5 139,7 0,192 4,85 10,9 16,2 11,2 16,7

6 150,00 6,5 165,1 0,192 4,85 12,9 19,2 13,3 19,8

1/8* 6,00 0,40625 10,2 0,104 2,65 0,331 0,493 0,333 0,496

1/4 8,00 0,53125 13,5 0,116 2,9 0,517 0,769 0,520 0,773

3/8 10,00 0,6875 17,2 0,116 2,9 0,686 1,02 0,690 1,03

1/2 15,00 0,84375 21,3 0,128 3,25 0,977 1,45 0,983 1,46

3/4 20,00 1,0625 26,9 0,128 3,25 1,27 1,90 1,28 1,91

1 25,00 1,34375 33,7 0,160 4,05 2,00 2,97 2,01 2,99

1 1/4 32,00 1,6875 42,4 0,160 4,05 2,58 3,84 2,60 3,87

1 1/2 40,00 1,90625 48,3 0,160 4,05 2,98 4,43 3,01 4,47

2 50,00 2,375 60,3 0,176 4,5 4,14 6,17 4,19 6,24

2 1/2 65,00 3,00 76,1 0,176 4,5 5,31 7,90 5,39 8,02

3 80,00 3,5 88,9 0,192 4,85 6,76 10,1 6,87 10,3

3 1/2 1) 4,00 101,6 0,192 4,85 7,76 11,6 7,88 11,8

4 100,00 4,5 114,3 0,212 5,4 9,71 14,4 9,91 14,7

5 125,00 5,5 139,7 0,212 5,4 12,0 17,8 12,3 18,3

6 150,00 6,5 165,1 0,212 5,4 14,3 21,2 14,7 21,8


JIS Japan Sizes G 3452Carbon Steel Pipes for Ordinary Piping

Dimensions and Weights (Black and Galvanized)

Note:*Furnished on special order.The permissible variation in weight is 10%.Galvanized pipe weights are heavier approximately by 6% than black pipe.The permissible variation in outside diameter is 0.5 mm for pipe furnished threaded or plain end with outside diameter 48.6 mm and under, 0.5 mm for

threaded pipe with 60.5 mm O.D., 0.7 for 76.3 mm, 0.8 mm for 89.1 mm and up to 165.2 mm, 0.9 mm for 190.7, 0.1 mm for 216.3 mm, 1.2 mm for 241.8,1.3 mm for 267.4 mm, 1.5 mm for 318.5 mm. and 1 % for plain end pipe with outside diameter 60.5 mm and up to 355.6 mm. Taper of thread is 3/4 inches per foot, measured on diameter.

Furnished with threads and coupling and in random lengths from 12 feet to 22 feet, unless otherwise specified.The weight per foot of pipe with threads and coupling is based on a length of 5 meters.

NominalPipe Size

in

Outside diameter

mm

Approx.Wall

Thicknessmm

Number of Threads

per Inch

Approximate WeightPlain End Treads and Coupling

lbs/ft kg/m kg/ft lbs/ft kg/m kg/ft

* 1/8 10,5 2,0 0,282 0,419 0,128 0,284 0,423 0,129 28,00

* 1/4 13,8 2,3 0,438 0,652 0,199 0,443 0,659 0,201 19,00

3/8 17,3 2,3 0,572 0,851 0,259 0,579 0,862 0,263 19,00

1/2 21,7 2,8 0,880 1,31 0,399 0,887 1,32 0,402 14,00

3/4 27,2 2,8 1,14 1,69 0,515 1,15 1,71 0,521 14,00

1 34,0 3,2 1,63 2,43 0,741 1,67 2,48 0,756 11,00

1 1/4 42,7 3,5 2,27 3,38 1,03 2,33 3,47 1,06 11,00

1 1/2 48,6 3,5 2,61 3,89 1,19 2,68 3,99 1,22 11,00

2 60,5 3,8 3,57 5,31 1,62 3,69 5,49 1,67 11,00

2 1/2 76,3 4,2 5,02 7,47 2,28 5,21 7,75 2,36 11,00

3 89,1 4,2 5,91 8,79 2,68 6,15 9,15 2,79 11,00

3 1/2 101,6 4,2 6,79 10,1 3,08 7,12 10,6 3,23 11,00

4 114,3 4,5 8,20 12,2 3,72 8,60 12,8 3,90 11,00

5 139,8 4,5 10,1 15,0 4,57 10,7 15,9 4,85 11,00

6 165,2 5,0 13,3 19,8 6,04 14,1 21,0 6,40 11,00

7 190,7 5,3 16,3 24,2 7,38 17,3 25,8 7,86 11,00

8 216,3 5,8 20,2 30,1 9,17 21,6 32,1 9,78 11,00

9 241,8 6,2 24,2 36,0 11,0 25,7 38,3 11,7 11,00

10 267,4 6,6 28,5 42,4 12,9 30,4 45,2 13,8 11,00

12 318,5 6,9 35,6 53,0 16,2 38,2 56,8 17,3 11,00

14 355,6 7,9 45,5 67,7 20,6 - - - -


ANSI B 2.1Standard Pipe Threads

1/8 0,37476 9,519 0,03704 0,941 27 0,02963 0,753 0,180 4,572 0,264 6,703

1/4 0,48989 12,443 0,05556 1,411 18 0,04444 1,129 0,200 5,080 0,402 10,206

3/8 0,62701 15,926 0,05556 1,411 18 0,04444 1,129 0,240 6,096 0,408 10,358

1/2 0,77843 19,772 0,07143 1,814 14 0,05714 1,451 0,320 8,128 0,534 13,556

3/4 0,98887 25,117 0,07143 1,814 14 0,05714 1,451 0,339 8,611 0,546 13,861

1 1,23863 31,461 0,08696 2,209 11 1/2 0,06957 1,767 0,400 10,160 0,683 17,343

1 1/4 1,58338 40,218 0,08696 2,209 11 1/2 0,06957 1,767 0,420 10,668 0,707 17,953

1 1/2 1,82234 46,288 0,08696 2,209 11 1/2 0,06957 1,767 0,420 10,668 0,724 18,377

2 2,29627 58,325 0,08696 2,209 11 1/2 0,06957 1,767 0,436 11,074 0,757 19,215

2 1/2 2,76216 70,159 0,12500 3,175 8 0,10000 2,540 0,682 17,323 1,138 28,893

3 3,38850 85,992 0,12500 3,175 8 0,10000 2,540 0,766 19,456 1,200 30,480

3 1/2 3,88881 98,776 0,12500 3,175 8 0,10000 2,540 0,821 20,853 1,250 31,750

4 4,38712 111,433 0,12500 3,175 8 0,10000 2,540 0,844 21,438 1,406 33,020

5 5,44929 138,412 0,12500 3,175 8 0,10000 2,540 0,937 23,800 1,513 35,720

6 6,50597 165,252 0,12500 3,175 8 0,10000 2,540 0,958 24,333 1,713 38,418

8 8,50003 215,901 0,12500 3,175 8 0,10000 2,540 1,063 27,000 1,300 43,498

10 10,62094 269,772 0,12500 3,175 8 0,10000 2,540 1,210 30,734 1,925 48,895

12 12,61781 320,492 0,12500 3,175 8 0,10000 2,540 1,360 34,544 2,125 53,975

E1 = Pitch Diameter at Handtight Planeh = Height of Thread max.I1 = Length of Normal Handtight EngagementI2 = Effective Length of Thread

NominalPipe Size

in

Pitch Diameter at Plane ofhand-tight Engagement

E1in. mm

Pitch ofThread

pin. mm

Number ofThreads per

Inch

Depth of Thread max

hin. mm

Length from End of Pipe to Plane

of hand-tight Engagement

l1in. mm

Lenght of usefull Thread

l2in. mm


Hollow Bar Mechanical Tubing

mm sizes

O.D. Thickness I.D. kg/m.

Centering on O.D.maximum minimum

O.D. I.D.

Centering on I.D.maximum minimum

O.D. I.D.

Series 1

32,00 6,00 20,00 5,7 4,2 31,5 21,6 30,4 20,5

36,00 5,5 25,00 5,2 4,5 35,5 26,6 34,4 25,5

40,00 6,00 28,00 5,7 5,4 39,5 29,6 38,4 28,5

45,00 6,5 32,00 6,2 6,6 44,5 33,6 43,4 32,5

50,00 7,00 36,00 6,7 7,9 49,5 37,6 48,4 36,5

56,00 8,00 40,00 7,6 10,0 55,5 41,9 54,2 40,5

63,00 6,5 50,00 6,2 9,9 62,00 51,9 61,4 51,00

71,00 7,5 56,00 7,1 12,7 70,00 58,2 69,1 57,00

75,00 7,5 60,00 7,1 13,6 74,00 62,3 73,1 61,00

80,00 8,5 63,00 8,1 16,3 79,00 65,5 77,9 64,00

85,00 9,00 67,00 8,6 18,3 84,00 69,6 82,8 68,00

90,00 9,5 71,00 9,0 20,5 89,00 73,8 87,6 72,00

95,00 10,00 80,00 9,5 22,9 94,00 77,9 92,5 76,00

100,00 10,00 80,00 9,5 24,2 99,00 83,0 97,4 81,00

106,00 13,00 90,00 12,4 32,0 105,00 83,4 103,1 81,00

112,00 11,00 90,00 10,5 30,0 111,00 93,3 109,1 91,00

118,00 14,00 90,00 13,3 38,8 117,00 93,8 114,8 91,00

125,00 12,5 100,00 11,9 37,8 124,00 103,8 121,8 101,00

132,00 13,00 106,00 12,4 41,8 131,00 109,9 128,6 107,00

140,00 14,00 112,00 13,3 47,5 139,00 116,2 136,4 113,00

150,00 12,5 125,00 11,9 47,0 149,00 129,3 146,3 126,00

160,00 14,00 132,00 13,3 55,8 159,00 136,6 156,0 133,00

170,00 15,00 140,00 14,3 63,4 169,00 144,9 165,7 141,00

180,00 15,00 150,00 14,3 68,0 179,00 155,1 175,5 151,00

190,00 15,00 160,00 14,3 72,3 189,00 165,3 185,3 161,00

200,00 20,00 160,00 19,0 96,8 199,00 166,0 194,8 161,00

212,00 21,00 170,00 20,0 108,0 211,00 176,3 206,5 171,00

224,00 22,00 180,00 20,9 120,0 223,00 186,7 218,2 181,00

236,00 23,00 190,00 21,9 132,2 235,00 197,0 229,9 191,00

250,00 25,00 200,00 23,8 151,8 249,00 207,5 243,5 201,00

Minimum guaran-teed thickness


Hollow Bar Mechanical Tubing

O.D. Thickness I.D.Minimumthickness

kg/m.

Centering on O.D.maximum minimum

O.D. I.D.

Centering on I.D.maximum minimum

O.D. I.D.

Series 2Series 3

36,00 8,00 20,00 7,6 5,8 35,5 21,8 34,2 20,540,00 7,5 25,00 7,1 6,4 39,5 26,8 38,2 25,545,00 8,5 28,00 8,1 8,1 44,5 29,8 43,2 28,550,00 9,00 32,00 8,5 9,6 49,5 34,0 48,0 32,556,00 10,00 36,00 9,4 11,9 55,5 38,3 53,8 36,563,00 11,5 40,00 10,9 15,2 62,00 42,4 61,1 41,0071,00 13,00 45,00 12,4 19,5 70,00 47,7 68,8 46,0075,00 12,5 50,00 11,9 20,3 74,00 52,8 72,8 51,0080,00 15,00 50,00 14,3 25,2 79,00 53,1 77,5 51,0085,00 15,00 55,00 14,3 27,2 84,00 58,2 82,4 56,0090,00 13,5 63,00 12,8 27,0 89,00 66,2 87,4 64,0095,00 14,00 67,00 13,3 29,7 94,00 70,3 92,3 68,00

100,00 14,5 71,00 13,8 32,4 99,00 74,5 97,1 72,00106,00 17,5 71,00 16,6 40,0 105,00 74,9 102,8 72,00112,00 16,00 80,00 15,2 40,1 111,00 83,8 108,8 81,00118,00 19,00 80,00 18,1 48,9 117,00 84,3 114,5 81,00125,00 17,5 90,00 16,6 49,4 124,00 94,3 121,5 91,00132,00 21,00 90,00 20,0 60,7 131,00 94,7 128,1 91,00140,00 20,00 100,00 19,0 63,0 139,00 104,8 136,0 101,00150,00 22,00 106,00 20,9 73,7 149,00 111,2 145,7 107,00160,00 24,00 112,00 22,8 85,0 159,00 117,6 155,4 113,00170,00 26,00 118,00 24,7 97,8 169,00 124,0 165,0 119,00180,00 27,5 125,00 26,1 109,5 179,00 131,4 174,8 126,00190,00 29,00 132,00 27,6 121,5 189,00 138,7 184,5 133,00200,00 30,00 140,00 28,5 133,1 199,00 147,0 194,2 141,00212,00 31,00 150,00 29,5 147,0 211,00 157,3 205,9 151,00224,00 32,00 160,00 30,4 161,0 223,00 167,7 217,6 161,00236,00 33,00 170,00 31,4 176,0 235,00 178,0 229,3 171,00250,00 35,00 180,00 33,3 197,4 249,00 188,5 242,9 181,00

32,00 8,00 16,00 7,6 5,0 31,5 17,8 30,2 16,536,00 10,00 16,00 9,5 6,7 35,5 18,0 34,0 16,540,00 10,00 20,00 9,5 7,7 39,5 22,0 38,0 20,545,00 12,5 20,00 11,9 10,4 44,5 22,2 42,8 20,550,00 12,5 25,00 11,9 12,0 49,5 27,2 47,8 25,556,00 14,00 28,00 13,3 15,0 55,5 30,5 53,6 28,563,00 15,5 32,00 14,7 18,7 62,00 34,8 60,8 33,0071,00 17,5 36,00 16,6 23,7 70,00 39,2 68,5 37,0075,00 17,5 40,00 16,6 25,8 74,00 43,3 72,5 41,0080,00 20,00 40,00 19,0 30,6 79,00 43,6 77,2 41,0085,00 20,00 45,00 19,0 33,3 84,00 48,7 82,1 46,0090,00 20,00 50,00 19,0 35,8 89,00 53,8 87,0 51,0095,00 22,5 50,00 21,4 41,6 94,00 54,2 91,8 51,00

100,00 22,00 56,00 20,9 43,9 99,00 60,2 96,7 57,00106,00 25,00 56,00 22,8 51,8 105,00 60,6 102,4 57,00112,00 24,5 63,00 23,3 54,9 111,00 67,7 108,3 64,00118,00 27,5 63,00 26,1 63,7 117,00 68,1 114,0 64,00125,00 27,00 71,00 25,7 67,8 124,00 76,2 120,9 72,00132,00 30,5 71,00 29,0 79,1 131,00 76,7 127,5 72,00140,00 30,00 80,00 28,5 84,7 139,00 85,8 135,4 81,00150,00 35,00 80,00 33,3 102,9 149,00 86,5 144,9 81,00160,00 35,00 90,00 33,3 112,0 159,00 96,7 154,7 91,00170,00 35,00 100,00 33,3 121,0 169,00 106,9 164,5 101,00180,00 40,00 100,00 38,0 143,4 179,00 107,6 174,0 101,00190,00 42,00 106,00 39,9 159,0 189,00 114,0 183,7 107,00200,00 44,00 112,00 41,8 176,0 199,00 120,4 193,4 113,00212,00 43,5 125,00 41,3 188,4 211,00 133,6 205,2 126,00224,00 46,00 132,00 43,7 210,5 223,00 141,1 216,8 133,00236,00 48,00 140,00 45,6 232,0 235,00 149,5 228,4 141,00250,00 50,00 150,00 47,5 257,0 249,00 160,0 242,0 151,00


Structural Hollow Sections Sizes & Properties

ISO Metric SizesSquare Hollow Sections

Size

D x Dmm

Thickness

tmm

Mass

Mkg/m

SectionalArea

Acm2

Moment ofInertia

lcm4

Radius ofGyration

rcm

ElasticModulus

Zcm3

PlasticModulus

Scm3

SuperficialAreaper m

m2

Approx.Length

per Tonnem

Torsional Constants

J Ccm4 cm3

20 x 20 2,0 1,12 1,42 0,76 0,73 0,76 0,95 1,22 1,07 0,076 8932,6 1,39 1,78 0,88 0,70 0,88 1,15 1,44 1,23 0,074 720

25 x 25 2,0* 1,43 1,82 1,59 0,94 1,27 1,56 2,52 1,81 0,096 7002,6* 1,80 2,30 1,90 0,91 1,52 1,91 3,06 2,14 0,094 5563,2* 2,15 2,74 2,14 0,88 1,71 2,21 3,49 2,38 0,093 466

30 x 30 2,6 2,21 2,82 3,49 1,11 2,33 2,88 5,56 3,30 0,114 4532,9* 2,44 3,10 3,76 1,10 2,51 3,13 6,02 3,54 0,114 4103,2 2,65 3,38 4,00 1,09 2,67 3,37 6,45 3,75 0,113 378

40 x 40 2,4* 2,81 3,58 8,39 1,53 4,20 5,03 13,1 6,04 0,155 3562,6 3,03 3,86 8,94 1,52 4,47 5,39 14,0 6,41 0,154 3312,9* 3,35 4,26 9,71 1,51 4,86 5,90 15,3 6,94 0,154 2993,2 3,66 4,66 10,4 1,50 5,22 6,40 16,5 7,43 0,153 2744,0 4,46 5,68 12,1 1,46 6,07 7,61 19,5 8,56 0,151 225

50 x 50 2,5* 3,71 4,72 17,7 1,94 7,07 8,38 27,4 10,2 0,195 2702,9* 4,26 5,42 19,9 1,92 7,98 9,54 31,1 11,5 0,194 2353,2 4,66 5,94 21,6 1,91 8,62 10,4 33,8 12,4 0,193 2154,0 5,72 7,28 25,5 1,87 10,20 12,5 40,4 14,5 0,191 1755,0 6,97 8,88 29,6 1,83 11,90 14,9 47,6 16,7 0,189 144

60 x 6O 2,9* 5,17 6,58 35,6 2,33 11,9 14,1 55,2 17,2 0,234 1943,2 5,67 7,22 38,7 2,31 12,9 15,3 60,1 18,6 0,233 1774,0 6,97 8,88 46,1 2,28 15,4 18,6 72,4 22,1 0,231 1445,0 8,54 10,9 54,4 2,24 18,1 22,3 86,3 25,8 0,229 118

70 x 70 2,9* 6,08 7,74 57,9 2,73 16,5 19,4 89,3 24,1 0,274 1653,6 7,46 9,50 69,5 2,70 19,9 23,6 108 28,7 0,272 1355,0 10,1 12,9 90,1 2,64 25,7 31,2 142 36,8 0,269 99,1

8O x 80 2,9* 6,99 8,90 88,0 3,14 22,0 25,7 135 32,1 0,314 1443,6 8,59 10,9 106 3,11 26,5 31,3 164 38,5 0,312 1175,0 11,7 14,9 139 3,05 34,7 41,7 217 49,8 0,309 85,5 6,3 14,4 18,4 165 3,00 41,3 50,5 261 58,8 0,306 69,5

90 x 90 3,6 9,72 12,4 154 3,52 34,1 40,0 237 49,7 0,352 1035,0 13,3 16,9 202 3,46 45,0 53,6 315 64,9 0,349 75,2 6,3 16,4 20,9 242 3,41 53,9 65,3 381 77,1 0,346 61,0

100 x 100 4,0 12,0 15,3 234 3,91 46,8 54,9 361 68,2 0,391 83,4 5,0 14,8 18,9 283 3,87 56,6 67,1 439 81,9 0,389 67,66,3 18,4 23,4 341 3,81 68,2 82,0 533 97,9 0,386 54,4 8,0 22,9 29,1 408 3,74 81,5 99.9 646 116 0,383 43,7

10,0 27,9 35,5 474 3,65 94,9 119 761 134 0,379 35,9

120 x 120 5,0 18,0 22,9 503 4,69 83,8 98,4 775 122 0,469 55,6 6,3 22,3 28,5 610 4,63 102 121 949 147 0,466 44,9 8,0 27,9 35,5 738 4,56 123 149 1159 176 0,463 35,9

10,0 34,2 43,5 870 4,47 145 178 1381 206 0,459 29,3

140 x 140 5,0 21,1 26,9 814 5,50 116 136 1251 170 0,549 47,4 6,3 26,3 33,5 994 5,45 142 168 1538 206 0,546 38,1 8,0 32,9 41,9 1212 5,38 173 207 1889 249 0,543 30,4

10,0 40,4 51,5 1441 5,29 206 250 2269 294 0,539 24,8

150 x 150 5,0 22,7 28,9 1009 5,91 135 157 1548 197 0,589 44,1 6,3 28,3 36,0 1236 5,86 165 194 1907 240 0,586 35,4 8,0 35,4 45,1 1510 5,78 201 240 2348 291 0,583 28,3

10,0 43,6 55,5 1803 5,70 240 290 2829 345 0,579 23,012,5 53,4 68,0 2125 5,59 283 348 3372 403 0,573 18,8 16,0 66,4 84,5 2500 5,44 333 421 4029 468 0,566 15,1

180 x 180 6,3 34,2 43,6 2186 7,08 243 283 3357 355 0,706 29,3 8,0 43,0 54,7 2689 7,01 299 352 4156 434 0,703 23,3

10,0 53,0 67,5 3237 6,92 360 429 5041 519 0,699 18,9 12,5 65,2 83,0 3856 6,82 428 519 6062 613 0,693 15,4 16,0 81,4 104 4607 6,66 512 634 7339 725 0,686 12,3

200 x 200 6,3 38,2 48,6 3033 7,90 303 353 4647 444 0,786 26,2 8,0 48,0 61,1 3744 7,83 374 439 5770 545 0,783 20,9

10,0 59,3 75,5 4525 7,74 452 536 7020 655 0,779 16,9 12,5 73,0 93,0 5419 7,63 542 651 8479 779 0,773 13,7 16,0 91,5 117,0 6524 7,48 652 799 10330 929 0,766 11,0

250 x 250 6,3 48,1 61,2 6049 9,94 484 559 9228 712 0,986 20,88,0 60,5 77,1 7510 9,87 601 699 11511 880 0,983 16,6

10,0 75,0 95,5 9141 8,78 731 858 14086 1065 0,979 13,4 12,5 92,8 118 11050 9,68 884 1048 17139 1279 0,973 10,8 16,0 117 149 13480 9,53 1078 1298 21109 1548 0,966 8,55

300 x 300 10,0 90,7 116 16150 11,8 1077 1254 24776 1575 1,18 11,1 12,5 112 143 19630 11,7 1309 1538 30290 1905 1,17 8,9316,0 142 181 24160 11,6 1610 1916 37566 2327 1,17 7,05

350 x 350 10,0 106 136 26050 13,9 1489 1725 39840 2186 1,38 9,4412,5 132 168 31810 13,8 1817 2122 48869 2655 1,37 7,5816,0 167 213 39370 13,6 2250 2655 60901 3265 1,37 5,99

400 x 400 10,0 122 156 39350 15,9 1968 2272 60028 2896 1,58 8,20 12,5 152 193 48190 15,8 2409 2800 73815 3530 1,57 6,58

*Size not included in IS0 657 Pert 14 Length per tonne rounded up.


Structural Hollow Sections Sizes & Properties

ISO Metric SizesRectangular Hollow Sections

Size

D x B

mm

Thick-nesst

mm

Mass

M

kg/m

SectionalArea

A

cm2

Moment of Inertia

lx-y y-ycm4 cm4

Elastic Modulus

Zx-y y-ycm3 cm3

Plastic Modulus

S x-y y-ycm3 cm3

Torsional Constants

J C

cm4 cm3

Approx.Lenght

per Tonne

m

SuperficialArea per m

m2

Radius of Gyration

rx-y y-ycm cm

50 x 30 2,4* 2,81 3,58 11,6 5,14 1,80 1,20 4,66 3,42 5,80 4,02 11,3 5,57 0,155 3562,6 3,03 3,86 12,40 5,45 1,79 1,19 4,96 3,63 6,21 4,30 12,1 5,90 0,154 3312,9* 3,35 4,26 13,50 5,9 1,78 1,18 5,40 3,93 6,81 4,70 13,2 6,37 0,154 2993,2 3,66 4,66 14,50 6,31 1,77 1,16 5,82 4,21 7,39 5,08 14,2 6,81 0,153 274

60 x 40 2,5* 3,71 4,72 23,1 12,20 2,21 1,61 7,71 6,10 9,43 7,09 25,0 9,74 0,195 2702,9* 4,26 5,42 26,2 13,7 2,20 1,59 8,72 6,86 10,70 8,05 28,4 10,9 0,194 2353,2 4,66 5,94 28,3 14,8 2,18 1,58 9,44 7,39 11,70 8,75 30,8 11,8 0,193 2154,0 5,72 7,28 33,60 17,3 2,15 1,54 11,20 8,67 14,1 10,50 36,6 13,7 0,191 175

80 x 40 2,9* 5,17 6,58 53,5 17,70 2,85 1,64 13,40 8,86 16,70 10,20 42,5 14,9 0,234 1943,2 5,67 7,22 58,1 19,1 2,84 1,63 14,50 9,56 18,30 11,10 46,1 16,1 0,233 1774,0 6,97 8,88 69,6 22,6 2,80 1,59 17,40 11,30 22,20 13,40 55,1 18,9 0,231 144

90 x 50 2,9* 6,08 7,74 82,9 32,80 3,27 2,06 18,40 13,10 22,70 15,00 74,2 21,8 0,274 1653,6 7,46 9,50 99,80 39,1 3,24 2,03 22,20 15,60 27,60 18,10 89,3 25,9 0,272 1355,0 10,1 12,9 130 50 3,18 1,97 28,90 20,00 36,60 23,90 116,0 32,9 0,269 99,1

100 x 50 2,9* 6,53 8,32 108 36,10 3,60 2,08 21,50 14,40 26,70 16,40 85,7 24,4 0,294 1543,2 7,18 9,14 117 39,1 3,58 2,07 23,50 15,60 29,20 17,90 93,3 26,4 0,293 1404,0 8,86 11,3 142 46,7 3,55 2,03 28,40 18,70 35,70 21,70 113,0 31,4 0,291 1135,0 10,9 13,9 170 55,1 3,50 1,99 34,00 22,00 43,30 26,10 135,0 37,0 0,289 91,86,3* 13,4 17,1 202 64,2 3,44 1,94 40,50 25,70 52,50 31,30 160,0 43,0 0,286 74,7

100 x 60 2,9* 6,99 8,90 121 54,60 3,69 2,48 24,30 18,20 29,50 20,70 118,0 29,8 0,314 1443,6 8,59 10,9 147 65,4 3,66 2,45 29,30 21,80 36,00 25,10 142,0 35,6 0,312 1175,0 11,7 14,9 192 84,7 3,60 2,39 38,50 28,20 48,10 33,30 187,0 45,9 0,309 85,56,3 14,4 18,4 230 99,9 3,54 2,33 46,00 33,30 58,40 40,20 224,0 53,9 0,306 69,5

120 x 60 3,6 9,72 12,4 230 76,90 4,31 2,49 38,30 25,60 47,60 29,20 183,0 43,3 0,352 1035,0 13,3 16,9 304 99,9 4,24 2,43 50,70 33,30 63,90 38,80 242,0 56,0 0,349 75,26,3 16,4 20,9 366 118 4,18 2,38 61,00 39,40 78,00 46,90 290,0 66,0 0,348 61,0

120 x 80 5,0 14,8 18,9 370 195 4,43 3,21 61,70 48,8 75,40 56,70 401 77,9 0,389 67,66,3 18,4 23,4 447 234 4,37 3,16 74,60 58,4 92,30 69,10 486 93,0 0,386 54,48,0 22,9 29,1 537 278 4,29 3,09 89,5 69,40 113 83,90 586 110 0,383 43,7

10,0 27,9 35,5 628 320 4,20 3,00 105 80,00 134 99,40 688 126 0,379 35,9

150 x 100 5,0 18,7 23,9 747 396 5,59 4,07 99,50 79,10 121 90,80 806 127 0,489 53,56,3 23,3 29,7 910 479 5,53 4,02 121 95,9 148 111 985 153 0,486 43,08,0 29,1 37,1 1106 577 5,46 3,94 147 115 183 137 1202 184 0,483 34,4

10,0 35,7 45,5 1312 678 5,37 3,86 175 136 220 164 1431 215 0,479 28,1

160 x 80 5,0 18,0 22,9 753 251 5,74 3,31 94,10 62,8 117 71,70 599 106 0,469 55,66,3 22,3 28,5 917 302 5,68 3,26 115 75,60 144 87,70 729 127 0,466 44,98,0 27,9 35,5 1113 361 5,60 3,19 139 90,20 177 107 882 151 0,463 35,9

10,0 34,2 43,5 1318 419 5,50 3,10 165 105 213 127 1041 175 0,459 29,3

200 x 100 5,0 22,7 28,9 1509 509 7,23 4,20 151 102 186 115 1202 172 0,589 44,16,3 28,3 36,0 1851 618 7,17 4,14 185 124 231 141 1473 208 0,586 35,48,0 35,4 45,1 2269 747 7,09 4,07 227 149 286 174 1802 251 0,583 28,3

10,0 43,6 55,5 2718 881 7,00 3,98 272 176 346 209 2154 296 0,579 23,012,5 53,4 68,0 3218 1022 6,88 3,88 322 204 417 249 2541 342 0,573 18,816,0 66,4 84,5 3808 1175 6,71 3,73 381 235 505 297 2988 393 0,566 15,1

250 x 150 6,3 38,2 48,6 4178 1886 9,27 6,23 334 252 405 284 4049 413 0,786 26,28,0 48,0 61,1 5167 2317 9,19 6,16 413 309 505 353 5014 506 0,783 20,9

10,0 59,3 75,5 6259 2784 9,10 6,07 501 371 618 430 6082 606 0,779 16,912,5 73,0 93,0 7518 3310 8,99 5,97 601 441 751 520 7317 717 0,773 13,716,0 91,5 117 9089 3943 8,83 5,82 727 526 924 635 8863 851 0,766 11,0

300 x 200 6,3 48,1 61,2 7880 4216 11,30 8,30 525 422 627 475 8468 681 0,986 20,88,0 60,5 77,1 9798 5219 11,30 8,23 653 522 785 593 10549 840 0,983 16,6

10,0 75,0 95,5 11940 6331 11,20 8,14 796 633 964 726 12890 1016 0,979 13,412,5 92,6 118 14460 7619 11,10 8,04 964 762 1179 886 15654 1217 0,973 10,816,0 117 149 17700 9239 10,90 7,89 1180 924 1462 1094 19227 1469 0,966 8,55

400 x 200 10,0 90,7 116 24140 8138 14,50 8,39 1207 814 1492 916 19236 1377 1,180 11,112,5 112 143 29410 9820 14,30 8,29 1471 982 1831 1120 23408 1657 1,170 8,9316,0 142 181 36300 11950 14,20 8,14 1815 1195 2285 1388 28835 2011 1,170 7,05

450 x 250 10,0 106 136 37180 14900 16,60 10,50 1653 1192 2013 1338 33247 1986 1,380 9,4412,5 132 168 45470 18100 16,50 10,40 2021 1448 2478 1642 40668 2407 1,370 7,5816,0 167 213 56420 22250 16,30 10,20 2508 1780 3103 2047 50478 2948 1,370 5,99

*Size not included in ISO 657 Part 14 Length per tonne rounded up.


Weights for Precision Steel Tubeskg/m

Outside diameter in mmWall Wallmm 4 5 6 7 8 9 10 11 12 mm

0,5 0,043 0,055 0,068 0,080 0,092 0,105 0,117 0,129 0,142 0,50,6 0,050 0,065 0,080 0,095 0,109 0,124 0,139 0,154 0,169 0,60,7 0,057 0,074 0,091 0,109 0,126 0,143 0,161 0,178 0,195 0,70,8 0,063 0,083 0,103 0,122 0,142 0,162 0,181 0,201 0,221 0,80,9 0,069 0,091 0,113 0,135 0,158 0,180 0,202 0,224 0,246 0,9

1 0,074 0,099 0,123 0,148 0,173 0,197 0,222 0,247 0,271 11,1 0,079 0,106 0,133 0,160 0,187 0,214 0,241 0,269 0,296 1,11,2 0,083 0,112 0,142 0,172 0,201 0,231 0,260 0,290 0,320 1,21,3 0,087 0,119 0,151 0,183 0,215 0,247 0,279 0,311 0,343 1,31,4 0,090 0,124 0,159 0,193 0,228 0,262 0,297 0,331 0,366 1,4

1,5 0,092 0,129 0,166 0,203 0,240 0,277 0,314 0,351 0,388 1,51,6 0,174 0,213 0,253 0,292 0,331 0,371 0,410 1,61,7 0,180 0,222 0,264 0,306 0,348 0,390 0,432 1,71,8 0,186 0,231 0,275 0,320 0,364 0,408 0,453 1,81,9 0,192 0,239 0,286 0,333 0,379 0,426 0,473 1,9

2 0,197 0,247 0,296 0,345 0,395 0,444 0,493 22,2 0,206 0,260 0,315 0,369 0,423 0,477 0,532 2,22,50 0,339 0,401 0,462 0,524 0,586 2,502,8 0,497 0,566 0,635 2,8

3 0,518 0,592 0,666 33,25 0,541 0,621 0,701 3,253,50 0,561 0,647 0,734 3,503,75 0,578 0,670 0,763 3,75

4 0,592 0,691 0,789 44,25 0,812 4,254,50 0,832 4,50




0,5 0,154 0,166 0,179 0,191 0,203 0,216 0,228 0,240 0,253 0,50,6 0,183 0,198 0,213 0,228 0,243 0,257 0,272 0,287 0,302 0,60,7 0,212 0,230 0,247 0,264 0,281 0,299 0,316 0,333 0,350 0,70,8 0,241 0,260 0,280 0,300 0,320 0,339 0,359 0,379 0,399 0,80,9 0,269 0,291 0,313 0,335 0,357 0,380 0,402 0,424 0,446 0,9

1 0,296 0,321 0,345 0,370 0,395 0,419 0,444 0,469 0,493 11,1 0,323 0,350 0,377 0,404 0,431 0,458 0,486 0,513 0,540 1,11,2 0,349 0,379 0,408 0,438 0,468 0,497 0,527 0,556 0,586 1,21,3 0,375 0,407 0,439 0,471 0,503 0,535 0,567 0,599 0,632 1,31,4 0,400 0,435 0,470 0,504 0,539 0,573 0,608 0,642 0,677 1,4

1,5 0,425 0,462 0,499 0,536 0,573 0,610 0,647 0,684 0,721 1,51,6 0,450 0,489 0,529 0,568 0,608 0,647 0,687 0,726 0,765 1,61,7 0,474 0,516 0,558 0,599 0,641 0,683 0,725 0,767 0,809 1,71,8 0,497 0,542 0,586 0,630 0,675 0,719 0,763 0,808 0,852 1,81,9 0,520 0,567 0,614 0,661 0,707 0,754 0,801 0,848 0,895 1,9

2 0,543 0,592 0,641 0,690 0,740 0,789 0,838 0,888 0,937 22,2 0,586 0,640 0,694 0,749 0,803 0,857 0,911 0,966 1,020 2,22,50 0,647 0,709 0,771 0,832 0,894 0,956 1,017 1,079 1,141 2,502,8 0,704 0,773 0,842 0,911 0,981 1,050 1,119 1,188 1,257 2,8

3 0,740 0,814 0,888 0,962 1,036 1,110 1,184 1,258 1,332 33,25 0,781 0,862 0,942 1,022 1,102 1,182 1,262 1,342 1,423 3,253,50 0,820 0,906 0,993 1,079 1,165 1,251 1,338 1,424 1,510 3,503,75 0,855 0,948 1,040 1,133 1,225 1,318 1,410 1,503 1,595 3,75

4 0,888 0,986 1,085 1,184 1,282 1,381 1,480 1,578 1,677 44,25 0,917 1,022 1,127 1,231 1,336 1,441 1,546 1,651 1,755 4,254,50 0,943 1,054 1,165 1,276 1,387 1,498 1,609 1,720 1,831 4,54,75 1,084 1,201 1,318 1,435 1,552 1,669 1,786 1,903 4,75

5 1,110 1,233 1,356 1,480 1,603 1,726 1,850 1,973 55,25 1,262 1,392 1,521 1,651 1,780 1,910 2,039 5,255,50 1,289 1,424 1,560 1,695 1,831 1,967 2,102 5,505,75 1,312 1,453 1,595 1,737 1,879 2,021 2,162 5,75

6 1,480 1,628 1,776 1,924 2,072 2,220 66,25 2,119 2,273 6,256,50 2,164 2,324 6,506,75 2,206 2,372 6,75

7 2,244 2,417 7




0,5 0,265 0,277 0,290 0,302 0,314 0,327 0,339 0,351 0,364 0,50,6 0,317 0,331 0,346 0,361 0,376 0,391 0,405 0,420 0,435 0,60,7 0,368 0,385 0,402 0,419 0,437 0,454 0,471 0,489 0,506 0,70,8 0,418 0,438 0,458 0,477 0,497 0,517 0,537 0,556 0,576 0,80,9 0,468 0,490 0,513 0,535 0,557 0,579 0,601 0,624 0,645 0,9

1 0,518 0,543 0,567 0,592 0,617 0,641 0,666 0,690 0,715 11,1 0,567 0,594 0,621 0,648 0,675 0,703 0,730 0,757 0,784 1,11,2 0,616 0,645 0,675 0,704 0,734 0,763 0,793 0,823 0,852 1,21,3 0,664 0,696 0,728 0,760 0,792 0,824 0,856 0,888 0,920 1,31,4 0,711 0,746 0,780 0,815 0,849 0,884 0,918 0,953 0,987 1,4

1,5 0,758 0,795 0,832 0,869 0,906 0,943 0,98 1,017 1,054 1,51,6 0,805 0,844 0,884 0,923 0,963 1,002 1,042 1,081 1,121 1,61,7 0,851 0,893 0,935 0,977 1,019 1,061 1,103 1,144 1,186 1,71,8 0,897 0,941 0,985 1,030 1,074 1,119 1,163 1,207 1,252 1,81,9 0,942 0,989 1,035 1,082 1,129 1,176 1,223 1,270 1,317 1,9

2 0,986 1,036 1,085 1,134 1,184 1,233 1,282 1,332 1,381 22,2 1,074 1,129 1,183 1,237 1,291 1,346 1,400 1,454 1,508 2,22,50 1,202 1,264 1,325 1,387 1,449 1,510 1,572 1,634 1,695 2,502,8 1,326 1,395 1,464 1,533 1,602 1,671 1,740 1,809 1,878 2,8

3 1,406 1,480 1,554 1,628 1,702 1,776 1,850 1,923 1,997 33,25 1,503 1,583 1,663 1,743 1,823 1,903 1,984 2,064 2,144 3,253,50 1,597 1,683 1,769 1,856 1,942 2,028 2,115 2,201 2,287 3,503,75 1,688 1,780 1,873 1,965 2,056 2,150 2,243 2,335 2,427 3,75

4 1,776 1,874 1,973 2,071 2,170 2,269 2,367 2,466 2,565 44,25 1,860 1,965 2,070 2,175 2,280 2,384 2,489 2,594 2,699 4,254,50 1,942 2,053 2,164 2,275 2,386 2,497 2,608 2,719 2,830 4,504,75 2,021 2,138 2,255 2,372 2,489 2,606 2,723 2,841 2,958 4,75

5 2,096 2,219 2,343 2,466 2,589 2,713 2,836 2,959 3,083 55,25 2,169 2,298 2,427 2,557 2,686 2,816 2,945 3,075 3,204 5,255,50 2,238 2,374 2,509 2,645 2,780 2,916 3,052 3,187 3,323 5,505,75 2,304 2,446 2,588 2,730 2,871 3,013 3,155 3,297 3,439 5,75

6 2,368 2,515 2,663 2,811 2,959 3,107 3,255 3,403 3,551 66,25 2,428 2,582 2,736 2,890 3,044 3,198 3,352 3,506 3,660 6,256,50 2,485 2,645 2,805 2,966 3,126 3,286 3,446 3,607 3,767 6,506,75 2,539 2,705 2,872 3,038 3,204 3,371 3,537 3,704 3,870 6,75

7 2,589 2,762 2,935 3,107 3,280 3,453 3,625 3,798 3,971 77,25 3,174 3,325 3,531 3,710 3,889 4,068 7,257,50 3,237 3,422 3,607 3,792 3,977 4,162 7,507,75 3,297 3,488 3,679 3,870 4,061 4,253 7,75

8 3,354 3,551 3,749 3,946 4,143 4,340 88,50 4,088 4,297 4,507 8,509 4,217 4,439 4,661 99,50 4,803 9,50

10 4,932 10




0,5 0,376 0,388 0,401 0,413 0,425 0,438 0,450 0,462 0,475 0,50,6 0,450 0,465 0,479 0,494 0,509 0,524 0,539 0,553 0,568 0,60,7 0,523 0,540 0,558 0,575 0,592 0,609 0,627 0,644 0,661 0,70,8 0,596 0,616 0,635 0,655 0,675 0,694 0,714 0,734 0,754 0,80,9 0,668 0,690 0,712 0,735 0,757 0,779 0,801 0,823 0,846 0,9

1 0,740 0,764 0,789 0,814 0,838 0,863 0,888 0,912 0,937 11,1 0,811 0,838 0,865 0,892 0,920 0,947 0,974 1,001 1,028 1,11,2 0,882 0,911 0,941 0,971 1,000 1,030 1,059 1,089 1,119 1,21,3 0,952 0,984 1,016 1,048 1,080 1,112 1,144 1,177 1,209 1,31,4 1,022 1,056 1,091 1,125 1,160 1,195 1,229 1,264 1,298 1,4

1,5 1,091 1,128 1,165 1,202 1,239 1,276 1,313 1,350 1,387 1,51,6 1,160 1,199 1,239 1,278 1,318 1,357 1,397 1,436 1,476 1,61,7 1,228 1,270 1,312 1,354 1,396 1,438 1,480 1,522 1,564 1,71,8 1,296 1,341 1,385 1,429 1,474 1,518 1,562 1,607 1,651 1,81,9 1,363 1,410 1,457 1,504 1,551 1,598 1,645 1,691 1,738 1,9

2 1,430 1,480 1,529 1,578 1,628 1,677 1,726 1,776 1,825 22,2 1,563 1,617 1,671 1,725 1,780 1,834 1,888 1,942 2,051 2,22,50 1,757 1,819 1,880 1,942 2,004 2,065 2,127 2,189 2,250 2,502,8 1,947 2,016 2,085 2,154 2,223 2,293 2,362 2,431 2,500 2,8

3 2,071 2,145 2,219 2,293 2,367 2,441 2,515 2,589 2,663 33,25 2,224 2,304 2,384 2,464 2,545 2,625 3,705 2,785 2,865 3,253,50 2,374 2,460 2,546 2,632 2,719 2,805 2,891 2,978 3,064 3,503,75 2,520 2,612 2,705 2,797 2,890 2,982 3,075 3,167 3,260 3,75

4 2,663 2,762 2,861 2,959 3,058 3,156 3,255 3,354 3,452 44,25 2,804 2,908 3,013 3,118 3,223 3,328 3,432 3,537 3,642 4,254,50 2,941 3,052 3,163 3,274 3,385 3,496 3,607 3,717 3,828 4,504,75 3,075 3,192 3,309 3,426 3,543 3,660 3,778 3,895 4,012 4,75

5 3,206 3,329 3,452 3,576 3,699 3,822 3,946 4,069 4,192 55,25 3,334 3,463 3,599 3,722 3,852 3,981 4,111 4,240 4,369 5,255,50 3,459 3,594 3,730 3,865 4,001 4,137 4,272 4,408 4,544 5,505,75 3,580 3,722 3,864 4,006 4,148 4,289 4,431 4,573 4,715 5,75

6 3,699 3,847 3,995 4,143 4,291 4,439 4,587 4,735 4,883 66,25 3,815 3,969 4,123 4,277 4,431 4,585 4,739 4,893 5,048 6,256,50 3,927 4,087 4,248 4,408 4,568 4,729 4,889 5,049 5,209 6,506,75 4,037 4,203 4,369 4,536 4,702 4,869 5,035 5,202 5,968 6,75

7 4,143 4,316 4,488 4,661 4,834 5,006 5,179 5,351 5,524 77,25 4,246 4,425 4,604 4,783 4,962 5,140 5,319 5,498 5,676 7,257,50 4,347 4,532 4,716 4,901 5,086 5,271 5,456 5,641 5,826 7,507,75 4,444 4,635 4,826 5,017 5,208 5,399 5,590 5,782 5,973 7,75

8 4,538 4,735 4,932 5,130 5,327 5,524 5,721 5,919 6,116 88,50 4,717 4,926 5,136 5,345 5,555 5,765 5,974 6,184 6,394 8,509 4,883 5,105 5,327 5,549 5,771 5,993 6,215 6,437 6,659 99,50 5,037 5,271 5,506 5,740 5,974 6,209 6,443 6,677 6,811 9,50

10 5,179 5,426 5,672 5,919 6,165 6,412 6,659 6,905 7,152 10




0,5 0,487 0,499 0,512 0,524 0,536 0,549 0,561 0,573 0,586 0,50,6 0,583 0,598 0,613 0,627 0,642 0,657 0,672 0,687 0,701 0,60,7 0,678 0,696 0,713 0,730 0,747 0,765 0,782 0,799 0,817 0,70,8 0,773 0,793 0,813 0,833 0,852 0,872 0,892 0,911 0,931 0,80,9 0,868 0,890 0,912 0,934 0,957 0,979 1,001 1,023 1,045 0,9

1 0,962 0,986 1,011 1,036 1,060 1,085 1,110 1,134 1,159 11,1 1,055 1,082 1,109 1,136 1,164 1,191 1,218 1,245 1,272 1,11,2 1,148 1,178 1,207 1,237 1,267 1,296 1,326 1,355 1,385 1,21,3 1,241 1,273 1,305 1,337 1,369 1,401 1,433 1,465 1,497 1,31,4 1,333 1,367 1,402 1,436 1,471 1,505 1,540 1,574 1,609 1,4

1,5 1,424 1,461 1,498 1,535 1,572 1,609 1,646 1,683 1,720 1,51,6 1,515 1,555 1,594 1,633 1,673 1,712 1,752 1,791 1,831 1,61,7 1,606 1,648 1,689 1,731 1,773 1,815 1,857 1,899 1,941 1,71,8 1,696 1,740 1,784 1,829 1,873 1,918 1,962 2,006 2,051 1,81,9 1,785 1,832 1,879 1,926 1,973 2,019 2,066 2,113 2,160 1,9

2 1,874 1,923 1,973 2,022 2,071 2,121 2,170 2,219 2,269 22,2 2,051 2,105 2,159 2,214 2,268 2,322 2,376 2,431 2,485 2,22,50 2,312 2,374 2,435 2,497 2,558 2,620 2,682 2,743 2,805 2,502,8 2,569 2,638 2,707 2,776 2,845 2,914 2,983 3,052 3,121 2,8

3 2,737 2,811 2,885 2,959 3,033 3,107 3,181 3,255 3,329 33,25 2,945 3,025 3,106 3,186 3,266 3,346 3,426 3,506 3,586 3,253,50 3,150 3,237 3,323 3,409 3,496 3,582 3,668 3,754 3,841 3,503,75 3,352 3,445 3,537 3,630 3,722 3,815 3,907 4,000 4,092 3,75

4 3,551 3,650 3,748 3,847 3,946 4,044 4,143 4,242 4,340 44,25 3,747 3,852 3,956 4,061 4,166 4,271 4,376 4,480 4,585 4,254,50 3,939 4,050 4,161 4,272 4,383 4,494 4,605 4,716 4,827 4,504,75 4,129 4,246 4,363 4,480 4,598 4,715 4,832 4,949 5,066 4,75

5 4,316 4,439 4,562 4,685 4,809 4,932 5,055 5,179 5,302 55,25 4,499 4,628 4,758 4,887 5,017 5,146 5,276 5,405 5,535 5,255,50 4,679 4,815 4,950 5,086 5,222 5,357 5,493 5,629 5,764 5,505,75 4,856 4,998 5,140 5,282 5,424 5,565 5,707 5,849 5,991 5,75

6 5,031 5,179 5,327 5,475 5,622 5,770 6,918 6,066 6,214 66,25 5,202 5,356 5,510 5,664 5,818 5,972 6,126 6,281 6,435 6,256,50 5,370 5,530 5,690 5,851 6,011 6,171 6,331 6,492 6,652 6,506,75 5,535 5,701 5,868 6,034 6,200 6,367 6,533 6,700 6,866 6,75

7 5,696 5,869 6,042 6,214 6,387 6,560 6,732 6,905 7,077 77,25 5,855 6,034 6,213 6,392 6,570 6,749 6,928 7,107 7,285 7,257,50 6,011 6,196 6,381 6,566 6,751 6,936 7,121 7,306 7,490 7,507,75 6,164 6,355 6,546 6,737 6,928 7,119 7,310 7,501 7,692 7,75

8 6,313 6,511 6,708 6,905 7,103 7,299 7,497 7,694 7,891 88,50 6,603 6,813 7,022 7,232 7,442 7,651 7,861 8,071 8,280 8,509 6,881 7,102 7,324 7,546 7,768 7,990 8,212 8,434 8,656 99,50 7,146 7,380 7,614 7,849 8,083 8,317 8,551 8,786 9,020 9,50

10 7,398 7,645 7,892 8,138 8,385 8,632 8,878 9,125 9,371 1011 7,867 8,138 8,410 8,681 8,952 9,223 9,495 9,766 10,04 1112 8,286 8,582 8,878 9,174 9,470 9,766 10,06 10,36 10,65 12




0,5 0,598 0,610 0,50,6 0,716 0,731 0,60,7 0,834 0,851 0,70,8 0,951 0,971 0,80,9 1,068 1,090 0,9

1 1,184 1,208 1,233 1,258 1,282 1,307 1,332 1,356 1,381 11,1 1,299 1,326 1,354 1,381 1,408 1,435 1,462 1,489 1,516 1,11,2 1,414 1,444 1,474 1,503 1,533 1,562 1,592 1,622 1,651 1,21,3 1,529 1,561 1,593 1,625 1,657 1,689 1,722 1,754 1,786 1,31,4 1,643 1,678 1,712 1,747 1,781 1,816 1,850 1,885 1,920 1,4

1,5 1,757 1,794 1,831 1,867 1,905 1,942 1,979 2,016 2,053 1,51,6 1,870 1,910 1,949 1,988 2,028 2,067 2,107 2,146 2,186 1,61,7 1,983 2,025 2,067 2,109 2,151 2,193 2,234 2,276 2,318 1,71,8 2,095 2,140 2,184 2,228 2,273 2,317 2,361 2,406 2,450 1,81,9 2,207 2,254 2,901 2,347 2,394 2,441 2,488 2,535 2,582 1,9

2 2,318 2,367 2,417 2,466 2,515 2,565 2,614 2,663 2,713 22,2 2,539 2,593 2,648 2,702 2,756 2,810 2,865 2,919 2,973 2,22,50 2,867 2,928 2,990 3,052 3,113 3,175 3,237 3,298 3,360 2,502,8 3,190 3,259 3,328 3,397 3,466 3,535 3,605 3,674 3,743 2,8

3 3,403 3,477 3,551 3,625 3,699 3,773 3,847 3,921 3,995 33,25 3,667 3,747 3,827 3,907 3,987 4,067 4,148 4,228 4,308 3,253,50 3,927 4,013 4,100 4,186 4,272 4,359 4,445 4,531 4,618 3,503,75 4,184 4,277 4,369 4,462 4,554 4,647 4,739 4,832 4,924 3,75

4 4,439 4,537 4,636 4,735 4,833 4,932 5,031 5,129 5,228 44,25 4,690 4,795 4,900 5,004 5,109 5,214 5,319 5,424 5,528 4,254,50 4,938 5,049 5,160 5,271 5,382 5,493 5,604 5,715 5,826 4,504,75 5,183 5,300 5,417 5,535 5,652 5,769 5,886 6,003 6,120 4,75

5 5,425 5,549 5,672 5,795 5,918 6,042 6,165 6,288 6,412 55,25 5,664 5,794 5,923 6,052 6,182 6,311 6,441 6,570 6,700 5,255,50 5,900 6,036 6,171 6,307 6,442 6,578 6,714 6,849 6,985 5,505,75 6,133 6,274 6,416 6,558 6,700 6,842 6,983 7,125 7,267 5,75

6 6,362 6,510 6,658 6,806 6,954 7,102 7,250 7,398 7,546 66,25 6,589 6,743 6,897 7,051 7,205 7,359 7,514 7,668 7,822 6,256,50 6,812 6,973 7,133 7,293 7,453 7,614 7,774 7,934 8,095 6,506,75 7,033 7,199 7,366 7,532 7,699 7,865 8,031 8,198 8,364 6,75

7 7,250 7,423 7,595 7,768 7,941 8,113 8,286 8,458 8,631 77,25 7,464 7,643 7,822 8,001 8,179 8,358 8,537 8,716 8,895 7,257,50 7,675 7,860 8,045 8,230 8,415 8,600 8,785 8,970 9,155 7,507,75 7,883 8,075 8,266 8,547 8,648 8,839 9,030 9,221 9,412 7,75

8 8,088 8,286 8,483 8,680 8,878 9,075 9,272 9,469 9,667 88,50 8,490 8,699 8,909 9,119 9,328 9,538 9,747 9,957 10,17 8,509 8,878 9,100 9,322 9,544 9,766 9,988 10,21 10,43 10,65 99,50 9,254 9,489 9,723 9,957 10,19 10,43 10,66 10,89 11,13 9,50

10 9,618 9,865 10,11 10,36 10,60 10,85 11,10 11,34 11,59 1011 10,31 10,58 10,85 11,12 11,39 11,67 11,94 12,21 12,48 1112 10,95 11,25 11,54 11,84 12,13 12,43 12,73 13,02 13,32 1213 11,86 12,18 12,50 12,82 13,15 13,47 13,79 14,11 13

14 13,12 13,47 13,81 14,16 14,50 14,85 1415 13,69 14,06 14,43 14,80 15,17 15,54 1516 14,21 14,60 14,99 15,39 15,78 16,18 16



1 1,406 1,430 1,455 1,480 1,504 1,529 1,554 1,578 1,603 11,1 1,543 1,570 1,598 1,625 1,652 1,679 1,706 1,733 1,760 1,11,2 1,681 1,710 1,740 1,770 1,799 1,829 1,858 1,888 1,918 1,21,3 1,818 1,850 1,882 1,914 1,946 1,978 2,010 2,042 2,074 1,31,4 1,954 1,989 2,023 2,058 2,092 2,127 2,161 2,196 2,230 1,4

1,5 2,090 2,127 2,164 2,201 2,238 2,275 2,312 2,349 2,386 1,51,6 2,225 2,265 2,304 2,344 2,383 2,423 2,462 2,502 2,541 1,61,7 2,360 2,402 2,444 2,486 2,528 2,570 2,612 2,654 2,696 1,71,8 2,495 2,539 2,583 2,628 2,672 2,717 2,761 2,805 2,850 1,81,9 2,629 2,675 2,722 2,769 2,816 2,863 2,910 2,956 3,003 1,9

2 2,762 2,811 2,861 2,910 2,959 3,009 3,058 3,107 3,156 22,2 3,027 3,082 3,136 3,190 3,244 3,299 3,353 3,407 3,461 2,22,50 3,422 3,483 3,545 3,607 3,668 3,730 3,791 3,853 3,915 2,502,8 3,812 3,881 3,950 4,019 4,088 4,157 4,226 4,295 4,364 2,8

3 4,069 4,143 4,217 4,291 4,365 4,439 4,513 4,587 4,661 33,25 4,388 4,468 4,548 4,628 4,709 4,789 4,869 4,949 5,029 3,253,50 4,704 4,790 4,877 4,963 5,049 5,135 5,222 5,308 5,394 3,503,75 5,017 5,109 5,202 5,294 5,387 5,479 5,572 5,664 5,757 3,75

4 5,327 5,425 5,524 5,622 5,721 5,820 5,918 6,017 6,116 44,25 5,633 5,738 5,843 5,948 6,052 6,157 6,262 6,367 6,472 4,254,50 5,937 6,048 6,159 6,270 6,381 6,492 6,603 6,714 6,825 4,504,75 6,237 6,355 6,472 6,589 6,706 6,823 6,940 7,057 7,175 4,75

5 6,535 6,658 6,782 6,905 7,028 7,151 7,275 7,398 7,521 55,25 6,829 6,959 7,088 7,218 7,347 7,477 7,606 7,736 7,865 5,255,50 7,121 7,256 7,392 7,527 7,663 7,799 7,934 8,070 8,206 5,505,75 7,409 7,551 7,692 7,834 7,976 8,118 8,260 8,401 8,543 5,75

6 7,694 7,842 7,990 8,138 8,286 8,434 8,582 8,730 8,878 66,25 7,976 8,130 8,284 8,438 8,592 8,747 8,901 9,055 9,209 6,256,50 8,255 8,415 8,576 8,736 8,896 9,056 9,217 9,377 9,537 6,506,75 8,531 8,697 8,864 9,030 9,197 9,363 9,530 9,696 9,862 6,75

7 8,804 8,976 9,149 9,321 9,494 9,667 9,839 10,01 10,18 77,25 9,073 9,252 9,431 9,610 9,788 9,967 10,15 10,32 10,50 7,257,50 9,340 9,525 9,710 9,895 10,08 10,26 10,45 10,63 10,82 7,507,75 9,604 9,795 9,986 10,18 10,37 10,56 10,75 10,94 11,13 7,75

8 9,864 10,06 10,26 10,46 10,65 10,85 11,05 11,24 11,44 88,50 10,38 10,59 10,80 11,01 11,22 11,42 11,63 11,84 12,05 8,509 10,88 11,10 11,32 11,54 11,76 11,99 12,21 12,43 12,65 99,50 11,36 11,60 11,83 12,07 12,30 12,53 12,77 13,00 13,24 9,50

10 11,84 12,08 12,33 12,58 12,82 13,07 13,32 13,56 13,81 1011 12,75 13,02 13,29 13,56 13,84 14,11 14,38 14,65 14,92 1112 13,61 13,91 14,21 14,50 14,80 15,09 15,39 15,69 15,98 1213 14,43 14,75 15,07 15,39 15,71 16,03 16,35 16,67 16,99 13

14 15,19 15,54 15,88 16,23 16,57 16,92 17,26 17,61 17,95 1415 15,91 16,28 16,65 17,02 17,39 17,76 18,13 18,50 18,87 1516 16,57 16,97 17,36 17,76 18,15 18,55 18,94 19,34 19,73 16





1 1,628 1,652 1,677 1,702 1,726 1,751 1,776 1,800 1,825 11,1 1788 1,815 1,842 1,869 1,896 1,923 1,950 1,977 2,005 1,11,2 1,947 1,977 2,006 2,036 2,066 2,095 2,125 2,154 2,184 1,21,3 2,106 2,138 2,170 2,202 2,234 2,267 2,299 2,331 2,363 1,31,4 2,265 2,299 2,334 2,368 2,403 2,437 2,472 2,506 2,541 1,4

1,5 2,423 2,460 2,497 2,534 2,571 2,608 2,645 2,682 2,719 1,51,6 2,580 2,620 2,659 2,699 2,738 2,778 2,817 2,857 2,896 1,61,7 2,738 2,779 2,821 2,863 2,905 2,947 2,989 3,031 3,073 1,71,8 2,894 2,938 2,982 3,027 3,072 3,116 3,160 3,204 3,249 1,81,9 3,050 3,097 3,144 3,191 3,238 3,284 3,331 3,378 3,425 1,9

2 3,206 3,255 3,304 3,354 3,403 3,452 3,502 3,551 3,600 22,2 3,516 3,570 3,624 3,679 3,739 3,787 9,841 3,896 3,950 2,22,50 3,976 4,038 4,100 4,161 4,223 4,285 4,346 4,408 4,470 2,502,8 4,433 4,502 4,571 4,640 4,709 4,778 4,847 4,917 4,986 2,8

3 4,735 4,809 4,883 4,957 5,031 5,105 5,179 5,252 5,327 33,25 5,109 5,189 5,270 5,350 5,430 5,510 5,590 5,670 5,750 3,253,50 5,481 5,567 5,653 5,740 5,826 5,912 5,999 6,085 6,171 3,503,75 5,849 5,942 6,034 6,126 6,219 6,311 6,404 6,496 6,589 3,75

4 6,214 6,313 6,412 6,510 6,609 6,708 6,806 6,905 7,003 44,25 6,577 6,681 6,786 6,891 6,996 7,101 7,205 7,310 7,415 4,254,50 6,936 7,047 7,158 7,269 7,380 7,490 7,601 7,712 7,823 4,504,75 7,292 7,409 7,526 7,643 7,760 7,877 7,994 8,112 8,229 4,75

5 7,645 7,768 7,891 8,015 8,138 8,261 8,384 8,508 8,631 55,25 7,994 8,124 8,253 8,383 8,512 8,642 8,771 8,901 9,030 5,255,50 8,341 8,477 8,613 8,748 8,884 9,019 9,155 9,291 9,426 5,505,75 8,685 8,827 8,969 9,110 9,252 9,394 9,536 9,678 9,819 5,75

6 9,026 9,174 9,321 9,469 9,617 9,765 9,913 10,06 10,21 66,25 9,363 9,517 9,671 9,825 9,980 10,13 10,29 10,44 10,60 6,256,50 9,698 9,858 10,02 10,18 10,34 10,50 10,66 10,82 10,98 6,506,75 10,03 10,20 10,36 10,53 10,69 10,86 11,03 11,19 11,36 6,75

7 10,36 10,53 10,70 10,88 11,05 11,22 11,39 11,57 11,74 77,25 10,68 10,86 11,04 11,22 11,40 11,58 11,76 11,93 12,11 7,257,50 11,00 11,19 11,37 11,56 11,74 11,93 12,11 12,30 12,48 7,507,75 11,32 11,51 11,71 11,90 12,09 12,28 12,47 12,66 12,85 7,75

8 11,64 11,84 12,03 12,23 12,43 12,63 12,82 13,02 13,22 88,50 12,26 12,47 12,68 12,89 13,10 13,31 13,52 13,73 13,94 8,509 12,87 13,10 13,32 13,54 13,76 13,98 14,21 14,43 14,65 99,50 13,47 13,71 13,94 14,17 14,41 14,64 14,88 15,11 15,35 9,50

10 14,06 14,30 14,55 14,80 15,04 15,29 15,54 15,78 16,03 1011 15,19 15,46 15,73 16,01 16,28 16,55 16,82 17,09 17,36 1112 16,28 16,57 16,87 17,16 17,46 17,76 18,05 18,35 18,64 1213 17,31 17,63 17,95 18,27 18,60 18,92 19,24 19,56 19,8g 13

14 18,30 18,64 18,99 19,34 19,68 20,03 20,37 20,72 21,06 1415 19,24 19,61 19,98 20,35 20,72 21,09 21,46 21,83 22,20 1516 20,12 20,52 20,91 21,31 21,70 22,10 22,49 22,89 23,28 1617 20,96 21,38 21,80 22,22 22,64 23,06 23,48 23,90 24,32 17

18 21,75 22,20 22,64 23,08 23,53 23,97 24,42 24,86 25,30 18




1 1,850 1,874 1,899 1,923 1,948 1,973 1,997 2,022 2,047 11,1 2,032 2,059 2,086 2,113 2,140 2,167 2,194 2,222 2,249 1,11,2 2,213 2,243 2,273 2,302 2,332 2,361 2,391 2,421 2,450 1,21,3 2,395 2,427 2,459 2,491 2,523 2,555 2,587 2,619 2,651 1,31,4 2,575 2,610 2,645 2,679 2,714 2,748 2,783 2,817 2,852 1,4

1,5 2,756 2,793 2,830 2,867 2,904 2,941 2,978 3,015 3,052 1,51,6 2,936 2,975 3,014 3,054 3,093 3,133 3,172 3,212 3,251 1,61,7 3,115 3,157 3,198 3,241 3,282 3,324 3,366 3,408 3,450 1,71,8 3,294 3,338 3,382 3,427 3,471 3,516 3,560 3,604 3,649 1,81,9 3,472 3,519 3,566 3,612 3,659 3,706 3,753 3,800 3,847 1,9

2 3,650 3,699 3,748 3,798 3,847 3,896 3,946 3,995 4,044 22,2 4,004 4,058 4,113 4,167 4,221 4,275 4,330 4,384 4,438 2,22,50 4,531 4,593 4,655 4,716 4,778 4,840 4,901 4,963 5,024 2,502,8 5,055 5,124 5,193 5,262 5,331 5,400 5,469 5,538 5,607 2,8

3 5,401 5,475 5,549 5,622 5,696 5,770 5,844 5,918 5,992 33,25 5,831 5,911 5,991 6,071 6,151 6,231 6,311 6,392 6,472 3,253,50 6,257 6,344 6,430 6,516 6,603 6,689 6,775 6,862 6,948 3,503,75 6,681 6,774 6,866 6,959 7,051 7,144 7,236 7,325 7,421 3,75

4 7,102 7,201 7,299 7,398 7,497 7,595 7,694 7,793 7,891 44,25 7,520 7,625 7,729 7,835 7,939 8,044 8,149 8,253 8,358 4,254,50 7,934 8,045 8,156 8,267 8,378 8,489 8,600 8,711 8,822 4,504,75 8,346 8,463 8,580 8,697 8,814 8,932 9,049 9,166 9,283 4,75

5 8,754 8,878 9,001 9,124 9,248 8,371 9,494 9,617 9,741 55,25 9,160 9,289 9,419 9,548 9,678 9,807 9,936 10,07 10,20 5,255,50 9,562 9,698 9,833 9,969 10,10 10,24 10,38 10,51 10,65 5,505,75 9,961 10,10 10,24 10,39 10,53 10,67 10,81 10,95 11,10 5,75

6 10,36 10,51 10,65 10,80 10,95 11,10 11,24 11,39 11,54 66,25 10,75 10,90 11,06 11,21 11,37 11,52 11,67 11,83 11,98 6,256,50 11,14 11,30 11,46 11,62 11,78 11,94 12,10 12,26 12,42 6,506,75 11,53 11,69 11,86 12,03 12,19 12,36 12,53 12,69 12,86 6,75

7 11,91 12,08 12,25 12,43 12,60 12,77 12,95 13,12 13,29 77,25 12,29 12,47 12,65 12,83 13,01 13,19 13,36 13,54 13,72 7,257,50 12,67 12,85 13,04 13,22 13,41 13,59 13,78 13,96 14,15 7,507,75 13,04 13,23 13,43 13,62 13,81 14,00 14,19 14,38 14,57 7,75

8 13,42 13,61 13,81 14,01 14,20 14,40 14,60 14,80 14,99 88,50 14,15 14,36 14,57 14,78 14,99 15,20 15,41 15,62 15,83 8,509 14,87 15,09 15,32 15,54 15,76 15,98 16,20 16,43 16,65 99,50 15,58 15,81 16,05 16,28 16,52 16,75 16,99 17,22 17,45 9,50

10 16,28 16,52 16,77 17,02 17,26 17,51 17,76 18,00 18,25 1011 17,63 17,90 18,18 18,45 18,72 18,99 19,26 19,53 19,80 1112 18,94 19,24 19,53 19,83 20,12 20,42 20,72 21,01 21,31 1213 20,20 20,52 20,84 21,16 21,48 21,80 22,12 22,44 22,76 13

14 21,41 21,75 22,10 22,44 22,79 23,13 23,48 23,82 24,17 1415 22,57 22,94 23,31 23,68 24,05 24,42 24,79 25,16 25,53 1516 23,68 24,07 24,46 24,86 25,25 25,65 26,04 26,44 26,83 1617 24,74 25,16 25,57 25,99 26,41 26,83 27,52 27,67 28,09 17

18 25,75 26,19 26,63 27,08 27,52 27,97 28,41 28,85 29,30 18




1 2,071 2,096 2,121 2,145 2,170 2,195 11,1 2,276 2,303 2,330 2,357 2,984 2,412 1,11,2 2,480 2,509 2,539 2,569 2,598 2,628 1,21,3 2,683 2,715 2,747 2,779 2,811 2,844 1,31,4 2,886 2,921 2,955 2,989 3,024 3,059 1,4

1,5 3,089 3,126 3,163 3,200 3,237 3,274 3,459 1,51,6 3,291 3,330 3,370 3,409 3,448 3,488 3,686 1,61,7 3,492 3,534 3,576 3,618 3,660 3,702 3,912 1,71,8 3,693 3,737 3,782 3,826 3,871 3,915 4,137 1,81,9 3,894 3,940 3,987 4,034 4,081 4,128 4,362 1,9

2 4,094 4,143 4,192 4,242 4,291 4,340 4,587 4,833 5,080 22,2 4,492 4,547 4,601 4,655 4,709 4,764 5,035 5,306 5,701 2,22,50 5,086 5,148 5,209 5,271 5,333 5,394 5,703 6,011 6,319 2,502,8 5,676 5,745 5,814 5,883 5,952 6,021 6,367 6,712 7,057 2,8

3 6,066 6,140 6,214 6,288 6,362 6,436 6,806 7,176 7,546 33,25 6,552 6,632 6,712 6,792 6,872 6,953 7,353 7,754 8,155 3,253,50 7,034 7,121 7,207 7,293 7,380 7,466 7,897 8,329 8,760 3,503,75 7,514 7,606 7,699 7,791 7,883 7,976 8,438 8,901 9,363 3,75

4 7,990 8,088 8,187 8,286 8,384 8,483 8,976 9,469 9,963 44,25 8,463 8,568 8,673 8,777 8,882 8,987 9,511 10,04 10,56 4,254,50 8,933 9,044 9,155 9,266 9,377 9,488 10,04 10,60 11,15 4,504,75 9,400 9,517 9,634 9,751 9,869 9,986 10,57 11,16 11,74 4,75

5 9,864 9,987 10,11 10,23 10,36 10,48 11,10 11,71 12,33 55,25 10,32 10,45 10,58 10,71 10,84 10,97 11,61 12,27 12,91 5,255,50 10,78 10,92 11,05 11,19 11,33 11,46 12,14 12,82 13,50 5,505,75 11,24 11,38 11,52 11,66 11,80 11,95 12,66 13,36 14,07 5,75

6 11,69 11,84 11,98 12,13 12,28 12,43 13,17 13,91 14,65 66,25 12,14 12,29 12,45 12,60 12,75 12,91 13,68 14,45 15,22 6,256,50 12,58 12,74 12,90 13,06 13,22 13,38 14,19 14,99 15,79 6,506,75 13,03 13,19 13,36 13,52 13,69 13,86 14,69 15,52 16,35 6,75

7 13,46 13,64 13,81 13,98 14,15 14,33 15,19 16,05 16,92 77,25 13,90 14,08 14,26 14,44 14,62 14,79 15,69 16,58 17,48 7,257,50 14,33 14,52 14,70 14,89 15,07 15,26 16,18 17,11 18,03 7,507,75 14,76 14,95 15,15 15,34 15,53 15,72 16,67 17,63 18,59 7,75

8 15,19 15,39 15,59 15,78 15,98 16,18 17,16 18,15 19,14 88,50 16,04 16,25 16,46 16,67 16,88 17,08 18,13 19,18 20,23 8,509 16,87 17,09 17,31 17,53 17,76 17,98 19,09 20,20 21,31 99,50 17,69 17,92 18,16 18,39 18,63 18,86 20,03 21,20 22,37 9,50

10 18,50 18,74 18,99 19,24 19,48 19,73 20,96 22,20 23,43 1011 20,08 20,35 20,62 20,89 21,16 21,43 22,79 24,14 25,50 1112 21,60 21,90 22,2 22,49 22,79 23,08 24,56 26,04 27,52 1213 23,08 23,40 23,72 24,05 24,37 24,69 26,29 27,89 29,50 13

14 24,51 24,86 25,20 25,55 25,90 26,24 27,97 29,69 31,42 1415 25,90 26,27 26,63 27,00 27,37 27,74 29,59 31,44 33,29 1516 27,23 27,62 28,02 28,41 28,81 29,20 31,17 33,15 35,12 1617 28,51 28,93 29,35 29,77 30,19 30,61 32,70 34,80 36,89 17

18 29,74 30,19 30,63 31,07 31,52 31,96 34,18 36,40 38,62 1819 30,93 31,39 31,86 32,33 32,80 33,27 35,61 37,95 40,30 1920 32,06 32,55 33,05 33,54 34,03 34,53 36,99 39,46 41,93 20




2 5,327 5,573 5,820 6,067 22,2 5,977 6,254 6,532 2,22,50 6,627 6,936 7,244 7,553 2,502,8 7,402 7,747 8,093 8,438 2,8

3 7,916 8,286 8,656 9,026 9,395 9,765 10,14 10,51 10,88 33,25 8,555 8,956 9,357 9,758 10,16 10,56 10,96 11,36 11,76 3,253,50 9,192 9,624 10,06 10,49 10,92 11,35 11,78 12,21 12,64 3,503,75 9,825 10,29 10,75 11,21 11,67 12,14 12,60 13,06 13,52 3,75

4 10,46 10,95 11,44 11,94 12,43 12,92 13,42 13,91 14,40 44,25 11,08 11,61 12,13 12,66 13,18 13,70 14,23 14,75 15,28 4,254,50 11,71 12,26 12,82 13,37 13,93 14,48 15,04 15,59 16,15 4,504,75 12,33 12,91 13,50 14,09 14,67 15,26 15,84 16,43 17,01 4,75

5 12,95 13,56 14,17 14,80 15,41 16,03 16,65 17,26 17,88 55,25 13,56 14,21 14,86 15,50 16,15 16,80 17,45 18,09 18,74 5,255,50 14,17 14,85 15,53 16,21 16,89 17,56 18,24 18,92 19,60 5,505,75 14,78 15,49 16,20 16,91 17,62 18,33 19,04 19,74 20,45 5,75

6 15,39 16,13 16,87 17,61 18,35 19,09 19,83 20,57 21,31 66,25 15,99 16,76 17,53 18,30 19,07 19,84 20,61 21,38 22,16 6,256,50 16,59 17,39 18,19 18,99 19,80 20,60 21,40 22,20 23,00 6,506,75 17,19 18,02 18,85 19,68 20,52 21,35 22,18 23,01 23,84 6,75

7 17,78 18,64 19,51 20,37 21,23 22,10 22,96 23,82 24,68 77,25 18,37 19,26 20,16 21,05 21,95 22,84 23,73 24,63 25,52 7,257,50 18,96 19,88 20,81 21,73 22,66 23,58 24,51 25,43 26,36 7,507,75 19,54 20,50 21,45 22,41 23,36 24,32 25,27 26,23 27,19 7,75

8 20,12 21,11 22,10 23,08 24,07 25,05 26,04 27,03 28,01 88,50 21,28 22,33 23,37 24,42 25,47 26,52 27,57 28,61 29,66 8,509 22,42 23,53 24,64 25,75 26,86 27,97 29,08 30,19 31,30 99,50 23,55 24,72 25,89 27,06 28,23 29,40 30,57 31,75 32,92 9,50

10 24,66 25,90 27,13 28,36 29,59 30,83 32,06 33,29 34,53 1011 26,86 28,21 29,57 30,93 32,28 33,64 35,00 36,35 37,71 1112 29,00 30,48 31,96 33,44 34,92 36,40 37,88 39,36 40,84 1213 31,10 32,70 34,30 35,91 37,51 39,11 40,72 42,32 43,92 13

14 33,15 34,87 36,60 38,32 40,05 41,78 43,50 45,23 46,96 1415 35,14 36,99 38,84 40,69 42,54 44,39 46,24 48,09 49,94 1516 37,09 39,06 41,04 43,01 44,98 46,96 48,93 50,90 52,87 1617 38,99 41,09 43,18 45,28 47,38 49,47 51,57 53,66 55,76 17

18 40,84 43,06 45,28 47,50 49,72 51,94 54,16 56,38 58,60 1819 42,64 44,98 47,33 49,67 52,01 54,35 56,70 59,04 61,38 1920 44,39 46,86 49,32 51,79 54,26 56,72 59,19 61,65 64,12 20



Outside diameter in mmWall Wallmm 155 160 165 170 175 180 185 190 195 200 mm

3 11,25 11,62 11,99 12,36 12,73 13,10 13,47 13,84 14,21 14,58 33,25 12,16 12,56 12,96 18,37 13,77 14,17 14,57 14,97 15,37 15,77 3,253,50 13,08 13,51 13,94 14,37 14,80 15,24 15,67 16,10 16,53 16,96 3,503,75 13,99 14,45 14,91 15,37 15,84 16,30 16,76 17,22 17,69 18,15 3,75

4 14,89 15,69 15,88 16,37 16,87 17,36 17,86 18,35 18,84 19,34 44,25 15,80 16,32 16,85 17,37 17,90 18,42 18,95 19,47 19,99 20,52 4,254,50 16,70 17,26 17,81 18,37 18,92 19,48 20,03 20,59 21,14 21,70 4,504,75 17,60 18,19 18,77 19,36 19,94 20,53 21,12 21,70 22,29 22,87 4,75

5 18,50 19,11 19,73 20,34 20,96 21,58 22,19 22,81 23,43 24,04 55,25 19,39 20,03 20,68 21,33 21,98 22,62 23,27 23,92 24,57 25,21 5,255,50 20,28 20,95 21,68 22,31 22,99 23,67 24,35 25,02 25,70 26,38 5,505,75 21,16 21,87 22,58 23,29 24,00 24,71 25,42 26,13 26,83 27,54 5,75

6 22,05 22,79 23,53 24,27 25,01 25,75 26,48 27,22 27,96 28,70 66,25 22,99 23,70 24,47 25,24 26,01 26,78 27,55 28,32 29,09 29,86 6,256,50 23,80 24,60 25,41 26,21 27,01 27,81 28,61 29,41 30,21 31,02 6,506,75 24,68 25,51 26,34 27,17 28,01 28,84 29,67 30,50 31,34 32,17 6,75

7 25,55 26,41 27,27 28,14 29,00 29,86 30,73 31,59 32,45 33,32 77,25 26,42 27,31 28,20 29,10 29,99 60,89 31,78 32,67 33,57 34,46 7,257,50 27,28 28,20 29,13 30,05 30,98 31,90 32,83 33,75 34,68 35,60 7,507,75 28,14 29,10 30,05 31,01 31,96 32,92 33,88 34,83 35,79 36,74 7,75

8 29,00 29,99 30,97 31,96 32,95 33,93 34,92 35,90 36,89 37,99 88,50 30,71 31,76 32,81 33,85 34,90 35,90 37,00 38,05 39,10 40,14 8,509 32,41 33,52 34,62 35,73 36,84 37,95 39,05 40,17 41,28 42,39 99,50 34,09 35,26 36,43 37,60 38,77 39,95 41,12 42,29 43,46 44,63 9,50

10 35,76 36,99 38,23 39,46 40,69 41,92 43,16 44,39 45,62 46,86 1011 39,06 40,42 41,78 43,13 44,49 45,85 47,20 48,56 49,92 51,27 1112 42,32 43,80 45,28 46,76 48,24 49,72 51,20 52,68 54,16 55,64 1213 45,53 47,13 48,73 50,33 51,94 53,54 55,14 56,75 58,35 59,95 13

14 48,68 50,41 52,13 53,86 55,59 57,31 59,04 60,77 62,49 64,22 1415 51,79 53,64 55,49 57,ß4 59,19 61,04 62,89 64,74 66,59 68,44 1516 54,85 56,82 58,79 60,77 62,74 64,71 66,68 68,66 70,63 72,60 1617 57,86 59,95 62,05 64,14 66,24 68,34 70,43 72,53 74,63 76,72 17

18 60,82 63,04 65,26 67,47 69,69 71,91 74,13 76,35 78,57 80,79 1819 63,73 66,07 68,41 70,75 73,10 75,44 77,78 80,13 82,47 84,81 1920 66,59 69,05 71,52 73,98 76,45 78,92 81,38 83,85 86,92 88,79 20


Section TubesElectrically welded precision tubes, rectangular or square cross section

• Ex-stock, other sizes shortly ex-mill

size weightmm kg/m

size weightmm kg/m

10 x 10 x 1 • 0,28

10 x 10 x1,5 0,40

12 x 12 x 1 0,35

12 x 12 x 1,5 0,49

15 x 15 x 1 0,44

15 x 15 x 1,5 • 0,63

15 x 15 x 2 0,81

16 x 16 x 1,5 0,67

16 x 16 x 2 0,85

18 x 18 x 1,5 0,77

18 x 18 x 2 1,00

20 x 10 x 1 0,44

20 x 10 x 1,5 • 0,63

20 x 10 x 2 0,81

20 x 15 x 1,5 • 0,75

20 x 15 x 2 0,97

20 x 20 x 1 0,60

20 x 20 x 1,5 • 0,87

20 x 20 x 2 • 1,12

20 x 20 x 2,5 1,33

20 x 20 x 3 1,60

22 x 22 x 1,5 0,95

22 x 22 x 2 1,23

25 x 10 x 1,5 • 0,75

25 x 10 x 2 0,97

25 x 15 x 1,5 • 0,87

25 x 15 x 2 1,12

25 x 20 x 1,5 0,99

25 x 20 x 2 • 1,28

25 x 25 x 1 0,75

25 x 25 x 1,5 • 1,10

25 x 25 x 2 • 1,44

25 x 25 x 2,5 1,76

25 x 25 x 3 • 1,92

28 x 28 x 2 1,63

30 x 10 x 1 0,60

30 x 10 x 1,5 • 0,87

30 x l0 x 2 1,12

30 x 15 x 1 0,67

30 x 15 x 1,5 • 0,99

30 x 15 x 2 • 1,28

30 x 15 x 3 1,84

30 x 20 x 1 0,75

30 x 20 x 1,5 • 1,10

30 x 20 x 2 • 1,44

30 x 20 x 2,5 1,76

30 x 20 x 3 • 1,92

30 x 25 x 1,5 1,22

30 x 25 x 2 1,59

30 x 25 x3 2,16

30 x 30 x 1 0,91

30 x 30 x 1,5 • 1,34

30 x 30 x 2 • 1,75

30 x 30 x 2,5 2,15

30 x 30 x 3 • 2,39

30 x 30 x 4 3,32

32 x 32 x 1.5 1,44

32 x 32 x 2 1,88

34 x 15 x 2 1,41

34 x 20 x 1,5 1,20

34 x 20 x 2 1,56

34 x 34 x 1,5 1,53

34 x 34 x 2 • 2,00

34 x 34 x 3 2,77

35 x 10 x 1,5 • 0,99

35 x 10 x 2 1,28

35 x 15 x 1,5 1,10

35 x 15 x 2 1,44

35 x 20 x 1,5 1,22

35 x 20 x 2 • 1,59

35 x 25 x 1,5 1,34

35 x 25 x 2 • 1,75

35 x 25 x 3 2,39

35 x 35 x 1.5 1,57

35 x 35 x 2 • 2,07

35 x 35 x 2,5 2,54

35 x 35 x 3 • 2,86

35 x 35 x 4 3,79

38 x 38 x 2 2,26

38 x 38 x 3 3,30

40 x 10 x 1,5 1,10

40 x 10 x 2 1,44

St 37-2 (5235JR) DIN 2395 part 1 and 2



size weightmm kg/m

size weightmm kg/m

40 x 15 x 1,5 1,22

40 x 15 x 2 1,59

40 x 20 x 1 0,91

40 x 20 x 1,5 • 1,34

40 x 20 x 2 • 1,75

40 x 20 x 2,5 2,15

40 x 20 x 3 • 2,39

40 x 25 x 1,5 • 1,46

40 x 25 x 2 • 1,91

40 x 25 x 3 2,63

40 x 30 x 1,5 1,57

40 x 30 x 2 • 2,07

40 x 30 x 3 • 2,86

40 x 30 x 4 3,79

40 x 40 x 1,5 1,81

40 x 40 x 2 • 2,38

40 x 40 x 2,5 2,93

40 x 40 x 3 • 3,33

40 x 40 x 4 • 4,25

40 x 40 x 5 5,50

45 x 15 x 1,5 1,34

45 x 20 x 1,5 1,46

45 x 20 x 2 1,91

45 x 25 x 1,5 1,57

45 x 25 x 2 • 2,07

45 x 30 x 2 2,22

45 x 35 x 2 2,38

45 x 45 x 2 • 2,69

45 x 45 x 3 3,80

45 x 45 x 4 4,88

50 x 10 x 1,5 1,34

50 x 10 x 2 1,75

50 x 15 x 1,5 1,46

50 x 15 x 2 1,91

50 x 20 x 1,5 1,57

50 x 20 x 2 • 2,07

50 x 20 x 3 2,86

50 x 25 x 1,5 1,69

50 x 25 x 2 • 2,22

50 x 25 x 3 3,10

50 x 30 x 1,5 1,81

50 x 30 x 2 • 2,38

50 x 30 x 2,5 2,93

50 x 30 x 3 • 3,33

50 x 30 x 4 • 4,25

50 x 34 x 1,5 1,90

50 x 34 x 2 • 2,51

50 x 35 x 2 2,54

50 x 35 x 3 3,57

50 x 40 x 1,5 2,05

50 x 40 x 2 • 2,69

50 x 40 x 3 • 3,80

50 x 40 x 4 4,88

50 x 50 x 1,5 2,27

50 x 50 x 2 • 3,01

50 x 50 x 2,5 3,72

50 x 50 x 3 • 4,28

50 x 50 x 4 • 5,51

50 x 50 x 5 • 6,56

55 x 34 x 2 • 2,66

55 x 55 x 2 3,32

55 x 55 x 3 4,75

55 x 55 x 4 6,14

60 x 15 x 2 2,22

60 x 20 x 1,5 1,81

60 x 20 x 2 • 2,38

60 x 20 x 3 3,33

60 x 25 x 2 2,54

60 x 25 x 3 3,57

60 x 30 x 1,5 2,05

60 x 30 x 2 • 2,69

60 x 30 x 2,5 3,33

60 x 30 x 3 • 3,80

60 x 30 x 4 4,88

60 x 34 x 2 2,80

60 x 35 x 2 2,83

60 x 35 x 3 4,19

60 x 40 x 1,5 2,27

60 x 40 x 2 • 3,01

60 x 40 x 2,5 3,72

60 x 40 x 3 • 4,28

60 x 40 x 4 • 5,51

60 x 40 x 5 6,56

60 x 45 x 2 3,14

60 x 50 x 2 3,32

60 x 50 x 3 4,75

60 x 50 x 4 6,14

60 x 60 x 1,5 2,76

60 x 60 x 2 • 3,64

60 x 60 x 2,5 4,50

60 x 60 x 3 • 5,22

60 x 60 x 4 • 6,76

60 x 60 x 5 • 8,13

65 x 65 x 2 3,95

65 x 65 x 3 5,69

65 x 65 x 4 7,39

67 x 35 x 2 3,07

70 x 20 x 2 2,69



size weightmm kg/m

size weightmm kg/m

70 x 30 x 2 3,01

70 x 30 x 3 4,28

70 x 30 x 4 5,51

70 x 35 x 2 3,14

70 x 35 x 3 4,48

70 x 40 x 2 • 3,32

70 x 40 x 3 • 4,75

70 x 40 x 4 6,14

70 x 40 x 5 7,34

70 x 50 x 2 3,64

70 x 50 x 3 5,22

70 x 50 x 4 • 6,76

70 x 50 x 5 8,13

70 x 70 x 2 4,26

70 x 70 x 3 • 6,16

70 x 70 x 4 • 8,02

70 x 70 x 5 • 9,70

75 x 75 x 2 4,58

80 x 20 x 2 • 3,01

80 x 20 x 3 4,28

80 x 30 x 2 • 3,32

80 x 30 x 3 4,75

80 x 30 x 4 6,14

80 x 34 x 2 3,45

80 x 40 x 2 • 3,64

80 x 40 x 2,5 4,50

80 x 40 x 3 • 5,22

80 x 40 x 4 • 6,76

80 x 40 x 5 • 8,13

80 x 50 x 2 3,95

80 x 50 x 3 • 5,69

80 x 50 x 4 • 7,39

80 x 50 x 5 • 8,91

80 x 60 x 2 • 4,26

80 x 60 x 3 • 6,16

80 x 60 x 4 • 8,02

80 x 60 x 5 9,70

80 x 80 x 2 4,89

80 x 80 x 3 • 7,10

80 x 80 x 4 • 9,28

8.0 x 80 x 5 • 11,30

90 x 20 x 2 • 3,32

90 x 30 x 2 3,64

90 x 40 x 3 5,69

90 x 40 x 4 7,39

90 x 45 x 3 5,90

90 x 50 x 3 6,16

90 x 50 x 4 • 8,02

90 x 50 x 5 9,70

90 x 70 x 3 7,10

90 x 70 x 4 9,28

90 x 70 x 5 11,30

90 x 90 x 3 8,04

90 x 90 x 4 • 10,50

90 x 90 x 5 12,80

100 x 20 x 2 • 3,64

100 x 20 x 3 5,22

100 x 30 x 2 3,95

100 x 30 x 3 5,69

100 x 40 x 2 • 4,26

100 x 40 x 3 • 6,16

100 x 40 x 4 • 8,02

100 x 40 x 5 9,70

100 x 50 x 2 4,58

100 x 50 x 3 • 6,63

100 x 50 x 4 • 8,65

100 x 50 x 5 • 10,50

100 x 60 x 2 4,89

100 x 60 x 3 • 7,10

100 x 60 x 4 • 9,28

100 x 60 x 5 • 11,30

100 x 80 x 3 8,04

100 x 80 x 4 • 10,50

100 x 80 x 5 12,80

100 x 100 x 2 6,15

100 x 100 x 3 • 8,99

100 x 100 x 4 • 11,80

100 x 100 x 5 • 14,40

110 x 70 x 3 8,04

110 x 70 x 4 10,50

110 x 70 x 5 12,80

120 x 30 x 2 4,58

120 x 30 x 3 6,63

120 x 40 x 2 4,89

120 x 40 x 3 • 7,10

120 x 40 x 4 9,28

120 x 40 x 5 11,30

120 x 50 x 3 7,72

120 x 50 x 4 9,95

120 x 50 x 5 12,30

120 x 60 x 3 • 8,04

120 x 60 x 4 • 10,50

120 x 60 x 5 • 12,80

120 x 80 x 3 • 8,99

120 x 80 x 4 • 11,80

120 x 80 x 5 • 14,40

120 x 100 x 4 12,88

120 x 100 x 5 15,81


Hydraulic Tubes

O.D W.T. I.D. Grade kg/m

4 x 0,5 3 St37.4 0,043

6 x 1 4 St37.4 0,123

1,5 3 St37.4 0,166

2 2 St37.4 0,197

2,25 1,5 St37.4 0,208

7 x 1,5 4 St37.4 0,203

8 x 1 6 St37.4 0,173

1,5 5 St37.4 0,240

10 x 1 8 St37.4 0,222

1,5 7 St37.4 0,314

2 6 St37.4 0,395

2,5 5 St37.4 0,462

12 x 1 10 St37.4 0,271

1,5 9 St37.4 0,388

2 8 St37.4 0,493

14 x 1 12 St37.4 0,321

1,5 11 St37.4 0,462

2 10 St37.4 0,592

2,5 9 St37.4 0,709

15 x 1 13 St37.4 0,345

1,5 12 St37.4 0,499

2 11 St37.4 0,641

2,5 10 St37.4 0,771

3 9 St37.4 0,888

16 x 1 14 St37.4 0,370

1,5 13 St37.4 0,536

2 12 St37.4 0,691

2,5 11 St37.4 0,832

3 10 St37.4 0,962

18 x 1 16 St37.4 0,419

1,5 15 St37.4 0,610

2 14 St37.4 0,789

2,5 13 St37.4 0,956

3 12 St37.4 ####

20 x 1,5 17 St37.4 0,684

2 16 St37.4 0,888

2,5 15 St37.4 ####

O.D W.T. I.D. Grade kg/m

20 x 3 14 St37.4 1,258

4 12 St37.4 1,578

22 x 1 20 St37.4 0,518

1,5 19 St37.4 0,758

2 18 St37.4 0,986

2,5 17 St37.4 0,758

3 16 St37.4 0,986

3,5 15 St37.4 1,597

24 x 1 22 St37.4 0,567

2 20 St37.4 1,085

25 x 1,5 22 St37.4 0,869

2 21 St37.4 1,134

2,5 20 St37.4 1,387

3 19 St37.4 1,628

4 17 St37.4 2,072

28 x 1,5 25 St37.4 0,980

2 24 St37.4 1,282

2,5 23 St37.4 1,572

3 22 St37.4 1,854

30 x 1,5 27 St37.4 1,054

2 26 St37.4 1,381

2,5 25 St37.4 1,695

3 24 St37.4 1,998

4 22 St37.4 2,565

32 x 2,5 27 St37.4 1,819

3 26 St37.4 2,146

35 x 2 31 St37.4 1,628

2,5 30 St37.4 2,004

3 29 St37.4 2,367

38 x 2,5 33 St37.4 2,189

3 32 St37.4 2,589

4 30 St37.4 3,354

5 28 St37,4 4,069

42 x 2 38 St37,4 1,973

3 36 St37,4 2,885

5 32 St37,4 4,562

50 x 6 38 St37,4 6,511


ANSI B 36.19Stainless Steel Pipe Sizes and Weights

Con

vers

ion

Fact

or F

or T

ypes

347

, 347

H, 3

48, 3

48H

x

1.01

4 C

onve

rsio

n Fa

ctor

For

Inco

loy

800

x 1.

014

Con

vers

ion

Fact

or F

or In

colo

y 82

5x

1.02

8C

onve

rsio

n Fa

ctor

For

Inco

nel 6

00x

1.06

3Con

vers

ion

Fact

or F

or H

aste

lloy

Bx

1.16

8C

onve

rsio

n Fa

ctor

For

Has

tello

y C

x 1.

129

Nom

inal

Dim

ensi

ons

of 1

/8 to

12"

in S

ched

uel 5

S, 1

0S, 4

0S, &

80S

are

per

ASA

B 36

.19-

1965

.

1/8

0,40

510

,30,

049

1,24

0,18

800,

2798

0,06

81,

70,

2470

0,36

760,

095

2,4

0,31

750,

4725

1/4

0,54

013

,70,

065

1,7

0,33

280,

4953

0,08

82,

20,

4287

0,63

800,

119

3,0

0,54

010,

8038

3/8

0,67

517

,10,

065

1,7

0,42

740,

6361

0,09

12,

30,

5729

0,85

260,

126

3,2

0,74

571,

1097

1/2

0,84

021

,30,

065

1,7

0,54

300,

8081

0,08

32,

10,

6773

1,00

790,

109

2,8

0,85

891,

2782

0,14

73,

71,

098

1,63

403/

41,

050

26,7

0,06

51,

70,

6902

1,02

710,

083

2,1

0,86

521,

2876

0,11

32,

91,

141

1,69

800,

154

3,9

1,48

72,

2129

1

1,31

533

,40,

065

1,7

0,87

591,

3035

0,10

92,

81,

4170

2,10

870,

133

3,4

1,69

52,

5225

0,17

94,

52,

192

3,26

211

1/4

1,66

042

,20,

065

1,7

1,11

71,

6623

0,10

92,

81,

8220

2,71

150,

140

3,6

2,29

43,

4139

0,19

14,

83,

025

4,50

171

1/2

1,90

048

,30,

065

1,7

1,28

61,

9138

0,10

92,

82,

1040

3,13

110,

145

3,7

2,74

34,

0821

0,20

05,

13,

665

5,45

412

2,

375

60,3

0,06

51,

71,

619

2,40

930,

109

2,8

2,66

203,

9615

0,15

43,

93,

687

5,48

690,

218

5,5

5,06

97,

5435

2 1/

22,

875

73,0

0,08

32,

12,

498

3,71

740,

120

3,05

3,56

405,

3038

0,20

35,

25,

847

8,70

130,

276

7,0

7,73

311

,508

03

3,

500

88,9

0,08

32,

13,

057

4,54

930,

120

3,05

4,37

206,

5063

0,21

65,

57,

647

11,3

80,

300

7,6

10,3

515

,402

53

1/2

4,00

010

1,6

0,08

32,

13,

505

5,21

600,

120

3,05

5,01

907,

4691

0,22

65,

79,

194

13,6

822

0,31

88,

0812

,62

18,7

806

4

4,50

011

4,3

0,08

32,

13,

952

5,88

120,

120

3,05

5,66

608,

4320

0,23

76,

010

,89

16,2

061

0,33

78,

615

,12

22,5

011

5

5,56

314

1,3

0,10

92,

86,

409

9,53

760,

134

3,4

7,84

1911

,670

20,

258

6,6

14,7

521

,950

40,

375

9,5

20,9

731

,206

86

6,

625

168,

30,

109

2,8

7,65

611

,393

40,

134

3,4

9,37

5913

,953

00,

280

7,1

19,1

528

,498

30,

432

11,0

28,8

442

,918

78

8,

625

219,

10,

109

2,8

10,0

1014

,896

50,

148

3,8

13,5

199

20,1

200

0,32

28,

228

,82

42,8

889

0,50

012

,743

,79

65,1

667

10

10

,750

273,

00,

134

3,4

15,3

4022

,828

50,

165

4,2

18,8

298

28,0

221

0,36

59,

340

,86

60,8

064

0,50

012

,755

,25

82,2

211

12

12

,750

323,

80,

156

4,0

21,1

8031

,519

30,

180

4,6

24,3

897

36,2

963

0,37

59,

550

,03

74,4

529

0,50

012

,766

,03

98,2

635

14

14

,000

355,

60,

156

4,0

23,2

8034

,644

50,

188

4,8

27,9

897

41,6

537

16

16

,000

406,

40,

165

4,2

28,1

7041

,921

60,

188

4,8

32,0

497

47,6

957

18

18

,000

457,

20,

165

4,2

31,7

2047

,204

60,

188

4,8

36,0

996

53,7

227

20

20

,000

508,

00,

188

4,8

40,1

5059

,749

80,

218

5,5

46,4

896

69,1

848

22

22

,000

558,

80,

188

4,8

44,2

1065

,791

70,

218

5,5

51,1

895

76,1

791

24

24

,000

609,

60,

218

5,5

55,8

9083

,173

50,

250

6,4

64,0

094

95,2

574

30

30

,000

762,

00,

250

6,4

80,1

8011

9,32

100,

312

7,9

99,8

490

148,

5932

Nom

inal

I.P.S

.di

amet

er

(inch

)

Out

side

dia

inch

mm

Sche

dule

5S

Wal

lth.

Wei

ght

inch

mm

lbs/

ftkg

/m

Sche

dule

10S

Wal

lth.

Wei

ght

inch

mm

lbs/

ftkg

/m

Sche

dule

40S

Wal

lth.

Wei

ght

inch

mm

lbs/

ftkg

/m

Sche

dule

80S

Wal

lth.

Wei

ght

inch

mm

lbs/

ftkg

/m


JIS Japan Sizes G 3459

Dimensions and Weight of Stainless Steel Pipe

6

1/8

10,5

1,0

0,23

41,

20,

275

1,5

0,33

31,

70,

369

2,4

0,47

9-

--

-

8

1/4

13,8

1,2

0,37

31,

650,

494

2,0

0,58

22,

20,

629

3,0

0,79

9-

--

-

10

3/

817

,31,

20,

476

1,65

0,63

72,

00,

755

2,3

0,85

13,

21,

11-

--

-

15

1/

221

,71,

650,

816

2,1

1,02

2,5

1,18

2,8

1,31

3,7

1,64

--

4,7

1,97

20

3/

427

,21,

651,

042,

11,

302,

51,

522,

91,

743,

92,

24-

-5,

52,

94

25

1

34

,01,

651,

322,

82,

153,

02,

293,

42,

574,

53,

27-

-6,

44,

36

32

1

1/4

42,7

1,65

1,67

2,8

2,76

3,0

2,94

3,6

3,47

4,9

4,57

--

6,4

5,73

40

1

1/2

48,6

1,65

1,91

2,8

3,16

3,0

3,37

3,7

4,10

5,1

5,47

--

7,1

7,29

50

2

60

,51,

652,

392,

83,

983,

54,

923,

95,

445,

57,

46-

-8,

711

,1

65

2

1/2

76,3

2,1

3,84

3,0

5,42

3,5

6,28

5,2

9,12

7,0

12,0

--

9,5

15,6

80

3

89

,12,

14,

513,

06,

374,

08,

395,

511

,37,

615

,3-

-11

,121

,4

90

3

1/2

101,

62,

15,

153,

07,

294,

09,

635,

713

,58,

118

,7-

-12

,727

,8

100

4

11

4,3

2,1

5,81

3,0

8,23

4,0

10,9

6,0

16,0

8,6

22,4

11,1

28,2

13,5

33,6

125

5

13

9,8

2,8

9,46

3,4

11,4

05,

016

,66,

621

,79,

530

,512

,739

,815

,948

,6

150

6

16

5,2

2,8

11,2

3,4

13,6

05,

019

,87,

127

,711

,041

,814

,353

,218

,266

,0

200

8

21

6,3

2,8

14,7

4,0

20,9

06,

533

,68,

242

,112

,763

,818

,288

,923

,011

0

250

10

267,

43,

422

,14,

026

,00

6,5

41,8

9,3

59,2

15,1

93,9

21,4

130

28,6

168

300

12

318,

54,

031

,04,

534

,80

6,5

50,0

10,3

78,3

17,4

129

25,4

184

33,3

234

Des

igna

tion

of d

iam

eter

(A)

(B)

Out

side

diam

eter

mm

Wal

lth

ickn

ess

mm

Wei

ght

kg/m

Wal

lth

ickn

ess

mm

Wei

ght

kg/m

Wal

lth

ickn

ess

mm

Wei

ght

kg/m

Wal

lth

ickn

ess

mm

Wei

ght

kg/m

Wal

lth

ickn

ess

mm

Wei

ght

kg/m

Wal

lth

ickn

ess

mm

Wei

ght

kg/m

Wal

lth

ickn

ess

mm

Wei

ght

kg/m

Des

igna

tion

of w

all t

hick

ness

Sche

dult

5SSc

hedu

le 1

0SSc

hedu

le 2

0SSc

hedu

le 4

0Sc

hedu

le 8

0Sc

hedu

le 1

20Sc

hedu

le 1

60


Stainless Steel Tubes seamless

size weight size weight size weight size weight

mm kg/m mm kg/m mm kg/m mm kg/m

4,00 x 1,00 0,075

5,00 x 1,00 0,100

6,00 x 0,50 0,069x 1,00 0,125x 1,50 0,169x 2,00 0,200

8,00 x 0,50 0,094x 1,00 0,175x 1,50 0,244x 2,00 0,300

10,00 x 1,00 0,225x 1,50 0,319x 2,00 0,401x 2,50 0,470

12,00 x 1,00 0,275x 1,50 0,394x 2,00 0,501

13,50 x 1,60 0,447x 2,00 0,576x 2,35 0,656

14,00 x 1,00 0,326x 1,50 0,470x 2,00 0,601x 2,50 0,720x 3,00 0,826

15,00 x 1,00 0,351x 1,50 0,507x 2,00 0,651

16,00 x 1,00 0,376x 1,50 0,545x 2,00 0,701x 2,50 0,845x 3,00 0,977

17,20 x 1,60 0,625x 2,00 0,761x 2,30 0,874x 2,90 1,038

18,00 x 1,00 0,426x 1,50 0,620x 2,00 0,801

20,00 x 1,00 0,476x 1,50 2,695x 2,00 0,901x 2,50 1,096x 3,00 1,377

x 4,00 1,603x 5,00 1,878

21,30 x 1,60 0,789x 2,00 0,967x 2,65 1,238x 2,90 1,936x 3,20 1,450

22,00 x 1,00 0,526x 1,50 0,770x 2,00 1,002x 3,00 1,427x 4,00 1,803

25,00 x 1,00 0,601x 1,50 0,883x 2,00 1,152x 2,50 1,409x 3,00 1,653x 4,00 2,070x 5,00 2,504

26,90 x 1,60 1,043x 2,00 1,247x 2,65 1,609x 3,20 1,889

28,00 x 1,00 0,767x 1,50 0,995x 2,00 1,302x 3,00 1,878

30,00 x 1,00 0,726x 1,50 1,070x 2,00 1,402x 2,60 1,784x 3,00 2,028x 4,00 2,604x 5,00 3,130

33,70 x 1,60 1,324x 2,00 1,588x 2,60 2,025x 2,90 2,237x 3,25 2,478x 3,60 2,713x 4,05 3,007x 4,50 3,290

35,00 x 1,50 1,258x 2,00 1,653x 2,50 2,035x 4,00 3,105

38,00 x 1,50 1,371x 2,00 1,803x 2,60 2,305x 3,00 2,629x 3,60 3,101x 4,00 3,405x 5,00 4,132

40,00 x 1,50 1,446x 2,00 1,903x 2,50 2,348x 3,00 2,779x 4,00 3,606x 5,00 4,382

42,40 x 1,60 1,635x 2,00 2,023x 2,60 2,591x 3,25 3,186x 4,05 3,889

44,50 x 2,00 2,128x 2,60 2,728x 2,90 3,021x 4,00 4,056

48,30 x 1,60 1,871x 2,00 2,319x 2,60 2,975x 3,25 3,666x 4,05 4,487

50,00 x 2,00 2,404x 2,50 2,974x 3,00 3,531x 5,00 5,634

51,00 x 2,00 2,454x 2,60 3,151

54,00 x 2,00 2,604

57,00 x 2,60 3,542x 2,90 3,929

60,00 x 5,00 6,886

60,30 x 1,60 2,352x 2,00 2,920x 2,60 3,757x 2,90 4,168x 3,20 4,575x 3,65 5,178x 4,50 6,288

70,00 x 2,00 3,405x 2,90 4,878x 4,00 6,611x 5,00 8,138

76,10 x 2,00 3,711x 2,60 4,785x 2,90 5,315x 3,65 6,622x 4,00 7,222x 4,50 8,068x 6,30 11,011

80,00 x 5,00 9,390

88,90 x 2,00 4,352x 2,60 5,618x 2,90 6,245x 3,20 6,867x 3,60 7,689x 4,05 8,605x 4,05 9,510x 6,30 13,030x 7,62 15,509

90,00 x 5,00 10,642

101,60 x 3,60 8,834x 4,05 9,893x 5,74 13,778

108,00 x 2,90 7,632x 3,20 8,397x 3,60 9,411x 4,00 10,417x 5,00 12,836

114,30 x 2,60 7,272x 3,05 8,496x 3,20 8,902x 3,60 9,979x 4,50 12,372x 6,02 16,322

133,00 x 4,00 12,921

139,70 x 4,00 13,592

159,00 x 4,50 17,409

168,30 x 5,00 20,445x 7,11 28,690

219,10 x 6,30 33,570x 8,18 43,200x 12,70 66,020

Material-No. 1.4301, 1.4541, 1.4571 seamless DIN 17456/17458 Tol. acc. DIN 2462


Stainless Steel Tubes welded

size weight size weight size weight size weight

mm kg/m mm kg/m mm kg/m mm kg/m

6 x 1,00 0,125

8 x 1,00 0,175

10 x 1,00 0,225

12 x 1,00 0,275x 1,50 0,394

14 x 1,00 0,326

15 x 1,00 0,351x 1,50 0,508

16 x 1,00 0,376x 1,50 0,545

17 x 1,00 0,401

18 x 1,00 0,426x 1,50 0,620

20 x 1,00 0,476x 1,50 0,695x 2,00 0,901

21,3 x 1,60 0,789x 2,00 0,967x 2,65 1,238

22 x 1,50 0,770

23 x 1,50 0,808

25 x 1,50 0,883x 2,00 1,152

26,9 x 1,60 1,014x 2,00 1,247x 2,65 1,609

28 x 1,50 0,995

30 x 1,50 1,070x 2,00 1,402x 2,60 1,784

32 x 1,50 1,146x 2,00 1,502

33 x 1,50 1,183

33,7 x 1,60 1,286x 2,00 1,588x 2,60 2,025x 3,25 2,478

35 x 1,50 1,258

36 x 2,00 1,703

38 x 1,50 1,371x 2,00 1,803x 2,60 2,305

40 x 1,50 1,446x 2,00 1,903

42,4 x 1,60 1,635x 2,00 2,023x 2,60 2,591x 3,25 3,186

43 x 1,50 1,559

44,5 x 2,00 2,128x 2,60 2,728

48,3 x 1,60 1,871x 2,00 2,319x 2,60 2,975x 3,25 3,666

50 x 2,00 2,404

51 x 1,50 1,859x 2,00 2,454

53 x 1,50 1,934

54 x 2,00 2,604

57 x 2,00 2,754x 2,60 3,542x 2,90 3,929

60,3 x 1,60 2,352x 2,00 2,920x 2,60 3,757x 2,90 4,168x 3,65 5,178

63,5 x 2,00 3,080

68 x 1,50 2,498

69 x 2,00 3,355

70 x 2,00 3,405x 2,90 4,873

76,1 x 1,60 2,985x 2,00 3,711x 2,30 4,250x 2,60 4,785x 2,90 5,315x 3,65 6,622

83 x 1,50 3,061

84 x 2,00 4,106

88,9 x 2,00 4,352x 2,30 4,987x 2,60 5,618x 2,90 6,245x 3,20 6,867

101,6 x 2,00 4,988

103 x 1,50 3,812

104 x 2,00 5,108

108 x 2,00 5,308x 2,60 6,862x 2,90 7,632x 4,00 10,417

114,3 x 2,00 5,624x 2,60 7,272x 2,90 8,089x 3,60 9,979

128 x 1,50 4,751

129 x 2,00 6,360

133 x 2,00 6,560x 2,60 8,490x 3,00 9,766x 4,00 12,921

139,7 x 2,00 6,896x 2,60 8,926x 2,90 9,934

153 x 1,50 5,690

154 x 2,00 7,612

159 x 2,00 7,863x 2,60 10,182x 3,00 11,719x 4,00 15,525

168,3 x 2,00 8,328x 2,60 10,788x 3,00 12,417x 4,00 16,456x 5,00 20,445

204 x 2,00 10,116

216 x 3,00 16,001

219,1 x 2,00 10,872x 2,60 14,095x 2,90 15,700x 4,00 21,544x 5,00 26,805

254 x 2,00 12,620

273 x 3,00 20,282x 4,00 26,943x 5,00 33,554

304 x 2,00 15,124

306 x 3,00 22,761

323,9 x 3,00 24,106x 4,00 32,041

355,6 x 3,00 26,487

406,4 x 3,00 30,303

508 x 4,00 50,481

size weight size weight

mm kg/m mm kg/m

18 x 1,00 0,426

22 x 1,00 0,526x 1,50 0,770

28 x 1,00 0,676x 1,50 0,995

34 x 1,00 0,826x 1,50 1,221

40 x 1,00 0,977

40 x 1,50 1,446

52 x 1,00 1,277x 1,50 1,897

70 x 2,00 3,405

85 x 2,00 4,157

104 x 2,00 5,108

129 x 2,00 6,360

154 x 2,00 7,612

Material-No. 1.4301, 1.4541, 1.4571 welded DIN 17455/17457 Tol. acc. DIN 2463

Longitudinally stainless steel tubes, Material 1.4301 and 1.4541 acc. DIN 11850/DIN

17455 with hammered inner and outer welds.

Execution: annealed, in- and outside pickled

not annealed, in- and outside pickled

outside fine-grinded, inside pickled


Condenser & Heatexchanger Tubes Carbon Alloy SteelPrincipal Inch Sizes and its mm Equivalents

SWG SWG BWG BWG SWG SWG BWG BWG SWG SWG BWG BWG SWG SWG BWG BWG SWG SWG BWGM/W A/W M/W A/W M/W A/W M/W A/W M/W A/W M/W A/W M/W A/W M/W A/W M/W A/W M/Wmm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

25,00 25,00 25,00 25,00 23,00 23,00 23,00 23,00 22,00 22,00 22,00 22,00 21,00 21,00 21,00 21,00 20,00 20,00 20,000,508 0,508 0,507 0,507 0,610 0,610 0,634 0,634 0,711 0,711 0,711 0,711 0,813 0,813 0,812 0,812 0,914 0,914 0,889

WTOD

3/16"4.76 mm1/4"6.35 mm 3/8"9.53 mm1/2"12.7mm5/8"15,88 mm3/4"19,05 mm7/8"22,2 mm1"25.4 mm1 1/16"26,99 mm1 1/8"28,58 mm1 1/4"31.75 mm1 1/2"38,1 mm1 3/4"44.45 mm2"50.8 mm2 1/4"57.15 mm2 1/2"63.5 mm2 3/4"69.85 mm3"76,2 mm

0,058 0,053 0,058 0,053 0,068 0,062 0,075 0,065 0,077 0,071 0,077 0,071 0,086 0,079 0,086 0,079 0,094 0,087 0,092

0,080 0,073 0,080 0,073 0,095 0,086 0,098 0,089 0,108 0,099 0,108 0,099 0,121 0,111 0,121 0,111 0,133 0,123 0,131

0,125 0,113 0,125 0,113 0,148 0,134 0,153 0,139 0,170 0,155 0,170 0,155 0,192 0,175 0,192 0,175 0,213 0,194 0,208

0,169 0,153 0,169 0,152 0,201 0,182 0,208 0,189 0,232 0,210 0,232 0,210 0,262 0,238 0,262 0,238 0,292 0,266 0,285

0,372 0,337 0,362

0,451 0,409 0,440

SWG SWG BWG BWG SWG SWG BWG BWG SWG SWG BWG BWG SWG SWG BWG BWG SWG SWG BWGM/W A/W M/W A/W M/W A/W M/W A/W M/W A/W M/W A/W M/W A/W M/W A/W M/W A/W M/Wmm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

13,00 13,00 13,00 13,00 12,00 12,00 12,00 12,00 11,00 11,00 11,00 11,00 10,00 10,00 10,00 10,00 9,00 9,00 9,002,337 2,337 2,413 2,413 2,642 2,642 2,768 2,768 2,947 2,947 3,048 3,048 3,251 3,251 3,403 3,403 3,658 3,658 3,760

WTOD

1/2"12,7 mm5/8"15,88 mm 3/4"19,05 mm7/8"22,2 mm1"25,4 mm1 1/16"26,99 mm1 1/8"28,58 mm1 1/4"31,75 mm1 1/2"38,1 mm1 3/4"44,45 mm2"50,8 mm2 1/4"57,15 mm2 1/2"63,5 mm2"50.8 mm2 3/4"69,85 mm3"76,2 mm3 1/4"82,55 mm3 1/2"95,25 mm4"101,6 mm

0,647 0,597 0,662 0,612 0,706 0,655 0,729 0,678

0,850 0,780 0,872 0,801 0,936 0,862 0,970 0,895

1,053 0,962 1,082 0,990 1,165 1,069 1,210 1,111

1,255 1,146 1,290 1,179 1,394 1,276 1,450 1,328 1,523 1,401 1,523 1,441 1,657 1,521 1,579

1,459 1,329 1,502 1,368 1,624 1,483 1,691 1,545 1,780 1,632 1,835 1,680 1,940 1,776 2,014 1,846 2,137 1,961

1,561 1,421 1,607 1,463 1,742 1,586 1,814 1,654 1,915 1,747 1,972 1,800 2,083 1,903 2,165 1,980 2,298 2,105

1,660 1,512 1,710 1,557 1,854 1,690 1,933 1,763 2,041 1,862 2,101 1,919 2,223 2,030 2,310 2,112 2,455 2,248

1,865 1,695 1,921 1,764 2,082 1,897 2,171 1,979 2,290 2,093 2,365 2,157 2,505 2,285 2,607 2,379 2,772 2,534 2,836

2,268 2,061 2,341 2,124 2,541 2,310 2,656 2,412 2,801 2,555 2,894 2,635 3,071 2,794 3,199 2,912 3,408 3,107 3,489

2,676 2,427 2,759 2,502 3,003 2,724 3,137 2,845 3,311 3,015 3,423 3,112 3,636 3,303 3,791 3,445 4,044 3,680 4,142

3,084 2,793 3,180 2,879 3,461 3,138 3,619 3,279 3,822 3,478 3,953 3,589 4,201 3,812 4,380 3,978 4,680 4,253 4,795

3,490 3,159 3,596 3,256 3,920 3,551 4,098 3,712 4,332 3,939 4,482 4,066 4,765 4,321 4,975 4,510 4,332 3,939 5,450

3,896 3,525 4,020 3,635 4,379 3,965 4,582 4,146 4,843 4,401 5,011 4,544 5,332 4,830 5,567 5,044 5,951 5,398 6,101

4,302 3,891 4,436 4,013 4,838 4,379 5,060 4,580 5,353 4,862 5,541 5,021 5,897 5,339 6,159 5,576 6,587 5,971 6,757

4,708 4,257 4,859 4,391 5,297 4,792 5,545 5,013 5,864 5,323 6,070 5,499 6,462 5,848 6,751 6,109 7,223 6,544 7,411

5,115 4,623 5,278 4,768 5,757 5,206 6,023 5,446 6,394 5,785 6,599 5,976 7,027 6,356 7,343 6,642 7,858 7,116 8,064

5,521 4,989 5,698 5,145 6,216 5,620 6,504 5,879 6,885 6,246 7,129 6,453 7,593 6,866 7,935 7,175 8,494 7,689 8,713

6,675 6,034 6,985 6,313 7,395 6,708 7,657 6,930 8,158 7,375 8,526 7,708 9,130 8,262 9,370

M/W minimum wall A/W average wall


Condenser & Heatexchanger Tubes Carbon Alloy SteelPrincipal Inch Sizes and its mm Equivalents

SWG SWG BWG BWG SWG SWG BWG BWG SWG SWG BWG BWG SWG SWG BWG BWG SWG SWG BWGA/W M/W A/W M/W A/W M/W A/W M/W A/W M/W A/W M/W A/W M/W A/W M/W A/W M/W A/Wmm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

19 19 19 18 18 18 18 16 16 16 16 15 15 15 15 14 14 14 141,016 1,086 1,086 1,219 1,219 1,244 1,244 1,626 1,626 1,651 1,651 1,829 1,829 1,828 1,828 2,032 2,032 2,108 2,108

WTOD

3/16"4,76 mm1/4"6,35 mm 3/8"0,53 mm1/2"12,7mm5/8"15,88 mm3/4"19,05 mm7/8"22,2 mm1"25,4 mm1 1/16"26,99 mm1 1/8"28,58 mm1 1/4"31,75 mm1 1/2"38,1 mm1 3/4"44,45 mm2"50,8 mm2 1/4"57,15 mm2 1/2"63,5 mm2 3/4"69,85 mm3"76,2 mm

SWG SWG BWG BWG SWG SWG BWGA/W M/W A/W M/W A/W M/W A/Wmm mm mm mm mm mm mm

8 8 8 7 7 7 740,64 4,191 4,191 4,471 4,471 4,572 4,572

WTOD

1/2"12,7 mm5/8"15,88 mm 3/4"19,05 mm7/8"22,2 mm1"25,4 mm1 1/16"26,99 mm1 1/8"28,58 mm1 1/4"31,75 mm1 1/2"38,1 mm1 3/4"44,45 mm2"50,8 mm2 1/4"57,15 mm2 1/2"63,5 mm2"50.8 mm2 3/4"69,85 mm3"76,2 mm3 1/4"82,55 mm3 1/2"88,9 mm4"101,6 mm

2,137 2,192

2,775 3,108 2,848

3,411 3,836 3,505 4,055 3,708 4,133 3,780

4,047 4,564 4,161 4,833 4,408 4,928 4,496

4,684 5,292 4,817 5,610 5,108 5,717 5,212

5,320 6,022 5,473 6,387 5,808 6,517 5,928

5,957 6,751 6,130 7,164 6,508 7,312 6,644

6,593 7,479 6,786 7,941 7,208 8,106 7,36

7,229 8,208 7,442 8,718 7,908 8,901 8,076

7,866 8,933 8,098 9,496 8,608 9,696 8,792

8,502 9,661 8,755 10,273 9,308 10,491 9,508

9,138 10,393 9,411 11,050 10,009 11,285 10,223

9,775 11,122 10,066 11,827 10,709 12,080 10,939

0,094 0,106 0,089

0,134 0,153 0,141 0,167 0,154 0,169 0,157 0,202 0,189 0,204 0,191 0,216 0,204 0,216 0,204

0,213 0,247 0,226 0,273 0,250 0,278 0,254 0,344 0,317 0,348 0,321 0,375 0,347 0,375 0,347

0,293 0,342 0,311 0,379 0,345 0,385 0,351 0,485 0,444 0,491 0,450 0,534 0,490 0,534 0,490 0,581 0,536 0,599 0,551

0,372 0,436 0,396 0,485 0,441 0,494 0,449 0,626 0,572 0,635 0,579 0,693 0,634 0,693 0,633 0,758 0,694 0,781 0,716

0,452 0,530 0,481 0,590 0,536 0,601 0,545 0,766 0,698 0,779 0,709 0,852 0,777 0,852 0,777 0,936 0,853 0,964 0,881

0,696 0,631 0,709 0,643 0,909 0,826 0,919 0,836 1,010 0,919 1,009 0,918 1,112 1,012 1,147 1,045

0,802 0,726 0,817 0,714 1,048 0,953 1,068 0,970 1,170 1,063 1,169 1,063 1,290 1,171 1,331 1,211

1,121 1,017 1,137 1,032 1,251 1,135 1,250 1,134 1,377 1,251 1,424 1,294

1,193 1,081 1,210 1,097 1,331 1,207 1,329 1,206 1,466 1,330 1,514 1,376

1,333 1,208 1,350 1,225 1,487 1,349 1,487 1,349 1,644 1,489 1,697 1,541

1,615 1,462 1,637 1,483 1,805 1,636 1,805 1,636 1,998 1,807 2,064 1,871

2,351 2,126 2,430 2,201

2,704 2,444 2,796 2,531

3,054 2,762 3,163 2,861

3,407 3,080 3,529 3,192

3,761 3,399 3,896 3,522

4,121 3,716 4,262 3,852

Wigts in kg/meter


Stainless Steel Condenser & Heatexchanger TubesPrincipal Inch Sizes SWG Weights (for minimum wall spec. as A213/249/179/214 add 10%)

Outside diameter

inches mm

SWG gauge wall-thickness

22 20 18 16 14 12 11 10in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm

0,028 0,711 0,36 0,914 0,048 1,218 0,064 1,625 0,080 2,032 0,104 2,641 0,116 2,946 0,128 3,251

lb/ft kg/m lb/ft kg/m lb/ft kg/m lb/ft kg/m lb/ft kg/m lb/ft kg/m lb/ft kg/m lb/ft kg/m

1/4“

6,350 0,083 0,124 0,105 0,157 0,129 0,192

5/16“

7,950 0,108 0,161 0,138 0,205 0,173 0,257

3/8“

9,525 0,132 0,197 0,170 0,253 0,216 0,321 0,256 0,381

1/2“

12,700 0,143 0,213 0,181 0,270 0,235 0,350 0,303 0,451 0,365 0,543 0,447 0,665 0,484 0,720

5/8“

15,875 0,181 0,270 0,230 0,342 0,300 0,447 0,390 0,580 0,473 0,704 0,588 0,875 0,641 0,954

3/4“

19,050 0,279 0,415 0,366 0,544 0,476 0,709 0,582 0,866 0,732 1,09 0,800 1,19 0,867 1,29

7/8“

22,225 0,257 0,383 0,328 0,488 0,431 0,641 0,563 0,838 0,692 1,03 0,874 1,30 0,954 1,42 1,040 1,55

1,00“

25,400 0,296 0,440 0,376 0,560 0,496 0,738 0,650 0,967 0,800 1,19 1,02 1,51 1,12 1,66 1,210 1,80

1,25“

31,750 0,372 0,553 0,474 0,706 0,626 0,931 0,827 1,23 1,020 1,51 1,30 1,93 1,43 2,13 1,560 2,32

1,5“

38,100 0,448 0,666 0,572 0,851 0,759 1,13 0,994 1,48 1,240 1,84 1,58 2,35 1,74 2,59 1,910 2,84

1,75“

44,450 0,523 0,779 0,669 0,996 0,887 1,32 1,170 1,74 1,450 2,16 1,86 2,77 2,06 3,06 2,250 3,35

2,00“

50,800 0,599 0,892 0,766 1,14 1,020 1,51 1,340 2,00 1,670 2,48 2,14 3,19 2,37 3,53 2,600 3,87

2,5“

63,500 1,280 1,90 1,690 2,52 2,100 3,13 2,71 4,03 3,00 4,47 3,300 4,91

3,00“

76,200 1,540 2,29 2,000 3,03 2,530 3,77 3,27 4,87 3,63 5,40 3,990 5,94

3,5“

88,900 1,790 2,67 2,390 3,55 2,970 4,42 3,83 5,70 4,26 6,34 4,680 6,97

4,00“

101,600 2,060 3,06 2,740 4,07 3,410 5,07 4,40 6,54 4,89 7,28 5,380 8,01


Stainless Steel Condenser & Heatexchanger TubesPrincipal Inch Sizes BWG Weights (for minimum wall spec. as A213/249/179/214 add 10%)

+ The values in pounds and kilograms shown in this table are based on weights of carbon steel.

Outside diameter BWG Birmingham wire gauce BWG

Fractions

in.

Decimals

in.

Millimeters 20 18 16 15 14 13 12 11 10in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm

0,35 0,889 0,049 1,245 0,065 1,654 0,072 1,829 0,083 2,108 0,095 2,413 0,109 2,769 0,120 3,048 0,134 3,40

lbs/ft kg/m lbs/ft kg/m lbs/ft kg/m lbs/ft kg/m lbs/ft kg/m lbs/ft kg/m lbs/ft kg/m lbs/ft kg/m lbs/ft kg/m

0,080 0,120 0,110 0,160 0,130 0,190

0,100 0,150 0,140 0,210 0,170 0,250 0,190 0,280

0,130 0,190 0,170 0,250 0,210 0,310 0,230 0,340 0,260 0,390

0,170 0,250 0,230 0,340 0,300 0,450 0,330 0,490 0,370 0,550 0,410 0,610 0,460 0,680 0,480 0,720

0,220 0,330 0,300 0,450 0,390 0,580 0,430 0,640 0,480 0,710 0,540 0,800 0,600 0,890 0,650 0,970

0,270 0,400 0,370 0,550 0,480 0,720 0,520 0,770 0,590 0,880 0,660 0,980 0,750 1,120 0,810 1,200 0,880 1,310

0,310 0,460 0,430 0,640 0,560 0,830 0,620 0,920 0,700 1,040 0,790 1,180 0,890 1,320 0,970 1,440 1,060 1,580

0,360 0,540 0,500 0,740 0,650 0,970 0,710 1,060 0,810 1,210 0,920 1,370 1,040 1,550 1,130 1,680 1,290 1,920

0,410 0,610 0,560 0,830 0,740 1,100 0,810 1,210 0,920 1,370 1,050 1,560 1,180 1,760 1,290 1,920 1,420 2,110

0,460 0,680 0,630 0,940 0,830 1,230 0,910 1,350 1,030 1,530 1,180 1,760 1,320 1,960 1,450 2,160 1,610 2,400

0,500 0,740 0,690 1,030 0,910 1,350 1,000 1,490 1,140 1,700 1,300 1,930 1,470 2,190 1,610 2,400 1,780 2,650

0,550 0,820 0,760 1,130 1,000 1,490 1,100 1,640 1,260 1,870 1,460 2,170 1,610 2,400 1,770 2,630 1,960 2,920

0,650 0,970 0,890 1,320 1,170 1,740 1,290 1,920 1,480 2,200 1,680 2,500 1,910 2,840 2,080 3,100 2,310 3,440

1,020 1,520 1,340 1,990 1,480 2,200 1,700 2,530 1,940 2,890 2,200 3,270 2,410 3,590 2,670 3,970

1,160 1,730 1,520 2,260 1,670 2,480 1,930 2,870 2,190 3,260 2,490 3,700 2,730 4,060 3,030 4,510

1,220 1,810 1,600 2,380 1,770 2,630 2,030 3,020 2,310 3,440 2,640 3,930 2,890 4,300 3,210 4,780

1,280 1,910 1,690 2,520 1,870 2,780 2,140 3,180 2,460 3,660 2,780 4,140 3,050 4,540 3,390 5,040

1,480 2,200 1,950 2,900 2,150 3,200 2,470 3,680 2,820 4,200 3,220 4,790 3,530 5,250 3,920 5,830

1,550 2,310 2,040 3,040 2,250 3,350 2,590 3,850 2,950 4,390 3,360 5,000 3,690 5,490 4,100 6,100

1,810 2,690 2,390 3,560 2,640 3,930 3,030 4,510 3,460 5,150 3,940 5,860 4,330 6,440 4,820 7,170

2,760 4,110 3,050 4,540 3,500 5,210 4,000 5,950 4,570 6,800 5,020 7,470 5,580 8,300

1/4“ 0,250 6,350

5/16“ 0,313 7,950

3/8“ 0,375 9,525

0,5“ 0,500 12,700

5/8“ 0,625 15,875

3/4“ 0,750 19,050

7/8“ 0,875 22,225

1“ 1,000 25,400

1,125“ 1,125 28,575

1,25“ 1,250 31,750

1,375“ 1,375 34,925

1,5“ 1,500 38,100

1,75“ 1,750 44,450

2“ 2,000 50,800

2,25“ 2,250 57,150

2,375“ 2,375 60,325

2,5“ 2,500 63,500

2,875“ 2,875 73,025

3“ 3,000 76,200

3,5“ 3,500 88,900

4“ 4,000 101,600


JIS Japan Sizes G 3463 - Dimensions and Weight ofStainless Steel Boiler and Heat Exchanger Tubes

O.D.

mmmm 1,2 1,6 2,0 2,3 2,6 2,9 3,2 3,5 4,0 4,5 5,0 5,5 6,0 6,5 7,0 8,0 9,5 11,0 12,5

Wall Thickness Unit: kg/m

15,9 0,435 0,564 0,686 0,771 0,853 0,930

19,0 0,527 0,687 0,838 0,947 1,050 1,150

21,7 0,607 0,793 0,972 1,100 1,220 1,340 1,460

25,4 0,716 0,939 1,150 1,310 1,460 1,610 1,750 1,890

27,2 0,769 1,010 1,240 1,410 1,580 1,740 1,890 2,050 2,290

31,8 0,905 1,190 1,470 1,670 1,870 2,070 2,260 2,440 2,740 3,030

34,0 1,280 1,580 1,800 2,010 2,220 2,430 2,630 2,960 3,270 3,580

38,1 1,440 1,780 2,030 2,280 2,520 2,750 2,990 3,360 3,730 4,080 4,420

42,7 2,010 2,290 2,570 2,850 3,120 3,380 3,820 4,240 4,650 5,050 5,430

45,0 2,120 2,420 2,720 3,010 3,300 3,580 4,040 4,490 4,930 5,360 5,770 6,170

48,6 2,300 2,630 2,950 3,270 3,580 3,890 4,400 4,890 5,380 5,850 6,300 6,750 7,180

50,8 2,410 2,750 3,090 3,430 3,760 4,080 4,620 5,140 5,650 6,140 6,630 7,100 7,560 8,440 9,680 10,800 11,800

54,0 2,560 2,930 3,300 3,650 4,010 4,360 4,930 5,490 6,040 6,580 7,100 7,630 8,110 9,070 10,400 11,700 12,800

57,1 2,720 3,110 3,490 3,880 4,250 4,630 5,240 5,840 6,420 7,000 7,560 8,110 8,650 9,690 11,600 12,500 13,700

60,3 2,880 3,290 3,700 4,100 4,510 4,900 5,550 6,190 6,820 7,430 8,030 8,620 9,200 10,300 11,900 13,400 14,700

63,5 3,470 3,900 4,330 4,760 5,180 5,870 6,550 7,210 7,870 8,510 9,140 9,750 10,900 12,700 14,200 15,700

65,0 3,560 4,000 4,440 4,880 5,310 6,020 6,710 7,400 8,070 8,700 9,380 10,000 11,200 13,000 14,600 16,200

70,0 3,840 4,320 4,800 5,270 5,740 6,510 7,270 8,010 8,750 9,470 10,200 10,900 12,200 14,200 16,000 17,700

76,2 4,190 4,720 5,240 5,760 6,270 7,120 7,960 8,780 9,590 10,400 11,200 11,900 13,500 15,600 17,700 19,600

82,6 6,270 6,830 7,750 8,670 9,570 10,500 11,300 12,200 13,000 14,700 17,100 19,400 21,600

88,9 6,760 7,370 8,370 9,370 10,300 11,300 12,300 13,200 14,100 16,000 18,600 21,100 23,600

101,6 8,470 9,630 10,800 11,900 13,000 14,100 15,200 16,300 18,500 21,600 24,600 27,500

114,3 10,900 12,200 13,500 14,800 16,000 17,300 18,500 21,000 24,600 28,000 31,400

127,0 12,100 13,600 15,000 16,500 17,900 19,300 20,700 23,500 27,500 31,500 35,300

139,8 18,200 19,800 21,400 22,900 26,000 30,500 34,900 39,200


Non-Ferrous Heatexchanger Tubes Weights & Dimensions for the most popular Sizes

SizeMaterial

Cu/Ni 90/10 - Cu/Ni 70/30

Min. Wall Aver. Wall

Material Aluminium Brass


Material Admiraltry Brass


Weight Factors (Cu/Ni + Brass) (Steel = 0.02466) Av min.1. Aluminium Brass (AI 687) 0,0262009 0,0265 0,02752. Admiralty Brass (AI 443) 0,0267978 0,0270 0,02813. Cu/Ni (AI 706) 0,0280859 0,0284 0,02954. Cu/Ni (AI 715) 0,0280859 0,0284 0,0295

Formula: (O.D.-WT) x WT x Weight Factor = kg/meterxs

3/4" x 12 BWG 1,338 1,280 1,248 1,194 1,275 1,21712 SWG 1,287 1,231 1,201 1,149 1,227 1,17013 BWG 1,192 1,140 1,112 1,064 1,136 1,08413 SWG 1,160 1,109 1,082 1,035 1,105 1,05514 BWG 1,060 1,014 0,989 0,946 1,011 0,96414 SWG 1,027 0,982 0,958 0,916 0,978 0,93415 BWG 0,935 0,894 0,872 0,834 0,891 0,85015 SWG 0,935 0,894 0,872 0,835 0,891 0,85016 BWG 0,853 0,816 0,796 0,761 0,813 0,77616 SWG 0,841 0,805 0,785 0,751 0,802 0,76518 BWG 0,658 0,629 0,614 0,587 0,627 0,59818 SWG 0,645 0,617 0,602 0,576 O,615 0,58719 BWG 0,579 0,554 0,540 0,517 0,552 0,52719 SWG 0,544 0,520 0,507 0,485 0,519 0,49520 BWG 0,479 0,458 0,447 0,428 0,457 0,43620 SWG 0,492 0,471 0,459 0,439 0,469 0,448

1 x 10 BWG 2,223 2,126 2,074 1,984 2,118 2,02110 SWG 2,138 2,045 1,995 1,908 2,038 1,94411 BWG 2,023 1,935 1,887 1,805 1,928 1,83911 SWG 1,965 1,879 1,833 1,753 1,873 1,78712 BWG 1,860 1,779 1,735 1,660 1,773 1,69112 SWG 1,785 1,708 1,666 1,593 1,702 1,62313 BWG 1,647 1,575 1,536 1,470 1,570 1,49813 SWG 1,601 1,531 1,493 1,428 1,525 1,45514 BWG 1,458 1,394 1,360 1,301 1,390 1,32614 SWG 1,410 1,349 1,315 1,258 1,344 1,28215 BWG 1,280 1,224 1,194 1,142 1,219 1,16315 SWG 1,280 1,224 1,194 1,142 1,220 1,16416 BWG 1,165 1,114 1,086 1,039 1,110 1,05916 SWG 1,148 1,098 1,071 1,024 1,094 1,04418 BWG 0,892 0,853 0,832 0,796 0,850 0,81118 SWG 0,875 0,837 0,817 0,781 0,834 0,79619 BWG 0,784 0,750 0,731 0,700 0,747 0,71319 SWG 0,736 0,704 0,686 0,657 0,701 0,66920 BWG 0,647 0,619 0,604 0,577 0,617 0,58820 SWG 0,665 0,636 0,620 0,593 0,633 0,604

10 x 1 mm 0,267 0,256 0,249 0,239 0,255 0,24312 x 1 mm 0,327 0,312 0,305 0,292 0,311 0,29712 x 1,5 mm 0,468 0,447 0,436 0,417 0,446 0,42514 x 1 mm 0,386 0,369 0,360 0,345 0,368 0,35114 x 1,5 mm 0,557 0,533 0,519 0,497 0,531 0,50616 x 1 mm 0,446 0,426 0,416 0,398 0,425 0,40516 x 1,5 mm 0,646 0,618 0,602 0,576 0,616 0,58718 x 1 mm 0,505 0,483 0,471 0,451 0,481 0,45918 x 1,5 mm 0,735 0,703 0,686 0,656 0,700 0,66820 x 2 mm 1,069 1,022 0,997 0,954 1,019 0,97220 x 2,5 mm 1,299 1,243 1,212 1,159 1,238 1,18122 x 2 mm 1,188 1,136 1,108 1,060 1,132 1,08022 x 2,5 mm 1,448 1,385 1,350 1,292 1,380 1,31625 x 2 mm 1,366 1,306 1,274 1,219 1,302 1,24225 x 2,5 mm 1,671 1,598 1,558 1,491 1,592 1,519


5/8” 18 SWG � 15,88 1,22

5/8” 16SWG � � � 15,88 1,63

3/4” 18SWG � � � 19,05 1,22

3/4” 16BWG � � � � � � ✖ ✖ � 19,05 1,65

3/4” 14BWG ✖ ✖ � ✖ � ✖ ✖ 19,05 2,11

3/4” 12BWG ✖ ✖ 19,05 2,77

3/4” 10BWG � 19,05 3,403

1” 14SWG � 25,40 2,03

1” 14BWG ✖ ✖ � � � 25,40 2,11

1” 13BWG � � 25,40 2,41

1” 12BWG ✖ ✖ ✖ � 25,40 2,77

1” 11BWG � � 25,40 3,048

1” 10BWG � 25,40 3,403

1” 9BWG � 25,40 3,76

1 1/4” 10BWG � 31,75 3,403

1 1/2” 10BWG � 38,10 3,403

20mm2 2,0mm ✖ ✖ 20,00 2,00

25mm2 2,5mm ✖ ✖ 25,00 2,50

TPS Stock range Heatexchanger TubesStock Sizes and Grades

x-marked items are always available

Tube OD Thickness ASTMA179

ST 35,8DIN 17175

A199T11

ASTM 1A213/

A199 T5

ASTMA 214

ASTM-A213TP304L TP316L TP321

ASTM-A249TP304 TP316L

ASTM-B111AL687 AL443 AL7063 AL7154

Tube ODin mm

Thicknessin mm

1Heat-treatment: Isothermal annealed 2Average Wallthickness 3CuNi 90/10 4CuNi70/30

- Certified acc. to ASME- Other sizes than mentioned above are shortly available from stock or new production.


Conversion Tables SWG-BWGMillimeter Equivalents of Wire and Sheet Metal Gauges

No.

Imperial Standard Wire GaugeI. W. G.S. W. G.

mm

Birmingham Wire GaugeB. W. G.

mm

American Brown & Sharpe Wire Gauge

mm

7/0 12,700

6/0 11,786

5/0 10,973

4/0 10,160 11,532 11,684

3/0 9,449 10,795 10,414

2/0 8,839 9,652 9,271

1/0 8,230 8,636 8,255

1 7,620 7,620 7,341

2 7,010 7,214 6,553

3 6,401 6,579 5,817

4 5,893 6,045 5,182

5 5,385 5,588 4,623

6 4,877 5,156 4,115

7 4,470 4,572 3,658

8 4,064 4,191 3,251

9 3,658 3,759 2,896

10 3,251 3,404 2,591

11 2,946 3,048 2,311

12 2,642 2,769 2,057

13 2,337 2,413 1,829

14 2,032 2,108 1,626

15 1,829 1,829 1,448

16 1,626 1,651 1,295

17 1,422 1,473 1,143

18 1,219 1,245 1,016

19 1,016 1,067 0,914

20 0,914 0,889 0,813

21 0,813 0,813 0,724

22 0,711 0,711 0,643

23 0,610 0,635 0,574

24 0,559 0,559 0,510

25 0,508 0,508 0,455

26 0,457 0,457 0,404

27 0,417 0,406 0,361

28 0,376 0,356 0,320

29 0,345 0,330 0,287

30 0,315 0,305 0,254


TECHNIFIN®®

Description of available types of TECHNIFIN®® Tubes

TECHNIFIN TYPE „G“The fin strip is wound into a mechanically producedgroove and tightened by backfilling of the base materialunder pressure. Groove depth 0,4 mm.Advantages: High fin stability, excellent heat transfer, highoperating temperature.

TECHNIFIN TYPE „L“, „KL“, „DL“The fin strip is shaped into a „L“ and wound onto the tubesurface under tension.Advantages: Core tube extensively protected against cor-rosion by the fin foot, finning of very thin-walled tubespossible.

TECHNIFIN TYPE „HY“A smooth core tube is inserted into an aluminium tube and then fins areextrudes out of the aluminium tube. Advantages: Bond ot outer and in-ner tube removes the risk of loss of contact due to thermal stress, finsare more rigid, also available as serrated type (TECHNIFIN „HYS“ seebelow.

TECHNIFIN TYPE „HYS“As per type „HY“, but fins are serrated. Advantages: Higher heat trans-fer coefficient, for same pressure drop compared with „HY“ fin.

TECHNIFIN TYPE „I“The fin strip is wound onto the base tube.Typical fin material: steel.

TECHNIFIN TYPE „N“The fins are rolled out of the wall of the plain tube. Tubeand fin are consisting of one piece.Advantages: Excellent heattransfer, good bending proper-ties, wide range of material can be used.

TECHNIFIN TYPE „M“Manufacturing and adavantages as described for type „N“but with higher fins.


TECHNIFIN®®

Description of available types of TECHNIFIN®® Tubes (continued)

TECHNIFIN TYPE „WO“The fin strip is wound spirally onto the tube and wel-ded continuously to the tube along the spiral root.Advantages: Strong connection between fin and basetube, prevents loosening of fin because of heat stress,oxidization, corrosion etc., use at very high temperatu-res possible.

TECHNIFIN TYPE „WOS“As per type „WO“, but fins are serrated.Advantages: Higher heat transfer coefficient. For thesame pressure drop compared with „WO“ fin.

TECHNIFIN TYPE „LFS“Extruded or drawn fin tube , seamless with two longi-tudinal opposite fins. Used in boiler wall constructions.

TECHNIFIN TYPE „LFW“I/L or U fins welded longitudinally onto the base tube.

TECHNIFIN TYPE „S“Square fins are welded onto a round base tube.

TECHNIFIN TYPE „Double S“Square fins are welded onto two round base tubes.

TECHNISTUD Steel studs are welded by a special process onto thebase tube.


TECHNIFIN®® Type "G"

MATERIAL COMBINATIONSCore TubeCarbon steels (ASTM A 179/ A 214, St 35.8,ect.), low-alloy steels, stain-less steels, copper-nickel alloys, aluminium bronze, copper, nickel-alloys(Alloy 400, etc.), bimetal

FinsAluminium / Steel / Galvanized Steel

FIELDS OF APPLICATION• the petroleum, chemical and petrochemical process industries• natural gas treatment• the steel industry: blast furnace and converter systems• power generation: steam turbine exhaust condensing

- contact condensing with cooling of circulating condensate- fossil and nuclear power plants

• air conditioning (freon, ammonia, propane)• incineration of household refuse• compressor coolers, ect.

MANUFACTURING PROCESSThe manufacturing tool is made up of 2 non-cutting plates set at 90° to the axis of the basetube.The first plate effects a groove for metal spinning. The second directs the ribbon in the groo-ve and sets the fin foot in the groove through pressure on the metal displaced for the groo-ve.A similar plate made of tungsten carbure allows us to manufacture G finned tubes with basetubes made of austenitic steel or exotic alloys.

ADVANTAGES1) ThermalThe fin/tube wall contact is constant because of the setting and makes it possible to use awall temperature of up to 400° C.

2) MechanicalThe fin is set throughout its length and consequently does not unwind even when partiallyuprooted.

L1 max. = 12 000 mm Fin Thickness = 0,3 - 0,4 mm Fa = Outer Tube Surface Area incl. Surface Area of Fins

L2 max. = L1 -2y x = acc. to clients specification Fi = Interior Tube Surface Area per Meter (m2/m)

Y max. = 4 x t FZR = Uncovered Tube Area between the fins


ORDER-No. s di Fins/in. Fa Fa/Fi Weight FZRmm mm t m*2*/m Kg/m m*2*/m

TECHNIFIN® G 1.2.51- 5 5 0,678 10,09 1,51 0,0234

TECHNIFIN® G 1.2.51- 6 6 0,798 11,87 1,58 0,0230

TECHNIFIN® G 1.2.51- 7 7 0,918 13,65 1,65 0,0226

TECHNIFIN® G 1.2.51- 8 2 21,4 8 1,037 15,43 1,72 0,0222

TECHNIFIN® G 1.2.51- 9 9 1,157 17,21 1,79 0,0218

TECHNIFIN® G 1.2.51-10 10 1,277 18,99 1,85 0,0214

TECHNIFIN® G 1.2.51-11 11 1,396 20,77 1,94 0,0210

TECHNIFIN® G 1.2,5.51- 5 5 0,678 10,58 1,76 0,0234

TECHNIFIN® G 1.2,5.51- 6 2,11 6 0,798 12,45 1,83 0,0230

TECHNIFIN® G 1.2,5.51- 7 (14 BWG) 7 0,918 14,32 1,90 0,0226

TECHNIFIN® G 1.2,5.51- 8 Min. Wall (20,4) 8 1,037 16,19 1,98 0,0222

TECHNIFIN® G 1.2,5.51- 9 -2,5 9 1,157 18,05 2,05 0,0218

TECHNIFIN® G 1.2,5.51-10 10 1,277 19,92 2,11 0,0214

TECHNIFIN® G 1.2,5.51-11 11 1,396 21,79 2,19 0,0210

TECHNIFIN® G 1.3.51- 5 5 0,678 11,13 2,01 0,0234

TECHNIFIN® G 1.3.51- 6 2,77 6 0,798 13,09 2,08 0,0230

TECHNIFIN® G 1.3.51- 7 (12 BWG) 7 0,918 15,06 2,15 0,0226

TECHNIFIN® G 1.3.51- 8 Min. Wall (19,4) 8 1,037 17,02 2,22 0,0222

TECHNIFIN® G 1.3.51- 9 -3,0 9 1,157 18,98 2,29 0,0218

TECHNIFIN® G 1.3.51-10 10 1,277 20,95 2,36 0,0214

TECHNIFIN® G 1.3.51-11 11 1,396 22,91 2,44 0,0210

TECHNIFIN® G 1.2.57- 5 5 0,885 13,16 1,65 0,0291

TECHNIFIN® G 1.2.57- 6 6 1,046 15,56 1,73 0,0286

TECHNIFIN® G 1.2.57- 7 7 1,207 17,95 1,82 0,0281

TECHNIFIN® G 1.2.57- 8 2 21,4 8 1,368 20,35 1,92 0,0276

TECHNIFIN® G 1.2.57- 9 9 1,529 22,74 2,01 0,0271

TECHNIFIN® G 1.2.57-10 10 1,690 25,14 2,11 0,0266

TECHNIFIN® G 1.2.57-11 11 1,851 27,53 2,20 0,0261

TECHNIFIN® G 1.2,5.57- 5 5 0,885 13,81 1,89 0,0291

TECHNIFIN® G 1.2,5.57- 6 2,11 6 1,046 16,32 1,99 0,0286

TECHNIFIN® G 1.2,5.57- 7 (14 BWG) 7 1,207 18,83 2,08 0,0281

TECHNIFIN® G 1.2,5.57- 8 Min. Wal) (20,4) 8 1,368 21,35 2,18 0,0276

TECHNIFIN® G 1.2,5.57- 9 -2,5 9 1,529 23,86 2,27 0,0271

TECHNIFIN® G 1.2,5.57- 10 10 1,690 26,37 2,37 0,0266

TECHNIFIN® G 1.2,5.57- 11 11 1,851 28,88 2,46 0,0261

TECHNIFIN® G 1.3.57- 5 5 0,885 14,42 2,14 0,0291

TECHNIFIN® G 1.3.57- 6 2,77 6 1,046 17,16 2,23 0,0286

TECHNIFIN® G 1.3.57- 7 (12 BWG) 7 1,207 19,80 2,33 0,0281

TECHNIFIN® G 1.3.57- 8 Min. Wall (19,4) 8 1,368 22,45 2,42 0,0276

TECHNIFIN® G 1.3.57- 9 -3,0 9 1,529 25,09 2,52 0,0271

TECHNIFIN® G 1.3.57-10 10 1,690 27,73 2,61 0,0266

TECHNIFIN® G 1.3.57-11 11 1,851 30,37 2,71 0,0261

Given weights are for steel tubes with Aluminium fins. Weight calculation for steel fins: Kg/m ~ weight of table + 0,1827 x fins per inch.

TECHNIFIN®® Type "G"Standard Size Range

D = 25,4 mm* DR = 50,8 mm + DR = 57 mm* on request, other core tube dimensions available


TECHNIFIN Type „L“, „KL“, „DL“

MATERIAL COMBINATIONSCore TubeCarbon steels (ASTM A 179/ A 214, St 35.8,ect.), low-alloy steels, stain-less steels, copper-nickel alloys, aluminium bronze, copper, nickel-alloys(Alloy 400, ext.), bimetal

FinsAluminium

FIELDS OF APPLICATION• the petroleum, chemical and petrochemical process industries• natural gas treatment• the steel industry: blast furnace and converter systems• power generation: steam turbine exhaust condensing

- contact condensing with cooling of circulating condensate- fossil and nuclear power plants

• air conditioning (freon, ammonia, propane)• incineration of household refuse• compressor coolers, ect.

MANUFACTURING PROCESSThe manufacturing strip is folded to from an L shape and then woundaround the base tube. The feet of the fins are joined together and coverthe whole of the finned surface. Both lends are clamped down to avoidunrolling through damage.

ADVANTAGESEconomicThis method of manufacturing enables us to place the finning on a verythin-walled tube with is particularly desirable when using noble alloys(titanium, stainless, copper, nickel).The tube can withstand a temperature of up to 130°C without the risk ofatmospheric corrosion or thermal stress.

L1 max. = 12 000 mm Fin Thickness = 0,3 - 0,4 mm Fa = Outer Tube Surface Area incl. Surface Area of FinsL2 max. = L1 -2t x = acc. to clients specification Fi = Interior Tube Surface Area per Meter (m2/m)

FZR = Uncovered Tube Area between the fins


TECHNIFIN Type „L“

ORDER-No. S di Fins/in. Fa Fa/Fi Weight FRZ mm mm t m2/m Kg/m m2/m

TECHNIFIN® L 1.2.51.-5 5 0,678 10,09 1,51 0,0229

TECHNIFIN® L 1.2.51-6 6 0,798 11,87 1,58 0,0224

TECHNIFIN® L 1.2.51-7 7 0,918 13,65 1,65 0,0219

TECHNIFIN® L 1.2.51-8 2 21,4 8 1,037 15,43 1,72 0,0214

TECHNIFIN® L 1.2.51-9 9 1,157 17,21 1,79 0,0209

TECHNIFIN® L 1.2.51-10 10 1,277 18,99 1,85 0,0204

TECHNIFIN® L 1.2.51-11 11 1,396 20,77 1,94 0,0199

TECHNIFIN® L 1.2,5.51-5 5 0,678 10,58 1,76 0,0229

TECHNIFIN® L 1.2,5.51-6 2,11 6 0,798 12,45 1,83 0,0224

TECHNIFIN® L 1.2,5.51-7 (14 BWG) 7 0,918 14,32 1,90 0,0219

TECHNIFIN® L 1.2,5.51-8 Min. Wall (20,4) 8 1,037 16,19 1,98 0,0214

TECHNIFIN® L 1.2,5.51-9 -2,5 9 1,157 18,05 2,05 0,0209

TECHNIFIN® L 1.2,5.51-10 10 1,277 19,92 2,11 0,0204

TECHNIFIN® L 1.2,5.51-11 11 1,396 21,79 2,19 0,0199

TECHNIFIN® L 1.3.51-5 5 0,678 11,13 2,01 0,0229

TECHNIFIN® L 1.3.51-6 2,77 6 0,798 13,09 2,08 0,0224

TECHNIFIN® L 1.3.51-7 (12 BWG) 7 0,918 15,06 2,15 0,0219

TECHNIFIN® L 1.3.51-8 Min. Wall (19,4) 8 1,037 17,02 2,22 0,0214

TECHNIFIN® L 1.3.51-9 -3,0 9 1,157 18,98 2,29 0,0209

TECHNIFIN® L 1.3.51-10 10 1,277 20,95 2,36 0,0204

TECHNIFIN® L 1.3.51-11 11 1,396 22,91 2,44 0,0199

TECHNIFIN® L 1.2.57-5 5 0,885 13,16 1,65 0,0286

TECHNIFIN® L 1.2.57-6 6 1,046 15,56 1,73 0,0280

TECHNIFIN® L 1.2.57-7 7 1,207 17,95 1,82 0,0274

TECHNIFIN® L 1.2.57-8 2 21,4 8 1,368 20,35 1,92 0,0268

TECHNIFIN® L 1.2.57-9 9 1,529 22,74 2,01 0,0262

TECHNIFIN® L 1.2.57-10 10 1,690 25,14 2,11 0,0256

TECHNIFIN® L 1.2.57-11 11 1,851 27,53 2,20 0,0250

TECHNIFIN® L 1.2,5.57-5 5 0,885 13,81 1,89 0,0286

TECHNIFIN® L 1.2,5.57-6 2,11 6 1,046 16,32 1,99 0,0280

TECHNIFIN® L 1.2,5.57-7 (14BWG) 7 1,207 18,83 2,08 0,0274

TECHNIFIN® L 1.2,5.57-8 Min.Wall (20,4) 8 1,368 21,35 2,18 0,0268

TECHNIFIN® L 1.2,5.57-9 -2,5 9 1,529 23,86 2,27 0,0262

TECHNIFIN® L 1.2,5.57-10 10 1,690 26,37 2,37 0,0256

TECHNIFIN® L 1.2,5.57-11 11 1,851 28,88 2,46 0,0250

TECHNIFIN® L 1.3.57-5 5 0,885 14,42 2,14 0,0286

TECHNIFIN® L 1.3.57-6 2,77 6 1,046 17,16 2,23 0,0280

TECHNIFIN® L 1.3.57-7 (12BWG) 7 1,207 19,80 2,33 0,0274

TECHNIFIN® L 1.3.57-8 Min.Wal (19,4) 8 1,368 22,45 2,42 0,0268

TECHNIFIN® L 1.3.57-9 -3,0 9 1,529 25,09 2,52 0,0262

TECHNIFIN® L 1.3.57-10 10 1,690 27,73 2,61 0,0256

TECHNIFIN® L 1.3.57-11 11 1,851 30,37 2,71 0,0250

Given weights are for steel tubes with Aluminium fins. Weight calculation for steel fins: Kg/m weight of table + 0,1827 x fins per inch.

D = 25,4 mm* DR = 50,8mm + DR = 57 mm* on request, other core tube dimensions available


TECHNIFIN Type „HY“, „HYS“

MATERIAL COMBINATIONSCore Tube

Carbon steels (ASTM A179 / A 214, St 35.8, ect.), low-alloy steels, stainless steels, copper-nickel alloys, alumi-nium bronze, copper, nickel-alloys, as well as exoticgrades.Core tubes with extremely thin wall of above stated materials can be applied.

Exterior Tube & FinsGenerally Aluminium

FIELDS OF APPLICATION

• the petroleum, chemical and petrochemical industries• natural gas treatment• the steel industry: blast furnace and converter cooling

systems• power generation: steam turbine exhaust condensing

- contact condensing with cooling of circulating con-densate

- fossil and nuclear power plants• air conditioning (freon, ammonia, propane)• incineration of household refuse• compressor coolers, ect.

MANUFACTURING PROCESS

A polished and deoiled base tube is set in an aluminiumsleeve. The whole goes through the fin-machine wichconsists of three spindles set at 120° each on bearinga stack of plates. These plates, stacked in from and dia-meter first build the fin, then bond the outer and innertubes together.

In certain cases (high air speed) the fins are serrated afterfin process so as to increase the air coefficient.

ADVANTAGES

1) ThermalThe bonding of the outer and inner tubes removes the riskof loss of contact with the aluminium due to thermalstress.Maximum operating temperature: 250°C.The transfer coeffcient remains steady.Additionally as the outer sleeve is continuous no electro-lytic couple is created.

2) MechanicalThe fins are more rigid and stand the handling shocksbetter, compared to types „G“ an „L“.

L1max. = 12 000 mm Fin Thickness = 0,4 mm Fa = Outer Tube Surface Area incl. Surface Area of FinsL2max. = acc. to clients specification Fi = Interior Tube Surface Area per Meter (m2/m)

FRZ = Uncovered Tube Area between the fins

TECHNIFIN Type „HY“Temperature max.: 300°CTECHNIFIN Type „HYS“Temperature max.: 300°C


TECHNIFIN Type „HY“, „HYS“Standard Size Range

ORDER-No. S di Fins/in. Fa Fa/Fi Weight FZRmm mm t m2/m Kg/m m2/m

TECHNIFIN® HY 1.1.51-8 8 0,991 13,48 1,49 0,0204

TECHNIFIN® HY 1.1.51-9 1,0 23,4 9 1,105 15,02 1,49 0,0200

TECHNIFIN® HY 1.1.51-10 10 1,218 16,56 1,49 0,0197

TECHNIFIN® HY 1.1,2.51-8 8 0,991 13,72 1,68 0,0204

TECHNIFIN® HY 1.1,2.51-9 1,2 23,0 9 1,105 15,28 1,68 0,0200

TECHNIFIN® HY 1.1,2.51-10 10 1,218 16,85 1,68 0,0197

TECHNIFIN® HY 1.1,5.51-8 8 0,991 14,09 1,85 0,0204

TECHNIFIN® HY 1.1,5.51-9 1,5 22,4 9 1,105 15,69 1,85 0,0200

TECHNIFIN® HY 1.1,5.51-10 10 1,218 17,30 1,85 0,0197

TECHNIFIN® HY 1.2.51-8 8 0,991 14,74 2,12 0,0204

TECHNIFIN® HY 1.2.51-9 2,0 21,4 9 1,105 16,43 2,12 0,0200

TECHNIFIN® HY 1.2.51-10 10 1,218 18,11 2,12 0,0197

TECHNIFIN® HY 1.2,5.51-8 8 0,991 15,47 2,38 0,0204

TECHNIFIN® HY 1.2,5.51-9 2,5 20,4 9 1,105 17,23 2,38 0,0200

TECHHIFIN® HY 1.2,5.51-10 10 1,218 19,00 2,38 0,0197

TECHNIFIN® HY 1.3.51-8 8 0,991 16,26 2,62 0,0204

TECHNIFIN® HY 1.3.51-9 3,0 19,4 9 1,105 18,12 2,62 0,0200

TECHNIFIN® HY 1.3.51-10 10 1,218 19,98 2,62 0,0197

TECHNIFIN® HY 1.1.57-8 8 1,330 18,10 1,69 0,0259

TECHNIFIN® HY 1.1.57-9 1,0 23,4 9 1,486 20,23 1,69 0,0254

TECHNIFIN® HY 1.1.57-10 10 1,642 22,33 1,69 0,0249

TECHNIFIN® HY 1.1,2.57-8 8 1,330 18,41 1,88 0,0259

TECHNIFIN® HY 1.1,2.57-9 1,2 23,0 9 1,486 20,58 1,88 0,0254

TECHNIFIN® HY 1.1,2.57-10 10 1,642 22,72 1,88 0,0249

TECHNIFIN® HY 1.1,5.57-8 8 1,330 18,91 2,05 0,0259

TECHNIFIN® HY 1.1,5.57-9 1,5 22,4 9 1,486 21,11 2,05 0,0254

TECHNIFIN® HY 1.1,5.57-10 10 1,642 23,33 2,05 0,0249

TECHNIFIN® HY 1.2.57-8 8 1,330 19,79 2,32 0,0259

TECHNIFIN® HY 1.2.57-9 2,0 21,4 9 1,486 22,12 2,32 0,0254

TECHINFIN® HY 1.2.57-10 10 1,642 24,41 2,32 0,0249

TECHNIFIN® HY 1.2,5.57-8 8 1,330 20,76 2,58 0,0259

TECHNIFIN® HY 1.2,5.57-9 2,5 20,4 9 1,486 23,20 2,58 0,0254

TECHNIFIN® HY 1.2,5.57-10 10 1,642 25,61 2,58 0,0249

TECHNIFIN® HY 1.3.57-8 8 1,330 21,83 2,82 0,0259

TECHNIFIN® HY 1.3.57-9 3,0 19,4 9 1,486 24,40 2,82 0,0254

TECHNIFIN® HY 1.3.57-10 10 1,642 26,93 2,82 0,0249

Given weights are for steel tubes with Aluminium fins. Weight calculation for steel fins: Kg/m weight of table + 0,1827 x fins per inch.

D = 25,4 mm* DR = 50,8 mm + DR = 57 mm*on request, other core tube dimensions available


TECHNIFIN Type „I“

Size Range

Base tube size:6-219.1 (other sizes upon request)Fins: 50-500 fins/meterFin thickness: 0.4-1.5 mm

Fin quantity and size depend on diameter of base tube. In case of deviation against thesizes of the opposite page, please ask us.

Tolerances: Fin height: +/- 1mmFins/meter: +/- 2%/meterPlain ends: +/- 5mm

Manufacturing Process

Fins are spirally wound on a steel base tube, without welding/soldering.Execution: black, galvanized and for special applications Stainless Steel, Copper, Brass,and/or Aluminium.Ends can be bevelled, bended or spot welded upon request.

Fields of application

Climatic Industry, CoolingHeating, Drying


TECHNIFIN Type „I“Standard Size Range

Tube Strip Fins Surface Weight Tube Strip Fins Surface WeightOD Wall Size Diam. Fins/m Area kg/m OD Wall Size Diam. Fins/m Area kg/m

10,2 1,6 10 x 0,4 30 115 0,22 0,60 38 2,6 26 x 1 90 40 0,64 4,01200 0,37 0,83 80 1,17 5,73320 0,57 1,09 123 1,74 7,58

15 1,5 10 x 0,4 35 150 0,34 0,91 38 2,6 30 x 1 98 48 0,91 4,88250 0,54 1,16 83 1,49 6,77350 0,74 1,47 128 2,24 9,20

17,2 1,8 10 x 0,4 37,2 80 0,22 0,91 38 2,6 35 x 1 108 48 1,14 5,62150 0,37 1,11 88 2,00 8,40225 0,52 1,32 120 2,68 10,62300 0,68 1,54 44,5 2,6 26 x 1 96,5 50 0,84 5,00330 0,74 1,62 85 1,34 6,61

17,2 1,8 14 x 0,4 45,2 85 0,35 1,10 120 1,84 8,23110 0,44 1,21 44,5 2,6 30 x 1 104,5 44 0,91 5,22210 0,80 1,70 72 1,41 6,84250 0,95 1,88 120 2,26 9,61

18 2 10 x 0,4 38 80 0,22 1,02 44,5 2,6 35 x 1 114,5 50 1,27 6,38150 0,37 1,22 70 1,72 7,85200 0,48 1,37 105 2,51 10,42250 0,59 1,51 48,3 2,6 26 x 1 100,3 40 0,74 4,86300 0,70 1,65 85 1,40 7,02

18 2 14 x 0,4 46 81 0,35 1,18 155 2,43 10,37150 0,60 1,52 48,3 2,6 30 x 1 108,3 62,5 1,29 6,69220 0,85 1,88 91 1,82 8,40290 1,11 2,21 115 2,26 9,81

20 2 10 x 0,4 48 80 0,24 1,13 48,3 2,6 35 x 1 118,3 50 1,32 6,75120 0,33 1,25 70 1,78 8,27180 0,47 1,44 90 2,25 9,79250 0,62 1,65 57 2,9 30 x 1 117 67 1,50 8,21300 0,74 1,80 92 2,00 9,83

20 2 14 x 0,4 48 100 0,44 1,40 117 2,50 11,44150 0,63 1,65 140 2,95 12,93200 0,82 1,91 57 2,9 35 x 1 127 52 1,48 8,14250 1,01 2,17 72 1,98 9,78

21,3 2 10 x 0,4 41,3 100 0,30 1,27 92 2,49 11,42130 0,37 1,37 112 2,99 13,04185 0,49 1,54 57 2,9 50 x 1 157 33 1,64 8,66210 0,55 1,62 40 1,95 9,67250 0,64 1,75 52,5 2,50 11,47300 0,76 1,94 76,1 2,9 30 x 1 136,1 63 1,69 10,01

21,3 2 14 x 0,4 49,3 98 0,45 1,49 77 2,01 11,05150 0,65 1,78 98 2,49 12,62200 0,84 2,05 110 2,77 13,52250 1,04 2,32 76,1 2,9 35 x 1 146,1 44 1,50 8,58

21,3 2 20 x 0,5 61,3 65 0,51 1,70 61 2,00 11,30100 0,75 2,17 78 2,50 12,60135 1,00 2,50 96 3,00 14,30

25 2 14 x 0,4 53 100 0,49 1,69 76,1 2,9 50 x 1 176,1 36 2,03 11,00150 0,70 2,09 45 2,48 12,56200 0,91 2,26 56 3,02 14,33250 1,12 2,55 88,9 3,2 35 x 1 158,9 55 2,00 12,43

26,9 2,3 14 x 0,4 54,9 100 0,51 1,99 71 2,51 14,06160 0,77 2,34 87 3,01 15,70210 0,99 2,64 88,9 3,2 50 x 1 188,9 35 2,14 12,88

26,9 2,3 20 x 0,5 66,9 60 0,53 2,15 50 2,95 15,49100 0,83 2,65 65 3,75 18,09140 1,14 3,15 108 3,6 35 x 1 178 47 1,99 14,71

30 2,6 20 x 0,5 70 100 0,88 3,08 62 2,52 16,42150 1,28 3,73 76 3,01 18,03200 1,67 4,38 108 3,6 40 x 1 188 51 2,50 16,37

33,7 2,6 20 x 0,5 73,7 40 0,43 2,56 69 3,27 18,86110 1,02 3,52 86 3,99 21,22157 1,41 4,32 108 3,6 50 x 1 208 30 2,10 15,06220 1,93 5,03 45 2,98 17,93

33,7 2,6 26 x 1 85,7 40 0,60 3,64 62 3,98 21,1867 0,95 4,75

110 1,48 6,51

OTHER SIZES CAN BE OFFERED UPON REQUEST!

U-Bent Fin Tubes

Surfacescan be pickled or tinned upon request.

Certificate:DIN 50049/3.1 B orDIN 50049/3.1 C

MaterialsPlease refer to the „Alloy table for fintubes TECHNIFIN Type N and M“

Fields of applicationChemical-, Petrochemical- and Petroleum Industries. Used in condensers, oilcoolers,waterheaters, heatexchangers, evaporators and heat-recoverers.

Manufacturing processThe fins are rolled out of the wall of the plain tube by use of a pass roller. Tube and finconsist of one piece.

AdvantagesEconomical solution of heatexchange problems of media with different heat conduction abili-ties or different current conditions. High chemical-, thermal- and mechanical resistance, sui-table for rough working conditions.

TPS TUBE & PIPE SIZES 7170 TPS TUBE & PIPE SIZES

TECHNIFIN Type „N“Standard Size Range

16.1/2.19 1/2" 12,70 9,80 1,45 7,50 9,50 12,50 19 1,00 0,08 3,6 0,3816.1/2.18 9,40 1,65 7,00 18 1,25 3,8 0,4316.5/8.17 5/8" 15,90 11,90 2,00 9,70 12,70 15,70 17 1,50 0,11 3,6 0,6516.5/8.16 11,60 2,15 9,40 16 1,65 3,7 0,6916.3/4.17 3/4" 19,00 15,00 2,00 12,80 15,80 18,80 17 1,50 0,13 3,3 0,8316.3/4.16 14,70 2,15 12,50 16 1,65 3,4 0,8816.3/4.14 14,00 2,50 11,60 14 2,10 3,6 1,0316.7/8.17 7/8" 22,20 18,20 2,00 16,00 19,00 22,00 17 1,50 0,16 3,1 1,0016.7/8.16 17,90 2,15 15,70 16 1,65 3,2 1,0616.7/8.14 17,20 2,50 14,80 14 2,10 3,3 1,2516.1.17 1" 25,40 21,40 2,00 19,20 22,20 25,20 17 1,50 0,18 3,0 1,1816.1.16 21,10 2,15 18,90 16 1,65 3,1 1,2516.1.14 20,40 2,50 18,00 14 2,10 3,2 1,49

19.1/2.21 1/2" 12,70 10,30 1,20 7,90 9,50 12,50 21 0,80 0,1 4,0 0,3219.1/2.20 10,10 1,30 7,70 20 0,90 4,1 0,3419.1/2.19 9,90 1,40 7,50 19 1,00 4,2 0,3819.1/2.18 9,50 1,60 7,00 18 1,25 4,5 0,4219.5/8.21 5/8" 15,90 13,40 1,25 11,10 12,70 15,70 21 0,80 0,12 3,6 0,4419.5/8.20 13,20 1,35 10,90 20 0,90 3,7 0,4719.5/8.19 13,00 1,45 10,70 19 1,00 3,8 0,5119.5/8.18 12,60 1,65 10,20 18 1,25 4,0 0,5819.5/8.17 11,90 2,00 9,70 17 1,50 4,2 0,6919.5/8.16 11,60 2,15 9,40 16 1,65 4,3 0,7419.3/4.20 3/4" 19,00 16,30 1,35 14,00 15,80 18,80 20 0,90 0,15 3,5 0,6119.3/4.19 16,10 1,45 13,80 19 1,00 3,6 0,6319.3/4.18 15,70 1,65 13,30 18 1,25 3,7 0,7219.3/4.17 15,00 2,00 12,80 17 1,50 3,8 0,8319.3/4.16 14,80 2,10 12,50 16 1,65 3,9 0,8819.3/4.14 14,10 2,45 11,60 14 2,10 4,2 1,0319.7/8.19 7/8" 22,20 19,30 1,45 17,00 19,00 22,00 19 1,00 0,18 3,4 0,8019.7/8.18 18,90 1,65 16,50 18 1,25 3,5 0,8919.7/8.17 18,20 2,00 16,00 17 1,50 3,6 1,0019.7/8.16 18,00 2,10 15,70 16 1,65 3,7 1,0719.7/8.14 17,30 2,45 14,80 14 2,10 3,9 1,2619.1.18 1" 25,40 22,10 1,65 19,70 22,20 25,20 18 1,25 0,21 3,4 1,0519.1.17 21,40 2,00 19,20 17 1,50 3,5 1,1919.1.16 21,10 2,15 18,90 16 1,65 3,6 1,2719.1.14 20,50 2,45 18,00 14 2,10 3,7 1,50

CodeNo.

TECHNIFIN„N“

Int.

d2mm

Ext. surface

Aa

m2/m

Radio outs.to ins.

Aa/Ai

Weight

G Cuca. kg/m

Plain section Finned section

Wall-thickn.

S1mm

Ext.Ø

d5mm

ExternalØ

Inchd1mm

Root dia.Ø

Int. Ext.d3 d4mm mm

Wall-thickn.

BWG S2

mm

16 FINS/ INCH FIN PITCH M = 1.59


26.1/2.21 1/2" 12,70 10,30 1,20 7,90 9,50 12,50 21 0,80 0,12 5,0 0,3426.1/2.19 9,90 1,40 7,50 19 1,00 5,3 0,4026.1/2.18 9,50 1,60 7,00 18 1,25 5,8 0,4526.5/8.21 5/8" 15,90 13,40 1,25 11,10 12,70 15,70 21 0,80 0,16 4,6 0,4626.5/8.19 13,00 1,45 10,70 19 1,00 4,8 0,5326.5/8.18 12,60 1,65 10,20 18 1,25 5,0 0,6026.3/4.20 3/4" 16,30 1,35 14,00 15,80 18,80 20 0,90 0,20 4,5 0,6326.3/4.19 16,10 1,45 13,80 19 1,00 4,6 0,6726.3/4.18 15,70 1,65 13,30 18 1,25 4,8 0,7726.7/8.19 7/8" 22,20 19,30 1,45 17,00 19,00 22,00 19 1,00 0,23 4,4 0,8126.7/8.18 18,90 1,65 16,50 18 1,25 4,5 0,9326.7/8.17 18,20 2,00 16,00 17 1,50 4,7 1,0426.1.18 1" 25,40 22,10 1,65 19,70 22,20 25,20 18 1,25 0,27 4,4 1,0926.1.17 21,40 2,00 19,20 17 1,50 4,5 1,2326.1.16 21,10 2,15 18,90 16 1,65 4,6 1,31

CodeNo.

TECHNIFIN„N“

Int.

d2mm

Ext. surface

Aa

m2/m

Radio outs.to ins.

Aa/Ai

Weight

G Cuca. kg/m


Wall-thickn.

S1mm

Ext.Ø

d5mm

ExternalØ

Inchd1mm

Root dia.Ø

Int. Ext.d3 d4mm mm

Wall-thickn.

BWG S2

mm


CodeNo.

TECHNIFIN„N“

Int.

d2mm

Ext. surface

Aa

m2/m

Radio outs.to ins.

Aa/Ai

Weight

G Cuca. kg/m


Wall-thickn.

S1mm

Ext.Ø

d5mm

ExternalØ

Inchd1mm

Root dia.Ø

Int. Ext.d3 d4mm mm

Wall-thickn.

BWG S2

mm

Weights are based on SF-Cu Copper. For other materials please apply the following conversion factors: CuNi 70/30: 1.0, CuNi 90/10: 1.0, Aluminium Brass: 0.93, Admiralty Brass: 0.96,Aluminium: 0.31, Steel: 0.88

TECHNIFIN Type „N“

d1 d5 d4 d4 S1 S2 L2 L3 L4 L5 L1stripped

+0 +0 +0 +5 +5 +1 < 2000 mm + 2 mm-0,2 -0,2 ± 0,15 -0,2 ± 10% ± 10% -0 -0 ± 3 mm -0 2000 - 8000 mm + 1 ‰

max. 5 mm> 8000 mm + 0,7 ‰

U-Bent Fin Tubes

Surfacescan be pickled or tinned upon request.

Certificate:DIN 50049/3.1 B orDIN 50049/3.1 C

MaterialsPlease refer to the „Alloy table for fintubes TECHNIFIN Type N and M“

Fields of applicationChemical-, Petrochemical- and Petroleum Industries. Used in condensers, oilcoolers,waterheaters, heatexchangers, evaporators and heat-recoverers.

Manufacturing processThe fins are rolled out of the wall of the plain tube by use of a pass roller. Tube and finconsist of one piece.

AdvantagesEconomical solution of heatexchange problems of media with different heat conduction abili-ties or different current conditions. High chemical-, thermal- and mechanical resistance, sui-table for rough working conditions.


TECHNIFIN Type „N“Standard Size Range

16.1/2.19 1/2" 12,70 9,80 1,45 7,50 9,50 12,50 19 1,00 0,08 3,6 0,3816.1/2.18 9,40 1,65 7,00 18 1,25 3,8 0,4316.5/8.17 5/8" 15,90 11,90 2,00 9,70 12,70 15,70 17 1,50 0,11 3,6 0,6516.5/8.16 11,60 2,15 9,40 16 1,65 3,7 0,6916.3/4.17 3/4" 19,00 15,00 2,00 12,80 15,80 18,80 17 1,50 0,13 3,3 0,8316.3/4.16 14,70 2,15 12,50 16 1,65 3,4 0,8816.3/4.14 14,00 2,50 11,60 14 2,10 3,6 1,0316.7/8.17 7/8" 22,20 18,20 2,00 16,00 19,00 22,00 17 1,50 0,16 3,1 1,0016.7/8.16 17,90 2,15 15,70 16 1,65 3,2 1,0616.7/8.14 17,20 2,50 14,80 14 2,10 3,3 1,2516.1.17 1" 25,40 21,40 2,00 19,20 22,20 25,20 17 1,50 0,18 3,0 1,1816.1.16 21,10 2,15 18,90 16 1,65 3,1 1,2516.1.14 20,40 2,50 18,00 14 2,10 3,2 1,49

19.1/2.21 1/2" 12,70 10,30 1,20 7,90 9,50 12,50 21 0,80 0,1 4,0 0,3219.1/2.20 10,10 1,30 7,70 20 0,90 4,1 0,3419.1/2.19 9,90 1,40 7,50 19 1,00 4,2 0,3819.1/2.18 9,50 1,60 7,00 18 1,25 4,5 0,4219.5/8.21 5/8" 15,90 13,40 1,25 11,10 12,70 15,70 21 0,80 0,12 3,6 0,4419.5/8.20 13,20 1,35 10,90 20 0,90 3,7 0,4719.5/8.19 13,00 1,45 10,70 19 1,00 3,8 0,5119.5/8.18 12,60 1,65 10,20 18 1,25 4,0 0,5819.5/8.17 11,90 2,00 9,70 17 1,50 4,2 0,6919.5/8.16 11,60 2,15 9,40 16 1,65 4,3 0,7419.3/4.20 3/4" 19,00 16,30 1,35 14,00 15,80 18,80 20 0,90 0,15 3,5 0,6119.3/4.19 16,10 1,45 13,80 19 1,00 3,6 0,6319.3/4.18 15,70 1,65 13,30 18 1,25 3,7 0,7219.3/4.17 15,00 2,00 12,80 17 1,50 3,8 0,8319.3/4.16 14,80 2,10 12,50 16 1,65 3,9 0,8819.3/4.14 14,10 2,45 11,60 14 2,10 4,2 1,0319.7/8.19 7/8" 22,20 19,30 1,45 17,00 19,00 22,00 19 1,00 0,18 3,4 0,8019.7/8.18 18,90 1,65 16,50 18 1,25 3,5 0,8919.7/8.17 18,20 2,00 16,00 17 1,50 3,6 1,0019.7/8.16 18,00 2,10 15,70 16 1,65 3,7 1,0719.7/8.14 17,30 2,45 14,80 14 2,10 3,9 1,2619.1.18 1" 25,40 22,10 1,65 19,70 22,20 25,20 18 1,25 0,21 3,4 1,0519.1.17 21,40 2,00 19,20 17 1,50 3,5 1,1919.1.16 21,10 2,15 18,90 16 1,65 3,6 1,2719.1.14 20,50 2,45 18,00 14 2,10 3,7 1,50

CodeNo.

TECHNIFIN„N“

Int.

d2mm

Ext. surface

Aa

m2/m

Radio outs.to ins.

Aa/Ai

Weight

G Cuca. kg/m


Wall-thickn.

S1mm

Ext.Ø

d5mm

ExternalØ

Inchd1mm

Root dia.Ø

Int. Ext.d3 d4mm mm

Wall-thickn.

BWG S2

mm



26.1/2.21 1/2" 12,70 10,30 1,20 7,90 9,50 12,50 21 0,80 0,12 5,0 0,3426.1/2.19 9,90 1,40 7,50 19 1,00 5,3 0,4026.1/2.18 9,50 1,60 7,00 18 1,25 5,8 0,4526.5/8.21 5/8" 15,90 13,40 1,25 11,10 12,70 15,70 21 0,80 0,16 4,6 0,4626.5/8.19 13,00 1,45 10,70 19 1,00 4,8 0,5326.5/8.18 12,60 1,65 10,20 18 1,25 5,0 0,6026.3/4.20 3/4" 16,30 1,35 14,00 15,80 18,80 20 0,90 0,20 4,5 0,6326.3/4.19 16,10 1,45 13,80 19 1,00 4,6 0,6726.3/4.18 15,70 1,65 13,30 18 1,25 4,8 0,7726.7/8.19 7/8" 22,20 19,30 1,45 17,00 19,00 22,00 19 1,00 0,23 4,4 0,8126.7/8.18 18,90 1,65 16,50 18 1,25 4,5 0,9326.7/8.17 18,20 2,00 16,00 17 1,50 4,7 1,0426.1.18 1" 25,40 22,10 1,65 19,70 22,20 25,20 18 1,25 0,27 4,4 1,0926.1.17 21,40 2,00 19,20 17 1,50 4,5 1,2326.1.16 21,10 2,15 18,90 16 1,65 4,6 1,31

CodeNo.

TECHNIFIN„N“

Int.

d2mm

Ext. surface

Aa

m2/m

Radio outs.to ins.

Aa/Ai

Weight

G Cuca. kg/m


Wall-thickn.

S1mm

Ext.Ø

d5mm

ExternalØ

Inchd1mm

Root dia.Ø

Int. Ext.d3 d4mm mm

Wall-thickn.

BWG S2

mm


CodeNo.

TECHNIFIN„N“

Int.

d2mm

Ext. surface

Aa

m2/m

Radio outs.to ins.

Aa/Ai

Weight

G Cuca. kg/m


Wall-thickn.

S1mm

Ext.Ø

d5mm

ExternalØ

Inchd1mm

Root dia.Ø

Int. Ext.d3 d4mm mm

Wall-thickn.

BWG S2

mm

Weights are based on SF-Cu Copper. For other materials please apply the following conversion factors: CuNi 70/30: 1.0, CuNi 90/10: 1.0, Aluminium Brass: 0.93, Admiralty Brass: 0.96,Aluminium: 0.31, Steel: 0.88

TECHNIFIN Type „N“

d1 d5 d4 d4 S1 S2 L2 L3 L4 L5 L1stripped

+0 +0 +0 +5 +5 +1 < 2000 mm + 2 mm-0,2 -0,2 ± 0,15 -0,2 ± 10% ± 10% -0 -0 ± 3 mm -0 2000 - 8000 mm + 1 ‰

max. 5 mm> 8000 mm + 0,7 ‰


TECHNIFIN Type „M“

d1 d3 d4 S1 S2 L2 L1stripped

+0 +0 +5 up to 2000 mm + 2 mm-0,2 ± 0,13 -0,2 ± 10% ± 10% -0 2000 - 8000 mm + 1 ‰, max. 5 mm

over 8000 mm + 0,7 ‰

Fields of applicationWater heating, solar technics, oil-cooling, heat-exchangers, condensers, evaporators.

Manufacturing processThe fins are rolled out of the wall of the plain tube as type „N“, but higher fins.

AdvantagesEconomical solution of heat-exchange problems of media with different heat conductionabilities or different current conditions. High chemical-, thermal- and mechanical resistance,suitable for rough working conditions.


TECHNIFIN Type „M“Standard Size Range

Int.Ø

d2mm

Ext. surface

Aa

m2/m

Radio outs.to ins.

Aa/Ai

Weight

G Cuca. kg/m

Wall-thickn.

S1mm

Ext.

Ød5mm

ExternalØ

d1mm

Root dia.

Int. Ext.Ød3 Ød4mm mm

Wall-thickn.

BWG S2

mm

13,00 9,40 1,80 7,90 9,50 16,50 21 0,80 0,16 6,5 0,5013,00 9,00 2,00 7,50 9,50 16,50 19 1,00 0,16 6,7 0,5316,00 12,40 1,80 10,90 12,50 19,50 21 0,80 0,19 5,6 0,6116,00 12,00 2,00 10,50 12,50 19,50 19 1,00 0,19 5,8 0,6718,00 14,00 2,00 12,50 14,50 21,50 19 1,00 0,21 5,4 0,7718,00 13,50 2,25 12,00 14,50 21,50 18 1,25 0,21 5,6 0,8522,00 18,00 2,00 16,50 18,50 25,50 19 1,00 0,27 5,2 0,9622,00 17,50 2,25 16,00 18,50 25,50 18 1,25 0,27 5,4 1,0628,00 23,50 2,25 22,00 24,50 31,50 18 1,25 0,34 4,9 1,4528,00 23,00 2,50 21,50 24,50 31,50 17 1,50 0,34 5,1 1,60

Alloys: SF-Cu CuAsP CuNi10Fe Al 99,5 AlMn AlMg 3Weight Conversion factor: 1,0 1,0 1,0 0,31 0,31 0,31

Plain tube section Finned sectionAlloy-No. Designation DIN* Weight Tensile strength 0,2 Yield str. Elongation Tensile str. State

Rm min. RP 0,2 A 5 min. RmDIN 17007 G/G Cu N/mm2 N/mm2 % N/mm2

2.0090 SF-Cu 1787 1,00 220 50-120 40 350 1,32.1491 CuAsP 17666 1,00 220 50-120 40 350 1,32.0470 CuZn28Sn 17660 0,96 320 100-170 55 340 22.0460 CuZn20AI 17660 0,93 340 120-180 55 340 22.0872 CuNi10Fe 17664 1,00 290 90-180 30 400 1,32.0882 CuNi30Fe 17664 1,00 370 120-220 35 500 1,33.0255 AI99,5 1712 0,30 100 70 6 130 13.3535 AIMg3 1725 0,30 180 80 12 230 13.0515 AIMn 1725 0,31 125 90 6 160 11.4301 5 CrNi 18 9 17440 0,88 500 185 25 700 1,31.4571 10 CrNiMoTi 17440 0,88 500 185 25 700 1,31.0308 St35 1629 0,88 350 240 25 500 1,2,3,1.0305 St35.8 17175 0,88 360 235 25 500 1,2,3,

Fins per inch : 11 Fin-height: h=3,5 mm ± 0,35 mm Fin thickness ~ 0,3 mm Length max. 12,0 m

Alloy table for fin-tubes TECHNIFIN®® Type "N" and "M"Alloys available Properties of various alloys (Standard value)

* or corresponding foreign standards1. hard, as fined - 2. relieved, annealed - 3. Heat treatment acc. to your request

TECHNIFIN Type „M“

d1 d3 d4 S1 S2 L2 L1stripped

+0 +0 +5 up to 2000 mm + 2 mm-0,2 ± 0,13 -0,2 ± 10% ± 10% -0 2000 - 8000 mm + 1 ‰, max. 5 mm

over 8000 mm + 0,7 ‰

Fields of applicationWater heating, solar technics, oil-cooling, heat-exchangers, condensers, evaporators.

Manufacturing processThe fins are rolled out of the wall of the plain tube as type „N“, but higher fins.

AdvantagesEconomical solution of heat-exchange problems of media with different heat conductionabilities or different current conditions. High chemical-, thermal- and mechanical resistance,suitable for rough working conditions.


TECHNIFIN Type „WO“Finned Steel Tubes with Welded-on Fins · Standard Programme

DimensionsCore tubes: to DIN 2448,2458 or ANSI B 36.10 from 16 to 219.1 mm O.D. (other

dimensions upon enquiry)Fins: 50 to 250 fins per meter finned tube

Height: up to 50 mmThickness: 0.9 to 6.0 mmNumber of fins and dimensions depend upon core tube diameter.For dimensions not listed in the above table, please gibe your detailedenquiry.

Lengths: Limited only by transportation facilities or availability of core tubeDimensional tolerances:

Core tube: to respective core tube specificationFin height: ± 0.8 mmNumber of fins: + 2%/mFree ends: + 5mmFree sections: + 10 mm

Fin designfree ends

free sections on the core tube

End shapesplaincalibrated

bevelled for welding on one side to DIN 2559bevelled for welding on both sides or ANSI B 16.25

200 5 1,26 11,3 1,63 13,2 1,89 14,5 2,44 19,1 3,34 24,4150 3,8 1,00 9,89 1,28 11,3 1,48 12,3 1,89 15,8 2,57 19,8

76,1 3,2 0,24 5,75 118 3 0,84 9,01 1,06 10,1 1,22 10,9 1,54 13,6 2,07 16,8100 2,5 0,75 8,51 0,94 9,46 1,07 10,1 1,34 12,4 1,79 15,180 2 0,65 7,96 0,80 8,72 0,90 9,26 1,12 11,1 1,48 13,2

200 5 1,45 13,1 1,87 15,3 2,16 16,8 2,77 21,9 3,77 27,8150 3,8 1,16 11,5 1,47 13,1 1,69 14,3 2,15 18,1 2,90 22,6

88,9 3,2 0,28 6,76 118 3 0,97 10,5 1,22 11,8 1,39 12,7 1,75 15,7 2,34 19,2100 2,5 0,86 9,93 1,08 11,0 1,22 11,8 1,53 14,3 2,03 17,380 2 0,75 9,30 0,92 10,2 1,03 10,8 1,28 12,8 1,68 15,2

200 5 1,64 15,9 2,11 18,3 2,43 19,9 3,10 25,6 4,20 32,1150 3,8 1,31 14,1 1,66 15,9 1,91 17,1 2,41 21,4 3,23 26,3

101,6 3,6 0,32 8,70 118 3 1,10 12,9 1,37 14,3 1,57 15,3 1,96 18,7 2,61 22,5100 2,5 0,98 12,3 1,21 13,5 1,38 14,3 1,71 17,2 2,26 20,480 2 0,85 11,6 1,04 12,5 1,17 13,2 1,43 15,5 1,87 18,1

200 5 2,34 20,4 2,70 22,3 3,43 28,6 4,63 35,6150 3,8 1,85 17,8 2,12 19,2 2,66 23,9 3,56 29,1

114,3 3,6 0,36 9,82 118 3 1,53 16,1 1,74 17,2 2,17 20,9 2,88 25,0100 2,5 1,35 15,1 1,53 16,0 1,90 19,2 2,49 22,780 2 1,15 14,1 1,30 14,8 1,59 17,3 2,07 20,1

200 5 2,85 26,4 3,27 28,6 4,14 36,1 5,53 44,3150 3,8 2,25 23,2 2,57 24,8 3,21 30,4 4,26 36,6

141,3 4,0 0,44 13,5 118 3 1,86 21,1 2,11 22,4 2,62 26,8 3,45 31,7100 2,5 1,65 19,0 1,86 21,1 2,29 24,8 2,99 28,980 2 1,41 18,7 1,58 19,6 1,92 22,6 2,48 25,8

200 5 3,18 31,5 3,65 33,9 4,60 42,2 6,13 51,2150 3,8 2,51 27,9 2,86 29,7 3,57 35,9 4,72 42,7

159 4,5 0,50 17,14 118 3 2,08 25,6 2,36 27,0 2,92 31,9 3,82 37,2100 2,5 1,84 24,3 2,07 25,5 2,55 29,6 3,31 34,280 2 1,57 22,9 1,76 23,8 2,14 27,1 2,75 30,8

200 5 3,35 33,3 3,85 35,8 4,84 44,5 6,44 53,9150 3,8 2,65 29,5 3,02 31,4 3,76 37,9 4,96 45,0

168,3 4,5 0,53 18,17 118 3 2,19 27,1 2,49 28,6 3,07 33,7 4,02 39,3100 2,5 1,94 25,7 2,19 27,0 2,68 31,3 3,48 36,080 2 1,66 24,2 1,86 25,2 2,25 28,7 2,89 32,5

200 5 3,83 42,3 4,38 45,1 5,50 55,0 7,29 65,5150 3,8 3,02 38,0 3,44 40,1 4,28 47,5 5,62 55,4

193,7 5,4 0,61 25,06 118 3 2,51 35,2 2,84 36,9 3,50 42,7 4,55 48,9100 2,5 2,22 33,7 2,50 35,1 3,06 40,0 3,95 45,380 2 1,90 32,0 2,12 33,1 2,57 37,0 3,28 41,2

200 5 4,30 50,3 4,92 53,2 6,16 64,5 8,15 76,1150 3,8 3,40 45,5 3,86 47,9 4,80 56,1 6,28 64,9

219,1 5,9 0,69 31,01 118 3 2,82 42,4 3,19 44,3 3,92 50,7 5,09 57,6100 2,5 2,49 40,7 2,80 42,3 3,43 47,7 4,42 53,680 2 2,13 38,7 2,38 40,0 2,88 44,4 3,67 49,1

O.D.

damm

Wallthickn

smm

SurfaceareaF´k

m2/m

Weight

Gkkg/m

Core Tubes Number of finsN

per perm inch

Fin height x fin thickness (HR x b)Fin tube surface area / fin tube weight

10 x 1,3 13 x 1,3 15 x 1,3 19 x 1,5 25 x 1,5

m2/m kg/m m2/m kg/m m2/m kg/m m2/m kg/m m2/m kg/m

Many othersizes uponrequest - ask TPS!

250 6,35 0,44 2,72200 5 0,36 2,30

16 1,8 0,05 0,63 150 3,8 0,29 1,88118 3 0,24 1,64100 2,5 0,21 1,47250 6,35 0,54 3,46200 5 0,44 2,96

21,3 2 0,07 0,95 150 3,8 0,35 2,46118 3 0,29 2,14100 2,5 0,26 1,96250 6,35 0,60 3,94 0,83 5,09200 5 0,50 3,38 0,68 4,30

25 2 0,08 1,13 150 3,8 0,39 2,82 0,53 3,51118 3 0,33 2,46 0,43 3,01100 2,5 0,29 2,26 0,38 2,72200 5 0,60 4,55 0,81 5,61 0,96 6,37150 3,8 0,48 3,88 0,63 4,67 0,74 5,25

31,8 2,6 0,10 1,87 118 3 0,40 3,46 0,52 4,08 0,61 4,53100 2,5 0,35 3,22 0,45 3,74 0,53 4,1380 2 0,30 2,95 0,38 3,37 0,44 3,68

200 5 0,69 5,82 0,92 7,00 1,09 7,84 1,44 10,8150 3,8 0,55 5,05 0,72 5,93 0,85 6,57 1,11 8,76

38 3,2 0,12 2,75 118 3 0,46 4,56 0,59 5,26 0,69 5,76 0,90 7,48100 2,5 0,41 4,29 0,52 4,87 0,60 5,30 0,78 6,7680 2 0,35 3,98 0,44 4,45 0,51 4,79 0,65 5,96

200 5 0,85 7,30 1,11 8,67 1,31 9,64 1,71 13,0150 3,8 0,67 6,36 0,87 7,39 1,02 8,12 1,32 10,7

48,3 3,2 0,15 3,56 118 3 0,56 5,76 0,72 6,57 0,83 7,15 1,07 9,14100 2,5 0,50 5,43 0,63 6,11 0,73 6,60 0,93 8,2980 2 0,43 5,06 0,54 5,61 0,61 6,00 0,78 7,35

200 5 0,89 7,68 1,16 9,10 1,36 10,1 1,78 13,6 2,50 17,8150 3,8 0,70 6,70 0,91 7,77 1,06 8,53 1,38 11,2 1,92 14,3

51 3,2 0,16 3,77 118 3 0,59 6,08 0,75 6,92 0,87 7,52 1,12 9,58 1,54 12,1100 2,5 0,52 5,73 0,66 6,44 0,76 6,95 0,97 8,69 1,33 10,880 2 0,45 5,34 0,56 5,91 0,64 6,31 0,81 7,71 1,10 9,4

200 5 0,97 8,54 1,28 10,1 1,49 11,2 1,94 14,9 2,70 19,4150 3,8 0,78 7,47 1,00 8,62 1,16 9,44 1,50 12,3 2,07 15,6

57 3,2 0,18 4,24 118 3 0,65 6,78 0,83 7,69 0,95 8,33 1,22 10,6 1,67 13,2100 2,5 0,58 6,39 0,73 7,16 0,84 7,71 1,06 9,59 1,44 11,880 2 0,50 5,96 0,62 6,58 0,70 7,02 0,88 8,52 1,19 10,3

200 5 1,02 9,01 1,34 10,6 1,56 11,7 2,03 15,7 2,81 20,3150 3,8 0,82 7,88 1,05 9,09 1,22 9,94 1,57 12,9 2,16 16,3

60,3 3,2 0,19 4,5 118 3 0,68 7,16 0,87 8,11 1,00 8,78 1,27 11,1 1,74 13,8100 2,5 0,61 6,76 0,76 7,56 0,88 8,13 1,11 10,1 1,50 12,480 2 0,52 6,31 0,65 6,95 0,74 7,40 0,93 8,97 1,24 10,8


Formula for Calculation of Fin Tube Weight: - Carbon Steel -

kg/m = 7,85 ·π 1000 · s (da - s) + b · N · HR (HR + da)106

da = bare pipe O.D. (mm)s = bare pipe wallthickness (mm)b = fin thickness (mm)N = fins per meterHR = fin height (mm)

This is a simplified formula and should be used as estimation only, since manufacturing tolerances are not considered

Factor other than Carbon Steel:Type 304/310/316/321 : 1.024 Techalloy 200 : 1.133Techalloy 600/625 : 1.073 Techalloy 825 : 1.038

O.D.

damm

Wallthickn

smm

SurfaceareaF´k

m2/m

Weight

Gkkg/m


per perm inch


10 x 1,3 13 x 1,3 15 x 1,3 19 x 1,5 25 x 1,5


[ ]



DimensionsCore tubes: to DIN 2448,2458 or ANSI B 36.10 from 16 to 219.1 mm O.D. (other

dimensions upon enquiry)Fins: 50 to 250 fins per meter finned tube

Height: up to 50 mmThickness: 0.9 to 6.0 mmNumber of fins and dimensions depend upon core tube diameter.For dimensions not listed in the above table, please gibe your detailedenquiry.

Lengths: Limited only by transportation facilities or availability of core tubeDimensional tolerances:

Core tube: to respective core tube specificationFin height: ± 0.8 mmNumber of fins: + 2%/mFree ends: + 5mmFree sections: + 10 mm

Fin designfree ends

free sections on the core tube

End shapesplaincalibrated

bevelled for welding on one side to DIN 2559bevelled for welding on both sides or ANSI B 16.25

200 5 1,26 11,3 1,63 13,2 1,89 14,5 2,44 19,1 3,34 24,4150 3,8 1,00 9,89 1,28 11,3 1,48 12,3 1,89 15,8 2,57 19,8

76,1 3,2 0,24 5,75 118 3 0,84 9,01 1,06 10,1 1,22 10,9 1,54 13,6 2,07 16,8100 2,5 0,75 8,51 0,94 9,46 1,07 10,1 1,34 12,4 1,79 15,180 2 0,65 7,96 0,80 8,72 0,90 9,26 1,12 11,1 1,48 13,2

200 5 1,45 13,1 1,87 15,3 2,16 16,8 2,77 21,9 3,77 27,8150 3,8 1,16 11,5 1,47 13,1 1,69 14,3 2,15 18,1 2,90 22,6

88,9 3,2 0,28 6,76 118 3 0,97 10,5 1,22 11,8 1,39 12,7 1,75 15,7 2,34 19,2100 2,5 0,86 9,93 1,08 11,0 1,22 11,8 1,53 14,3 2,03 17,380 2 0,75 9,30 0,92 10,2 1,03 10,8 1,28 12,8 1,68 15,2

200 5 1,64 15,9 2,11 18,3 2,43 19,9 3,10 25,6 4,20 32,1150 3,8 1,31 14,1 1,66 15,9 1,91 17,1 2,41 21,4 3,23 26,3

101,6 3,6 0,32 8,70 118 3 1,10 12,9 1,37 14,3 1,57 15,3 1,96 18,7 2,61 22,5100 2,5 0,98 12,3 1,21 13,5 1,38 14,3 1,71 17,2 2,26 20,480 2 0,85 11,6 1,04 12,5 1,17 13,2 1,43 15,5 1,87 18,1

200 5 2,34 20,4 2,70 22,3 3,43 28,6 4,63 35,6150 3,8 1,85 17,8 2,12 19,2 2,66 23,9 3,56 29,1

114,3 3,6 0,36 9,82 118 3 1,53 16,1 1,74 17,2 2,17 20,9 2,88 25,0100 2,5 1,35 15,1 1,53 16,0 1,90 19,2 2,49 22,780 2 1,15 14,1 1,30 14,8 1,59 17,3 2,07 20,1

200 5 2,85 26,4 3,27 28,6 4,14 36,1 5,53 44,3150 3,8 2,25 23,2 2,57 24,8 3,21 30,4 4,26 36,6

141,3 4,0 0,44 13,5 118 3 1,86 21,1 2,11 22,4 2,62 26,8 3,45 31,7100 2,5 1,65 19,0 1,86 21,1 2,29 24,8 2,99 28,980 2 1,41 18,7 1,58 19,6 1,92 22,6 2,48 25,8

200 5 3,18 31,5 3,65 33,9 4,60 42,2 6,13 51,2150 3,8 2,51 27,9 2,86 29,7 3,57 35,9 4,72 42,7

159 4,5 0,50 17,14 118 3 2,08 25,6 2,36 27,0 2,92 31,9 3,82 37,2100 2,5 1,84 24,3 2,07 25,5 2,55 29,6 3,31 34,280 2 1,57 22,9 1,76 23,8 2,14 27,1 2,75 30,8

200 5 3,35 33,3 3,85 35,8 4,84 44,5 6,44 53,9150 3,8 2,65 29,5 3,02 31,4 3,76 37,9 4,96 45,0

168,3 4,5 0,53 18,17 118 3 2,19 27,1 2,49 28,6 3,07 33,7 4,02 39,3100 2,5 1,94 25,7 2,19 27,0 2,68 31,3 3,48 36,080 2 1,66 24,2 1,86 25,2 2,25 28,7 2,89 32,5

200 5 3,83 42,3 4,38 45,1 5,50 55,0 7,29 65,5150 3,8 3,02 38,0 3,44 40,1 4,28 47,5 5,62 55,4

193,7 5,4 0,61 25,06 118 3 2,51 35,2 2,84 36,9 3,50 42,7 4,55 48,9100 2,5 2,22 33,7 2,50 35,1 3,06 40,0 3,95 45,380 2 1,90 32,0 2,12 33,1 2,57 37,0 3,28 41,2

200 5 4,30 50,3 4,92 53,2 6,16 64,5 8,15 76,1150 3,8 3,40 45,5 3,86 47,9 4,80 56,1 6,28 64,9

219,1 5,9 0,69 31,01 118 3 2,82 42,4 3,19 44,3 3,92 50,7 5,09 57,6100 2,5 2,49 40,7 2,80 42,3 3,43 47,7 4,42 53,680 2 2,13 38,7 2,38 40,0 2,88 44,4 3,67 49,1

O.D.

damm

Wallthickn

smm

SurfaceareaF´k

m2/m

Weight

Gkkg/m


per perm inch


10 x 1,3 13 x 1,3 15 x 1,3 19 x 1,5 25 x 1,5


Many othersizes uponrequest - ask TPS!

250 6,35 0,44 2,72200 5 0,36 2,30

16 1,8 0,05 0,63 150 3,8 0,29 1,88118 3 0,24 1,64100 2,5 0,21 1,47250 6,35 0,54 3,46200 5 0,44 2,96

21,3 2 0,07 0,95 150 3,8 0,35 2,46118 3 0,29 2,14100 2,5 0,26 1,96250 6,35 0,60 3,94 0,83 5,09200 5 0,50 3,38 0,68 4,30

25 2 0,08 1,13 150 3,8 0,39 2,82 0,53 3,51118 3 0,33 2,46 0,43 3,01100 2,5 0,29 2,26 0,38 2,72200 5 0,60 4,55 0,81 5,61 0,96 6,37150 3,8 0,48 3,88 0,63 4,67 0,74 5,25

31,8 2,6 0,10 1,87 118 3 0,40 3,46 0,52 4,08 0,61 4,53100 2,5 0,35 3,22 0,45 3,74 0,53 4,1380 2 0,30 2,95 0,38 3,37 0,44 3,68

200 5 0,69 5,82 0,92 7,00 1,09 7,84 1,44 10,8150 3,8 0,55 5,05 0,72 5,93 0,85 6,57 1,11 8,76

38 3,2 0,12 2,75 118 3 0,46 4,56 0,59 5,26 0,69 5,76 0,90 7,48100 2,5 0,41 4,29 0,52 4,87 0,60 5,30 0,78 6,7680 2 0,35 3,98 0,44 4,45 0,51 4,79 0,65 5,96

200 5 0,85 7,30 1,11 8,67 1,31 9,64 1,71 13,0150 3,8 0,67 6,36 0,87 7,39 1,02 8,12 1,32 10,7

48,3 3,2 0,15 3,56 118 3 0,56 5,76 0,72 6,57 0,83 7,15 1,07 9,14100 2,5 0,50 5,43 0,63 6,11 0,73 6,60 0,93 8,2980 2 0,43 5,06 0,54 5,61 0,61 6,00 0,78 7,35

200 5 0,89 7,68 1,16 9,10 1,36 10,1 1,78 13,6 2,50 17,8150 3,8 0,70 6,70 0,91 7,77 1,06 8,53 1,38 11,2 1,92 14,3

51 3,2 0,16 3,77 118 3 0,59 6,08 0,75 6,92 0,87 7,52 1,12 9,58 1,54 12,1100 2,5 0,52 5,73 0,66 6,44 0,76 6,95 0,97 8,69 1,33 10,880 2 0,45 5,34 0,56 5,91 0,64 6,31 0,81 7,71 1,10 9,4

200 5 0,97 8,54 1,28 10,1 1,49 11,2 1,94 14,9 2,70 19,4150 3,8 0,78 7,47 1,00 8,62 1,16 9,44 1,50 12,3 2,07 15,6

57 3,2 0,18 4,24 118 3 0,65 6,78 0,83 7,69 0,95 8,33 1,22 10,6 1,67 13,2100 2,5 0,58 6,39 0,73 7,16 0,84 7,71 1,06 9,59 1,44 11,880 2 0,50 5,96 0,62 6,58 0,70 7,02 0,88 8,52 1,19 10,3

200 5 1,02 9,01 1,34 10,6 1,56 11,7 2,03 15,7 2,81 20,3150 3,8 0,82 7,88 1,05 9,09 1,22 9,94 1,57 12,9 2,16 16,3

60,3 3,2 0,19 4,5 118 3 0,68 7,16 0,87 8,11 1,00 8,78 1,27 11,1 1,74 13,8100 2,5 0,61 6,76 0,76 7,56 0,88 8,13 1,11 10,1 1,50 12,480 2 0,52 6,31 0,65 6,95 0,74 7,40 0,93 8,97 1,24 10,8


Formula for Calculation of Fin Tube Weight: - Carbon Steel -

kg/m = 7,85 ·π 1000 · s (da - s) + b · N · HR (HR + da)106

da = bare pipe O.D. (mm)s = bare pipe wallthickness (mm)b = fin thickness (mm)N = fins per meterHR = fin height (mm)

This is a simplified formula and should be used as estimation only, since manufacturing tolerances are not considered

Factor other than Carbon Steel:Type 304/310/316/321 : 1.024 Techalloy 200 : 1.133Techalloy 600/625 : 1.073 Techalloy 825 : 1.038

O.D.

damm

Wallthickn

smm

SurfaceareaF´k

m2/m

Weight

Gkkg/m


per perm inch


10 x 1,3 13 x 1,3 15 x 1,3 19 x 1,5 25 x 1,5


[ ]


TECHNIFIN Type „WO“/“WOS“

MaterialsBase tube FinsCarbon Steel Carbon SteelLow Alloy Steel Low Alloy SteelStainless Steel Ferritic Stainless SteelNickel Alloys Austenitic Stainless Steel

Nickel Alloys

Heat transfer surface to be calculated al follows:

HTS = π103 · da + 2N · HR (HR + da) -N · da · b

106

HTS = Heat Transfer Surface in m2/mda = Outside Diameter of the Bare Tubes in mmHR = Fin height in mmb = Fin Thickness in mmN = Number of Fins per mm

[ ]


Fields of applicationFired Heaters, Heat Exchangers, Boilers, Pre-Heaters, Coolers, Heat Pipes, Dryers, Heaters

Manufacturing processThe fin strip is spirally wound onto the tube and welded continuously to the tube along thespiral foot.Welding process: HF, SF, TIG, MIGFor type „WOS“ find are serrated.

Advantage

Type „WO“Strong connection between fin and base tube, prevents loosening of fin because of heatstress, oxydization, corrosion etc.Use at very high temperatures possible.

Type „WOS“As per Type „WO“, but fins are serrated. Therefore higher heat transfer coefficient, for thesame pressure drop compared with „WO“-fin.



MaterialsBase tube FinsCarbon Steel Carbon SteelLow Alloy Steel Low Alloy SteelStainless Steel Ferritic Stainless SteelNickel Alloys Austenitic Stainless Steel

Nickel Alloys

Heat transfer surface to be calculated al follows:

HTS = π103 · da + 2N · HR (HR + da) -N · da · b

106

HTS = Heat Transfer Surface in m2/mda = Outside Diameter of the Bare Tubes in mmHR = Fin height in mmb = Fin Thickness in mmN = Number of Fins per mm

[ ]


Fields of applicationFired Heaters, Heat Exchangers, Boilers, Pre-Heaters, Coolers, Heat Pipes, Dryers, Heaters

Manufacturing processThe fin strip is spirally wound onto the tube and welded continuously to the tube along thespiral foot.Welding process: HF, SF, TIG, MIGFor type „WOS“ find are serrated.

Advantage

Type „WO“Strong connection between fin and base tube, prevents loosening of fin because of heatstress, oxydization, corrosion etc.Use at very high temperatures possible.

Type „WOS“As per Type „WO“, but fins are serrated. Therefore higher heat transfer coefficient, for thesame pressure drop compared with „WO“-fin.


TECHNIFIN Type „LFS“Standard Size Range

Typical wall thicknessesFin thicknessTube Width

3,2 3,6 4 4,5 5 5,6 6,2of profile

Weight kg/md e b1 b2 r

25,0 36,0 2,15 2,33 2,50 2,71 2,90 4,5 5,5 5

26,9 37,5 2,39 2,59 2,78 2,98 3,20 3,44 3,71 5,0 6,0 5

42,5 2,72 2,95 3,17 3,41 3,66 3,95 4,2830,0 45,0 2,83 3,06 3,28 3,52 3,77 4,06 4,39 5,0 6,0 5

47,5 2,94 3,17 3,39 3,63 3,88 4,17 4,50

45,0 2,90 3,16 3,39 3,65 3,93 4,23 4,6031,8 47,5 3,02 3,27 3,51 3,77 4,05 4,35 4,72 5,0 6,5 5

50,0 3,13 3,38 3,62 3,88 4,16 4,46 4,83

45,0 2,88 3,15 3,41 3,69 4,00 4,33 4,7333,7 47,5 3,14 3,41 3,67 3,95 4,26 4,59 4,99 5,5 7,0 5

50,0 3,26 3,53 3,79 4,07 4,38 4,71 5,11

50,0 3,55 3,86 4,16 4,49 4,85 5,25 5,3738,0 52,5 3,69 4,00 4,30 4,63 4,99 5,39 5,51 6,0 8,0 6

57,5 3,97 4,28 4,58 4,91 5,27 5,67 5,79

52,5 4,15 4,49 4,87 5,29 5,75 6,3042,4 57,5 4,42 4,76 5,14 5,56 6,02 6,57 6,0 8,0 6

60,0 4,56 4,90 5,28 5,70 6,16 6,81

44,5 60,0 4,69 5,06 5,46 5,91 6,39 6,99 6,5 8,5 665,0 4,98 5,35 5,75 6,20 6,68 7,28

48,3 65,0 5,11 5,52 5,96 6,45 7,00 7,66 6,5 8,5 670,0 5,40 5,81 6,25 6,74 7,39 7,95

51,0 65,0 5,23 5,66 6,13 6,67 7,24 7,95 7,0 9,0 670,0 5,55 5,98 6,45 6,98 7,56 8,27

57,0 70,0 6,21 6,75 7,35 8,02 8,85 7,0 9,0 675,0 6,52 7,06 7,66 8,33 9,16

60,3 75,0 6,64 7,22 7,87 8,68 9,47 7,0 9,0 680,0 6,95 7,53 8,18 8,89 9,78

63,5 80,0 7,07 7,68 8,37 9,13 10,07 7,0 9,0 685,0 7,38 7,99 8,68 9,44 10,38

70,0 85,0 7,73 8,42 9,19 10,03 11,10 7,5 9,5 790,0 8,07 8,76 9,53 10,37 11,44

76,1 90,0 8,28 9,03 9,88 10,82 12,01 7,5 9,5 795,0 8,61 9,36 10,21 11,15 12,34

In addition to longitudinal fin tubes, sections of many shapes can be produced by hot extrusion with two or more internal and/or external fins inthe size range mentioned on the left page.

TECHNIFIN Type „LFS“

Standard Size RangeInside diameter: 29 - 110 mmWall thickness: 3.2 - 20 mmW.T. ratio: approx 10% O.D.Lenght: max. 11 - 12 meterFin dia: max. 200 mm

Eccentricity: max. 10%

Max. torsion up to 6 mtr-L = 1,5 mm6 - 8 mm-L = 2.25 mm8 mtr and longer-L = 3.0 mm

Straightness: max. 0,2%on total length

Field of applicationBoiler water wall constructionsWater power plantsAtomic power stationsSteam generatorsGas recuperatorsFlue tube boilersFuel element coils

AdvantageThe fin tube is seamless and manufactured out of equal raw material.No welding seams.

MaterialsMainly Carbon Steels, Ferritic Alloy and Austenitic Stainless Steel, Nickel Alloy

Manufacturing ProcessHot-extrusion processCold drawn process


TECHNIFIN Type „LFS“Standard Size Range

Typical wall thicknessesFin thicknessTube Width

3,2 3,6 4 4,5 5 5,6 6,2of profile

Weight kg/md e b1 b2 r

25,0 36,0 2,15 2,33 2,50 2,71 2,90 4,5 5,5 5

26,9 37,5 2,39 2,59 2,78 2,98 3,20 3,44 3,71 5,0 6,0 5

42,5 2,72 2,95 3,17 3,41 3,66 3,95 4,2830,0 45,0 2,83 3,06 3,28 3,52 3,77 4,06 4,39 5,0 6,0 5

47,5 2,94 3,17 3,39 3,63 3,88 4,17 4,50

45,0 2,90 3,16 3,39 3,65 3,93 4,23 4,6031,8 47,5 3,02 3,27 3,51 3,77 4,05 4,35 4,72 5,0 6,5 5

50,0 3,13 3,38 3,62 3,88 4,16 4,46 4,83

45,0 2,88 3,15 3,41 3,69 4,00 4,33 4,7333,7 47,5 3,14 3,41 3,67 3,95 4,26 4,59 4,99 5,5 7,0 5

50,0 3,26 3,53 3,79 4,07 4,38 4,71 5,11

50,0 3,55 3,86 4,16 4,49 4,85 5,25 5,3738,0 52,5 3,69 4,00 4,30 4,63 4,99 5,39 5,51 6,0 8,0 6

57,5 3,97 4,28 4,58 4,91 5,27 5,67 5,79

52,5 4,15 4,49 4,87 5,29 5,75 6,3042,4 57,5 4,42 4,76 5,14 5,56 6,02 6,57 6,0 8,0 6

60,0 4,56 4,90 5,28 5,70 6,16 6,81

44,5 60,0 4,69 5,06 5,46 5,91 6,39 6,99 6,5 8,5 665,0 4,98 5,35 5,75 6,20 6,68 7,28

48,3 65,0 5,11 5,52 5,96 6,45 7,00 7,66 6,5 8,5 670,0 5,40 5,81 6,25 6,74 7,39 7,95

51,0 65,0 5,23 5,66 6,13 6,67 7,24 7,95 7,0 9,0 670,0 5,55 5,98 6,45 6,98 7,56 8,27

57,0 70,0 6,21 6,75 7,35 8,02 8,85 7,0 9,0 675,0 6,52 7,06 7,66 8,33 9,16

60,3 75,0 6,64 7,22 7,87 8,68 9,47 7,0 9,0 680,0 6,95 7,53 8,18 8,89 9,78

63,5 80,0 7,07 7,68 8,37 9,13 10,07 7,0 9,0 685,0 7,38 7,99 8,68 9,44 10,38

70,0 85,0 7,73 8,42 9,19 10,03 11,10 7,5 9,5 790,0 8,07 8,76 9,53 10,37 11,44

76,1 90,0 8,28 9,03 9,88 10,82 12,01 7,5 9,5 795,0 8,61 9,36 10,21 11,15 12,34

In addition to longitudinal fin tubes, sections of many shapes can be produced by hot extrusion with two or more internal and/or external fins inthe size range mentioned on the left page.

TECHNIFIN Type „LFS“

Standard Size RangeInside diameter: 29 - 110 mmWall thickness: 3.2 - 20 mmW.T. ratio: approx 10% O.D.Lenght: max. 11 - 12 meterFin dia: max. 200 mm

Eccentricity: max. 10%

Max. torsion up to 6 mtr-L = 1,5 mm6 - 8 mm-L = 2.25 mm8 mtr and longer-L = 3.0 mm

Straightness: max. 0,2%on total length

Field of applicationBoiler water wall constructionsWater power plantsAtomic power stationsSteam generatorsGas recuperatorsFlue tube boilersFuel element coils

AdvantageThe fin tube is seamless and manufactured out of equal raw material.No welding seams.

MaterialsMainly Carbon Steels, Ferritic Alloy and Austenitic Stainless Steel, Nickel Alloy

Manufacturing ProcessHot-extrusion processCold drawn process


TECHNIFIN Type „LFW“Standard Size Range

FINNED TUBE AND PIPE SURFACES FINNED TUBE AND PIPE SURFACESsquare feet per foot of finned length m2/meter of finned length

O.D. or Fin Height Fin Height - mm O.D. orNominal No. of NominalPipe Size 1/4" 1/2" 3/4" 1" Fins 6.35 12.7 19.05 25.4 Pipe Size

3/4" O.D. 0.863 1.529 2.196 2.863 16 0.2627 0.4654 0.6685 0.8715 19.05 mm

7/8" O.D. 0.895 1.562 2.229 2.896 16 0.2724 0.4755 0.6785 0.8816 22.22 mm1.062 1.895 2.729 3.562 20 0.3233 0.5768 0.8307 1.0843

1" O.D. 0.928 1.595 2.262 2.928 16 0.2825 0.4855 0.6886 0.8913 25.4 mm1.095 1.928 2.762 3.595 20 0.3333 0.5869 0.8408 1.09441.262 2.262 3.262 4.262 24 0.3842 0.6886 0.9930 1.2974

3/4" I.P.S. 0.941 1.608 2.275 2.942 16 0.2865 0.4895 0.6925 0.8956 3/4" I.P.S.1.05" O.D. 1.108 1.941 2.775 3.608 20 0.3373 0.5909 0.8447 1.0983 26.67 mm

1.275 2.275 3.275 4.275 24 0.3881 0.6925 0.9970 1.3014

1 1/2" I.P.S. 1.497 2.497 3.497 4.497 24 0.4557 0.7601 1.0645 1.3689 1 1/2" I.P.S.1.9" O.D. 1.830 3.163 4.497 5.830 32 0.5571 0.9629 1.3689 1.7747 48.26 mm

2.163 3.830 5.497 7.163 40 0.6584 1.1659 1.6734 2.1805

2" I.P.S. 1.955 3.288 4.622 5.956 32 0.5951 1.0009 1.4070 1.8131 2" I.P.S.2.375" O.D. 2.288 3.955 5.622 7.288 40 0.6965 1.2040 1.7114 2.2186 60.32 mm

OBSTRUCTION - square inches OBSTRUCTION - mm2


3/4" O.D. 0.6215 0.7791 0.9367 1.0943 16 400.97 502.64 604.32 706.00 19.05 mm

7/8" O.D. 0.7810 0.9386 1.0962 1.2538 16 503.87 605.55 707.22 808.90 22.22 mm0.8259 1.0229 1.2199 1.4169 20 532.84 659.93 787.03 914.13

1" O.D. 0.9651 1.1227 1.2803 1.4379 16 622.64 724.32 826.00 927.68 25.4 mm1.0100 1.2070 1.4040 1.6010 20 651.61 778.71 905.80 1032.901.0549 1.2913 1.5277 1.7641 24 680.58 833.10 985.61 1138.13

3/4" I.P.S. 1.0456 1.2032 1.3608 1.5184 16 674.58 776.26 877.93 979.61 3/4" I.P.S.1.05" O.D. 1.0905 1.2875 1.4845 1.6815 20 703.55 830.64 957.74 1084.84 26.67 mm

1.1354 1.3718 1.6082 1.8446 24 732.51 885.03 1037.55 1190.06

1 1/2" I.P.S. 3.1048 3.3412 3.5776 3.8140 24 2003.09 2155.61 2308.12 2460.64 1 1/2" I.P.S.1.9" O.D. 3.1946 3.5098 3.8250 4.1402 32 2061.03 2264.38 2467.74 2671.09 48.26 mm

3.2845 3.6785 4.0725 4.4665 40 2119.03 2373.22 2627.41 2882.61

2" I.P.S. 4.7894 5.1046 5.4198 5.7350 32 3089.93 3293.28 3496.64 3699.99 2" I.P.S.2.375" O.D. 4.8793 5.2733 5.6673 6.0613 40 3147.93 3402.12 3656.31 3910.51 60.32 mm

TECHNIFIN Type „LFW“

Size RangeAs per opposite page

Fields of applicationChemical-, Petrochemical-, Oil-, Power IndustryHeat-ExchangersFired HeatersGas Coolers and HeatersTank Heaters

Manufacturing processThe longitudinal I/L or U fins are welded onto the base tubed by resistance weldingor welding with filler metal.

AdvantageIncrease of heat transfer rates for viscous liquids. Perforated fin type used wheneverdrainage of liquid from fin channels become a problem. Widely used in horizontalheat-ex hangers.

MaterialCarbon SteelAlloy SteelStainless SteelNickel Alloy Other Alloys


TECHNIFIN Type „LFW“Standard Size Range

FINNED TUBE AND PIPE SURFACES FINNED TUBE AND PIPE SURFACESsquare feet per foot of finned length m2/meter of finned length


3/4" O.D. 0.863 1.529 2.196 2.863 16 0.2627 0.4654 0.6685 0.8715 19.05 mm

7/8" O.D. 0.895 1.562 2.229 2.896 16 0.2724 0.4755 0.6785 0.8816 22.22 mm1.062 1.895 2.729 3.562 20 0.3233 0.5768 0.8307 1.0843

1" O.D. 0.928 1.595 2.262 2.928 16 0.2825 0.4855 0.6886 0.8913 25.4 mm1.095 1.928 2.762 3.595 20 0.3333 0.5869 0.8408 1.09441.262 2.262 3.262 4.262 24 0.3842 0.6886 0.9930 1.2974

3/4" I.P.S. 0.941 1.608 2.275 2.942 16 0.2865 0.4895 0.6925 0.8956 3/4" I.P.S.1.05" O.D. 1.108 1.941 2.775 3.608 20 0.3373 0.5909 0.8447 1.0983 26.67 mm

1.275 2.275 3.275 4.275 24 0.3881 0.6925 0.9970 1.3014

1 1/2" I.P.S. 1.497 2.497 3.497 4.497 24 0.4557 0.7601 1.0645 1.3689 1 1/2" I.P.S.1.9" O.D. 1.830 3.163 4.497 5.830 32 0.5571 0.9629 1.3689 1.7747 48.26 mm

2.163 3.830 5.497 7.163 40 0.6584 1.1659 1.6734 2.1805

2" I.P.S. 1.955 3.288 4.622 5.956 32 0.5951 1.0009 1.4070 1.8131 2" I.P.S.2.375" O.D. 2.288 3.955 5.622 7.288 40 0.6965 1.2040 1.7114 2.2186 60.32 mm

OBSTRUCTION - square inches OBSTRUCTION - mm2


3/4" O.D. 0.6215 0.7791 0.9367 1.0943 16 400.97 502.64 604.32 706.00 19.05 mm

7/8" O.D. 0.7810 0.9386 1.0962 1.2538 16 503.87 605.55 707.22 808.90 22.22 mm0.8259 1.0229 1.2199 1.4169 20 532.84 659.93 787.03 914.13

1" O.D. 0.9651 1.1227 1.2803 1.4379 16 622.64 724.32 826.00 927.68 25.4 mm1.0100 1.2070 1.4040 1.6010 20 651.61 778.71 905.80 1032.901.0549 1.2913 1.5277 1.7641 24 680.58 833.10 985.61 1138.13

3/4" I.P.S. 1.0456 1.2032 1.3608 1.5184 16 674.58 776.26 877.93 979.61 3/4" I.P.S.1.05" O.D. 1.0905 1.2875 1.4845 1.6815 20 703.55 830.64 957.74 1084.84 26.67 mm

1.1354 1.3718 1.6082 1.8446 24 732.51 885.03 1037.55 1190.06

1 1/2" I.P.S. 3.1048 3.3412 3.5776 3.8140 24 2003.09 2155.61 2308.12 2460.64 1 1/2" I.P.S.1.9" O.D. 3.1946 3.5098 3.8250 4.1402 32 2061.03 2264.38 2467.74 2671.09 48.26 mm

3.2845 3.6785 4.0725 4.4665 40 2119.03 2373.22 2627.41 2882.61

2" I.P.S. 4.7894 5.1046 5.4198 5.7350 32 3089.93 3293.28 3496.64 3699.99 2" I.P.S.2.375" O.D. 4.8793 5.2733 5.6673 6.0613 40 3147.93 3402.12 3656.31 3910.51 60.32 mm

TECHNIFIN Type „LFW“

Size RangeAs per opposite page

Fields of applicationChemical-, Petrochemical-, Oil-, Power IndustryHeat-ExchangersFired HeatersGas Coolers and HeatersTank Heaters

Manufacturing processThe longitudinal I/L or U fins are welded onto the base tubed by resistance weldingor welding with filler metal.

AdvantageIncrease of heat transfer rates for viscous liquids. Perforated fin type used wheneverdrainage of liquid from fin channels become a problem. Widely used in horizontalheat-ex hangers.

MaterialCarbon SteelAlloy SteelStainless SteelNickel Alloy Other Alloys


TECHNIFIN Type „DOUBLE S“

Standard Size Range Type „S“Base Tube O.D.: 31.8 - 57 mmFin Size: 60 - 175 mmFin Pitch: 10 - 30 mmTube Length: 1 - 10 mmFin Thickness: 2 - 3 mm

Field of application:Economisers, Biolers, Heat Exchangers.

Often used in non-corrosive gas streams, minimal resistance to gas flow and the straightgas paths inhibit fouling and ease cleaning.

Manufacturing Process:Square or rectangular fins are welded on two steel base tubes.

Advantages:High efficiency / Minimum power loss / easy cleaning

TechniFin Typ „DOUBLE S“

TECHNIFIN Type „S“

Standard Size Range Type „S“Base Tube O.D.: 31.8 - 57 mmFin Size: 60 - 145 mmFin Pitch: 12.5 - 50 mmTube Length: 1 - 10 mmFin Thickness: 2 - 3 mm



Manufacturing Process:Square or rectangular fins are welded on a steel base tube.


TechniFin Typ „S“


TECHNIFIN Type „DOUBLE S“

Standard Size Range Type „S“Base Tube O.D.: 31.8 - 57 mmFin Size: 60 - 175 mmFin Pitch: 10 - 30 mmTube Length: 1 - 10 mmFin Thickness: 2 - 3 mm



Manufacturing Process:Square or rectangular fins are welded on two steel base tubes.


TechniFin Typ „DOUBLE S“

TECHNIFIN Type „S“

Standard Size Range Type „S“Base Tube O.D.: 31.8 - 57 mmFin Size: 60 - 145 mmFin Pitch: 12.5 - 50 mmTube Length: 1 - 10 mmFin Thickness: 2 - 3 mm



Manufacturing Process:Square or rectangular fins are welded on a steel base tube.


TechniFin Typ „S“


Standard Size Range

Materials:Base Tube & StudsCarbon SteelLow Alloy SteelStainless Steel

Length:Up to 24 meters. If necessary withcircumferential weld, 100% x-rayed. Ifrequired pressure tested.

Studs:General Stud spacing 1/8“ (16mm) = 63 Studrows per meter

Type of Studs:Cylindrical , elliptical or lens type

Standard Tube Dimensions*

Aspect Ratio**Outside Diameter Wallthickness Max. Number of Fi at: NB (max.), T = Stand.

Studs per Row d (max.), h (max.)mm in. mm in. d = 8 mm d = 12,7 mm m2/m Fi

60,3 2.375 3,9 0.154 9 7 0,165 7,9273,0 2.875 5,2 0.203 10 8 0,197 7,6688,9 3.500 5,5 0.216 13 10 0,245 7,66

101,6 4.000 5,7 0.226 15 12 0,283 7,88114,3 4.500 6,0 0.237 17 13 0,321 7,57127,0 5.000 4,0 0.156 18 15 0,374 7,47141,3 5.563 6,6 0.258 21 17 0,402 7,84

152,4 6.000 4,5 0.179 22 18 0,451 7,44159,0 6.260 4,5 0.179 23 19 0,471 7,49168,3 6.625 7,1 0.281 25 20 0,484 7,68219,1 8.625 8,2 0.322 32 26 0,637 7,60

* The Standard Tube Dimensions given in the above table are taken from typical orders. 0f course, we produce studded tubes also with other base tube dimensions in the range 60,3 up to 219,1mm Outside Diameter.

** Calculation of Aspect Ratio: Fi = d x h x NB x NRm + DaDi

TechniStud - Studded Tubes

Standard Size Range:See opposite page

Fields of Application:Furnaces-, Chemical-, Petrochemical-Industry, Power stations etc.where liquid media under high pressure are to be heated or cooled.

Advantages

Due to their high rigidity, studded tubes can be used even underextreme temperature and pressure conditions.

Manufacturing Process:Studs are fully automatically welded onto thentube by resistance wel-ding.


Standard Size Range

Materials:Base Tube & StudsCarbon SteelLow Alloy SteelStainless Steel

Length:Up to 24 meters. If necessary withcircumferential weld, 100% x-rayed. Ifrequired pressure tested.

Studs:General Stud spacing 1/8“ (16mm) = 63 Studrows per meter

Type of Studs:Cylindrical , elliptical or lens type

Standard Tube Dimensions*

Aspect Ratio**Outside Diameter Wallthickness Max. Number of Fi at: NB (max.), T = Stand.

Studs per Row d (max.), h (max.)mm in. mm in. d = 8 mm d = 12,7 mm m2/m Fi

60,3 2.375 3,9 0.154 9 7 0,165 7,9273,0 2.875 5,2 0.203 10 8 0,197 7,6688,9 3.500 5,5 0.216 13 10 0,245 7,66

101,6 4.000 5,7 0.226 15 12 0,283 7,88114,3 4.500 6,0 0.237 17 13 0,321 7,57127,0 5.000 4,0 0.156 18 15 0,374 7,47141,3 5.563 6,6 0.258 21 17 0,402 7,84

152,4 6.000 4,5 0.179 22 18 0,451 7,44159,0 6.260 4,5 0.179 23 19 0,471 7,49168,3 6.625 7,1 0.281 25 20 0,484 7,68219,1 8.625 8,2 0.322 32 26 0,637 7,60

* The Standard Tube Dimensions given in the above table are taken from typical orders. 0f course, we produce studded tubes also with other base tube dimensions in the range 60,3 up to 219,1mm Outside Diameter.

** Calculation of Aspect Ratio: Fi = d x h x NB x NRm + DaDi

TechniStud - Studded Tubes

Standard Size Range:See opposite page

Fields of Application:Furnaces-, Chemical-, Petrochemical-Industry, Power stations etc.where liquid media under high pressure are to be heated or cooled.

Advantages

Due to their high rigidity, studded tubes can be used even underextreme temperature and pressure conditions.

Manufacturing Process:Studs are fully automatically welded onto thentube by resistance wel-ding.


Floor Plates

Weight in kilograms per Plate - Tear Drop Plattern

Plate Size Thickness (O/P) on Plainin mm 3 mm 4,5 mm 6 mm 8 mm 10 mm 12,5 mm

Weight perSquare metre 26,19k 37,97k 49,74k 65,44k 81,14k 100,77k

2000 x 1000 53 76 100 131 163 2022500 x 1250 82 119 156 205 254 3153000 x 1500 118 171 224 295 366 4544000 x 1750 184 266 349 459 568 7064000 x 2000 210 304 397 524 649 806 6000 x 2000 314 456 597 785 974 1209

StandardThickness 8/3 (743 mm) 10/3 (908 mm) 12/3 (1070 mm)

kg/m m/tonne kg/m m/tonne kg/m m/tonne

,425 2,50 400 3,05 328 3,59 278,50 2,94 341 3,59 279 4,23 236,60 3,52 284 4,31 232 5,07 197,70 4,11 243 5,02 199 5,92 169,80 4,70 213 5,74 174 6,77 148,90 5,28 192 6,45 156 7,61 1331,00 5,87 170 7,17 139 8,46 1181,20 7,05 142 8,61 116 10,15 991,60 9,40 106 11,48 87 13,53 742,00 11,75 85 14,35 70 16,92 59

Description Width

Sheets before corrugating

8/3 corrugations 74310/3 corrugations 90812/3 corrugations 1070

Sheets after corrugating(distance between the crowns of the outisde corrugations)

8/3 corrugations 610 ± 510/3 corrugations 762 ± 5 12/3 corrugations 908 ± 6

Galvanizsed Corrugated Sheets - BS 3083 : 1980

0,4 6 100,5 8 130,6 10 150,7 11 180,8 13 200,9 14 23

1,0 16 251,2 19 301,6 26 40 58

2,0 32 50 72 1283,0 48 75 108 192 300 288 384 480 6004,0 64 100 144 256 400 384 512 640 8005,0 80 125 180 320 500 480 640 800 10006,0 96 150 216 384 600 576 768 960 12007,0 112 175 252 448 700 672 896 1120 1400 20168,0 128 200 288 512 800 768 1025 1280 1600 23049,0 144 225 324 576 900 864 1152 1440 1800 2592

10,0 160 250 360 540 1000 960 1280 1600 2000 288012,0 192 300 432 768 1200 1152 1555 1536 1920 2400 345612,5 200 330 450 800 1250 1200 1620 1600 2000 2500 360015,0 240 375 540 960 1500 1440 1944 1920 2400 3000 4320

20,0 320 500 720 1280 2000 1920 2592 2560 3200 4000 576025,0 400 625 900 1600 2500 2400 3240 3200 4000 5000

30,0 480 750 1080 1920 3000 2880 3888 3840 480035,0 560 875 1260 2240 3500 3660 4536 4480 5600

40,0 640 1000 1440 2560 4000 3740 5184 512045,0 720 1125 1620 2880 4500 432050,0 800 1250 1800 3200 5000 480055,0 880 1375 1980 3520

60,0 960 1500 216065,0 1040 1625 2340 416070,0 1120 1750 2520 448075,0 1200 1875 2700 4800

80,0 1280 2000 2880 512085,0 1360 2125 3060

95,0 1520 2375 3420

100,0 1600 2500 3600120,0 1920 6000 4320140,0 2240 3500 5040160,0 2560 4000180,0 2880 4500

200,0 3220 5000220,0 3540 5500

Thickness 2000mm 2500mm 3000mm 4000mm 5000mm 6000mm 6000mm 8000mm 8000mm 10000mm 12000mmmm x x x x x x x x x x x

1000mm 1250mm 1500mm 2000mm 2500mm 2000mm 2700mm 2000mm 2500mm 2500mm 3000mm

Steel Sheets and PlatesStandard Sizes, Thickness and approximate Weight per Piece

Weight Formula Plates:Thickness (MM) x WIdth (METERS) x LENGTH (METERS) x 8 = Kg/Piece


Floor Plates

Weight in kilograms per Plate - Tear Drop Plattern

Plate Size Thickness (O/P) on Plainin mm 3 mm 4,5 mm 6 mm 8 mm 10 mm 12,5 mm

Weight perSquare metre 26,19k 37,97k 49,74k 65,44k 81,14k 100,77k

2000 x 1000 53 76 100 131 163 2022500 x 1250 82 119 156 205 254 3153000 x 1500 118 171 224 295 366 4544000 x 1750 184 266 349 459 568 7064000 x 2000 210 304 397 524 649 806 6000 x 2000 314 456 597 785 974 1209

StandardThickness 8/3 (743 mm) 10/3 (908 mm) 12/3 (1070 mm)

kg/m m/tonne kg/m m/tonne kg/m m/tonne

,425 2,50 400 3,05 328 3,59 278,50 2,94 341 3,59 279 4,23 236,60 3,52 284 4,31 232 5,07 197,70 4,11 243 5,02 199 5,92 169,80 4,70 213 5,74 174 6,77 148,90 5,28 192 6,45 156 7,61 1331,00 5,87 170 7,17 139 8,46 1181,20 7,05 142 8,61 116 10,15 991,60 9,40 106 11,48 87 13,53 742,00 11,75 85 14,35 70 16,92 59

Description Width

Sheets before corrugating

8/3 corrugations 74310/3 corrugations 90812/3 corrugations 1070

Sheets after corrugating(distance between the crowns of the outisde corrugations)

8/3 corrugations 610 ± 510/3 corrugations 762 ± 5 12/3 corrugations 908 ± 6

Galvanizsed Corrugated Sheets - BS 3083 : 1980

0,4 6 100,5 8 130,6 10 150,7 11 180,8 13 200,9 14 23

1,0 16 251,2 19 301,6 26 40 58

2,0 32 50 72 1283,0 48 75 108 192 300 288 384 480 6004,0 64 100 144 256 400 384 512 640 8005,0 80 125 180 320 500 480 640 800 10006,0 96 150 216 384 600 576 768 960 12007,0 112 175 252 448 700 672 896 1120 1400 20168,0 128 200 288 512 800 768 1025 1280 1600 23049,0 144 225 324 576 900 864 1152 1440 1800 2592

10,0 160 250 360 540 1000 960 1280 1600 2000 288012,0 192 300 432 768 1200 1152 1555 1536 1920 2400 345612,5 200 330 450 800 1250 1200 1620 1600 2000 2500 360015,0 240 375 540 960 1500 1440 1944 1920 2400 3000 4320

20,0 320 500 720 1280 2000 1920 2592 2560 3200 4000 576025,0 400 625 900 1600 2500 2400 3240 3200 4000 5000

30,0 480 750 1080 1920 3000 2880 3888 3840 480035,0 560 875 1260 2240 3500 3660 4536 4480 5600

40,0 640 1000 1440 2560 4000 3740 5184 512045,0 720 1125 1620 2880 4500 432050,0 800 1250 1800 3200 5000 480055,0 880 1375 1980 3520

60,0 960 1500 216065,0 1040 1625 2340 416070,0 1120 1750 2520 448075,0 1200 1875 2700 4800

80,0 1280 2000 2880 512085,0 1360 2125 3060

95,0 1520 2375 3420

100,0 1600 2500 3600120,0 1920 6000 4320140,0 2240 3500 5040160,0 2560 4000180,0 2880 4500

200,0 3220 5000220,0 3540 5500

Thickness 2000mm 2500mm 3000mm 4000mm 5000mm 6000mm 6000mm 8000mm 8000mm 10000mm 12000mmmm x x x x x x x x x x x

1000mm 1250mm 1500mm 2000mm 2500mm 2000mm 2700mm 2000mm 2500mm 2500mm 3000mm

Steel Sheets and PlatesStandard Sizes, Thickness and approximate Weight per Piece

Weight Formula Plates:Thickness (MM) x WIdth (METERS) x LENGTH (METERS) x 8 = Kg/Piece


Weight specification - Flat Rolled Steel

width in 2 3 4 5 6 8 9 10 12 14 15

mm

4 0,06 0,095 0,08 0,12 0,16

6 0,09 0,14 0,19 0,248 0,13 0,19 0,25 0,32 0,38

10 0,16 0,24 0,31 0,39 0,47 0,63 0,7112 0,19 0,28 0,38 0,47 0,57 0,75 0,85 0,94

14 0,22 0,33 0,44 0,55 0,66 0,88 0,99 1,10 1,3215 0,24 0,35 0,47 0,59 0,71 0,94 1,06 1,18 1,41 1,65

16 0,25 0,38 0,50 0,63 0,75 1,01 1,13 1,26 1,51 1,76 1,8818 0,28 0,42 0,57 0,71 0,85 1,13 1,27 1,41 1,70 1,98 2,12

20 0,31 0,47 0,63 0,79 0,94 1,26 1,41 1,57 1,88 2,20 2,3622 0,34 0,52 0,69 0,86 1,04 1,38 1,55 1,73 2,07 2,42 2,59

24 0,38 0,57 0,75 0,94 1,13 1,51 1,70 1,88 2,26 2,64 2,8325 0,39 0,59 0,79 0,98 1,18 1,57 1,77 1,96 2,36 2,75 2,94

26 0,41 0,61 0,82 1,02 1,23 1,63 1,84 2,04 2,45 2,86 3,0628 0,44 0,66 0,88 1,10 1,32 1,76 1,98 2,20 2,64 3,08 3,30

30 0,47 0,71 0,94 1,18 1,41 1,88 2,12 2,36 2,83 3,30 3,5332 0,50 0,75 1,00 1,26 1,51 2,01 2,26 2,51 3,01 3,52 3,77

35 0,55 0,82 1,10 1,37 1,65 2,20 2,47 2,75 3,30 3,85 4,1240 0,63 0,94 1,26 1,57 1,88 2,51 2,83 3,14 3,77 4,40 4,71

45 0,71 1,06 1,41 1,77 2,12 2,83 3,18 3,53 4,24 4,95 5,3050 0,78 1,18 1,57 1,96 2,36 3,14 3,53 3,93 4,71 5,50 5,89

55 0,86 1,30 1,73 2,16 2,59 3,45 3,89 4,32 5,18 6,05 6,4860 0,94 1,41 1,88 2,36 2,83 3,77 4,24 4,71 5,65 6,59 7,07

65 1,02 1,53 2,04 2,55 3,06 4,08 4,59 5,10 6,12 7,14 7,6570 1,10 1,65 2,20 2,75 3,30 4,40 4,95 5,50 6,59 77,69 8,24

75 1,18 1,77 2,36 2,94 3,53 4,71 5,30 5,89 7,07 8,24 8,8380 1,26 1,88 2,51 3,14 3,77 5,02 5,65 6,28 7,54 8,79 9,42

85 1,33 2,00 2,67 3,34 4,00 5,34 6,01 6,67 8,01 9,34 10,090 1,41 2,12 2,83 3,53 4,24 5,65 6,36 7,07 8,48 9,89 10,6

95 1,49 2,24 2,98 3,73 4,47 5,97 6,71 7,46 8,95 10,4 11,2100 1,57 2,36 3,14 3,93 4,71 6,28 7,07 7,85 9,42 11,0 11,8

110 1,73 2,59 3,45 4,32 5,18 6,91 7,77 8,64 10,4 12,1 13,0120 1,88 2,83 3,77 4,71 5,65 7,54 8,48 9,42 11,3 13,2 14,1

130 2,04 3,06 4,08 5,10 6,12 8,16 9,18 10,2 12,3 14,3 15,3140 2,20 3,30 4,40 55,50 6,59 8,79 9,89 11,0 13,2 15,4 16,5

150 2,36 3,53 4,71 5,89 7,07 9,42 10,6 11,8 14,1 16,5 17,7160 2,51 3,77 5,02 6,28 7,51 10,1 11,3 12,6 15,1 17,6 18,8

180 2,83 4,24 5,65 7,07 8,48 11,3 12,7 14,1 17,0 19,8 21,2200 3,14 4,71 6,28 7,85 9,42 12,6 14,1 15,7 18,8 22,0 23,6

250 3,93 5,89 7,85 9,81 11,8 15,7 17,7 19,6 23,6 27,5 29,4300 4,71 7,07 9,42 11,8 14,1 18,8 21,2 23,6 28,3 33,0 35,3

thickness in mm

16 18 20 25 30 35 40 45 50 60

2,26

2,51 2,832,76 3,11 3,45

3,01 3,39 3,773,14 3,53 3,93

3,27 3,67 4,083,52 3,96 4,40 5,50

3,î7 4,24 4,71 5,894,02 4,52 5,02 6,28 7,54

4,40 4,95 5,50 6,87 8,245,02 5,65 6,28 7,85 9,42 11,0

5,65 6,36 7,07 8,83 10,6 12,4 14,26,28 7,07 7,85 9,81 11,8 13,7 15,7 17,6

6,91 7,77 8,64 10,8 13,0 15,1 17,3 19,4 21,67,54 8,48 9,42 11,8 14,1 16,5 18,8 21,2 23,6

8,16 9,18 10,2 12,8 15,3 17,9 20,4 22,9 25,58,79 9,89 11,0 13,7 16,5 19,2 22,0 24,7 27,5

9,42 10,6 11,8 14,7 17,7 20,6 23,6 26,5 29,410,0 11,3 12,6 15,7 18,8 22,0 25,1 28,3 31,4 37,7

10,7 12,0 13,3 16,7 20,0 23,4 26,7 30,0 33,4 40,011,3 12,7 14,1 17,7 21,2 24,7 28,3 31,8 35,3 42,4

11,9 13,4 14,9 18,6 22,4 26,1 29,8 33,6 37,4 44,812,6 14,1 15,7 19,6 23,6 27,5 31,4 35,3 39,3 46,8

13,8 15,5 17,3 21,6 25,9 30,2 34,5 38,8 43,2 51,815,1 17,0 18,8 23,6 28,3 33,0 37,7 42,4 47,1 56,5

16,3 18,4 20,4 25,5 30,6 35,7 40,8 45,9 51,0 61,317,0 19,8 22,0 27,5 33,0 38,5 44,0 49,5 55,0 66,0

18,8 21,2 23,6 29,4 35,3 41,2 47,1 53,0 58,9 70,720,1 22,6 25,1 31,4 37,7 44,0 50,2 56,5 62,8 75,4

22,6 25,4 28,3 35,3 42,4 49,5 56,5 63,6 70,7 84,825, 1 28,3 31,4 39,3 47,1 55,0 62,8 70,6 78,5 94,2

31,4 35,3 39,3 49,1 58,9 68,7 78,5 88,3 98,1 118,037,7 42,3 47,1 58,9 70,7 82,4 94,2 106,0 118,0 141,0

Weight specification - Round, Square and Hexagon Steel

mm mm mm mm

3 0,056 0,070 0,061 23 3,26 4,15 3,60 50 15,4 19,6 17,0 130 104 133 115

3.5 0,076 0,100 0,083 24 3,55 4,52 3,91 53 17,3 22,1 19,1 135 112 143 124

4 0,099 0,126 0,109 25 3,85 4,91 4,25 55 18,7 23,8 20,6 140 121 154 133

4.5 0,125 0,159 0,138 26 4,17 5,31 4,60 58 20,7 26,4 22,9 145 130 165 143

5 0,154 0,196 0,170 27 4,50 5,72 4,96 60 22,2 28,3 24,5 150 139 177 153

5,5 0,187 0,237 0,206 28 4,83 6,15 5,33 63 24,5 31,2 27,0 160 158 201 174

6 0,222 0,283 0,245 29 5,19 6,61 5,72 65 26,0 33,2 28,7 170 178 227 197

7 0,302 0,385 0,333 30 5,55 7,07 6,12 68 28,5 36,3 31,4 180 200 254 220

8 0,395 0,502 0,435 31 5,92 7,54 6,54 70 30,2 38,5 33,3 190 223 283 245

9 0,499 0,636 0,551 32 6,31 8,04 6,96 73 32,9 41,8 36,3 200 247 314 272

10 0,617 0,785 0,680 33 6,71 8,55 7,41 75 34,7 44,2 38,3 210 272 346 300

11 0,746 0,950 0,823 34 7,13 9,07 7,86 78 37,5 47,8 41,4 220 298 380 329

12 0,888 1,13 0,980 35 7,55 9,62 8,33 80 39,5 50,2 43,5 230 326 415 360

13 1,04 1,33 1,15 36 7,99 10,2 8,81 83 42,5 54,4 46,9 240 355 452 392

14 1,21 1,54 1,33 37 8,44 10,7 9,31 85 44,5 56,7 49,1 250 385 491 425

15 1,39 1,77 1,53 38 8,90 11,3 9,82 90 49,9 63,6 55,1 260 417 531 460

16 1,58 2,01 1,74 39 9,38 11,9 10,3 95 55,6 70,8 61,4 270 450 572 496

17 1,78 2,27 1,96 40 9,87 12,6 10,9 100 61,7 78,5 68,0 280 483 615 533

18 2,00 2,54 2,20 41 10,4 13,2 11,4 105 68,0 86,6 75,0 290 519 660 572

19 2,23 2,83 2,45 42 10,9 13,9 12,0 110 74,6 95,0 82,2 300 555 707 612

20 2,47 3,14 2,72 45 12,5 15,9 13,8 115 81,5 104,0 89,9

21 2,72 3,46 3,00 46 13,0 16,6 14,4 120 88,8 113,0 97,9

22 2,98 3,80 3,29 48 14,2 18,1 15,7 125 96,3 123,0 106,0

Based on Density 7,85 kg/dm3

Standard Size and Tolerances - Cold drawn steel

size ISO h 6 ISO h 7 ISO h 8 ISO h 9 ISO h 11 ISO h 11

mm DIN 59361 DIN 59360 DIN 670 DIN 671 DIN 668 DIN 176

DIN 669 DIN 178

DIN 175

> 1 - 3 -0,006 -0,010 -0,014 -0,025 -0,060 -0,060

> 3 - 6 -0,008 -0,012 -0,018 -0,030 -0,075 -0,075

> 6 - 10 -0,009 -0,015 -0,022 -0,036 -0,090 -0,090

> 10 - 18 -0,011 -0,018 -0,027 -0,043 -0,110 -0,110

> 18 - 30 -0,013 -0,021 -0,033 -0,052 -0,130 -0,130

> 30 - 50 -0,016 -0,025 -0,039 -0,062 -0,160 -0,160

> 50 - 65 -0,019 -0,030 -0,046 -0,074 -0,190 -0,190

> 65 - 80 -0,019 -0,030 -0,046 -0,074 -0,190 -0,300

> 80 - 120 -0,022 -0,035 -0,054 -0,087 -0,220

> 120 - 180 -0,100 -0,250


Weight specification - Flat Rolled Steel

width in 2 3 4 5 6 8 9 10 12 14 15

mm

4 0,06 0,095 0,08 0,12 0,16

6 0,09 0,14 0,19 0,248 0,13 0,19 0,25 0,32 0,38

10 0,16 0,24 0,31 0,39 0,47 0,63 0,7112 0,19 0,28 0,38 0,47 0,57 0,75 0,85 0,94

14 0,22 0,33 0,44 0,55 0,66 0,88 0,99 1,10 1,3215 0,24 0,35 0,47 0,59 0,71 0,94 1,06 1,18 1,41 1,65

16 0,25 0,38 0,50 0,63 0,75 1,01 1,13 1,26 1,51 1,76 1,8818 0,28 0,42 0,57 0,71 0,85 1,13 1,27 1,41 1,70 1,98 2,12

20 0,31 0,47 0,63 0,79 0,94 1,26 1,41 1,57 1,88 2,20 2,3622 0,34 0,52 0,69 0,86 1,04 1,38 1,55 1,73 2,07 2,42 2,59

24 0,38 0,57 0,75 0,94 1,13 1,51 1,70 1,88 2,26 2,64 2,8325 0,39 0,59 0,79 0,98 1,18 1,57 1,77 1,96 2,36 2,75 2,94

26 0,41 0,61 0,82 1,02 1,23 1,63 1,84 2,04 2,45 2,86 3,0628 0,44 0,66 0,88 1,10 1,32 1,76 1,98 2,20 2,64 3,08 3,30

30 0,47 0,71 0,94 1,18 1,41 1,88 2,12 2,36 2,83 3,30 3,5332 0,50 0,75 1,00 1,26 1,51 2,01 2,26 2,51 3,01 3,52 3,77

35 0,55 0,82 1,10 1,37 1,65 2,20 2,47 2,75 3,30 3,85 4,1240 0,63 0,94 1,26 1,57 1,88 2,51 2,83 3,14 3,77 4,40 4,71

45 0,71 1,06 1,41 1,77 2,12 2,83 3,18 3,53 4,24 4,95 5,3050 0,78 1,18 1,57 1,96 2,36 3,14 3,53 3,93 4,71 5,50 5,89

55 0,86 1,30 1,73 2,16 2,59 3,45 3,89 4,32 5,18 6,05 6,4860 0,94 1,41 1,88 2,36 2,83 3,77 4,24 4,71 5,65 6,59 7,07

65 1,02 1,53 2,04 2,55 3,06 4,08 4,59 5,10 6,12 7,14 7,6570 1,10 1,65 2,20 2,75 3,30 4,40 4,95 5,50 6,59 77,69 8,24

75 1,18 1,77 2,36 2,94 3,53 4,71 5,30 5,89 7,07 8,24 8,8380 1,26 1,88 2,51 3,14 3,77 5,02 5,65 6,28 7,54 8,79 9,42

85 1,33 2,00 2,67 3,34 4,00 5,34 6,01 6,67 8,01 9,34 10,090 1,41 2,12 2,83 3,53 4,24 5,65 6,36 7,07 8,48 9,89 10,6

95 1,49 2,24 2,98 3,73 4,47 5,97 6,71 7,46 8,95 10,4 11,2100 1,57 2,36 3,14 3,93 4,71 6,28 7,07 7,85 9,42 11,0 11,8

110 1,73 2,59 3,45 4,32 5,18 6,91 7,77 8,64 10,4 12,1 13,0120 1,88 2,83 3,77 4,71 5,65 7,54 8,48 9,42 11,3 13,2 14,1

130 2,04 3,06 4,08 5,10 6,12 8,16 9,18 10,2 12,3 14,3 15,3140 2,20 3,30 4,40 55,50 6,59 8,79 9,89 11,0 13,2 15,4 16,5

150 2,36 3,53 4,71 5,89 7,07 9,42 10,6 11,8 14,1 16,5 17,7160 2,51 3,77 5,02 6,28 7,51 10,1 11,3 12,6 15,1 17,6 18,8

180 2,83 4,24 5,65 7,07 8,48 11,3 12,7 14,1 17,0 19,8 21,2200 3,14 4,71 6,28 7,85 9,42 12,6 14,1 15,7 18,8 22,0 23,6

250 3,93 5,89 7,85 9,81 11,8 15,7 17,7 19,6 23,6 27,5 29,4300 4,71 7,07 9,42 11,8 14,1 18,8 21,2 23,6 28,3 33,0 35,3

thickness in mm

16 18 20 25 30 35 40 45 50 60

2,26

2,51 2,832,76 3,11 3,45

3,01 3,39 3,773,14 3,53 3,93

3,27 3,67 4,083,52 3,96 4,40 5,50

3,î7 4,24 4,71 5,894,02 4,52 5,02 6,28 7,54

4,40 4,95 5,50 6,87 8,245,02 5,65 6,28 7,85 9,42 11,0

5,65 6,36 7,07 8,83 10,6 12,4 14,26,28 7,07 7,85 9,81 11,8 13,7 15,7 17,6

6,91 7,77 8,64 10,8 13,0 15,1 17,3 19,4 21,67,54 8,48 9,42 11,8 14,1 16,5 18,8 21,2 23,6

8,16 9,18 10,2 12,8 15,3 17,9 20,4 22,9 25,58,79 9,89 11,0 13,7 16,5 19,2 22,0 24,7 27,5

9,42 10,6 11,8 14,7 17,7 20,6 23,6 26,5 29,410,0 11,3 12,6 15,7 18,8 22,0 25,1 28,3 31,4 37,7

10,7 12,0 13,3 16,7 20,0 23,4 26,7 30,0 33,4 40,011,3 12,7 14,1 17,7 21,2 24,7 28,3 31,8 35,3 42,4

11,9 13,4 14,9 18,6 22,4 26,1 29,8 33,6 37,4 44,812,6 14,1 15,7 19,6 23,6 27,5 31,4 35,3 39,3 46,8

13,8 15,5 17,3 21,6 25,9 30,2 34,5 38,8 43,2 51,815,1 17,0 18,8 23,6 28,3 33,0 37,7 42,4 47,1 56,5

16,3 18,4 20,4 25,5 30,6 35,7 40,8 45,9 51,0 61,317,0 19,8 22,0 27,5 33,0 38,5 44,0 49,5 55,0 66,0

18,8 21,2 23,6 29,4 35,3 41,2 47,1 53,0 58,9 70,720,1 22,6 25,1 31,4 37,7 44,0 50,2 56,5 62,8 75,4

22,6 25,4 28,3 35,3 42,4 49,5 56,5 63,6 70,7 84,825, 1 28,3 31,4 39,3 47,1 55,0 62,8 70,6 78,5 94,2

31,4 35,3 39,3 49,1 58,9 68,7 78,5 88,3 98,1 118,037,7 42,3 47,1 58,9 70,7 82,4 94,2 106,0 118,0 141,0

Weight specification - Round, Square and Hexagon Steel

mm mm mm mm

3 0,056 0,070 0,061 23 3,26 4,15 3,60 50 15,4 19,6 17,0 130 104 133 115

3.5 0,076 0,100 0,083 24 3,55 4,52 3,91 53 17,3 22,1 19,1 135 112 143 124

4 0,099 0,126 0,109 25 3,85 4,91 4,25 55 18,7 23,8 20,6 140 121 154 133

4.5 0,125 0,159 0,138 26 4,17 5,31 4,60 58 20,7 26,4 22,9 145 130 165 143

5 0,154 0,196 0,170 27 4,50 5,72 4,96 60 22,2 28,3 24,5 150 139 177 153

5,5 0,187 0,237 0,206 28 4,83 6,15 5,33 63 24,5 31,2 27,0 160 158 201 174

6 0,222 0,283 0,245 29 5,19 6,61 5,72 65 26,0 33,2 28,7 170 178 227 197

7 0,302 0,385 0,333 30 5,55 7,07 6,12 68 28,5 36,3 31,4 180 200 254 220

8 0,395 0,502 0,435 31 5,92 7,54 6,54 70 30,2 38,5 33,3 190 223 283 245

9 0,499 0,636 0,551 32 6,31 8,04 6,96 73 32,9 41,8 36,3 200 247 314 272

10 0,617 0,785 0,680 33 6,71 8,55 7,41 75 34,7 44,2 38,3 210 272 346 300

11 0,746 0,950 0,823 34 7,13 9,07 7,86 78 37,5 47,8 41,4 220 298 380 329

12 0,888 1,13 0,980 35 7,55 9,62 8,33 80 39,5 50,2 43,5 230 326 415 360

13 1,04 1,33 1,15 36 7,99 10,2 8,81 83 42,5 54,4 46,9 240 355 452 392

14 1,21 1,54 1,33 37 8,44 10,7 9,31 85 44,5 56,7 49,1 250 385 491 425

15 1,39 1,77 1,53 38 8,90 11,3 9,82 90 49,9 63,6 55,1 260 417 531 460

16 1,58 2,01 1,74 39 9,38 11,9 10,3 95 55,6 70,8 61,4 270 450 572 496

17 1,78 2,27 1,96 40 9,87 12,6 10,9 100 61,7 78,5 68,0 280 483 615 533

18 2,00 2,54 2,20 41 10,4 13,2 11,4 105 68,0 86,6 75,0 290 519 660 572

19 2,23 2,83 2,45 42 10,9 13,9 12,0 110 74,6 95,0 82,2 300 555 707 612

20 2,47 3,14 2,72 45 12,5 15,9 13,8 115 81,5 104,0 89,9

21 2,72 3,46 3,00 46 13,0 16,6 14,4 120 88,8 113,0 97,9

22 2,98 3,80 3,29 48 14,2 18,1 15,7 125 96,3 123,0 106,0

Based on Density 7,85 kg/dm3

Standard Size and Tolerances - Cold drawn steel

size ISO h 6 ISO h 7 ISO h 8 ISO h 9 ISO h 11 ISO h 11

mm DIN 59361 DIN 59360 DIN 670 DIN 671 DIN 668 DIN 176

DIN 669 DIN 178

DIN 175

> 1 - 3 -0,006 -0,010 -0,014 -0,025 -0,060 -0,060

> 3 - 6 -0,008 -0,012 -0,018 -0,030 -0,075 -0,075

> 6 - 10 -0,009 -0,015 -0,022 -0,036 -0,090 -0,090

> 10 - 18 -0,011 -0,018 -0,027 -0,043 -0,110 -0,110

> 18 - 30 -0,013 -0,021 -0,033 -0,052 -0,130 -0,130

> 30 - 50 -0,016 -0,025 -0,039 -0,062 -0,160 -0,160

> 50 - 65 -0,019 -0,030 -0,046 -0,074 -0,190 -0,190

> 65 - 80 -0,019 -0,030 -0,046 -0,074 -0,190 -0,300

> 80 - 120 -0,022 -0,035 -0,054 -0,087 -0,220

> 120 - 180 -0,100 -0,250


European Beams with Parallel-Faced FlangesIPE 80-600 shapes in accordance with Euronorm 19-57.

European Standard Beams

Section Dimensionskg/m h b a e

mm mm mm mm


mm mm mm mm

IPE 80 6,00 80,0 46 3,8 5,2

IPE 100 8,10 100,0 55 4,1 5,7

IPE A 120 8,66 117,6 64 3,8 5,1IPE 120 10,40 120,0 64 4,4 6,3

IPE A 140 10,50 137,4 73 3,8 5,6IPE 140 12,90 140,0 73 4,7 6,9IPE R 140 14,40 142,0 72 5,3 7,8

IPE A 160 12,70 157,0 82 4,0 5,9IPE 160 15,80 160,0 82 5,0 7,4IPE R 160 17,70 162,0 81 5,6 8,5

IPE A 180 15,40 177,0 91 4,3 6,5IPE 180 18,80 180,0 91 5,3 8,0IPE O 180 21,30 182,0 95 6,0 9,0IPE R 180 22,10 183,0 89 6,4 9,5


IPE A 220 22,20 217,0 110 5 7,7IPE 220 26,20 220,0 110 5,9 9,2IPE O 220 29,40 222,0 112 6,6 10,2IPE R 220 31,60 25,0 108 6,7 11,8





IPE A 360 50,2 357,6 170 6,6 11,5IPE 360 57,1 360 170 8,0 12,7IPE O 360 66,0 364 172 9,2 14,7IPE R 360 70,3 366 167 9,9 16,0

IPE A 400 57,4 397 180 7,0 12,0IPE 400 66,3 400 187 8,6 13,5IPE O 400 75,7 404 182 9,7 15,5IPE R 400 81,5 407 178 10,6 17,0IPE V 400 84,0 408 182 10,6 17,5





IPE 750 x 137 137,0 753 563 11,5 17,0IPE 750 x 147 147,0 753 265 13,2 17,0IPE 750 x 161 161,0 758 266 13,8 19,3IPE 750 x 173 173,0 762 267 14,4 21,6IPE 750 x 185 185,0 766 267 14,9 23,6IPE 750 x 196 196,0 770 268 15,6 25,4IPE 750 x 210 210,0 775 268 16,0 28,0IPE 750 x 222 222,0 778 269 17,0 29,5


mm mm mm mm

IPN 300 54,2 300 125 10,8 16,2IPN 320 61,0 320 131 11,5 17,3IPN 340 68,0 340 137 12,2 18,3IPN 360 76,1 360 143 13,0 19,5IPN 380 84,0 380 149 13,7 20,5

IPN 400 92,4 400 155 14,4 21,6IPN 450 115,0 450 170 16,2 24,3

IPN 500 141,0 500 185 18,0 27,0IPN 550 166,0 550 200 19,0 30,0


mm mm mm mm

IPN 160 17,9 160 74 6,3 9,5IPN 180 21,9 180 82 6,9 10,4


Flange slope 14 %.

European Wide Flange Beams HEHE A, HE B, HE C, and HE M shapes in accordance with Euronorm 63,62.


mm mm mm mm


mm mm mm mm

HE 340 AA 78,9 320 300 8,5 11,5HE 340 A 105 330 300 9,5 16,5DIL 340 128 340 300 9,5 21,5 HE 340 B 134 340 300 12 21,5HE 340 M 238 377 309 21 40

HE 360 AA 83,7 339 300 9 12HE 360 A 112 350 300 10 17,5DIL 360 136 360 300 10 22,5HE 360 B 142 360 300 12,5 22,5HE 360 M 250 395 309 21 40

HE 400 AA 92,4 378 300 9,5 13HE 400 A 125 390 300 11 19DIL 400 148 400 300 11 24HE 400 B 155 400 300 13,5 24HE 400 M 256 432 307 21 40

HE 450 AA 99,7 425 300 10 12,5HE 450 A 140 440 300 11,5 21DIL 450 163 450 300 11,5 26HE 450 B 171 450 300 14 26HE 450 M 263 478 307 21 40

HE 500 AA 107 472 300 10,5 14HE 500 A 155 490 300 12 23DIL 500 179 500 300 12 28HE 500 B 187 500 300 14,5 28HE 500 M 270 524 306 21 40

HE 550 AA 120 522 300 11,5 15HE 550 A 166 540 300 12,5 24DIL 550 190 550 300 12,5 29HE 500 B 199 550 300 15 29HE 500 M 278 572 306 21 40

HE 600 AA 129 571 300 12 15,5HE 600 A 178 590 300 13 25DIL 600 201 600 300 13 30HE 600 B 212 600 300 15,5 30HE 600 M 285 620 305 21 40

HE 650 AA 138 62 0300 12,5 16HE 650 A 190 640 300 13,5 26DIL 650 B 225 650 300 16 31HE 650 M 293 668 305 21 40

HE 700 AA 150 670 300 13 17HE 700 A 204 690 300 14,5 27DIL 700 B 241 700 300 17 32HE 700 M 301 716 304 21 40

HE 800 AA 172 770 300 14 18HE 800 A 224 790 300 15 28DIL 800 B 262 800 300 17,5 33HE 800 M 317 814 303 21 40

HE 900 AA 198 870 300 15 20HE 900 A 252 890 300 16 30DIL 900 B 291 900 300 18,5 35HE 900 M 333 910 302 21 40

HE 1000 AA 222 970 300 16 21HE 1000 A 990 300 16,5 31DIL 1000 B 314 1000 300 19 36HE 1000 M 349 1008 302 21 40

HE 100 AA 12,2 91 100 4,2 5,5HE 100 A 16,7 96 100 5,0 8,0DIL 100 19,8 100 100 5,0 10,0HE 100 B 20,4 100 100 6,0 10,0HE 100 M 41,8 120 106 12,0 20,0









HE 280 AA 61,2 264 280 7 10HE 280 A 76,4 270 280 8 13DIL 280 98,3 28 0280 8 18HE 280 B 103 280 280 10,5 18HE 280 M 189 310 288 18,5 33

HE 300 AA 69,8 283 300 7,5 10,5HE 300 A 88,3 290 300 8,5 14DIL 300 112 300 300 8,5 19HE 300 B 117 300 300 11 19HE 300 C 177 320 305 16 29HE 300 M 238 340 310 21 39

HE 320 AA 74,2 301 300 8 11HE 320 A 97,6 310 300 9 15,5DIL 320 121 320 300 9 20,5HE 320 B 127 32 0300 11,5 20,5HE 320 M 245 359 309 21 40


European Beams with Parallel-Faced FlangesIPE 80-600 shapes in accordance with Euronorm 19-57.

European Standard Beams


mm mm mm mm


mm mm mm mm

IPE 80 6,00 80,0 46 3,8 5,2

IPE 100 8,10 100,0 55 4,1 5,7

IPE A 120 8,66 117,6 64 3,8 5,1IPE 120 10,40 120,0 64 4,4 6,3

IPE A 140 10,50 137,4 73 3,8 5,6IPE 140 12,90 140,0 73 4,7 6,9IPE R 140 14,40 142,0 72 5,3 7,8

IPE A 160 12,70 157,0 82 4,0 5,9IPE 160 15,80 160,0 82 5,0 7,4IPE R 160 17,70 162,0 81 5,6 8,5



IPE A 220 22,20 217,0 110 5 7,7IPE 220 26,20 220,0 110 5,9 9,2IPE O 220 29,40 222,0 112 6,6 10,2IPE R 220 31,60 25,0 108 6,7 11,8





IPE A 360 50,2 357,6 170 6,6 11,5IPE 360 57,1 360 170 8,0 12,7IPE O 360 66,0 364 172 9,2 14,7IPE R 360 70,3 366 167 9,9 16,0






IPE 750 x 137 137,0 753 563 11,5 17,0IPE 750 x 147 147,0 753 265 13,2 17,0IPE 750 x 161 161,0 758 266 13,8 19,3IPE 750 x 173 173,0 762 267 14,4 21,6IPE 750 x 185 185,0 766 267 14,9 23,6IPE 750 x 196 196,0 770 268 15,6 25,4IPE 750 x 210 210,0 775 268 16,0 28,0IPE 750 x 222 222,0 778 269 17,0 29,5


mm mm mm mm


IPN 400 92,4 400 155 14,4 21,6IPN 450 115,0 450 170 16,2 24,3

IPN 500 141,0 500 185 18,0 27,0IPN 550 166,0 550 200 19,0 30,0


mm mm mm mm

IPN 160 17,9 160 74 6,3 9,5IPN 180 21,9 180 82 6,9 10,4


Flange slope 14 %.

European Wide Flange Beams HEHE A, HE B, HE C, and HE M shapes in accordance with Euronorm 63,62.


mm mm mm mm


mm mm mm mm

HE 340 AA 78,9 320 300 8,5 11,5HE 340 A 105 330 300 9,5 16,5DIL 340 128 340 300 9,5 21,5 HE 340 B 134 340 300 12 21,5HE 340 M 238 377 309 21 40

HE 360 AA 83,7 339 300 9 12HE 360 A 112 350 300 10 17,5DIL 360 136 360 300 10 22,5HE 360 B 142 360 300 12,5 22,5HE 360 M 250 395 309 21 40

HE 400 AA 92,4 378 300 9,5 13HE 400 A 125 390 300 11 19DIL 400 148 400 300 11 24HE 400 B 155 400 300 13,5 24HE 400 M 256 432 307 21 40

HE 450 AA 99,7 425 300 10 12,5HE 450 A 140 440 300 11,5 21DIL 450 163 450 300 11,5 26HE 450 B 171 450 300 14 26HE 450 M 263 478 307 21 40

HE 500 AA 107 472 300 10,5 14HE 500 A 155 490 300 12 23DIL 500 179 500 300 12 28HE 500 B 187 500 300 14,5 28HE 500 M 270 524 306 21 40

HE 550 AA 120 522 300 11,5 15HE 550 A 166 540 300 12,5 24DIL 550 190 550 300 12,5 29HE 500 B 199 550 300 15 29HE 500 M 278 572 306 21 40

HE 600 AA 129 571 300 12 15,5HE 600 A 178 590 300 13 25DIL 600 201 600 300 13 30HE 600 B 212 600 300 15,5 30HE 600 M 285 620 305 21 40

HE 650 AA 138 62 0300 12,5 16HE 650 A 190 640 300 13,5 26DIL 650 B 225 650 300 16 31HE 650 M 293 668 305 21 40

HE 700 AA 150 670 300 13 17HE 700 A 204 690 300 14,5 27DIL 700 B 241 700 300 17 32HE 700 M 301 716 304 21 40

HE 800 AA 172 770 300 14 18HE 800 A 224 790 300 15 28DIL 800 B 262 800 300 17,5 33HE 800 M 317 814 303 21 40

HE 900 AA 198 870 300 15 20HE 900 A 252 890 300 16 30DIL 900 B 291 900 300 18,5 35HE 900 M 333 910 302 21 40

HE 1000 AA 222 970 300 16 21HE 1000 A 990 300 16,5 31DIL 1000 B 314 1000 300 19 36HE 1000 M 349 1008 302 21 40










HE 280 AA 61,2 264 280 7 10HE 280 A 76,4 270 280 8 13DIL 280 98,3 28 0280 8 18HE 280 B 103 280 280 10,5 18HE 280 M 189 310 288 18,5 33

HE 300 AA 69,8 283 300 7,5 10,5HE 300 A 88,3 290 300 8,5 14DIL 300 112 300 300 8,5 19HE 300 B 117 300 300 11 19HE 300 C 177 320 305 16 29HE 300 M 238 340 310 21 39

HE 320 AA 74,2 301 300 8 11HE 320 A 97,6 310 300 9 15,5DIL 320 121 320 300 9 20,5HE 320 B 127 32 0300 11,5 20,5HE 320 M 245 359 309 21 40


American Wide Flange ShapesM4, W 5-W 36 in accordance with ASTM A 6-83

Metric Imperial Dimensionsdesignation designationh x b x mass h x b x weighth b a e(nominal) (nominal) mm mm mm mm

M 100 x 100 x 19,3 M 4 x 4 x 13 102 100 6,5 9,4x 20,5 x 13,8 102 102 8,0 9,4x 24,2 x 16,3 107 100 7,9 12

W 130 x 130 x 23,8 W 5 x 5 x 16 127 127 6,1 9,1x 28,1 x 19 131 128 6,9 10,9

W 150 x 150 x 22,5 W 6 x 6 x 15 152 152 5,8 6,6x 29,8 x 20 157 153 6,6 9,3x 37,1 x 25 162 154 8,1 11,6

W 200 x 135 x 26,6 W 8 x 5,25 x 18 207 133 5,8 8,4x 31,3 x 21 210 134 6,4 10,2

W 200 x 165 x 35,9 W 8 x 6,5 x 24 201 165 6,2 10,2x 41,7 x 28 205 166 7,2 11,8

W 200 x 200 x 46,1 W 8 x 8 x 31 203 203 7,2 11x 52 x 35 206 204 7,9 12,6x 59 x 40 210 205 9,1 14,2x 71 x 48 216 206 10,2 17,4x 86 x 58 222 209 13 20,6x 100 x 67 229 210 14,5 23,7

W 250 x 145 x 32,7 W 10 x 5,75 x 22 258 146 6,1 9,1x 38,5 x 26 262 147 6,6 11,2x 44,8 x 30 266 148 7,6 13

W 250 x 200 x 49,1 W 10 x 8 x 33 247 202 7,4 11x 58 x 39 252 203 8 13,5x 67 x 45 257 204 8,9 15,7

W 250 X 250 x 73 W 10 x 10 x 49 253 254 8,6 14,2x 80 x 54 256 255 9,4 15,6x 89 x 60 260 256 10,7 17,3x 101 x 68 264 257 11,9 9,6x 115 x 77 269 259 13,5 22,1x 131 x 88 275 261 15,4 25,1x 149 x 100 282 263 17,3 28,4x 167 x 112 289 265 19,2 31,8

W 310 x 165 x 38,7 W 12 x 6,5 x 26 310 165 5,8 9,7x 44,5 x 30 313 166 6,6 11,2x 52 x 35 317 167 736 13,2

W 310 x 250 x 79 W 12 x 10 x 53 306 254 8,8 14,6x 86 x 58 310 254 9,1 16,3

W 310 x 310 x 97 W 12 x 12 x 65 308 305 8,9 15,4x 107 x 72 311 306 10,9 17,0x 117 x 79 314 307 1,9 18,7x 129 x 87 318 308 13,1 20,6x 143 x 96 353 309 14,0 22,9x 158 x 106 327 310 15,5 25,1x 179 x 120 333 313 18,0 28,1x 202 x 136 341 315 20,1 31,7x 226 x 152 348 317 22,1 35,6x 253 x 170 356 319 24,4 39,6x 283 x 190 365 322 26,9 44,1x 313 x 210 374 325 30,0 48,3x 342 x 230 382 328 32,6 52,6x 375 x 252 391 330 35,4 57,2x 415 x 279 403 334 38,9 62,7x 454 x 305 415 336 41,3 68,7x 500 x 336 427 340 45,1 751

W 360 x 170 x 44,8 W 14 x 6,75 x 30 352 171 6,9 9,8x 51 x 34 355 171 7,2 11,6x 57 x 38 358 172 7,9 13,1

W 360 x 250 x 91 W 14 x 10 x 61 353 254 9,5 16,4x 101 x 65 357 255 10,5 18,3x 110 x 74 360 256 11,4 19,9x 122 x 82 363 257 13,0 21,7

Metric Imperial Dimensionsdesignation designationh x b x mass h x b x weighth b a e(nominal) (nominal) mm mm mmmm

W 360 x 370 x 134 W 14 x 14,5 x 90 356 369 11,2 18,0x 147 x 99 360 370 12,3 19,8x 162 x 109 364 371 13,3 21,8x 179 x 120 368 373 15,0 23,9x 196 x 132 372 374 16,4 26,2

W 360 x 410 x 216 W 14 x 16 x 145 375 394 17,3 27,7x 237 x 159 380 395 18,9 30,2x 262 x 176 387 398 21,1 33,3x 287 x 193 393 399 22,3 36,6x 314 x 211 399 401 24,9 39,6x 347 x 233 407 404 27,2 43,7x 382 x 257 416 406 29,8 48,0x 421 x 283 425 409 32,8 52,6x 463 x 311 435 412 35,8 57,4x 509 x 342 446 416 39,1 62,7x 551 x 370 455 418 42,0 67,6x 592 x 398 465 421 45,0 72,3x 634 x 426 474 424 47,6 77,1x 677 x 455 483 428 51,2 81,5x 744 x 500 498 432 55,6 88,9x 818 x 550 514 437 60,5 97,0x 901 x 605 531 442 65,9 106,0x 990 x 665 550 448 71,9 115,0x 1086 x 730 569 454 78,0 125,0

W 410 x 180 x 53 W 16 x 7 x 36 403 177 7,5 10,9x 60 x 40 407 178 7,7 12,8x 67 x 45 410 179 8,8 14,4x 75 x 50 413 180 9,7 16,0x 85 x 57 417 181 10,9 18,2

W 410 x 260 x 100 W 16 x 10,25 x 67 415 260 10,0 16,9x 114 x 77 420 261 11,6 19,3x 132 x 89 425 263 13,3 22,2x 149 x 100 431 265 14,9 25,0

W 460 x 190 x 74 W 18 x 7,5 x 50 457 190 9,0 14,5x 82 x 55 460 191 9,9 16,0x 89 x 60 463 192 10,5 17,7x 97 x 65 466 193 11,4 19,0x 106 x 71 469 194 12,6 20,6

W 460 x 280 x 113 W 18 x 11 x 76 463 280 10,8 17,3x 128 x 86 467 282 12,2 19,6x 144 x 97 472 283 13,6 22,1x 158 x 106 476 284 15,0 23,9x 177 x 119 482 286 16,6 26,9

W 530 x 165 x 66 W 21 x 6,5 x 44 525 165 8,9 11,4x 74 x 50 529 166 9,7 13,6x 85 x 57 535 166 10,3 16,5

W 530 x 210 x 92 W 21 x 8,25 x 62 533 209 10,2 15,6x 101 x 68 537 210 10,9 17,4x 109 x 73 539 211 11,6 18,8x 123 x 83 544 515 13,1 21,2x 138 x 93 549 215 14,7 23,6

W 530 x 315 x 150 W 21 x 12,25 x 101 543 312 12,7 20,3x 165 x 111 546 313 14,0 222x 182 x 122 551 315 12,5 24,4x 196 x 132 554 316 16,5 26,3x 219 x 147 560 318 18,3 29,2

W 610 x 180 x 82 W24 x 7 x 55 599 178 10,0 12,8x 92 x 62 603 179 10,9 15,0

W 610 x 230 x 101 W 24 x 7 x 68 603 228 10,5 14,9x 113 x 76 608 228 11,2 17,3x 125 x 84 612 229 11,9 19,6x 140 x 94 617 230 13,1 22,2

Equal Angles / Unequal Angles

Unequal Angles

Size ThicknessA t kg/m

20 x 20 x 2 0,6020 x 20 x 2,5 0,7420 x 20 x 3 0,8820 x 20 x 4 1,14

25 x 25 x 2 0,7625 x 25 x 2,5 0,9425 x 25 x 3 1,1225 x 25 x 4 1,4525 x 25 x 4,5 1,6225 x 25 x 5 1,7725 x 25 x 6 2,08

30 x 30 x 2 0,9330 x 30 x 2,5 1,1530 x 30 x 3 1,3730 x 30 x 4 1,7830 x 30 x 5 2,1830 x 30 x 6 2,57

35 x 35 x 2,5 1,3435 x 35 x 3 1,6035 x 35 x 3,5 1,8735 x 35 x 4 2,1035 x 35 x 4,5 2,3335 x 35 x 5 2,5735 x 35 x 6 3,04

38 x 38 x 2,5 1,4938 x 38 x 3 1,7538 x 38 x 4 2,2838 x 38 x 5 2,8238 x 38 x 6 3,33

40 x 40 x 3 1,8440 x 40 x 3,5 2,1540 x 40 x 4 2,4240 x 40 x 5 2,9740 x 40 x 6 3,5240 x 40 x 7 4,0440 x 40 x 8 4,55

45 x 45 x 3 2,09 45 x 45 x 4 2,7445 x 45 x 4,5 3,0645 x 45 x 5 3,3845 x 45 x 6 4,0045 x 45 x 7 4,5245 x 45 x 8 5,19

50 x 50 x 3 2,3650 x 50 x 4 3,0750 x 50 x 4,5 3,4150 x 50 x 5 3,7750 x 50 x 6 4,4750 x 50 x 7 5,1550 x 50 x 8 58250 x 50 x 9 6,4750 x 50 x 10 7,06

55 x 55 x 4 3,3755 x 55 x 5 4,1855 x 55 x 5,5 4,5755 x 55 x 6 4,9555 x 55 x 8 6,4655 x 55 x 10 7,90

60 x 60 x 4 3,7060 x 60 x 5 4,5760 x 60 x 6 5,4260 x 60 x 7 6,2560 x 60 x 8 7,0960 x 60 x 10 8,69

65 x 65 x 5 4,95 65 x 65 x 6 5,9165 x 65 x 7 6,8365 x 65 x 8 7,7265 x 65 x 9 8,6265 x 65 x 10 9,4965 x 65 x 11 10,34


70 x 70 x 5 5,3770 x 70 x 6 6,3870 x 70 x 7 7,3870 x 70 x 9 9,3770 x 70 x 11 11,23

75 x 75 x 5 5,7675 x 75 x 6 6,8675 x 75 x 7 7,9475 x 75 x 8 9,0375 x 75 x 10 11,0775 x 75 x 12 13,10

80 x 80 x 6 7,3080 x 80 x 8 9,6680 x 80 x 9 10,8080 x 80 x 10 11,9080 x 80 x 12 14,0580 x 80 x 14 16,10

90 x 90 x 6 8,2590 x 90 x 8 10,9090 x 90 x 9 12,1790 x 90 x 10 13,4590 x 90 x 11 14,6890 x 90 x 12 15,9390 x 90 x 13 17,1190 x 90 x 16 20,76

100 x 100 x 6 9,30100 x 100 x 8 12,18100 x 100 x 10 15,07100 x 100 x 12 17,82100 x 100 x 14 20,57100 x 100 x 15 21,90100 x 100 x 16 23,30

110 x 110 x 8 13,40110 x 110 x 10 16,60110 x 110 x 12 19,70110 x 110 x 14 22,80110 x 110 x 16 25,80

120 x 120 x 8 14,70120 x 120 x 10 18,20120 x 120 x 11 20,81120 x 120 x 12 21,60120 x 120 x 13 23,30120 x 120 x 15 26,60120 x 120 x 18 31,60

130 x 130 x 8 15,90130 x 130 x 10 19,70130 x 130 x 12 23,60130 x 130 x 14 27,20130 x 130 x 16 30,90130 x 130 x 19 36,20

140 x 140 x 13 27,50140 x 140 x 15 31,40140 x 140 x 16 33,40140 x 140 x 17 35,30140 x 140 x 19 39,10140 x 140 x 20 41,00

150 x 150 x 10 23,00150 x 150 x 12 27,30150 x 150 x 14 31,60150 x 150 x 15 33,80150 x 150 x 16 35,90150 x 150 x 18 40,10150 x 150 x 20 44,60

160 x 160 x 15 36,20160 x 160 x 17 40,70160 x 160 x 19 45,10

180 x 180 x 15 40,90180 x 180 x 16 43,50180 x 180 x 18 48,60180 x 180 x 20 53,70


200 x 200 x 15 45,60200 x 200 x 16 48,50200 x 200 x 18 54,20200 x 200 x 20 59,90200 x 200 x 22 65,60


30 x 20 x 3 1,1230 x 20 x 4 1,4630 x 20 x 5 1,77

40 x 20 x 3 1,3540 x 20 x 4 1,7740 x 20 x 5 2,1740 x 20 x 6 2,56

45 x 30 x 3 1,7145 x 30 x 4 2,2545 x 30 x 5 2,77

50 x 40 x 3 2,0650 x 40 x 4 2,7250 x 40 x 5 3,3550 x 40 x 6 3,98

60 x 30 x 3 2,0660 x 30 x 5 3,3760 x 30 x 6 3,9860 x 30 x 7 4,59

60 x 40 x 3 2,3360 x 40 x 4 3,0560 x 40 x 5 3,7660 x 40 x 6 4,4660 x 40 x 7 5,14

65 x 50 x 5 4,3565 x 50 x 6 5,1665 x 50 x 7 5,9665 x 50 x 8 6,7665 x 50 x 9 7,52

75 x 50 x 5 4,7475 x 50 x 6 5,6475 x 50 x 6,5 6,1075 x 50 x 7 6,5475 x 50 x 8 7,4075 x 50 x 9 8,2475 x 50 x 10 8,97

75 x 55 x 5 4,8575 x 55 x 7 6,8075 x 55 x 9 8,59

75 x 65 x 6 6,3775 x 65 x 8 8,3475 x 65 x 10 10,30

80 x 40 x 6 5,4080 x 40 x 7 6,2080 x 40 x 8 7,08

80 x 60 x 6 6,3780 x 60 x 7 7,3680 x 60 x 8 8,34

90 x 65 x 6 7,0990 x 65 x 8 9,3090 x 65 x 10 11,45

90 x 75 x 6,5 8,1490 x 75 x 7 8,7490 x 75 x 9 11,1090 x 75 x 12,5 15,25


100 x 50 x 6 6,85100 x 50 x 8 8,99100 x 50 x 10 11,10100 x 50 x 12 13,10

100 x 65 x 6,5 8,17100 x 65 x 7 8,77100 x 65 x 8 9,94100 x 65 x 9 11,10100 x 65 x 10 12,30100 x 65 x 11 13,40

100 x 75 x 6,5 8,17100 x 75 x 7 9,30100 x 75 x 8 10,60100 x 75 x 9 11,80100 x 75 x 10 13,00100 x 75 x 11 14,30100 x 75 x 12 15,40

120 x 80 x 8 12,20120 x 80 x 10 15,00120 x 80 x 12 17,80120 x 80 x 14 20,50

125 x 75 x 6,5 9,98125 x 75 x 8 12,20125 x 75 x 10 15,00125 x 75 x 12 17,80

130 x 65 x 8 11,80130 x 65 x 10 14,60130 x 65 x 12 17,30

137 x 105 x 6,4 11,70137 x 105 x 7,9 14,50137 x 105 x 9,5 17,30

150 x 75 x 9 15,30150 x 75 x 10 17,00150 x 75 x 11 18,60150 x 75 x 12 20,20150 x 75 x 13 21,70150 x 75 x 15 24,80

150 x 90 x 9 16,70150 x 90 x 10 18,20150 x 90 x 12 21,60150 x 90 x 15 26,60150 x 90 x 18 31,70

150 x 100 x 10 19,00150 x 100 x 12 22,60150 x 100 x 14 26,10150 x 100 x 15 27,80

160 x 80 x 10 18,20160 x 80 x 12 21,60160 x 80 x 14 25,00

200 x 100 x 10 23,00200 x 100 x 12 27,30200 x 100 x 14 31,60200 x 100 x 15 33,70200 x 100 x 16 35,90

200 x 150 x 12 32,00200 x 150 x 15 39,60200 x 150 x 18 47,10


250 x 250 x 25 93,60250 x 250 x 28 104,00250 x 250 x 32 118,00250 x 250 x 35 128,00




M 100 x 100 x 19,3 M 4 x 4 x 13 102 100 6,5 9,4x 20,5 x 13,8 102 102 8,0 9,4x 24,2 x 16,3 107 100 7,9 12

W 130 x 130 x 23,8 W 5 x 5 x 16 127 127 6,1 9,1x 28,1 x 19 131 128 6,9 10,9

W 150 x 150 x 22,5 W 6 x 6 x 15 152 152 5,8 6,6x 29,8 x 20 157 153 6,6 9,3x 37,1 x 25 162 154 8,1 11,6

W 200 x 135 x 26,6 W 8 x 5,25 x 18 207 133 5,8 8,4x 31,3 x 21 210 134 6,4 10,2

W 200 x 165 x 35,9 W 8 x 6,5 x 24 201 165 6,2 10,2x 41,7 x 28 205 166 7,2 11,8

W 200 x 200 x 46,1 W 8 x 8 x 31 203 203 7,2 11x 52 x 35 206 204 7,9 12,6x 59 x 40 210 205 9,1 14,2x 71 x 48 216 206 10,2 17,4x 86 x 58 222 209 13 20,6x 100 x 67 229 210 14,5 23,7

W 250 x 145 x 32,7 W 10 x 5,75 x 22 258 146 6,1 9,1x 38,5 x 26 262 147 6,6 11,2x 44,8 x 30 266 148 7,6 13

W 250 x 200 x 49,1 W 10 x 8 x 33 247 202 7,4 11x 58 x 39 252 203 8 13,5x 67 x 45 257 204 8,9 15,7

W 250 X 250 x 73 W 10 x 10 x 49 253 254 8,6 14,2x 80 x 54 256 255 9,4 15,6x 89 x 60 260 256 10,7 17,3x 101 x 68 264 257 11,9 9,6x 115 x 77 269 259 13,5 22,1x 131 x 88 275 261 15,4 25,1x 149 x 100 282 263 17,3 28,4x 167 x 112 289 265 19,2 31,8

W 310 x 165 x 38,7 W 12 x 6,5 x 26 310 165 5,8 9,7x 44,5 x 30 313 166 6,6 11,2x 52 x 35 317 167 736 13,2

W 310 x 250 x 79 W 12 x 10 x 53 306 254 8,8 14,6x 86 x 58 310 254 9,1 16,3

W 310 x 310 x 97 W 12 x 12 x 65 308 305 8,9 15,4x 107 x 72 311 306 10,9 17,0x 117 x 79 314 307 1,9 18,7x 129 x 87 318 308 13,1 20,6x 143 x 96 353 309 14,0 22,9x 158 x 106 327 310 15,5 25,1x 179 x 120 333 313 18,0 28,1x 202 x 136 341 315 20,1 31,7x 226 x 152 348 317 22,1 35,6x 253 x 170 356 319 24,4 39,6x 283 x 190 365 322 26,9 44,1x 313 x 210 374 325 30,0 48,3x 342 x 230 382 328 32,6 52,6x 375 x 252 391 330 35,4 57,2x 415 x 279 403 334 38,9 62,7x 454 x 305 415 336 41,3 68,7x 500 x 336 427 340 45,1 751

W 360 x 170 x 44,8 W 14 x 6,75 x 30 352 171 6,9 9,8x 51 x 34 355 171 7,2 11,6x 57 x 38 358 172 7,9 13,1

W 360 x 250 x 91 W 14 x 10 x 61 353 254 9,5 16,4x 101 x 65 357 255 10,5 18,3x 110 x 74 360 256 11,4 19,9x 122 x 82 363 257 13,0 21,7


W 360 x 370 x 134 W 14 x 14,5 x 90 356 369 11,2 18,0x 147 x 99 360 370 12,3 19,8x 162 x 109 364 371 13,3 21,8x 179 x 120 368 373 15,0 23,9x 196 x 132 372 374 16,4 26,2

W 360 x 410 x 216 W 14 x 16 x 145 375 394 17,3 27,7x 237 x 159 380 395 18,9 30,2x 262 x 176 387 398 21,1 33,3x 287 x 193 393 399 22,3 36,6x 314 x 211 399 401 24,9 39,6x 347 x 233 407 404 27,2 43,7x 382 x 257 416 406 29,8 48,0x 421 x 283 425 409 32,8 52,6x 463 x 311 435 412 35,8 57,4x 509 x 342 446 416 39,1 62,7x 551 x 370 455 418 42,0 67,6x 592 x 398 465 421 45,0 72,3x 634 x 426 474 424 47,6 77,1x 677 x 455 483 428 51,2 81,5x 744 x 500 498 432 55,6 88,9x 818 x 550 514 437 60,5 97,0x 901 x 605 531 442 65,9 106,0x 990 x 665 550 448 71,9 115,0x 1086 x 730 569 454 78,0 125,0

W 410 x 180 x 53 W 16 x 7 x 36 403 177 7,5 10,9x 60 x 40 407 178 7,7 12,8x 67 x 45 410 179 8,8 14,4x 75 x 50 413 180 9,7 16,0x 85 x 57 417 181 10,9 18,2

W 410 x 260 x 100 W 16 x 10,25 x 67 415 260 10,0 16,9x 114 x 77 420 261 11,6 19,3x 132 x 89 425 263 13,3 22,2x 149 x 100 431 265 14,9 25,0

W 460 x 190 x 74 W 18 x 7,5 x 50 457 190 9,0 14,5x 82 x 55 460 191 9,9 16,0x 89 x 60 463 192 10,5 17,7x 97 x 65 466 193 11,4 19,0x 106 x 71 469 194 12,6 20,6

W 460 x 280 x 113 W 18 x 11 x 76 463 280 10,8 17,3x 128 x 86 467 282 12,2 19,6x 144 x 97 472 283 13,6 22,1x 158 x 106 476 284 15,0 23,9x 177 x 119 482 286 16,6 26,9

W 530 x 165 x 66 W 21 x 6,5 x 44 525 165 8,9 11,4x 74 x 50 529 166 9,7 13,6x 85 x 57 535 166 10,3 16,5

W 530 x 210 x 92 W 21 x 8,25 x 62 533 209 10,2 15,6x 101 x 68 537 210 10,9 17,4x 109 x 73 539 211 11,6 18,8x 123 x 83 544 515 13,1 21,2x 138 x 93 549 215 14,7 23,6

W 530 x 315 x 150 W 21 x 12,25 x 101 543 312 12,7 20,3x 165 x 111 546 313 14,0 222x 182 x 122 551 315 12,5 24,4x 196 x 132 554 316 16,5 26,3x 219 x 147 560 318 18,3 29,2

W 610 x 180 x 82 W24 x 7 x 55 599 178 10,0 12,8x 92 x 62 603 179 10,9 15,0

W 610 x 230 x 101 W 24 x 7 x 68 603 228 10,5 14,9x 113 x 76 608 228 11,2 17,3x 125 x 84 612 229 11,9 19,6x 140 x 94 617 230 13,1 22,2

Equal Angles / Unequal Angles

Unequal Angles


20 x 20 x 2 0,6020 x 20 x 2,5 0,7420 x 20 x 3 0,8820 x 20 x 4 1,14

25 x 25 x 2 0,7625 x 25 x 2,5 0,9425 x 25 x 3 1,1225 x 25 x 4 1,4525 x 25 x 4,5 1,6225 x 25 x 5 1,7725 x 25 x 6 2,08

30 x 30 x 2 0,9330 x 30 x 2,5 1,1530 x 30 x 3 1,3730 x 30 x 4 1,7830 x 30 x 5 2,1830 x 30 x 6 2,57

35 x 35 x 2,5 1,3435 x 35 x 3 1,6035 x 35 x 3,5 1,8735 x 35 x 4 2,1035 x 35 x 4,5 2,3335 x 35 x 5 2,5735 x 35 x 6 3,04

38 x 38 x 2,5 1,4938 x 38 x 3 1,7538 x 38 x 4 2,2838 x 38 x 5 2,8238 x 38 x 6 3,33

40 x 40 x 3 1,8440 x 40 x 3,5 2,1540 x 40 x 4 2,4240 x 40 x 5 2,9740 x 40 x 6 3,5240 x 40 x 7 4,0440 x 40 x 8 4,55

45 x 45 x 3 2,09 45 x 45 x 4 2,7445 x 45 x 4,5 3,0645 x 45 x 5 3,3845 x 45 x 6 4,0045 x 45 x 7 4,5245 x 45 x 8 5,19

50 x 50 x 3 2,3650 x 50 x 4 3,0750 x 50 x 4,5 3,4150 x 50 x 5 3,7750 x 50 x 6 4,4750 x 50 x 7 5,1550 x 50 x 8 58250 x 50 x 9 6,4750 x 50 x 10 7,06

55 x 55 x 4 3,3755 x 55 x 5 4,1855 x 55 x 5,5 4,5755 x 55 x 6 4,9555 x 55 x 8 6,4655 x 55 x 10 7,90

60 x 60 x 4 3,7060 x 60 x 5 4,5760 x 60 x 6 5,4260 x 60 x 7 6,2560 x 60 x 8 7,0960 x 60 x 10 8,69

65 x 65 x 5 4,95 65 x 65 x 6 5,9165 x 65 x 7 6,8365 x 65 x 8 7,7265 x 65 x 9 8,6265 x 65 x 10 9,4965 x 65 x 11 10,34


70 x 70 x 5 5,3770 x 70 x 6 6,3870 x 70 x 7 7,3870 x 70 x 9 9,3770 x 70 x 11 11,23

75 x 75 x 5 5,7675 x 75 x 6 6,8675 x 75 x 7 7,9475 x 75 x 8 9,0375 x 75 x 10 11,0775 x 75 x 12 13,10

80 x 80 x 6 7,3080 x 80 x 8 9,6680 x 80 x 9 10,8080 x 80 x 10 11,9080 x 80 x 12 14,0580 x 80 x 14 16,10

90 x 90 x 6 8,2590 x 90 x 8 10,9090 x 90 x 9 12,1790 x 90 x 10 13,4590 x 90 x 11 14,6890 x 90 x 12 15,9390 x 90 x 13 17,1190 x 90 x 16 20,76

100 x 100 x 6 9,30100 x 100 x 8 12,18100 x 100 x 10 15,07100 x 100 x 12 17,82100 x 100 x 14 20,57100 x 100 x 15 21,90100 x 100 x 16 23,30

110 x 110 x 8 13,40110 x 110 x 10 16,60110 x 110 x 12 19,70110 x 110 x 14 22,80110 x 110 x 16 25,80

120 x 120 x 8 14,70120 x 120 x 10 18,20120 x 120 x 11 20,81120 x 120 x 12 21,60120 x 120 x 13 23,30120 x 120 x 15 26,60120 x 120 x 18 31,60

130 x 130 x 8 15,90130 x 130 x 10 19,70130 x 130 x 12 23,60130 x 130 x 14 27,20130 x 130 x 16 30,90130 x 130 x 19 36,20

140 x 140 x 13 27,50140 x 140 x 15 31,40140 x 140 x 16 33,40140 x 140 x 17 35,30140 x 140 x 19 39,10140 x 140 x 20 41,00

150 x 150 x 10 23,00150 x 150 x 12 27,30150 x 150 x 14 31,60150 x 150 x 15 33,80150 x 150 x 16 35,90150 x 150 x 18 40,10150 x 150 x 20 44,60

160 x 160 x 15 36,20160 x 160 x 17 40,70160 x 160 x 19 45,10

180 x 180 x 15 40,90180 x 180 x 16 43,50180 x 180 x 18 48,60180 x 180 x 20 53,70


200 x 200 x 15 45,60200 x 200 x 16 48,50200 x 200 x 18 54,20200 x 200 x 20 59,90200 x 200 x 22 65,60


30 x 20 x 3 1,1230 x 20 x 4 1,4630 x 20 x 5 1,77

40 x 20 x 3 1,3540 x 20 x 4 1,7740 x 20 x 5 2,1740 x 20 x 6 2,56

45 x 30 x 3 1,7145 x 30 x 4 2,2545 x 30 x 5 2,77

50 x 40 x 3 2,0650 x 40 x 4 2,7250 x 40 x 5 3,3550 x 40 x 6 3,98

60 x 30 x 3 2,0660 x 30 x 5 3,3760 x 30 x 6 3,9860 x 30 x 7 4,59

60 x 40 x 3 2,3360 x 40 x 4 3,0560 x 40 x 5 3,7660 x 40 x 6 4,4660 x 40 x 7 5,14

65 x 50 x 5 4,3565 x 50 x 6 5,1665 x 50 x 7 5,9665 x 50 x 8 6,7665 x 50 x 9 7,52

75 x 50 x 5 4,7475 x 50 x 6 5,6475 x 50 x 6,5 6,1075 x 50 x 7 6,5475 x 50 x 8 7,4075 x 50 x 9 8,2475 x 50 x 10 8,97

75 x 55 x 5 4,8575 x 55 x 7 6,8075 x 55 x 9 8,59

75 x 65 x 6 6,3775 x 65 x 8 8,3475 x 65 x 10 10,30

80 x 40 x 6 5,4080 x 40 x 7 6,2080 x 40 x 8 7,08

80 x 60 x 6 6,3780 x 60 x 7 7,3680 x 60 x 8 8,34

90 x 65 x 6 7,0990 x 65 x 8 9,3090 x 65 x 10 11,45

90 x 75 x 6,5 8,1490 x 75 x 7 8,7490 x 75 x 9 11,1090 x 75 x 12,5 15,25


100 x 50 x 6 6,85100 x 50 x 8 8,99100 x 50 x 10 11,10100 x 50 x 12 13,10

100 x 65 x 6,5 8,17100 x 65 x 7 8,77100 x 65 x 8 9,94100 x 65 x 9 11,10100 x 65 x 10 12,30100 x 65 x 11 13,40

100 x 75 x 6,5 8,17100 x 75 x 7 9,30100 x 75 x 8 10,60100 x 75 x 9 11,80100 x 75 x 10 13,00100 x 75 x 11 14,30100 x 75 x 12 15,40

120 x 80 x 8 12,20120 x 80 x 10 15,00120 x 80 x 12 17,80120 x 80 x 14 20,50

125 x 75 x 6,5 9,98125 x 75 x 8 12,20125 x 75 x 10 15,00125 x 75 x 12 17,80

130 x 65 x 8 11,80130 x 65 x 10 14,60130 x 65 x 12 17,30

137 x 105 x 6,4 11,70137 x 105 x 7,9 14,50137 x 105 x 9,5 17,30

150 x 75 x 9 15,30150 x 75 x 10 17,00150 x 75 x 11 18,60150 x 75 x 12 20,20150 x 75 x 13 21,70150 x 75 x 15 24,80

150 x 90 x 9 16,70150 x 90 x 10 18,20150 x 90 x 12 21,60150 x 90 x 15 26,60150 x 90 x 18 31,70

150 x 100 x 10 19,00150 x 100 x 12 22,60150 x 100 x 14 26,10150 x 100 x 15 27,80

160 x 80 x 10 18,20160 x 80 x 12 21,60160 x 80 x 14 25,00

200 x 100 x 10 23,00200 x 100 x 12 27,30200 x 100 x 14 31,60200 x 100 x 15 33,70200 x 100 x 16 35,90

200 x 150 x 12 32,00200 x 150 x 15 39,60200 x 150 x 18 47,10


250 x 250 x 25 93,60250 x 250 x 28 104,00250 x 250 x 32 118,00250 x 250 x 35 128,00


American Standard „C“ ShapesM4, W 5-W 36 in accordance with ASTM A 6-83

ChannelsTo BS 4: Part 1: 1980

Metric Imperial Dimensionsdesignation designationh x b x mass h x b x weight h b a e(nominal) (nominal) mm mm mm mm

C 150 x 51 x 12,2 C 6 x 2 x 8,20 152,4 48,8 5,1 8,7x 15,6 x 10,50 152,4 51,7 8,0 8,7x 19,3 x 13,00 152,4 54,8 11,1 8,7

C 180 x 54 x 14,6 C 7 x 2 1/8 x 9,80 177,8 53,1 5,3 9,3x 18,2 x 12,25 177,8 55,7 8,0 9,3x 22,0 x 14,75 1778 58,4 10,6 9,3

C 200 x 57 x 17,1 C 8 x 2 1/4 x 11,50 203,2 57,4 5,6 9,9x 20,5 x 13,75 203,2 59,5 7,7 9,9x 27,9 x 18,75 203,2 64,3 12,4 9,9

C 230 x 64 x 19,9 C 9 x 2 1/2 x 13,40 228,6 61,7 5,8 10,5x 22,0 x 15,00 228,6 63,1 7,2 10,5x 30,0 x 20,00 228,6 67,3 11,4 10,5

C 250 x 67 x 22,8 C 10 x 2 5/8 x 15,80 254,0 66,0 6,1 11,1x 30,0 x 20,00 254,0 69,5 9,6 11,1x 37,0 x 25,00 254,0 73,3 13,4 11,1x 45,0 x 30,00 254,0 77,0 17,1 11,1

C 310 x 76 x 30,8 C 12 x 3 x 20,70 304,8 74,4 7,1 12,7x 37,0 x 25,00 304,8 77,4 9,8 12,7x 45,0 x 30,00 304,8 80,5 12,9 12,7

C 380 x 86 x 50,4 C 15x 3 3/8 x 33,90 381,0 86,4 10,2 16,5x 60,0 x 40,00 381,0 89,4 13,2 16,5x 74,0 x 50,00 381,0 94,4 18,2 16,5

Imperial dimensions

Serial Size Mass Area Thickness D x B per metre of section Web Flangein lb/ft in t in T in

17 x 4 44 12,94 0,48 0,66315 x 4 37 10,88 0,41 0,64312 x 4 31 9,12 0,40 0,584

12 x 3 1/2 28 8,23 0,40 0,53810 x 3 1/2 24 7,06 0,36 0,53510 x 3 19 5,58 0,32 0,431

9 x 3 1/2 22 6,47 0,34 0,5359 x 3 17,5 5,15 0,30 0,4398 x 3 1/2 20 5,88 0,32 0,5078 x 3 16 4,70 0,28 0,439

7 x 3 1/2 18 5,29 0,30 0,4847 x 3 14 4,11 0,32 0,4056 x 3 1/2 16 4,71 0,28 0,4556 x 3 12 3,53 0,25 0,355

5 x 2 1/2 10 2,94 0,26 0,3634 x 2 7 2,06 0,28 0,3003 x 2 6,24 1,84 0,25 0,3003 x 1 1/2 4,50 1,32 0,20 0,267

2 1/2 x 1 4,13 1,22 0,31 0,290

2 x 1 1/2 3,90 1,15 0,25 0,250

Metric dimensions

Serial Size Mass Area Thickness D x B per metre of section Web Flangemm kg cm t mm T mm in

432 x 102 65,54 83,49 12,2 16,8381 x 102 55,10 70,19 10,4 16,3305 x 102 46,18 58,83 10,2 14,8

305 x 89 41,69 53,11 10,2 13,7254 x 89 35,74 45,52 9,1 13,6254 x 76 28,29 36,03 8,1 10,9

229 x 89 32,76 41,73 8,6 13,3229 x 76 26,06 33,20 7,6 11,2203 x 89 29,78 37,94 8,1 12,9203 x 89 23,82 30,34 7,1 11,2

178 x 89 26,81 34,15 7,3 12,3178 x 76 20,84 26,54 6,6 10,3152 x 89 23,84 30,36 7,1 11,6152 x 76 17,88 22,77 6,4 9,0

127 x 64 14,90 18,98 6,4 9,2102 x 51 10,42 13,28 6,1 7,676 x 51 9,34 11,89 6,4 7,676 x 38 6,70 8,53 5,1 6,8

63,5 x 25,4 6,12 7,85 7,9 7,9

51 x 48 5,81 7,43 6,4 6,4


European Small Channels / European Standard ChannelsU 30-65 shapes in accordance with Euronorm 54-80 U

European Standard Channels UPN


W 610 x 325 x 155 W 24 x 12,75 x 104 611 324 12,7 19,0x 174 x 117 616 325 14,0 21,6x 195 x 131 622 327 15,4 24,4x 217 x 146 628 328 16,5 27,7x 241 x 162 635 329 17,9 31,0

W 690 x 250 x 125 W 27 x 10 x 84 678 253 11,7 16,3x 140 x 94 684 254 12,4 18,9x 152 x 102 688 254 13,1 21,1x 170 x 114 693 256 14,5 23,6

W 690 x 360 x 217 W 27 x 14 x 146 695 355 1534 24,8x 240 x 161 701 356 16,8 27,4x 265 x 178 706 358 18,4 30,2

W 760 x 265 x 147 W 30 x 10,5 x 99 725 265 13,2 17,0x 161 x 108 758 266 13,8 19,3x 172 x 116 762 267 14,4 21,6x 185 x 124 766 267 14,9 23,6x 196 x 132 770 268 15,6 25,4

W 760 x 380 x 257 W 30 x 15 x 173 773 381 16,6 27,1x 284 x 191 779 382 18,0 30,1x 314 x 211 786 384 19,7 33,4

W 840 x 295 x 176 W 33 x 11,5 x 118 835 292 14,0 18,8x 193 x 130 840 292 14,7 21,7x 210 x 141 846 293 15,4 24,4x 226 x 152 851 294 16,1 26,8

W 840 x 405 x 299 W 33 x 15,75 x 201 855 400 18,2 29,2x 329 x 221 862 40 19,7 32,4x 359 x 241 868 403 21,1 35,6


W 920 x 310 x 201 W 36 x 12 x 135 903 304 15,2 20,1x 223 x 150 911 304 15,9 23,9x 238 x 160 915 305 16,5 25,9x 253 x 170 919 306 17,3 27,9x 271 x 182 923 307 18,4 30,0x 289 x 194 927 308 19,4 32,0x 313 x 210 932 309 21,1 34,5

W 920 x 420 x 342 W 25 x 16,5 x 230 912 418 19,3 32,0x 365 x 245 916 419 20,3 34,3x 387 x 260 921 420 21,3 36,6x 417 x 280 927 422 22,5 39,9x 446 x 300 933 423 24,0 42,7

W 1000 x 300 x 222 W 40 x 12 x 149 970 300 16,0 21,0x 249 x 167 980 300 16,5 26,0x 272 x 783 990 300 16,5 31,0x 314 x 211 1000 300 19,0 36,0x 349 x 235 1008 302 21,0 40,0

W 1000 x 400 x 258 W 40 x 16 x 174 970 400 16,5 21,0x 296 x 199 982 400 16,5 27,0x 321 x 215 990 400 16,4 31,0x 371 x 249 1000 400 19,0 36,0x 412 x 277 1008 402 21,0 40,0

W 1000 x 450 x 286 W 40 x 18 x 192 970 450 18,0 21,0x 328 x 221 982 450 18,0 27,0x 363 x 244 992 450 18,0 32,0x 399 x 268 1000 451 19,0 36,0x 444 x 298 1008 453 21,0 40,0x 488 x 328 1016 455 23,0 44,0

Section Dimensions

kg/m h b a emm mm mm mm

U 30 x 15 1,74 30 15 4,0 4,5U 40 x 20 2,87 40 20 5,0 5,5U 40 x 35 4,87 40 35 5,0 7,0U 40 x 25 3,86 50 25 5,0 6,0U 50 x 38 5,59 50 38 5,0 7,0U 60 x 30 5,07 60 30 6,0 6,0U 65 x 42 7,09 65 42 5,5 7,5U 70 x 40 6,77 70 40 6,0 6,5

Section Dimensions


UPN 80 8,64 80UPN 100 10,60 100 50 6,0 8,5UPN 120 13,40 120 55 7,0 9,0UPN 140 16,00 140 60 7,0 10,0UPN 160 18,80 60 65 7,5 10,5UPN 180 22,00 180 70 8,0 11,0

UPN 200 25,30 200 75 8,5 11,5UPN 220 29,40 220 80 9,0 12,5UPN 240 33,20 240 85 9,2 13,0UPN 260 37,90 260 90 10,0 14,0UPN 280 41,80 280 95 10,0 15,0

UPN 300 46,20 300 100 10,0 16,0UPN 320 59,50 320 100 14,0 17,5UPN 350 60,60 350 100 14,0 16,0UPN 380 63,10 380 102 13,5 16,0

UPN 400 71,80 400 110 14,0 18,0


American Standard „C“ ShapesM4, W 5-W 36 in accordance with ASTM A 6-83

ChannelsTo BS 4: Part 1: 1980

Metric Imperial Dimensionsdesignation designationh x b x mass h x b x weight h b a e(nominal) (nominal) mm mm mm mm

C 150 x 51 x 12,2 C 6 x 2 x 8,20 152,4 48,8 5,1 8,7x 15,6 x 10,50 152,4 51,7 8,0 8,7x 19,3 x 13,00 152,4 54,8 11,1 8,7

C 180 x 54 x 14,6 C 7 x 2 1/8 x 9,80 177,8 53,1 5,3 9,3x 18,2 x 12,25 177,8 55,7 8,0 9,3x 22,0 x 14,75 1778 58,4 10,6 9,3

C 200 x 57 x 17,1 C 8 x 2 1/4 x 11,50 203,2 57,4 5,6 9,9x 20,5 x 13,75 203,2 59,5 7,7 9,9x 27,9 x 18,75 203,2 64,3 12,4 9,9

C 230 x 64 x 19,9 C 9 x 2 1/2 x 13,40 228,6 61,7 5,8 10,5x 22,0 x 15,00 228,6 63,1 7,2 10,5x 30,0 x 20,00 228,6 67,3 11,4 10,5

C 250 x 67 x 22,8 C 10 x 2 5/8 x 15,80 254,0 66,0 6,1 11,1x 30,0 x 20,00 254,0 69,5 9,6 11,1x 37,0 x 25,00 254,0 73,3 13,4 11,1x 45,0 x 30,00 254,0 77,0 17,1 11,1

C 310 x 76 x 30,8 C 12 x 3 x 20,70 304,8 74,4 7,1 12,7x 37,0 x 25,00 304,8 77,4 9,8 12,7x 45,0 x 30,00 304,8 80,5 12,9 12,7

C 380 x 86 x 50,4 C 15x 3 3/8 x 33,90 381,0 86,4 10,2 16,5x 60,0 x 40,00 381,0 89,4 13,2 16,5x 74,0 x 50,00 381,0 94,4 18,2 16,5

Imperial dimensions

Serial Size Mass Area Thickness D x B per metre of section Web Flangein lb/ft in t in T in

17 x 4 44 12,94 0,48 0,66315 x 4 37 10,88 0,41 0,64312 x 4 31 9,12 0,40 0,584

12 x 3 1/2 28 8,23 0,40 0,53810 x 3 1/2 24 7,06 0,36 0,53510 x 3 19 5,58 0,32 0,431

9 x 3 1/2 22 6,47 0,34 0,5359 x 3 17,5 5,15 0,30 0,4398 x 3 1/2 20 5,88 0,32 0,5078 x 3 16 4,70 0,28 0,439

7 x 3 1/2 18 5,29 0,30 0,4847 x 3 14 4,11 0,32 0,4056 x 3 1/2 16 4,71 0,28 0,4556 x 3 12 3,53 0,25 0,355

5 x 2 1/2 10 2,94 0,26 0,3634 x 2 7 2,06 0,28 0,3003 x 2 6,24 1,84 0,25 0,3003 x 1 1/2 4,50 1,32 0,20 0,267

2 1/2 x 1 4,13 1,22 0,31 0,290

2 x 1 1/2 3,90 1,15 0,25 0,250

Metric dimensions

Serial Size Mass Area Thickness D x B per metre of section Web Flangemm kg cm t mm T mm in

432 x 102 65,54 83,49 12,2 16,8381 x 102 55,10 70,19 10,4 16,3305 x 102 46,18 58,83 10,2 14,8

305 x 89 41,69 53,11 10,2 13,7254 x 89 35,74 45,52 9,1 13,6254 x 76 28,29 36,03 8,1 10,9

229 x 89 32,76 41,73 8,6 13,3229 x 76 26,06 33,20 7,6 11,2203 x 89 29,78 37,94 8,1 12,9203 x 89 23,82 30,34 7,1 11,2

178 x 89 26,81 34,15 7,3 12,3178 x 76 20,84 26,54 6,6 10,3152 x 89 23,84 30,36 7,1 11,6152 x 76 17,88 22,77 6,4 9,0

127 x 64 14,90 18,98 6,4 9,2102 x 51 10,42 13,28 6,1 7,676 x 51 9,34 11,89 6,4 7,676 x 38 6,70 8,53 5,1 6,8

63,5 x 25,4 6,12 7,85 7,9 7,9

51 x 48 5,81 7,43 6,4 6,4


European Small Channels / European Standard ChannelsU 30-65 shapes in accordance with Euronorm 54-80 U

European Standard Channels UPN


W 610 x 325 x 155 W 24 x 12,75 x 104 611 324 12,7 19,0x 174 x 117 616 325 14,0 21,6x 195 x 131 622 327 15,4 24,4x 217 x 146 628 328 16,5 27,7x 241 x 162 635 329 17,9 31,0

W 690 x 250 x 125 W 27 x 10 x 84 678 253 11,7 16,3x 140 x 94 684 254 12,4 18,9x 152 x 102 688 254 13,1 21,1x 170 x 114 693 256 14,5 23,6

W 690 x 360 x 217 W 27 x 14 x 146 695 355 1534 24,8x 240 x 161 701 356 16,8 27,4x 265 x 178 706 358 18,4 30,2

W 760 x 265 x 147 W 30 x 10,5 x 99 725 265 13,2 17,0x 161 x 108 758 266 13,8 19,3x 172 x 116 762 267 14,4 21,6x 185 x 124 766 267 14,9 23,6x 196 x 132 770 268 15,6 25,4

W 760 x 380 x 257 W 30 x 15 x 173 773 381 16,6 27,1x 284 x 191 779 382 18,0 30,1x 314 x 211 786 384 19,7 33,4

W 840 x 295 x 176 W 33 x 11,5 x 118 835 292 14,0 18,8x 193 x 130 840 292 14,7 21,7x 210 x 141 846 293 15,4 24,4x 226 x 152 851 294 16,1 26,8

W 840 x 405 x 299 W 33 x 15,75 x 201 855 400 18,2 29,2x 329 x 221 862 40 19,7 32,4x 359 x 241 868 403 21,1 35,6


W 920 x 310 x 201 W 36 x 12 x 135 903 304 15,2 20,1x 223 x 150 911 304 15,9 23,9x 238 x 160 915 305 16,5 25,9x 253 x 170 919 306 17,3 27,9x 271 x 182 923 307 18,4 30,0x 289 x 194 927 308 19,4 32,0x 313 x 210 932 309 21,1 34,5

W 920 x 420 x 342 W 25 x 16,5 x 230 912 418 19,3 32,0x 365 x 245 916 419 20,3 34,3x 387 x 260 921 420 21,3 36,6x 417 x 280 927 422 22,5 39,9x 446 x 300 933 423 24,0 42,7

W 1000 x 300 x 222 W 40 x 12 x 149 970 300 16,0 21,0x 249 x 167 980 300 16,5 26,0x 272 x 783 990 300 16,5 31,0x 314 x 211 1000 300 19,0 36,0x 349 x 235 1008 302 21,0 40,0

W 1000 x 400 x 258 W 40 x 16 x 174 970 400 16,5 21,0x 296 x 199 982 400 16,5 27,0x 321 x 215 990 400 16,4 31,0x 371 x 249 1000 400 19,0 36,0x 412 x 277 1008 402 21,0 40,0

W 1000 x 450 x 286 W 40 x 18 x 192 970 450 18,0 21,0x 328 x 221 982 450 18,0 27,0x 363 x 244 992 450 18,0 32,0x 399 x 268 1000 451 19,0 36,0x 444 x 298 1008 453 21,0 40,0x 488 x 328 1016 455 23,0 44,0

Section Dimensions


U 30 x 15 1,74 30 15 4,0 4,5U 40 x 20 2,87 40 20 5,0 5,5U 40 x 35 4,87 40 35 5,0 7,0U 40 x 25 3,86 50 25 5,0 6,0U 50 x 38 5,59 50 38 5,0 7,0U 60 x 30 5,07 60 30 6,0 6,0U 65 x 42 7,09 65 42 5,5 7,5U 70 x 40 6,77 70 40 6,0 6,5

Section Dimensions


UPN 80 8,64 80UPN 100 10,60 100 50 6,0 8,5UPN 120 13,40 120 55 7,0 9,0UPN 140 16,00 140 60 7,0 10,0UPN 160 18,80 60 65 7,5 10,5UPN 180 22,00 180 70 8,0 11,0

UPN 200 25,30 200 75 8,5 11,5UPN 220 29,40 220 80 9,0 12,5UPN 240 33,20 240 85 9,2 13,0UPN 260 37,90 260 90 10,0 14,0UPN 280 41,80 280 95 10,0 15,0

UPN 300 46,20 300 100 10,0 16,0UPN 320 59,50 320 100 14,0 17,5UPN 350 60,60 350 100 14,0 16,0UPN 380 63,10 380 102 13,5 16,0

UPN 400 71,80 400 110 14,0 18,0


Reinforcing BarsPlain & Deformed

Comparison Specifications

Country Specification Grade Yield Strength Tensile Strength Elongation

Mild Steel 250 N/ mm Actual Yield 22Britain BS 4449 Strees x 1,15

High Yield 460 N/ mm Actual Yield 12Stress x 1,15

40000 psi 70000 psi No. 3,7 > 11No.4,5,6 > 12

Grade 40 (300 MPa) (500 MPa)U.S.A ASTM (28,12 kg f/ mm) (49,2 kg f/ mm)

A 615 60000 psi 90000 psi No. 3,4,5,6 9Grade 60 (400 MPa) (500 MPa) No. 7,8 8

(42,18 kg f/ mm (63,29 kg f/ mm) No. 9,10,11,14,18,7

IR 2200 KP/ cm 3400 KP/ cm(220 N/ mm) (340 N/ mm) 18

BSt 22/ 34 RU (22,45 kg f/ mm) (34,69 kg f/ mm)Germany DIN 488

IIIU (4200 KP/ cm) (5000 KP/ cm)(420 N/ mm) (500 N/ mm) 10

BSt 42/ 52 RU (42,86 kg f/ mm) (51,02 kg f/ mm)

SD 24 24 kg f/ mm 39-53 kg f/ mm < D22 13235 N/ mm 382-520 N/ mm > D25 22

SD 30 30 kg f/ mm 49-63 kg f/ mm < D22 14Japan Jis 294 N/ mm 480-618 N/ mm > D25 18

G3112 SD 35 35 kg f/ mm 50 kg f/ mm < D22 18343 N/ mm 490 N/ mm > D25 20

SD 40 40 kg f/ mm 57 kg f/ mm < D22 16392 N/ mm 550 N/ mm > D25 19


NFA FeE 22 215 N/ mm 330-490 N/ mm 22France 35015 FeE 24 235 N/ mm 410-490 N/ mm 25

35016 FeE 40 400 N/ mm 480 N/ mm 14FeE 50 500 N/ mm 550 N/ mm 12

Nominal NominalDiameter Weight

D kg/mmm

6 0,228 0,40

10 0,6212 0,8914 1,2116 1,5818 2,0019 2,2320 2,47


D kg/mmm

22 2,9824 3,5525 3,8526 4,1728 4,83

30 5,5532 6,3136 7,9940 9,87

Rounds, Squares, Structural Tees from Universal Beams

Size Weight perin mm metreDia kgs

5 0.1546 0.2217 0.3028 0.3949 0.49910 0.61611 0.74612 0.88713 1.04114 1.20815 1.38716 1.57817 1.78118 1.99719 2.22520 2.46621 2.17822 2.98423 3.261


24 3.55125 3.86327 4.49429 5.18530 5.54832 6.31335 7.55238 8.90240 9.86442 10.87645 12.48548 14.20550 14.41355 18.65058 20.74060 22.19561 22.94163 24.470


65 26.04967 27.67670 30.21075 34.68080 39.45885 44.54590 49.94095 55.642100 61.654105 67.973115 81.537120 88.781125 96.334130 104.19135 112.36140 120.84150 138.72

Rounds

Structural Tees from Universal Beams


5.0 0.1966.0 0.2828.0 0.50210.0 0.78511.5 1.03812.0 1.13014.5 1.65015.0 1.76616.0 2.00917.5 2.40420.0 3.14022.5 3.97425.0 4.90628.5 6.37630.0 7.06535.0 9.61638.0 11.33540.0 12.560


45.0 15.89650.0 19.62555.0 23.74660.0 28.26065.0 33.16070.0 38.46575.0 44.15680.0 50.24085.0 56.71690.0 63.58595.0 70.846100.0 78.500105.0 86.546110.0 94.985120.0 113.040130.0 132.670140.0 153.860150.0 176.630

Metric dimensions From universal beamDepth of Width Thickness Imperial dimensionsFrom universal Area of beam

serial size mass serial size mass section section web flange section serial size mass serial size massmm kg/m mm kg/m mm mm mm mm cm inch lbs/ft inch lbs/ft

419 x 457 194 914 x 419 388 460.2 420.5 21.5 36.6 247.3 16 1/2 x 18 130 36 x 16 1/2 260172 343 455.7 418.5 194.0 32.0 218.8 115 230

305 x 457 145 914 x 305 289 463.3 307.8 19.6 32.0 184.4 12 x 18 105 36 x 12 210127 253 459.2 305.5 17.3 27.9 161.4 85 170112 224 455.2 304.1 15.6 23.9 142.6 75 150101 201 451.5 303.4 15.2 20.2 128.2 67.5 135

292 x 419 113.0 838 x 292 226 425.5 293.9 16.1 26.8 144.4 11 1/2 x161/2 76 33 x 11 1/2 15297 194 420.4 292.4 14.7 21.7 123.6 65 13088 176 417.4 291.6 14.0 18.8 112.1 59 118

267 x 381 99 762 x 267 197 384.8 268.0 15.6 25.4 125.4 10 1/2 x 15 66 30 x 10 1/2 13287 176 381.0 266.7 14.3 21.6 110.2 58 11674 147 376.9 265.3 12.9 17.5 94.2 49.5 99

254 x 343 85 686 x 254 170 346.5 255.8 14.5 23.7 108.3 10 x 13 1/2 57 27 x 10 11476 152 343.8 254.5 13.2 21.0 96.9 51 10270 140 241.8 253.7 12.4 19.0 89.3 47 9463 125 339.0 253.0 11.7 16.2 79.8 42 84

305 x 205 119 610 x 305 238 316.5 211.5 18.6 31.5 151.9 12 x 12 80 24 x 12 16090 179 608.7 307.0 14.1 23.6 114.0 60 12075 149 304.8 304.8 11.9 19.7 95.1 50 100

229 x 305 70 310 x 229 140 308.5 230.1 13.1 22.1 89.2 9 x 12 47 24 x 9 6163 125 305.9 229.0 11.9 19.6 79.8 42 8457 113 303.7 228.2 11.2 17.3 72.2 38 7651 101 301.1 227.6 10.6 14.8 64.6 34 68

178 x 305 46 610 x 178 91 301.3 178.4 10.6 15.0 57.8 7 x 12 30.5 24 x 7 6141 82 299.1 177.8 10.1 12.8 52.4 27.5 55

210 x267 61 533 x 210 122 272.3 211.9 12.8 21.3 77.9 8 1/4 x 10 1/2 41 21 x 8 1/4 8255 109 269.7 210.7 11.6 18.8 69.3 36.5 7351 101 268.4 210.1 10.9 17.4 64.6 34 6846 92 266.6 209.3 10.2 15.6 58.9 31 6241 82 264.2 208.7 9.6 13.2 52.2 27.5 52

165 x 267 37 533 x 165 73 264.4 165.6 9.3 13.5 46.3 6 1/2 x 10 1/2 24.5 21 x 6 1/2 4933 66 262.4 164.1 8.8 11.5 41.7 22 44

191 x 229 49 457 x 191 98 233.7 192.9 11.4 19.6 62.6 7 1/2 x 9 33 18 x 7 1/2 6645 89 231.8 192.0 10.6 17.7 57.0 30 6041 82 230.1 191.3 9.9 16.0 52.3 27.5 5537 74 228.6 190.5 9.1 14.5 47.5 25 5034 67 226.8 189.9 8.5 12.7 42.7 22.5 45

Squares


Reinforcing BarsPlain & Deformed

Comparison Specifications

Country Specification Grade Yield Strength Tensile Strength Elongation

Mild Steel 250 N/ mm Actual Yield 22Britain BS 4449 Strees x 1,15

High Yield 460 N/ mm Actual Yield 12Stress x 1,15

40000 psi 70000 psi No. 3,7 > 11No.4,5,6 > 12

Grade 40 (300 MPa) (500 MPa)U.S.A ASTM (28,12 kg f/ mm) (49,2 kg f/ mm)

A 615 60000 psi 90000 psi No. 3,4,5,6 9Grade 60 (400 MPa) (500 MPa) No. 7,8 8

(42,18 kg f/ mm (63,29 kg f/ mm) No. 9,10,11,14,18,7

IR 2200 KP/ cm 3400 KP/ cm(220 N/ mm) (340 N/ mm) 18

BSt 22/ 34 RU (22,45 kg f/ mm) (34,69 kg f/ mm)Germany DIN 488

IIIU (4200 KP/ cm) (5000 KP/ cm)(420 N/ mm) (500 N/ mm) 10

BSt 42/ 52 RU (42,86 kg f/ mm) (51,02 kg f/ mm)

SD 24 24 kg f/ mm 39-53 kg f/ mm < D22 13235 N/ mm 382-520 N/ mm > D25 22

SD 30 30 kg f/ mm 49-63 kg f/ mm < D22 14Japan Jis 294 N/ mm 480-618 N/ mm > D25 18

G3112 SD 35 35 kg f/ mm 50 kg f/ mm < D22 18343 N/ mm 490 N/ mm > D25 20



NFA FeE 22 215 N/ mm 330-490 N/ mm 22France 35015 FeE 24 235 N/ mm 410-490 N/ mm 25

35016 FeE 40 400 N/ mm 480 N/ mm 14FeE 50 500 N/ mm 550 N/ mm 12


D kg/mmm

6 0,228 0,40

10 0,6212 0,8914 1,2116 1,5818 2,0019 2,2320 2,47


D kg/mmm

22 2,9824 3,5525 3,8526 4,1728 4,83

30 5,5532 6,3136 7,9940 9,87

Rounds, Squares, Structural Tees from Universal Beams


5 0.1546 0.2217 0.3028 0.3949 0.49910 0.61611 0.74612 0.88713 1.04114 1.20815 1.38716 1.57817 1.78118 1.99719 2.22520 2.46621 2.17822 2.98423 3.261


24 3.55125 3.86327 4.49429 5.18530 5.54832 6.31335 7.55238 8.90240 9.86442 10.87645 12.48548 14.20550 14.41355 18.65058 20.74060 22.19561 22.94163 24.470


65 26.04967 27.67670 30.21075 34.68080 39.45885 44.54590 49.94095 55.642100 61.654105 67.973115 81.537120 88.781125 96.334130 104.19135 112.36140 120.84150 138.72

Rounds

Structural Tees from Universal Beams


5.0 0.1966.0 0.2828.0 0.50210.0 0.78511.5 1.03812.0 1.13014.5 1.65015.0 1.76616.0 2.00917.5 2.40420.0 3.14022.5 3.97425.0 4.90628.5 6.37630.0 7.06535.0 9.61638.0 11.33540.0 12.560


45.0 15.89650.0 19.62555.0 23.74660.0 28.26065.0 33.16070.0 38.46575.0 44.15680.0 50.24085.0 56.71690.0 63.58595.0 70.846100.0 78.500105.0 86.546110.0 94.985120.0 113.040130.0 132.670140.0 153.860150.0 176.630

Metric dimensions From universal beamDepth of Width Thickness Imperial dimensionsFrom universal Area of beam

serial size mass serial size mass section section web flange section serial size mass serial size massmm kg/m mm kg/m mm mm mm mm cm inch lbs/ft inch lbs/ft

419 x 457 194 914 x 419 388 460.2 420.5 21.5 36.6 247.3 16 1/2 x 18 130 36 x 16 1/2 260172 343 455.7 418.5 194.0 32.0 218.8 115 230

305 x 457 145 914 x 305 289 463.3 307.8 19.6 32.0 184.4 12 x 18 105 36 x 12 210127 253 459.2 305.5 17.3 27.9 161.4 85 170112 224 455.2 304.1 15.6 23.9 142.6 75 150101 201 451.5 303.4 15.2 20.2 128.2 67.5 135

292 x 419 113.0 838 x 292 226 425.5 293.9 16.1 26.8 144.4 11 1/2 x161/2 76 33 x 11 1/2 15297 194 420.4 292.4 14.7 21.7 123.6 65 13088 176 417.4 291.6 14.0 18.8 112.1 59 118

267 x 381 99 762 x 267 197 384.8 268.0 15.6 25.4 125.4 10 1/2 x 15 66 30 x 10 1/2 13287 176 381.0 266.7 14.3 21.6 110.2 58 11674 147 376.9 265.3 12.9 17.5 94.2 49.5 99

254 x 343 85 686 x 254 170 346.5 255.8 14.5 23.7 108.3 10 x 13 1/2 57 27 x 10 11476 152 343.8 254.5 13.2 21.0 96.9 51 10270 140 241.8 253.7 12.4 19.0 89.3 47 9463 125 339.0 253.0 11.7 16.2 79.8 42 84

305 x 205 119 610 x 305 238 316.5 211.5 18.6 31.5 151.9 12 x 12 80 24 x 12 16090 179 608.7 307.0 14.1 23.6 114.0 60 12075 149 304.8 304.8 11.9 19.7 95.1 50 100

229 x 305 70 310 x 229 140 308.5 230.1 13.1 22.1 89.2 9 x 12 47 24 x 9 6163 125 305.9 229.0 11.9 19.6 79.8 42 8457 113 303.7 228.2 11.2 17.3 72.2 38 7651 101 301.1 227.6 10.6 14.8 64.6 34 68

178 x 305 46 610 x 178 91 301.3 178.4 10.6 15.0 57.8 7 x 12 30.5 24 x 7 6141 82 299.1 177.8 10.1 12.8 52.4 27.5 55

210 x267 61 533 x 210 122 272.3 211.9 12.8 21.3 77.9 8 1/4 x 10 1/2 41 21 x 8 1/4 8255 109 269.7 210.7 11.6 18.8 69.3 36.5 7351 101 268.4 210.1 10.9 17.4 64.6 34 6846 92 266.6 209.3 10.2 15.6 58.9 31 6241 82 264.2 208.7 9.6 13.2 52.2 27.5 52

165 x 267 37 533 x 165 73 264.4 165.6 9.3 13.5 46.3 6 1/2 x 10 1/2 24.5 21 x 6 1/2 4933 66 262.4 164.1 8.8 11.5 41.7 22 44

191 x 229 49 457 x 191 98 233.7 192.9 11.4 19.6 62.6 7 1/2 x 9 33 18 x 7 1/2 6645 89 231.8 192.0 10.6 17.7 57.0 30 6041 82 230.1 191.3 9.9 16.0 52.3 27.5 5537 74 228.6 190.5 9.1 14.5 47.5 25 5034 67 226.8 189.9 8.5 12.7 42.7 22.5 45

Squares


Grey cast iron GG 25 (and nodular cast iron GGG)Round bars - el. continuous casting/hydraulic systems

20 2,5 75 32,0 140 112,0 250 356,025 3,6 80 36,5 150 128,0 260 385,030 5,0 85 41,0 160 146,0 270 415,035 7,0 90 46,0 170 165,0 280 447,040 9,0 95 52,0 180 184,0 300 513,045 11,5 100 57,0 190 206,0 310 563,050 14,5 105 63,0 200 228,0 320 599,055 17,0 110 69,0 210 251,0 350 698,060 20,5 115 76,0 220 276,0 370 780,065 24,0 120 82,0 230 301,0 380 844,070 28,0 130 96,5 240 328,0 400 911,0

DIA Weight DIA Weight DIA Weight DIA Weightmm Ø kg/m mm Ø kg/m mm Ø kg/m mm Ø kg/m

40 x 20 3,5 100 x70 29,0 150 x 70 101,0 190 x 80 174,045 x 20 5,0 110 x 60 48,0 150 x 80 92,0 190 x 100 150,050 x 20 6,0 110 x 70 41,0 150 x 90 82,0 190 x 130 110,060 x 30 15,5 110 x 80 32,5 150 x 105 65,0 200 x 145 109,070 x 30 23,0 120 x 50 68,0 160 x 80 110,0 210 x 100 195,070 x 40 19,0 120 x 60 62,0 160 x 90 100,0 210 x 120 170,070 x 45 16,6 120 x 70 55,0 160 x 100 89,0 210 x 160 106,080 x 30 31,0 120 x 80 46,0 160 x 110 77,0 220 x 120 195,080 x 40 27,0 130 x 60 76,0 160 x 120 64,0 225 x 175 115,090 x 40 37,0 130 x 80 60,0 170 x 80 128,0 250 x 120 275,090 x 45 34,8 130 x 90 51,0 170 x 100 108,0 250 x 200 128,090 x 50 32,0 130 x 100 39,0 170 x 130 69,0 260 x 180 206,0100 x 40 49,0 140 x 70 84,0 180 x 90 139,0 280 x 210 195,0100 x 50 43,0 140 x 70 66,0 180 x 130 89,0 320 x 250 243,0100 x 60 36,5 140 x 100 55,0 180 x 140 73,0

30 x 30 6,7 70 x 70 36,6 100 x 100 74,7 140 x 140 142,040 x 40 11,9 80 x 80 47,8 110 x 110 90,3 150 x 150 163,045 x 45 15,1 85 x 85 54,0 120 x 120 107,5 160 x 160 186,050 x 50 18,7 90 x 90 60,5 130 x 130 123,0 200 x 200 290,060 x 60 26,9

Size Weight Size Weight Size Weight Size Weightmm Ø kg/m mm Ø kg/m mm Ø kg/m mm Ø kg/m

Size Weight Size Weight Size Weight Size Weightmm Ø kg/m mm Ø kg/m mm Ø kg/m mm Ø kg/m

OD x ID OD x ID OD x ID OD x ID

Bushings GG 25- el. continuous casting/hydraulic systems

Square bars - el. continuous casting/hydraulic systems


Copper Tube

d s KG/MTR

4 1 0.084

5 0.5 0.063

5 1 0.112

6 0.5 0.077

6 1 0.140

6 1.5 0.189

7 1 0.168

8 1 0.196

8 1.5 0.272

10 1 0.252

10 1.5 0.356

10 2 0.447

10 2.5 0.524

11 1 0.279

12 1 0.307

12 1.5 0.440

12 2 0.559

12 3 0.755

13 1.5 0.482

13 3 0.838

14 2 0.671

14 3 0.922

15 1 0.391

15 1.5 0.566

15 2 0.727

15 2.5 0.873

16 1.5 0.608

16 2 0.782

16 3 1.090

16 4 1.341

18 1 0.475

18 1.5 0.692

18 2 0.894

20 1 0.531

20 1.5 0.776

20 2 1.006

20 2.5 1.223

20 5 2.096

22 1 0.587

22 1.5 0.859

22 2 1.118

22 3 1.593

23 1.5 0.901

23 2 1.174

24 2 1.230

24 3 1.761

25 2 1.286

25 2.5 1.572

25 5 2.795

25 7.5 3.668

26 1.5 1.027

26 2 1.341

26 3 1.928

28 1 0.755

d s KG/MTR

28 1.5 1.111

28 2 1.453

28 4 2.683

30 2 1.565

30 2.5 1.921

30 3 2.264

30 5 3.493

32 1 0.866

32 2 1.677

33 1.5 1.320

33 4 3.242

34 2 1.789

35 1 0.950

35 1.5 1.404

35 2 1.844

35 2.5 2.271

35 5 4.192

35 75 5.764

36 2 1.900

36 3 2·767

38 1.5 1.530

38 2 2.012

40 1.5 1.614

40 2.5 2.620

40 3 3.104

40 5 4.891

40 10 8.384

42 2 2.236

42 3 3.270

44 2 2.347

44.5 2 2.375

45 5 5.589

45 10 9·781

46 2 2.459

48 1.5 1.949

50 2 2.683

50 3 3.940

50 4 5.142

50 5 6.288

52 1 1.425

52 1.5 2.117

53 1.5 2.159

54 2 2.906

55 5 6·987

55 10 12.576

56 3 4.443

57 3 4.527

57 3.5 _ 5.233

58 3 4.611

60 2.5 4.017

60 5 7.685

60 10 13.973

60 15 18.864

63 3 5.030

64 2 3.465

65 5 8.384

70 2.5 4.716

70 5 9.082

70 10 16.768

74 2 4.024

75 2.5 5.065

76 3 6.120

d s KG/MTR

80 2 4.360

80 5 10.480

80 10 19.562

84 2 4.583

85 2.5 5.764

86 3 6.959

89 2.5 6.046

89 3 7.210

90 5 11.877

90 10 22.357

95 2.5 6.463

100 2.5 6.812

100 5 13.274

100 10 25.151

100 20 44.714

102 1.5 4.213

104 2 5.701

105 2.5 7.161

108 2.5 7.375

108 3 8.803

108 4 11.626

110 5 14.672

120 5 16.069

120 10 30.741

130 5 17.466

131 3 10.731

132 3.5 12.569

133 3.5 12.667

133 4 14.420

135 5 18.165

140 10 36.330

150 5 20.261

150 10 39.124

156 3 12.827

158 5 21.379

159 3 13.079

159 6 25.654

160 5 21.658

160 10 41.919

170 5 23.055

170 10 44.714

180 5 24.453

180 10 47.508

191 4 20.904

200 5 27.247

200 10 53.097

206 3 17.019

210 5 28.645

220 10 58.687

256 3 21.211

264 5 36.190

267 3 22.133

300 5 41.220


Copper square Tube

s a b KG/sqm 1 2 3

0.3 600 2000 2.670 20.4 1000 2000 3.560 20.5 1000 1100 4.450 20.5 1000 2000 4.450 20.6 1000 2000 5.340 20.7 1000 2000 6.230 20.8 1000 2000 7.120 20.8 1250 2500 7.120 21 1000 2000 8.900 1 21 1250 2500 8.900 21.2 1000 2000 10.680 21.5 1000 2000 13.350 1 21.5 1250 2500 13.350 21.5 1500 3000 13.350 22 1000 2000 17.800 1 2 32 1250 2500 17.800 22 1500 3000 17.800 32.5 1000 2000 22.250 1 22.5 1250 2500 22.250 22.5 1500 3000 22.250 23 1000 2000 26.700 23 1250 2500 26.700 24 1000 2000 35.600 1 24 1250 2500 35.600 24.5 1000 2000 40.050 25 1000 2000 44.500 1 2 36 1000 2000 53.400 1 2 36 1250 2500 53.400 26 1500 3000 53.400 18 1020 2020 71.200 2 310 1020 2020 89.000 2 312 1020 2020 106.800 1 315 500 Z000 133.500 115 1020 3000 133.500 320 1020 2020 178.000 320 1040 2050 178.000 325 1020 2020 222.500 1 330 1020 2020 267.000 340 1020 2020 356.000 350 1020 3020 445.000 360 970 3120 534.000 360 1020 2020 534.000 380 940 2390 712.000 3100 600 2100 890.000 3100 1020 2020 890.000 3120 600 2000 1068.000 3

a a s KG/sqm 1 2 3

4 4 0.5 0.062 34 4 1 0.107 15 5 0.5 0.080 15 5 1 0.142 1 36 4 1 0.142 38 5 1 0.196 38 6 1 0.214 38 8 1 0.249 38 8 1.5 0.347 310 5 1 0.231 310 6 1 0.249 1 310 8 1 0.285 310 10 1 0.320 310 10 2 0.570 2 312 6 1 0.285 312 6 1.5 0.401 1 312 8 1 0.320 312 10 2 0.641 312 12 1 0.392 115 10 1 0.409 316 14 2 0.926 317.5 17.5 3 0.000 318 18 1 0.605 120 10 1 0.498 320 12 1 0.534 120 12 1.5 0.774 320 14 2 1.068 320 20 1.5 O.9BB 322 12 2 1.068 326 17 3 4.278 128 14 3 5.480 130 10 1.5 0.988 335 10 3 2.083 140 30 4 4.414 360 35 2 3.240 2


Copper Bars

Copper Square Bars Copper Hexagon Bars

d KG/MTR 1 2 3

2.5 0.044 13 0.063 14 0.112 1

5 0.175 16 0.252 17 0.342 1

7.5 0.393 18 0.447 19 0.566 1

10 0.699 111 0.845 112 1.006 1

14 1.369 115 1.572 116 1.789 1

18 2.264 120 2.795 124 4.024 1

25 4.367 126 4.723 128 5.477 1

E - C

U

SF -

CU

SE -

CU

a a KG/MTR

5 5 0.2236 6 0.3208 8 0.570

10 10 0.89012 12 1.28214 14 1.744

15 15 2.00318 18 2.88420 20 3.560

22 22 4.30825 25 5.56330 30 8.010

35 35 10.90340 40 14.24050 50 22.250

60 60 32.04080 80 56.96090 90 72.090

100 100 89.000

d KG/MTR 1 2 3

29 5.876 130 6.288 133 7.608 1

35 8.558 136 9.055 140 11.178 1

45 14.148 150 17.466 160 25.151 1

65 29.518 170 34.234 180 44.714 1

90 56.591 1100 69.865 1110 84.537 1

116 94.010 3120 100.606 1127 112.685 3

130 118.072 1150 157.196 1160 178.923 1

170 201.987 1180 226.363 1200 279.460 1

300 628.785 3318 706.503 3410 1174.431 3

500 1746.625 3

E - C

U

SF -

CU

SE -

CU

Sw KG/MTR

14 1.51015 1.73419 2.782

36 9.988


Copper PipeASTM- Seamless Red Brass and Copper Pipe

Copper PipeASTM- Seamless Copper Water Tube

Nominal Dimensions (Inches) and Weights

Dimensions and Weights

Size Outside Regular Extra Strong(IPS) Diameter Inside Wall Lbs. per Foot Inside Wall Lbs. per Foot

Diam- Thick- Diam- Thick-eter ness Brass Copper eter ness Brass Copper

1/8 .405 .281 .062 .253 .259 .205 .100 .363 .3711/4 .540 .376 .082 .447 .457 .294 .123 .611 .6253/8 .675 .495 .090 .627 .641 .421 .127 .829 .8471/2 .840 .626 .107 .934 .955 .542 .149 1.23 1.25

3/4 1.050 .822 .114 1.27 1.30 .736 .157 1.67 1.711 1.315 1.063 .126 1.78 1.82 .951 .182 2.-16 2.51

1 1/4 1.660 1.368 .146 2.63 2.69 1.272 .194 3.39 3.461 1/2 1.900 1.600 .150 3.13 3.20 1.494 .203 1.10 4.19

2 2.375 2.063 .156 4.12 4.22 1.933 .221 5.67 5.802 1/2 2.875 2.501 .187 5.99 6.12 2.315 .280 8.66 8.85

3 3.500 3.062 .219 8.56 8.76 2.892 .304 11.6 11.83 1/2 4.000 3.500 .250 11.2 11.4 3.358 .321 1 2.1 14.4

4 4.500 4.000 .250 12.7 12.9 3.818 .341 16.9 17.35 5.562 5.062 .250 15.8 16.2 4.812 .375 23.2 23.76 6.625 6.125 .250 19.0 19.4 5.751 .437 32.2 32.9

8 8.625 8.001 .312 30.9 31.6 7.625 .500 48.4 49.510 10.750 10.020 .365 45.2 46.2 9.750 .500 61.1 62.412 12.750 12.000 .375 55.3 65.5 ... .. ... ...

Above pipe suitable for use in plumbing lines, boiler feed lines, and similar applications. Data in table abstracted from ASTM B 42 and B 43.

Standard Nominal Type K Tube Type L Tube Type M Tubesize outside Wall Weight Wall Weight Wall Weight

of tube diameter thickness per foot thickness per foot thickness per footof tube

Inches Inches Inches Pounds Inches Pounds Inches Pounds

1/8 .375 .035 .145 .030 .126 .025 .1062/8 .500 .049 .269 .035 .198 .025 .1451/2 .625 .049 .344 .040 .285 .028 .204

5/8 .750 .049 .418 .042 .362 .030 .2633/4 .875 .065 .641 .045 .455 .032 .3281 1.125 .065 .839 .050 .655 .035 .465

1 1/4 1.375 .065 1.04 .055 .884 .042 .682

1 1/2 1.625 .072 1.36 .060 1.14 .049 .9402 2.125 .083 2.06 .070 1.75 .058 1.46

2 1/2 2.625 .095 2.93 .080 2.48 .065 2.033 3.125 .109 4.00 .090 3.33 .072 2.68

3 1/2 3.625 .120 5.12 .100 4.29 .083 3.584 4.125 .134 6.51 .110 5.38 .095 4.665 5.125 .160 9.67 .125 7.61 .109 6.666 6.125 .192 13.9 .140 10.2 .122 8.92

8 8.125 .271 25.9 .200 19.3 .170 16.510 10.125 .338 40.3 .250 30.1 .212 25.612 12.125 .405 57.8 .280 40.4 .254 36.7

Copper water tubes are designed for plumbing systems, underground water services, etc. The tubing is generally used with solder, flared, or compression type fittings. Data in table(abstracted fromASTM B88) covers three wall thicknesses designated Types K, L, and M. Types K and L are furnished in coils or straight lengths. Coiled lengths are annealed after coiling. Straight lengare furnished in the drawn temper unless annealing is specified. Type M is furnished in straight lengths and in drawn temper only.


Brass Tubes

d S KG/MTR

2 0.5 0.0203 1 0.0533.5 1 0.066

4 0.5 0.0464 1 0.0795 0.5 0.059

5 0.75 0.0845 1 0.1065 1.5 0.138

6 0.5 0.0736 1 0.1326 1.5 0.178

7 0.5 0.0867 1 0.1587 1.5 0.218

8 0.5 0.0998 1 0.1858 1.5 0.257

8 2 0.3179 1 0.2119 1.5 0.297

10 0.5 0.12510 1 0.23710 1.5 0.336

10 2 0.42210 2.5 0.49510 3 0.554

10 3.5 0.60011 0.35 0.09812 1 0.290

12 1.5 0.41512 2 0.52812 3 0.712

13 1 0.31713 1.5 0.45514 1 0.343

14 1.5 0.49514 2 0.63314 3 0.870

15 1 0.36915 1.5 0.53415 2 0.686

15 2.5 0.82416 1 0.39616 1.5 0.574

16 2 0.73916 3 1.02916.5 1.75 0.681

17 1 0.42217 2.5 0.95618 1 0.448

18 1.5 0.65318 4 1.47718 5 1.714

20 1 0.50120 1.5 0.73220 2 0.950

20 3 1.34520 4 1.68820 5 1.978

d S KG/MTR

20 6 2.21622 1 0.55422 3 1.503

22 4 1.89922 5 2.24223 1.5 0.851

24 2.5 1.41824 3 1.66225 1 0.633

25 1.5 0.93025 2 1.21325 2.5 1.484

25 5 2.63826 2 1.26628 1 0.712

28 1.5 1.04828 2 1.37230 1 0.765

30 1.5 1.12830 2 1.47730 2.5 1.813

30 3 2.13630 5 3.29731 2 1.530

31 2.5 1.87931 5 3.42932 1 0.818

32 2 1.58332 3 2.29533 1 0.844

33 1.5 1.24633 2 1.63534 2.5 2.077

34 3.5 2.81634 5.5 4.13434 7 4.985

35 1.5 1.32535 7.5 5.44036 1 0.923

37 3.5 3.09338 1 0.97639 3 2.849

39 4 3.69339 4.5 4.09540 1 1.029

40 1.5 1.52340 2 2.00540 2.5 2.473

40 3 0.00040 5 4.61642 1.5 1.602

42 2 2.11043 1.5 1.64243 2 2.163

43 3 3.16543 3.5 3.69044 1.5 1.681

44 2 2.21644 3 3.24445 1.5 1.721

d S KG/MTR

45 3 3.32345 4.5 4.80745 5 5.275

47 7 7.38548 0.5 0.62648 1.5 1.840

48 8 8.44049 1.5 1.87950 1.5 1.919

50 2 2.53250 2.5 3.13250 5 5.935

50 10 10.55050 15 13.84752 1 1.345

52 2 2.63852 5 6.19852 6.5 7.801

53 5 6.33054 3 4.03654 4 5.275

55 2.5 3.46255 5 6.59456 10 12.133

57 3 4.27557 5 6.85858 3.5 5.031

58 4 5.69758 5 6.99058 6 8.229

58 8 10.55058 10 12.66060 2.5 3.792

60 15 17.80463 3 4.74864 12 16.459

65 3 4.90665 10 14.86066 1.5 2.552

66 6 9.49566 8 12.23868 2.5 4.319

68 14 19.94070 1.5 2.71070 2.5 4.451

70 15 21.76072 1.5 2.78972 3.5 6.324

73 1.5 2.82975 2.5 4.78175 10 17.144

76 6 11.07877 2 3.95678 6 11.394

80 3.5 7.06280 5 9.89180 10 18.463

80 20 31.65181 6.5 12.77382 1.5 3.185


Brass tube, -sheets, -strip, -foil

Brass tube

Brass strip MS 63

Brass sheets

Brass foil MS 63

d S KG/MTR

84 2 4.32684 8.5 16.92785 2.5 5.440

85 6 12.50285 7 14.40187 9.5 19.419

90 4 9.07390 5 11.21090 10 21.101

92 5 11.47495 3 7.28095 8.5 19.393

96 9 20.65297 10.5 23.956100 2.5 6.432

100 4 10.128100 5 12.529100 10 23.738

100 15 33.629100 20 42.202101 12 28.170

104 14.5 34.229105 2.35 6.363105 5 13.188

106 6 15.826108 4 11.103110 4 11.183

110 5 13.847112 12 30.521116 6 17.408

125 2.5 8.078126 3 9.733130 5 16.485

130 7.5 24.233140 10 34.289155 7.5 29.178

155.6 7.95 30.961156 3 12.107160 10 39.564

180 20 84.403185 5 24.021200 5 25.717

200 10 50.711210 5 27.357

s a KG/MTR

0.05 100 0.0420.1 43 0.0000.1 65 0.000

0.1 300 0.2520.2 30 0.0500.2 152 0.255

0.3 50 0.1260.4 38 0.0000.4 50 0.168

0.4 140 0.4700.5 15 0.0630.5 18 0.076

0.5 28 0.1180.6 60 0.3020.8 10 0.067

O.8 20 0.134O.8 116 0.7801 6 0.050

1 8 0.0671 12 0.1011 25 0.210

1 50 0.4201 60 0.5041 100 0.840

1.5 20 0.2521.5 28 0.3532 18 0.302

2 46 0.7732 53 0.8902.5 20 0.420

2.5 50 1.0502.5 57 1.197

s a b KG/QM

0.2 600 2000 1.6800.3 600 2000 2.5200.4 600 2000 3.360

0.5 540 2000 4.2000.5 600 2000 4.2000.5 1000 2000 4.200

0.6 600 2000 5.0400.6 1000 2000 5.0400.7 350 1220 5.880

0.7 480 2000 5.8800.7 600 2000 5.8800.7 1000 2000 5.880

0.75 1000 2000 6.300O.B 600 2000 6.7201 600 2000 8.400

1 1000 2000 8.4001 1250 2500 8.4001.5 600 2000 12.600

1.5 1000 2000 12.6002 600 2000 16.8002 1000 2000 16.800

2 1250 2500 16.8002.25 600 2000 18.9002.5 600 2000 21.000

2.5 1000 2000 21.0003 600 2000 25.2003 1000 2000 25.200

3 1250 2500 25.2004 600 2000 33.6004 1000 2000 33.600

5 600 2000 42.0005 1000 2000 42.0006 600 2000 50.400

6 1000 2000 50.4008 600 2000 67.2008 1000 2000 67.200

10 1000 2000 84.00012 1020 2020 100.80013 1180 2470 109.200

14 600 2000 117.60014 1000 2000 117.60015 1020 2020 126.000

20 1020 2020 168.00025 1020 2020 210.00030 1020 2020 252.000

35 1020 2020 294.00040 1020 2020 336.00045 1020 2020 378.000

50 1020 2020 420.00060 1020 2020 504.00065 1500 3000 546.000

80 1020 2020 672.000100 600 2000 840.000120 600 2000 1008.000

140 600 2000 1176.000

s a b KG/MTR

0.01 300 650 0.0840.02 300 650 0.1680.03 300 650 0.252

0.04 300 650 0.3360.05 300 650 0.0820.06 300 650 0.504

0.08 300 650 0.672


Brass round bar, brass square bar, brass hexagon bar

Brass round bar Brass square bar

Brass hexagon bar

a a KG/MTR4 4 0.1345 5 0.2106 6 0.3027 7 0.4128 8 0.5389 9 0.68010 10 0.84012 12 1.21015 15 1.89017 17 2.42818 18 2.72220 20 3.36022 22 4.06625 25 5.25030 30 7.56035 35 10.29040 40 13.44045 45 17.01046 46 17.77450 50 21.00055 55 25.41060 60 30.24065 65 35.49070 70 41.16075 75 47.81380 80 53.76090 90 68.040100 100 84.000120 120 122.400130 130 141.960

KG/MTR2 0.0262.5 0.0423 0.0613.5 0.0814 0.1065 0.1655.5 0.1996 0.2376.5 0.2797 0.3238 0.4228.5 0.4769 0.53410 0.63611 0.79812 0.91613 1.11413.5 1.20214 1.30814.5 1.38615 1.50116 1.70817 1.95218 2.16219.5 2.50720 2.66921 2.90822 3.22923 3.57324 3.84325 3.97426 4.45828 5.17029 5.54630 6.00531 6.33732 6.75234 7.62335 7.78936 8.54637 9.02738 9.52240 10.55042 11.63244 12.76645 12.87648 15.19350 16.48552 17.83055 20.43060 23.45665 27.86070 32.31175 37.09180 42.20285 47.64290 53.411100 65.940105 73.564110 79.787120 94.954130 107.459140 129.242150 148.365160 170.816180 216.189190 238.043200 263.760225 333.821230 352.975240 379.814250 417.031280 516.970300 600.525330 718.087350 807.765

Sw KG/MTR4 0.1165 0.1826 0.2627 0.3568 0.4669 0.58910 0.72711 0.88012 1.04713 1.22914 1.44315 1.63716 1.86217 2.10218 2.35719 2.62621 3.20822 3.52024 4.19027 5.30230 6.54632 7.44836 9.42738 10.50341 12.22742 12.83146 15.39147 16.06760 26.18570 35.64080 47.10585 53.17790 58.916


Brass Flat Bars

a b KG/MTR

5 6 0.1266 2 0.1016 4 0.202

6 5 0.2527 2,5 0.1478 2 0.134

8 3 0.2028 4 0.2698 5 0.336

10 2 0.16810 3 0.25210 4 0.336

10 5 0.42010 6 0.50410 8 0.672

12 2 0.20412 3 0.30212 4 0.403

12 5 0.50412 6 0.61212 8 0.806

14 4 0.47015 2 0.25215 3 0.378

15 4 0.50415 5 0.63815 6 0.756

15 8 1.02015 10 1.26016 8 1.075

20 2 0.33620 3 0.50420 4 0.672

20 5 0.84020 6 1.02020 8 1.360

20 10 1.68020 12 2.01620 15 2.520

22 4 2.73925 3 0.63025 4 0.840

25 5 1.06325 6 1.26025 8 1.680

25 10 2.10025 15 3.15025 20 4.250

30 2 0.50430 3 0.75630 4 1.008

30 5 1.26030 6 1.51230 8 1.992

30 10 2.52030 12 3.02430 15 3.825

30 20 5.04035 2 0.58835 3 0.882

35 4 1.19035 5 1.48835 6 1.764

35 8 2.35235 10 2.94035 12 3.528

35 15 4.46335 20 5.88040 1,5 0.504

40 3 1.02040 3,5 1.17640 4 1.360

a b KG/MTR

40 4,5 1.51240 5 1.68040 6 2.016

40 8 2.68840 10 3.36040 15 5.040

40 20 6.88040 25 8.40040 30 10.080

45 5 1.89045 8 3.02445 10 3.780

50 3 1.26050 4 1.70050 5 2.100

50 6 2.52050 10 4.25050 12 5.100

50 13 5.46050 15 6.37550 20 8.500

50 25 10.50050 30 12.75055 15 6.930

60 4 2.01660 5 2.55060 6 3.024

60 8 4.03260 10 5.04060 12 8.120

60 15 7.65060 20 10.20060 30 15.120

60 40 20.16070 5 2.97570 6 3.528

70 8 4.70470 10 5.95070 12 7.140

70 20 11.76080 4 2.72080 5 3.400

80 6 4.08080 10 6.80080 15 10.200

80 20 13.44080 25 16.88080 30 20.160

80 40 26.88080 50 33.60090 2 1.512

90 5 3.78090 10 7.56090 15 11.340

90 70 52.920100 5 4.200100 8 6.720

100 10 8.400100 12 10.320100 15 12.600

100 20 16.800100 25 21.000100 30 25.200

100 50 42.000120 10 10.080120 40 40.320

125 60 63.000140 60 71.400150 10 12.600

150 20 25.200150 70 89.250160 10 13.600

a

b


Aluminium tube

d s KG/MTR

4 0,5 0,0154 1 0,0255 1 0,034

6 0,5 0,0236 1 0,0427 1 0,051

8 0,75 0,0468 1 0,0598 1,5 0,083

10 0,75 0,05910 1 0,07610 1,5 0,108

10 2 0,13610 2,5 0,15910 3 0,178

12 1 0,09612 1,5 0,13412 2 0,170

12 3 0,22913 1 0,10213 1,5 0,146

13 3 0,25414 2 0,20315 1 0,119

15 1,5 0,17215 2 0,22016 1 0,127

16 1,5 0,18416 2 0,23716 3 0,331

18 1,5 0,20518 2 0,27118 3 0,382

18 4 0,47520 0,5 0,08520 1 0,161

20 1,5 0,23520 2 0,30120 2,5 0,371

20 3 0,42620 5 0,65922 1,5 0,261

22 2 0,34823 2 0,37624 2 0,394

25 1,5 0,30725 2 0,39025 2,5 0,477

25 3 0,56025 3,5 0,65525 5 0,848

26 2 0,40726 3 0,58528 1,5 0,337

28 2 0,45328 2,5 0,54028 3 0,636

28 4 0,83528 5 0,97530 1,5 0,376

30 2 0,47530 2,5 0,58330 3 0,687

d s KG/MTR

30 4 0,88230 5 1,06030 7 1,365

30 7,5 1,43132 2 0,50935 1,5 0,426

35 2 0,56035 2,5 0,68935 3 0,859

35 4 1,07935 5 1,30535 7,5 1,749

36 2 0,59136 3 0,83937 3 0,881

37 4 1,14038 3 0,89039 3,5 1,073

40 1,5 0,49040 2 0,64440 2,5 0,795

40 3 0,94140 3,5 1,14340 4 1,221

40 5 1,48440 6 1,77540 7 1,929

40 10 2,54342 2 0,67842 3 0,992

42 5 1,56842 9 2,65844 3 1,101

44 12 3,18345 2,5 0,90145 5 1,740

45 8 2,57645 10 2,96747 3 1,181

48 3 1,14548 4 1,49248 5 1,924

50 1,5 0,61750 2 0,81450 2,5 1,007

50 3 1,19550 4 1,60150 5 1,958

50 6 2,23850 7 2,61950 8 2,849

50 10 3,39150 12,5 3,97651 4 1,570

52 4 1,62852 6 2,28853 6 2,524

54 9 3,62455 2,5 1,11355 5 2,120

55 10 3,81556 3 1,34857 3 1,450

d s KG/MTR

57 8,5 3,44358 5 2,28860 2 0,983

60 2,5 1,21960 3 1,45060 4 2,005

60 5 2,39260 6 2,74760 8 3,529

60 10 4,23960 15 5,72361 11 4,594

64 4 1,99065 2,5 1,32565 4 2,023

65 5 2,54365 10 4,66365 15 6,362

65 20 7,63066 3 1,66267 8,5 4,216

70 2 1,15370 2,5 1,40970 3 1,704

70 4 2,32170 5 2,85770 8 4,207

70 10 5,08770 15 7,17670 20 8,478

72 5 2,79874 14 7,12275 2 1,219

75 2,5 1,53775 5 3,04475 10 5,511

76 3 1,85780 2 1,32380 2,5 1,643

80 3 1,91580 5 3,17980 6 3,708

80 8 4,88380 10 5,93580 15 8,511

80 20 10,17485 2,5 1,74985 5 3,481

85 10 6,35986 3 2,11190 2,5 1,855

90 3 2,21390 5 3,60390 10 6,782


Aluminium Tube, Aluminium Square Tube

Aluminium Square Tube d S KG/MTR

90 11 7.36790 15 9.78590 20 11.86990 25 13.77795 2.5 1.96195 7.5 5.56495 10 7.046100 2 1.662100 2.5 2.067100 4 3.256100 5 4.027100 10 7.832100 12 8.953100 12.5 9.273100 15 10.809100 16 11.690100 20 13.916100 21.25 14.187100 25 15.896105 10 8.054105 15 11.445106 3 2.620108 4 3.527108 5 4.482110 3 2.721110 5 4.451110 10 8.702110 15 12.081110 20 15.260110 25 18.016120 3 2.976120 5 4.875120 8 7.596120 10 9.326120 12.5 11.688120 15 13.353120 20 16.956120 25 20.657125 3 3.103125 5 5.087125 10 9.750130 3 3.230130 5 5.436130 10 10.174130 15 14.625130 20 18.652132 20 19.000133 12.5 12.770135 5 5.511135 9 9.614135 10 10.598140 5 5.723140 7.5 8.425140 10 11.430140 15 15.904140 20 20.347140 25 25.277140 30 28.703150 3 3.739150 5 6.055150 7.5 9.061150 8 9.631150 10 11.605150 15 17.168150 17.5 19.658150 20 22.043150 25 26.494160 4 5.293160 5 6.570160 6 7.838160 8 10.309160 10 12.717

160 15 18.440160 20 23.738160 30 34.901161 4 5.324165 25 30.442170 3 4.247

d S KG/MTR170 5 6.994170 10 13.565170 12.5 16.691170 15 19.711170 20 25.434170 25 31.871170 45 47.689180 6 8.851180 10 14.413180 15 21.527180 20 27.130185 9 13.429190 3 4.756190 6 9.360190 10 15.260200 4 6.647200 5 8.266200 6 9.868200 8 13.022200 10 16.108200 12.5 19.870200 15 23.526200 20 30.521200 25 37.091200 27.5 40.218200 4 6.918210 5 8.690210 10 16.956210 20 32.216220 10 18.265220 15 26.070220 30 48.325230 6 11.394230 10 18.652230 15 27.342230 25 43.450

a a s KG/MTR

10 10 1 0.09715 15 2 0.28120 10 2 0.281

20 20 2 0.38925 15 2 0.38925 25 1.5 0.391

25 25 2 0.49730 10 1.5 0.30030 15 2 0.443

30 20 2 0.49730 30 2 0.60530 30 3 0.875

34 20 3 0.77835 35 2 0.71340 20 2 0.605

40 20 2.5 0.74340 20 3 0.87540 25 3 0.956

40 25 5 1.52440 35 2.5 0.94540 40 2 0.821

40 40 2.5 1.01340 40 3 1.19940 40 4 1.596

50 20 2 0.71350 25 2 0.76750 30 3 1.199

50 40 4 1.77150 50 3 1.52350 50 4 1.987

60 20 2 0.82160 30 3 1.36160 40 2.5 1.283

60 40 3 1.52360 40 4 1.98760 60 3 1.847

60 60 4 2.41980 40 3 1.84780 40 4 2.419

80 50 4 2.63580 60 4 2.85180 80 3 2.49580 80 4 3.283100 18 2 1.231100 30 3 2.009

100 40 4 2.851100 50 2 1.577100 50 3 2.333

100 50 4 3.067100 100 4 4.147120 40 4 3.283

120 50 4 3.499140 40 2 1.901150 40 4 3.931

150 50 4 4.147160 40 4 4.147180 40 4 4.579

200 50 4 5.227200 80 4 5.875


Aluminium Sheets/Plates

s a b KG/sqm

0.3 500 2000 0.810

0.5 1000 1000 1.400

0.5 1000 2000 1.330

0.5 1250 2500 1.385

0.6 1000 2000 1.662

0.6 1220 3660 1.662

0.7 1000 2000 1.862

0.8 1000 2000 2.128

0.8 1220 3660 2.216

0.81 1220 2500 2.244

1 1000 2000 2.660

1 1220 3660 2.770

1 1250 2500 2.770

1 1500 3000 2.660

1.01 445 1220 2.828

1.2 1000 2000 3.192

1.2 1220 2500 3.324

1.2 1220 3660 3.324

1.2 1250 2500 3.324

1.2 1500 3000 3.240

1.27 445 1220 3.556

1.3 1220 3660 3.601

1.5 1000 2000 4.200

1.5 1020 2020 4.155

1.5 1250 2500 3.990

1.5 1500 3000 3.990

1.6 1220 3660 4.432

1.6 1250 2500 4.432

1.8 2000 5000 4.986

2 1000 2000 5.320

2 1220 3660 5.540

2 1250 2500 5.540

2 1500 3000 5.320

2 1980 2646 5.320

2.3 1220 3660 6.371

2.5 1000 2000 6.650

2.5 1200 3000 6.925

2.5 1200 5000 6.925

2.5 1250 2500 6.925

2.5 1500 3000 6.650

2.5 1700 4700 6.925

2.5 1850 2350 6.925

3 1000 2000 7.980

3 1220 3660 8.310

3 1250 2500 7.980

3 1250 3200 8.310

3 1500 2500 8.310

3 1500 3000 8.040

3.2 1200 2200 8.864

3.2 1700 2700 8.864

3.8 1000 2000 10.260

4 1000 2000 10.640

4 1220 3660 11.080

4 1250 2500 11.080

4 1380 4535 11.080

4 1500 2510 11.080

4 1500 2800 10.640

4 1500 3000 10.640

4.5 1500 3000 12.150

5 1000 2000 13.850

s a b KG/sqm

5 1000 3550 13.500

5 1250 2500 13.850

5 1500 2500 13.850

5 1500 3000 13.300

6 1000 2000 15.960

6 1020 2020 16.680

6 1250 2500 16.620

6 1250 5000 15.960

6 1500 3000 16.620

6 1500 4000 16.200

6.5 1200 2000 17.290

7 2610 5200 18.620

8 1000 2000 21.280

8 1020 2020 21.600

8 1025 3955 21.280

8 1250 2500 22.160

8 1500 3000 21.280

10 1000 2000 27.000

10 1020 2020 27.000

10 1200 1980 28.000

10 1250 2500 26.600

10 1500 3000 26.600

12 670 1090 33.600

12 1000 2000 31.920

12 1020 2020 33.240

12 1250 2500 33.240

12 1500 3000 31.920

14 975 2260 37.800

15 1000 2000 39.900

15 1005 3160 39.900

15 1020 2020 40.500

15 1250 2500 39.900

15 1500 3000 39.900

16 1020 2020 44.320

16 1250 2500 44.800

20 1000 2000 53.200

20 1010 1470 56.000

20 1020 2020 53.200

20 1250 2500 56.000

20 1500 3000 53.200

25 1000 2000 66.500

25 1020 2020 69.250

25 1200 1400 69.250

25 1215 3030 69.250

25 1250 2500 69.250

25 1500 2500 70.000

25 1500 3000 66.500

26 1500 3000 72.280

30 10U0 2000 79.800

30 1010 4100 79.800

30 1020 2020 83.100

30 1200 1750 84.000

30 1250 2500 84.000

30 1490 3000 83.400

30 1500 3000 79.800

30 2020 3500 79.800

32 12U0 2000 88.640

32 1250 2500 89.600

33.8 1020 2020 93.626

3.5 1500 3000 98.000

s a b KG/sqm

40 1000 2000 106.400

40 1020 2020 110.800

40 1200 2000 110.800

40 1200 2500 112.000

40 1250 2500 112.000

40 1250 2520 110.800

40 1270 2520 112.000

40 150D 3000 111.200

42 1000 2000 116.760

45 950 1870 126.000

45 1020 2020 125.100

45 1250 2500 126.000

45 1440 2900 126.000

50 1000 2000 133.000

50 1020 2020 138.500

50 1200 2500 138.500

50 1250 2500 140.000

50 1500 2500 138.500

50 1500 3000 139.000

52 1020 2020 144.560

55 1500 3000 152.900

60 1000 2000 168.000

60 1020 2020 162.000

60 1500 3000 166.200

60 1520 3020 168.000

63 lODO 2000 176.400

63 1200 2500 174.510

63 1500 2500 176.400

70 375 3000 194.600

70 850 2200 196.000

70 1000 2000 194.600

70 1020 2020 186.200

70 1400 2100 193.900

70 1500 3000 186.200

77 1500 3000 214.060

80 1000 2000 221.600

80 1020 2020 212.800

80 1200 2500 224.000

80 1250 2500 224.000

80 1500 3000 222.400

85 750 2200 238.000

85 1500 3000 236.300

90 1000 2000 252.000

90 1205 3200 250.200

90 1500 3000 239.400

100 1000 2000 266.000

100 1020 2020 280.000

100 1200 2500 277.000

100 1300 2300 277.000

100 1500 3000 278.000

105 1265 3000 291.900

110 1000 2000 292.600

110 1500 3000 305.800

120 1000 2000 333.600

120 1110 3000 333.600

120 1180 2020 333.600

120 1250 2500 336.000

120 1500 3000 332.400

125 1060 3000 347.500

130 1000 2000 364.000


s a b KG/sqm130 1020 2020 345.800130 1020 3000 361.400140 560 1200 378.000140 945 3000 389.200140 1020 2020 389.200140 1020 3000 389.200145 1000 2000 391.500150 900 2020 417.000150 1020 2020 417.000150 1020 3000 417.000150 1500 3000 399.00015B 1020 2020 420.280160 855 2020 444.800160 1020 2020 444.800170 1010 2020 472.600180 1000 2000 478.800180 1020 2020 500.400190 1020 2020 528.200200 1D20 2020 556.000210 1020 2020 558.600220 1020 2020 611.600250 1020 2020 695.000300 1020 2020 834.000

Aluminium sheets/plates/Flat bars

Aluminium sheets/plates

Aluminium flat bar

Aluminium tread plate

Aluminium tread plate

s1 s2 a b KG/sqm2.5 4 1000 2000 6.6502.5 9 1250 2500 6.6502.5 4 1500 3000 6.6503.5 5 1000 2000 9.3103.5 5 1500 3000 9.3104 5.5 1000 4000 10.6405 6.5 1000 2000 13.3005 6.5 1250 2500 13.3005 6.5 1500 3000 13.3005 7 1500 3000 13.5008 9.5 1500 3000 21.280

s1 s2 a b KG/sqm2.5 4 1250 2500 6.6502.5 4 1500 3000 6.6505 6.5 1770 3300 13.500

a

b

a b KG/MTR10 2 0,05410 3 0,08310 4 0,10810 5 0,13310 6 0,16010 7 0,20010 8 0,21612 3 0,09712 5 0,16215 2 0,08115 3 0,12215 4 0,16215 5 0,20315 6 0,23915 8 0,32415 10 0,40519,05 6,35 0,33520 2 0,10820 3 0,16220 4 0,21620 5 0,27720 6 0,32420 8 0,43220 10 0,54020 12 0,64820 15 0,83124 10 0,63425 2 0,13525 3 0,20325 4 0,26425 5 0,33825 6 0,40525 8 0,54025 10 0,69325 12 0,81025 15 1,01325 20 1,35030 2 0,16230 3 0,24930 4 0,31930 5 0,40530 6 0,49930 8 0,63830 10 0,810

30 12 0,97230 15 1,21530 20 1,62035 2 0,18935 3 0,29135 4 0,37835 5 0,47335 6 0,56735 8 0,75635 10 0,94540 2 0,21340 3 0,31940 4 0,43240 5 0,54040 6 0,64840 8 0,86440 10 1,08040 12 1,29640 15 1,62040 20 2,16040 25 2,70040 30 3,24045 12 1,45850 2 0,27050 3 0,39950 4 0,54050 5 0,67550 6 0,81050 8 1,08050 10 1,35050 12 1,62050 15 2,02550 20 2,70050 25 3,46350 30 4,05060 3 0,48660 4 0,66560 5 0,81060 6 0,97260 8 1,27760 10 1,62060 15 2,49360 20 3,38460 25 4,23060 30 5,130

a b KG/MTR60 40 6.84060 45 7.29065 5 0.87870 5 0.93170 10 1.89070 15 2.83570 20 3.78070 30 5.98575 3 0.60875 9 1.79675 20 4.05080 5 1.08080 6 1.33080 10 2.16080 15 3.24080 20 4.43280 25 5.70080 30 6.48080 40 8.64080 50 11.08085 30 6.88590 5 1.21590 10 2.43090 60 14.580100 4 1.080100 5 1.350100 6 1.620100 8 2.160100 10 2.700


Aluminium round bars, square bars, hexagon bars

sw KG/MTR5 0.0586 0.0847 0.11510 0.24712 0.35513 0.40714 0.48417 0.71319 0.89122 1.19424 1.42127 1.79930 2.18232 2.52736 3.19850 5.84565 9.878100 23.400

a a KG/MTR5 5 0.0696 6 0.0978 8 0.17310 10 0.27012 12 0.38914 14 0.54315 15 0.60816 16 0.69118 18 0.87520 20 1.12824 24 1.55525 25 1.78130 30 2.56535 35 3.30840 40 4.56045 45 5.46850 50 7.12555 55 8.16860 60 10.26065 65 12.04170 70 13.96580 80 18.240100 100 28.200110 110 32.670120 120 38.880130 130 45.630140 140 52.920150 150 64.125180 180 87.480200 200 108.000

d KG/MTR

1 0.002

2 0.008

2.5 0.014

3 0.020

4 0.035

5 0.053

6 0.075

7 0.107

7.5 0.119

8 0.133

9 0.172

10 0.220

11 0.256

12 0.317

14 0.426

15 0.495

16 0.563

18 0.705

20 0.879

21 0.987

22 1.052

24 1.221

25 1.359

26 1.486

27 1.545

28 1.637

30 1.908

31 2.037

32 2.251

35 2.741

36 2.818

38 3.140

40 3.517

45 4.197

46 4.651

50 5.495

55 6.601

56 6.893

60 7.828

62 8.147

63 8.724

64 8.907

65 9.187

70 10.655

75 12.231

80 14.067

82 14.040

85 15.710

90 17.804

95 19.632

100 21.980

110 26.996

120 31.651

d KG/MTR

125 33.976

130 36.748

140 42.619

145 44.562

150 49.455

153 48.880

155 52.807

160 56.269

170 63.522

175 64.910

180 71.215

185 72.540

190 78.781

195 80.594

200 86.978

210 95.893

220 108.283

230 117.105

240 125.700

245 127.223

248 137.600

250 135.903

260 147.523

270 152.222

280 170.477

290 184.852

295 194.697

298 184.037

300 196.407

310 200.666

314 208.97b

320 223.468

330 227.394

340 241.384

350 267.332

360 270.618

370 285.861380 301.522400 334.096420 368.341430 386.090440 404.256450 422.840460 441.842470 461.261480 481.098490 501.353500 522.025510 543.115520 564.622530 586.547540 608.890560 654.828630 828.767

Aluminium round bar Aluminium square bar

Aluminium hexagon bar


Bronze Bushings - Sizes and weights

mm kg/m21 x 9 2,5326 x 9 4,20

14 3,3931 x 14 5,40

19 4,23

36 x 14 7,7619 6,6024 5,08

41 x 14 10,4819 9,3124 7,8029 5,92

46 x 14 13,5619 12,3924 10,8729 9,0034 6,78

51 x 19 15,8224 14,3029 12,4234 10,2039 7,62

56 x 19 19,6024 18,0729 16,2034 13,9839 11,40

61 x 24 22,2029 20,3434 18,1139 15,5344 12,60

66 x 24 26,6929 24,8234 22,6039 20,0244 17,0949 13,80

71 x 24 31,5329 29,6634 27,4339 24,8244 21,9349 18,6454 15,01

76 x 24 36,7329 34,8534 32,6339 30,0544 27,1249 23,8454 20,1959 16,20

mm kg/m81 x 29 40,40

34 38,1739 35,5944 32,6749 29,3854 25,7459 21,75

86 x 29 46,3034 44,0839 41,5044 38,5749 35,2854 31,6459 27,6464 23,30

91 x 29 52,5534 50,3339 47,7444 44,8249 41,5354 37,9059 33,9064 29,5569 24,85

96 x 29 59,1634 56,9339 54,3544 51,4149 48,1454 44,4959 40,5064 36,1669 31,4674 26,42

101 x 39 61,3144 58,3849 55,0954 51,4659 47,4764 43,1269 38,4274 33,3779 27,97

101 x 39 68,6244 65,6949 62,4154 58,7659 54,7864 50,4369 45,7374 40,6979 35,28

mm kg/m111 x 39 76,28

44 73,3549 70,0754 66,4359 62,4464 58,0969 53,4074 48,3579 42,94

116 x 44 81,7949 78,4954 74,8359 70,8264 66,4569 61,7374 56,6579 51,2284 45,4489 39,29

121 x 54 83,2459 79,2364 74,8669 70,1474 65,0779 59,6484 53,8589 47,7194 41,2199 34,36

126 x 59 88,0064 83,6369 78,9174 73,8479 68,4084 62,6289 56,4894 49,9899 43,13104 35,92

141 x 59 97,1269 88,0479 77,5389 65,6099 52,25109 37,48

131 x 59 116,4469 107,3579 96,8489 84,9199 71,56109 56,80119 40,61

mm kg/m150 x 60 133,51

70 124,3380 113,7390 101,72100 88,30110 73,46120 57,21130 39,55

160 x 70 146,2380 135,6290 123,61100 110,19110 95,36120 79,11130 61,45140 42,38

170 x 70 169,5480 158,9390 146,82100 133,51110 118,67120 102,43130 84,77140 65,69160 45,20

180 x 80 183,6690 171,65100 158,22110 143,38120 127,15130 109,49140 90,41150 69,93160 48,02

190 x 80 209,8090 197,79100 184,37110 169,52120 153,28130 135,63140 116,56150 96,06160 74,17170 50,86

200 x 90 225,35100 212,35110 197,08120 180,85130 163,19140 144,10150 123,62160 101,72170 78,40180 53,68

mm kg/m250 x 100 370,88

110 356,03120 339,80130 322,14140 303,05150 282,57160 260,67170 237,35180 212,63190 187,44200 158,94

300 x 120 534,07130 516,41140 497,33150 476,84160 454,94170 431,62180 406,90190 382,69200 353,22210 325,89220 295,36230 263,41240 230,04250 194,27

350 x 150 706,53160 684,63170 661,22180 636,60190 610,46200 582,81210 553,94220 523,56230 491,77240 458,57250 423,86260 387,87270 350,43280 311,57290 271,30300 229,59

350 x 200 847,72210 818,90220 788,52230 756,73240 723,53250 688,77260 652,82270 615,38280 576,52290 536,25300 494,50310 451,48320 406,96330 361,03340 313,69350 264,91


Bronze Hollow Bars - Sizes and weights

mm kg/m

21 x 9 2,53

26 x 9 4,2014 3,39

31 x 14 5,4019 4,23

36 x 14 7,7619 6,6024 5,08

41 x 14 10,4819 9,3124 7,8029 5,92

46 x 14 13,5619 12,3924 10,8729 9,0034 6,78

51 x 19 15,8224 14,3029 12,4234 10,2039 7,62

56 x 19 19,6024 18,0729 16,2034 13,9839 11,40

61 x 24 22,2029 20,3434 18,1139 15,5344 12,60

66 x 24 26,6929 24,8234 22,6039 20,0244 17,0949 13,80

71 x 24 31,5329 29,6634 27,4339 24,8244 21,9349 18,6454 15,01

76 x 24 36,7329 34,8534 32,6339 30,0544 27,1249 23,8454 20,1959 16,20

mm kg/m

81 x 29 40,4034 38,1739 35,5944 32,6749 29,3854 25,7459 21,75

86 x 29 46,3034 44,0839 41,5044 38,5749 35,2854 31,6459 27,6464 23,30

91 x 29 52,5534 50,3339 47,7444 44,8249 41,5354 37,9059 33,9064 29,5569 24,85

96 x 29 59,1634 56,9339 54,3544 51,4149 48,1454 44,4959 40,5064 36,1669 31,4674 26,42

101 x 39 61,3144 58,3849 55,0954 51,4659 47,4764 43,1269 38,4274 33,3779 27,97

101 x 39 68,6244 65,6949 62,4154 58,7659 54,7864 50,4369 45,7374 40,6979 35,28

mm kg/m

111 x 39 76,2844 73,3549 70,0754 66,4359 62,4464 58,0969 53,4074 48,3579 42,94

116 x 44 81,7949 78,4954 74,8359 70,8264 66,4569 61,7374 56,6579 51,2284 45,4489 39,29

121 x 54 83,2459 79,2364 74,8669 70,1474 65,0779 59,6484 53,8589 47,7194 41,2199 34,36

126 x 59 88,0064 83,6369 78,9174 73,8479 68,4084 62,6289 56,4894 49,9899 43,13

104 35,92

141 x 59 97,1269 88,0479 77,5389 65,6099 52,25

109 37,48

131 x 59 116,4469 107,3579 96,8489 84,9199 71,56

109 56,80119 40,61

mm kg/m

150 x 60 133,5170 124,3380 113,7390 101,72

100 88,30110 73,46120 57,21130 39,55

160 x 70 146,2380 135,6290 123,61

100 110,19110 95,36120 79,11130 61,45140 42,38

170 x 70 169,5480 158,9390 146,82

100 133,51110 118,67120 102,43130 84,77140 65,69160 45,20

180 x 80 183,6690 171,65

100 158,22110 143,38120 127,15130 109,49140 90,41150 69,93160 48,02

190 x 80 209,8090 197,79

100 184,37110 169,52120 153,28130 135,63140 116,56150 96,06160 74,17170 50,86

200 x 90 225,35100 212,35110 197,08120 180,85130 163,19140 144,10150 123,62160 101,72170 78,40180 53,68

mm kg/m

250 x 100 370,88110 356,03120 339,80130 322,14140 303,05150 282,57160 260,67170 237,35180 212,63190 187,44200 158,94

300 x 120 534,07130 516,41140 497,33150 476,84160 454,94170 431,62180 406,90190 382,69200 353,22210 325,89220 295,36230 263,41240 230,04250 194,27

350 x 150 706,53160 684,63170 661,22180 636,60190 610,46200 582,81210 553,94220 523,56230 491,77240 458,57250 423,86260 387,87270 350,43280 311,57290 271,30300 229,59

350 x 200 847,72210 818,90220 788,52230 756,73240 723,53250 688,77260 652,82270 615,38280 576,52290 536,25300 494,50310 451,48320 406,96330 361,03340 313,69350 264,91


Bushings, rough-turned, electric spin casting

Flat bars - electric continuous casting

Square bars - electric continuous casting

162x58 160 x60 156,468 70 147,878 80 137,888 1) 2) 90 126,498 1) 2) 100 113,7108 1) 2) 110 99,6118 1) 2) 120 84,2128 130 67,4138 140 49,2172 x 88 170 x 90 149,298 100 136,5108 110 122,5118 120 107,0128 130 90,2138 140 72,0148 150 52,5

182 x 98 180 x 100 160,7118 120 131,2128 130 114,4138 140 96,2148 150 76,7158 160 55,8192 x 108 190 x 110 172,2148 150 102,2158 160 81,3202 x 98 200 x 100 213,2118 120 183,7138 140 148,7158 160 108,2212 x 178 210 x 180 92,7222 x 98 220 x 100 271,2118 120 241,6

222 x 158 220 x 160 166,2178 180 120,3232 x 138 230 x 140 237,6178 180 186,1242 x 118 240 x 120 305158 160 229,6252 x 158 250 x 160 284,2178 180 217,4262 x 178 260 x 180 252,5188 190 227,5272 x 208 270 x 210 210282 x 218 280 x 220 218,7233 235 172,4248 250 123,1302 x 218 300 x 220 298,5312 x 208 310 x 210 369,5

Liefermaß für Fertigmaß Gewichtmm Ø mm Ø kg/m



52 x 12 50 x 10 5,614 12 6,518 16 8,322 20 10,262 x 12 60 x 10 6,614 12 7,718 16 1022 20 12,267 x 12 65 x 10 7,214 12 8,418 16 10,722 20 13,132 30 19,1

73 x 13 70 x 10 8,515 12 9,719 16 12,323 20 1583 x 13 80 x 10 9,615 12 11,119 16 1423 20 17103 x 13 100 x 10 11,915 12 13,819 16 17,423 20 21,4123 x 19 120 x 16 20,8

123 x 19 120 x 20 25,2143 x 19 140 x 16 24,223 20 29,2163 x 19 160 x 16 27,623 20 33,4183 x 19 180 x 16 3123 20 37,4203 x 19 200 x 16 34,423 20 41,5310 x 45 300 x 40 124,255 50 151,7

u.s.w.




32 x 32* 30 x 30 9,142 x 42* 40 x 40 15,752 x 52* 50 x 50 24

62 x 62* 60 x 60 34,272 x 72* 70 x 70 47,582 x 82* 80 x 80 60,2

92 x 92* 90 x 90 75,8102 x 102* 100 x 100 93112 x 112* 110 x 110 115,0





Forged Steel Flanges to ASA B 16.5*approximate unit weights in kgs 11)

1) lbs = kg x 2,2Weights specified in this table refer to raised face flanges. Flanges are also produced with other facings.

* Subject to sufficient manufacturing quantities, we produce these products in nearly every alloy mentioned in this catalogue.

NWNB Welding Neck Slip-on Blind

150 lb. 300 lb. 600 lb. 900 lb. 1500 lb. 150 lb. 300 lb. 600 lb. 900 lb. 1500 lb. 150 lb. 300 lb. 600 lb. 900 lb. 1500 lb.

1/2” 0,8 1,0 1,4 2,2 2,2 0,8 1,2 1,3 3,2 3,2 0,8 1,0 1,0 1,8 1,83/4” 1,0 1,4 1,8 3,2 3,2 0,9 1,3 1,4 3,6 3,6 0,9 1,4 1,4 2,7 2,7

1” 1,1 1,8 2,3 4,1 4,1 1,0 1,4 1,8 4,1 4,1 1,0 1,8 1,8 4,1 4,111/4” 1,4 2,7 3,2 4,5 4,5 1,3 1,8 2,7 4,5 4,5 1,3 2,7 2,7 4,5 4,511/2” 1,8 3,6 4,5 6,4 6,4 1,4 2,7 3,2 6,4 6,4 1,4 3,2 3,6 6,4 6,4

2” 2,7 4,1 5,4 11,3 11,3 2,3 3,2 4,1 11,3 11,3 1,8 3,6 4,5 11,3 11,321/2” 3,6 5,4 8,2 16,3 16,3 3,2 4,5 5,9 16,3 16,3 3,2 5,4 6,8 15,9 15,9

3 4,5 6,8 10,4 14,5 21,8 3,6 5,9 7,3 14,1 21,8 4,1 7,3 9,1 14,5 21,831/2” 5,4 8,2 11,8 5,0 7,7 9,5 5,9 9,5 13,2

4” 6,8 11,3 19,1 23,2 33,0 5,9 10,0 16,8 24,1 33,0 7,7 12,2 18,6 24,5 33,05” 8,6 14,5 30,9 39,0 60,0 6,8 12,7 28,6 38,0 60,0 9,1 15,9 30,9 39,0 64,06” 10,9 19,0 37,0 50,0 74,0 8,6 17,7 36,0 49,0 74,0 11,8 22,7 39,0 51,0 72,08” 17,7 30,5 53,0 85,0 124,0 13,6 26,3 52,0 78,0 117,0 20,4 37,0 63,0 89,0 137,0

10” 23,6 41,5 86,0 122,0 206,0 19,5 36,8 80,0 111,0 198,0 31,8 58,0 105,0 132,0 230,012” 36,3 62,5 103,0 169,0 313,0 29,1 52,0 98,0 148,0 303,0 50,0 84,0 134,0 188,0 352,014” 46,3 84,5 158,0 255,0 38,6 74,0 118,0 173,0 60,0 107,0 172,0 224,0 461,016” 57,7 115,5 218,0 311,0 42,2 100,0 166,0 208,0 77,0 139,0 233,0 281,0 613,018” 63,6 138,0 252,0 419,0 54,5 127,0 216,0 294,0 95,0 177,0 302,0 400,0 835,020” 77,2 172,0 313,0 528,0 70,0 148,0 278,0 360,0 123,0 223,0 388,0 503,0 1062,022” 102 195,0 281,0 72,0 197,0 292,0 151,0 270,0 437,024” 118 247,0 444,0 957,0 95,0 222,0 398,0 672,0 187,0 342,0 533,0 953,0 1712,0

NWNB Lap Joint Socket Welding Threaded

150 lb. 300 lb. 600 lb. 900 lb. 1500 lb. 150 lb. 300 lb. 600 lb. 900 lb. 1500 lb. 150 lb. 300 lb. 600 lb. 900 lb. 1500 lb.

1/2” 0,8 1,2 1,3 3,2 3,2 0,8 1,2 1,3 0,8 1,2 1,3 3,2 3,23/4” 0,9 1,3 1,4 3,6 3,6 0,9 1,3 1,4 0,9 1,3 1,4 3,6 3,6

1” 1,0 1,4 1,8 4,1 4,1 1,0 1,4 1,8 1,0 1,4 1,8 4,1 4,1 11/4” 1,3 1,8 2,7 4,5 4,5 1,3 1,8 2,7 1,3 1,8 2,7 4,5 4,5 11/2” 1,4 2,7 3,2 6,4 6,4 1,4 2,7 3,2 1,4 2,7 3,2 6,4 6,4

2” 2,3 3,2 4,1 11,3 11,3 2,3 3,2 4,1 2,3 3,2 4,1 11,3 11,321/2” 3,2 4,5 5,4 15,9 15,9 3,2 4,5 5,9 3,2 4,5 5,9 16,3 16,3

3 3,6 5,9 6,8 13,6 21,3 3,6 5,9 7,3 3,6 5,9 7,3 14,1 21,831/2” 5,0 7,7 9,1 5,0 7,7 9,5 5,0 7,7 9,5

4” 5,9 10,0 16,3 23,2 34,0 5,9 10,0 5,9 10,0 16,8 24,1 33,05” 6,8 12,7 27,7 37,0 63,0 6,8 6,8 12,7 28,6 38,0 60,06” 8,6 17,7 35,0 48,0 77,0 8,6 8,6 17,7 36,0 49,0 74,08” 13,6 26,3 51,0 85,0 130,0 13,6 13,6 26,3 52,0 78,0 117,0

10” 19,5 41,0 89,0 126,0 220,0 19,5 19,5 36,8 80,0 111,0 198,012” 29,0 63,0 109,0 168,0 340,0 29,1 29,0 52,0 98,0 148,0 303,014” 45,0 86,0 132,0 180,0 39,0 39,0 74,0 118,0 173,016” 58,0 109,0 182,0 222,0 42,0 42,0 100,0 166,0 208,018” 66,0 138,0 213,0 304,0 54,0 54,0 127,0 216,0 294,020” 84,0 170,0 274,0 394,0 70,0 70,0 148,0 278,0 360,022”24” 118,0 241,0 393,0 753,0 95,0 95,0 222,0 398,0 672,0


Piping Fittings and Flange Materials

Material ASTM Specifications

Number Grade Form

Chemistry

Carbon Manganese Silicon Chromium Nickel Moly Other ASTM Specifiedper cent per cent per cent per cent per cent per cent Minimum Minimum

U.T.S. psi Yield psi

Low and Intermediate Alloy Steels

(a) Phosphorus .040 per cent max, Sulfur .040 per cent max.(b) Phosphorus .045 per cent max, Sulfur .045 per cent max.(c) Phosphorus .030 per cent max, Sulfur .030 per cent max.(d) Phosphorus .050 per cent max, Sulfur .050 per cent max.(e) Aluminium .04/30, Copper .40/.75.

Carbon Moly

1/2 Cr 1/2 Moly

1 Cr 1/2 Moly

1 Cr 1/2 Moly

1 1/4 Cr 1/2 Moly

1 1/4 Cr 1/2 Moly

2 1/4 Cr 1 Moly

2 1/4 Cr 1 Moly

3 Cr 1 Moly

5 Cr 1/2 Moly

5 Cr 1/2 Moly

7 Cr 1/2 Moly

7 Cr 1/2 Moly

9 Cr 1 Moly

9 Cr 1 Moly

3 1/2 Nickel

3 1/2 Nickel

5 Nickel

Cr Cu Ni

Cr Cu Ni

A 182

A 335

A 234

A 335

A 234A 335

A 182

A 234A 335

A 182

A 234A 335

A 182

A 335

A 234A 335

A 182

A 335

A 182

A 335

A 182

A 420A 333

A 350

A 420A 333

A 420A 333

A 350

F 1

P 1

WP 1

P 2

WP 12P 12

F 12

WP 11P 11

F 11

WP 22P 22

F 22

P 21

WP 5P 5

F 5

P 7

F 7

P 9

F 9

WPL 3/33

LF 3

WPL 55

WPL 44

LF 4

Flanges

Pipe

Fittings

Pipe

FittingsPipe

Flanges

FittingsPipe

Flanges

FittingsPipe

Flanges

Pipe

FittingsPipe

Flanges

Pipe

Flanges

Pipe

Flanges

FittingsPipe

Flanges

FittingsPipe

FittingsPipe

Flanges

.20/.30

.10/.20

.10/.20

.15 Max

.10/.20

.15 Max

.10/.20

. 15 Max

. 15 Max

. 15 Max

. 15 Max

. 15 Max

. 15 Max

. 15 Max

. 15 Max

. 15 Max

.19 Max

.20 Max

.19 Max

.12 Max

.12 Max

.60/.90

.30/.80

.30/.61

.30/.61

.30/.80

.30/.60

.30/.80

.30/.60

.30/.60

.30/.60

.30/.60

.30/.60

.30/.60

.30/.60

.30/.60

.30/.60

.31/.64

.30/.60

.20/.64

.50/1.05

.55/1.00

.20/.35

.10/.50

.10/.30

.50 Max

.10/.60

.50/1.00

.50/1.00

.50 Max

.50 Max

.50 Max

.50 Max

.50 Max

.50/1.00

.50/1.00

.25/1.00

.50/1.00

.18/.37

.15/.35

.18/.37

.08/.37

.10/.35

.50/.81

.80/1.25

.85/1.20

1.0/1.5

1.0/1.5

1.90/2.60

2.00/2.50

2.65/3.35

4.00/6.00

4.00/6.00

6.00/8.00

6.00/8.00

8.00/10.00

8.00/10.00

.44/1.01

.50/.95

.50 Max

3.18/3.82

3.25/3.75

4.68/5.32

.47/.98

.50/.95

.40/.60

.44/.65

.44/.65

.44/.65

.45/.65

.44/.65

.45/.65

.87/1.13

.90/1.10

.80/1.06

.45/.65

.45/65

.44/.65

.45/.65

.90/1.10

.90/1.10

a

b

b

b

a

c

a

c

a

c

c

c

c

c

c

c

d

a

d

a, e

a, e

70,000

55,000

55,000

60,000

70,000

60,000

70,000

60,000

70,000

60,000

60,000

60,000

60,000

60,000

60,000

100,000

65,000

70,000

65,000

60,000

60,000

40,000

30,000

30,000

30,000

40,000

30,000

40,000

30,000

40,000

30,000

30,000

30,000

30,000

36,000

30,000

70,000

35,000

40,000

35,000

30,000

30,000

Covers Manufactured Fittings - For chemistries other specifications apply


Stainless SteelsPPipe, Fittings and Flange Materials

Aluminium and Aluminium Alloys

304H, 316H, 321G, 347H and 348H Grades are available differing from the regular grades in that the carbon content is 0.04 to 0.10 and that the Columbium, Tantalum and/or Titanium limits for 321H,347H and 348H are modified and required to be solution heat treated.(f) Phosphorus .040 per cent max, Sulfur .030 per cent max.(g) Titanium content shall be not less than five times the carbon content and not more than 0.60 per cent.(h) Phosphorus .035 per cent max, Sulfur .030 per cent max.(i) Columbium plus Tantalum content shall not be less than ten times the carbon content and not more than 1.00 per cent.(j) Tantalum 0.10 per cent max.

†1 = Pipe, 2 = Tube, 3 = Plate, 4 = Bar and 5 = Forging.(a) Alloys 1160, 1260, and 1360 also are available.(b) Alloys 5652 and 5254 also are available.(c) Alloys 6053 and 6363 also are available.

Material

Types ofAluminium

Pure (a) 1060 2, 3, 4 99.6 Min .05 .35 .25 .03 .03 .05 ... .03 .03 ... 10,000 4,000 9,500 2,5001100 3, 4, 5 99.0 Min. .20 (1.0 Total) .05 ... .10 ... ... .05 .15 12,000 5,000 11,000 3,500

Manganese Alloy 3003 1, 2, 3, 4, 5 Remainder .20 .7 .6 1.0/1.5 ... .10 ... ... .05 .15 14,500 6,000 14,000 5,000

Magnesium 5052 2, 3, 4 Remainder .10 (.45 Total) .10 2.2/2.8 .20 .15/.35 ... .05 .15 25,000 9,500 25,000 9,500Alloys (b) 5154 2, 3, 4 Remainder .10 (.45 Total) .10 3.1/3.9 .20 .15/.35 .20 .05 .15 30,000 11,000 30,000 11,000

Magnesium 6061 1, 2, 3, 4, 5 Remainder .15/.40 .7 .40/.8 .15 .8/1.2 .25 .15/.35 ... .05 .15 38,000 35,000 24,000 ...Silicon 6062 1, 2, 4 Remainder .15/.40 .7 .40/.8 .15 .8/1.2 .25 .04/.14 .15 .05 .15 ... ... ... ...

Alloys (c) 6063 1, 2, 4 Remainder .10 .35 .20/.6 .10 .45/0.9 .10 .10 .10 .05 .15 30,000 25,000 17,000 ...

Alloy Forms available†

Chemical composition, per cent Alu- Copper Iron Sil- Manga- Mag- Zinc Chro- Tita- Others

minium icon nese nesium mium nium each total

ASME* Minimum Strengths, psiUnwelded Welded

U.T.S Yield U.T.S. Yield

ASTM Specifications

Number Grade Form

Chemistry

Max. Carbon Manganese Silicon Chromium Nickel Moly Other ASTM Specifiedper cent per cent per cent per cent per cent per cent Minimum Minimum

18-8 Cr Ni Type 304*

18-8 Cr Ni Type 304L

25-R Cr Ni Type 309

25-20 Cr Ni Type 310

18-8 Moly Type 316*

18-8 Moly Type 316L

19-9 Moly Type 317

18-8 Moly Type 321*

18-8 Cb Type 347*

18-8 Cb Type 348*

12 Cr Type 410

17 Cr Type 430

A 182 F 304 Flanges .08 2.0 Max 1.00 Max 18.0/20.0 8.0/11.0 f 75,000 30,000A 312 TP 304 Pipe .08 2.0 Max .75 Max 18.0/20.0 8.0/11.0 f 75,000** 30,000A 403 WP 304 Fittings Covers Manufactured Fittings - For chemistries other specifications apply

A 403 WP 310 Fittings .15 2.0 Max .75 Max 24.0/26.0 19.0/22.0 f 75,000 30,000A 312 TP 310 PipeA 182 F 310 Flanges .15 2.0 Max 1.00 Max 24.0/26.0 19.0/22.0 f 75,000 30,000A 403 WP 316 Fittings .08 2.0 Max .75 Max 16.0/18.0 11.0/14.0 2.0/3.0 f 75,000 30,000A 312 TP 316 PipeA 182 F 316 Flanges .08 2.0 Max 1.00 Max 16.0/18.0 10.0/14.0 2.0/3.0 f 75,000 30,000A 403 WP 316L Fittings .035 2.0 Max .75 Max 16.0/18.0 10.0/15.0 2.0/3.0 f 70,000 25,000A 312 TP 316L PipeA 182 F 316L Flanges .035 2.0 Max 1.00 Max 16.0/18.0 10.0/15.0 2.0/3.0 f 65,000 25,000

A 403 WP 321 Fittings .08 2.0 Max .75 Max 17.0/20.0 9.0/13.0 f, g 75,000 30,000A 312 TP 321 PipeA 182 F 321 Flanges .08 2.5 Max .85 Max 17.0 Min. 9.0 Min. g, h 75,000 30,000A 403 WP 347 Fittings .08 2.0 Max .75 Max 17.0/20.0 9.0/13.0 f, i 75,000 30,000A 312 TP 347 PipeA 182 F 347 Flanges .08 2.0 Max 1.00 Max 17.0/20.0 9.0/13.0 c, i 75,000 30,000A 403 WP 348 Fittings .08 2.0 Max .75 Max 17.0/20.0 9.0/13.0 f, i, j 75,000 30,000A 312 TP 348 PipeA 182 F 348 Flanges .08 2.0 Max 1.00 Max 17.0/20.0 9.0/13.0 c, i, j 75,000 30,000

A 403 WP 317 FittingsA 312 TP 317 Pipe .08 2.0 Max .75 Max 18.0/20.0 11.0/14.0 3.0/4.0 f 75,000 30,000

A 268 TP 410 Tubing .15 1.0 Max .75 Max 11.5/13.5 .50 Max f 60,000 30,000A 182 F 6 Flanges .12 1.0 Max 1.00 Max 11.5/13.5 .50 Max f 85,000 55,000

A 268 TP 430 Tubing .12 1.0 Max .75 Max 14.0/18.0 .50 Max f 60,000 35,000

A 403 WP 309 Fittings.15 2.0 Max .75 Max 22.0/24.0 12.0/15.0 f 75,000 30,000A 312 TP 309 Pipe

A 403 WP 304L FittingsA 312 TP 304L Pipe

.035 2.0 Max .75 Max 18.0/20.0 8.0/13.0 f 70,000 25,000

A 182 F 304L Flanges .035 2.0 Max 1.00 Max 18.0/20.0 8.0/13.0 f 65,000 25,000

Non-Heat-Treatable aluminium Alloys

Heat-Treatable Aluminium Alloys


Steel for Flanges, Pipes and Fittings to ASTM-Standards

Specifica ASTM

DesignationASTM

Tensile strenght

lbs/ kg/sq.in. mm2

min. mind.

Yield point

lbs/ kg/sq.in. mm2

min. mind.

Analyse in %

C Mn Si P S Cr Ni Mo

A 105

Grade I max.0,35 max.0,90 max.0,35 max.0,05 max.0,05 60000 42,2 30000 21,1

Grade II max.0,35 max.0,90 max.0,35 max.0,05 max.0,05 70000 49,2 36000 25,3

A 106 for High-Temperature 5ervice Grade A

max.0,25 0,27-0,93 min.0,10 max.0,048 max.0,058 48000 33,7 30000 21,1

Grade B max.0,30 0,29-1,06 min.0,10 max.0,048 max.0,058 60000 42,2 35000 24,6

A 181 for General Service

Grade I max.0,35 max.0,90 max.0,35 max.0,055 max.0,055 60000 42,2 30000 21,1

Grade II max.0,35 max.0,90 max.0,35 max.0,055 max.0,055 70000 49,2 36000 25,3

A 182 for High-Temperature Service Grade F 1

0,20-0,30 0,60-0,80 0,20-0,35 max.0,04 max.0,04 - - 0,40-0,60 70000 49,2 40000 28,1

Grade F 5 max.0,15 0,30-0,60 max.0,50 max.0,03 max.0,03 4,00-ó,00 max.0,50 0,45-0,65 60000 42,2 36000 25,3

Grade F 5a max.0,25 max.0,60 max.0,50 max.0,Q4 max.0,03 4,00-6,00 max.0,50 0,45-0,65 90000 63,3 65000 45,7

Grade F 6 max.0,12 max.1,00 max.1,00 max.0,04 max.0,03 11,50-13,50 max.0,50 - 85000 59,8 55000 38,7

Grade F 9 max.0,15 0,30-0,60 0,50-1,00 max.0,03 max.0,03 8,00-10,00 - 0,90-1,10 100000 70,3 70000 49,2

Grade F 11 0,10-0,20 0,30-0,80 0,50-1,00 max.0,04 max.0,04 1,00-1,50 - 0,45-0,65 70000 49,2 40000 28,1

Grade F 12 0,10-0,20 0,30-0,80 0,10-0,60 max.0,04 max.0,04 0,85-1,20 - 0,45-0,65 70000 49,2 40000 28,1

Grade F 22 max.0,15 0,30-0,60 max.0,50 max.0,04 max.0,04 2,00-2,50 - 0,90-1,10 70000 49,2 40000 28,1

Grade F 304 max.0,08 max.2,00 max.1,00 max.0,04 max.0,03 18,00-20,00 8,00-11,00 - 75000 52,7 30000 21,1


Grade F 316 max.0,08 max.2,00 max.1,00 max.0,04 max.0,03 16,00-18,00 10,00-14,00 2,00-3,00 75000 52,7 30000 21,1

Grade F 321 max.0,08 max.2,50 max.0.85 max. 0,035 max.0,03 min.17,00 min.9,00 - 75000 52,7 30000 21,1

Grade F 10 0,10-0,20 0,50-0,80 1,00-1,40 max. 0,03 max.0,03 7,00-9,00 19,00-22,00 - 80000 56,2 30000 21,1


A 335 f0r High-Temperature Service Grade P 2

0,10-0,20 0,30-0,61 0,10-0,30 rnax.0,045 max.0,045 0,50-0,81 - 0,44-0,65 55000 38,7 30000 21,1

Grade P 3b max.0,15 0,30-0,60 max.0,50 max.0,03 max.0,03 1,65-2,35 - 0,44-0,65 60000 42,2 30000 21,1

Grade P 5b max.0,15 0,30-0,60 1,00-2,00 max.0,03 max.0,03 4,00-6,00 - 0,45-0,65 60000 42,2 30000 21,1

Grade P 11 max.0,15 0,30-0,60 0,50-1,00 max.0,03 max.0,03 1,00-1,50 - 0,44-0,65 60000 42,2 30000 21,1

Grade P 11 max.0,15 0,30-0,60 max.0,50 max.0,03 max.0,03 2,65-3,35 - 0,80-1,06 60000 42,2 30000 21,1

A 350 for Low-Temperature Service

Grade LF 1 max.0,30 max.1,06 - max.0,04 max.0,05 - - - 60000 42,2 30000 21,1

Grade LF 3 max.0,20 0,30-0,60 0,15-0,35 max.0,04 max.0,04 - 3,25-3,75 - 70000 49,2 40000 28,1


Dimensional Tolerances for A.S.A. FlangesAS per ASA B 16,5 and BS 1560

Threaded, Slip-on, Lap Joint and Blind Flanges

OUTSIDE* DIAMETER

* Tolerance for these dimensions not covered by ASA B 16,5.

When O.D. is 24” or less ± 1/16”

When O.D. is over 24” ± 1/8”

Threaded To Standard Gauge Limits

Slip-on and Lap JointSizes 10” and smaller + 1/32”, - 0”

Sizes 12” and larger + 1/16”, - 0”

1/16” Raised Face ± 1/32”

1/4” Raised FaceTongue and Groove, ± 1/64”or Male and Female

Sizes 12” and smaller + 3/32”, - 1/16”

Sizes 14” and larger ± 1/8”

Bolt Circle ± 1/32”

Bolt hole spacing ± 1/64”

Eccentricity ofBolt Circle and Facing 1/32” max(with respect to bore)


Sizes 20” and larger + 3/16”, - 1/16”

Sizes 18” and smaller + 1/8”, - 0”


INSIDEDIAMETER

DIAMETER OF COUNTERBORE

DIAMETER OF CONTACT FACE

OUTSIDE* DIAMETER

OF HUB

*DRILLING

LENGTH THRUHUB

THICKNESS

Same as forInside Diameter

WELDING NECK FLANGES

OUTSIDE* DIAMETER

INSIDEDIAMETER

DIAMETER OF CONTACT FACE

DIAMETER OFHUB AT POINTOF WELDING

DIAMETER* OF HUBAT BASE

DRILLING

LENGTH THRU HUB

THICKNESS

When O.D. is 24” or less ± 1/16”

When O.D. is over 24” ± 1/8”

Sizes 10” and smaller ± 1/32”

Sizes 12” through 18” ± 1/16”

Sizes 20” and larger + 1/8”, - 1/16”

1/16 “ Raised Face

1/4 “ Raised Face ± 1/64”

Tongue and Groove,or Male and Female


Sizes 6” and larger + 5/32”, - 1/32”

Sizes 10” and smaller ± 1/16”

Sizes 12” and larger ± 1/8”

Sizes 18” and smaller + 1/8”, - 0”


When Hub Base is 24” or less ± 1/16”

When Hub Base isover 24” ± 1/8 “

Bolt Circle ± 1/32”

Bolt hole spacing ± 1/64”

Eccentricity ofBolt Circle and Facing 1/32” max(with respect to bore)


To b

e sp

ecifi

ed b

y pu

rcha

ser

To b

e sp

ecifi

ed b

y pu

rcha

ser

Flanges

Nominalpipe size

inches

Outsidediameterof flange

mm

O

Thickness of

flangemin. mm

C

Slip-onSocketweldingmin. mm

B

Lapjoint

min. mmB11

Weldingneck

Socketwelding

B22

Slip-on Blind ThreadedSocketwelding

Lapjoint

Welding neck

Bore Weight in kg

150 LB

1/2 89 11 22,3 22,9 0,4 0,4 0,4 0,7 0,5 0,43/4 98,5 12,5 27,7 28,2 0,7 0,7 0,7 0,9 0,7 0,71 108 14,5 34,5 35 0,8 0,9 0,8 1,1 0,9 0,81,1/4117,5 16 43,2 43,7 1,2 1,2 1,1 1,5 1,3 1,21,1/2127 17,5 49,5 50 1,4 1,5 1,4 1,8 1,6 1,52 152,5 19 62 62,5 2,2 2,3 2,2 2,7 2,6 2,32,1/2178 22 74,7 75,4 3,5 3,7 3,5 4,4 4,1 3,73 190,5 24 90,7 91,4 4,1 4,2 4,1 5,1 5,1 4,13,1/2216 24 103,4 104,1 5,2 5,2 5,2 6,4 6,5 5,14 229 24 116,1 116,8 5,6 5,9 5,6 7,5 7,5 5,95 254 24 143,8 144,5 6,3 7 6,3 9 9,2 76 279 25,5 170,7 171,4 7,8 8,4 7,8 11 11,8 8,48 343 29 221,5 222,2 12,6 12,6 12,6 18,5 20,4 1310 406 30 276,3 277,4 18 18 18 25 31 17,812 483 32 327,1 328,2 27,5 29,5 27,5 38 45 29,514 533 35 359,1 360,2 37 41 37 51 60 3916 597 36,5 410,5 411,2 46 53 46 63 79 4718 635 39,5 461,8 462,3 54 59 50 71 93 5420 698 43 513,1 514,3 72 74 64 88 127 7624 813 47,5 615,9 615,9 95 99 89 120 190 97

Bigger sizes on requests

300 LB

1/2 95,5 14,5 22,3 22,9 0,7 0,7 0,7 0,8 0,7 0,73/4 117,5 16 27,7 28,2 1,2 1,2 1,2 1,4 1,2 1,21 124 17,5 34,5 35 1,4 1,4 1,4 1,7 1,5 1,41,1/4133,5 19 43,2 43,7 1,8 1,9 1,8 2,2 2 1,91,1/2156 20,5 49,5 50 2,7 2,8 2,7 3,2 2,9 2,82 165 22 62 62,5 3,2 3,3 3,2 3,6 3,4 3,32,1/2190,5 25,5 74,7 75,4 4,5 4,6 4,6 5,5 5,3 4,63 210 28,5 90,7 91,4 6,1 6,3 5,9 7,3 7,2 6,33,1/2229 30 103,4 104,1 7,5 7,8 7,5 9 9,2 7,84 254 32 116,1 116,8 10 10 10 11,9 12 10,25 279 35 143,8 144,5 12,5 12,5 16 16 12,96 318 36,5 170,7 171,4 16,2 16,1 20 22 16,88 381 41,5 221,5 222,2 25 25 31 36 2610 444 47,5 276,3 277,4 35 35 44,3 55 37,512 521 51 327,1 328,2 50 62 64 81 5214 584 54 359,1 360,2 72 86 88 108 7216 648 57 410,5 411,2 90 113 112 140 8818 711 60,5 461,8 462,3 115 134 138 178 11520 775 63,5 513,1 514,3 137 167 173 209 14024 914 70 615,9 615,9 210 240 240 350 212


600 LB

1/2 95,5 14,5 22,3 22,9 0,8 1 0,8 0,9 0,8 13/4 117,5 16 27,7 28,2 1,4 1,6 1,4 1,6 1,4 1,61 124 17,5 34,5 35 1,7 1,8 1,7 1,9 1,7 1,81,1/4133,5 20,5 43,2 43,7 2,1 2,6 2,1 2,6 2,4 2,61,1/2156 22 49,5 50 3,1 3,3 3,1 3,5 3,4 3,32 165 25,5 62 62,5 3,8 3,9 3,8 4,7 4,4 3,92,1/2190,5 29 74,7 75,4 5,5 6 5,5 6,7 6,8 63 210 32 90,7 91,4 7,3 7,4 7,3 8,7 8,8 7,43,1/2229 35 103,4 104,1 8,9 9,5 8,9 11,6 12,4 9,54 273 38 116 116,8 15,8 15,8 18,3 18,6 175 330 44,5 143,8 144,5 28,5 27,5 30,5 30,5 28,56 356 47,5 170,7 171,4 36 35,4 37 38 368 419 55,6 221,5 222,2 51 50 55 62 5210 508 63,5 276,3 277,4 76 74 91 102 7612 559 66,5 327,1 328,2 90 89 108 132 9014 603 70 359,1 360,2 102 111 150 158 10216 686 76 410,5 411,2 150 165 180 225 15018 743 82,5 461,8 462,3 180 194 228 285 18020 813 89 513,1 514,3 230 255 285 365 23024 940 101,5 615,9 615,9 330 362 372 532 330


To b

e sp

ecifi

ed b

y pu

rcha

ser


To b

e sp

ecifi

ed b

y pu

rcha

ser

To b

e sp

ecifi

ed b

y pu

rcha

ser

900 LB

1/2 121 22 22.3 22.9 1.8 1.8 2.1 1.9 1.73/4 130 25.5 27.7 28.2 2.5 2.5 2.7 2.7 2.41 149 28.5 34.5 35 3.6 3.6 3.9 3.7 3.51.1/4159 28.5 43.5 43.7 4.1 4.1 4.5 4.3 41.1/2178 32 49.5 50 5.6 5.4 6.2 5.9 5.52 216 38 62 62.5 10.3 10.5 11.3 11.3 10.52.1/2244.5 41.3 74.7 75.4 15.8 15.8 16.5 16 15.83 241 38 90.7 91.4 12.3 11.8 15 16.8 12.34 292 44.5 116.1 116.8 23.2 22.6 24 24.5 23.25 349 51 143.8 144.5 37.5 36.5 38.5 39.5 37.56 381 55.5 170.7 171.4 48 47.5 50 51.5 48.38 470 63.5 221.5 222.2 74 86 85 89 7510 546 70 276.3 277.4 110 121 125 131 11012 610 79.5 327.1 328.2 146 167 165 187 14614 641 85.5 359.1 360.2 172 180 198 224 17216 705 89 410.5 411.2 192 210 224 259 19218 787 101.5 461.8 462.3 272 294 320 383 27220 857 108 513.1 514.3 330 365 375 482 33024 1041 139.5 615.9 615.9 630 700 680 905 632


1500 LB

1/2 121 22 22.3 22.9 1.8 1.8 2.1 1.9 1.83/4 130 25.5 27.7 28.2 2.5 2.5 2.7 2.7 2.41 149 28.5 34.5 35 3.6 3.6 3.9 3.7 3.51.1/4159 28.5 43.2 43.7 4.1 4.1 4.5 4.3 41.1/2178 32 49.5 50 5.6 5.4 6.2 5.9 5.52 216 38 62 62.5 10.3 10.5 11.3 11.3 10.52.1/2244 41.5 74.7 75.4 15.8 15.8 16.5 16 15.83 267 47.5 90.7 91.4 21.5 18.5 20.5 19.5 18.54 311 54 116.1 116.8 31 29 31.8 33 295 375 73 143.8 144.5 59 54 59 59.5 536 394 82.5 170.7 171.4 74 62 72 75 618 483 92 221.5 222.2 112 105 124 125 10510 584 108 276.3 277.4 184 175 208 215 17212 673 124 327.1 328.2 264 264 306 316 26614 749 133.5 360.2 41616 826 146 411.2 57018 914 162 462.3 74020 984 178 514.3 93024 1168 203 615.9 1500

Bigger sizes on request

2500 LB

1/2 133.5 30 3.2 3 3 33/4 139.5 32 3.6 4 4.5 41 159 35 5.4 5 5 51.1/4 184 38 7.8 8 8 81.1/2 203 44.5 11.5 11 11 112 235 51 19 17 17 172.1/2 267 57 24 25 25 253 305 66.5 43 38 39 384 356 76 66 58 60 585 419 92 111 95 101 956 483 108 172 146 156 1468 552 127 262 220 242 22010 673 165 485 420 465 42012 762 184 698 590 665 590


Flanges

Nominalpipe size

inches


mm

O

Thickness of

flangemin. mm

C

Slip-onmin. mm

B

Lapjoint

min. mmB11

SocketB22

Slip-on ThreadedLapjoint

Welding neck

Blind

Bore Weight in kg

Nominalpipe size

inches


mm

O

Thickness of

flangemin. mm

C

ThreadedLapjoint

Welding neck

Blind

Weight in kg


Stud Bolts with Nuts

Flanges lengthnominal Holes Dia.diameter

Flanges lengthnominal Holes Dia.diameter

1/2” 4 1/2” 64 - -3/4” 4 1/2” 64 - -1” 4 1/2” 70 _ 83

1 1/4” 4 1/2” 70 - 89

1 1/2” 4 1/2” 76 - 892” 4 5/8” 89 - 102

2 1/2” 4 5/8” 95 - 1083” 4 5/8” 95 - 115

3 1/2” 8 5/8” 95 - 1154” 8 5/8” 95 - 1155” 8 3/4” 102 - 1216” 8 3/4” 108 - 121

8” 8 3/4” 115 - 12710” 12 7/8” 127 - 14012” 12 7/8” 127 - 14614” 12 1” 143 - 162

16” 16 1” 150 - 16218” 16 1 1/8” 162 - 17520” 20 1 1/8” 168 - 18824” 20 1 1/4” 191 - 210

1/2” 4 1/2” 70 - -3/4” 4 5/8” 83 - -1” 4 5/8” 83 - -

1 1/4” 4 5/8” 89 - -

1 1/2” 4 3/4” 95 - -2” 8 5/8” 95 - 115

2 1/2” 8 3/4” 108 - 1273” 8 3/4” 115 - 134

3 1/2” 8 3/4” 115 - 1404” 8 3/4” 121 - 1405” 8 3/4” 127 - 1466” 12 3/4” 127 - 153

8” 12 7/8” 146 - 16510” 16 1” 158 - 19412” 16 1 1/8” 181 - 20014” 20 1 1/8” 188 - 206

16” 20 1 1/4” 204 - 22918” 24 1 1/4” 210 - 23520” 24 1 1/4” 222 - 24824” 24 1 1/2” 248 - 273

4” 8 7/8” 146 140 1535” 8 7/8” 153 146 1596” 12 7/8” 159 153 1658” 12 1” 181 175 187

10” 16 1 1/8” 200 194 20612” 16 1 1/4” 216 210 22914” 20 1 1/4” 222 216 23516” 20 1 3/8” 235 229 248

18” 24 1 3/8” 242 235 25420” 24 1 1/2” 260 254 27324” 24 1 3/4” 289 283 302

1/2” 4 1/2” 83 76 833/4” 4 5/8” 95 89 951” 4 5/8” 95 89 95

1 1/4” 4 5/8” 102 95 102

1 1/2” 4 3/4” 115 108 1152” 8 3/8” 115 108 121

2 1/2” 8 3/4” 127 121 134

3” 8 3/4” 134 127 1403 1/2” 8 7/8” 146 140 153

4” 8 7/8” 153 146 1595” 8 1” 175 168 1816” 12 1” 181 175 187

8” 12 1 1/8” 206 200 21310” 16 1 1/4” 229 222 23512” 20 1 1/4” 235 229 24214” 20 1 3/8” 248 242 254

16” 20 1 1/2” 267 260 27318” 20 1 5/8” 286 280 29220” 24 1 5/8” 305 299 31124” 24 1 7/8” 346 340 359

3” 8 7/8” 153 146 1594” 8 1 1/8” 181 175 1885” 8 1 1/4” 204 197 2106” 12 1 1/8” 206 200 231

8” 12 1 3/8” 235 229 24210” 16 1 3/8” 248 242 25412” 20 1 3/8” 267 260 27314” 20 1 1/2” 286 280 298

16” 20 1 5/8” 299 292 31118” 20 1 7/8” 346 340 35920” 20 2” 368 362 38824” 20 2 1/2” 460 454 485

1/2” 4 3/4” 115 108 -3/4” 4 3/4” 121 115 -1” 4 7/8” 134 127 134

1 1/4” 4 7/8” 134 127 134

1 1/2” 4 1” 150 143 1502” 8 7/8” 153 146 159

2 1/2” 8 1” 168 162 1753” 8 1 1/8” 188 181 194

4” 8 1 1/4” 210 204 2165” 8 1 1/2” 260 254 2676” 12 1 3/8” 273 267 2868” 12 1 5/8” 305 299 318

10” 12 1 7/8” 359 352 36512” 16 2” 400 394 41914” 16 2 1/4” 432 426 45716” 16 2 1/2” 473 467 505

18” 16 2 3/4” 518 512 55020” 16 3” 570 564 60324” 16 3 1/2” 640 634 686

1/2” 4 3/4” 127 121 1273/4” 4 3/4” 134 127 1341” 4 7/8” 146 140 146

1 1/4” 4 1” 162 158 168

1 1/2” 4 1 1/8” 181 175 1882” 8 1” 187 181 195

2 1/2” 8 1 1/8” 206 200 2133” 8 1 1/4” 235 229 248

4” 8 1 1/2” 267 260 2805” 8 1 3/4” 320 314 3336” 8 2” 368 362 3818” 12 2” 407 400 425

10” 12 2 1/2” 510 505 53712” 12 2 3/4” 562 555 588

Serie

150

LB30

0 LB

400

LB60

0 LB

Serie

600

LB90

0 LB

1500

LB

2500

LB


High Tensile Alloy Steel - Stud Bolts

2 .10 .21 .35 .58 .... .... .... .... .... .... .... .... .... ....

2 1/4 .11 .22 .37 .60 .... .... .... .... .... .... .... .... .... ....

2 1/2 .11 .23 .38 .63 .92 .... .... .... .... .... .... .... .... ....

2 3/ 4 .12 .24 .40 .65 .95 .... .... .... .... .... .... .... .... ....

3 .13 .25 .42 .68 .98 1.38 .... .... .... .... .... .... .... ....

3 1/4 .13 .26 .44 .70 1.02 1.42 .... .... .... .... .... .... .... ....

3 1/2 .14 .27 .45 .73 1.06 1.47 .... .... .... .... .... .... .... ....

3 3/4 .14 .28 .47 .75 1.09 1.52 .... .... .... .... .... .... .... ....

4 .15 .29 .49 .78 1.13 1.56 2.08 .... .... .... .... .... .... ....

4 1/4 .16 .30 .51 .80 1.16 1.61 2.14 .... .... .... .... .... .... ....

4 1/2 .16 .31 .52 .83 1.20 1.66 2.20 .... .... .... .... .... .... ....

4 3/4 .17 .32 .54 .86 1.23 1.70 2.26 .... .... .... .... .... .... ....

5 .18 .33 .56 .88 1.27 1.75 2.32 2.94 .... .... .... .... .... ....

5 1/4 .18 .34 .58 .90 1.30 1.80 2.38 3.02 .... .... .... .... .... ....

5 1/2 .19 .35 .59 .93 1.34 1.84 2,44 3.09 .... .... .... .... .... ....

5 3/4 .19 .36 .61 .95 1.37 1.89 2.50 3.17 .... .... .... .... .... ....

6 .20 .37 .63 .98 1.41 1.94 2.56 3.24 4.14 5.06 .... .... .... ....

6 1/4 .21 .39 .65 1.00 1.44 1.99 2.62 3.31 4.23 5.17 .... .... .... ....

6 1/2 .21 .40 .67 1.03 1.48 2.03 2.68 3.39 4.33 5.28 .... .... .... ....

6 3/4 .22 .41 .68 1.05 1.51 2.08 2.74 3.46 4.42 5.39 .... .... .... ....

7 .23 .42 .70 1.08 1.55 2.13 2.80 3.54 4.51 5.50 6.80 .... .... ....

7 1/4 .23 .43 .72 1.10 1.58 2.17 2.86 3.61 4.60 5.61 6.93 .... .... ....

7 1/2 .24 .44 .74 1.13 1.62 2.22 2.92 3.68 4.69 5.72 7.07 .... .... ....

7 3/4 .24 .45 .75 1.16 1.65 2.27 2.98 3.76 4.78 5.83 7,19 .... .... ....

Weight in kilogram = weight in pounds x 0,454

These high tensile alloy steel bolt-studs are recommended where temperatures exceed 450°F., regardless of what the pressure may be or even for lower temperatures, when higsafety factors are desired. < Bolt-studs will be furnished with nuts assembled only at customer's request. Bolt-studs and nuts are threa-ded in accordance with American Standard ASA B I.I. Bolt-stud threads have a class 2-A dimen-sions and nut threads have class 2-B dimension.

DIAM.3/8 1/2 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2

INCHES

Threads16 13 11 10 9 8 8 8 8 8 8 8 8 8

per Inch

Length,WEIGHT, POUNDS, EACH

inches

DIAMETER


High Tensile Alloy Steel - Bolt Studs

8 .25 .46 .77 1.18 1.69 2.31 3.04 3.83 4.88 5.94 7.32 8.80 .... ....

8 1/4 .26 .47 .79 1.20 1.72 2.36 3.10 3.91 4.97 6.05 7.45 8.95 .... ....

8 1/2 .26 .48 .81 1.23 1.76 2.41 3.16 3.98 5.06 6.16 7.58 9.10 .... ....

8 3/4 .27 .49 .82 1.25 1.79 2.45 3,22 4.06 5.15 6.27 7.71 9.26 .... ....

9 .28 .50 .84 1.28 1.83 2.50 3.28 4.13 5.24 6.38 7.84 9.41 12.02 ....

9 1/4 .... .... .... .... 1.86 2.55 3.34 4.20 5.34 6.49 7.98 9.57 12.20 ....

9,5 .... .... .... .... 1.90 2.59 3.40 4.28 5.43 6.60 8.11 9.72 12.38 ....

9,75 .... .... .... .... .... 2.64 3.46 4.35 5.52 6.71 8.24 9.87 12.56 ....

10 .... .... .... .... .... 2.69 3.52 4.43 5.61 6.81 8.37 10.03 12.74 14.82

10 1/4 .... .... .... .... .... 2.74 3.58 4.50 5.70 6.92 8.50 10.18 12.92 15.03

10 1/2 .... .... .... .... .... 2.78 3.64 4.58 5.79 7.03 8.63 10.33 13.14 15.25

10 3/4 .... .... .... .... .... 2.83 3.70 4.65 5.89 7.14 8.76 10.49 13.32 15.46

11 .... .... .... .... .... .... 3.76 4.72 5.98 7.25 8.89 10.64 13.50 15.68

11 1/4 .... .... .... .... .... .... 3.82 4.80 6.07 7.36 9.03 10.79 13.68 15.89

11 1/2 .... .... .... .... .... .... 3.88 4.87 6.16 7.47 9.16 10.95 13.86 16.11

11 3/4 .... .... .... .... .... .... 3.94 4.95 6.25 7.58 9.29 11.10 14.04 16.32

12 .... .... .... .... .... .... 4.00 5.02 6.34 7.69 9.42 11.25 14.22 16.54

12 1/4 .... .... .... .... .... .... 4.06 5,09 6.44 7.80 9.55 11.41 14.40 16.75

12 1/2 .... .... .... .... .... .... 4.13 5.17 6.53 7.91 9.68 11.56 14.58 16.97

12 3/4 .... .... .... .... .... .... 4.18 5.24 6.62 8.02 9.81 11.72 14.76 17.18

13 .... .... .... .... .... .... 4.24 5.32 6.71 8.13 9.94 11.87 14.94 17.40

.... .... .... .... .... .... .... .... .... .... .... .... .... .... ....

.... .... .... .... .... .... .... .... .... .... .... .... .... .... ....

.... .... .... .... .... .... .... .... .... .... .... .... .... .... ....

Weight in kilogram = weight in pounds x 0,454

DIAM.3/8 1/2 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2

INCHES

Threads16 13 11 10 9 8 8 8 8 8 8 8 8 8

per Inch

Length,WEIGHT, POUNDS, EACH

inches

DIAMETER


Steel Butt Welding Fittings*

all Sizes in mm

1/2 21,34 38,10 15,9 38,1 - 25,4 25,4 34,9 76,2 50,8 50,83/4 26,67 28,60 11,1 28,6 - 28,6 25,4 42,8 76,2 50,8 50,8

1 33,40 38,10 22,2 38,1 25,4 38,1 38,1 50,8 101,6 50,8 50,811/4 42,16 47,60 25,4 47,6 31,8 47,6 38,1 63,5 101,6 50,8 50,811/2 48,26 57,20 28,6 57,2 38,1 57,2 38,1 73,0 101,6 50,8 63,5

2 60,32 76,20 34,9 76,2 50,8 63,5 38,1 92,0 152,4 63,5 76,221/2 73,02 95,20 44,5 95,2 63,5 76,2 38,1 104,8 152,4 63,5 88,9

3 88,90 114,00 50,8 114,0 76,2 85,7 50,8 127,0 152,4 63,5 88,931/2 101,60 133,00 57,2 133,0 88,9 95,3 63,5 139,7 152,4 76,2 -

4 114,30 152,00 63,5 152,0 101,6 104,8 63,5 157,2 152,4 76,2 101,65 141,30 191,00 82,6 191,0 127,0 123,8 76,2 185,7 203,2 76,2 127,06 168,27 228,60 95,3 228,6 152,4 142,8 88,9 215,9 203,2 88,9 140,08 219,07 304,80 127,0 304,8 203,2 177,8 101,6 270,0 203,2 101,6 152,0

10 273,05 381,00 158,7 381,0 254,0 215,9 127,0 324,0 254,0 127,0 178,012 323,85 457,20 190,5 457,2 305,0 254,0 152,4 381,0 254,0 152,4 203,014 355,60 533,40 222,2 533,4 356,0 280,0 165,1 412,8 305,0 152,4 330,016 406,40 609,60 254,0 609,6 406,0 304,8 177,8 470,0 305,0 152,4 356,018 457,20 685,80 285,7 685,8 457,0 343,0 203,2 533,4 305,0 152,4 381,020 508,00 762,00 317,6 762,0 508,0 381,0 228,6 584,2 305,0 152,4 508,024 609,60 914,40 381,0 914,4 610,0 432,0 266,7 692,2 305,0 152,4 508,0

* Subject to sufficient manufacturing quantities, we produce these products in nearly every alloy mentioned in this ca-talogue, either in seamless pressed or welded execution.

Nominal Pipe size

Out-sideDia-

meter(O D)

90°ELBOWS

longradius

90°ELBOWS

shortradius

Reducersconcentriceccentric

Lenght (H)specified from

large end

Short(MSS)lenght

(F)

Long(ASA)lenght

(F)

Dia-metre

(G)

Lenght

(E)

Centerto face

(A)

Radius

(A)

Center to face

(B)

Center to face

(A)

Centerto end

(C)

StraightTEES

CAPS STUB ENDS45°

ELBOWSlong radius


TPS Butt Weld FittingsST 37-0 (P 235 T1), ST 35,8l (P235 G1 TH), DIN 2605/2606

20,0 x 2,0 50 ± 5 0,03 85 ± 5 0,06

21,3 x 2,0 55 ± 5 0,04 85 ± 5 0,06

25,0 x 2,0 55 ± 5 0,05 105 ± 5 0,09

26,9 x 2,6 57 ± 5 0,06 115 ± 5 0,13

30,0 x 2,6 67 ± 5 0,09 125 ± 5 0,17

31,8 x 2,6 70 ± 5 0,10 135 ± 5 0,20

33,7 x 2,6 76 ± 5 0,12 145 ± 5 0,23

38,0 x 2,6 90 ± 5 0,16 165 ± 5 0,24

42,4 x 2,6 95 ± 5 0,19 185 ± 5 0,37

44,5 x 2,6 102± 5 0,22 195± 5 0,41

48,3 x 2,6 114 ±6 0,26 215 ± 5 0,49

51,0 x 2,6 127 ±6 0,31 230 ± 5 0,56

57,0 x 2,9 144 ±6 0,44 255 ± 5 0,77

60,3 x 2,9 152 ±6 0,49 270 ± 5 0,87

635 x 2,9 165 ± 6 0,56 280 ± 5 0,97

70,0 x 2,9 184 ± 6 0,69 320 ± 5 1,21

76,1 x 2,9 190 ± 6 0,78 350 ± 5 1,44

82,5 x 3,2 215 ± 6 1,06 380 ± 5 1,87

88,9 x 3,2 229 ± 6 1,22 410 ± 5 2,18

1016 x 3,6 267 ± 6 1,82 475 ± 5 3,25

108,0 x 3,6 285 ± 6 2,07 505 ± 10 3,68

114,3 x 3,6 305 ± 6 2,35 540 ± 10 4,17

121,0 x 4,0 340 ± 10 3,08 565 ± 10 5,12

127,0 x 4,0 350 ± 10 3,34 600 ± 10 5,72

133,0 x 4,0 362 ± 6 3,62 625 ± 10 6,25

139,7 x 4,0 381 ± 8 4,01 660 ± 10 6,94

152,4 x 4,5 381 ± 10 5,54 715 ± 10 9,22

159,0 x 4,5 432 ± 8 5,82 750 ± 10 10,10

165,1 x 4,5 460 ± 8 6,44 780 ± 10 10,90

168,3 x 45 457 ± 8 6,52 780 ± 20 11,10

177,8 x 5,0 500 ± 10 8,37 860 ± 20 14,40

193,7 x 5,4 540 ± 8 10,00 910 ± 25 17,90

216,0 x 6,0 610 ± 8 14,90 1020 ± 25 24,90

219,1 x 6,3 610 ± 8 15,80 1020 ± 25 26,50

244,5 x 6,3 680 ± 8 19,80 1160 ± 25 33,70

267,0 x 6,3 756 ± 8 24,10 1270 ± 30 40,40

273,0 x 6,3 762 ± 10 24,80 1300 ± 30 42,30

298,5 x 7,1 840 ± 10 33,70 1400 ± 30 56,10

318,0 x 7,5 910 ± 10 41,10 1515 ± 35 68,30

323,9 x 7,1 914 ± 10 39,80 1550 ± 35 67,50

355,6 x 8,0 1067 ± 20 57,50 1700 ± 40 91,60

368,0 x 8,0 1067 ± 20 59,50 1760 ± 40 98,20

406,4 x 8,8 1219 ± 20 82,60 1940 ± 50 131,00

419,0 x 10,0 1219 ± 20 96,60 2000 ± 50 158,00

457,2 x 10,0 1372 ± 30 119,00 2245 ± 50 194,00

470,0 x 10,5 1345 ± 70 126,00 2245 ± 50 210,00

508,0 x 11,0 1524 ± 70 161,00 2490 ± 80 264,00

521,0 x 11,5 1495 ± 70 170,00 2490 ± 80 283,00

558,0 x 12,5 1676 ± 70 220,00 2750 ± 80 364,00

609,6 x 12,5 1828 ± 100 204,00 3000 ± 100 434,00

type 3 type 5

Sizes Radius Weight Radius Weight

O.D. x W.T. 3 x di Elbow 3 x di Elbow


TPS Butt Weld Fittings

Sch. STD Sch.XS Sch. XXSNom. size O.D. Wall Thick Weight Wall Thick Weight Wall Thick WeightDN mm mm kg mm kg mm kginches1 33.40 3.38 0.11 4.55 0.14 9.09 0.11 1/4 42.16 3.56 0.17 4.85 0.22 9.70 0.311 1/2 48.26 3.68 0.23 5.08 0.29 10.16 0.452 60.32 3.91 0.37 5.54 0.49 11.07 0.842 1/2 73.02 5.16 0.74 7.01 0.95 14.02 1.603 88.90 5.49 1.10 7.62 1.47 15.24 2.594 114.30 6.02 1.95 8.56 2.66 17.12 5.155 141.30 6.55 3.31 9.52 4.63 19.05 9.056 168.30 7.11 5.13 10.97 7.57 21.95 14.958 219.10 8.18 10.30 12.70 15.40 22.22 27.2010 273.00 9.27 18.30 12.70 24.40 25.40 48.7112 323.80 9.52 27.00 12.70 35.50 25.40 70.4414 355.60 9.52 34.70 12.70 45.0016 406.40 9.52 45.40 12.70 60.0018 457.20 9.52 58.00 12.70 76.0020 508.00 9.52 71.50 12.70 94.0022 558.80 9.52 87.40 12.70 115.0024 609.60 9.52 104.00 12.70 137.00



Weights are indicative only/bigger sizes on request

Butt welding pipe fittings seamless and welded from 1/14“ - 70“, seamless and welded L.R. 45° and 90° elbows - 180° return bend - S.R.90° elbows - 180° return bends.

Equal and reducing tees - caps - concentric and eccentric reducers - fittings as per drawing-components according to your designs.









Sch. STD Sch.XS Sch. XXSNom. size O.D. Wall Thick Weight Wall Thick Weight Wall Thick WeightDN mm mm kg mm kg mm kginches

1 33.40 3.38 0.21 4.55 0.27 9.09 0.461 1/4 42.16 3.56 0.35 4.85 0.46 9.70 0.821 1/2 48.26 3.68 0.50 5.08 0.66 10.16 1.202 60.32 3.91 0.90 5.54 1.23 11.07 2.202 1/2 73.02 5.16 1.78 7.01 2.33 14.02 4.003 88.90 5.49 2.78 7.62 3.72 15.24 6.944 114.30 6.02 5.26 8.56 7.30 17.12 13.725 141.30 6.55 8.94 9.52 12.60 19.05 24.046 168.30 7.11 13.90 10.97 20.70 21.95 39.808 219.10 8.18 27.90 12.70 42.00 22.22 72.2410 273.00 9.27 49.40 12.70 66.70 25.40 129.8812 323.80 9.52 72.50 12.70 95.30 25.40 187.8214 355.60 9.52 93.00 12.70 123.0016 406.40 9.52 122.50 12.70 161.0018 457.20 9.52 155.00 12.70 205.0020 508.00 9.52 192.50 12.70 254.0022 558.80 9.52 237.60 12.70 315.0024 609.60 9.52 277.50 12.70 368.00



1 33.40 3.38 0.32 4.55 0.40 9.09 0.651 1/4 42.16 3.56 0.65 4.85 0.75 9.70 1.181 1/2 48.26 3.68 0.80 5.08 1.05 10.16 1.652 60.32 3.91 1.40 5.54 2.02 11.07 3.002 1/2 73.02 5.16 2.68 7.01 3.00 14.02 4.503 88.90 5.49 3.75 7.62 4.30 15.24 7.604 114.30 6.02 6.50 8.56 8.20 17.12 15.005 141.30 6.55 10.00 9.52 13.50 19.05 29.906 168.30 7.11 16.00 10.97 19.30 21.95 40.008 219.10 8.18 27.00 12.70 33.00 22.22 68.0010 273.00 9.27 41.00 12.70 58.50 25.40 98.5012 323.80 9.52 65.00 12.70 78.00 25.40 150.0014 355.60 9.52 102.00 12.70 115.0016 406.40 9.52 110.00 12.70 167.0018 457.20 9.52 145.00 12.70 190.0020 508.00 9.52 195.00 12.70 245.0022 558.80 9.52 235.00 12.70 320.0024 609.60 9.52 300.00 12.70 380.00





1 33.40 3.38 0.10 4.55 0.12 9.09 0.201 1/4 42.16 3.56 0.14 4.85 0.18 9.70 0.301 1/2 48.26 3.68 0.16 5.08 0.22 10.16 0.352 60.32 3.91 0.23 5.54 0.32 11.07 0.602 1/2 73.02 5.16 0.40 7.01 0.47 14.02 1.003 88.90 5.49 0.65 7.62 0.85 15.24 1.804 114.30 6.02 1.15 8.56 1.58 17.12 3.505 141.30 6.55 1.90 9.52 2.65 19.05 5.506 168.30 7.11 2.95 10.97 4.30 21.95 8.108 219.10 8.18 5.10 12.70 7.60 22.22 14.9110 273.00 9.27 9.10 12.70 12.00 25.40 29.3112 323.80 9.52 13.40 12.70 17.25 25.40 41.0014 355.60 9.52 16.10 12.70 20.5016 406.40 9.52 20.50 12.70 26.2018 457.20 9.52 26.00 12.70 33.5020 508.00 9.52 32.50 12.70 42.6022 558.80 9.52 42.00 12.70 51.0024 609.60 9.52 46.50 12.70 59.50


Reducing Tees Conc. and Ecc.Nominal sizes Outside dia. ReducersInches/ mm Kgs. each Kgs. each

STD XS STD XS

1 x 1/2 33 x 21 0.40 0.55 0.13 0.161 x 3/4 33 x 27 0.40 0.55 0.13 0.171 1/2 x 1/2 48 x 21 0.92 1.20 0.20 0.281 1/2 x 3/4 48 x 27 0.92 1.20 0.22 0.301 1/2 x 1 48 x 33 0.92 1.20 0.24 0.322 x 3/4 60 x 27 1.50 2.00 0.33 0.462 x 1 60 x 33 1.50 2.00 0.37 0.482 x 1 1/2 60 x 48 1.50 2.00 0.41 0.542 1/2 x 1 73 x 33 2.40 3.00 0.60 0.802 1/2 x 1 1/2 73 x 48 2.40 3.00 0.68 0.862 1/2 x 2 73 x 60 2.40 3.00 0.75 0.953 x 1 1/2 89 x 48 3.00 4.00 0.87 1.163 x 2 89 x 60 3.00 4.00 0.91 1.203 x 2 1/2 89 x 73 3.00 4.00 1.00 1.304 x 1 1/2 114 x 48 5.50 7.00 1.30 1.804 x 2 114 x 60 5.50 7.00 1.50 1.904 x 2 1/2 114 x 73 5.50 7.00 1.60 2.054 x 3 114 x 89 5.50 7.00 1.65 2.155 x 2 141 x 60 9.00 12.00 2.35 3.005 x 2 1/2 141 x 73 9.00 12.00 2.55 3.305 x 3 141 x 89 9.00 12.00 2.65 3.555 x 4 141 x 114 9.00 12.00 2.75 3.80


Nominal size Outside dia. Reducing Tees Conc. and Ecc.

Inches mm Kgs. each Reducers

Kgs. each

STD XS STD XS

6 x 2 1/2 168 x 73 14.00 19.00 3.50 4.60

6 x 3 168 x 89 14.00 19.00 3.70 5.10

6 x 4 168 x 114 14.00 19.00 3.80 5.50

6 x 5 168 x 141 16.00 19.00 3.95 5.75

8 x 4 219 x 114 25.00 33.00 5.95 8.80

8 x 5 219 x 141 25.00 33.00 6.08 9.00

8 x 6 219 x 168 25.00 33.00 6.35 9.30

10 x 4 273 x 114 40.00 50.00 9.50 12.00

10 x 5 273 x 141 40.00 50.00 9.90 13.00

10 x 6 273 x 168 40.00 50.00 10.10 13.50

10 x 8 273 x 219 40.00 50.00 10.50 14.20

12 x 5 324 x 141 55.00 70.00 13.80 17.70

12 x 6 324 x 168 55.00 70.00 14.10 18.40

12 x 8 324 x 219 55.00 70.00 14.50 19.10

12 x 10 324 x 273 55.00 75.00 15.20 19.80

14 x 6 356 x 168 90.00 105.00 25.00 34.00

14 x 8 356 x 219 90.00 105.00 26.00 35.00

14 x 10 356 x 273 90.00 105.00 27.00 36.00

14 x 12 356 x 324 100.00 115.00 29.00 38.00

16 x 6 406 x 168 100.00 150.00 32.00 42.50

16 x 8 406 x 219 100.00 150.00 32.00 42.50

16 x 10 406 x 273 100.00 150.00 33.00 44.00

16 x 12 406 x 324 115.00 160.00 34.00 45.00

16 x 14 406 x 356 115.00 160.00 35.00 46.00

18 x 8 457 x 219 120.00 150.00 39.00 52.00

18 x 10 457 x 273 120.00 150.00 40.00 52.00

18 x 12 457 x 324 130.00 160.00 41.00 54.00

18 x 14 457 x 356 130.00 175.00 41.50 55.00

18 x 16 457 x 406 130.00 175.00 43.00 56.00

20 x 8 508 x 219 163.50 214.00 60.00 78.00

20 x 10 508 x 273 163.50 214.00 60.00 78.00

20 x 12 508 x 324 163.50 214.00 61.00 80.00

20 x 14 508 x 356 163.50 214.00 61.00 80.00

20 x 16 508 x 406 168.00 218.00 63.00 83.00

20 x 18 508 x 457 168.00 218.00 65.00 84.50

22 x 10 559 x 273 172.50 245.00 67.00 88.50

22 x 12 559 x 324 172.50 245.00 67.00 88.50

22 x 14 559 x 356 172.50 245.00 67.00 88.50

22 x 16 559 x 406 209.00 260.00 68.50 90.00

22 x 18 559 x 457 209.00 260.00 70.00 92.00

22 x 20 559 x 508 220.00 280.00 71.00 94.00

24 x 10 610 x 273 204.00 300.00 73.00 96.00

24 x 12 610 x 324 218.00 300.00 73.00 96.00

24 x 14 610 x 356 222.00 300.00 73.00 96.00

24 x 16 610 x 406 222.00 320.00 73.00 96.00

24 x 18 610 x 457 227.00 320.00 74.00 98.00

24 x 20 610 x 508 227.00 320.00 76.00 100.00

24 x 22 610 x 559 227.00 350.00 76.00 100.00



TPS Forged Fittings


TPS Forged Fittings


TPS Forged Fittings


Piping System Cupronickel 90/10 - For Seawater Systems,Offshore Platforms, Desalination Plants, etc.

Cupronickel 90/10 has the following nominal composition:.

Ni 9,0 - 11,0 % This composition complies with

Fe 1,0 - 1,8 % DIN 2.0872, UNS C 70600 and BS Alloy CN 102

Mn 0,5 - 1,0 % (DIN 2.0872 as per DIN 17664)

Cu Remainder

Design Specifications:The wallthicknesses of Cupronickel 90/10 pipes and fittings as per this system are calculated as per the basic requirements of Lloyds' Register of Shipping and Det Norske Veritas. Saddle Tees aredesigned as per ASME Code Sect. VIII-UG 101.

The dimensions mentioned on the following pages are based on a maximum design pressure of 14 Bar (203 Ibf/in2), with a related test pressure of 21 Bar (304 Ibf/in2).Please ask us also for materials for higher pressure ratings.Cupronickel 90/10 piping system is approved for operating temperatures of 75° C.

Possible Inspection Companies:• Lloyds' Register of Shipping• Det Norske Veritas• Büro Veritas• T.Ü.V

Some typical Applications:• Oily water treatment systems.• Process cooling.• Fire mains and sprinkler systems (wet and dry).• Seawater feeding to desalination plants.• Seawater ballast pipe for concrete platform.


Piping System Cupronickel 90/10Piping Range

Outside Diameter: BS 2871 / Part 2 - Table 3

WaIlthickness: Conforming to Lloyds Offshore requirements for 14 Bar systems. Wallthicknesses forsizes up to and including 159 mm are also in accordance with BS

2871 / Part 2 - Table 3.

Size Range: Nominal Diameter Outside Diameter Wallthickness Weight (theor.)

Inch (actual in mm) mm kg/m

1/2 16 1,0 0,4213/4 25 1,5 0,9901 30 1,5 1,201 1/4 38 1,5 1,541 1/2 44,5 1,5 1,812 57 1,5 2,343 76,1 2,0 4,173 1/2 88,9 0,2 6,074 108 2,5 7,416 159 2,5 11,08 219,1 3,5 21,210 267 4,0 29,612 323,9 5,0 44,714 368 5,5 56,016 419 6,0 70,018 457,2 6,0 ( 7.0)* 76,0 (88.5)*20 508 6,5 ( 7.5) * 91,6 (106)*24 609,6 8,0 ( 9.0) * 135 (152)*28 711,2 9,0 (10.5) * 178 (207)*32 812,8 10,0 (12.0) * 226 (270)*36 914,4 11,0 (13.5) * 279 (342)*

* (the thicker wallthicknesses mentioned in brackets are scheduled for use in connection with saddles)

Sizes 16 to 88.9 are generally supplied in seamless execution.Sizes 108 to 419 are normally supplyable in both seamless or welded.Sometimes certain sizes may be only available either in welded or seamless.Sizes 457.2 up to 914.4 are only supplyable in welded.Welded tubes will be supplied 100% x-rayed as per ASME-Code Section VIII, UW 51 ifspecified in the purchase order. Other Non-destructive tests are available.

Lengths:Seamless 16 up to 88.9 mm O.D. ................................................................................................................................4-6 meters(Random)Seamless 108 up to 368 mm 0.D...............................................................................................................................4-6 metersSeamless 419 mm 0.D...............................................................................................................................................................2-4 metersWelded sizes normally 3 meters, sizes 368 up to 914.4 mm O.D.,wallthicknesses up to and including 9 mm also in 6 meters.

Note:The nominal sizes result in the actual diameters as above specified and are for some sizesnot indentical with actual sizes as specified by other Standards.


Piping System Cupronickel 90/10Elbow and Bend Range

Elbows/bends are available in 90 and 45 (180 angles and other may be producable at special request)

Types: Seamless forged, seamless cold bend-pressed and heattreated or welded constrution depending from size

Radius: Generally type.l.50 as per DIN 2605l8

Nom. Size Outside Walth. RadiusActual Diam. (A)

(inch) (mm) (mm) (mm)

1/2 16 1.0 •3/4 25 1.5 •1 30 1.5 •1 1/4 38 1.5 •1 1/2 44,5 1.5 512 57 1.5 723 76,1 2.0 953 1/2 88,9 2.5 114,54 108 2.5 142,56 159 2.5 2168 219,1 3.5 30510 267 4.0 37812 323,9 5.0 45714 368 5.5 533,516 419 6.0 61018 457,2 6.0/ 7.0 68620 508 6.5/ 7.5 76224 609,6 8.0/ 9.0 91528 711,2 9.0/10.5 106732 812,8 10.0/12.0 122036 914,4 11.0/13.5 1370

• These sizes may be supplied in socket welding type subject to quantity requiredRadii tolerances as specified in DIN 2605


Piping System Cupronickel 90/10Fittings

RANGE OF REOUCERSReducers for the cupronickel 90/10 piping system are available in concentric and in eccentric type. Some sizes are in seamless, others in welded execution.

Building lengths are as per 0IN 2616

All combinations are generally possible, special drastic reductions may result in longer building lengths than specified in DIN 2616

RANGE OF TEESGenerally tee-connections in cupronickel 90/10 should be substituted by saddles or reinforced outlets. For large quantities however also tees are producable.

RANGE OF CAPS (Based on design of DI N 28011 )

Nom i nalSize Outside Wall-in. 0iameter H 1 H 2 Thickness

1 30 12 4 1,51 1/4 38 12 5,5 1,51 1I2 44,5 12 7 1,52 57 12 9 1,53 76,1 12 13 2,03 1/2 88,9 12 15 2,54 108 12 19 2,56 159 12 29 2,58 219,1 15 38 3,510 267 20 50 4,012 323,9 20 61 5,014 368 25 69 5,516 419 25 79 6,018 457,2 25 85 6,020 508 25 94 6,524 609,6 30 111 8,028 711,2 35 134 9,032 812,8 35 154 10,036 914,4 40 172 11,0


Piping System Cupronickel 90/10Range of Insert Saddle Branches

Building-in dimensions (mm)Building-in dimensions for equal and reducing saddles are dictated by branch outlet size as table below.

Nominal Tube Actual Cutside S1S1ze (in.) Diameter in mm b 2 L (min.) h r

1 1/2 44,5 35 74 ± 2.5 1,5 15 32 57 40 97 ± 3 1,5 15 33 76,1 50 126 ± 3 2,0 15 3

31/2 88,9 55 149 ± 3 2,5 15 34 108 75 188 ± 4 2,5 15 36 159 95 279 ± 4 2,5 15 58 219,1 125 379 ± 5 3,5 15 5

10 267 155 447 ± 5 4,0 15 512 323,9 185 519 ± 6 5,0 16 514 368 200 613 ± 6 5,5 16 516 419 225 680 ± 6 6,0 16 718 457,2 250 800 ± 6 7,0 18 720 508 275 880 ± 7 7,5 18 724 609,6 300 1020 ± 7 9,0 20 728 711,2 360 1225 ± 7 10,5 20 732 812,8 410 1400 ± 7 12,0 20 736 914,4 460 1550 ± 7 13,5 20 7

Saddles in smaller sizes than 44.5 mm are available on special requestPlease specify ail dimensions of Run Pipe and Branch Pipe connection in all cases.


Piping System Cupronickel 90/10Range of lightweight Threading-Outlets

Lightweight Threading-Outlets are forged and machined. They will be welded to the run pipe and there will be a screwedconnection to the outlet pipe.

Available combinations

Header Size Branch Sizes for thread connection to API-NPT-Sizes(Run Pipe)mm Inch (N.B. as per API)

25,0 1/2" - - - - -30,0 1/2" 3/4" - - - -44,5 1/2" 3/4" 1" - - -57,0 1/2" 3/4" 1" 1 1/4" - -76,1 1/2" 3/4" 1" 1 1/4" 1 1/2" -108,0 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"159,0 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"219,1 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"267,0 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"323,9 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"368,0 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"419,0 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"457,2 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"508,0 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"609,6 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"711,2 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"812,8 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"914,4 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"

Building-in Sizes for Lightweight Threading Outlets

Header Size Branch Size H L F(API-NPT-Thread)

mm inch

25 - 914,4 1/2” 23,8 27,0 31,7

30 - 914,4 3/4” 25,4 33,4 36,5

44,5 - 914,4 1” 28,6 44,5 46,0

57 - 914,4 1 1/4” 30,2 60,3 61,9

76,1 - 914,4 1 1/2” 33,1 73,0 74,6

108 - 914,4 2” 47,6 101,6 104,8

Please specify all header and outlet sizes in any case.


Piping System Cupronickel 90/10Range of lightweight Welding-Outlets

Lightweight Welding+Outlets are forged and machined. They will be welded to the run p1pe and there wiii be a buttweidinx connection to the outlet pipe.

Available Combinations

Header Size Branch Sizemm mm

16,0 16,00 - - - - - - - - - - - - - - - -

25,0 16,00 25 - - - - - - - - - - - - - - -

30,0 16,00 25 30,00 - - - - - - - - - - - - - -

38,0 16,00 25 30,00 44,5 - - - - - - - - - - - -

44,5 16,00 25 30,00 44,5 57 - - - - - - - - - - - -

57,0 16,00 25 30,00 44,5 57 76,1 - - - - - - - - - - -

76,1 16,00 25 30,00 44,5 57 76,1 88,9 - - - - - - - - - -

88,9 16,00 25 30,00 44,5 57 76,1 88,9 108 - - - - - - - - -

108,0 16,00 25 30,00 44,5 57 76,1 88,9 108 159,00 - - - - - - - -

159,0 16,00 25 30,00 44,5 57 76,1 88,9 108 159,00 219,1 - - - - - - -

219,1 16,00 25 30,00 44,5 57 76,1 88,9 108 159,00 219,1 267,00 - - - - - -

267,0 16,00 25 30,00 44,5 57 76,1 88,9 108 159,00 219,1 267,00 323,9 - - - - -

323,9 16,00 25 30,00 44,5 57 76,1 88,9 108 159,00 219,1 267,00 323,9 368,00 - - - -

368,0 16,00 25 30,00 44,5 57 76,1 88,9 108 159,00 219,1 267,00 323,9 368,00 419,00 - - -

419,0 16,00 25 30,00 44,5 57 76,1 88,9 108 159,00 219,1 267,00 323,9 368,00 419,00 457,7 - -

457,2 16,00 25 30,00 44,5 57 76,1 88,9 108 159,00 219,1 267,00 323,9 368,00 419,00 457,7 508,00 -

609,6 16,00 25 30,00 44,5 57 76,1 88,9 108 159,00 219,1 267,00 323,9 368,00 419,00 457,7 508,00 609,6

711,2 On Request

812,8 On Request

914,4 On Request

Welding+Outlet Type 'A'Welding+Outlet Type 'B' Welding Outlet Type 'A' and 'B'

Building-in sizes for Welding+Outlets

Header Size O.D. of H LOutlet Pipe

mm mm

16 to 44.5 16 19,05 16,057 to 609.6 16 17,5 27,025 to 44.5 25 22,2 25,4

57 to 609.6 25 20,6 33,330 to 44.5 30 27,0 30,2

57 to 609.6 30 22,2 44,544.5 44,5 33,3 44,5

57 to 609.6 44,5 28,6 60,357 to 76.1 57 38,1 57,1

88.9 to 609.6 57 33,3 73,076.1 to 108 76,1 47,6 76,2

159 to 609.6 76,1 44,5 101,688.9 to 108 88,9 47,6 88,9

159 to 609.6 88,9 44,5 101,6108 to 159 108 52,4 108,0

219.1 to 609.6 108 49,2 127,0159 to 609.6 159 60,3 158,8

219.1 to 609.6 219,1 69,9 219,1267 to 609.6 267 77,8 266,7

323.9 to 609.6 323,9 85,7 323,9368 to 609.6 368 88,9 368,3419 to 609.6 419 93,7 419,1

457.2 to 609.6 457,2 96,8 457,2508 to 609.6 508 101,6 508,0

609,6 609,6 115,9 609,6

Please specify ail header and outlet sizes in any case.


Piping System Cupronickel 90/10Range of Composite Flanges

Composite flanges for Cupronickel 90/10 piping system are based on two components: an o˙ter carbon steel flange and an inner flange (resp. disc for blind flanges) of copper nickel alloy. Three ty-pes of composite flanges for Cupronickel 90/10 piping system are available

• composite slip-on flanges

• composite welding neck flanges

• composite blind flanges

Description

A - SLIP-ON B - WELDING NECK C - BLINDClass 150 Ibs. Class 150 Ibs. Class 150 Ibs.

MATERIAL Outer Flange Carbon Steel Carbon Steel Carbon SteelASTM A 105 galvanised ASTM A 105 galvanised ASTM A 105 galvanised

Inner Flange 90/10 Copper-Nickel 90/10 Copper-Nickel -(BS Alloy CN 102 or (BS Alloy CN 102 orDIN 2.0872) DIN 2.0872)

Disc - - 90/10 Copper-Nickel(BS Alloy CN 102 orDIN 2.0872)

TOLERANCES Outer Flange BS 1560, CI.150 BS 1560 CI.150 BS 1560 CI.150up to 609.6 mm (ANS1 B 16.5) (ANSI B 16.5) (ANSI B 16.5)

Outer Flange - MSS-SP-44 MSS+SP-44up to 609.6 mm

Inner Flange, BS 4504, Part 2 DIN 86037 DIN 86037resp.Disc Table 16/23

(DIN 86036)


Piping System Cupronickel 90/10Range of Composite Flanges

Nominal Flange POD Dia of Flange Diameter No. ofSize Tube Diameter Thickness Thinkness of Disk Bolt(in) Size D K d2(in) b d4 Holes

1 1/2 44,5 127 98,4 5/8 17,5 79 42 57,0 152 120,6 3/4 19,0 96 43 76,1 190 152,4 3/4 23,8 122 43 88,9 216 177,8 3/4 23,8 134 84 108,0 229 190,5 3/4 23,8 158 86 159,0 279 241,3 7/8 25,4 212 88 219,1 343 298,4 7/8 28,6 268 810 267,0 406 362,0 1,0 30,2 320 1212 323,9 483 431,8 1,0 31,8 370 1214 368,0 533 476,2 1 1/8 34,9 430 1216 419,0 597 539,8 1 1/8 36,5 482 1618 457,2 635 577,8 1 1/4 39,1 530 1620 508,0 698 635,4 1 1/4 42,9 585 2024 609,6 813 749,3 1 3/8 47,6 685 2028 711,2 927 863,6 1 3/8 71,4 800 2832 812,8 1060,5 977,9 1 5/8 80,8 905 2836 914,4 1168,4 1085,9 1 5/8 90,4 1000 32

Nominal Inner Flange Outer Flange No. ofSize Tube Size Dimensions Dimensions d2 Bolt(in) d1 d3 d4 h1 h3 D b K d5 (in) Holes

0,5 16,0 21,0 41,0 16,0 5,0 89,0 11,1 60,3 23,0 5/8 4,00,8 25,0 31,0 53,0 16,0 5,0 98,0 12,7 69,8 33,0 5/8 4,01,0 30,0 36,0 63,0 18,0 5,0 108,0 14,3 19,4 38,0 5/8 4,01,3 38,0 45,0 72,0 18,0 5,0 117,0 15,9 88,9 47,0 5/8 4,01,5 44,5 51,0 82,0 19,0 5,0 127,0 17,5 98,4 53,0 5/8 4,02,0 57,0 67,0 99,0 19,0 6,0 152,0 19,0 120,6 69,0 0,8 4,03,0 76,1 87,0 122,0 19,0 6,0 190,0 23,8 152,4 89,0 0,8 4,0

BUILDING-IN SIZES FOR COMPOSITE SLIP-ON FLANGES

BUILDING-IN SIZES FOR COMPOSITE WELDING NECK FLANGES

BBUUIILLDDIINNGG--IINN SSIIZZEESS FFOORR CCOOMMPPOOSSIITTEE BBLLIINNDD FFLLAANNGGEESS

Nominal Inner Flange Dimensions Outer Flange Dimensions No. ofSize Tube b2 bolt(in) Size d3 d4 d6 h1 h2 h3 (min) s2 D b (in) d5 K e Holes

1 30,0 60 32 40 5 3 1,5 2,5 108 14,3 5/8 33 79,4 5 41 1/4 38,0 70 40 40 5 3 1,5 2,5 117 15,9 5/8 42 88,9 5 41 1/2 44,5 80 46 45 6 3 1,5 2,5 127 17,5 5/8 50 98,4 5 42 57,0 102 59 45 6 3 1,5 2,5 152 19,0 3/4 62 120,6 6 43 76,1 122 78 45 6 3 2,0 3,0 190 23,8 3/4 81 152,4 6 43 1/2 88,9 138 91 50 7 3 2,5 3,5 216 23,8 3/4 94 177,8 6 84 108,0 158 110 50 7 3 2,5 3,5 229 23,8 3/4 113 190,5 6 86 159,0 212 161 50 9 3 2,5 3,5 279 25,4 7/8 164 241,3 8 88 219,1 268 221 50 9 3 3,5 5,0 343 28,6 7/8 225 298,4 8 810 267,0 320 269 50 9 3 4,0 5,5 406 30,2 1,0 273 362,0 8 1212 323,9 370 326 50 11 3 5,0 6,5 483 31,8 1,0 330 431,8 8 1214 368,0 430 370 50 11 3 5,5 7,0 533 34,9 1 1/8 374 476,2 8 1216 419,0 482 421 50 12 3 6,0 7,5 597 36,5 1 1/8 426 539,8 8 1618 457,2 530 459 50 12 3 7,0 8,5 635 39,7 1 1/4 465 577,8 8 1620 508,0 585 510 50 12 3 7,5 9,0 698 42,9 1 1/4 517 635,0 8 2024 609,6 685 612 60 14 3 9,0 10,5 813 47,6 1 3/8 619 749,3 8 2028 711,2 800 711 60 19 3 10,5 14,5 927 71,4 1 3/8 727 863,6 8 2832 812,8 905 813 60 20,5 3 12,0 16,0 1060,5 80,8 1 5/8 829 977,9 8 2836 914,4 1000 913 60 22 3 13,5 17,5 1168,4 90,4 1 5/8 931 1085,9 8 32


Piping System Cupronickel 90/10For Sea Water Systems, Offshore Platforms, Desalination Plants, etc.

Basic Property DataCupronickel 90/10is an extremely versatile coppernickel-iron alloy that combines excellent resistance to sea water corrosion with very good fabrication characteristics, good mechanical properties and high ductility. Thealloy contains approx. 10% nickel and small amounts of iron and manganese to improve resistance to flowing sea water and to erosion due to sand carried in the water.

Cupronickel 90/10 is characterised by:Excellent resistance to erosion and impigement attack in flowing sea waterExcellent resistance to stress-corrosion cracking and corrosion fatigueGood resistance to pitting in static sea waterVery good cold working propertiesGood weldabilityVirtual immunity to marine bio-fouling

Chemical Composition

Cupronickel 90/10 is produced to various national specifications which vary slightly in their compostions:

Country Cu Ni Fe Mn C Pb S Zn TotalImpurities

Great Britain min. 10,0 1,0 0,5090/10 Copper-Nickel-Iron remainderCN 102 max. 11,0 2,0* 1,00 0,05 0,01 0,05 0,30

Germany min. 9,0 1,0 0,5CuNi10Fe remainderWerk-St.-Nr. max. 11,0 1,8 1,0 0,05 0,03 0,05 0,5 0,10

U.S.A. min. 9,0 1,090/10 Copper-Nickel 99,51UNS-No. C 70600 max. 11,0 1,8 1,0 0,05 0,02 0,02 0,5 0,10

International Standard min. 9,0 1,0 0,3 Sn+PbISO 429 remainderCuNi10FeMn max. 11,0 2,0 1,0 0,05 0,05 0,05 0,5 0,10

1 Copper plus sum of named elements 99,5% min.* Note: A limited iron content of e.g. 1,5-2,0% is available on application.

Maximum allowable stress values in tension for temperatures not exceeding:

° F 100 150 200 250 300 350 400 450 500 550 600° C 38 66 93 121 149 177 204 232 260 288 316

psi 8700 8300 8100 800 7800 7700 750 7300 7200 7000 6000N/mm2 60 57 56 55 54 53 52 50 49 48 41

ASTM section VII Division I SB 466 Alloy 706 annealed.

Mechanical Data

Typical mechanical data at room temperature. The data refer to Cupronickel 90/10 in the annealed condition.

Standard Condition Yield Tensile ElongationStength Strength A5 A10

0,2%offsetmin. min. min.N/mm2 N/mm2 N/mm2

DIN 17671 F30 annealed 90 290 30 25BS2871Part2 0 annealed 300 30

Physical Constants

Typical physical data at room temperature or as indicated.

Specific Gravity c/cm 8,9Specific Heat J7kg K 377Melting Range ° C 1,100-1,145Thermal Conductivity W/mK 50Coefficient of Iinearexpansion 20-100° C 106/K 17Electrical Resistivity microohm 19Modulus of Elasticityat 20° C G N/m 138


Sea Water Tubes for Shipping and Offshore Construction DIN 1755/1785/17660/17664

Tubes for Condensers and Heatexchangers DIN 1755/1785/17660/17664

CuZn20AL2 CuNi10FeC 68700 C 70600

30 x 1,5 x x30 x 2,0 x x35 x 1,2 x35 x 1,5 x35 x 2,0 x38 x 1,5 x x38 x 2,0 x x42 x 1,5 x x42 x 2,0 x44 x 1,5 x x44 x 2,0 x x57 x 1,5 x x57 x 2,0 x x57 x 2,5 x x76 x 2,0 x x76 x 2,5 x x89 x 2,0 x x89 x 2,5 x x

CuZn20AL2 CuNi10FeC 68700 C 70600

108 x 2,5 x x108 x 3,0 x133 x 2,5 x x133 x 3,0 x x159 x 2,5 x x159 x 3,0 x x194 x 2,5 x x219 x 3,0 x x219 x 3,5 x267 x 3,0 x x267 x 4,0 x x324 x 4,0 x x342 x 5,0 x x368 x 4,0 x x

CuZn20Al CuNi10FeC 68700 C 70600

6 x 1,0 x8 x 1,0 x x10 x 1,0 x x10 x 1,5 x11 x 1,0 x12 x 1,0 x x12 x 1,2 x12 x 1,5 x x14 x 1,0 x x14 x 1,2 x14 x 1,5 x15 x 1,0 x x15 x 1,2 x x15 x 1,5 x16 x 1,0 x x16 x 1,2 x16 x 1,5 x x16 x 2,0 x

CuZn20Al CuNi10FeC 68700 C 70600

18 x 1,0 x18 x 1,2 x x18 x 1,5 x x19 x 1,2 x19 x 1,5 x20 x 1,0 x x20 x 1,5 x x22 x 1,2 x25 x 1,5 x x25 x 2,0 x28 x 1,2 x x28 x 1,5 x x28 x 2,0 x x

We naturally stock all connections as there are: Bends-Flanges-Reducers-Supports-Saddle Studs and Collars in all Sizes.

We can shorten our stock lengths to any required condenser length, keeping to minimum cutting tolerances.


Comparision tables/service temperaturesBoiler and Heatexchanger Tubes

ASTM DIN BS AFNOR JIS GOSTExtremum 17175 3059-3601 NF A 49-213 G 3456 TY-14-3-460-75service 3602-3603 NF A 49-215 G 3458temperature 3604-3606 G 3461

G 3462(USA) (Germany) (U.K.) (France) (Japan) (Russia)

-100° C A 334 Gr 3 503 LT TU 10 N 14- 40° C A 334 Gr 146 430 LT TU 42 BT

A 179 St. 35.8 320 TU 37 C STPT 38A 106 Gr A 360 STB 35A 192A 106 Gr B St. 45.8 430 TU 42 C STPT 42 20

475° C A 210 Gr A1 STB 42A 106 Gr C 17 Mn 44 440 TU 48 C STPT 49A 210 Gr C

19 Mn 5 500 Nb TU 52 C STB 52

15 Mo 3 243 TU 15 D 3500° C A 209 T 1 16 Mo 5 245 STBA 12

A 209 P 1 (VD TÜV) STPA 12STBA 13

550°C A 213 T 2 TU 15 CD 2.05 STBA 20A 335 P 12 STPA 20

560 °C A 213 T 12 13 Cr Mo 44 620-460 TU 13 CD 4.04 STBA 22 15 XMA 335 P 12 STPA 22

575°C A 213 T 11 621 TU 10 CD 5.05 STBA 22A 335 P 11 STPA 23

12 X 1 MFA 213 T 5 625 TU Z 10 CD 05.05 STBA 25A 335 P 5 TU Z 12 CD 05.05 STPA 25

600°C A 213 T 22 10 Cr Mo 9 10 622-490 TU 10 C 9.10 STBA 24A 335 P 22 STPA 24

14 MoV 6315 X 1 M 1 F

625°C A 213 T 9 X 12 Cr Mo 91 629-470 TU Z 10 CD 09 STBA 26A 335 P 9 (VD TÜV) 629-490 STPA 26

A 213 T 91 X 20 Cr Mo V 12 1 762 TU Z 10 CDVNb 09.01650°C A 335 P 91 TU Z 10 CDNbV 09.02


Comparison TablesComparison of ASTM Specifications and Similar Standards

B.S.

Spe

cific

atio

nD

IN S

peci

ficat

ion

ASTM

Spe

cific

atio

n an

d G

rade

JIS

Gra

dean

d G

rade

and

Gra

de

Mar

king

Pipe

Plat

eFo

rgin

gsPi

pePl

ate

Pipe

Pipe

Stee

l Com

posi

tion

Sym

bol

Car

bon

Stee

lW

PAA

106-

AA

285-

BA

105

STPT

38SB

4236

02 S

teel

23

1717

5-St

35.

8

Car

bon

Stee

lW

PBA

106-

BA

515-

65 o

r 70

A10

5ST

PT42

SB42

3602

Ste

el 2

717

175-

St 4

5.8

Car

bon

Stee

lW

PCA

106-

C-

-ST

PT49

SB49

3602

Ste

el 3

5-

Car

bon

Stee

lW

PL6

A33

3 an

d A3

34-6

A51

6-60

A35

0-LF

2ST

PL39

-36

03 S

teel

27

LT30

-

3 1/

2 %

Ni S

teel

WPL

3A

333

and

A334

-3A

203-

DA

350-

LF 3

STPL

46-

3603

Ste

el 5

03 L

T10

0-

Car

bon-

Mol

ybde

num

Ste

elW

P1A

335-

P1A

204-

BA

182-

F1ST

PA12

--

1717

5-15

Mo3

1% C

r- 1/

2% M

olyb

denu

m S

teel

WP1

2A

335-

P12

A38

7-12

A18

2-F

12ST

PA22

-36

04 H

F620

1717

5-15

Mo

3

1 1/

4% C

r- 1/

2% M

olyb

denu

m S

teel

WP1

1A

335-

P11

A38

7-11

A18

2-F1

1ST

PA23

-36

04 H

F621

-

2 1/

4% C

r- 1%

Mol

ybde

num

Ste

elW

P22

A33

5-P2

2A

387-

22A

182-

F22

STPA

24-

3604

HF6

22, 2

717

175-

10 C

rMo

910

5% C

r- 1/

2% M

olyb

denu

m S

teel

WP5

A33

5-P5

A38

7-5

A18

2-F5

STPA

25-

3604

HF6

25-

7% C

r- 1/

2% M

olyb

denu

m S

teel

WP7

A33

5-P7

-A

182-

F7-

--

-

9% C

r- 1%

Mol

ybde

num

Ste

elW

P9A

335-

P9-

A18

2-F9

STPA

26-

--

18%

Cr-

8% N

i Ste

elW

P304

A31

2-TP

304

A24

0 Ty

pe 3

04A

182-

F 30

4SU

S304

TPSU

S304

3605

-801

1744

0-X5

CrN

i 189

18%

Cr-

8% N

i- (0

.04-

0.10

)% C

Ste

elW

P304

HA

312-

TP30

4HA

240

Type

304

A18

2-F

304H

SUS3

04H

TP-

3605

-811

-

18%

Cr-

8% N

i- 0.

035%

C S

teel

WP3

04L

A31

2-TP

304L

A24

0 Ty

pe 3

04L

A18

2-F

304L

SUS3

04LT

PSU

S304

L36

05-8

11L

1744

0-X2

CrN

i 189

22%

Cr-

12%

Ni S

teel

WP3

09A

312-

TP30

9A

240

Type

309

S-

SUS3

09ST

PSU

S309

S-

-

25%

Cr-

20%

Ni S

teel

WP

310

A31

2-TP

310

A24

0 Ty

pe 3

10S

A18

2-F

310

SUS3

10ST

pSU

S310

S36

05-8

05S

-

18%

Cr-

8% N

i-Cb+

Ta S

teel

WP

347

A31

2-TP

347

A240

Typ

e 34

7A

182-

F 34

7SU

S347

TPSU

S347

3605

-822

Nb

1744

0-X5

CrN

iNb

189

18%

Cr-

8% N

i-Mo

Stee

lW

P31

6A

312-

TP31

6A

240

Type

316

A18

2-F3

16SU

S316

TPSU

S 31

636

05-8

4517

440-

X5 C

rNiM

o181

0

18%

Cr-

8% N

i-Mo-

(0.0

4-0.

10)%

C S

teel

WP3

16H

A31

2-TP

316H

A24

0 Ty

pe 3

16A

182-

F316

HSU

S316

HTP

-36

05-8

55-

18%

Cr-

8% N

i-Mo-

0.03

5% C

Ste

elW

P316

LA

312-

TP31

6LA

240

Type

316

LA

182-

F 31

6LTP

SUS3

16LT

PSU

S316

L36

05-8

45L

1744

0-X2

CrN

iMo1

810

18%

Cr-

8% N

i-Ti S

teel

WP3

21A

312-

TP32

1A

240

Type

321

A18

2-F3

21SU

S321

TPSU

S321

3605

-822

Ti17

440-

X10

CrN

iTi1

89

18%

Cr-

8% N

i-Ti-(

0.04

-0.1

0)%

C S

teel

WP3

21H

A312

-TP3

21H

A24

0 Ty

pe 3

21H

A182

-F32

1HSU

S321

HTP

-36

05-8

32Ti

-

18%

Cr-

8% N

i-Cb+

Ta-(0

.04-

0.10

)% C

Ste

elW

P347

HA3

12-T

P347

HA2

40 T

ype

347H

A18

2-F3

47H

SUS3

47H

TP-

3605

-832

Nb

-


Comparison of Mechanical and Chemical Propertiesbetween American, DIN and BS specifications

1) Carbon content varies according to plate thickness. The above figures are for plate up to 1" thick. Also, the analysis shown is that of the heat, and not the product. 2) Number betweenbrackets refers to corresponding Werkstoff number.3) DIN 17177 is based on DIN 17175. The relevant plate specification is DIN 17155.

Mechanical PropertiesSeamless MPA PSI kgf/mm2

Carbon Steel Pipe orN/mm2

Welded

Tensile Yield Tensile Yield Tensile Yield

ASTM A 120 S/W Not specified. Hydraulically tested onlyAPI 5L-A 25 S/W 310 173 45 000 25 000 31.6 17.6BS 1387 S/W Not specified. Hydraulically tested onlySt. 00 (1.0030) 2) DIN 1629 S 324 - 490 46940 - 71120 33.0 - 50.0

DIN 2440/1 S/ERWSt. 33 (1.0033) 2) DIN 1626 W Not specified. Hydraulically tested only

DIN 2440/1 ERW/S

ASTM A 179 S Not specified.St. 35.8 (1.0305) 2) DIN 17175 S 343 - 441 235 49 780 - 64 000 34 135 35.0 - 45.0 24.0BS 3059 Part 1 St.33 S/W 324 - 441 186 47 000 - 63 800 26 900 33.0 - 45.0 19.0ASTM A 214 W Not specified.St. 37.8 (1.0345) 2) DIN 171773) W 343 - 441 226 49 780 - 64 000 32 710 35.0 - 45.0 23.0

ASTM A 53 A S/W 331 207 48 000 30 000 33.8 21.1API 5 L A S/W 330 207 48 000 30 000 33.7 21.1API 5 L A (SAW) W 330 207 48 000 30 000 33.7 21.1BS 3601-360 S/W 360 - 480 215 52 300 - 69 700 31 200 36.7 - 48.9 21.9St. 35 (1.0308) 2) DIN 1629 S 343 - 441 215 - 235 49 780 - 64 000 31 390 - 34 135 35.0 - 45.0 22.0 - 24.0

St. 37 (3.0114) 2) DIN 1626 W 363 - 441 235 52 630 - 64 000 34 140 37.0 - 45.0 24.0

ASTM A 53 B S/W 413 241 60 000 35 000 42.2 24.6API 5 LB S/W 413 241 60 000 35 000 42.2 24.6St. 45 (1.0408) 2) DIN 1629 S 441 - 538 241 - 255 64 000 - 78 255 34 135 - 36 980 45.0 - 55.0 24.0 - 26.0

BS 3601-410 S/W 410 - 530 235 59 600 - 77 000 34 100 41.8 - 54.0 23.9API 5 LB (SAW) . W 413 241 < 60 000 35 000 42.2 24.6St. 42 (1.0134) 2) DIN 1626 W 412 - 539 255 59 740 - 78 230 36 980 42.0 - 55.0 26.0BS 3601-410 (SAW) W 410 - 530 235 59 600 - 77 000 34 100 41.8 - 54.0 23.9

ASTM A 672 A 45 (A 285 Gr. A) W 310 - 379 165 45 000 - 55 000 24 000 31.6 - 36.8 16.8ASTM A 672 A 50 (A 285 Gr. B) W 345 - 414 186 50 000 - 60 000 27 000 35.2 - 42.2 19.0ASTM A 672 A 55 (A 285 Gr. C) W 379 - 448 207 55 000 - 65 000 30 000 38.6 - 45.7 21.1H I (1.0345) 2) DIN 1626 W 343 - 441 226 49 780 - 64 000 32 710 35.0 - 45.0 23.0

ASTM A 106 A S 331 207 48 000 30 000 33.8 21.1St. 35.8 (1.0305) 2) DIN 17175 S 343 - 441 235 49 780 - 64 000 34 135 35.0 - 45.0 24.0BS 3602-23 S/W 355 - 463 208 51 500 - 67 200 30 200 36.2 - 47.2 21.2H I (1.0345) 2) DIN 1626 W 343 - 441 226 49 780 - 64 000 32 710 35.0 - 45.0 23.0

ASTM A 106 B S 414 241 60 000 35 000 42.2 24.6St. 45.8 (1.0405) 2) DIN 17175 S 441 - 538 255 64 000 - 78 225 36 980 45.0 - 55.0 26.0BS 3602-27 S/W 417 - 540 247 60 500 - 78 400 35 800 42.5 - 55.1 25.2ASTM A 672 B 65 (A 515 Gr.65) W 414 - 496 221 60 000 - 72 000 32 000 42.2 - 50.6 22.5H II (1.0425) 2) DIN 1626 W 402 - 490 255 58 320 - 71 120 36 980 41.0 - 50.0 26.0

ASTM A 106 C S 483 276 70 000 40 000 49.2 28.117 Mn 4 (1.0844) 2) DIN 17175 S 460 - 548 274 - 284 66 850 - 79 650 39 825 - 41 280 47.0 - 56.0 28.0 - 29.0BS 3602-35 S/W 540 - 664 309 78 400 - 96 300 44 800 55.1 - 67.7 31.5ASTM A 672 B 70 (A 515 Gr.70) W 448 - 531 241 65 000 - 77 000 35 000 45.7 - 54.1 24.617 Mn 4 (1.0844) 2) DIN 1626 W 460 - 548 274 - 284 66 850 - 79 650 39 825 - 41 280 47.0 - 56.0 28.0 - 29.0

ASTM A 161-LC S 324 179 47 000 26 000 33.04 18.25St 35.8 (1.0305) 2) DIN 17175 S 344 - 441 235 50 000 - 64 000 34 150 35.0 - 45.0 24.0



1) Carbon content varies according to plate thickness. The above figures are for plate up to 1" thick. Also, the analysis shown is that of the heat, and not the product2) Number between brackets refers to corresponding Werkstoff number.3) DIN 17177 is based on DIN 17175. The relevant plate specification is DIN 17155.

Chemical analysis %

C Mn Si S P Cr Ni Mo Ti Nb V

Not specified0.21 0.30-0.60 0.060 0.045

Not specifiedNot specified

Not specified

0.06-0.18 0.27-0.63 0.058 0.0480.17 0.40 0.35 0.050 0.0500.15 0.30-0.70 0.050 0.0500.18 0.27-0.63 0.060 0.0500.16 0.40 0.35 0.050 0.050

0.25 0.95 0.060 0.0500.22 0.90 0.050 0.0400.21 0.90 0.050 0.0400.17 0.40-0.80 0.35 0.050 0.0500.18 0.050 0.050

0.17 0.050 0.050

0.30 1.20 0.060 0.0500.27 1.15 0.050 0.0400.25 0.050 0.050

0.21 0.40-1.20 0.35 0.050 0.0500.26 1.15 0.050 0.0400.23 0.050 0.0500.25 1.20 0.050 0.050

0.17 0.90 0.045 0.0350.22 0.90 0.045 0.0350.28 0.90 0.045 0.0350.16 0.40 0.35 0.50 0.050

0.25 0.27-0.93 0.10 0.058 0.0480.17 0.40 0.35 0.050 0.0500.20 0.40-0.70 0.35 0.050 0.0500.16 0.40 0.35 0.050 0.050

0.30 0.29-1.06 0.10 0.058 0.0480.22 0.45 0.10-0.35 0.050 0.0500.25 0.40-0.70 0.35 0.050 0.0500.24 0.90 0.15-0.30 0.040 0.0350.20 0.50 0.35 0.050 0.050

0.35 0.29-1.06 0.10 0.058 0.0480.14-0.20 0.90-1.20 0.20-0.40 0.050 0.050

0.35 0.70-1.10 0.050 0.0500.28 0.90 0.15-0.30 0.040 0.035

0.14-0.20 0.90-1.20 0.20-0.40 0.050 0.050

0.10-0.20 0.30-0.80 0.25 0.058 0.0480.17 0.40 0.35 0.050 0.050



Carbon Steel Pipe orN/mm2

WeldedTensile Yield Tensile Yield Tensile Yield

A B A B A B


1) For grades X65 and below each reduction in the maximum specified carbon content of 0.01 percent, allows an increase of 0.05 percent in the maximum specified manganese content up to 1.45percent.

2) For cold-expanded seamless pipe in sizes 20 inch and larger the maximum carbon content shall be 0.28 percent..3) Other chemical analyses may be furnished by agreement between purchaser and manufacturer.4) Either columbium, vanadium, titanium or a combination thereof, shall be used at the discretion of the manufacturer.5) For grades X65 in sizes 16 inch and larger with wallthickness 0.500 inch and less the chemical composition shall be as shown or as agreed between manufacturer and customer.

For other sizes and wallthicknesses the chemical composition shall be as agreed by manufacturer and customer.6) Either columbium or vanadium or a combination of both shall be used at the discretion of the manufacturer.7) Each reduction of the specified maximum carbon content by 0.01 percent allows an increase of 0.05 percent in the maximum specified manganese content.8) The minimum tensile strength for grade X60 electric-resistance welded pipe shall be 75000 psi (52,7 kg/mm2).9) For pipe less than 20 inch OD with any wallthickness and for pipe 20 inch OD and Iarger with wallthickness greater than 0.375 inch.10) For pipe 20 inch OD and Iarger with wallthickness 0.375 inch and less.11) At the manufacturer's discretion.12) Number between brackets refers to corresponding Werkstoff number.

API 5 LX-X 42 414 289 60000 42000 42.2 29,5non exp. or cold exp. Snon exp. Wcold exp. WSt.43.7(1.0484) 12) DIN 17172 S/W 421-538 294 61160- 43670 43.0-55.0 30.0

78225BS 4360-43 D hollow sections S/W 430 255 62300 37000 43,8 26.0

API 5 LX-X 46 434 317 63000 46000 44.3 32.3non exp. Scold exp. Snon exp. Wcold exp. WSt.47.7(1.0409) 12) DIN 17172 S/W 460-578 323 66850- 46940 47.0-59.0 33.0

83920

API 5 LX-X 52 455 9) 496 10) 359 66000 9) 72000 10) 52000 46.4 9) 50.6 10) 36.6non exp. Scold exp. Snon exp. Wcold exp. WSt.63.7(1.0582) 12) DIN 17172 S/W 509-626 362 73960- 52625 52.0-64.0 37.0

91000BS 4360-50 D hollow sections S/W 490 355 71100 51600 50.0 36.2

API 5 LX-X 56 3)non exp. or cold exp. S 489 9) 517 10) 384 71000 9) 75000 10) 56000 49.9 9) 52.7 10) 39.2non exp. or cold exp. WSt.53.7 (1.8970/1) 12) DIN 17172 S/W 529-676 387 76800- 56180 54.0-69.0 39.5

98140

API 5 LX-X 60 3) 8)non exp. or cold exp. S 517 9) 537 10) 414 75000 9) 78000 10) 60000 52.7 9) 54.8 10) 42.2non exp. or cold exp. WSt.60.7 (1.8972/3) 12) DIN 17172 S/W 549-706 412 79650- 59740 56.0-72.0 42.0

102410

API 5 LX-X 65 5)non exp. or cold exp. S 531 9) 551 10) 448 77000 9) 80000 10) 65000 54.1 9) 56.2 10) 45.7non exp. or cold exp. WBS 4360-55 C hollow sections S/WBS 4360-55 E hollow sections S/W 550 450 79900 65400 56.1 45.9

API 5 LX-X 70 3)non exp. or cold exp. Snon exp. or cold exp. W 565 482 82000 70000 57.6 49.2



1) For grades X65 and below each reduction in the maximum specified carbon content of 0.01 percent, allows an increase of 0.05 percent in the maximum specified manganese content up to 1.45percent.

2) For cold-expanded seamless pipe in sizes 20 inch and larger the maximum carbon content shall be 0.28 percent..3) Other chemical analyses may be furnished by agreement between purchaser and manufacturer.4) Either columbium, vanadium, titanium or a combination thereof, shall be used at the discretion of the manufacturer.5) For grades X65 in sizes 16 inch and larger with wallthickness 0.500 inch and less the chemical composition shall be as shown or as agreed between manufacturer and customer.

For other sizes and wallthicknesses the chemical composition shall be as agreed by manufacturer and customer.6) Either columbium or vanadium or a combination of both shall be used at the discretion of the manufacturer.7) Each reduction of the specified maximum carbon content by 0.01 percent allows an increase of 0.05 percent in the maximum specified manganese content.8) The minimum tensile strength for grade X60 electric-resistance welded pipe shall be 75000 psi (52,7 kg/mm2).9) For pipe less than 20 inch OD with any wallthickness and for pipe 20 inch OD and Iarger with wallthickness greater than 0.375 inch.10) For pipe 20 inch OD and Iarger with wallthickness 0.375 inch and less.11) At the manufacturer's discretion.12) Number between brackets refers to corresponding Werkstoff number.

0.29 1.25 0.05 0.040.28 1.25 0.05 0.040.28 1.25 0.05 0.04

0.22 0.50-1.10 0.40 0.04 0.045

0.21 1.20 0.40 0.05 0.05

0.31 1.35 0.05 0.040.29 2) 1.25 0.05 0.04

0.30 1.35 0.05 0.040.28 1.25 0.05 0.04

0.22 0.70-1.30 0.20-0.45 0.04 0.045

0.31 1.35 0.05 0.040.29 2) 1.25 0.05 0.04

0.30 1.35 0.05 0.040.28 1.25 0.05 0.04

0.22 0.90-1.30 0.25-0.55 0.04 0.045

0.20 1.40 0.40 0.04 0.04 0.10 0.10

0.26 1.35 0.05 0.04 0.03 4) 0.005 4) 0.02 4)0.26 1.35 0.05 0.04 0.03 4) 0.005 4) 0.02 4)

0.26 1.00-1.30 0.25-0.55 0.04 0.045 11) 11) 11)

0.26 1.35 0.05 0.04 0.03 4) 0.005 4) 0.02 4)0.26 1.35 0.05 0.04 0.03 4) 0.005 4) 0.02 4)

0.23 1.00-1.50 0.55 0.035 0.04 11) 11) 11)

0.26 1.40 0.05 0.04 0.005 6) 0.02 6)

0.25 1.50 0.40 0.04 0.04 0.10 0.20

0.23 1.60 7) 0.05 0.04

Chemical analysis %

C 1) Mn 1) Si S P Cr Ni Mo Ti Nb V



ASTM A 333-1 S/ERW 379 207 55000 30000 38,6 21.1TT St 36 N (1.0356) 1) W.-St.-Blatt 680-70 S/W 343-441 225 49780-64000 32710 35.0-45.0 23.0BS 3603-27 LT 30 S 417-540 247 60500-78400 35800 42.5-55.1 25.2ASTM A 671 CC 60 (A 516 Gr.60) EFW 379-448 207 55000-65000 30000 38.6-45.7 21.1

ASTM A 333-3 S/ERW 448 241 65000 35000 45.7 24.610 Ni 14 (1.5637) 1) W.-St.-Blatt 680-70 S/W 440-636 343 64000-92450 49780 45.0-65.0 35.0BS 3603-503 LT 100 S 448 255 65000 37000 45.7 26.0ASTM A 671 CF 66 (A 203 Gr. D) EFW 448-531 255 65000-77000 37000 45.7-54.1 26.0

ASTM A 333-6 S/ERW 414 241 60000 35000 42.2 24.6TT St. 45 N (1.0456) 1) W.-St.-Blatt 680-70 S/W 441-538 245 64000-78225 35560 45.0-55.0 25.0BS 3603-27 LT 50 S 417-540 247 60500-78400 35800 42.5-55.1 25.2ASTM A 671 CC 60 (A 516 Gr.60) EFW 379-448 207 55000-65000 30000 38.6-45.7 21.1

ASTM A 333-8 S/ERW 689 517 100000 75000 70.3 52,75X 8 Ni 9(1.5662) 1) W.-St.-Blatt 680-70 S/W 636-832 490 92450-120900 71115 65.0-85.0 50.0


1) Number between brackets refers to the corresponding Werkstoff number.2) Carbon and manganese contents vary according to the plate thickness.

For the purposes of this table the figures used relate to the thinnest plate range.Also, the analysis shown is that of the heat and not the product.

Mechanical PropertiesSeamless MPA PSI kgf/mm

2

Low-Temperature Pipe or1 N/mm2

Welded


0.30 0.40-1.06 0.06 0.0500.16 0.40-0.60 0.10-0.35 0.045 0.0450.25 0.30-0.70 0.050 0.0500.18 0.60-0.90 0.15-0.30 0.04 0.035

0.19 0.31-0.64 0.18-0.37 0.05 0.050 3.18-3.820.12 0.30-0.60 0.10-0.35 0.035 0.035 3.20-3.800.15 0.30-0.60 0.10-0.35 0.040 0.040 0.030 3.25-3.750.17 0.70 0.15-0.30 0.040 0.035 3.25-3.75

0.30 0.29-1.06 0.10 0.058 0.0480.22 0.45 0.35 0.045 0.0450.20 0.90-1.20 0.10-0.20 0.050 0.0500.18 0.60-0.90 0.15-0.30 0.04 0.035

0.13 0.90 0.13-0.32 0.045 0.045 8.40-9.600.10 0.30-0.80 0.10-0.35 0.035 0.035 8.00-10.00


1) Number between brackets refers to the corresponding Werkstoff number.2) Carbon and manganese contents vary according to the plate thickness.

For the purposes of this table the figures used relate to the thinnest plate range.Also, the analysis shown is that of the heat and not the product.

Chemical analysis %

C 2) Mn 2) Si S P Cr Ni Mo Ti Nb V



1) The analysis shown is that of the heat and not of the product.2) No exact equivalents are available in BS or DIN for the american minimum wall specifications.(i. e. T 5 etc....)3) Number between brackets refers to corresponding Werkstoff number.4) DIN 17155 covers the specifications for boiler plate. The technical requirements tor the welded pipe are covered by DIN 17175.5) The relevant plate specifications are not jet officially approved.

SeamlessMechanical Properties

Alloy Steel Pipeor MPA 1 N/mm 2 PSI kgf / mm2

Welded


ASTM A 161 - T 1 S > 379 > 207 > 55000 > 30000 > 38,65 > 21,11

ASTM A 200 - T 5 S > 414 > 172 > 60000 > 25000 > 42,22 > 17,54

ASTM A 200 - T 7 S > 414 > 172 > 60000 > 25000 > 42,22 > 17,54

ASTM A 200 - T 9 S > 414 > 172 > 60000 > 25000 > 42,22 > 17,54

ASTM A 200 - T 11 S > 414 > 172 > 60000 > 25000 > 42,22 > 17,54

ASTM A 200 - T 22 S > 414 > 172 > 60000 > 25000 > 42,22 > 17,54

ASTM A 335 - P 1 S > 379 > 207 > 55000 > 30000 > 38,65 > 21,11

15 MO 3 (1,5415) ) DIN 17175 S 441-538 > 284 64000- > 41250 45-55 > 29,0

ASTM A 691 CM 65 8A 204 Gr. A) W 448-531 > 255 65000- >37000 45,68- > 26,00

77000 54,15

15 MO 3 (1,5415) ) DIN 171775 W 441-538 >284 64000- > 41250 45-55 > 29,0

ASTM A 335 -P 5 S > 414 > 207 > 60000 > 30000 > 42,22 > 21,11

12 CrMo 195 (G) (1,7362) ) W.-St.-Bl. 590/61 S/W > 413 > 176 > 60000 > 25580 > 42,2 > 18,0

BS 3604-625 S/W > 417 > 208 > 60480 > 30240 > 42,52 > 21,21

ASTM A 691-5 Cr (A 387 Gr. 5) W 517-689 > 320 75000- > 45000 52,72 > 31,61

100000 70,26

ASTM A 335 - P 7 S > 414 > 207 > 60000 > 30000 > 42,22 > 21,11

X 12 CrMo 7 (1,7368) ) W.-St.-Bl. 590/61 S/W > 413 > 176 > 60000 > 25580 > 42,2 > 18,0

ASTM A 335 - P 9 S > 414 > 207 > 60000 > 30000 > 42,22 > 21,11

X 12 CrMo 9 1 (1,7386) ) W.-St.-Bl. 590/61 S/W > 413 > 176 > 60000 > 25580 > 42,2 > 18,0

ASTM A 335 P 11 S > 414 > 207 > 60000 > 30000 > 42,22 > 21,11

13 CrMo 44 (1,7335) ) DIN 17175 S 441-568 >294 64000- >42670 45-58 > 30,0

BS 3604-621 S/W > 417 > 232 > 60480 > 33600 > 42,52 > 23,66

ASTM A 691-11/4 Cr (A 387 Gr. 11) class 1 W 414-586 >241 60000- > 35000 42,22- >24,58

85000 59,76

class 2 W 517-655 > 310 75000- > 45000 52,72 >31,61

95000 66,19

13 CrMo 44 (1,7335) ) DIN 171554) W 431-548 >304 62600- > 44100 44-56 > 31,0

ASTM A 335 - P 12 S > 414 > 207 > 60000 > 30000 > 42,22 > 21,11

13 CrMo 44 (1,7335) ) DIN 17175 S 441-568 > 294 64000- > 42670 45-58 > 30,0

BS 3604-620 S/W > 417 > 232 > 60480 > 33600 > 42,52 > 23,65

ASTM A 691 - 1 Cr (A 387 Gr. 12) class 1 W 379-552 > 228 55000- > 33000 38,65- > 23,25

80000 56,29

class 2 W 448-586 > 276 65000- > 40000 45,68- > 28,14

13 CrMo 44 (1,7335) ) DIN 171554) W 431-548 > 304 63600- > 44100 44-56 > 31,0

ASTM A 335 - P 22 S > 414 > 207 > 60000 > 30000 > 42,22 > 21,11

10 CrMo 910 (1,7380) ) DIN 17175 S 441-587 > 264 64000- > 38400 45-60 > 27,0

BS 3604-622 annealed S/W > 417 > 232 > 60480 > 33600 > 42,52 > 23,66

BS 3604-622 normalized + tempered S/W > 479 > 262 > 69440 > 38080 > 48,84 > 26,72

ASTM A 691 - 2 1/4 Cr (A 387 Gr. 22) class 1 W 414-586 > 207 60000- > 30000 42,22- > 21,11

class 2 W 517-689 > 310 75000- > 45000 52,72 > 31,61

14 Mo V 63 (1,7715) ) DIN 17175 S > 463 > 343 71100- > 49780 50-65 > 35,0

BS 3604 - 660 S/W > 463 > 293 > 67200 > 42560 > 47,22 > 29,88

14 Mo V 63 (1,7715) ) DIN 171554) W > 463 > 343 71100- > 49780 50-65 > 35,0

ASTM A 213 - T 5 S > 414 > 207 > 60000 > 30000 > 42,22 > 21,11

ASTM A 213 - T 7 S > 414 > 207 > 60000 > 30000 > 42,22 > 21,11

ASTM A 213 - T 9 S > 414 > 207 > 60000 > 30000 > 42,22 > 21,11

ASTM A 213 - T 11 S > 414 > 207 > 60000 > 30000 > 42,22 > 21,11

ASTM A 213 - T 12 S > 414 > 207 > 60000 > 30000 > 42,22 > 21,11

BS 3059-620 S/W 440-618 > 232 63840-89600 > 33600 44,87-63,08 > 23,66

ASTM A 213 - T 22 S > 414 > 207 > 60000 > 30000 > 42,22 > 21,11

BS 3059-622-50 S 494-648 > 262 71680- > 38080 50,37- > 26,72

94080 66,08



1) The analysis shown is that of the heat and not of the product.2) No exact equivalents are available in BS or DIN for the american minimum wall specifications.(i. e. T 5 etc....)3) Number between brackets refers to corresponding Werkstoff number.4) DIN 17155 covers the specifications for boiler plate. The technical requirements tor the welded pipe are covered by DIN 17175.5) The relevant plate specifications are not jet officially approved.

Chemical analysis %


0.10-0.20 0.30-0.80 0.10-0.50 0.045 0.045 0.44-0.65

0.15 0.30-0.60 0.50 0.030 0.030 4.00-6.00 0.45-0.65

0.15 0.30-0.60 0.50-1.00 0.030 0.030 6.00-8.00 0.45-0.65

0.15 0.30-0.60 0.25-1.00 0.030 0.030 8.00-10.00 0.90-1.10

0.15 0.30-0.60 0.50-1.00 0.030 0.030 1.00-1.50 0.44-0.65

0.15 0.30-0.60 0.50 0.030 0.030 1.90-2.60 0.87-1.13

0.10-0.20 0.30-0.80 0.10-0.50 0.045 0.045 0.44-0.650.12-0.20 0.50-0.80 0.15-0.35 0.040 0.040 0.25-0.35

0.18 0.90 0.15-0.30 0.040 0.035 0.45-0.65 1)

0.12-0.20 0.50-0.80 0.15-0.35 0.040 0.040 0.25-0.35

0.15 0.30-0.60 0.50 0.030 0.030 4.00-6.00 0.45-0.650.15 0.30-0.60 0.50 0.030 0.030 4.00-6.00 0.45-0.65 1)0.15 0.40-0.70 0.50 0.040 0.040 4.00-6.00 0.45-0.65 1)0.15 0.30-0.60 0.50 0.030 0.030 4.00-6.00 0.45-0.65 1)

0.15 0.30-0.60 0.50-1.00 0.030 0.030 6.00-8.00 0.44-0.650.15 0.30-0.60 0.50-1.00 0.030 0.030 6.00-8.00 0.45-0.65

0.15 0.30-0.60 0.25-1.00 0.030 0.030 8.00-10.00 0.90-1.100.15 0.30-0.60 0.25-1.00 0.030 0.030 8.00-10.00 0.90-1.10

0.15 0.30-0.60 0.50-1.00 0.030 0.030 1.00-1.50 0.44-0.650.10-0.18 0.40-0.70 0.15-0.35 0.040 0.040 0.70-1.00 0.40-0.50

0.15 0.30-0.60 0.50-1.00 0.040 0.040 1.00-1.50 0.45-0.650.17 0.40-0.65 0.50-0.80 0.035 0.040 1.00-1.50 0.45-0.65 1)

0.17 0.40-0.65 0.50-0.80 0.035 0.040 1.00-1.50 0.45-0.65 1)

0.10-0.18 0.40-0.70 0.15-0.35 0.040 0.040 0.70-1.00 0.40-0.50

0.15 0.30-0.61 0.50 0.045 0.045 0.80-1.25 0.44-0.650.15 0.40-0.70 0.15-0.35 0.040 0.040 0.70-1.00 0.40-0.50

0.15 0.40-0.70 0.10-0.35 0.040 0.040 0.70-1.10 0.45-0.650.17 0.40-0.65 0.15-0.30 0.035 0.040 0.80-1.15 0.45-0.60 1)

0.17 0.40-0.65 0.15-0.30 0.035 0.040 0.80-1.15 0.45-0.60 1)

0.10-0.18 0.40-0.70 0.15-0.35 0.040 0.040 0.70-1.00 0.40-0.50

0.15 0.30-0.60 0.50 0.030 0.030 1.90-2.60 0.87-1.130.15 0.40-0.60 0.15-0.50 0.040 0.040 2.20-2.50 0.90-1.10

0.08-0.15 0.40-0.70 0.50 0.040 0.040 2.00-2.50 0.90-1.20 1)0.08-0.15 0.40-0.70 0.50 0.040 0.040 2.00-2.50 0.90-1.20 1)

0.15 0.30-0.60 0.50 0.040 0.035 2.00-2.50 0.90-1.10 1)

0.15 0.30-0.60 0.50 0.040 0.035 2.00-2.50 0.90-1.10 1)

0.10-0.18 0.30-0.60 0.15-0.35 0.040 0.040 0.30-0.60 0.50-0.65 0.25-0.35

0.15 0.40-0.70 0.10-0.35 0.040 0.040 0.25-0.50 0.50-0.70 0.22-0.280.10-0.18 0.30-0.60 0.15-0.35 0.040 0.040 0.30-0.60 0.50-0.65 0.25-0.35

0.15 0.30-0.60 1.00-2.00 0.03 0.03 4.00-6.00 0.45-0.65

0.15 0.30-0.60 0.50-1.00 0.03 0.03 6.00-8.00 0.45-0.65

0.15 0.30-0.60 0.25-1.00 0.03 0.03 8.00-1.00 0.90-1.10

0.15 0.30-0.60 0.50-1.00 0.03 0.03 1.00-1.50 0.44-0.65

0.15 0.30-0.60 0.50 0.045 0.045 0.80-1.25 0.44-0.650.10-0.15 0.40-0.70 0.10-0.35 0.040 0.040 0.70-1.10 0.45-0.65

0.15 0.30-0.60 0.50 0.030 0.030 1.90-2.60 0.87-1.130.08-0.15 0.40-0.70 0.50 0.040 0.040 2.00-2.50 0.90-1.20


1) For small diameter tubes and /or thin walls where many passes are required a carbon content of 0.40 percent is necessary in grades TP 304 L and TP 316 L.Small diameters are: 0.500" or 12.7 mm and below. Light wallthicknesses are: 0.049" or 1,24 mm and below for average walls and 0.044" or 1,12 mm for minimum walls.

2) In the above table the "Yield" figure is determined for ASTM standards by 0.2 % proof stress calculation, and for BS standards by 1.0 % proof stress.3) Number between brackets refers to the corresponding Werkstoff number.4) For werkstoff-numbers 1.4401 (= TP 316 and TP 316 H) and 1.4404 (= TP 316 L) following alternative werkstoff-numbers are acceptable: 1.4436 and 1.4435.

Only Mo- and Ni-values (Mo = 2.50-3.00 %; Ni =12.50-15.00 %) deviate.

Tensile Yield 2) Tensile Yield Tensile Yield

ASTM A 312-TP 304 S/ERW >517 >207 >75000 >30000 >53.0 >21.0X 5 CrNi 189 (1.4301) 3) DIN 17440 S/ERW/EFW 490-685 >186 71115-99560 >27020 50.0-70.0 >19.0BS 3605-304-S 18 S 490-690 >235 71200-100200 >34100 50.1-70.4 >24.0ASTM A 358-TP 304 (A 240-TP 304) EFW >517 >207 >75000 >30000 >53.0 >21.0BS 3605-304-S 25 W (ERW/EFW) 490-690 >235 71200-100200 >34100 50.1-70.4 >24.0

ASTM A 312-TP 304 H S/ERW >517 >207 >75000 >30000 >53.0 >21.0X 5 CrNi 189 (1.4301 ) 3) DIN 17440 S/ERW/EFW 490-685 >186 71115-99560 >27020 50.0-70.0 >19.0

ASTM A 312-TP 304 L S/ERW >483 >172 >70000 >25000 >49.0 >17.5X 2 CrNi 189(1.4306) 3) DIN 17440 S/ERW/EFW 440-685 >176 64000-99560 >25600 45.0-70.0 >18.0BS 3605-304-S 14 S 490-690 >205 71200-100200 >29800 50.1-70.4 >20.9ASTM A 358-TP 304 L (A 240-TP 304 L) EFW >483 >172 >70000 >25000 >49.0 >17.6BS 3605-304-S 22 W (ERW/EFW) 490-690 >205 71200-100200 >29800 50.1-70.4 >20.9

ASTM A 312-TP 310 S/ERW >517 >207 >75000 >30000 >53.0 >21.0X 15 CrNiSi 2520 (1.4841 ) 3) W.-St.-BI. 470-60 S/ERW/EFW 588-734 >294 85720-106670 >42860 60.0-75.0 >30.0ASTM A 358-TP 310 (A 240-TP 310 S) EFW >517 >207 >75000 >30000 >53.0 >21.0

ASTM A 312-TP 316 S/ERW >517 >207 >75000 >30000 >53.0 >21.0X 6 CrNiMo 1810 (1.4401) 3) 4) DIN 17440 S/ERW/EFW 490-685 >207 71115-99560 >30000 50.0-70.0 >21.0BS 3605-316-S 18 S 510-710 >245 74100-103100 >35600 52.1-72.5 >25.0ASTM A 368-TP 316(A 240-TP 316) EFW >517 >207 >75000 >30000 >53.0 >21.0BS 3605-316-S 26 W(ERW/EFW) 510-710 >245 74100-103100 >35600 52.1-72.5 >25.0

ASTM A 312-TP 316 H S/ERW >517 >207 >75000 >30000 >53.0 >21.0X 6 CrNiMo 1812 (1.4401) 3) 4) DIN 17440 S/ERW/EFW 490-685 >207 71115-99560 >30000 50.0-70.0 >21.0

ASTM A 312-TP 316 L S/ERW >483 >172 >70000 >25000 >49.0 >12.5X 2 CrNiMo 1810 (1.4404) 3) 4) DIN 17440 S/ERW/EFW 441-685 >196-207 64000-99560 >28450 45.0-70.0 >20.0BS 3605-316-S 14 S 490-690 >215 71200-100200 >31200 50.1-70.4 >21.9ASTM A 358-TP 316 L (A 240-TP 316 L) EFW >183 >172 >70000 >25000 >49.0 >17.5BS 3605-316-S 22 W (ERW/EFW) 490-690 >215 71200-100200 >31200 50.1-70.4 >21.9

ASTM A 312-TP 321 S/ERW >517 >207 >75000 >30000 >53.0 >21.0

10 CrNiTi 189 (1.4541) 3) DIN 17440 S/ERW/EFW 490-734 >207 71115-106670 >30000 50.0-75.0 >21.0BS 3605-321-S 18 S 510-710 >235 74100-103100 >34100 52.1-72.5 >24.0

ASTM A 358-TP 321(A 240-TP 321) EFW >517 >207 >75000 >30000 >53.0 >21.0

BS 3605-321-S 22 W (ERWJEFW) 510-710 >235 74100-103100 >34100 52.1-72.5 >24.0

ASTM A 312-TP 321 H S/ERW >517 >207 >75000 >30000 >53.0 >21.0

X 10 CrNiTi 189(1.4541) 3) DIN 17440 S/ERW/EFW 490-734 >207 71116-106670 >30000 50.0-75.0 >21.0

ASTM A 312-TP 347 S/ERW >517 >207 >75000 >30000 >53.0 >21.0

10 CrNiNb 189 (1.4550) 3) DIN 17440 S/ERW/EFW 490-734 >207 71116-106670 >30000 50.0-75.0 >21.0BS 3605-347-S 18 S 510-710 >245 74100-103100 >35600 52.1-72.5 >25.0

ASTM A 358-TP 347(A 240-TP 347) EFW >517 >207 >75000 >30000 >53.0 >21.0

BS 3605-347-S 17 W (ERW/EFW) 510-710 >245 74100-103100 >35600 52.1-72.5 >25.0

ASTM A 312-TP 347 H S/ERW >517 >207 >75000 >30000 >53.0 >21.0

X 10 CrNiNb 189 (1.4550) 3) DIN 17440 S/ERW/EFW 490-734 >207 71116-106670 >30000 50.0-75.0 >21.0


Stainless Steel orN/mm2

Welded




1) For small diameter tubes and /or thin walls where many passes are required a carbon content of 0.40 percent is necessary in grades TP 304 L and TP 316 L.Small diameters are: 0.500" or 12.7 mm and below. Light wallthicknesses are: 0.049" or 1,24 mm and below for average walls and 0.044" or 1,12 mm for minimum walls.

2) In the above table the "Yield" figure is determined for ASTM standards by 0.2 % proof stress calculation, and for BS standards by 1.0 % proof stress.3) Number between brackets refers to the corresponding Werkstoff number.4) For werkstoff-numbers 1.4401 (= TP 316 and TP 316 H) and 1.4404 (= TP 316 L) following alternative werkstoff-numbers are acceptable: 1.4436 and 1.4435.

Only Mo- and Ni-values (Mo = 2.50-3.00 %; Ni =12.50-15.00 %) deviate.

Chemical analysis %


<0.08 <2.00 <0.75 <0.030 <0.040 18.00-20.00 8.00-11.00<0.7 <2.00 <1.00 <0.030 <0.045 17.00-20.00 9.00-11.50<0.06 0.50-2.00 0.20-1.00 <0.030 <0.040 17.00-19.00 9.00-12.00<0.08 <2.00 <1.00 <0.030 <0.045 18.00-20.00 8.00-10.50<0.06 0.50-2.00 0.20-1.00 <0.030 <0.040 17.00-19.00 8.00-11.00

0.04-0.10 <2.00 <0.75 <0.030 <0.040 18.00-20.00 8.00-11.00<0.7 <2.00 <1.00 <0.030 <0.045 17.00-20.00 9.00-11.50

<0.035 <2.00 <0.75 <0.030 <0.040 18.00-20.00 8.00-13.00<0.03 <2.00 <1.00 <0.030 <0.045 17.00-20.00 10.00-12.50<0.030 0.50-2.00 0.20-1.00 <0.030 <0.040 17.00-19.00 10.00-13.00<0.030 <2.00 <1.00 <0.030 <0.045 18.00-20.00 8.00-12.00<0.030 0.50-2.00 0.20-1.00 <0.030 <0.040 17.00-19.00 9.00-12.00

<0.15 <2.00 <0.75 <0.030 <0.040 24.00-26.00 19.00-22.00<0.20 <2.00 ~2.05 - - ~25.00 ~ 20.00<0.08 <2.00 <1.50 <0.030 <0.045 24.00-26.00 19.00-22.00

<0.08 <2.00 <0.75 <0.030 <0.040 16.00-18.00 11.00-14.00 2.00-3.00<0.07 <2.00 <1.00 <0.030 <0.045 16.50-18.50 10.50-13.50 2.00-2.50<0.07 0.50-2.00 0.20-1.00 <0.030 <0.040 16.00-18.50 11.00-14.00 2.00-3.00<0.08 <2.00 <1.00 <0.030 <0.045 16.00·18.00 10.00-14.00 2.00-3.00<0.07 0.50-2.00 0.20-1.00 <0.030 <0.040 16.00-18.50 11.00-14.00 2.00-3.00

0.04-0.10 <2.00 <0.75 <0.030 <0.040 16.00-18.00 11.00-14.00 2.00-3.00<0.07 <2.00 <1.00 <0.030 <0.045 16.50-18.50 12.00-14.50 2.50-3.00

<0.035 1) <2.00 <0.75 <0.030 <0.040 16.00-18.00 10.00-15.00 2.00-5.00<0.03 <2.00 <1.00 <0.030 <0.045 16.50-18.50 11.00-14.00 2.00-5.00<0.030 0.50-2.00 0.20-1.00 <0.030 <0.040 16.00-18.50 12.00-15.00 2.00-3.00<0.030 <2.00 <1.00 <0.030 <0.045 16.00·18.00 10.00-14.00 2.00-3.00<0.030 0.50-2.00 0.20-1.00 <0.030 <0.040 16.00-18.50 11.00-14.00 2.00-3.00

<0.08 <2.00 <0.75 <0.030 <0.040 17.00-20.00 9.00-13.00 > 5 x C < 0.60%

<0.10 <2.00 <1.00 <0.030 <0.045 17.00-19.00 9.00-11.50 > 5 x % C<0.08 0.50-2.00 0.20-1.00 <0.030 <0.040 17.00-19.00 10.00-13.00 > 5 x C

<0.60%

<0.08 <2.00 <1.00 <0.030 <0.045 17.00-19.00 9.00-12.00 > 5 x C< 0.70%

<0.08 0.50-2.00 0.20-1.00 <0.030 <0.040 17.00-19.00 9.00-12.00 > 5 x C<0.60%

0.04-0.10 <2.00 <0.75 <0.030 <0.040 17.00-20.00 9.00-13.00 > 4 x C< 0.60%

<0.10 <2.00 <1.00 <0.030 <0.045 17.00-19.00 9.00-11.50 > 5 x % C

<0.08 <2.00 <0.75 <0.030 <0.040 17.00-20.00 9.00-13.00 > 10 x C< 1.00%

<0.10 <2.00 <1.00 <0.030 <0.045 17.00-19.00 9.00-11.50 >8 x % C<0.08 0.50-2.00 0.20-1.00 <0.030 <0.040 17.00-19.00 10.00-13.00 >10 x C

>20 x C

<0.08 <2.00 <1.00 <0.030 <0.045 17.00-19.00 9.00-13.00 > 10 x C<1.10 %

<0.08 0.50-2.00 0.20-1.00 <0.030 <0.040 17.00-19.00 9.00-12.00 >10 x C<1.00 %

0.40-0.10 <2.00 <0.75 <0.030 <0.040 17.00-20.00 9.00-13.00 >8 x C<1.00 %

<0.10 <2.00 <1.00 <0.030 <0.045 17.00-19.00 9.00-11.50 >8 x % C


Coefficient of Thermal Expansion

Specific Heat

Electrical Resistivity

German and Mean Coefficient of Thermal Expansion x 10--66

for Temperature RangeBritish Standards Steel Grade °C 20-100 20-200 20-300 20-400 20-500 20-600 20-700

Carbon Steel

BS 3059 Pt1 320BS 3059 Pt2 360, 440BS 3601 320, 360, 410 On unitBS 3602 Pt1 360, 410, 460, 490Nb length/°C 12,0 12,7 13,3 13,8 14,2 14,6BS 3606 320, 400, 440

Alloy Steel

BS 3059 Pt2 243, 620, 622-490BS 3604 620-460, 620-440,

621, 622, 625, 660 12,0 12,7 13,3 13,8 14,2 14,6 14,7BS 3606 243, 245, 261, 620

621, 622, 625

BS 3604 660 12,0 12,5 13,0 13,5 14,0 14,2

BS 3059 Pt2 629-470, 629-590, BS 3604 762 10,7 11,2 11,6 11,9 12,2 12,5

Specific Heat Capacity in Temperature RangeBritish Standards Steel Grade °C 20-100 20-200 20-300 20-400 20-500 20-600 20-700

Carbon Steel

BS 3059 Pt1 320 J/(kgK) 490 510 535 560BS 3601 320

BS 3059 Pt2 360, 440BS 3601 360, 410BS 3602 Pt1 360, 410, 460, 490Nb J/(kgK) 490 511 532 561 586 611BS 3602 Pt2 410, 460BS 3606 320, 400, 440

Alloy Steel

BS 3059 Pt2 243, 620, 622-490629-470,629-590,762

BS 3604 620-460, 620-440,621, 622, 625 J/(kgK) 480 503 524 545 572 602 644629-470,629-590,762

BS 3606 243, 245, 261, 620621,622, 625

BS 3604 660 J/(kgK) 46,1 45,2 44,5 43,6 41,4 38,5 36,9

Electrical Resistivity at Temperature British Standards Steel Grade °C 20 100 200 300 400 500 600

Carbon Steel

BS 3059 Pt1 320 _m 0,205 0,235 0,306 0,394 0,497BS 3059 Pt2 360, 440 _m 0,205 0,235 0,306 0,394 0,497 0,611 0,761

Alloy Steel

243 _m 0,208 0,254 0,321 0,403 0,502 0,608 0,744620 _m 0,245 0,283 0,348 0,426 0,519 0,620 0,773

BS 3059 Pt2 622-490 _m 0,324 0,338 0,407 0,489 0,586 0,689 0,803629-470, 629-590 _m 0,517 0,575 0,652 0,734 0,817 0,898 0,980762 _m 0,593 0,651 0,729 0,804 0,877 0,949 1,021


Japanese Industrial Standards (JIS)

JIS G3463 Stainless Steel Boiler and Heatexchanger Tubes

2) Mechanical Properties (JIS G3459)

4) Dimensional Tolerances (JIS G3459)

3) Mechanical Properties (JIS G3463)

Remarks: 1. Even when the purchaser requests the product analysis, the chemical composition gi-ven above shall be applied, except that carbon-content for SUS 304 LTB and SUS316 LTB shall be 0,035% or less.

2. For SUS 329 JITB alloxing elements other than those given in Table 3 may be add-med, if necessary.

Note (2) The tubes of SUS 410 TB and SUS 430 TB may contain 0,60% or less of nickel.

Symbol Reference Chemical Composition in %

of class Former C max Si max Mn max P max S max Ni Cr Mo Others symbol

SUS 420 SUS 51 0,15 1,00 1,00 0,040 0,030 (2) 11,50-13,50SUS 430 SUS 24 0,12 0,75 1,00 0,040 0,030 (2) 16,00-18,00SUS 304 SUS 27 0,08 1,00 2,00 0,040 0,030 8,00-11,00 18,00-20,00SUS 304H SUS 27H 0,04-0,10 0,75 2,00 0,040 0,030 8,00-11,00 18,00-20,00SUS 304L SUS 28 0,03 1,00 2,00 0,040 0,030 9,00-13,00 18,00-20,00SUS 321 SUS 29 0,08 1,00 2,00 0,040 0,030 9,00-13,00 17,00-19,00 Ti5XC%minSUS 321H SUS 29H 0,04-0,10 0,75 2,00 0,030 0,030 9,00-13,00 17,00-20,00 Ti4XC%-0,60SUS 316 SUS 32 0,08 1,00 2,00 0,040 0,030 10,00-14,00 16,00-18,00 2,00-3,00SUS 316H SUS 32H 0,04-0,10 0,75 2,00 0,030 0,030 11,00-14,00 16,00-18,00 2,00-3,00SUS 316L SUS 33 0,03 1,00 2,00 0,040 0,030 12,00-16,00 16,00-18,00 2,00-3,00SUS 309S SUS 41 0,15 1,00 2,00 0,040 0,030 12,00-15,00 22,00-24,00SUS 310S SUS 42 0,15 1,50 2,00 0,040 0,030 19,00-22,00 24,00-26,00SUS 347 SUS 43 0,08 1,00 2,00 0,040 0,030 9,00-13,00 17,00-19,00 Nb+Ta10XC%minSUS 347H SUS 43H 0,04-0,10 1,00 2,00 0,030 0,030 9,00-13,00 17,00-20,00 Nb+Ta8XC%-1,00

Tension TestElongation in %

Symbol Reference Tensile Proof No.11of class Former strength Stress test piece No.5 No.5

symbol kgf/mm kgf/mm No.12 test piece test piece(N/mm) (N/mm) test piece

Longitdl Transvse Longitdldirection direction direction

SUS 304TP SUS 27TP 53 min 21 min 35 min 25 min 30 min(520 min) (206 min)

SUS 304HTP SUS 27HTP 53 min 21 min 35 min 25 min 30 min(520 min) (206 min)

SUS 304LTP SUS 28TP 49 min 18 min 35 min 25 min 30 min(481 min) (177 min)





SUS 316LTP SUS 33TP 49 min 18 min 35 min 25 min 30 min(481 min) (177 min)

SUS 309STP SUS 41TP 53 min 21 min 35 min 25 min 30 min(520 min) (206 min)

SUS 310STP SUS 42TP 53 min 21 min 35 min 25 min 30 min(520 min) (206 min)



SUS 329JlTP 60 min 40 min 18 min 13 min(588 min) (395 min)

Tolerance onDivision Tolerance on O.D. Tolerance on W.T. deviation in W.T.

Hot-finished Less than 50 mm: ± 0,5 mm Less than 4 mm: ± 0,5 mm 20% or less Seamless of W.T.Steel Pipe 50 mm or more: ± 1 % 4 mm or more: ± 12,5 %ColdfinishedSeaml. SteelPipe, autom. Less than 30 mm: ± 0,3 mm Less than 2 mm: ± 0,2 mm Arc WeldedSteel Pipe, 30 mm or more: ± 1 % 2 mm or more: ± 10 %Electric-ResistanceWelded Steel Pipe

5) Tolerance on length (JIS G3463) Unit mmDivision Tolerance on length

O.D. 7 mm or less +70

50 mm

or less More than 7 m

O.D. 7 m or less 1100

More than50 mm More than 7 m

Tension TestElongation in %

Symbol Tensile Proof No.11 of class strength Stress test piece No.5

kgf/mm kgf/mm No.12 test piece(N/mm) (N/mm) test piece

Longitdl Transvsedirection direction

SUS 410TB 42 min 21 min 20 min 15 min(412 min) (206 min)



SUS 304HTB 53 min 21 min 35 min 25 min(520 min) (206 min)

SUS 304LTB 49 min 18 min 35 min 25 min(481 min) (177 min)





SUS 316LTB 49 min 18 min 35 min 25 min(481 min) (177 min)

SUS 309STB 53 min 21 min 35 min 25 min(520 min) (206 min)

SUS 310STB 53 min 21 min 35 min 25 min(520 min) (206 min)



SUS 329JITB 60 min 40 min 18 min 13 min(588 min) (395 min)

Plus tolerance shall be determinedby adding 3 mm to 7 mm for each3 m´s increase or fraction there ofin length. Maximum shall be 15 mm.

Plus tolerance shall be determinedby adding 3 mm to 7 mm for each3 m´s increase or fraction there ofin length. Maximum shall be 15 mm.


Japanese Industrial Standards (JIS)

Stainless Steel Pipes (G 3459-1978)

Stainless Steel Tubes for Structure Purposes (G 3446-1977)

Stainless Steel Sanitary Tubing (G 3447-1977)

Grade No. Chemical Composition, %

C,max. Si,max. Mn,max. P,max. S,max. Ni Cr Mo

SUS 304 TBS 0,08 1,00 2,00 0,040 0,030 8,0-11,0 18,0-20,0

SUS 304L TBS 0,03 1,00 2,00 0,040 0,030 9,0-13,0 18,0-20,0

SUS 316 TBS 0,08 1,00 2,00 0,040 0,030 10,0-14,0 16,0-18,0 2,0-3,0

SUS 316L TBS 0,03 1,00 2,00 0,040 0,030 12,0-16,0 16,0-18,0 2,0-3,0

1 When product analysis is requested by the purchaser, the chemical compositions specified above will apply. The carbon content of SUS 304 LTP and SUS 316 LTP shall be 0,035 max.

2 For SUS 329 J1TP, alloying elements other than specified may be added as required.

1 Up to 0,60% Ni may be contained in SUS 410 TK and SUS 430 TK.Note When product analysis is requested by the purchaser, the chemical compositions specified above will apply.

1 When product analysis is requested by the purchaser, the chemical compositions specified above will apply. In this case, the carbon content of SUS 304LTBS and SUS 316LTDS shall be 0,035% max.

Grade No. Former No.Chemical Composition, % Other

C Si,max. Mn,max. P,max. S,max. Ni Cr MoElements

SUS 304 TP SUS 27 TP 0,08 1,00 2,00 0,040 0,030 8,00-11,0 18,0-20,0

SUS 304 HTP SUS 27 HTP 0,04-0,10 0,75 2,00 0,040 0,030 8,00-11,0 18,0-20,0

SUS 304 LTP SUS 28 TP 0,030 1,00 2,00 0,040 0,030 9,00-13,0 18,0-20,0

SUS 309 STP SUS 41 TP 0,15 1,00 2,00 0,040 0,030 12,0-15,0 22,0-24,0

SUS 310 STP SUS 42 TP 0,15 1,50 2,00 0,040 0,030 19,0-22,0 24,0-26,0

SUS 316 TP SUS 32 TP 0,08 1,00 2,00 0,040 0,030 10,0-14,0 16,0-18,0 2,0-3,0

SUS 316 HTP SUS 32 HTP 0,40-0,10 0,75 2,00 0,030 0,030 11,0-14,0 16,0-18,0 2,0-3,0

SUS 316 LTP SUS 33 TP 0,030 1,00 2,00 0,040 0,030 12,0-16,0 16,0-18,0 2,0-3,0

SUS 321 TP SUS 29 TP 0,08 1,00 2,00 0,040 0,030 9,0-13,0 17,0-19,0 Ti 5xC%

SUS 321 HTP SUS 29 HTP 0,04-0,10 0,75 2,00 0,030 0,030 9,0-13,0 17,0-20,0 Ti 4xC%

-0,60

SUS 347 TP SUS 43 TP 0,08 1,00 2,00 0,040 0,030 9,0-13,0 17,0-19,0 Nb + Ta

10xC%

SUS 347 HTP SUS 43 HTP 0,04-0,10 1,00 2,00 0,030 0,030 9,0-13,0 17,0-20,0 Nb + Ta

8xC%-1,00

SUS 329 J1TP 0,08 1,00 1,50 0,040 0,030 3,0-6,0 23,0-28,0 1,0-3,0

Grade No. Former No.Chemical Composition, % Other

C, max Si,max. Mn,max. P,max. S,max. Ni Cr MoElements

SUS 410 TK STKS 5 0,15 1,00 1,00 0,040 0,030 1) 11,5-13,5

SUS 430 TK STKS 5 0,12 0,75 1,00 0,040 0,030 1) 16,0-18,0

SUS 304 TK STKS 7 0,08 1,00 2,00 0,040 0,030 8,0-11,0 18,0-20,0

SUS 316 TK STKS 8 0,08 1,00 2,00 0,040 0,030 10,0-14,0 16,0-18,0 2,0-3,0

SUS 321 TK STKS 9 0,08 1,00 2,00 0,040 0,030 9,0-13,0 17,0-19,0 Ti 5xC%

SUS 347 TK STKS 10 0,08 1,00 2,00 0,040 0,030 9,0-13,0 17,0-19,0 Nb + Ta 10xC%


Japanese Industrial Standards - Steel Tubes and PipesSteel Tubes for Fired Heater (G 3467-1978)

Alloy Steel Pipes (G 3458-1978)

Alloy Steel Tubes for Structure Purposes (G3441-1977)

Steel Heatexchanger Tubes for Low Temperature Service (G 3464-1978)

Note: When product analysis is requested by the purchaser, the permissible variations from the above chemical composition shall comply with table 2 of JIS G 0321 (Product analysis and its toleran-ce for wrought Steel) in the case of Carbon Steel Tubes. For Alloy and Stainless Steel Tubes, the chemical compositions specified above will apply. Those for Ni-Cr Steel Tubes shall be agreedupon between the purchaser and the producer.

Grade No. Chemical Composition in %

C max Si max Mn max P max S max Ni Cr Mo Other Elements

STF 38 0,25 0,10-0,35 0,30-0,90 0,035 0,035STF 42 0,30 0,10-0,35 0,30-1,00 0,035 0,035STFA 12 0,10-0,20 0,10-0,50 0,30-0,80 0,035 0,035 0,45-0,65STFA 22 0,15 0,50 0,30-0,60 0,035 0,035 0,80-1,25 0,45-0,65STFA 23 0,15 0,50-1,00 0,30-0,60 0,030 0,030 1,00-1,50 0,45-0,65STFA 24 0,15 0,50 0,30-0,60 0,030 0,030 1,90-2,60 0,87-1,13STFA 25 0,15 0,50 0,30-0,60 0,030 0,030 4,00-6,00 0,45-0,65STFA 26 0,15 0,25-1,00 0,30-0,60 0,030 0,030 8,00-10,00 0,90-1,10SUS 304 TF 0,08 1,00 2,00 0,040 0,030 8,00-11,00 18,00-20,00SUS 304 HTF 0,04-0,10 0,75 2,00 0,040 0,030 8,00-11,00 18,00-20,00SUS 309 STF 0,15 1,00 2,00 0,040 0,030 12,00-15,00 22,00-24,00SUS 310 STF 0,15 1,50 2,00 0,040 0,030 19,00-22,00 24,00-26,00SUS 316 TF 0,08 1,00 2,00 0,040 0,030 10,00-14,00 16,00-18,00 2,00-3,00SUS 316 HTF 0,04-0,10 0,75 2,00 0,030 0,030 11,00-14,00 16,00-18,00 2,00-3,00SUS 321 TF 0,08 1,00 2,00 0,040 0,030 9,00-13,00 17,00-19,00 Ti 5 x C% minSUS 321 HTF 0,04-0,10 0,75 2,00 0,030 0,030 9,00-13,00 17,00-20,00 Ti 4 x C% - 0,60SUS 347 TF 0,08 1,00 2,00 0,040 0,030 9,00-13,00 17,00-19,00 Nb + Ta 10 x C% minSUS 347 HTF 0,04-0,1 0,75 2,00 0,030 0,030 9,00-13,00 17,00-20,00 Nb + Ta 8 x C% - 1.00NCF 2 TF 0,10 1,00 4,50 0,030 0,015 30,00-35,00 19,00-23,00 Cu 0,75 max,

Al 0,15 - 0,60Ti 0,15 - 0,60

NCF 2 HTF 0,05-0,10 1,00 1,50 0,030 0,015 30,00-35,00 19,00-23,00 Cu 0,75 max, Al 0,15 - 0,60Ti 0,15 - 0,60


C Si max Mn P max S max Cr Mo

STPA 12 0,10-0,20 0,10-0,50 0,30-0,80 0,035 0,035 0,45-0,65STPA 20 0,10-0,20 0,10-0,50 0,30-0,60 0,035 0,035 0,50-0,80 0,45-0,65STPA 22 0,15 0,50 0,30-0,60 0,035 0,035 0,80-1,25 0,45-0,65STPA 23 0,15 0,50-1,00 0,30-0,60 0,030 0,030 1,00-1,50 0,45-0,65STPA 24 0,15 0,50 0,30-0,60 0,030 0,030 1,90-2,60 0,87-1,13STPA 25 0,15 0,50 0,30-0,60 0,030 0,030 4,00-6,00 0,45-0,65STPA 26 0,15 0,25-1,00 0,30-0,60 0,030 0,030 8,00-10,00 0,90-1,10

Note: When product analysis is requested by the purchaser, the chemical compositions specified above will apply.


C Si max Mn P max S max Ni Cr Mo

STKS 1 0,26-0,33 0,15-0,35 0,40-0,85 0,030 0,030 0,80-1,20 0,15-0,25STKS 2 0,26-0,33 0,15-0,35 0,60-0,90 0,030 0,030 0,40-0,70 0,40-0,65 0,15-0,25STKS 3 0,32-0,39 0,15-0,35 0,40-0,85 0,030 0,030 0,80-1,20 0,15-0,25STKS 4 0,32-0,39 0,15-0,35 0,470-1,00 0,030 0,030 0,40-0,70 0,40-0,65 0,20-0,30

Note: When product analysis is requested by the purchaser, the chemical compositions specified above will apply.


C MSi max Mn P max S max Ni

STBL 39 0,25 0,35 1,35 0,035 0,035STBL 46 0,18 0,10-0,35 0,30-0,60 0,030 0,030 3,20-3,80STBL 70 0,13 0,10-0,35 0,90 0,030 0,030 8,50-9,50

Note: When product analysis is requested by the purchaser, the permissible variations from the above chemical composition shall comply with table 2 of JIS G 0321 (Product analysis and its tole-rance for wrought Steel) in the case of Seamless Steel Tubes of STBL 39 or table 1 of JIS G0321 in the case of electric-resistance Welded Steel Tubes. And Tubes of STBL 46 and STBL 70shall comply with table 3 of JIS G 0321.


Japanese Industrial Standards - Steel Tubes and Pipes

Chemical Composition in % Tension Test (min)

Tensile Yield ElongationJIS Class Notation C max Si max Mn max P max S max Cr Mo Strength Point No.11 & 12

kg/mm kg/mm Test Piece

G3454 2 STPG38 0,25 0,35 0,30-0,90 0,040 0,040 38 22 303 STPG42 0,30 0,35 0,30-1,00 0,040 0,040 42 25 25

G3455 2 STS38 0,25 0,10-0,35 0,30-1,10 0,035 0,035 38 22 303 STS42 0,30 0,10-0,35 0,30-1,40 0,035 0,035 42 25 254 STS49 0,33 0,10-0,35 0,30-1,50 0,035 0,035 49 28 25

G3456 2 STPT38 0,25 0,10-0,35 0,30-0,90 0,035 0,035 38 22 303 STPT42 0,30 0,10-0,35 0,30-1,00 0,035 0,035 42 25 254 STPT49 0,33 0,10-0,35 0,30-1,00 0,035 0,035 49 28 25

G3445 11A STKM11A 0,12 0,35 0,25-0,60 0,040 0,040 30 35

12A STKM12A 35 18 3512B STKM12B 0,20 0,35 0,25-0,60 0,040 0,040 40 28 2512C STKM12C 48 36 20



15A STKM15A 0,25-0,35 0,35 0,30-1,00 0,040 0,040 48 28 2215C STKM15C 0,5-0,35 0,35 0,30-1,00 0,040 0,040 59 44 12

16A STKM16A 0,35-0,45 0,40 0,40-1,00 0,040 0,040 52 33 2016C STKM16C 0,35-0,45 0,40 0,40-1,00 0,040 0,040 63 47 12

17A STKM17A 0,45-0,55 0,40 0,40-1,00 0,040 0,040 56 35 2017C STKM17C 66 49 10

18A STKM18A 45 28 2518B STKM18B 0,18 0,55 1,50 0,040 0,040 50 32 2318C STKM18C 52 39 15

G3461 2 STB33 0,06-0,18 0,35 0,25-0,60 0,035 0,035 33 18 353 STB35 0,08-0,18 0,35 0,30-0,60 0,035 0,035 35 18 354 STB42 0,32 0,35 0,30-0,80 0,035 0,035 42 26 255 STB52 0,25 0,35 1,00-1,50 0,035 0,035 52 30 25

G3462 12 STBA12 0,10-0,20 0,10-0,50 0,30-0,80 0,035 0,035 0,45-0,6513 STBA13 0,15-0,25 0,10-0,50 0,30-0,80 0,035 0,035 0,45-0,6520 STBA20 0,10-0,20 0,10-0,50 0,30-0,60 0,035 0,035 0,50-0,80 0,40-0,6522 STBA22 0,15 0,50 0,30-0,60 0,035 0,035 0,80-1,25 0,45-0,6523 STBA23 0,15 0,50-1,00 0,30-0,60 0,030 0,030 1,00-1,50 0,45-0,6524 STBA24 0,15 0,50 0,30-0,60 0,030 0,030 1,90-2,60 0,87-1,1325 STBA25 0,15 0,50 0,30-0,60 0,030 0,030 4,00-6,00 0,43-0,6526 STBA26 0,15 0,25-1,00 0,30-0,60 0,030 0,030 8,00-10,00 0,90-1,10

(JIS G4105) Chemical Composition %

C Si Mn Pmax Smax Cr Mo

SCM 432 (SCM1) 0,27-0,37 0,15-0,35 0,30-0,60 0,030 0,030 1,00-1,50 0,15-0,30SCM 430 (SCM2) 0,28-0,33 0,15-0,35 0,60-0,85 0,030 0,030 0,90-1,20 0,15-0,30SCM 435 (SCM3) 0,33-0,38 0,15-0,35 0,60-0,85 0,030 0,030 0,90-1,20 0,15-0,30SCM 440 (SCM4) 0,38-0,43 0,15-0,35 0,60-0,85 0,030 0,030 0,90-1,20 0,15-0,30SCM 445 (SCM5) 0,43-0,48 0,15-0,35 0,60-0,85 0,030 0,030 0,90-1,20 0,15-0,30SCM 415 (SCM21) 0,13-0,18 0,15-0,35 0,60-0,85 0,030 0,030 0,90-1,20 0,15-0,30SCM 420 (SCM22) 0,18-0,23 0,15-0,35 0,60-0,85 0,030 0,030 0,90-1,20 0,15-0,30SCM 421 (SCM23) 0,17-0,23 0,15-0,35 0,70-1,00 0,030 0,030 0,90-1,20 0,15-0,30SCM 822 (SCM24) 0,20-0,25 0,15-0,35 0,60-0,85 0,030 0,030 0,90-1,20 0,35-0,45SCM 418 ( - ) 0,16-0,21 0,15-0,35 0,60-0,85 0,030 0,030 0,90-1,20 0,15-0,30

Aluminium Brass Alloy 687


STANDARD BS 2871/PART 3 ASTM B 111 DIN 17660/1785 NFA 51102 JIS H3300

GRADE CZ 110 C 68700 CuZn20Al2 CuZn20Al2 C 6870

Cu 76,0 - 78,0 76,0 - 79,0 76,0 - 79,0 76,0 - 79,0 76,0 - 79,0

Al 1,8 - 2,3 1,8 - 2,5 1,8 - 2,3 1,8 - 2,5 1,8 - 2,5

Pb 0,07 max. 0,07 max 0,07 max. 0,07 max. 0,07 max.

Ni 0,1 max.

Fe 0,06 max. 0,06 max. 0,07 max. 0,06 max. 0,06 max.

Zn Rem. Rem. Rem. Rem. Rem.

As 0,02 - 0,06 0,02 - 0,10 0,02 - 0,035 0,02 - 0,06 0,02 - 0,06

P 0,01 max.

Mg 0,005 max.

Mn 0,1 max.

Total Impurities 0,3 max. Others Total 0,03 max.

0,1 max.

CONDITION M 061 F39 Annealed (X690) O

TA F34 — —

O — —

Yield Strength — 125 min. 150 - 230 — —

N/mm2 — — 120 - 180 — —

— — — —

Tensile Strength — 345 min. 390 min. — 373 min.

N/mm2 — — 340 min. — —

— — — — —

Elongation (%) — — 45 min. — 40 min.

— — 55 min. — —

— — — —

Hardness Hv5 150 min. — — 80 - 130 —

85 - 110 — — — —

75 max. — — — —

Grain Size (mm) 0,050 max. 0,010 - 0,045 0,010 - 0,050 0,010 - 0,045 0,010 - 0,045

(Condition TA)

Typical use: Most used copper alloy for heat exchanger tubes application.

Represents the best option for any heat exchanger which is involved with

saline water. The addition of arsenic has solved the problem of dezincification.

Melting Point: 935° C • Hot Working Properties: OK

Density (20° C): 8,33 g/cm3 • Cold Working Properties: Very Good

Weight Average wall: (OD-WT) x WT x 0,0265 = Kg/m (all sizes in mm)

formula: Minimum wall: (OD-WT) x WT x 0,0275 = Kg/m (all sizes in mm)


Admiralty Brass Alloy 443


GRADE CZ 111 C 44300 CuZn28Sn1 CuZn29Sn1 C 4430

Cu 70,0 - 73,0 70,0 - 73,0 70,0 - 72,5 70,0 - 73,0 70,0 - 73,0

Sn 1,0 - 1,5 0,9 - 1,2 0,9 - 1,3 0,9 - 1,2 0,9 - 1,2

Pb 0,07 max. 0,07 max 0,07 max. 0,07 max. 0,07 max.

Ni 0,1 max.

Fe 0,06 max. 0,06 max. 0,07 max. 0,06 max. 0,06 max.

Zn Rem. Rem. Rem. Rem. Rem.

As 0,02 - 0,06 0,02 - 0,06 0,02 - 0,035 0,02 - 0,06 0,02 - 0,06

P 0,01 max.

Mn 0,1 max.


0,1 max.


TA F32 — —

O — —


N/mm2 — — 100 - 170 — —

— — — —


N/mm2 — — 320 min. — —

— — — — —


— — 55 min. — —

— — — —

Hardness Hv5 150 min. — — 80 - 120 —

85 - 105 — — — —

75 max. — — — —

Grain Size (mm) 0,050 max. 0,010 - 0,045 0,010 - 0,050 0,010 - 0,045 0,010 - 0,045

(Condition TA)

Typical use: The specific copper alloy for application fresh water. Often used for heat exchangers which are involved with

operations in petroleum refineries and petrochemical plants.

Melting Point: 935 ° C • Hot Working Properties: OK

Density (20° C): 8,53 g/cm3 • Cold Working Properties: Very Good



Copper Nickel 90/10Alloy 706



GRADE CN 102 C 70600 CuNi10Fe1Mn CuNi10Fe1Mn C 7060

Cu Rem. Rem. Rem. Rem. Rem.

Pb 0,01 max. 0,05 max. 0,03 max. 0,05 Sn+Pb max. 0,05 max.

Ni 10,0 - 11,0 9,0 - 11,0 9,0 - 11,0 9,0 - 11,0 9,0 - 11,0

Fe 1,0 - 2,0 1,0 - 1,8 1,0 - 1,8 1,0 - 2,0 1,0 - 1,8

Mn 0,5 - 1,0 1,0 max. 0,5 - 1,0 0,3 - 1,0 0,2 - 1,0

Zn 1,0 max. 0,5 max. 0,5 max. 0,5 max.

S 0,05 max. 0,05 max. 0,02 max.

C 0,05 max. 0,05 max. 0,05 max.

Cu+Ni+Fe+Mn 99,5 min.

Total Impurities 0,3 max. Others Total

0,1 max.


O H55 — —


N/mm2 — 240 min. — — —


N/mm2 — 310 min. — —


— — — — —

Hardness Hv5 150 min. — — 70 - 100 —

80 - 110 — — — —

Grain Size (mm) 0,050 max. 0,010 - 0,045 0,010 - 0,050 0,010 - 0,045 0,010 - 0,045

(Condition O)

Typical use: Used for the working in sea water, mainly for shipbuilding and sea water pipelines, stations, desalination,

because of its very good corrosion resistance.

Melting Point: 1150° C • Hot Working Properties: Good

Density (20° C): 8,94 g/cm3 • Cold Working Properties: Good




Copper Nickel 70/30Alloy 715


GRADE CN 107 C 71500 CuNi30Mn1Fe CuNi30Mn1Fe C 7150


Pb 0,01 max. 0,05 max. 0,03 max. 0,05 Sn+Pb max. 0,05 max.

Ni 30,0 - 32,0 29,0 - 33,0 30,0 - 32,0 29,0 - 32,0 29,0 - 33,0

Fe 0,4 - 1,0 0,4 - 1,0 0,4 - 1,0 0,4 - 0,7 0,4 - 0,7

Mn 0,5 - 1,5 1,0 max. 0,5 - 1,5 0,5 - 1,5 0,2 - 1,0

Zn 1,0 max. 0,5 max. 0,5 max. 0,5 max.

S 0,08 max. 0,06 max. 0,02 max.

C 0,06 max. 0,06 max. 0,06 max.

Cu+Ni+Fe+Mn 99,5 min.


0,1 max.


O HR50 — — —


N/mm2 — 345 min. — — —


N/mm2 — 495 min. — — —


— 12 min. (WT 1,21 mm) — — —

15 min. (WT>1,21 mm)

Hardness Hv5 150 min. — — 90 - 130 —

90 - 120 — — — —

Grain Size (mm) 0,050 max. 0,010 - 0,045 0,010 - 0,050 0,010 - 0,045 0,010 - 0,045

(Condition O)

Typical use: This alloy has all the characteristics of CuNi 90/10, but also offers excellent corrosion

resistance in high velocity sea water. Also the operating temperature is much higher than

of CuNi 90/10. Can assure a long service life and reliability.

Melting Point: 1240° C • Hot Working Properties: Good

Density (20° C): 8,94 g/cm3 • Cold Working Properties: Good



Copper Nickel Iron Manganese 66/30/2/2Alloy 71640



GRADE CN 108 C 71640 CuNi30Fe2Mn2 CuNi30Fe2Mn2 C 7164


Pb 0,05 max. 0,02 max. 0,05 Sn+Pb max. 0,05 max.

Ni 29,0 - 32,0 29,0 - 32,0 29,0 - 32,0 29,0 - 32,0 29,0 - 32,0

Fe 1,7 - 2,3 1,7 - 2,3 1,5 - 2,5 1,5 - 2,0 1,7 - 2,3

Mn 1,5 - 2,5 1,5 - 2,5 1,5 - 2,5 1,5 - 2,0 1,5 - 2,5

Zn 1,0 max. 0,5 max. 0,5 max. 0,5 max.

S 0,06 max. 0,02 max.

C 0,05 max. 0,06 max.

Cu+Ni+Fe+Mn min. 99,5

Total Impurities 0,3 max. 0,3 max. 0,1 max.


O HR50 — —


N/mm2 — 400 min. — — —


N/mm2 — 560 min. — — —


— — — — —

Hardness Hv5 150 min. — — 90 - 130 —

90 - 120 — — — —

Grain Size (mm) 0,050 max. 0,010 - 0,045 0,010 - 0,050 0,010 - 0,045 0,010 - 0,045

(Condition O)

Typical use: Has the most resistance against impingement attack and corrosion by suspended solids of all copper based

alloys which are used for heat exchanger tube applications. This alloy is preferred for desalination plants.

Melting Point: 1240°C • Hot Working Properties: Good

Density (20°C): 8,94 g/cm3 • Cold Working Properties: Good



GGeerrmmaann


Steel Heat Exchanger Tubes Chemical Analysis

A-179Seamless Colddrawn 0,06-0,18 0,27-0,63 0,035 0,035Carbon Steel Tubes

A-214Welded Carbon 0,18max. 0,27-0,63 0,035 0,035Steel Tubes

ST 35.8/ DIN 17175Seamless Colddrawn 0,17max. 0,40-0,80 0,040 0,040 0,10-0,35 Carbon Steel Tubes

A-213 T11 0,05-0,15 0,30-0,60 0,025 0,025 0,50-1,00 1,00-1,50 0,44-0,65Seamless Colddrawn T22 0,05-0,15 0,30-0,60 0,025 0,025 0,50max. 1,90-2,60 0,87-1,13Alloy Steel Tubes T5 0,15max. 0,30-0,60 0,025 0,025 0,50max. 4,00-6,00 0,45-0,65

T9 0,15max. 0,30-0,60 0,025 0,025 0,25-1,00 8,00-10,0 0,90-1,10

15Mo3 / DIN 17175 0,12-0,20 0,40-0,80 0,035 0,035 0,10-0,35 0,25-0,3513CrMo44 / DIN 17175 0,10-0,18 0,40-0,70 0,035 0,035 0,10-0,35 0,70-1,10 0,45-0,6510CrMo910 / DIN 17175 0,08-0,15 0,40-0,70 0,035 0,035 0,50max. 2,00-2,50 0,90-1,2012CrMo195 / DIN 17176 0,08-0,15 0,30-0,60 0,025 0,020 0,50max. 4,00-6,00 0,45-0,65

A-213 TP304 0,08max. 2,00 0,040 0,030 0,75max. 18,0-20,0 Ni8,00-10,5Seamless Stainless TP304L 0,035max. 2,00 0,040 0,030 0,75max. 18,0-20,0 Ni8,00-13,0Steel Tubes TP316 0,08max. 2,00 0,040 0,030 0,75max. 16,0-18,0 2,00-3,00 Ni11,0-14,0

TP316L 0,035max. 2,00 0,040 0,030 0,75max. 16,0-18,0 2,00-3,00 Ni10,0-15,0TP321 0,08max. 2,00 0,040 0,030 0,75max. 17,0-20,0 Ni9,00-13,0

Ti5x%C;max.0,6

DIN 17458 1.4301 0,07max. 2,00 0,045 0,030 1,00max. 17,0-19,0 Ni8,50-11,0Seamless Stainless 1.4306 0,03max. 2,00 0,045 0,030 1,00max. 18,0-20,0 Ni10,0-12,5Steel Tubes 1.4401 0,07max. 2,00 0,045 0,030 1,00max. 16,5-18,5 2,00-2,50 Ni10,5-13,5

1.4404 0,03max. 2,00 0,045 0,030 1,00max. 16,5-18,5 2,00-2,50 Ni11,0-14,01.4435 0,03max. 2,00 0,045 0,025 1,00max. 17,0-18,5 2,50-3,00 Ni12,5-15,01.4436 0,07max. 2,00 0,045 0,025 1,00max. 16,5-18,5 2,50-3,00 Ni11,0-14,01.4541 0,08max. 2,00 0,045 0,030 1,00max. 17,0-19,0 Ni9,00-12,0

Ti5x%C;max.0,81.4571 0,08max. 2,00 0,045 0,030 1,00max. 16,5-18,5 2,00-2,50 Ni 10,5-13,5

Ti5x%C;max.0,8

A-249 TP304 0,08max. 2,00 0,040 0,030 0,75max. 18,0-20,0 Ni8,00-11,0Welded Stainless TP304L 0,035max. 2,00 0,040 0,030 0,75max. 18,0-20,0 Ni8,00-13,0Steel Tubes TP316 0,080max. 2,00 0,040 0,030 0,75max. 16,0-18,0 2,00-3,00 Ni10,0-14,0

TP316L 0,035max. 2,00 0,040 0,030 0,75max. 16,0-18,0 2,00-3,00 Ni10,0-15,0TP321 0,080max. 2,00 0,040 0,030 0,75max. 17,0-20,0 Ni9,00-13,0

Ti5x%C;max.0,7

ASTM-B1631 N04400 0,30max. 2,00 0,024. 0,50max. Ni63,0min.ASTM-B1632 N06600 0,15max. 1,00 0,015 0,50max. 14,0-17,0 Ni72,0min.ASTM-B1633 N08800 0,10max. 1,50 0,015 1,00max. 19,0-23,0 Ni30,0-35,0

Ti0,15-0,60ASTM-B1634 N08825 0,050max. 1,00 0,030 0,50max. 19,5-23,5 2,50-3,50 Ni38,0-46,0

Ti0,60-1,20

Specification Grade Chemical Composition in %

C Mn Pmax. Smax. Si Cr Mo Others

1Cu 28,0-34,0; Fe 2,50 max. 1Cu 0,50 max.; Fe 6,0-10,0 3Cu 0,75 max.; Al 0,15 - 0,60; Fe 39,5 min. 4Cu1,5-3,0; Al0,2max.; Fe22,0min.

TPS Stock Range - Alloy Range Base TubesStandard Grades - Comparison Table


Material ASTM/ASME DIN Ger. Mat.-No. BS Grade Material

Carbon Steel A179 ST 35.8/1 1.0305 3059/1 CFS 360Carbon Steel A192 ST 35.8/1 1.0305 3059/2 CFS/HFS360Carbon Steel A210 Gr.A1 ST 45.8/1 1.0405 3602/1 CFS/HFS410Carbon Steel A210 Gr.C 17Mn4 1.0481 3602/1 CFS/HFS460

A214 ST 37.8/DIN 17177 1.0315 3059/2 ERW 360CAT

Low Alloy Steel A209 T1 16Mo5 1.5423 3606 245Low Alloy Steel A213/A199 T11/T12 13CrMo44 1.7335 3604 621Low Alloy Steel A213/A199 T22 10CrMo910 1.7380 3059 622-440Low Alloy Steel A213/199 T5 12CrMo195 1.7362 3604 625Low Alloy Steel A213/A199 T9 X12CrMo91 1.7386 3059/3604 629-470Low Alloy Steel A335 P1/A161 T1 16Mo5 1.5423 3603 245Low Alloy Steel A335 P11/P12/A200 T11/T12 13CrMo44 1.7335 3604 620-460Low Alloy Steel A335 P22/A200 T22 10CrMo910 1.7380 3604 622Low Alloy Steel A335 P5/A200 T5 12CrMo195 1.7362 3606 625Low Alloy Steel A335 P9/A200 T9 X12CrMo91 1.7386 3059/2 629-590

Stainless Steel A213/A312 TP304 X5CrNi189 1.4301 970 304 S15Stainless Steel A213/A312 TP304L X2CrNi189 1.4306 970 304 S12Stainless Steel A213/A312 TP321 X10CrNiTi189 1.4541 970 321 S12Stainless Steel A213/A312 TP316 X5CrNiMo810 1.4401 970 315 S16Stainless Steel A213/A312 TP316L X2CrNiMo1810 1.4404 970 316 S12Stainless Steel A213/A312 TP347 X10CrNiNb189 1.4550 970 347 S17Stainless Steel A213/A312 TP316Ti X10CrNiMiTi1810 1.4571 970 320 S17Stainless Steel A289/A970 UNS S31803 X2CrNiMo11225 1.4462 —— ——Stainless Steel B677 Alloy904L X2NiCrMoCu25205 1.4539 —— ——

Nickel B161 Ni200 Ni99,2 2.4066 3074 NA11Nickel B161 Ni201 Ni99,2 2.4068 3074 NA12

Nickel-Copper B163 UNS N04400 NiCu30Fe 2.4360 3074 NA13

Nickel-Chrom-Iron B163 UNS N06600 NiCr15Fe 2.4816 3074 NA14Nickel-Chrom-Iron B161 UNS N08825 NiCr21Mo 2.4858 3074 NA16Nickel-Chrom-Iron B468 UNS N08020 —— —— —— ——Nickel-Chrom-Iron B163 UNS N08800 X10NiCrAlTi3220 1.4876 3074 NA15

Copper Alloy B75/B111 No.122 Sf-Cu 2.0090 2871 C106Copper Alloy B75/B111 No.142 CuAsp 2.1491 2871 C107Copper Alloy B111 Ca.No.443 CuZn28Sn 2.0470 2871 CZ111Copper Alloy B111 Ca.No.687 CuZn20Al 2.0460 2871 CZ110Copper Alloy B111 Ca.No.608 CuAl5AS 2.0918 —— ——Copper Alloy B111 Ca.No.706 CuNi10Fe 2.0872 2871 CN102Copper Alloy B111 Ca.No.715 CuNi30Fe 2.0882 2871 CN107

Aluminium Alloy Alloy1050/1050A Al99,5 3.0255 1050A(1B) ——Aluminium Alloy Alloy5754 AlMg3 3.3535 (N5) ——Aluminium Alloy Alloy3003 AlMnCu 3.0517 —— ——Aluminium Alloy Alloy5083 AlMg4,5Mn 3.3547 5083(N8) ——

Other material grades can be manufactured upon request. Please submit your enquiry.


Round BarsC

AR

BO

N &

ALL

OY

STEE

LR

OU

ND

BA

RIn

term

edia

te &

Hig

her T

empe

ratu

re G

rade

sLo

w. T

emp

Gra

des

Rou

nd B

arA-

182

A-18

2 (1

)A-

182

A-10

5A-

350

ASTM

Des

igna

tion

A-73

9 (4

)(2

) (4)

(3)

Rou

nd B

ar G

rade

F-1

F-12

F-11

F-22

F-5

N.A

.LF

-1LF

-2LF

-3B-

11B-

22(3

)(4)

(4)

Plat

e ASTM

Des

igna

tion

A-20

4A-

387

A-51

5A-

516

A-51

6A-

203

C-M

oC

R-M

oA-

516

A-53

7

Plat

e G

rade

GR

B&C

GR

-12

GR

-11

GR

-22

GR

-5Al

l Gra

des

All G

rade

sAl

l Gra

des

GR

D&E

Elem

ents

Max

% C

ompo

sitio

n U

nles

s O

ther

wis

e N

oted

Car

bon

.28

.10-

.20

.10-

.20

.05-

.15

.15

.35

.30

.30

.20

Man

gane

se.6

0-.9

0.3

0-.8

0.3

0-.8

0.3

0-.6

0.3

0-.6

0.6

0-1.

051.

351.

35.9

0

Phos

phor

us.0

45.0

40.0

40.0

40.0

30.0

40.0

35.0

35.0

35

Sulfu

r.0

45.0

40.0

40.0

40.0

30.0

50.0

40.0

40.0

40

Silic

on.1

5-.3

5.1

0-.6

0.5

0-1.

00.5

0..5

0.3

5.1

5-.3

0.1

5-.3

0.2

0-.3

5

Chr

omiu

m-

.80-

1.25

1.00

-1.5

02.

00-2

.50

4.0-

6.0

.30

.30

.30

.30

Mol

ybde

num

.44-

.65

.44-

.65.

.44-

.65

.87-

1.13

.44-

.65

.12

.12

.12

.12

Nic

kel

--

--

.50

.40

.40

.40

3.25

-3.7

5

Col

umbi

um-

--

--

.02

.02

.02

.02

Vana

dium

-

--

--

.03

.03

.03

.03

Cop

per

--

--

-.4

0.4

0.4

0.4

0

Mec

hani

cal (

Phys

ical

) Pro

pert

ies

Tens

ile k

si70

7070

7570

7060

-85

70-9

570

-95

Yiel

d ks

i40

4040

4540

3630

3637

.5

Elon

gatio

n %

min

.20

.020

.020

.020

.020

.030

2830

30

Red

uctio

n of

are

a %

min

.30

.030

.030

.030

.035

.030

3830

35

Brin

ell H

ardn

ess

143-

192

143-

207

143-

207

156-

207

143-

217

187

--

-

(1)

A-18

2 G

R. F

-11

& F-

22 d

ual c

ertif

ied

to A

739

GR

. B-1

1 &

B-22

(2)

A-18

2 G

R. F

-5 is

als

o pr

oduc

ed a

s T5

01 &

T50

2 st

ainl

ess

stee

l(3

)A-

350

LF-2

dua

l cer

tifie

d to

A-1

05, w

ith c

harp

y te

sts,

als

o ce

rtifie

d to

A69

6-C

and

A67

5-70

(4)

Preh

eat p

rior t

o w

eldi

ng a

nd p

ostw

eld

heat

trea

tmen

t is

reco

mm

ende

d.

All o

f the

abo

ve m

ater

ials

are

of w

elda

ble

qual

ity a

nd m

ay b

e ho

t or c

old

form

ed.

Steel Plates


A-5

14H

igh

Yiel

d St

reng

th, Q

uenc

hed

&Te

mpe

red

Allo

y St

eel P

late

sTA

BLE

1 C

HEM

ICA

LR

EQU

IREM

ENTS

(HEA

T A

NA

LYSI

S)G

rade

A, [

%]

Gra

de B

, [%

]G

rade

C, [

%]

Gra

de E

, [%

]G

rade

F, [

%]

Gra

de H

, [%

]G

rade

J, [

%]

Max

imum

Thi

ckne

ssin

(mm

)1-

1/4(

32)

1-1/

4(32

)1-

1/4(

32)

6 (1

50)

2-1/

2(65

)2(

50)

1-1/

4(32

)

Car

bon

0.15

-0.2

10.

12-0

.21

0.10

-0.2

00.

12-0

.20

0.10

-0.2

00.

12-0

.21

0.12

-0.2

1M

anga

nese

0.80

-1.1

00.

70-1

.00

1.10

-1.5

00.

40-0

.70

0.60

-1.0

00.

95-1

.30

0.45

-0.7

0Ph

ospo

rus

max

.0.

035

0.03

50.

035

0.03

50.

035

0.03

50.

035

Sulfu

r, m

ax.

0.04

0.04

0.04

0.04

0.04

0.04

0.04

Silic

on0.

40-0

.80

0.20

-0.3

50.

15-0

.30

0.20

-0.4

00.

15-0

.35

0.20

-0.3

50.

20-0

.35

Nic

kel

--

--

0.70

-1.0

00.

30-0

.70

-C

hrom

ium

0.50

-0.8

00.

40-0

.65

-1.

40-2

.00

0.40

-0.6

50.

40-0

.65

-M

olyb

denu

m0.

18-0

.28

0.15

-0.2

50.

15-0

.30

0.40

-0.6

00.

40-0

.60

0.20

-0.3

00.

50-0

.65

Vana

dium

-0.

03-0

.08

-A

0.03

-0.0

80.

03-0

.08

-Ti

tani

um-

0.01

-0.0

3-

0.01

-0.1

0-

--

Zirc

oniu

m0.

05-0

.15B

--

--

--

Cop

per

--

--

0.15

-0.5

0-

-Bo

ron

0.00

25 m

ax.

0.00

05-0

.005

0.00

1-0.

005

0.00

1-0.

005

0.00

05-0

.006

0.

0005

-0.0

050.

001-

0.00

5C

olum

bium

, max

.-

--

--

--

Gra

de M

, [%

]G

rade

P, [

%]

Gra

de Q

, [%

]G

rade

R, [

%]

Gra

de S

, [%

]G

rade

T, [

%]

Max

imum

Thi

ckne

ssin

(mm

)2(

50)

6(15

0)6(

150)

2-1/

2(65

)2(

50)

2(50

)

Car

bon

0.12

-0.2

10.

12-0

.21

0.14

-0.2

10.

15-0

.20

0.10

-0.2

00.

08-0

.14

Man

gane

se0.

45-0

.70

0.45

-0.7

00.

95-1

.30

0.85

-1.1

51.

10-1

.50

1.20

-1.8

Phos

phor

us, m

ax.

0.03

50.

035

0.03

50.

035

0.03

50.

035

Sulfu

r max

.0.

040.

040.

040.

040.

040.

010

Silic

on0.

20-0

.35

0.20

-0.3

50.

15-0

.35

0.20

-0.3

50.

15-0

.35

0.40

-0.6

0N

icke

l1.

20-1

.50

1.20

-1.5

01.

20-1

.50

0.90

-1.1

0-

-C

hrom

ium

-0.

85-1

.20

1.00

-1.5

00.

35-0

.65

--

Mol

ybde

num

0.45

-0.6

00.

45-0

.60

0.40

-0.6

00.

15-0

.25

0.10

-0.3

50.

45-0

.60

Vana

dium

--

0.03

-0.0

80.

03-0

.08

-0.

03-0

.08

Tita

nium

--

--

C-

Zirc

oniu

m-

--

--

-C

oppe

r-

--

--

-Bo

ron

0.00

1-0.

005

0.00

1-0.

005

--

0.00

1-0.

005

0.00

1-0.

005

Col

umbi

um, m

ax.

--

--

0.06

-

AM

ay b

e su

bstit

uted

for p

art o

r all

of ti

tani

um c

onte

nt o

n a

one

for o

ne b

asis

.B

Zirc

oniu

m m

ay b

e re

plac

ed b

y ce

rium

. Whe

n ce

rium

is a

dded

, the

cer

ium

/sul

fur r

atio

sho

uld

be a

ppro

xim

atel

y 1.

5 to

1, b

ased

upo

n he

at a

naly

sis.

CTi

tani

um m

ay b

e pr

esen

t in

leve

ls u

p to

0.0

6% to

pro

tect

the

boro

n ad

ditio

ns.


Steel PlatesTA

BLE

2 te

nsile

and

har

dnes

s re

quire

men

ts

NO

TE 1

- O

n pl

ates

wid

er th

an 2

4 in

. (60

0 m

m),

the

test

spe

cim

en s

hall

be ta

ken

in th

e tra

nsve

rse

dire

ctio

n. (S

ee S

ectio

n 10

and

Spe

cific

atio

n A

6/A

6M.)

NO

TE 2

-Ei

ther

the

full

thic

knes

s re

ctan

gula

r spe

cim

en s

how

n in

Fig

. 3 o

f Met

hods

and

Def

initi

ons

A37

0, o

r the

1/2

-in. (

12.5

-mm

) dia

met

er s

peci

men

sho

wn

in F

ig. 4

of M

etho

ds a

nd D

efin

ition

s A

370

may

be

used

for p

late

s ov

er 3

/4 to

1-1

/2 in

. (20

to 4

0 m

m) i

n th

ickn

ess.

Thic

knes

s, in

. (m

m)

Ulti

mat

e Te

nsile

Stre

ngth

Yiel

d St

reng

th m

in,

Elon

gatio

n in

2 in

.R

educ

tion

Brin

ell

ksi (

MPa

)ks

i (M

Pa)

(50m

m),

of A

rea,

H

ardn

ess

min

, %m

in, %

Num

ber

To 3

/4 (2

0), i

ncl.

110

to 1

30 (7

60 to

895

)10

0 (6

90)

1840

G23

5 to

293

Ove

r 3/4

to 2

-1/2

(20

to 6

5), i

ncl

110

to 1

30 (7

60 to

895

)10

0 (6

90)

1840

G, 5

0H-

Ove

r 2-1

/2 to

6 (6

5 to

150

), in

cl.

100

to 1

30 (6

90 to

895

)90

(620

)16

50H

-

Mea

sure

d at

0.2

% o

ffset

or 0

.5 %

ext

ensi

on u

nder

load

as

desc

ribed

in th

e D

eter

min

atio

n of

Ten

sile

Pro

perti

es s

ectio

n of

Met

hods

and

Def

initi

ons

A37

0.El

onga

tion

and

redu

ctio

n of

are

a no

t req

uire

d to

be

dete

rmin

ed fo

r flo

or p

late

s.Fo

r pla

tes

test

ed in

the

trans

vers

e di

rect

ion,

the

elon

gatio

n m

inim

um p

erce

nt is

redu

ced

by 2

% a

nd th

e re

duct

ion

of a

rea

min

imum

requ

irem

ent i

s re

duce

d by

5 %

.W

hen

mea

sure

d on

the

Fig.

3 (M

etho

ds a

nd D

efin

ition

s a

370)

1-1

/2 in

. (40

mm

) wid

e sp

ecim

en (s

ee N

ote

2 of

this

tabl

e), t

he e

long

atio

n is

det

erm

ined

in a

2 in

. (50

-mm

) gag

e le

ngth

whi

ch in

clud

es th

e fra

ctur

e an

d sh

ows

the

grea

test

elo

ngat

ion.

For n

omin

al th

ickn

ess

unde

r 5/1

6 in

. (8

mm

), a

dedu

ctio

n fro

m th

e sp

ecifi

ed p

erce

ntag

e of

elo

ngat

ion

shal

l be

mad

e fo

r dec

reas

es o

f the

nom

inal

thic

knes

s be

low

5/1

6 in

(8m

m).

See

elon

gatio

n re

quire

men

t adj

ustm

ents

und

er th

e Te

nsio

n Te

sts

sect

ion

ofSp

ecifi

catio

n A

6/A

6M, f

or d

educ

tion

valu

es. H

owev

er, t

he d

educ

tion

may

not

exc

eed

3 %

.Se

e Se

ctio

n 8

of th

is s

peci

ficat

ion.

Whe

n m

easu

red

on th

e Fi

g. 3

(Met

hods

and

Def

initi

ons

A37

0) 1

-1/2

in. (

40 m

m) w

ide,

spe

cim

en (s

ee N

ote

2 of

this

tabl

e).

Whe

n m

easu

red

on th

e Fi

g. 4

(Met

hods

and

Def

initi

ons

A37

0) 1

/2 in

. (12

.5-m

m) r

ound

spe

cim

en (s

ee N

ote

2 of

this

tabl

e).

Steel Plates


A-6

56H

igh

Stre

ngth

Low

Allo

y St

ruct

ural

Ste

el P

late

s w

ith Im

prov

ed F

orm

abili

tyTA

BLE

1 C

HEM

ICA

LR

EQU

IREM

ENTS

CO

MPO

SITI

ON

, %El

emen

tsTy

pe 3

Type

7A

Car

bon,

max

0.18

0.18

Man

gane

se, m

ax1.

651.

65Ph

osph

orus

, max

0.02

50.

025

Sulfu

r, m

ax0.

035

0.03

5Si

licon

, max

0.60

0.60

Vana

dium

0.08

max

0.00

5-0.

15N

itrog

en0.

020

max

0.02

0 m

axC

olum

bium

0.00

5-0.

150.

005-

0.10

AC

olum

bium

or v

anad

ium

, or b

oth,

0.0

05 %

min

. Whe

n bo

th a

re a

dded

, the

tota

l sha

ll be

0.2

0 %

max

.

TAB

LE 2

TEN

SILE

REQ

UIR

EMEN

TSG

rade

50

Gra

de 6

0 G

rade

70

Gra

de 8

0 (3

45)

(415

)(4

85)

(550

)

Yiel

d po

int,

min

, ksi

(MPa

)50

(345

)60

(415

)70

(485

)80

(550

)

Tens

ile s

treng

th, m

in, k

si (M

Pa)

60 (4

15)

70 (4

85)

80 (5

50)

90 (6

20)

Elon

gatio

n in

8 in

. (20

0 m

m),

min

, %B

2017

1412

Elon

gatio

n in

2 in

. (50

mm

),min

, %B

2320

1715

See

spec

imen

Orie

ntat

ion

unde

r the

Ten

sion

Tes

ts s

ectio

n of

Spe

cific

atio

n A

6/A

6 M

.Fo

r pla

tes

wid

er th

an 2

4 in

. (60

0 m

m).

the

elon

gatio

n re

quire

men

t is

redu

ced

two

perc

enta

ge p

oint

s fo

r Gra

de 5

0 (3

45) a

ndth

ree

perc

enta

ge p

oint

s fo

r Gra

des

60, 7

0, a

nd 8

0 (4

15, 4

85, a

nd 5

50).

See

elon

gatio

n re

quire

men

t adj

ustm

ents

in th

eTe

nsio

n Te

sts

sect

ion

of S

peci

ficat

ion

A6

/ A6M

.

A-5

88H

igh

Stre

ngth

Low

Allo

y St

ruct

ural

Ste

el P

late

sTA

BLE

1TE

NSI

LE R

EQU

IREM

ENTS

A

Plat

es a

nd B

ars

Shap

esSt

ruct

ural

Ele

men

ts

For T

hick

ness

esFo

r Thi

ckne

sses

For T

hick

ness

es4

in. a

nd u

nder

Ove

r 4 in

. to

5 in

. inc

l.O

ver 5

in. t

o 8

in. I

ncl.

All G

roup

s(1

00 m

m)

(100

to 1

25 m

m)

(125

to 2

00 m

m)

Tens

ile s

treng

th, m

in, k

si (M

Pa)

70 (4

85)

67 (4

60)

63 (4

35)

70 (4

85)

Yiel

d po

int,

min

ksi

(MPa

)50

(345

)46

(315

)42

(290

)50

(345

)

Elon

gatio

n in

8 in

. (20

0 m

m),

min

, %18

--

18C

Elon

gatio

n in

2 in

. (50

mm

), m

in, %

B21

D.E

.F21

D.E

.F21

D.E

.F21

G

AFo

r pla

tes

wid

er th

an 2

4 in

. (60

0 m

m),

the

test

spe

cim

en is

take

n in

the

trans

vers

e di

rect

ion.

Se

e O

rient

atio

n un

der t

he T

ensi

on T

ests

sec

tion

of S

peci

ficat

ion

A6

/ A6M

.B

See

spec

ifica

tion

A6

/ A6M

CFo

r nom

inal

thic

knes

ses

or d

iam

eter

s un

der 5

/16

in. (

8mm

), a

dedu

ctio

n fro

m th

e sp

ecifi

ed p

erce

ntag

e of

elo

ngat

ion

in 8

in. (

200

mm

) sha

ll be

mad

e fo

r dec

reas

es o

f the

nom

inal

thic

knes

s or

dia

met

er b

elow

5/1

6 in

. (8

mm

).Se

e el

onga

tion

requ

irem

ent a

djus

tmen

ts u

nder

the

Tens

ion

Test

s se

ctio

n of

Spe

cific

atio

n A

6 / A

6M fo

r ded

uctio

n va

lues

.D

Elon

gatio

n no

t req

uire

d to

be

dete

rmin

ed fo

r flo

or p

late

.E

For p

late

s w

ider

than

24

in (6

00 m

m),

the

elon

gatio

n rq

uire

men

t is

redu

ced

two

perc

enta

ge p

oint

s.F

For n

omin

al th

ickn

esse

s or

dia

met

ers

over

3.5

in. (

90 m

m),

a de

duct

ion

from

the

spec

ified

per

cent

age

of e

long

atio

n in

2 in

. (5

0 m

m) s

hall

be m

ade

for i

ncre

ases

of t

he n

omin

al th

ickn

ess

or d

iam

eter

abo

ve 3

.5 in

. (90

mm

). Se

e el

onga

tion

requ

irem

ent

adju

stm

ents

und

er th

e Te

nsio

n Te

sts

sect

ion

of S

peci

ficat

ion

A6

/ Afo

r ded

uctio

n va

lues

.G

For w

ide

flang

e sh

apes

ove

r 426

lb/ft

(634

kg/

m) e

long

atio

n in

2 in

. (50

mm

) of 1

8 %

min

imum

app

lies.

TAB

LE 2

CH

EMIC

AL

REQ

UIR

EMEN

TS (H

EAT

AN

ALY

SIS)

CO

MPO

SITI

ON

, %

Gra

de A

Gra

de B

Gra

de C

Gra

de D

Gra

de K

Car

bon

0.19

max

.0.

20 m

ax0.

15 m

ax0.

10-0

.20

0.17

max

Man

gane

se0.

80-1

.25

0.75

-1.3

50.

80-1

.35

0.75

-1.2

50.

50-1

.20

Phos

phor

us0.

04 m

ax.

0.04

max

.0.

04 m

ax.

0.04

max

.0.

04 m

ax.

Sulfu

r0.

05 m

ax.

0.05

max

.0.

05 m

ax.

0.05

max

.0.

05 m

ax.

Silic

on0.

30-0

.65

0.15

-0.5

00.

15-0

.40

0.50

-0.9

00.

25-0

.50

Nic

kel

0.40

max

0.50

max

0.25

-0.5

0-

0.40

max

Chr

omiu

m0.

40-0

.65

0.40

-0.7

00.

30-0

.50

0.50

-0.9

00.

40-0

.70

Mol

ybde

num

--

--

0.10

max

Cop

per

0.25

-0.4

00.

20-0

.40

0.20

–0.5

00.

30 m

ax0.

30-0

.50

Vana

dium

0.02

-0.1

00.

01-0

.10

0.01

-0.1

0-

-

Zirc

oniu

m-

--

0.05

-0.1

5-

Col

umbi

um-

--

0.04

max

0.00

5-0.

05

Tita

nium

--

--

-

For p

late

s un

der 1

/2 in

. in

thic

knes

s, th

e m

iniu

m c

olum

bium

is w

aive

d


Steel PlatesSA

-203

Nic

kel A

lloy

Stee

l Pre

ssur

e Ve

ssel

Pla

tes

TAB

LE 1

CH

EMIC

AL

REQ

UIR

EMEN

TSC

ompo

sitio

n, %

Elem

ents

Gra

de A

Gra

de B

Gra

de D

Gra

de E

and

F

Car

bon,

max

:up

to 2

in.(5

0mm

) in

thic

knes

s0.

170.

210.

170.

20ov

er 2

to 4

in.(1

00m

m) i

ncl.

in th

ickn

ess

0.20

0.24

0.20

0.23

over

4 in

.(100

mm

) in

thic

knes

s0.

230.

25---

---

Man

gane

se, m

ax:

Hea

t ana

lysi

s:2

in. (

50m

m) a

nd u

nder

0.70

0.70

0.70

0.70

over

2 in

.(50m

m)

0.80

0.80

0.80

0.80

Prod

uct a

naly

sis:

2 in

.(50m

m) a

nd u

nder

0.78

0.78

0.78

0.78

over

2 in

.(50m

m)

0.88

0.88

0.88

0.88

Phos

phor

ous,

max

0.

035

0.03

50.

035

0.03

5

Sulfu

r, m

ax0.

040

0.04

00.

040

0.04

0

Silic

on:

Hea

t ana

lysi

s:0.

15-0

.40

0.15

-0.4

00.

15-0

.40

0.15

-0.4

0Pr

oduc

t ana

lysi

s:0.

13-0

.45

0.13

-0.4

50.

13-0

.45

0.13

-0.4

5

Nic

kel:

Hea

t ana

lysi

s:2.

10-2

.50

2.10

-2.5

03.

25-3

.75

3.25

-3.7

5Pr

oduc

t ana

lysi

s:0.

13-0

.45

0.13

-0.4

53.

18-3

.82

3.18

-3.8

2

Appl

ies

to b

oth

heat

and

pro

duct

ana

lysi

s

TAB

LE 2

TEN

SILE

REQ

UIR

EMEN

TSG

rade

s A

and

DG

rade

s B

and

EG

rade

F

ksi

[MPa

]ks

i[M

Pa]

ksi

[MPa

]

Tens

ile S

treng

th2

in. (

50m

m) a

nd u

nder

65-8

5[4

50-5

85]

70-9

0[4

85-6

20]

80-1

00[5

50-6

90]

over

2 in

. (50

mm

)65

-85

[450

-585

]70

-90

[485

-620

]75

-95

[515

-655

]

Yiel

d st

reng

th, m

in.

2 in

. (50

mm

) and

und

er37

[225

]40

[275

]55

[380

]ov

er 2

in. (

50m

m)

37[2

25]

40[2

75]

50[3

45]

Elon

gatio

n in

8 in

. (20

0mm

)m

in, %

1917

...

Elon

gatio

n in

2 in

. (50

mm

)m

in, %

2321

20

See

Spec

ifica

tion

A20

/ A20

MSe

e 7.

1.1

Steel Plates


TAB

LE 1

TEN

SILE

REQ

UIR

EMEN

TS F

OR

CLA

SS 1

PLA

TES

Gra

des

2 an

d 12

Gra

de 1

1G

rade

s 22

,21

, 5, 7

, 9

Tens

ile s

treng

th, k

si [M

Pa]

55 to

80

60 to

85

60 to

85

[380

to 5

50]

[415

to 5

85]

[415

to 5

85]

Yiel

d st

reng

th m

in. k

si [M

Pa]

3335

30

Elon

gatio

n in

8 in

. [20

0 m

m],

min

.%A

1819

Elon

gatio

n in

2 in

. [50

mm

], m

in. %

B22

2218

Red

uctio

n of

are

a, m

in. %

45B

40C

A See

Spec

ifica

tion

A20

/ A20

M, e

long

atio

n ad

just

men

ts •

B Mea

sure

d on

roun

d te

st s

peci

men

s • C

Mea

sure

d on

flat

spe

cim

en

TAB

LE 2

TEN

SILE

REQ

UIR

EMEN

TS F

OR

CLA

SS 2

PLA

TES

Gra

de 2

Gra

de 1

1G

rade

12

Gra

des

22,

Gra

de 9

121

, 5, 7

, 9

Tens

ile s

treng

th. k

si[M

Pa]

70 to

90

75 to

100

65 to

85

75 to

100

85 to

110

[485

to 6

20]

[515

to 6

90]

[450

to 5

85]

515

to 6

90]

[585

to 7

60]

Yiel

d st

reng

th.m

in.k

si[M

Pal]/

(0,2

%of

fset

)45

[310

]45

[310

]40

[275

]45

[310

]60

[415

]

Elon

gatio

n in

8 in

. [20

0mm

], m

in %

B18

1819

......

Elon

gatio

n in

2 in

. [50

mm

], m

in. %

B22

2222

1818

Red

uctio

n of

are

a, m

in. %

......

......

45C

......

......

40D

A Not

app

licab

le to

ann

eale

d m

ater

ial

B See

Spec

ifica

tion

A20

/ A20

M, e

long

atio

n ad

just

men

tsCM

easu

red

on ro

und

test

spe

cim

ens

DM

easu

red

on fl

at s

peci

men

SA-2

04C

arbo

n-M

olyb

denu

m A

lloy

Stee

l Pre

ssur

e Ve

ssel

Pla

tes

SA-3

87C

hrom

ium

- Mol

ybde

num

Allo

y St

eel P

ress

ure

Vess

el P

late

s

TAB

LE 1

CH

EMIC

AL

REQ

UIR

EMEN

TSC

ompo

sitio

n, %

Elem

ents

Gra

de A

Gra

de B

Gra

de C

Car

bon,

max

:up

to 1

in. [

25m

m] i

ncl.

in th

ickn

ess

0.18

0.20

0.23

Ove

r 1 in

. to

2 in

.[50m

m] i

ncl.

in th

ickn

ess

0.21

0.23

0.26

Ove

r 2 in

. to

4 in

[100

mm

] inc

l. in

thic

knes

s0.

230.

250.

28O

ver 4

in [1

00m

m] i

ncl.

in th

ickn

ess

0.25

0.27

0.28

Man

gane

se, m

ax:

Hea

t ana

lysi

s:0.

900.

900.

90Pr

oduc

t ana

lysi

s:0.

980.

980.

98

Phos

phor

us, m

ax0.

035

0.03

50.

035

Sulfu

r, m

ax0.

040

0.04

00.

040

Silic

on:

Hea

t ana

lysi

s:0.

15-0

.40

0.15

-0.4

00.

15-0

.40

Prod

uct a

naly

sis:

0.13

-0.4

50.

13-0

.45

0.13

-0.4

5

Mol

ybde

num

:H

eat a

naly

sis:

0.45

-0.6

00.

45-0

.60

0.45

-0.6

0Pr

oduc

t ana

lysi

s:0.

41-0

.64

0.41

-0.6

40.

41-0

.64

Appl

ies

to b

oth

heat

and

pro

duct

ana

lysi

s

TAB

LE 2

TEN

SILE

REQ

UIR

EMEN

TSG

rade

AG

rade

BG

rade

Cks

i[M

Pa]

ksi

[MPa

]ks

i[M

Pa]

Tens

ile s

treng

th65

-85

[450

-585

]70

-90

[485

-620

]75

-95

[515

-655

]

Yiel

d st

reng

th, m

in A

37[2

25]

40[2

75]

43[2

95]

Elon

gatio

n in

8 in

.19

B17

B16

B[2

00m

m],

min

. %

Elon

gatio

n in

2 in

.23

B21

B20

B[5

0mm

], m

in. %

A Det

erm

ined

by

eith

er th

e 0,

2% o

ffset

met

hod

or th

e 0,

5% e

xten

sion

-und

er-lo

ad m

etho

dB Se

e Sp

ecifi

catio

n A

20/ A

20 M


Steel PlatesTA

BLE

3 C

HEM

ICA

LR

EQU

IREM

ENTS

Com

posi

tion

Elem

ents

Gra

de 2

Gra

de 1

2G

rade

11

Gra

de 2

2G

rade

21

Gra

de 5

Gra

de 7

Gra

de 9

Gra

de 9

1

Car

bon,

max

:H

eat a

naly

sis

0.05

-0.2

10.

05-0

.17

0.05

-0.1

70.

05-0

.15A

0.05

-0.1

5A0.

15 m

ax0.

15 m

ax0.

15 m

ax0.

08-0

.12

Prod

uct a

naly

sis

0.04

-0.2

10.

04-0

.17

0.04

-0.1

70.

04-0

.15A

0.04

-0.1

5A0.

15 m

ax0.

15 m

ax0.

15 m

ax0.

06-0

.15

Man

gane

se:

Hea

t ana

lysi

s0.

55-0

.80

0.40

-0.6

50.

04-0

.65

0.30

-0.6

00.

30-0

.60

0.30

-0.6

00.

30-0

.60

0.30

-0.6

00.

30-0

.60

Prod

uct a

naly

sis

0.50

-0.8

80.

35-0

.73

0.35

-0.7

30.

25-0

.66

0.25

-0.6

60.

25-0

.66

0.25

-0.6

60.

25-0

.66

0.25

-0.6

6

Phos

phor

us, m

ax:

Hea

t ana

lysi

s0.

035

0.03

50.

035

0.03

50.

035

0.04

00.

030

0.03

00.

025

Prod

uct a

naly

sis

0.03

50.

035

0.03

50.

035

0.03

50.

040

0.03

00.

030

0.02

5

Sulfu

r, m

ax:

Hea

t ana

lysi

s0.

040

0.04

00.

040

0.03

50.

035

0.03

00.

030

0.03

00.

010

Prod

uct a

naly

sis

0.04

00.

040

0.04

00.

035

0.03

50.

030

0.03

00.

030

0.01

2

Silic

on:

Hea

t ana

lysi

s0.

15-0

.40

0.15

-0.4

00.

50-0

.80

0.50

max

0.50

max

0.50

max

1.00

max

1.00

max

0.20

-0.5

0Pr

oduc

t ana

lysi

s0.

13-0

.45

0.13

-0.4

50.

44-0

.86

0.50

max

0.50

max

0.50

max

1.05

max

1.05

max

0.18

-0.5

6

Chr

omiu

m:

Hea

t ana

lysi

s0.

50-0

.80

0.80

-1.1

51.

00-1

.50

2.00

-2.5

02.

75-3

.25

4.00

-6.0

06.

00-8

.00

8.00

-10.

008.

00-9

.50

Prod

uct a

naly

sis

0.46

-0.8

50.

74-1

.21

0.94

-1.5

61.

88-2

.62

2.63

-3.3

73.

90-6

.10

5-90

-8.1

07.

90-1

0.10

7.90

-9.6

0

Mol

ybde

num

:H

eat a

naly

sis

0.45

-0.6

00.

45-0

.60

0.45

-0.6

50.

90-1

.10

0.90

-1.1

00.

45-0

.65

0.45

-0.6

50.

90-1

.10

0.85

-1.0

5Pr

oduc

t ana

lysi

s0.

40-0

.65

0.40

-0.6

50.

40-0

.70

0.85

-1.1

50.

85-1

.15

0.40

-0.7

00.

40-0

.70

0.85

-1.1

50.

80-1

.10

Nic

kel,

max

:H

eat a

naly

sis

......

......

......

......

0.40

Prod

uct a

naly

sis

......

......

......

......

0.43

Vana

dium

:H

eat a

naly

sis

......

......

......

......

0.18

-0.2

5Pr

oduc

t ana

lysi

s...

......

......

......

...0.

16-0

.27

Col

umbi

um:

Hea

t ana

lysi

s...

......

......

......

...0.

06-0

.10

Prod

uct a

naly

sis

......

......

......

......

0.05

-0.1

1

Nitr

ogen

:H

eat a

naly

sis

......

......

......

......

0.03

0-0.

070

Prod

uct a

naly

sis

......

......

......

......

0.02

5-0.

080

Alum

iniu

m, m

ax:

Hea

t ana

lysi

s...

......

......

......

...0.

04Pr

oduc

t ana

lysi

s...

......

......

......

...0.

05

ATh

e ca

rbon

con

tent

for p

late

s ov

er 5

in. (

125

mm

) in

thic

knes

s is

0.1

7 m

ax o

n pr

oduc

t ana

lysi

s.

Steel Plates


Tabl

e 1C

hem

ical

Req

uire

men

tsC

ompo

sitio

n, %

Elem

ents

Gra

de A

Gra

de B

Gra

de C

Car

bon,

max

A0.

170.

220.

28

Man

gane

se, m

axH

eat a

naly

sis

0.90

0.90

0.90

Prod

uct a

naly

sis

0,98

0.98

0.98

Phos

phor

us, m

axA

0.03

50.

035

0.03

5

Sulfu

r, m

axA

0.04

00.

040

0.04

0

A Appl

ied

to b

oth

heat

and

pro

duct

ana

lysi

s

Tabl

e 2

Tens

ile R

equi

rem

ents

Gra

de A

Gra

de B

Gra

de C

ksi

(MPa

)ks

i(M

Pa)

ksi

(MPa

)

Tens

ile s

treng

th45

-65

(310

-450

)50

-70

(345

-485

)55

-75

(380

-515

)

Yiel

d st

reng

th, m

inA

24(1

65)

27(1

85)

30(2

05)

Elon

gatio

n in

8 in

. or

2725

23(2

00 m

m) m

in. %

B

Elon

gatio

n in

2 in

. or

3028

27(5

0 m

m) m

in. %

A Det

erm

ined

by

eith

er th

e 0.

2% o

ffset

met

hod

or th

e 0.

5% e

xten

sion

-und

er-lo

ad m

etho

d

B See

Spec

ifica

tion

A20/

A20M

SA-5

16C

arbo

n St

eel P

ress

ure

Vess

el P

late

s fo

r Mod

erat

e &

Low

er T

empe

ratu

res

SA-2

85/S

A-2

83 L

ow &

Inte

rmed

iate

Ten

sile

Str

engt

h C

arbo

n St

eel P

ress

ure

Vess

el P

late

s

Tabl

e 1

Che

mic

al R

equi

rem

ents

Com

posi

tion,

%

Gra

de 5

5G

rade

60

Gra

de 6

5G

rade

70

(Gra

de 3

80)

(Gra

de 4

15)

(Gra

de 4

50)

(Gra

de 4

85)

Elem

ents

Car

bon,

max

A :1/

2 in

. (12

.5 m

m) a

nd u

nder

0.18

0.21

0.24

0.27

Ove

r 1/2

in. t

o 2

in. (

12.5

to 5

0 m

m) i

ncl.

0.20

0.23

0.26

0.28

Ove

r 1/2

in. t

o 4

in. (

50 to

100

mm

) inc

l.0.

220.

250.

280.

30O

ver 4

to 8

in. (

100

to 2

00 m

m) i

ncl.

0.24

0.27

0.29

0.31

Ove

r 8 in

. (20

0 m

m)

0.26

0.27

0.29

0.31

Man

gane

se:

1/2

in (1

2.5)

and

und

er:

Hea

t ana

lysi

sB0.

60-0

.90

0.60

-0.9

00.

85-1

.20

0.85

-1.2

0Pr

oduc

t ana

lysi

sB0.

55-0

.98

0.55

-0.9

80.

79-1

.30

0.79

-1.2

0

Ove

r 1/2

in (1

2.5)

:H

eat a

naly

sis

0.60

-1.2

00.

85-1

.20

0.85

-1.2

00.

85-1

.20

Prod

uct a

naly

sis

0.55

-1.3

00.

79-1

.30

0.79

-1.3

00.

79-1

.30

Phos

phor

us. m

axA

0.03

50.

035

0.03

50.

035

Sulfu

r. m

axA

0.04

0.04

0.04

0.04

Silic

on:

Hea

t ana

lysi

s0.

15-0

.40

0.15

-0.4

00.

15-0

.40

0.15

-0.4

0Pr

oduc

t ana

lysi

s0.

13-0

.45

0.13

-0,4

50.

13-0

.45

0.13

-0.4

5

A Appl

ies

to b

oth

heat

and

pro

duct

ana

lysi

s • B G

rade

60

plat

es 1

/2 in

. (12

.5 m

m) a

nd u

nder

thic

knes

s m

ay h

ave

0.85

-1.2

0%m

anga

nese

on

heat

ana

lysi

s an

d 0.

79-1

.30%

man

gane

se o

n pr

oduc

t ana

lysi

s

Tabl

e 2

Tens

ile R

equi

rem

ents

Gra

de55

(380

)60

(415

)65

(450

)70

(485

)

Tens

ile s

treng

th. k

si (M

Pa)

55-7

560

-80

65-8

570

-90

(380

-515

)(4

15-5

50)

(450

-585

)(4

85-6

20)

Yiel

d st

reng

th. m

inB

ksi (

MPa

)30

(205

)32

(220

)35

(240

)38

(260

)

Elon

gatio

n in

8 in

. (20

0 m

m) m

in. %

23A

21A

19A

17A

Elon

gatio

n in

2 in

. (50

mm

) min

. %27

A25

A23

A21

A

A See

Spec

ifica

tion

A20/

A20M

.

B Det

erm

ined

by

eith

er th

e 0.

2% o

ffset

met

hod

or th

e 0.

5% e

xten

sion

-und

er-lo

ad m

etho

d.


Steel Plates

Tabl

e 1

Che

mic

al R

equi

rem

ents

Elem

ent

Com

posi

tion,

%El

emen

tC

ompo

sitio

n, %

Car

bon.

max

A0.

24

Man

gane

se:

Hea

t ana

lysi

s0.

70-1

.35

Prod

uct a

naly

sis

0.64

-1.4

6

Ove

r 1 in

. (40

mm

) in

thic

knes

s:H

eat a

naly

sis

1.00

-1.6

0Pr

oduc

t ana

lysi

s0.

92-1

.72

Phos

phor

us, m

axA

0.03

5

Sulfu

r, m

axA

0.04

0

Silic

on:

Hea

t ana

lysi

s0.

15-0

.50

Prod

uct a

naly

sis

0.13

-0.5

5

Cop

per,

max

:H

eat a

naly

sis

0.35

Prod

uct a

naly

sis

0,38

Nic

kel,

max

:H

eat a

naly

sis

0.25

Prod

uct a

naly

sis

0.28

Chr

omiu

m, m

ax:

Hea

t ana

lysi

s0.

25Pr

oduc

t ana

lysi

s0,

29

Mol

ybde

num

, max

:H

eat a

naly

sis

0.08

Prod

uct a

naly

sis

0.09

A Appl

ies

to b

oth

heat

and

pro

duct

ana

lysi

s

B Man

gane

se m

ay e

xcee

d 1.

35 o

n he

at a

naly

sis

up to

am

axim

um o

f 1.6

0, p

rovi

ded

that

the

heat

ana

lysi

s ca

rbon

equi

vale

nt d

oes

not e

xcee

d 0.

57%

SA-5

15C

arbo

n St

eel P

ress

ure

Vess

el P

late

s fo

r Int

erm

edia

te &

Hig

her T

empe

ratu

res

SA-5

37H

eat T

reat

ed C

arbo

n - M

anga

nese

- Si

licon

Ste

el P

ress

ure

Vess

el P

late

s

Tabl

e 1

Che

mic

al R

equi

rem

ents

Com

posi

tion,

%

Elem

ents

Gra

de 5

5G

rade

60

Gra

de 6

5G

rade

70

(Gra

de 3

80)

(Gra

de 4

15)

(Gra

de 4

50)

(Gra

de 4

85)

Car

bon,

max

A :1

in. (

25 m

m) a

nd u

nder

0.20

0.24

0.28

0.31

Ove

r 1 to

2 in

. (25

to 5

0 m

m),

incl

.0.

220.

270.

310.

33O

ver 2

to 4

in. (

50 to

100

mm

), in

cl.

0.24

0.29

0.33

0.35

Ove

r 4 to

8 in

. (10

0 to

200

mm

), in

cl.

0.26

0.31

0.33

0.35

Ove

r 8 in

. (20

0 m

m)

0.28

0.31

0.33

0.35

Man

gane

se, m

ax:

Hea

t ana

lysi

s0.

900.

900.

901.

20Pr

oduc

t ana

lysi

s0.

980.

980.

981.

30

Phos

phor

us, m

axA

0.03

50.

035

0.03

50.

035

Sulfu

r, m

axA

0.04

0.04

0.04

0.04

Silic

on Hea

t ana

lysi

s0.

15-0

.40

0.15

-0.4

00.

15-0

.40

0.15

-0.4

0Pr

oduc

t ana

lysi

s0.

13-0

.45

0.13

-0.4

50.

13-0

.45

0.13

-0.4

5

A Appl

ies

to b

oth

heat

and

pro

duct

ana

lysi

s

Tabl

e 2

Tens

ile R

equi

rem

ents

Gra

de55

(380

)60

(415

)65

(450

)70

(485

)

Tens

ile s

treng

th. k

si (M

Pa)

55-7

560

-80

65-8

570

-90

(380

-515

)(4

15-5

50)

(450

-585

)(4

85-6

20)

Yiel

d st

reng

th. m

in k

si (M

Pa)

30(2

05)

32(2

20)

35(2

40)

38(2

60)

Elon

gatio

n in

8 in

. (20

0 m

m) m

in. %

23A

21A

19A

17A

Elon

gatio

n in

2 in

. (50

mm

) min

. %27

A25

A23

A21

A

A See

Spec

ifica

tion

A20/

A20M

.

Tabl

e 2

Tens

ile R

equi

rem

ents

Cla

ss 1

Cla

ss 2

ksi(M

Pa)

ksi(M

Pa)

Tens

ile s

treng

th:

2-1/

2 in

. and

und

er (6

5 m

m a

nd u

nder

)70

-90

(485

-620

)80

-100

(550

-690

)

Ove

r 2-1

/2 to

4 in

., in

cl. (

Ove

r 65

to 1

00 m

m, i

ncl.)

65-8

5 (4

50-5

85)

75-9

5 (5

15-6

55)

Ove

r 4 to

6 in

., in

cl. (

Ove

r 100

to 1

50 m

m, i

ncl)

...70

-90

(485

-620

)

Yiel

d st

reng

th, m

in:

2 1/

2 in

. and

und

er (6

5 m

m a

nd u

nder

)50

(345

)60

(415

)

Ove

r 2-1

/2 to

4 in

., in

cl (O

ver 6

5 to

100

mm

, inc

l)45

(310

)55

(380

)

Ove

r 4 to

6 in

., in

cl. (

Ove

r 100

to 1

50 m

m, i

ncl.)

...46

(315

)

Elon

gatio

n in

2 in

. (50

mm

), m

in. %

:4

in. (

100

mm

) and

und

er22

22O

ver 4

in. (

100

mm

)...

20El

onga

tion

in 8

in. (

200

mm

), m

in, %

18A

...

A See

Spec

ifica

tion

A20

/ A20

M.


German Specification (DIN 17100)

Steels for General Structural Purposes

Grade Chemical Composition in %C* Si max Mn P max S max N*

ST 33 0,060 0,050 0,007ST 37,2 < 16 mm 0,050 0,050 0,009

0,17> 16 mm0,20

U ST 37.2 < 16 mm 0,050 0,050 0,0070,17> 16 mm0,20

R ST 37.2 < 40 mm 0,050 0,050 0,0090,17> 40 mm0,20

ST 37.3 0,17 0,040 0,040

R ST 44.2 < 40 mm 0,050 0,050 0,0090,21> 40 mm0,22

ST 44.3 0,20 0,040 0,040ST 52.3 < 16 mm* 0,55 1,60 0,040 0,040

0,20ST 50.2 0,30* 0,050 0,050 0,009

approx. valuesST 60.2 0,40* 0,050 0,050 0,009

approx. valuesSt 70.2 0,50* 0,050 0,050 0,009

approx. values

Grade Mechanical PropertiesTensile Yield Strength (Min) N/mm Charpy V Notch NormalStrength (at plate thickness shown in mm) SupplyN/mm < 16 > 16 < 40 > 40 < 63 > 63 < 80 < 80 < 100 Joules C Condition

ST 33 290 185 > 16 < 25 ARmin 175

ST 37,2 340/ 470 235 225 215 205 195 27 < 16 mm AR+ 20

U ST 37.2 340/ 470 235 225 215 205 195 27 < 16 mm AR or N+ 20

R ST 37.2 340/ 470 235 225 215 205 195 27 < 63 mm AR or N+ 20

ST 37.3 340/ 470 235 225 215 205 195 27 U: + 0 NN: - 20

R ST 44.2 410/ 540 275 265 255 245 235 27 + 20 AR or N

ST 44.3 410/ 540 275 265 255 245 235 27 U: + 0 NN: - 20

ST 52.3 490/ 630 355 345 335 325 315 27 U: + 0 NN: - 20

ST 50.2 470/ 610 295 285 275 265 255 N

ST 60.2 570/ 710 335 325 315 305 295 N

St 70.2 670/ 830 365 355 345 335 325 N


British Standard 1501 (1970)

Steels for Fired and Unfired Pressure Vessels: Plates Part 2: 1970: Alloy Steels

Desig- Compostion ( Maxima unless stated)

nation Grade C Si Mn P S Cr Cu Mo Ni Others

1501-261 0,10/0,17 0,10 0,40 0,040 0,040 0,25 0,30 0,40/0,60 0,30 B 0,001/0,0051501-271 0,11/0,17 0,40 1,00/1,50 0,040 0,040 0,40/0,70 0,30 0,20/0,28 0,70 V 0,04/0,121501-281 0,09/0,15 0,40 0,90/1,30 0,040 0,040 0,40/0,70 0,30 0,20/0,28 0,70/1,00 V 0,04/0,12

Nb 0,10N 0,015

1501-282 0,12/0,17 0,40 0,90/1,30 0,040 0,040 0,30/0,70 0,30 0,30/0,40 1,40/1,60 V 0,06/0,121501-503 0,15 0,10/0,35 0,30/0,80 0,025 0,030 0,30 0,30 0,10 3,25/3,75 Total Al 0,020 1501-509 0,10 0,10/0,30 0,30/0,80 0,025 0,030 0,30 0,20 8,75/9,751501-510 0,10 0,10/0,30 0,30/0,80 0,025 0,030 0,30 0,20 8,75/9,751501-620 27 0,09/0,15 0,10/0,40 0,40/0,70 0,040 0,040 0,70/1,20 0,30 0,45/0,65 0,30 Sn 0,03

31 0,12/0,18 0,10/0,40 0,40/0,70 0,040 0,040 0,70/1,20 0,30 0,45/0,65 0,30 Sn 0,031501-621 0,09/0,15 0,15/0,35 0,40/0,70 0,040 0,040 1,00/1,50 0,30 0,45/0,65 0,30 Sn 0,031501-622 31 0,10/0,15 0,20/0,50 0,40/0,80 0,040 0,040 2,00/2,50 0,30 0,90/1,20 0,30 Sn 0,03

31 0,13/0,18 0,20/0,50 0,40/0,80 0,040 0,040 2,00/2,50 0,30 0,90/1,20 0,30 Sn 0,03

Desig- Tensile Yield Max Bend Platenation Grade Treatment Strength Stress El%on Radius Thickness

tonf/in tonf/in 5,65 So (180° Bend) in

1501-261 N 36/43 29 16 1 1/2t <227 16 1 1/2t

> 2 < 3 1/21501-271 N & T 38/45 30 16 1 1/2t < 3/8

38/44 30 16 1 1/2t > 3/8 < 136/44 27 16 1 1/2t > 1 < 336/44 25 16 1 1/2t > 3 < 6

1501-281 N & T 38/45 30 16 1 1/2t < 3/838/44 30 16 1 1/2t > 3/8 < 136/44 27 16 1 1/2t > 1 < 336/44 25 16 1 1/2t > 3 < 6

1501-282 N & T or 38/46 32 18 1 1/2t < 3/8DN & T 38/46 31 18 1 1/2t > 3/8 < 1

38/46 29 18 1 1/2t > 1 < 337/45 27 18 1 1/2t > 3 < 6

1501-503 N & T or Q & T 29 17 20 1t < 1 1/21501-509 DN & T 45 34 18 1t < 1

or Q & T 45 34 18 1 1/2t > 1 < 21501-510 Q & T 45 38 18 1t < 1

45 38 18 1 1/2t > 1 < 21501-620 27 N & T 27/35 18,5 21 1 1/2t < 2

27/35 18,5 19 1 1/2t > 2 < 631 N & T 31/39 22 18 2t < 2

31/39 22 16 2t > 2 < 329/37 20,5 16 2t > 3 < 6

1501-621 N & T 31/39 22 18 1 1/2t < 231/39 22 16 1 1/2t > 2 < 329/37 20,5 16 1 1/2t > 3 < 429/37 20,5 16 2t > 4 < 6

1501-622 31 N & T 31/39 18 18 1 1/2t < 231/39 18 16 1 1/2t > 2 < 431/39 18 16 2t > 4 < 6

45 N & T 45/53 36 15 2t < 2 1/245/53 36 15 3t > 2 1/2 < 6

If Al is used for deoxidation purposes, the total Al content of the steel shall not exceed 0,010%.0,2% Proof Stress Values



Steels for Fired and Unfired Pressure Vessels: Plates Part 2: 1970: Alloy Steels - Minimum Yield Stresses at Elevated Temperatures and Impact Properties

Desig- Minimum Yield Stress or 0.2 % Proof Stress, tonf/in at temperature °C Plate Thick-

nation Grade 100 150 200 250 300 350 400 450 500 550 ness in mm

1501-261 27,0 27,0 27,0 27,0 26,2 25,4 24,4 23,5* 22,4* < 225,0 25,0 25,0 25,0 24,2 23,4 22,4 21,5* 20,4* > 2 < 3 1/2

1501-271 27,2 26,3 25,8 25,2 24,2 23,5 22,7 22,5 20,3 < 126,0 25,2 24,6 24,1 22,9 22,2 21,5 21,3 19,5 > 1 < 323,5 22,6 22,1 21,5 20,1 19,5 18,9 18,7 17,2 > 3 < 6

1501-281 27,2 26,3 25,8 25,2 24,2 23,5 22,7 22,5 20,3 < 126,0 25,2 24,6 24,1 22,9 22,2 21,5 21,3 19,5 > 1 < 323,5 22,6 22,1 21,5 20,1 19,5 18,9 18,7 17,2 > 3 < 6

1501-282 29,0 28,0 27,0 26,0 25,0 24,0 23,5 22,6 20,5 < 128,0 27,0 26,0 25,0 24,0 23,0 22,5 21,5 19,5 > 1 < 326,0 25,0 24,0 22,5 21,0 20,5 20,0 19,5 17,5 > 1 < 6

1501-620 27 15,1 14,5 13,7 12,0 10,2 9,7 9,4 9,2 9,1 9,0 < 631 19,0 18,2 17,3 16,1 14,7 13,9 13,5 13,0 12,6 12,1 < 3

17,0 16,4 15,5 14,2 12,5 11,8 11,4 11,2 10,9 10,6 > 3 < 61501-621 19,0 18,2 17,3 16,1 14,7 13,9 13,5 13,0 12,6 12,1 < 3

17,0 16,4 15,5 14,2 12,5 11,8 11,4 11,2 10,9 10,6 > 3 < 61501-622 31 14,8 14,0 13,3 13,0 12,8 12,5 12,0 11,4 10,5 9,4 < 6

45 31,8 31,1 30,6 30,2 29,8 29,5 29,1 27,4 23,8 17,4 < 6

Desig- Transverse Charpy U kgt/cm Longitudinal Charpy V Notch Impact Plate

nation RT Values ft. ibf at a temperature °C Thickness

5 mm Notch 3mm NotchRT 0 - 10 - 20 - 40 - 50 - 80 -100 -160 -196 in mm

1501-261 5 6 < 3 1/230 < 120 > 1 < 215 > 2

1501-271 5 6 30 20 < 6

1501-281 9 10 50 40 20 < 6

1501-282 7 8,4 60 50 30 20 < 6

1501-503 25 13 < 1 1/2

1501-509 50 35 25 < 220 < 2

1501-510 50 35 25 < 220 < 2

* Steel grade 261 is not generally recommended for use at temperatures above 400°C



Continuously Hot-Dip Coated and Iron-Zinc Alloy Coated Steel: Wide Strip Sheet/ Plate and Slide WiteStrip

Grade Quality Composition (max) Tensile Strength Material Thicknesses

Rm N/mm for a < 70 mm > 70 mm

Thickness of El% El%

C Mn S < 3 mm > 3mm 50 mm 200 mm 50 mm 200 mm

Z1 CommercialZ2 Profiling and

Bending 500 max 500 maxZ3 Drawing 420 max 440 max 24 14 26 16Z4 Special

Drawing 380 max 390 max 31 19 33 21Z5 Special

Drawing(non ageing) 380 max 380 max 31 19 33 21

Tensile YieldStrength StressRm RmN/mm N/mm

Z22 Structural 0,15 0,60 0,040 (290) 220 20 12 22 14Z25 Structural 0,16 0,60 0,040 (350) 250 19 11 21 13Z28 Structural 0,20 0,80 0,040 (390) 280 18 10 20 12Z35 Structural 0,25 1,50 0,040 (450) 350 15 9 17 11

Z55. Structural 0,16 0,60 0,040 (560) 550

Strengthening elements other than carbon and /or manganese may be added to achieve the specified mechanical popertiesGrade Z55 is in the unannealed condition and therefore has limited ductility

() Figures in brackets () are for information

Handling Reasonable care must be taken in to avoid edge damage or excessive sratching of the surface during handling. Also the number of coils or sheet packs which are stored on top of each other shouldbe limited. Gloves should be worn handling light gauge sheets.

StorageHot-dip zinc coated steel, once freely exposed to the air, has a life of many years depending on the environment.However, if moisture is trapped between the laps of a coil or between sheets in a strack then the zinc coating can quickly deteroriate and water staining (white rust) may occur. Storage thereforeshould be indoors, preferably in an area that is clean, dry and away from any sources of chemical pollution.Condensation due to rapid changes in temperature must be avoided and storage should therefore preferably be at an even temperature above the dew point.Always stack on wodden or metal skids so that the packs are not in contact with the ground.To reduce the risk of white rust during transport and storage normal spangle and minimised spangle hot-zip zinc coated steel is usually supplied with a special chromate surface treatment. However,smooth finish hot-dip zinc coated steel may not have this treatment and whereever possible should be specified oiled. Oiling is particularly recommended as an protection for all surface finisheswhere storage conditions are likely to be difficult. Special evaporative oils are available which quickly dry off to produce a non-slip surface. Further details concerning the protection of hot-dip zinccoated steel by oiling are available on request.


Galvanizing Technical Summary

Galvatite Coating Minimum Available Corrosion Painting Welding SolderingSteel Type Coating Surface Resistance and BrazingGrade Heavy Mass Weight Finish Fusion Resistance(Quality) Duty G/M (Triple

Coatings Spot Test) Spangle Recommendedfor severe

Z1 Minimised exposure Z2 Spangle conditions Z22 or where Z25 G 350 350 Smooth long life withoutZ28 Extra painting is Z35 Smooth required. Z55 Spangle In any given Z1 environmentZ22 life expectancy RequiresZ25 G 350 450 is proportional specialZ28 G 600 600 Spangle to the mass of priming orZ35 zinc present pretreatmentZ55 G 450 450 for good

standard ofStandard Can be used paintCoating Spangle in some exterior performance.

Z1 Minimised applications MinimisedZ2 Spangle without painting. spangle orZ3 Smooth Painting smoothZ22 G 275 275 Extra recommended finishesZ25 Smooth for severe recommendedZ28 Spangle & exposure whereZ35 Minimised conditions or appearanceZ55 Spangle where long life of paint film

is required. is important.Light Coatings Spangle

Z1Z2Z3 Minimised Z4 SpangleZ5 G100 100Z22 G 200 200 SmoothZ25Z28 Extra SmoothZ35 Spangle andZ55 Minimised

Spangle Suitable forIron-Zinc exterior useAlloy when paintedCoating Provides

Z1 excellent paintZ2 adhesion.Z3 Many stovingZ4 paints can beZ5 1Z 100 100 Regular direct-onZ22 1Z 200 180 Smooth appliedZ25 without theZ28 need for specialZ35 primers or

pretreatment.Smooth surfacerecommendedfor high qualityfinish.

NB Combinations of steel quality, coating type and surface finish other than those listed above may be available by special arrangement. Enquire for detailed advice.

A Zinc coatings. Brazing operations can be readily carreid out using potassium fluoride base fluxes when usig silver brazing alloys (silver solders). borate base fluxes are recommended for use with copper-zinc base brazing alloys.

B IZ coatings. Pretreatment of surface by immersion in a solution of sodium hydroxide aids soldering and allows the use of moderately active fluxes. Comments on brazing are the same as for zinc coatings.

Easily and satisfactorilywelded using most wel-ding techniques but MiGCO2 particulary recom-mended. Traversespeed is recuced relati-ve to mild steel. Fumeextraction equipmentshould be provided.Weld areas can be pro-tected with zinc richpaints, zinc solders orby zinc spraying wherecoating is damaged.

Can be satisfactonlywelded but requires hig-her weld currents, hig-her electrode pressureand longer weld timesthan mild steel Zincpick-up on electrodescan reduce tip life andnecessitates regulardressing. Particularlywith the heavy zinc coa-tings (Classes G350.G450 & G600). Can beseam welded providedsuitable equipment isused. Projection wel-ding gives good results.

Superior to other zinccoatings in that electro-de contamination is re-duced. Welding para-meters are nearer thosefor mild steel. Can beseam welded providedsuitable equipment isused. Projection wel-ding gives good results.

Can be satisfactory sol-dered. Active fluxes and40 % tin. 60% lead sol-ders are recommended.Care should be takenthat flux residues are re-moved after soldering.

Special fluxes such aszinc ammonium chlori-de or amino-boratesmust be used to ensureproper wetting of IZ sur-face. See notes Aand B.

Inquire for detailed service.

W.-Nr. Germany Belgium France U.K. Italy Japan Sweden Russia Spain USADIN NBN AFNOR B.S. UNI JIS SS GOST UNE AISI/SAE/ASTM


Comparison of International Standards

1.028 UST34-2 --- A34-2 --- Fe330 SS330 ---

Fe330 B FU

1.034 RST34-2 --- A34-2 NE 1449 34/20 HR, Fe330 B FN --- --- St2sp --- ---

HS,CR,CS

1.035 Fe310-0 FE310-0 A33 Fe310-0 Fe320 --- 1300 St0 A310-0 ---

(St33) 1449 15HR,HS Fe310-0

1.036 Fe360B FE360B (E24-2) Fe360 B Fe360 B FU --- 1311 16 D 18kp AE235 B A570 Gr.33,36

(UST 37-2) 4360-40 B 1312 St3kp Fe360 B

1.037 Fe360 B FE360B E24-2 Fe360B Fe360B;C;D STKM 12A;C 1311 --- AE235B ---

(St 37-2) 1449 37/23 HR Fe360B

1.038 Fe360B FE360 B FN E24-2 NE Fe360 B FU Fe360 B FN --- 1312 St3ps; sp AE235 B FN,FU A570 Gr.36

(RST 37-2) FE360 B FU 1449 27/23 CR Fe360B FN,FU

4360-40 B

1.044 Fe430B FE430B FN E28-2 Fe430B FN Fe430B SM400A;B;C 1411 St4ps;sp AE275 B A570 Gr.40

(St44-2) 1449 43/25 HR, Fe430B FN 1412 Fe430 B FN

HS, 4360-43B

1.050 Fe490-2 FE490-2 FN A50-2 Fe490-2 FN Fe490 SS490 1550 St5ps;sp A490-2 A570 Gr.50

(St50-2) 4360-50 B 2172 Fe490-2 FN A572 Gr. 50

1.060 Fe590-2 FE590-2 FN A60-2 Fe590-2 FN Fe60-2 SM570 1650 St6ps;sp A590-2 A572 Gr.65

(St60-2) 4360-55E;55C Fe590 Fe590-2 FN

1.070 Fe690-2 FE690-2 FN A70-2 Fe690-2 FN Fe70-2 --- 1655 --- A690-2 ---

(St 70-2) Fe690 Fe690-2 FN

1.0116 Fe360D1 FE D1 FF E24-3 Fe360 D1 FF Fe360 C;D 1312 St3kp;ps:sp AE235 D A284 Gr. D

E24-4 1449 37/23 CR Fe360 C FN 16 D Fe360 D1 FF A573 Gr.58

4360-40 D Fe360 D FF A570 Gr.36; C"

Fe37-2 A611 Gr.C

1.0144 Fe430D1 FE430 D1 FF E28-3 Fe430 D1 FF Fe430 B SM400 A;B;C 1411 St4kp;ps;sp AE275 D A573 Gr.70

E28-4 4360-43 C Fe430 C(FN) 1412 Fe430 D1 FF A611 Gr.D

Fe430 D(FF) 1414

1.0301 C10 --- AF34 C10 040 A 10 C10 S10C --- 10 F.1511 M1010

XC10 045 M 10 1C10 D.151.A

1449 10 CS

1.0330 St2 --- TC 1449 4 CR FeP00 SPCC --- --- AP00 A366 (1012) 1008

St12 FeP01

1.0332 StW22 --- 1C 1449 4 HR; FeP11 PHD --- 15kp AP11 A621 (1008)

14 HR

1.0333 USt3 --- E 1449 2 CR;3 CR FeP02 SPCD --- --- AP02 A619 (1008)

Ust13

1.0334 UstW23 --- 2C --- FeP12 SPHE --- 10Kp AP12 A621 (1008)

1.0335 StW24 --- 3C 1449 1 HR FeP13 SPHE --- 08kp AP13 A622 (1008)

1.0338 St4 --- ES 1449 1 CR;2 CR FeP04 SPCE --- 08Ju;JuA AP04 A620 (1008)

St14

1.0345 HI D37-1 A37CP;AP 1501 Gr.141-360 SGV410 A516 Gr.65;55"

D37-2 1501 Gr.161-360; Fe360 1KW;KG SGV450 1330 --- A37 RC I A515 Gr.65;55"

1501 Gr.151-360

E37-1 1501 Gr,161-400; Fe360 2 KW;KG SGV480 RA II A414 Gr.C

1501 Gr.154-360

E37-2 1501 Gr.164-360; SPV450; A442 Gr.55

1501 Gr. 161-360 SPV480




1.0346 Ast35 --- A37FP --- --- --- --- --- A37 RB II ---

1.0347 RRSt3 --- E 1449 3 CR FeP02 --- --- 08Ju --- A619

1.0401 C15 --- AF37C12 080A15 C15 M1010

XC18 080M15 C16 S15C 1350 --- F.111 M1016

1449 17CS 1C15 M1017

1.0402 C22 C25-1 AF42C20 055M15 C20 S20C 1450 20 F.112 (M)1020

XC25 070M20 C21 S22C M1023

1C22 1449 22HS;CS C25

1.0406 C25 C25-1 1C25 070M26 C25 --- --- --- --- (M)1025

1C25

1.0425 H II D42-1 A42CP;AP 1501 Gr.161-400; Fe410 1 KW;KG,KT SPV315;SPV355 1430 16k A42RC I ---

1501 Gr.151-400

D42-2 1501 Gr.164-360; Fe410 2KW;KG SG295;SGV410 1432 20k A42RC II

1501 Gr.161-400

E42-1 1501 Gr.164-400; SGV450;SGV480

1501 Gr.154-400

1.0426 Ast41 --- A42FP 1501 Gr.224-400; --- --- --- --- A42RB II A662 Gr.A

1501 Gr.224-410

1.0436 Ast45 --- A48FP 1501 Gr.224-400 --- --- 2103 --- A47RB II A378

1501 Gr.224-430 A662 Gr.C

1503 Gr.224-460

1.0473 19Mn6 --- A52CP;AP --- --- SGV410 2101 --- A52RC I A537 Cl.1

SGV450 2102 RA II A414 Gr.6

SGV480 A612

1.0481 17Mn4 --- A48CP;AP --- Fe510-1KG,KT,KW SG365 --- 14G2 A47RC I A516 Gr.70

Fe510-2KG;KT;KW SGV410 RA II A515 Gr. 70

SGV450 A414 Gr.F;G"

SGV480

1.0501 C35 C35-1 1C35 080A32 C35 S35C 1550 35 F.113 1035

AF55C35 080A35 1C35

XC38 080M36

1449 40CS

1.0503 C45 C45-1 1C45 060A47 C45 S45C 1650 45 F.114 1045

AF65C45 080M46 1C45

1449 50HS;CS

1.0511 C40 C40-1 1C40 080M40 C40 --- --- --- F.114.A 1040

AF60C40 1C40

1.0535 C55 C55-1 1C55 070M55 C55 S55C 1655 55 --- 1055

AF70C55 1C55

1.0562 StE355 --- FeE355KG N --- FeE355KG;KW SM490A;B,C; --- 15GF AE355KG;DD A633 Gr.C

E355R/FP YA;YB A588

1.0570 Fe510D1 FE510 D1 FF E36-3 Fe510D1FF Fe510C FN SM490A,B,C, 2132 17GS AE355D ---

(St52-3) E36-4 1449 50/35 HR;HS Fe510B,C,D, YA,YB 2133 17G1S Fe510D1FF

4360-50D 2134

1.0577 Fe510D2 FE510D2 FF A52FP Fe510D2FF --- --- --- --- A52 RB II A738

(Ast52) 1501 Gr.224-460

1501 Gr.224-490

1.0601 C60 C60-1 1C60 060A62 C60 S58C --- 60(G) --- 1060

AF70C 55 1449HS; CS 1C60




1.0603 C67 --- XC65 080A67 C67 --- --- --- --- 1070

1449 70HS

1.0605 C75 --- --- 1449 80HS C75 --- --- 75 --- 1074

1075

1.0614 D75-2 --- XC75 --- --- --- --- --- --- 1074

1.0616 D85-2;C85 --- XC80 --- C85 --- --- --- --- 1086

1.0618 D95-2 --- XC0 --- --- --- --- --- --- 1095

1.0711 9S20 --- --- 220M07 CF9S22 SUM21 --- --- --- 1212

1.0715 9SMn28 --- S250 230M07 CF9SMn28 SUM22 1912 --- F.2111-11 1213

SMn28

1.0718 9SMnPb28 --- S250Pb --- CF9SMnPb28 SUM22L 1914 --- F.2112-11 12L13

SUM23L SMnPb28

SUM24L

1.0721 10S20 --- 10F1 (210M15) CF10S20 --- --- --- F.2121-10S20 1108

1109

1.0722 10SPb20 --- 10PbF2 --- CF10SPb20 --- --- --- F.2122-10SPb20 11L08

1.0723 15S20 --- --- 210A15 --- SUM32 1922 --- F.210.F ---

210M15

1.0726 35S20 --- 35MF6 212M36 --- --- 1957 --- F.210.G 1140

1.0727 45S20 --- 45MF4 --- --- --- --- --- --- 1146

1.0736 9SMn36 --- S300 --- CF9SMn36 SUM25 --- --- F.2113-12 SMn35 1215

1.0737 9SMnPb36 --- S300Pb --- CF9SMnPb36 --- 1926 --- F.2114-12 12L14

SMnPb35

1.1121 Ck10 C10-2 XC10 040A10 C10 S9CK 1265 08;010 F.1510-C10k

1010

2C10 S10C

2C15

1.1133 20Mn5 --- 20M5 120M19 G22Mn3 SMnC420 2132 20GSL F.1515-20Mn6 1022

20Mn7 1518

1.1141 Ck15 C16-2 XC12 040A15 C15 S15 1370 15 F.1110-C15k 1015

XC15 080M15 C16 S15CK F.1511-C16k

XC18

1.1151 Ck22 C25-2 2C22 055M15 C20 S20C 1450 20 F.1120-C25k 1020

XC18 C25 S20CK 1023

XC25 S22C

1.1157 40Mn4 --- 35M5 150M36 --- --- --- 40G --- 1035

40M5 1041

1.1158 Ck25 C25-2 2C25 070M26 C25 S25C --- 25 F.1120-C25k 1025

XC25 S28C

1.1165 30Mn5 28Mn6 35M5 120M36 --- SMn433H --- 27ChGSNMDTL F.8211-30Mn5 1036

(150M28) SCMn2 30GSL F.8311-AM30Mn5 1330

1.1166 34Mn5 --- --- --- --- SMn433H --- --- TO.B 1536

1.1167 36Mn5 --- 35M5 150M36 --- SMn438(H) 2120 35G2 F.1203-36Mn6 1335

40M5 SCMn3 35GL F.8212-36Mn5

1.170 28Mn6 28Mn6 20M5 150M28 C28Mn SCMn1 --- 30G --- 1330

28Mn6

1.1180 Cm35 C35-3 3C5 080A35 --- --- 1572 --- f.1135-C35k1 1035

XC32




1.1181 Ck35 C35 2C35 080A35 C35 S35 1550 35 F.1130-C35k 1035

C35-2 XC32 1572 1038

Xc38H1

1.1183 CF35 C36 XC38H1TS 080A5 C36;C38 S35C 1572 35 --- 1035

1.1186 Ck40 C40-2 2C40 060A40 C40 S40C --- 40 --- 1040

XC42H1 080A40

080M40

1.1191 Ck45 C45-2 2C45 080M46 C45 S45C 1672 45 F.1140-c45k 1045

XC45H1 060A47 C46 S48C F.1142-C48k

XC45

XC48

1.1193 CF45 C46 XC42H1TS 060A47 C43 S45C 1672 45 --- 1045

080M46 C46

1.1201 Cm45 C45-3 3C45 080M46 --- S50C 1660 --- F.1145-C45k-1 1049

XC42G1 F.1147-C48K-1

XC48H1

1.1203 Ck55 C55-2 2C55 060A57 C55 S55C 1665 55 F.1150-C55k 1055

1.1206 Ck50 --- 2C50 080M50 --- --- --- 50 --- 1049

XC48h1 1050

1.1209 Cm55 C55-3 3C55 070M55 --- --- --- --- F.1155-C55k1 1055

XC55H1

1.1213 Cf53 C53 XC48H1TS 070M55 C53 S50C 1674 50 --- 1050

1055

1.1221 Ck60 C0-2 2C60 060A2 C60 S58C 1665 60 --- 1060

XC60 1678 60G 1064

60GA

1.1231 Ck67 --- XC68 060A67 C70 --- 1770 65GA --- 1070

68GA

70

1.1248 Ck75 --- XC75 060A78 C75 --- 1774 75(A) --- 1074

1075

1078

1.1269 Ck85 --- XC90 --- C90 --- --- 85(A) --- 1086

1.1274 Ck101 --- XC100 --- C100 SUP4 1870 --- --- 1095

1.3401 X120Mn12 --- Z120M12 --- GX120Mn12 SCMnH1 2183 110G13L F.8251- A128(A)

SCMnH11 AM-X-120Mn12

1.3505 100Cr6 --- 100C6 2S135 100Cr6 SUJ2 2258 SchCh15 F.13.10-100Cr6 52100

535A99

1.5024 46Si7 45Si7 45S7 --- --- --- --- --- F.1451-46Si7 ---

1.5025 51Si7 50Si7 51S7 --- 48Si7 --- 2090 --- F.1450-50Si7 9255

50Si7

1.5026 55Si7 55Si7 55S7 251A58 55Si7 --- 2085 55S2 F.1440-56Si7 9255

2090

1.5027 60Si7 60Si7 60S7 251A60 60Si7 --- --- 60S2 F.1441-60Si7 9260

251H60

1.5028 65Si7 --- 60S7 --- --- 50P7 --- --- --- 9260H

SUP6




1.5415 15Mo3 16Mo3 15D3 --- 16Mo3(KG;KW) --- 2912 --- F.2601-16Mo3 A204 Gr.A

4017

1.5419 22Mo4 -- --- 1503-243-430 G20Mo5 SCPH11 (2512) --- --- 4419

G22Mo5

1.5423 16Mo5 16Mo5 --- --- 16Mo5 KG;KW SB450M --- --- F.2602-16Mo5 4520

SB480M

1.5622 14Ni6 18Ni6 16N6 --- 14Ni6 KG;KT --- --- --- F.2541-15Ni6 A350-LF5

1.5637 10Ni14 12Ni14 12N14 1501-503 --- SL3N26 --- --- f.152 A350-LF3

5S15 45

1.5662 X8Ni9 10Ni36 --- 1501-510 X10Ni9 SL9N53 --- --- F.2645-X8Ni09 A353

1502-502-650 X12Ni09 60

1503-509-690

1.5680 12Ni19 12Ni20 Z18N5 --- --- --- --- --- --- 2515

2517

1.5710 36NiCr6 --- 35NC6 --- --- SNC236 --- --- --- 3135

1.5711 40NiCr6 --- --- --- --- --- --- 40ChN --- (X)3140

1.5713 13NiCr6 --- 10NC6 --- --- --- --- --- --- 3115

1.5732 14NiCr10 --- 14NC11 --- 16NiCr11 SNC415(H) --- --- F.1540-15NiCr11 3415

1.5736 36NiCr10 --- 30NC11 --- --- SNC631(H) --- --- --- 3435

1.5752 14NiCr14 13NiCr12 12NC15 655H13 --- SNC815(H) --- --- --- 3310

14NC12 3415

9314

1.5755 31NiCr14 --- 18NC13 --- --- SNC836 --- --- F.123 ---

1.5919 15CrNi6 14CrNi6 16NC6 --- --- --- --- --- --- 3315

1.6511 36CrNiMo4 --- 36CrNiMo4 --- 38NiCrMo4(KB) --- --- 40ChN2MA F.1280-35 4340

35NCD5 NiCrMo4 9840

40NCD3

1.6523 21NiCrMo2 --- 20NCD2 805H20 20NiCrMo2 SNCM220(H) 2506 --- F.1522- 8620

805M20 20NiCrMo2

806M20 F.1534-

20NiCrMo3 1

1.6543 21NiCrMo2 2 --- --- 805A20 --- --- --- --- F.1524- 8720

20NiCrMo3

1.6546 40NiCrMo2 2 40NiCrMo2 40NCD2 3111-Type7 40NiCrMo2(KB) SNCM240 --- 38CHGNM F.1204- 8740

40NiCrMo2

F1205-

40NiCrMo2DF

1.6562 40CrMo 8 4 --- --- --- 40NiCrMo7(KB) SNB24-1-5 --- --- --- E4340

1.6565 40NiCrMo6 --- --- 817A37 --- SNCM439 --- 40Ch2N2MA F.1272- 4340

818M40 40NiCrMo7 9850

1.6580 30CrNiMo8 30CrNiMo8 30CrNiMo8 --- 30NiCrMo8 SNCM431 --- --- --- ---

30CND8

1.6582 34CrNiMo6 35CrNiMo6 34CrNiMo8 816M40 35NiCrMo6KB SNCM447 2541 38Ch2N2MA F.1272- 4337

35CND6 817M40 400NiCrMo7 4340

1.6587 17CrNiMo6 17CrNiMo7 18NCD6 --- (18NiCrMo7) --- --- --- F.1560- ---

14CiCrMo13




1.6657 14NiCrMo13 4 14NiCrMo13 16NCD13 832H13 15NiCrMo13 --- --- --- F.1560- 9310

832M13 14NiCrMo13

S157 F.1569-

14NiCrMo13 1

1.6746 32NiCrMo14 5 --- 35NCD14 --- --- --- --- --- F.1262- ---

32NiCrMo12

1.6747 30NiCrMo16 6 --- 35NCD16 835M30 --- --- --- --- F.1260-

32NiCrMo16

1.7003 38Cr2 38Cr2 38C2 --- 38Cr2 --- --- --- F.1200-38Cr3 ---

38Cr2 41Cr2KB

1.7006 46Cr2 46Cr2 42C2 --- 45Cr2 --- --- --- --- 5045

46Cr2 5046

W.-Nr. Germany Belgium France U.K. Italy Japan Sweden Russia Spain USA

DIN NBN AFNOR B.S. UNI JIS SS GOST UNE AISI/SAE/ASTM

1.7015 15Cr3 15Cr2 12C3 523M15 --- SCr415(H) --- 15Ch --- 5015

18C3 5115

1.7030 28Cr4 --- --- 530A30 --- --- --- 30Ch --- 5130

1.7033 34Cr4 34Cr4 32C4 530A32 334Cr4(KB) SCr430(H) --- 35Ch F.8221-35Cr4 5132

34Cr4 530H32

1.7034 37Cr4 37Cr4 37Cr4 31111-3/1 36CrMn4 SCr435H --- SchCh10 F.1210.38Cr4DF 5135

38C4 530A36 36CrMn5 40Ch F.1201-38Cr4

530H36 38Cr4KB

38CrMn4KB

1.7035 41Cr4 41Cr4 41Cr4 530A40 41Cr4 SCr440(H) --- 40Ch F.1211-41Cr4DF 5140

45C4 42C4 530H40 41Cr4KB F.1202-42-Cr4

530M40

1.7045 42Cr4 --- 42C4TS 530A40 41Cr4 SCr40 2245 40Ch F.1202-42Cr4 5140

1.7108 60SiCr7 60SiCr8 60SC7 --- 60SiCr8 --- --- --- F.1442-60SiCr8 9262

1.7131 16MnCr5 16MnCr5 16MC4 527M17 16MnCr15 --- 2173 18Ch F.1516-16MnCr5 5115

590H17 F.1517-16MnCr5

590M17

1.7147 20MnCr5 --- 20MC5 --- 20MnCr5 SMnC420H --- 18ChG F.150.D 5120

1.7176 55Cr3 55Cr3 55C3 525A58 55Cr3 SUP9(A) 2253 50ChGA F.1431-55Cr3 5155

525A 5160

525H60

1.7218 25CrMo4 25CrMo4 25CD4 708A25 25CrMo4(KB) SCM420 2225 20ChM F.8372- 4130

25CrMo4 SCM430 26CrMo4

SCCrM1 F.8830-

AM25CrMo4

F.1256-

30CrMo4-1

1.7220 34CrMo4 34CrMo4 34CrMo4 708A37 34CrMo4KB SCM432 2234 AS38ChGM F.8331- 4135

35CD4 35CrMo4 SCCrM3 35ChM AM34CrMo4 4137

35CrMo4F SCM435H 35ChML F.8231-

34CrMo4

F.1250-

35CrMo4

F.1254-

35CrMo4DF




1.7223 41CrMo4 41CrMo4 42CD4TS 708M40 41CrMo4 SCM440 2244 40ChFA F.8332- 4140

3111-5/1 AM42CrMo4 4142

F.8332-

42CrMo4

F.1252-

40CrMo4

1.7225 42CrMo4 42CrMo4 42CD4 708A42 38CrMo4KB SCM440(H) 2244 --- F.8332- 4140

42CrMo4 708M40 42CrMo4 SNB7 AM42CrMo4 4142

709M40 G40CrMo4 F.8332-

42CrMo4

F.1252-

40CrMo4

1.7228 50CrMo4 --- 50CrMo4 708A47 --- SCM445(H) --- --- --- 4150

1.7242 16CrMo4 18CrMo4 --- --- 18CrMo4 SCM418H --- --- F.1550-18CrMo4 ---

1.7262 15CrMo5 --- 12Cd4 --- --- SCM415(H) --- --- F.1551-12CrMo4 ---

1.7264 20CrMo5 -- 18CD4 --- --- SCM420H --- --- F.1551- ---

SCM421 18CrMo4-1

1.7335 13CrMo4 4 14CrMo45 15CD3.5 620-440 14CrMo3 SFVA F12 2216 12ChM F.2631- A182-F11;12"

15CD4.5 620-470 16CrMo3 15ChM 14CrMo4 5 A387 Gr.12Cl.2

620-540

1501-620;621

1.7337 16CrMo 4 4 --- 15CD4.5 --- 18CrMo 4 5 KW;KG --- 2216 15ChM --- A387 Gr.12Cl.2

1.7361 32CrMo12 32CrMo12 30CD12 722M24 32CrMo12 --- 2240 --- F.124.A ---

1.7380 10CrMo 9 10 12CD9.10 1501-622/615 12CrMO9 10;KW;KG SFVA F22A;B 2218 12Ch8 TU.H A182 F22

10CD9.10 1501-622/690 G14CrMo9 10 SCMV4 A387 Gr.22Cl.2

1502-622

3604-622

1.7715 14MoV6 3 13MoCrV6 --- 1503-660-460 --- --- --- --- F.2621 ---

13CrMoV6

1.8159 50CrV4 50CrV4 50CV4 735A51 50CrV4 SUP10 2230 50ChGFA F.1430-51CrV4 6145

51CrV4 735H51 50ChFA 6150

1.8507 34CrAlMo5 34CrAlMO5 30CAD6.21 --- 34CrAlMo7 --- --- --- F.1741- A355 Cl.D

34CrAlMO5

1.8509 41CrAlMo7 41CrAlMo7 40CAD6.12 905M39 41CrAlMo7 SACM645 2940 38ChMJuA F1740- A355 Cl.A

41CrAlMo7 E71400

G71406

1.8515 31CrMo12 31CrMo12 30CD12 722M24 30CrMo12 --- 2240 --- F.1712- ---

31CrMo12 31CrMo12

1.8523 39CrMoV13 9 39CrMoV13 897M39 --- --- --- --- --- --- ---

3S.132

1.8902 StE420 --- FeE420KG N --- FeE420KG,KW SM490A;B,C, 2143 16G2AF AE420KG A633 Gr.E

E420RIFP YA;YB




1.8905 StE460 --- FeE460KG N 4360-55F FeE460KG;KW SM520B 2143 18G2Afps AE460KG A633 Gr.E

E460 RIFP

1.4000 X6Cr13 Z8C12 403S17 X6Cr13 SUS403 2301 08Ch13 F.3110-

403

1.4001 X7Cr14 Z8C13FF SUS410S X6Cr13

410S

SUS429 F.8401- 429

AM-X12Cr13

1.4002 X6CrAl13 Z8CA12 405S17 X6CrAl13 SUS405 --- --- F.3111- 405

X6CrAl13

1.4005 X12CrS13 Z11CF13 416S21 S12CrS13 SUS416 2380 --- F3411- 416

X12CrS13

1.4006 (G-)X10Cr13 Z10C13 410S21 X12Cr13 SUS410 2302 12Ch13 F.3401- 410

410C21 X10Cr13 15Ch13L X10Cr13 CA-15

ANC 1A

1.4008 G-X8CrNi13 Z12CN13M 410C21 GX12Cr13 SCS1 --- --- --- ---

1.4016 X6Cr17 Z8C17 430S17 X8Cr17 SUS430 2320 12Ch17 F.3113- 430

430S18 X6Cr17

1.4021 X20Cr13 Z20C13 420S37 X20Cr13 SUS420J1 2303 20Ch13 F.3402- 420

X20Cr13

1.4024 X15Cr13 Z13C113 420S29 --- SUS410J1 --- --- F.3415- ---

X15Cr13

1.4027 G-X20Cr14 Z20C13M ANC 1 B;C --- SCS2 --- 20Ch13L --- ---

420C24

420C29

1.4028 X30Cr13 Z30C13 420S45 X30Cr13 SUS420J2 2304 30Ch13 F.3403- 420F

Z33C13 X30Cr13

1.4031 X38Cr13 Z40C14 --- X40Cr14 SUS420J2 2304 40Ch13 F.3404- --

X40Cr13

1.4034 X46Cr13 Z40C14 (420S45) X40Cr14 --- --- 40Ch13 F.3405- --

Z44C14 X45Cr13

Z38C13M

1.4057 X20CrNi 17 2 Z15CN16-02 431S29 X16CrNi16 SUS431 2321 20Ch17N2 F.3427- 431

X19CrNi 17 2

1.4104 X12CrMoS17 Z13CF17 --- X10CrS17 SUS430F 2383 --- F.3117- 430F

X10CrS17

F.3413-

X14CrMoS17

1.4113 X6CrMo17 1 --- 434S17 X8CrMo17 SUS434 --- --- F.3116- 434

X6CrMo17 1

1.4125 X105CrMo17 Z100CD17 --- --- SUS440C --- (95Ch18) --- 440C

1.4301 X5CrNi18 10 Z4CN19-10FF 304S15 X5CrNi18 10 SUS304 2332 08Ch18N10 F.3504- 304

Z5CN17-08 304S16 2333 X5CrNi18 10 304H

Z6CN18-09 304S17

Z7CN18-09 304S18

304S25

305S31

1.4303 X5CrNi18 12 Z8CN18-12 305S17 X7CrNi18 10 SUS305J1 --- 06Ch18N1 F.3513- 305

Z5CN18-11FF 305S19 X8CrNi19 10 SUS305 X8CrNi18-12 308




1.4305 X10CrNiS18 9 Z8CNF18-09 303S21 X10CrNiS15 09 SUS303 2346 --- F.3508- 303

303S22 X10CrNiS18-09

1.4306 X2CrNi1911 Z1CN18-12; 304S11 X3CrNi18 11 SCS19 2333 03Ch18N11 F.3503- 304L

G-X2CrNiN18 9 Z1CN18-09 304S12 X2CrNi18 11 SUS304L 2352 X2CrNi18 10

Z2CN18-10; 304S14 GX2CrNi19 10

Z3CN19-10M 304S22

Z3CN18-10; 304C12(LT196)

Z3CN19-11 305S11

Z3CN19-11FF

1.4308 G-X6CrNi18-9 Z6CN18-10M 304C15(LT196) --- SCS13 2333 07Ch18N9L --- CF-8

1.4310 X12CrNi17 7 Z11CN17-08 301S21 X12CrNi17 07 SUS301 2331 --- F3517- 301

Z12CN18-08 301S22 X12CrNi 17 7

Z12CN18-09

1.4311 X2CrNiN18 10 Z3CN18-07Az 304S61 X2CrNiN18 11 SUS304LN 2371 --- F.3571- 304LN

Z3CN18-10Az X2CrNiN18 10

1.4312 G-X10CrNi18 8 Z10CN18.9M 302C25 --- SCS12 --- 10Ch18N9L --- ---

ANC3A

1.4313 X4CrNi13 4 Z4CrNi13 4 425C11 GX6CrNi13 04 SCS5 2385 --- --- CA6-NM

GX5CrNi13 4 Z8CD17-01 425C12 SCS6

1.4319 X5CrNi18 7 Z10CN18.09 302S26 X10CrNi1809 SUS302 2331 12Ch18N9 F.3507- 302

X10CrNi18-09

1.4401 X5CrNiMo Z3CND17-11-01 316S13;316S17 X5CrNiM017 12 SUS316 2347 --- F.3534- 316

17 12 2 Z6CND17-11 316S18;316S19 X5CrNiMo17 12 2

Z6CND17-11-02

FF

Z7CND17-11 02

Z7CND17-12-02

1.4404 X2CrNiMo Z2CND17-12 316S11;316S13 X2CrNiMo17 12 SUS316L 2348 --- F.3533- 316L

17 13 2 Z2CND18-13 316S14;316S22 X2CrNiMo17 13 2

G-X2CrNiMoN Z3CND17-11-02 316S24;316S29 F3537-

18 10 Z3CND17-12-02 316S31;316S42 X2CrNiMo17 13 3

FF S.537

Z3CND18-12-02 T.75

Z3CND19.10M

1.4406 X2CrNiMoN Z3CND17-11Az 316S61 X2CrNiMoN17 12 SUS316LN --- --- F.3542- 316LN

17 12 2 316S63 X2CrNiMoN17 12 2

1.4408 G-XcrNiMo --- 316C16(LT196) --- SCS14 2343 07Ch18N10- F.8414- CF-8M

18 10 ANC4B G2S2M2L AM-7CrNiMo20 10

1.4429 X2CrNiMoN Z3CND17-12Az 316S63 X2CrNiMoN17 13 (SUS316LN) 2375 --- F.3543- 316LN

17 13 3 X2CrNiMoN17 13 3

1.4435 X2CrNiMo Z3CND17-12-03 316S11 X2CrNiMo17 13 SCS16 2353 03Ch17N14M3 F.3533- 316L

18 14 3 z3CND18-14-08 316S13 SUS316L 03Ch16N15M3 X2CrNiMo17 13 2

316S31

LW22

LWCF22

1.4436 X5CrNiMo Z6CND18-12-03 316S31 X5CrNiMo17 13 SUS316 2343 --- F.3543- 316

17 13 3 Z7CND18-12-03 316S33 X8CrNiMo17 13 X5CrNiMo 17 12 2

F.35.35-

X5CrNiMo17 13 3




1.4438 X2CrNiMo Z2CND19-15-04 317S12 X2CrNiMo18 16 SUS317L 2367 --- F.3539- 317L

18 16 4 Z3CND19-15-04 X2CrNiMo18 116 4

1.4449 X5CrNiMo17 13 --- 317S19 (X5CrNiMo18 15) SUS317 --- --- --- 317

1.4460 X4CrNiMoN (Z3CND25-07Az) --- --- SUS329J1 2324 --- F.3309- 329

27 5 2 Z5CND27-05Az --- --- SCH11;SCS11 X8CrNiMo27-05

F.3552-

X8CrNiMo26 6

1.4510 X6CrTi17 Z4CT17 --- X6CrTi17 SUS430LX --- 08Ch17T F.3115-X5CrTi17 XM8

Z8CT17 430Ti

439

1.4511 X6CrNb17 Z4CNb17 --- X6CrNb17 SUS430LX --- --- F.3122-X5CrNb17 ---

1.4512 X6CrTi12 Z3CT12 LW19 X6CrTi12 SUH409 --- --- --- 409

Z6CT12 409S19

1.4521 X2CrMoTi18 2 --- --- --- SUS444 2326 --- F.3123- 443

X2CrMoTiNb18 2 444

1.4539 X1NiCrMoCuN Z1NCDU25-20 --- --- --- 2562 --- --- UMNS N08904

25 20 5

1.4541 X6CrNiTi18 10 Z6CNT18-10 321S18 X6CrNiTi18 11 SUS321 2337 06Ch18N10T F.3523- 321

321S22 08Ch18N10T X6CrNiTi18 10

321S31 09Ch18N10T

321S51 12Ch18N10T

(490;510)

321S59

LWCF24

1.4542 X5CrNiCuNb Z7CNU15-05 --- --- SCS24 --- --- --- 630

17 14 Z7CNU17-04 SUS630

1.4546 X5CrNiNb18 10 --- 347S17 X6CrNiNb18 11 --- --- --- --- 348

347S18

2S.130

2S.143/144

2S.525/527

1.4550 X6CrNiNb18 10 Z6CNNb18-10 347S17 X6CrNiNb18 11 SUS347 2338 08Ch18N12B F.3524- 347

347S20 X8CrNiNb18 11 X6CrNiNb18 10 347

347S31

347S51

ANC3B

1.4552 G-X5CrNiNb Z6CNNB18.10M 347C17 --- SCS21 --- --- --- ---

18 9

1.4571 X6CrNiMoTi Z6CNDT17-12 320S18 X6CrNiMoTi17 12 --- 2350 10Ch17N13M2T F.3535- 316Ti

17 12 2 320S31 X6CrNiMoTi17 12 2

1.4573 X10CrNiMoTi --- 320S33 X6CrNiMoTi17 13 --- --- 10Ch17N13M3T F.3535- 316Ti

18 12 08Ch17N13M2T X6CrNiMoTi17 12 2

1.4580 X6CrNiMoNb Z6CNDNb17-12 318S17 X6CrNiMoNb17 12 --- --- 08Ch16N13M2B F.3536- (316Cb)

X6CrNiMoNb17 12 2

1.4581 G-X5CrNiMoNb Z4CNDNb18.12M 318C17 GX6CrNiMoNb20 11 SCS22 --- --- --- ---

18 10 ANC4C

1.4583 X10CrNiMoNb --- --- X6CrNiMoNb17 13 --- --- 09Ch16N15M3B --- 318

1812

1.4718 X45CrSi9 3 Z45CS9 401S45 X45CrSi8 SUH1 --- 40Ch9S2 F.3220- HNV3

X4ScrSi09-03




1.4724 X10CrAl13 Z10C13 --- X10CrAl12 --- --- 10Ch13Sju F.3152- ---

X10CrAl13

1.4731 X40CrSiMo10 2 Z40CSD10 --- --- SUH3 --- 40Ch10S2M F.3221- ---

X40CrSiMo10-02

1.4742 X10CrAl18 Z10CAS18 --- (X8Cr17) SUH21 --- 15Ch18SJU F.3153- ---

X10CrAl18

1.4747 X80CrNiSi20 Z80CSN20-02 443S65 X80CrSiNi20 SUH4 --- --- F.3222- HNV6

X80CrSiNi20-02

1.4762 X10CrAl24 Z10CAS24 --- (X16Cr26) (SUH446) (2322) (15Ch28) F.3154- (446)

X10CrAl24

1.4828 X15CrNiSi20 12 Z15CNS20-12 309S24 X16CrNi23 14 SUH309 --- 20Ch20N14S2 D.3312- 309

Z17CNS20-12 X15CrNiSi20-12

1.4833 X7CrNi23 14 Z15NC24-13 309S24 X6CrNi23 14 SUS309S --- --- --- 309S

Z20CN24-13

1.4837 G-X40CrNiSi --- 309C30 GX35CrNi25 12 SCH13A --- 40Ch24N12SL --- ---

25 12 SCH17

SCS17

1.4841 X15CrNiSi25 20 Z12CNS25-20 314S25 X16CrNiSi25 20 SUH310 --- 20Ch25N20S2 F.3310- 314

Z15CNS25-20 X15CrNiSi25-20 310

1.4842 X12CrNi25 20 Z12CN26-21 310S24 (X6CrNi25 20) SUS310S 2361 10Ch23N18 --- 310S

310S94

1.4845 X12CrNi25 21 Z8CN25-20 310S16 X6CrNi25 21 SUH310 2361 20Ch23N18 --- 310S

Z12CN25-20 310S24 (X6CrNi25 20) SUS310S

1.4848 G-X40CrNiSi --- 310C40 GX40CrNi26 20 SCH21 --- --- F.8452- HK

25 20 310C45 SCH22 AM-X40CrNi25 20

1.4864 X12NiCrSi36 16 Z12NCS37-18 NA17 --- SUH330 --- --- F.3313- 330

Z12NCS35-16 X12CrNiSi36-16

Z12NC37-18

1.4865 G-X40NiCrSi --- 330C11 GX50NiCr39 19 SCH15 --- --- --- ---

38 18 330C40 SCH16

331C40

1.4871 X53CrMnNiN Z52CMN21-09 349S54 X53CrMnNiN21 9 SUH35 --- 55Ch20G9AN4 F.3217- EV8

21 9 SUH36 5Ch20N4AG9 X53CrMnNiN21-09

1.4873 X45CrNiW18 9 Z35CNWS14-14 --- X45CrNiW18 9 SUH31 --- --- F.3211- ---

X45CrNiSiW18-09

1.4876 X10NiCrAlTi Z8NC32-21 NA15(H) --- NCF800(TP) --- --- F.3545- B163

32 20 Z10NC32-21 X9NiCr33-21

F.3314-

X10NiCrAlTi32-20

1.4878 X12CrNiTi18 9 Z6CNT18-12(B) 321S51 (X6CrNiTi18.11) SUS321 2337 12Ch18N10T --- 321

1.4922 X20CrMoV12 1 Z20CDV12 --- X20CrMoNi12 01 --- 2317 --- --- ---


Duplex and Special AlloysComparison of Standards

TYPE: ALLOY 800; W-St. 1.4876

Grade No. Chemical Composition, % OtherC Si Mn P S Cr Ni Mo Ti Elem.*

DIN W-Nr. 4876 0,04-0,10 1,00 1,50 0,030 0,020 19,0-23,0 30,0-34,0 0,75 0,15-0,60 Al0,15-0,6(X10NiCrAlTi 3220)cx Co 1,0

UNS N 08800 0,10 1,00 1,50 0,015 19,0-23,0 30,0-35,0 0,75 0,15-0,60 Al0,15-0,6ASTM B163 Fe 39,5

BS Na 15 0,10 1,00 1,50 0,015 19,0-23,0 30,0-35,0* 0,75 0,15-0,60 Al0,15-0,6Fe

SISAFNOR Z8NC 3221 0,10 1,00 1,50 0,040 0,030 19,0-23,0 31,0-34,0 0,15-0,60 Al0,15-0,6JIS NCF-800 TP S326 0,10 1,00 1,50 0,030 0,015 19,0-23,0 30,0-35,0 0,75 0,15-0,60 Al0,15-0,6

FeUNIGOST

TYPE: ALLOY 825; W-St. 2.4858


Cu1,5-3,0DIN W-Nr.2.4858 0,025 0,50 1,00 0,025 0,015 19,5-23,5 38,0-46,0 2,5-3,5 0,6-1,2 Al 0,2

(NiCr21) Co1,0; Fe Cu1,5-3,0

UNS N 08825 0,03 1,00 2,50 0,030 0,030 26,0-28,0 29,5-32,5 3,0-4,0 0,6-1,2 Al 0,2ASTM B163 Fe 22,0

0,6-1,2 Cu1,5-3,0BS Na 16 0,05 0,50 1,00 0,030 19,5-23,5 38,0-46,0* 2,5-3,5 >20xC Al<0,20;FeSIS AFNOR

Cu1,5-3,0JIS NCF-825 TP/NEF285TB 0,05 0,50 1,00 0,030 0,015 19,5-23,5 38,0-46,0 2,5-3,5 0,6-1,2 Al 0,2; Fe



TYPE: AUSTENITIC 17 Cr 13 Ni 5 Mo; technicromo 17 13 5; W-St. 1.4439


DIN W-Nr. 4439 0,04 1,00 2,00 0,030 0,020 16,5-18,5 12,5-14,5 4,0-5,0 N0,12-0,22(X2CrNiMoN17 13 5)

DIN W-Nr. 4439 0,04 1,00 1,50 0,045 0,030 16,5-18,5 12,5-14,5 4,0-4,5 N0,10-0,20(G-X2CrNiMoN17 13 5)

BSSISAFNORJISUNIGOSTVD TÜV Blatt TECRONIMO 17 13 5 0,03 1,00 2,00 0,030 0,020 16,5-18,5 12,5-14,5 4,0-5,0 N0,12-0,22

TYPE: AUSTENITIC 27 Cr 31 Ni 4 Mo; tecronimo 28 31 4; W-St. 1.4563


DIN W-Nr. 4563 0,02 1,00 2,00 0,020 0,015 26,0-28,0 30,0-32,0 3,0-4,0 Cu0,8-1,5(X1NiCrMoCu 31 27 4)

UNS N 08028 0,03 1,00 2,50 0,030 0,030 26,0-28,0 29,5-32,5 3,,0-4,0 Cu0,6-1,4ASTM B668

BSSIS 0,025 1,00 2,00 0,040 0,030 19,0-21,0 24,0-26,0 4,0-5,0 Cu1,2-2,0AFNOR 0,02 1,00 2,00 0,035 0,025 19,0-22,0 24,0-27,0 4,0-5,0 Cu1,0-2,0JISUNIGOSTVD TÜVBlattTECRONIMO 28 31 4 0,020 1,00 2,00 0,020 0,015 26,0-28,0 30,0-32,0 3,0-4,0 Cu0,8-1,4

TYPE: Alloy 400; W-St. 2.4360


Cu28-34DIN W-Nr. 2.4360 0,16 0,50 2,00 0,020 63,0 Fe1,0-2,5

(NiCu30Fe) Al0,50UNS N 04400 0,30 0,50 2,00 0,024 63,0* Cu28-34

ASTM B163-165 Fe2,5BS Na 13 0,30 0,50 2,00 0,024 63,0* Cu28-34

Fe<2,5SISAFNOR JISUNIGOST * incl. Co

TYPE: Alloy 600; W-St. 2.4816


DIN W-Nr. 2.4816 0,08 0,50 1,00 0,015 0,015 14,0-17,0 72,0 Cu0,50(NiCr 15 Fe) Fe6,0-10,0

UNS N 06600 0,15 0,50 1,00 0,015 14,0-17,0 72,0* Cu0,50ASTM B163-167 Fe6,0-10,0

BS Na 14 0,15 0,50 1,00 0,015 14,0-17,0 72,0* Cu0,50Fe6,0-10,0

SIS AFNOR JIS UNIGOST

* incl. Co



TYPE: DUPLEX 22 Cr 5 Ni 3 Mo; Duplinos® 2205; W-St. 1.4462


DIN W-Nr. 4462 0,03 1,00 2,00 0,030 0,020 21,0-23,0 4,5-6,5 2,5-3,5 N0,08-0,20(X2CrNiMoN225)

UNS S 31803 0,03 1,00 2,00 0,030 0,020 21,0-23,0 4,5-6,5 2,5-3,5 N0,08-0,20ASTM A789/790

BSSISAFNORJISUNIGOSTVD TÜV Blatt 418 0,03 1,00 2,00 0,030 0,020 21,0-23,0 4,5-6,5 2,5-3,5 N0,08-0,20DUPLINOS 2205 0,03 1,00 2,00 0,030 0,020 21,0-23,0 4,5-6,5 2,5-3,5 N0,08-0,20

TYPE: AUSTENITIC 20 Cr 25 Ni 5 Mo; technicromo 904L; W-St. 1.4539


DIN W-Nr. 4539 0,02 0,65 2,00 0,035 0,020 19,0-21,0 24,0-26,0 4,0-5,0 Cu1,0-2,0(X2NiCrMoCu25 20 5) N0,04-0,10

UNS N 08904 0,02 1,00 2,00 0,045 0,035 19,0-23,0 23,0-28,0 4,0-5,0 Cu1,0-2,0Alloy 904L ASTM B677

BSSIS 2562 0,025 1,00 2,00 0,040 0,030 19,0-21,0 24,0-26,0 4,0-5,0 Cu1,2-2,0AFNOR Z1NCDU 2520 0,02 1,00 2,00 0,035 0,025 19,0-22,0 24,0-27,0 4,0-5,0 Cu1,0-2,0JISUNIGOSTVD TÜVBlattTECHNICROMO 904L 0,02 0,65 2,00 0,035 0,020 19,0-21,0 24,0-26,0 4,0-5,0 Cu1,2-2,0

TYPE: DUPLEX 19 Cr 5 Ni 3 Mo; duplinos® 1905; W-St. 1.4417


DIN W-Nr. 4417 0,03 1,2-1,9 1,2-1,8 0,040 0,030 18,0-19,0 4,3-5,2 2,5-3,0 N0,06-0,09(X2CrNiMo 195)

UNS S 31500 0,03 1,4-2,0 1,2-2,0 0,030 0,030 18,0-19,0 4,25-5,25 2,5-3,0 N0,05-0,10ASTM B669/789/790

BSSIS AFNOR JISUNIGOSTVD TÜVBlatt DUPLINOS® 1905 0,03 1,4-1,9 1,2-1,8 0,030 0,030 18,0-19,0 4,3-5,2 2,5-3,0 N0,06-0,09

TYPE: DUPLEX 25 Cr 6 Ni Mo; duplinos® 2506; W-St. 1.4460


DIN W-Nr. 4460 0,10 1,00 2,00 0,045 0,030 26,0-28,0 4,0-5,0 1,3-2,0(X4CrNiMoN 27 5 2)

AISI Type 329 0,20 0,75 1,00 0,040 0,030 23,0-28,0 2,5-5,0 1,0-2,0BSSIS 2324 0,10 1,00 2,00 0,045 0,030 24,0-27,0 4,5-7,0 1,3-1,8AFNOR JIS SUS 329 J1 0,08 1,00 1,50 0,040 0,030 23,0-28,0 3,0-6,0 1,0-3,0UNIGOSTJIS SCH 11 0,40 2,00 1,00 0,040 0,040 24,0-28,0 4,0-6,0 0,50JIS SCA 11 0,10 1,50 1,00 0,040 0,040 23,0-27,0 5,0-7,0 1,5-2,5DUPLINOS® 2506 0,08 0,75 1,00 0,040 0,030 26,0-28,0 4,0-5,0 1,3-2,0


Comparison of Chemical Compositions in % approximate

ALLO

YD

ENSI

TIES

(kg/

dm 3 )

Nic

kel 2

00

8,

89 k

g/dm

3

Nic

kel 2

018,

89 k

g/dm

3

Tech

allo

y 40

08,

83 k

g/dm

3

Tech

allo

y K

500

8,46

kg/

dm3

Tech

allo

y 60

08,

42 k

g/dm

3

Tech

allo

y 60

18,

06 k

g/dm

3

Tech

allo

y 62

58,

44 k

g/dm

3

Tech

allo

y 80

07,

95 k

g/dm

3

Tech

allo

y 80

0H7,

95 k

g/dm

3

Tech

allo

y 82

58,

14 k

g/dm

3

Tech

allo

y D

S7,

92 k

g/dm

3

Tech

allo

y B-

29,

22 k

g/dm

3

Tech

allo

y C

-276

8,88

kg/

dm3

Tech

allo

y C

-48,

64 k

g/dm

3

Tech

allo

y G

38,

30 k

g/dm

3

Tech

allo

y 20

8,06

kg/

dm3

TPS-

Nam

esN

iC

oC

rM

oW

FeSi

Mn

CC

uA

lTi

SP

VTP

S-N

ames

Nic

kel 2

0099

,0**

0,4*

0,35

*0,

35*

0,01

0*0,

25*

0,01

* N

icke

l 200

Nic

kel 2

0199

,0**

0,40

*0,

35*

0,35

*0,

020*

0,25

*0,

01 *

Nic

kel 2

01

Tech

allo

y 40

063

,0**

2 ,5

*0,

5*2,

0*0,

30*

28-3

40,

024*

Tech

allo

y 40

0

Tech

allo

y K

500

63,0

**2,

0*0,

51,

5*0,

25*

27-3

32,

3-3,

20,

35-0

,85

0,01

*Te

chal

loy

K 50

0

Tech

allo

y 60

072

,0**

14-1

76-

100,

5*1,

0*

0,15

*0,

5*0,

015*

Tech

allo

y 60

0

Tech

allo

y 60

158

-63

21 -2

5R

est

0,50

*1

,0*

0,10

*1

,0*

1,0-

1,7

0,01

5*Te

chal

loy

601

Tech

allo

y 62

5°58

,0**

1 ,0

*20

-23

8-10

5,0*

0,5*

0,5*

0,10

*0,

4*0,

4*0,

015*

0,01

5*Te

chal

loy

625°

Tech

allo

y 80

030

-35

19-2

3,5

Res

t1,

01,

5*

0,10

*0,

75*

o, l

5-0,

60,

15-0

,60,

015*

Tech

allo

y 80

0

Tech

allo

y 80

0 H

30-3

519

-23,

5R

est

1,0

1,5*

0,05

-0,1

00,

75*

o,15

-0,6

0,15

-0,6

0,01

5*Te

chal

loy

800

H

Tech

allo

y 82

538

-46

19-2

3,5

2,5-

3,5

Res

t0,

5*1

,0*

0,05

*1,

5-3

0,2*

0,6-

1 ,2

0,03

*Te

chal

loy

825

Tech

allo

y B-

2R

est

1 ,0

*1,

0*26

-30

2 0*

0,10

*1

,0*

0,02

*0,

03*

0,04

*Te

chal

loy

B-2

Tech

allo

y C

-276

Res

t2,

5*14

-16,

515

-17

3-4,

54-

70,

08*

1 ,0

*0,

01*

0,03

*0,

04*

0,35

*Te

chal

loy

C-2

76

Tech

allo

y C

-4R

est

2,0*

14-1

814

-17

3,0*

0,08

*1

,0*

0,01

50,

7*0,

03*

0,04

*Te

chal

loy

C 4

Tech

allo

y G

3°°

Res

t5,

0*21

-23,

56-

81,

5*18

-21

1 ,0

*1,

0*0,

015

1,5-

2,5

0,03

*Te

chal

loy

G3

Tech

allo

y D

S34

,5-4

117

-19

Res

t1,

9-2,

60,

8-1,

5O 1

*0,

50,

2*0,

03*

Tech

allo

y D

S

Tech

allo

y 20

***

32-3

819

-21

2-3

Res

t1

,0*

2,0*

0,07

*3-

40,

035*

0,04

5*Te

chal

loy

20


Nickel 200UNS No. N02200, DIN W.Nr. 2.4066

Nickel 200 is technically pure nickel with good mechanical properties and excellent resistance to alkali hydroxides, dry halogen hydrides as well as organic compositi-ons. Even when exposed to high temperatures, Nickel 200 retains its strength and is ductile at low temperatures. Nickel 200 is a multipurpose grade and is used in ap-plications where alloys are not essential. It also has good magnetic and magnet ostrictive properties, high thermal and electrical conductivity as well as low gas con-tent in the elctronics industry. Furthermore Nickel 200 is of interest for its good weldability.

Chemical Composition in %

C Si Mn Fe Ni S Cu

0,15 0,35 0,35 0,4 99,0 0,010 0,25max. max. max. max. min. max. max.

Mechanical Properties - at room temperature - annealed condition

0,2 % yield strength tensile strength elongation (A5)

N/mm3 N/mm 3 %105 380 35min. min. min.

Specification

Pipes/Tubes: ASTM-B-161

welded Pipes/Tubes: ASTM-B-725/730

Plates/Sheets: ASTM-B-1672

Bars: ASTM-B-160

Specific weight: 8,89 kg/dm3

Melting range: 1435 - 1445° C

Welding methods: Arc welding, TIG, MIG, autogenous weldingwithout thermal retreatment (details on request)

Machineability: Table on request

Corrosion Resistance: Refer to table Corrosion Data on page 23,24and 25

Product forms: Tubes and pipes, fittings,, flanges, plates andsheets, bars, forgings (cast iron), profiles, wire

Range of application: chemical and food industry, loading plants,electrical and electronical parts, partsand equipment for aircrafts and rockets,transducers etc.


Nickel 201UNS No. N02201, DIN W.Nr. 2.4068

Nickel 201 is an alloy similar to Nickel 200. The carbon content of the former is a little above that of Nickel 200. Due to this difference, Nickel 201 is preferred in causticsoda above 300° C. Nickel 201 disposes of the same high thermal and electrical conductivity and of the same magnetic and megnetostrictive properties as the gradeNickel 200.


C Si Mn Fe Ni S Cu

0,020 0,35 0,35 0,40 99,0 0,01 0,25max. max. max. max. min. max. max.



N/mm3 N/mm3 %80 380 35

Speciftication


welded Pipes/Tubes: ASTM-B-725/730


Bars: ASTM-B-160



Welding methods: Arc welding, TIG, MIG, autogenous weldingwithout thermal retreatment (details on request.)


Corrosion resistance: Refer to table Corrosion Data on page 23, 24and 25

Product forms: Tubes and pipes, fittings, flanges, plates andsheets, bars, forgings (cast iron), profiles, wire

Range of application: Caustic evaporators, plating rods, combustionboats, chemical plants with operatingtemperatures above 300° C, for examplein caustic soda manufacturing plants.


Techalloy 400UNS No. N04400, DIN W.Nr. 2.4360

TECHALLOY 400 is a weldable nickel-copper alloy with good resistance to sea water, alkaline acids, organic acids, pharmaceutical products, ammonium sulfate, fattyacid etc. Tensile strength and ductility are retained in operating temperatures of max. 450° C.


C Si Mn Fe Ni S Cu

0,30 0,5 2,0 2,5 63,0 0,024 28,0 - 34,0max. max. max. max. max. max.



N/mm2 N/mm2 %195 480 35min. min. min.

Specification:


Plates: ASTM-B-127

Bars: ASTM-B-164



Welding methods: Arc welding, TIG, MIG, UP, autogenous welding,without thermal retreatment (details on request)


Corrosion: Refer to table "Corrosion Data" on page 23, 24 and25

Product forms: Tubes and pipes, fittings, flanges, plates and sheets,bars, forgings (cast iron), profiles, wire

Range of application: Techalloy 400 is mainly employed for valves andpumps, pump and propeller shafts, metal fittingsand machine parts for ships, electronic andelectric parts, tanks for petrol and drinking water,distilling apparatus for crude petroleum, electricwater heater, plants for the chemical industry


Techalloy K 500UNS No. N05500, DIN W.Nr. 2.4375

TECHALLOY K 500 is an age-hardening alloy which combines the high corrosion resistance of Techalloy 400 with increased tensile strength and hardness. With lowpermeability, Techalloy K 500 is not magnetic up to - 135° C.


C Si Mn Fe Ni S Cu Al Ti

0,25 0,5 1,5 2,0 63,0 0,010 27,0- 2,3- 0,35-0,85max. max. max. min. max. 33,0 3,2

Mechanical Properties - cold worked - cold drawn condition

0,2% yield strength tensile strength elongation (A5)

N/mm N/mm2 %620 900 15min. min. min.

Specification:

Pipes/Tubes: BS 3074 NA 18

Bars: BS 3074 Na 18

Specific weight: 8,46 kg/dm 3

Melting rage: 1315 - 1350° C

Welding methods: Arc welding, TIG, MIG, autogenous welding, thermalretreatment required (details on request)


Corrosion resistance: Refer to table "Corrosion Data" on page 23, 24 and25

Product forms: bars and forgings

Range of application: Techalloy K 500 is mainly used for propeller shafts,Cardan and pump shafts, petrol drilling, bolts,doctor blades, scraping knifes, valve spindles,electronical parts, medical instruments and springs.


Techalloy K 600UNS No. N06600, DIN W.Nr. 2.4816

Techalloy 600 has excellent mechanical properties and oxidation resistance at high temperatures. It is a standard engineering material and mainly employed in appli-cations, which require the combination of resistance to corrosion and heat.


C Si Mn Fe Cr Ni S Cu

0,15 0,5 1,0 6,0- 14,0- 72,0 0,015 0,5max. max. max. 10,0 17,0 min. max. max.

Mechanical Properties - at room temperature - annealed, cold drawn condition



Specification:Pipes/Tubes: ASTM-B-167

Welded Pipes/Tubes: ASTM-B-516/517


Bars: ASTM-B-166


Melting rage: 1355 - 1415° C

Welding methods: Arc welding, TIG, MIG, UP and autogenouswelding (details on request)


Corrosion resistance: Refer to table "Corrosion Data" on page 25,26 and 27

Product forms: Tubes and pipes, fittings, flanges, plates andsheets, bars, forgings (cast iron), wire

Range of application: Techalloy 600 is employed for muffles, heatexchanger tubes, evaporator tubes,combustion-chamber liners, nuclear reactors,plants for the food and chemicalindustry etc.



Techalloy 601 has very good properties at high temperatures and is oxidation resistant as well as scale-resistant at temperatures of up to 1250°C. The high chromiumcontent results in good resistance oxidation, carburization and sulfurous media. The aluminium and nickel content result in a further improvement of the oxidation resi-stance.


C Si Mn Fe Cr Ni S Cu AL

0,10 0,50 1,0 Rest 21,0- 58,0- 0,015 1,0 1,0-max. max. max. 25,0 63,0 max. max. 1,7

Mechanical Properties - at room temperature - solution annealed, cold drawn

0,2 % yield strength tensile strength elongation (A5)hardness

N/mm 2 N/mm 2 % RB205-415 550-760 65-35 70-95

Specification:Pipes/ Tubes: DIN 17751

Plates/Sheets: DIN 17750



Welding methods: Details on request


Product forms: Tubes and pipes, plates and sheets, bars wire

Range of application: heat treating baskets and fixtures, trays, radianttubes, muffles, retorts, flame shields, burnernozzls etc. Techalloy 601 is a new grade forthe space and processing industry.



Techalloy 625 is an alloy with high resistance and ductility at lowest temperatures and up to 1100° C. Techalloy 625 is not magnetic and apart from its high oxidationresistance it is also resistant against many media. High resistance against stress corrosion cracking, pitting and crevice corrosion is alsoa main characteristic of Techalloy 625.


C Si Mn Fe Cr Ni S Mo Al Nb/Ta Ti P Co

0,10 0,5 0,50 5,0 20,0- 58,0 0,015 8,0- 0,40 3,15- 0,40 max. max.max. max. max. max. 23,0 min. max. 10,0 max. 4,15 max. 0,015 1,0*

* If determinedMechanical Properties - at room temperature - solution annealed condition



Specification:

Pipes/ Tubes: ASTM-B-444

Welded Pipes/ Tubes: ASTM-B-704/705

Plates/ Sheets: ASTM-B-443

Bars: ASTM-B-446



Welding methods: Arc welding, TIG,MIG, UP and autogenouswelding(details on request)


Product forms: Tubes and pipes, plates and sheets, bars, wire

Range of application: fuel and hydraulic line tubing, thrust-reversersystems, spray bars, bellows, thrust-chambertubing for rocket motors, reaction vessels,distillation columns, heat exchanger tubes,valves etc.



Techalloy 800 is an austenitic alloy with high tensile strength and resistance against oxidation and carburization at high temperatures. This grade is resistant to stresscorrosion cracking, sulfurous media and scale. The solution annealed execution of Techalloy 800, Techalloy 801, has significantly highercreep strength.


Ni C Mn Fe S Si Cu Cr Al Ti

30,0 0,10 1,5 Rest 0,015 1,0 0,75 19,0- 0,15- 0,15-35,0 max. max. (Balance) max. max. max. 23,0 0,60 0,60

Mechanical Properties - at room temperature - annealed, cold drawn condition



Specification:Pipes/Tubes: ASTU-B-407



Bars: ASTM-B446



Welding methods: Arc welding, TIG, MIG, autogenous welding,without thermal retreatment (details on request)


Corrosion resistance: Refer to table "Corrosion Data" on page 23, 24 and 25

Product forms: Tubes and pipes. fittings, flanges, plates andsheets bars, forgings and wire

Range of application: Techalloy 800 is mainly employed for all equipmentand heating tubes in the furnace-building industry,in the petrochemical industry, Techalloy 800is used for heat exchangers and other pipingsystems; in the plastics, chemical and food industry, where, due to chlorid-ions, great demands aremade on the stress corrosion cracking resistance, Techalloy 800 is also used for steamgenerator tubingin nuclear power plants and as sheathinon electricheating elements in domestic appliances etc.


Techalloy 800HUNS No. N08810, DIN W.Nr. 1.4876

Techalloy 825 is a thermally stabilized alloy which is resistant to both inorganic and organic acids. It has excellent resistance to oxidizing and nonoxidizing hot acidconditions and at temperatures up to the boiling point it is resistant to many acids and alkaline solutions.


C Si Mn Fe Cr Ni S Cu Al Ti

0,05- 1,0 1,5 Rest 19,0- 30,0- 0,015 0,75 0,15- 0,15-0,10 max. max. 23,0 35,0 max. max. 0,60 0,60

Mechanical Properties - at room temperature - annealed condition, cold drawn



Specification:




Bars: ASTM-B-408


Melting range: 1335- 1385° C

Welding methods: Arc welding and common welding processes


Range of application: Techalloy 800H is employed where maximumcreep-rupture strength is required.



Techalloy 825 is a thermally stabilized alloy which is resistant to both inorganic and organic acids. It has excellent resistance to oxidizing and nonoxidizing hot acidconditions and at temperatures up to the boiling point it is resistant to many acids and alkaline solutions.


C Si Mn Fe Cr Ni S Mo Cu Al Ti

0,025 0,5 1,0 Rest 19,5- 38,0-- 0,03 2,5- 1,5- 0,2 0,6-max. max. max. 23,5 46,0 max. 3,5 3,0 max. 1,2

Mechanical Properties - at room temperature - annealed condition, cold drawn



Specification:




Bars: ASTM-B-425



Welding methods: Arc welding, TIG, MIG, plasma, autogenous welding (Details on request)Note: Take care that the surface is cleanedbefore welding


Corrosion resistance: Refer to table "Corrosion Data" on page 25, 26 and 27

Product forms: Tubes and pipes, fittings, flanges, plates andsheets, bars, forgings

Range of application: Techalloy 825 is employed for phosphoric acidevaporators, pickling vats, plants for chemicalprocessing, propeller shafts, transportationmeans for corrosive media etc.


Techalloy B-2UNS No. N10665, DIN W.Nr. 2.4617

Techalloy B-2 is the further development of Techalloy B and has the same excellent corrosion resistance to boiling hydrochloric acid/hydrogene chloride and boilingsulfuric acid (up to a concentration of 60 %). Techalloy B-2 is resistant to carbide grain boundary separations in the heat-influenced welding zone so that it can be em-ployed for most chemical applications without heat-treatment. Techalloy B-2 is furthermore resistant to stress corrosion cracking as well as pitting corrosion.

Chemical Composition: in %

C Si Mn Fe Cr Ni S P Mo Co

0,02 0,10 1,0 2,0 1,0 Rest 0,03 0,04 26-30 1,0max. max. max. max. max. max. max.. max.

Mechanical Properties - at room temperature - solution annealed condition



Specification:




Bars: ASTM-B-335


Welding methods: Arc welding, TIG(Details on request)

Machineability: Details on request

Corrosion resistance: Refer to table TECHALLOY B-2 on page 22

Product forms: Tubes and pipes, plates and sheet, bars, wire

Range of application: Techalloy B-2 is especially suited for applicationsconveying hydrochloric acid gas, sulfuric acid,acetic acid and phosphoric acid.


Techalloy C-276UNS No. N10276, DIN W.Nr. 2.4819

Techalloy C-276 is the improved version of Techalloy C and is resistant to numerous media including strongly oxidizing chemicals (for example iron andcupric chloride) warm polluted acids, solvents, chloride and media contaminated by chloride (organic and inorganic), dry chloride, formic and acetic acid, acetic anhy-dride, sea water and saline solutions. Furthermore, Techalloy C-276 is resistant when exposed to damp chlorine gas, hypochlorite and chlorodioxide solutions.Techalloy C-276 combines this excellent corrosion resistance with immensely improved machineability. This alloy does not separate grain boundaries in the zone influ-enced by welding so that it is suited for most chemical applications even without heat-treatment.

Chemical Composition: in % max.

C Si Mn Fe Ni Cr S p Mo W Co V

0,01 0,08 1,0 4-7 57 14,5- 0,03 0,04 15-17 3-4,5 2,5 0,35max. max. max. Rest 16,5 max. max. max. max.




Specification:

Pipes/Tubes: ASTM-B.622



Specific Weight: 8,88 kg/dm3

Melting range ca. 1323° Celsius

Welding methods: Arc welding. TIG(Details on request)

Machineability Table on request

Corrosion resistance Refer to table TECHALLOY C-276 on page 22

Product forms: Tubes and pipes. sheets and plates. bars. wire andforgings


Techalloy C-4UNS No. N06455, DIN W.Nr. 2.4610

Techalloy C-4 is a relatively new Ni-Cr-Mo alloy with improved resistance at high temperatures. Even when used for a long period of time in the temperature range of650 - 1050° Celsius, this alloy retains its high ductility and corrosion resistance; furthermore it is highly resistant to grain boundsary separation in the heat-treated zoneinfluenced by welding. Thus it can be employed without heatretreatment. Techalloy C-4 is also highly resistant against stress corrosion cracking and oxidizing atmos-pheres at temperatures up to 1050° Celsius.


C Si Mn Fe Cr Ni S P Mo Co Ti

0,015 0,08 1,0 3,0 14-18 Rest 0,03 0,04 14-17 2,0 0,70max. max. max. max. max. max. max. max.




Specification:

Pipes/Tubes: ASTM-B.622


Plates/Sheets ASTM-B-575


Welding methods: Arc welding, TIG(Details on request)


Corrosion resistance: Refer to table TECHALLOY C-4 on page 24

Product forms: Tubes and pipes, plates and sheet, bars, wire,forgings


Techalloy G3UNS No. N06985, DIN W.Nr. 2.4619

Techalloy G3 is an Ni-Cr-Fe alloy with molybdenum and copper additions. This alloy is similar to Techalloy G. Techalloy G3 has excellent corrosion resi-stance to oxidizing chemicals. Due to its nickel and copper content, it is furthermoreresistant to reducing chemicals. Techalloy G3 is very suited for evaporators, heatexchangers in air pollution control systems, tank liners etc.


Ni Cr Fe Mo Cu Nb/Ta CRest 21,0-23,0 18,0-21,0 6,0 - 8,0 1,5 - 2,5 0,50 0,015

max. max.

W Si Mn P S Co1,5 1,0 1,0 0,04 0,03 5,0max. max. max. max. max. max.



N/mm2 N/mm2 %241 621 40,0min. min. min.

Specification:


Welded Pipes/Tubes: ASTM-B-6 1 9/626

Sheets/Plates: ASTM-B-582


Welding Methods: Arc welding


Product forms: Tubes and pipes, sheets, plates and strips, bars

Range of application: Flue gas desulfurization systems, air pollutioncontrol systems, evaporators, heat exchangers,tank liners etc.


Techalloy DSDIN W.Nr. 1.4864

Techalloy DS is a heat-resistant Ni-Cr-Fe alloy with Si-addition for the employment at high temperatures where sufficient strength and corrosion resistance are requi-red. Techalloy DS is heat-resistant up to 1100° Celsius when in fresh air. This alloy is especially resistant against changing oxidizing/reducing conditions as well asagainst the formation of sigma phase in the critical temperature range of 590 to 870° Celsius. Furthermore it is resistant to green rot. Due to the high strength and heatresistance of Techalloy DS, smaller sections than usual can be manufactured from this material.

Chemical Composition: in %

C Si Mn Fe Cr Ni Cu Ti S

0,1 1,9- 0,8- Rest 17,0- 34,5- 0,5 0,20 0,03max. 2,6 1,5 19,0 41,0 max. max.


0,2 % yield strength tensile strength elongation


Specification:

Pipes/Tubes: BS 3074 NA 17

Plates/Sheets: BS 3072/3073 Na 17


Melting range: 1330 - 1400° Celsius

Welding methods: Arc welding. TIG, MIG, plasma, autogenouswelding (Details on request)


Product forms Tubes and pipes. plates and sheets, bars. forgings

Range of application: Techalloy DS is mainly employed for all equipmentand heating tubes in the furnace-building industry,it is used in a multiplicity of heat-treatmentapplications, i.a. for thermocouple element shieldtubes etc.


Typical Size Range for Seamless and Welded Titanium HeatExchanger and Condenser Tubes

Outside BWG gauge wall thickness

Diameter 22 20 18 16 14 12 11 10

0.711 mm 0.889 mm 1.244 mm 1.650 mm 2.108 mm 2.768 mm 3.047 mm 3.403 mm

inches mm kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m

1/4“ 6.350 0.057 0.069 0.090 0.110 0.126 0.140 0.142 0.142

5/16“ 7.950 0.073 0.089 0-118 0.147 0.174 0.203 0.211 0.219

3/8“ 9.525 0.089 0.109 0.146 0.184 0.221 0.264 0.279 0.295

1/2“ 12.700 0.121 0.148 0.202 0.258 0.316 0.389 0.416 0.447

5/8“ 15.875 0.152 0.188 0.257 0.332 0.410 0.513 0.553 0.600

3/4“ 19.050 0.184 0.228 0.313 0.406 0.505 0.637 0.690 0.753

7/8“ 22.225 0.216 0.268 0.369 0.480 0.600 0.762 0.826 0.906

1“ 25.400 0.248 0.308 0.425 0.554 0.694 0.886 0.963 1.059

1 1/4“ 31.750 0.312 0.388 0.537 0.702 0.884 1.134 1.237 1.364

1 1/2“ 38.100 0.376 0.468 0.648 0.850 1.073 1.383 1.510 1.670

1 3/4“ 44.450 0.440 0.548 0.760 1.000 1.262 1.631 1.784 1.975

2“ 50.800 0.504 0.627 0.872 1.147 1.451 1.880 2.057 2.281

2 1/2“ 63.500 0.631 0.787 1.095 1.443 1.830 2.377 2.605 2.892

3“ 76.200 0.759 0.947 1.319 1.739 2.209 2.874 3.152 3.503

3 1/2“ 88.900 0.887 1.106 1.542 2.036 2.587 3.371 3.700 4.114

4“ 101.600 1.014 1.266 1.765 2.332 2.966 3.868 4.246 4.725

(specific weight: 4,505) other sizes on request

Weight Formula: (OD-WT) x WT x 0,01414For min. wall please add 10 %


Properties of Titanium Tubesas per ASTM B338 and ASME SB338

A. Compositions

ASTM Grade 1 2 3 7 9 11 12

(sim. DIN Grade) (3.7025) (3.7035) (3.7055) (3.7235) (-) (3.7225) (3.7195)

Nitrogen 0.03 0.03 0.05 0.03 0.02 0.03 0.03

Carbon 0.10 0.10 0.10 0.10 0.10 0.10 0.08

Hydrogen 0.015 0.015 0.015 0.015 0.015 0.015 0.015

Iron 0.20 0.30 0.30 0.30 0.25 0.20 0.30

Oxygen 0.18 0.25 0.35 0.25 0.15 0.18 0.25

Aluminium - - - - 2.5-3.5 - -

Vanadium - - - - 2.0-3.0 - -

Palladium - - - 0.12-0.25 - 0.12-0.25 -

Molybdenum - - - - - - 0.2-0.4

Nickel - - - - - - 0.6-0.9

Residuals/Each 0.1 0.1 0.1 0.1 0.1 0.1 0.1

Residuals/Total 0.4 0.4 0.4 0.4 0.4 0.4 0.4

Titanium Rem. Rem. Rem. Rem. Rem. Rem. Rem.

B. Mechanical Properties (Annealed)

MPa MPa MPa MPa MPa MPa MPa

Tensile Strength 240 345 450 345 620 240 483

(Min.)

Yield Strength 170 275 380 275 483 170 345

(Min.)*

Yield Strength 310 450 550 450 - 310 -

(Max.)*

Elongation % 24 20 18 20 15 24 18

(Min.)**

* 0.2% Offset ** in 2 inch or 50 mmplease consult us, if other grades are required


Comparison of Common Titanium DIN- and ASTM Grades

ASTM-Grades Alloy Features

Grade 1 (unalloyed Titanium): is used to increase formability.

Grade 2 (unalloyed Titanium): ist the most common Titanium grade for cooling water systems. Good strength with high ductility,formability, weldability and corrosion resistance.

Grade 3 (unalloyed Titanium): is specified when higher levels of strength are required.

Grade 7 (unalloyed Titanium): enhanced resistance to hot brine crevice corrosion and reducing acids, mechanical properties similar to grade 2 alloy.

Grade 9 (Titanium alloy): offers excellent corrosion resistance to sea water and is medium-high strength alloy with highestcode design allowables.

Grade 11 (unalloyed Titanium):Mechanical properties are the same as those of grade 1 however, with greater resistance to corrosionagainst acid chlorides.

Grade 12 (Titanium alloy): is more resistant even at temperatures up to 300°C with improved strength and code design allowables over grade 2.

Comparison of Common Titanium DIN- and ASTM Grades

A. Chemical Analysis

DIN STANDARD ASTM STANDARD DIN STANDARD ASTM STANDARD DIN STANDARD ASTM STANDARD

3.7025 Grade 1 3.7035 Grade 2 3.7055 Grade 3

IRON: 0,15 % MAX. 0,20 % MAX. 0,20 % MAX. 0,30 % MAX. 0,25 % MAX. 0,30 % MAX.

OXYGEN: 0,12 % MAX. 0,18 % MAX. 0,18 % MAX. 0,25 % MAX. 0,25 % MAX. 0,35 % MAX.

NITROGEN: 0,05 % MAX. 0,03 % MAX. 0,05 % MAX. 0,03 % MAX. 0,05 % MAX. 0,05 % MAX.

CARBON: 0,06 % MAX. 0,10 % MAX. 0,06 % MAX. 0,10 % MAX. 0,06 % MAX. 0,10 % MAX.

HYDROGEN: 0,013 % MAX. 0,015 % MAX. 0,013 % MAX. 0,015 % MAX. 0,013 % MAX. 0,015 % MAX.

RESIDUALS: 0,15-0,25 % 0,4 % MAX. 0,15-0,25 % 0,4 % MAX. 0,15-0,25 % 0,4 % MAX.

TITANIUM: REMAINDER REMAINDER REMAINDER REMAINDER REMAINDER REMAINDER

B. MECHANICAL PROPERTIES

TENSILE

STRENGTH 290-410 240 MIN. 390 - 540 345 MIN. 460-590 450 MIN.

IN MPA:

YIELD

STRENGTH 200 MIN. 170-310 270 MIN. 275-450 350 MIN. 380-550

IN MPA:

ELONGATION: 30 % MIN. 24 % MIN. 22 % MIN. 20 % MIN. 18 % MIN. 18 % MIN.


Typical Tensile Properties and Hardness of Condenser TubeMaterials/Comparison with other Materials

Comparison with other Materials

Material Yield Strength Tensile Strength Hardness Elongation

(MPa) (MPa) (Vickers) (%)

Titanium Grade 2 334 432 145 40

18-8 Stainless Steel (annealed) 275 598 142 68

Aluminium Brass (annealed) 177 451 85 55

Admiralty Brass (annealed) 137 343 75 65

70-30 Cupronickel (annealed) 177 422 95 45

90-10 Cupronickel (annealed) 137 353 75 42

Material Density Melting Thermal Coefficient Modulus of Electrical

kg/m3 point conductivity of thermal elasticity resistivity

°C W/(m.K.) expansion MPa Ohm x m

Titanium 4505 1667 17 8.4 x 10-6 106.4 X 103 55.0 X 10-8

Monel 8800 1325 26 14.0 x 10-6 179.5 x 103 48.0 x 10-8

Nickel 8900 1453 92 15.0 x 10-6 206.0 x 103 9.5 x 10-8

Stainless Steel 7900 1410 16 17.0 x 10-6 200.1 x 103 72.0 x 10-8

Aluminium 2700 660 205 23.0 x 10-6 69.2 x 103 2.7 X 10-8

Brass 8400 970 100 18.5 x 10-6 107.9 x 103 7.5 x 10-8

Iron 7900 1530 63 12.0 x 10-6 206.0 x 103 9.7 x 10-8

Copper 8900 1083 385 17.0 x 10-6 107.9 x 103 1.7 x 10-8


Copper Alloy Tube Sheets

Physical Properties English units C.G.S. Units

Melting Point (Liquidos) 1660 F 905 CMelting Point (Solidos) 1650 F 900 CDensity ,303 Ib/cu in a 68 F 8,39 gm/cu cm a 20 CSpecific Gravity 8,39 8,39Coefficient of Thermal Expansion ,0000116 per °F from 68 F to 572 F ,0000208 per °C from 20 C to 300 CThermal Conductivity 71 Btu/sq ft/ft/hr/°F a 68 F ,29 cal/sq cm/cm/sec/°C a 20 CElectrical Resistivity (Annealed) 37,0 Ohms (circ mil/ft) a 68 F 6,16 Microhm-cm a 20 CElectrical Conductivity* (Annealed) 28 % IACS a 68 F ,162 Megmho-cm a 20 CThermal Capacity (Specific Heat) ,09 Btu/ib °F a 68 F ,09 cal/gm/°C a 20 CModulus of Elasticity (Tension) 15,000 ksi 10,500 Kg/sq mmModulus of Rigidity 5,600 ksi 3,900 Kg/sq mm

*Volume Basis

Typical Uses

Architectural Metal Work and Panels

Mechanical Properties

It is not practical to provide a table of typical mechanical properties, since plate mechanical properties vary widely according to plate dimensions and processing.Reverse Copper Products, Inc. is able to meet the mechanical properties of most plate specifications. However, it is often possible to develop specific mechanical properties for a particular enduse.

Fabrication Properties

Capacity for Being Cold Worked Fair Suitability for being joined by:Capacity for Being Hot Formed Excellent Doldering ExcellentHot Forgeability Rating (Forging Brass=100) 90 Brazing ExcellentHot Working Temperature 1150-1450 F or 625-800 C Oxyacetylene Welding GoodAnnealing Temperature 800-1100 F or 425-600 C Gas Shielded Arc Welding FairMachinability Rating (Free Cutting Brass=100) 40 Coated Metal Arc Welding Not recommended

Resistance Welding:Spot GoodSeam Not recommendedButt Good

Copper Alloy No. C2800 (Muntz Metal)

Composition- Nominal Minimum Maximum Nearest Applicablepercent ASTM Specifications

Copper 60 59,0 63,0 Plate ProductsLead 0,30Iron 0,07Zinc 40 remainder



Copper Alloy No. C36500 (Leaded Muntz Metal, Uninhibited)


Melting Point (Liquidos) 1650 F 900 CMelting Point (Solidos) 1630 F 885 CDensity ,304 Ib/cu in a 68 F 8,41 gm/cu cm a 20 CSpecific Gravity 8,41 8,41Coefficient of Thermal Expansion ,0000116 per °F from 68 F to 572 F ,0000208 per °C from 20 C to 300 CThermal Conductivity 71 Btu/sq ft/ft/hr/°F a 68 F ,29 cal/sq cm/cm/sec/°C a 20 CElectrical Resistivity (Annealed) 37,0 Ohms (circ mil/ft) a 68 F 6,16 Microhm-cm a 20 CElectrical Conductivity* (Annealed) 28 % IACS a 68 F ,162 Megmho-cm a 20 CThermal Capacity (Specific Heat) ,09 Btu/ib °F a 68 F ,09 cal/gm/°C a 20 CModulus of Elasticity (Tension) 15,000 ksi 10,500 Kg/sq mmModulus of Rigidity 5,600 ksi 3,900 Kg/sq mm

*Volume Basis

Typical Uses

Heatexchangers - Tube Plates and Baffles


It is not practical to provide a table of typical mechanical properties, since plate mechanical properties vary widely according to plate dimensions and processing.Reverse Copper Products, Inc. is able to meet the mechanical properties of most plate specifications. However, it is often possible to develop specific mechanical properties for a particular end use.


Capacity for Being Cold Worked Fair Suitability for being joined by:Capacity for Being Hot Formed Excellent Soldering ExcellentHot Forgeability Rating (Forging Brass=100) None Brazing GoodHot Working Temperature 1150-1450 F or 625-800 C Oxyacetylene Welding FairAnnealing Temperature 800-1100 F or 425-600 C Gas Shielded Arc Welding FairMachinability Rating (Free Cutting Brass=100) 60 Coated Metal Arc Welding Not recommended

Resistance Welding:Spot Not recommendedSeam Not recommendedButt Fair

Composition- Nominal Minimum Maximum Nearest Applicablepercent ASTM Specifications

Copper 59,5 58,0 61,0 Plate ProductsLead 0,50 0,25 0,70Iron 0,15Tin 0,25Zinc 40 remainder



Copper Alloy No. C44300 (Admiralty, Arsenical)

Composition-percent Nominal Minimum Maximum

Copper 71,0 70,0 73,0Lead 0,07Iron 0,06Tin 1 0,08 1,20Arsenic 0,02 0,06Zink 28 remainder


Melting Point (Liquidos) 1720 F 935 CMelting Point (Solidos) 1650 F 900 CDensity ,308 lb/cu in a 68 F 8,53gm/cu cm a 20 CSpecific Gravity 8,53 8,53Coefficient of Thermal Expansion ,0000112 per °F from 68 F to 572 F ,0000202 per °C from 20 C to 300 CThermal Conductivity 64 Btu/sq ft/ft/hr/°F a 68 F ,26 cal/sq cm/cm/sec/°C a 20 CElectrical Resistivity (Annealed) 41,5 Ohms (circ mil/ft) a 68 F 6,90 Microhm-cm a 20 CElectrical Conductivity* (Annealed) 25% IACS a 68 F ,145 Megmho-cm a 20 CThermal Capacity (Specific Heat) ,09 Btu/ib °F a 68 F ,09 cal/gm/°C a 20 CModulus of Elasticity (Tension) 16,000 ksi 11,200 Kg/sq mmModulus of Rigidity 6,000 ksi 4,200 Kg/sq mm

* Volume Basis

Nearest ApplicableASTM Specifications

Plate Products B171

Typical Uses

Condenser Tube Plates and Baffles


It is not practical to provide a table of typical mechanical properties, since plate mechanical properties vary widely according to plate dimensions and processing.

Reverse Copper Products, Inc. is able to meet the mechanical properties of most plate specifications. However, it is often possible to develop specific mechanical properties for a particular end use.


Capacity for Being Cold Worked ExcellentCapacity for Being Hot Formed FairHot Forgeability Rating (Forging Brass=100) NoneHot Working Temperature 1200-1450 F or 650-800 CAnnealing Temperature 800-1100 F or 425-600 CMachinability Rating (Free Cutting Brass=100) 30

Suitability for being joined by:Soldering ExcellentBrazing Excellent Oxyacetylene Welding GoodGas Shielded Arc Welding FairCoated Metal Arc Welding Not recommendedResistance Welding:

Spot GoodSeam Not recommendedButt Good



Copper Alloy No. C46400 (Naval Brass, Uninhibited), Copper Alloy No. C46500 (Naval Brass, Arsenical)

Composition- percent Nominal Minimum Maximum

C46400Copper 60 59,0 62,0Lead 0,20Iron 0,10Tin 0,08 0,50 1,00Zinc 28 remainderC46500 - Same as C46400 with:Arsenic 0,02 0,06


Melting Point (Liquidos) 1650 F 900 CMelting Point (Solidos) 1630 F 885 CDensity ,304 lb/cu in a 68 F 8,41gm/cu cm a 20 CSpecific Gravity 8,41 8,41Coefficient of Thermal Expansion ,0000118 per °F from 68 F to 572 F ,0000212 per °C from 20 C to 300 CThermal Conductivity 67 Btu/sq ft/ft/hr/°F a 68 F ,28 cal/sq cm/cm/sec/°C a 20 CElectrical Resistivity (Annealed) 39,9 Ohms (circ mil/ft) a 68 F 6,63 Microhm-cm a 20 CElectrical Conductivity* (Annealed) 26% IACS a 68 F ,151 Megmho-cm a 20 CThermal Capacity (Specific Heat) ,09 Btu/ib °F a 68 F ,09 cal/gm/°C a 20 CModulus of Elasticity (Tension) 15,000 ksi 10,500 Kg/sq mmModulus of Rigidity 5,600 ksi 3,900 Kg/sq mm

* Volume BasisTypical Uses

Typical Uses

Condenser Tube Plates and Baffles Petro Chemical Equipment Architectural Metal WorkFlanges Marine Euipment Tool Plate





Plate Products B171


Capacity for Being Cold Worked FairCapacity for Being Hot Formed ExcellentHot Forgeability Rating (Forging Brass=100) 90Hot Working Temperature 1200-1500 F or 650-825 CAnnealing Temperature 800-1100 F or 425-600 CMachinability Rating (Free Cutting Brass=100) 30

Suitability for being joined by:Soldering ExcellentBrazing Excellent Oxyacetylene Welding GoodGas Shielded Arc Welding FairCoated Metal Arc Welding Not recommendedResistance Welding:

Spot GoodSeam FairButt Good



Copper Alloy No. 61400 (Aluminium Bronze)


Copper (incl. Silver) 91 remainderLead 0,10Iron 2 1,5 3,50Zinc 0,20Aluminium 7 6,0 8,00Manganese 1,00Phosphorus 0,015


Melting Point (Liquidos) 1915 F 1045 CMelting Point (Solidos) 1905 F 1040 CDensity ,285 lb/cu in a 68 F 7,89 gm/cu cm a 20 CSpecific Gravity 7,89 7,89Coefficient of Thermal Expansion ,0000090 per °F from 68 F to 572 F ,0000162 per °C from 20 C to 300 CThermal Conductivity 39 Btu/sq ft/ft/hr/°F a 68 F ,16 cal/sq cm/cm/sec/°C a 20 CElectrical Resistivity (Annealed) 74,1 Ohms (circ mil/ft) a 68 F 12,3 Microhm-cm a 20 CElectrical Conductivity* (Annealed) 14% IACS a 68 F ,081 Megmho-cm a 20 CThermal Capacity (Specific Heat) ,09 Btu/ib °F a 68 F ,09 cal/gm/°C a 20 CModulus of Elasticity (Tension) 17,000 ksi 12,000 Kg/sq mmModulus of Rigidity 6,400 ksi 4,500 Kg/sq mm

* Volume Basis

Typical Uses

Heatexchangers Pumps Marine Applications incl.Desalination Equipment ValvesProtective SheatingFlanges Piping Systems Corrosion Resistant Tanks andFittingsVessels





Plate Products B169, B171


Capacity for Being Cold Worked GoodCapacity for Being Hot Formed GoodHot Forgeability Rating (Forging Brass=100) 50Hot Working Temperature 1450-1500 F or 800-925 CAnnealing Temperature 1125-1650 F or 600-900 CMachinability Rating (Free Cutting Brass=100) 30

Suitability for being joined by:Soldering Not recommendedBrazing Fair Oxyacetylene Welding Not recommendedGas Shielded Arc Welding GoodCoated Metal Arc Welding GoodResistance Welding:

Spot GoodSeam GoodButt Good



Copper Alloy No. C63000 (Nickel Aluminium Bronze)


Copper (incl. Silver) 82 Iron 3 2,0 4,00Tin 0,20Zinc 0,30 Aluminium 10 9,0 11,0Manganese 1,50Silicon 0,25Nickel (incl.Cobald) 5 4,0 5,50


Melting Point (Liquidos) 1930 F 1054 CMelting Point (Solidos) 1895 F 1035 CDensity ,274 lb/cu in a 68 F 7,58 gm/cu cm a 20 CSpecific Gravity 7,58 7,58Coefficient of Thermal Expansion ,0000090 per °F from 68 F to 572 F ,0000162 per °C from 20 C to 300 CThermal Conductivity 22,9 Btu/sq ft/ft/hr/°F a 68 F ,09 cal/sq cm/cm/sec/°C a 20 CElectrical Resistivity (Annealed) 116 Ohms (circ mil/ft) a 68 F 19,2 Microhm-cm a 20 CElectrical Conductivity* (Annealed) 7% IACS a 68 F ,041 Megmho-cm a 20 CThermal Capacity (Specific Heat) ,09 Btu/ib °F a 68 F ,09 cal/gm/°C a 20 CModulus of Elasticity (Tension) 17,500 ksi 12,250 Kg/sq mmModulus of Rigidity 6,400 ksi 4,500 Kg/sq mm

* Volume Basis

Typical Uses






Plate Products B171


Capacity for Being Cold Worked PoorCapacity for Being Hot Formed GoodHot Forgeability Rating (Forging Brass=100) 75Hot Working Temperature 1450-1700 F or 800-925 CAnnealing Temperature 1100-1300 F or 600-700 CMachinability Rating (Free Cutting Brass=100) 30

Suitability for being joined by:Soldering Not recommendedBrazing Fair Oxyacetylene Welding Not recommendedGas Shielded Arc Welding GoodCoated Metal Arc Welding GoodResistance Welding: Spot Good

Seam GoodButt Good



Copper Alloy No. C70600 (Copper Nickel)


Copper (incl. Silver) 88,6 remainderLead 0,50*Iron 1,4 1,0 1,80Zinc 1,00*Nickel 10 9,0 11,0Manganese 1,00

* When the product is for subsequent welding applications and so specified by the purchaser, Zn shall be 0,50%max., Pb 0,025% max., P 0,02% max., Sulfur 0,02% max. and Carbon 0,05% max.


Melting Point (Liquidos) 2100 F 1150 CMelting Point (Solidos) 2010 F 1100 CDensity ,323 lb/cu in a 68 F 8,94 gm/cu cm a 20 CSpecific Gravity 8,94 8,94Coefficient of Thermal Expansion ,0000095 per °F from 68 F to 572 F ,0000171 per °C from 20 C to 300 CThermal Conductivity 26 Btu/sq ft/ft/hr/°F a 68 F ,11 cal/sq cm/cm/sec/°C a 20 CElectrical Resistivity (Annealed) 115 Ohms (circ mil/ft) a 68 F 19,1 Microhm-cm a 20 CElectrical Conductivity* (Annealed) 9,0% IACS a 68 F ,0522 Megmho-cm a 20 CThermal Capacity (Specific Heat) ,09 Btu/ib °F a 68 F ,09 cal/gm/°C a 20 CModulus of Elasticity (Tension) 18,000 ksi 12,700 Kg/sq mmModulus of Rigidity 6,800 ksi 4,800 Kg/sq mm

* Volume Basis

Typical Uses








Capacity for Being Cold Worked GoodCapacity for Being Hot Formed GoodHot Forgeability Rating (Forging Brass=100) NoneHot Working Temperature 1550-1750 F or 890-950 CAnnealing Temperature 1100-1500 F or 600-825 CMachinability Rating (Free Cutting Brass=100) 20

Suitability for being joined by:Soldering ExcellentBrazing Excellent Oxyacetylene Welding FairGas Shielded Arc Welding ExcellentCoated Metal Arc Welding GoodResistance Welding: Spot Good

Seam GoodButt Excellent



Copper Alloy No. C71500 (Copper Nickel)


Copper 69,5 remainderLead 0,50*Iron 0,50 0,40 1,00Zinc 1,00*Nickel 30,0 29,0 33,0Manganese 1,00


Melting Point (Liquidos) 2260 F 1240 CMelting Point (Solidos) 2140 F 1170 CDensity ,323 lb/cu in a 68 F 8,94 gm/cu cm a 20 CSpecific Gravity 8,94 8,94Coefficient of Thermal Expansion ,0000090 per °F from 68 F to 572 F ,0000162 per °C from 20 C to 300 CThermal Conductivity 17 Btu/sq ft/ft/hr/°F a 68 F ,07 cal/sq cm/cm/sec/°C a 20 CElectrical Resistivity (Annealed) 225 Ohms (circ mil/ft) a 68 F 37,5 Microhm-cm a 20 CElectrical Conductivity* (Annealed) 4,6% IACS a 68 F ,0267 Megmho-cm a 20 CThermal Capacity (Specific Heat) ,09 Btu/ib °F a 68 F ,09 cal/gm/°C a 20 CModulus of Elasticity (Tension) 22,000 ksi 15,500 Kg/sq mmModulus of Rigidity 8,300 ksi 5,800 Kg/sq mm

* Volume Basis




Capacity for Being Cold Worked GoodCapacity for Being Hot Formed GoodHot Forgeability Rating (Forging Brass=100) NoneHot Working Temperature 1700-1900 F or 925-1050 CAnnealing Temperature 1200-1500 F or 650-825 CMachinability Rating (Free Cutting Brass=100) 20

Suitability for being joined by:Soldering ExcellentBrazing Excellent Oxyacetylene Welding GoodGas Shielded Arc Welding ExcellentCoated Metal Arc Welding ExcellentResistance Welding: Spot Excellent

Seam ExcellentButt Excellent

* When the product is for subsequent welding applications and so specified by the purchaser, Zn shall be 0,50%max., Pb 0,025% max., P 0,02% max., Sulfur 0,02% max. and Carbon 0,05% max.

Typical Uses

Heatexchangers Pumps Marine Applications incl.Desalination Equipment Valves Protective SheatingFlanges Piping Systems Corrosion Resistant Tanks andFittings Vessels





Copper - Copper Alloys


U.S.A. Germany U.K. France Italy Japan GUSASTM DIN Werkst.-Nr. BS FN UNI JIS GOST

C 101 00 OF-Cu 2.0040 C 110 Cu-C2 C1011 M0BC 102 00 SE-Cu 2.0070 C 103 Cu-C1 C1020 M1BC 122 00 SF-Cu 2.0090 C 106 Cu-B Cu-DHPC 122 00 SF-Cu 2.0090 C 106 Cu-B Cu-DHP C1220 M1C 110 00 E-Cu58 2.0060 C 102 Cu-A1 Cu-ETP C1100C 182 00 CuCrZr 2.1293 CC 102C 194 00C 210 00 CuZn5 2.0220 CZ 125* U-Z5 C2100 L96C 220 00 CuZn10 2.0230 CZ 101 U-Z10 P-OT90 C2200 L90C 230 00 CuZn15 2.0240 CZ 102 U-Z15 P-OT85 C2300 L85C 240 00 CuZn20 2.0250 CZ 103 U-ZU20 P-OT80 C2400 L80—- CuZn28 2.0261 P-OT72C 260 00 CuZn30 2.0265 CZ 106 U-Z30 P-OT70 C2600 L70C 260 00 CuZn30* 2.0265* CZ 106 U-Z30 P-OT70 C2600C 268 00 CuZn33 2.0280 CZ 107 U-Z33 P-OT67 C2680 L68C 270 00 CuZn36 2.0335 CZ 108 U-Z36 P-OT65 C2680C 274 00 CuZn37 2.0321 CZ 108 U-Z36 P-OT63 C2720 L63C 349 00 CuZn37Pb3 2.0332C 350 00 CuZn36Pb3 2.0331 CZ 118 P-OT63Pb* C3601 LS63-2C 280 00 CuZn40 2.0360 CZ 123* U-Z40 P-OT60 C3712 L60C 353 00 CuZn38Pb3 2.0371 CZ 128 U-Z36Pb2C 360 00 CuZn36Pb3 2.0375 CZ 124 U-Z36Pb3C 377 00 CuZn39Pb2 2.0380 CZ 120 U-Z39Pb1 P-OT59PbC 380 00 CuZn40Pb2 2.0402 CZ 122 U-Z39Pb2 P-OT58Pb C3771C 385 00 CuZn39Pb3 2.0401 CZ 121 3Pb U-Z39Pb2 P-OT58Pb C3603 LS59-3C 386 00 CZ 121 4Pb—- CuZn44Pb2 2.0410 CZ 130* U-Z41Pb2A*C 687 00 CuZn20Al 2.0460 CZ 110 U-Z2A2 P-OTS77AlC 443 00 CuZn28Sn 2.0470 CZ 111 U-Z29E1 P-OTS71SnC 698 00 CuZn31Sn 2.0490—- CuZn37Al 2.0510C 674 00 CuZn40Al2 2.0550 CZ 114*C 750 00 CuNi18Zn27 NS 107C 752 00 CuNi18Zn20 NS 106C 757 00 CuNi12Zn24 2.0730 NS 104C 770 00 NS 107 U-Z27N18 CuNi12Zn24 C7521C 764 00 CuNi18Zn20 2.0740 NS 106 U-Z22N18 CuNi18Zn20C 796 00 CuNi10Zn42Pb2 2.0770 NS 101* U-Z45N9*C 799 00*C 792 00* CuNi12Zn30Pb 2.0780C 763 00* CuNi18Zn19Pb1 2.0790 NS 113* U-Z20N15Pb

Aluminum Bronzes

C 60600 CuAl5As CA101C 60800 CuAl5As CA101C 61400 CuAl8Fe3 CA106C 62800 CuAl9Ni CA105C 63000 CuAl10Ni5Fe4 CA104 UA11N5Fe UNI7989C 63200 CuAl10Ni5Fe4C 62300 CuAl10Fe3Mn2 C103

Tin Bronzes/Phosphor Bronzes

C 50500 CuSn2C 51100 CuSn4 Pb101 CuSn4P CuSn4 C5110C 51000 CuSn5 Pb102 C5102C 51900 CuSn6 2.1020 Pb103 CuSn6P B6 C5191C 52100 CuSn8 2.1030 Pb104 CuSn9P B8 C5210___ CuSn6Zn 2.1080

Leaded Brass

C36500 CuZn40Pb CZ123 CuZn39Pb1 C3710C37000 CuZn40Pb2 CZ124

Special Copper Zinc Alloys

C 68700 CuZn20Al2 CZ110 U-Z22A2 P-OTS77AlC 44300 CuZn28Sn1 CZ111 U-Z29E1 P-OTS71SnC 67410 CuZn38Sn1 CZ112 AFNOR A51115 UNI 6399

P-CuZn39Sn1C67410 CuZn40Al2C 67810 CuZn40Al1C 69800 CuZn31Si1

Copper Nickel Alloys

C7060090/10 CuNi CuNi10Fe1Mn CN102C7150070/30 CuNi CuNi30Fe1Mn CN107 CuNi30Mn1FeC 75700 CuNi12Zn24 2.0730 NS104 ---C 77000 CuNi18Zn27* --- NS107 U-Z27N18C 76400 CuNi18Zn20 2.0740 NS106 U-Z22N18C 79600 CuNi10Zn42Pb2 2.0770 NS101* U-Z45N9*C 79900* --- --- --- ---C 79200* CuNi12Zn30Pb 2.0780 --- ---C 76300* CuNi18Zn19Pb1 2.0790 NS113* U-Z20N15Pb


Bronze

Comparison of Standards

German British U.S.A. FranceDIN BS ASTM AFNOR

DIN 1705 Rg 5 BS 1400 LG 2 B 50 C 83600 A 53-707G-Cu Sn 5 Zn Pb Cu Pb 5 Sn Zn 5

DIN 1705 Rg 7 BS 1400 LG 3 B 30 3 C 326 U-E 7 Z 5 Pb 4G-Cu Sn 7 Zn Pb NF A 53-707

NF A 53-012

DIN 1705 Rg10 BS 1400 G 1 B 30-2B U-E 8 Z 2G-Cu Sn 10 Zn SAE 621 V NF A 53-707

SAE J 462 62

DIN 1705 BS 1400 PB1 B 30 1 A U-Z 10 90/10G-Sn Bz 10 SAE 640 VG-Cu Sn 10

DIN 1705 BS 1400 PB 2 SAE 65 V U-E 12 PG-Sn Bz 12 SAE J 462 65 NF A 53-707G-Cu Sn 12 NF A 53-012

DIN 1716 BS 1400 LB 2 B 30 3 A U-Pb 8G-Sn Pb Bz 10 B 144-3 A NF A 53-751G-Cu Pb 10 Sn SAE 64 792/ 797 NF A 53-012

DIN 1716 BS 1400 2 B 1 B 30 3 D U-Pb 15 E 8G-Sn Pb Bz 15 B 144-3 D NF A 53-751G-Cu Pb 15 Sn SAE 67

DIN 1716 U-Z 36 MNG-So Ms F 30G-Cu Zn 40 Fe

DIN 1709 B 1400 B 30 7 A U-Z 36 MN AHT B 1 B 30 8 A

G-So Ms F 45 SRE 43 (7462)G-Cu Zn 35 Al 1 B 147-52

DIN 1709 BS 1400 B 30 8 B U-Z 23 A 4G-So Ms F 60 HT B 2 B 30 8 C AIR 3370G-Cu Zn 34 Al 2 SRE 430 A (462)

B 147-8 B

DIN 1714 BS 1400 B 30 9 C U-A 9 N 5 FEG-Ni Al Bz F 60 AB Z B 30 9 D Al 53-709G-Cu Al 10 Ni B 148-9 D U-A 10 N

B 171-E AIR 3370

UNSC 511 00

UNSC 613 00

UNSC 614 00

Cu Al 11 Ni CA 104 UNS UA 11 N 5 FeC 630 00

UNSC 632 00

UNSC 655 00

UNSC 681 00


Aluminium

U.S.A. Germany U.K. U.K. France Italy Japan

ASTM DIN Material-No. BS BS AFNOR UNI JIS

1050 A Al 99,5 3.0255 1050 A (T1B) A 5/ 1050 A 4507 A1T1/1050 A 5

1070A Al 99,7 3.0275 A 7/ 1070 A 4508 A 7

1080 A Al 99,8 3.0285 T1 A

1199 Al 99,98 R 3.0385 T1

1200 Al 99 3.0205 1200 (51C) A 4/ 1200 3567-66 1100/ 1200 A 0

1350 E-Al 3.0257 1350 (E1E) A5 / L A 5 E

2007 AlCuMgPb 3.1645 A-U 4 Pb

2011 Al Cu Bi Pb 3.1655 2011 (F1C) A-U 5 Pb Bi 6362

2014 A Al Cu Si Mn 3.1255 2014 A (HT15) A-U 4 Sg 3501

2017 A Al Cu Mg 1 3.1325 2017 A (HT14) A-U 4 G 3576 A3T2/2017 1510

2024 Al Cu Mg 2 3.1355 2024 A-U 4 G 1 3583 A3T4

3003 Al Mn Cu 3.0517 3003 A-M 1/ 3003 A2T3

3103 Al Mn 1 3.0515 NS 3/ 3103 3568 3103 1400

5005 Al Mg 1 3.3315 5005 A-G 0,6/ 5005 5764 5005 1510

5052 Al Mg 2,5 3.3523 5052 A-G 2,5 C 3574 A2T1

5083 Al Mg 4,5 Mn 3.3547 5083 (NT8) A-G 4,5 MC 7790 5083

5086 Al Mg 4 Mn 3.3545 5086 A-G 4 MC 5462

5154 A 5154 A (NT5) 3575

5251 Al Mg 2 Mn 0,3 3.3525 5251 (NT4) A-G 2 M 1520

5454 Al Mg 2,7 Mn 3.3537 5454 (NT51) A-G 2,5 MC 7789

5754 Al Mg 3 3.3535 5754 A 3 GM 5754 1530

6061 Al Mg Si Cu 3.3211 6061 (HT 20) A-G SUC 6170 A2T4

6063 6063 (HT 9) 3569 A2T5

6082 Al Mg Si 1 3.2315 6082 (HT 30) A-SG M 0,7 3571 1350

6101 A E-Al Mg Al Si 0,5 3.3207 6101 A (E 91 E)

7020 Al Zn 4,5 Mg 1 3.4335 7020 (HT 17) A-Z 5 G 7791

7022 Al Zn Mg Cu 0,5 3.4345 7022 A-ZN 5 GU 0,6

7075 Al Zn Mg Cu 1,5 3.4365

Comparison of Standards


Aluminium

Technical Data

USA ASTM Germany DIN Si Fe Cu Mn Mg Cr Zn Ti Other Elements

Pure Aluminium

1070 Al 99,7* 0,20 0,25 0,03 0,03 0,03 0,07 0,03 0,031000 Al 99,5 0,25 0,40 0,05 0,05 0,05 0,07 0,05 0,031001 E-Al 0,25 0,40 0,02 0,05 0,05 0,031010 Al 99 0,05 0,05 0,05 0,10 0,05 0,05 0,15

Aluminium Alloys

3000 AlMn 1 0,50 0,70 0,10 0,90-1,50 0,30 0,10 0,20 0,10 0,05 0,153000 cl. AlMn 1 cl. 0,50 0,70 0,10 0,90-1,50 0,30 0,10 0,20 0,10 0,05 0,153530 AlMnCu 0,60 0,70 0,05-0,20 1,00-1,50 0,10 0,05 0,153530 cl. AlMnCu cl. 0,60 0,70 0,05-0,20 1,00-1,50 0,10 0,05 0,153560 cl. AlMn1Mg0,5 cl. 0,60 0,70 0,30 1,00-1,50 0,20-0,60 0,10 0,25 0,10 0,05 0,153540 AlM1Mg1 0,30 0,70 0,25 1,00-1,50 0,80-1,30 0,25 0,05 0,153540 cl. AlM1Mg1 cl. 0,30 0,70 0,25 1,00-1,50 0,80-1,30 0,25 0,05 0,153541 AlMn1Mg15010 AlMg1 0,30 0,45 0,05 0,15 0,70-1,10 0,10 0,20 0,05 0,155020 AlMg1,83010 AlMg2MN0,8 0,40 0,50 0,10 0,50-1,10 1,60-2,50 0,30 0,20 0,10 0,05 0,155520 AlMg2,5 0,25 0,40 0,10 0,10 2,20-2,80 0,15-0,35 0,10 0,05 0,155030 AlMg3 0,40 0.40 0,10 0,50 2,60-3,60 0,30 0,02 0,15 0,05 0,155400 AlMg2,7Mn 0,25 0,40 0,10 0,50-1,00 2,40-3,00 0,05-0,20 0,25 0,20 0,05 0,155503 AlMg4Mn 0,40 0,50 0,10 0,20-0,70 3,50-4,50 0,05-0,25 0,25 0,15 0,05 0,155510 AlMg4,5Mn 0,40 0,40 0,10 0,40-1,00 4,00-4,90 0,05-0,25 0,25 0,15 0,05 0,15

Aluminium Alloys

6630 cl. AlMgSi0,5 cl. 0,20-0,60 0,35 0,10 0,10 0,45-0,90 0,10 0,10 0,10 0,05 0,0156010 AlMgSi1 0,70-1,30 0,50 0,10 0,40-1,00 0,60-1,20 0,25 0,20 0,10 0,05 0,0156560 AlMg1SiCu 0,40-0,80 0,70 0,15-0,40 0,15 0,80-1,20 0,04-0,35 0,25 0,15 0,05 0,152170 AlCuMg1 0,20-0,80 0,70 3,50-4,50 0,40-1,00 0,10 0,25 Ti+Zr 0,05 0,15

0,252240 AlCuMg2 0,50 0,50 3,80-4,90 0,30-0,90 1,20-1,80 0,10 0,25 0,15/Ti 0,05 0,15

+Zr0,202140 AlCuSiMn 0,50-1,20 0,70 3,90-5,00 0,40-1,20 0,20-0,80 0,10 0,25 0,15/Ti 0,05 0,15

+Zr0,207350 AlZn4,5Mg1 0,35 0,40 0,20 0,05-0,50 1,00-1,40 0,10-0,35 4,0-5,0 Ti+Zr 0,05 0,15

0,08-0,257750 AlZnMgCu1,5 0,40 0,50 1,20-2,00 0,30 2,10-2,90 0,18-0,28 5,1-6,1 0,20/Ti 0,05 0,15

Zr0,257790 AlZnMgCu0,5 0,50 0,50 0,50-1,00 0,10-0,40 2,60-3,70 0,10-0,30 4,3-5,2 Ti+Zr 0,05 0,15

0,20


Bimetallic Tubes

Bimetallic Tubes

Bimetallic Sheets, Plates, Flanges, Rings, Heads and Fittings

Materials

Carbon Steels TitanChrome Steels Tantal, MolybdenumChrome Nickel Steels Gold, SilverSpecialSteels Zirkonium, Niob

AluminiumCopper, Nickel and its alloys

Out of above and other base- and clad materials we can manufacture all required material combinations.Beside bimetalic claddings we can supply also Multilayer material combinations. Cladded flanges, rings and heads can be produced up to a diameter of 2200 mm and according to rules of DIN, ASTM, Lloyds and others.

For cladding of flanges we have the possibility to manufacture black-white connections. We supply bimetalic flanges where the customer can select the cladding of the sealing surface or the totalflange face or one of these both. The inner Cladding of the flanges is seanless connected with the sealing surface. This assures that the the medium gets in no contact with the outer tube.

We are able to clad rings on the front- and backside as well as on the inside diameter.

Material combinations and kinds of cladding as per customers request. Do not hesitate to contact us.

Nowadays Bimetallic tubes are used for a wide range of applications. Due to the many possible material combinations, they provide big advantages, in view of costs and environment conditions,compared to solid tubes.

The material combinations of bimetalic tubes are almost unlimited. Carbon steels, special steels, austenitic steels, Copper, Nickel and its alloys can be used for outer tube as well as for liner. We are able to propose the optimal combination for your range of application.Length: up to 12 mDiameter: up to 400 mm

Depending on the requirement the liner and outer tube can be mechanically bonded over the whole length. Additionally the ends can be welded or explosive cladded over the whole lengths. Endsare available with:

- Flanges- Threads- Ends prepared for welding

Minimum cladding thickness is 0,6 mm. Because of economical reasons we recommend a liner thickness of max. 3,0 mm. For thin claddings smaller than 2,0 mm and welded tube connec-tions, weoffer a process which provides additional corrosive resistance in the welding area. This can be done at site.


Open Steel Flooring

General Glossary of Terms


Welding EndsWelding End Preparation

MeasuresForm Designation Sectional-view Wall Angle Distance path

Thickness inch a ß inch') inch

DIN 2559 ≤3 - - 0 to 3 -F1 ≤0.118 - - 0 to 0.118 -

I-seam

DIN 2559 ≤16 ~ 60° - 0 to 4 -F2 ≤0.630 0 to 0.157 -

V-seam

ASA - ≤19 ~37 1/2° - 0 to 4 ~ 1,6B 1 6,9 - ≤0.750 0 to 0.157 ~0.063

≤19API Std - ≤0.750 30° - 0 to 4 ~1,6SL/SLX - 0 to 0.157 0.063

≥12 -DIN 2559 ≥0.472 - ~10° 0 bis 3 2F3 0 to 0.118 0,079

U-seam

≥12 30° ~10° 0 bis 4 ~4DIN 2559 ≥0.472 0 to O.157 ~0.157F4

U-seam on V-root

DIN 2559 ≥16 ~35° ~6° 0 bis 2 ~6F5 ≥0.630 0 to 0.079 ~0.236

U-seam onV-root

ASA - >19 ~37 1/2° ~10° 0 to 2 ~1.6B 16,9 - >0.750 0 to 0.079 ~0.063


+ = resistant0 = limited resistant— = Changeable* = soluble

Brandy — 0 + + + + + +Carbon Disulphide 100 + + + — 0 0 + — — —Carbon Tetrachloride 100 + — + — 0 0 0 0 — — 0Copper Sulphate 10 + + + + + + + + +Hydrochloric Acid 10 — + 0 — — + + + + + +Hydrochloric Acid 2 0 + 0 0 — + + + + + +Hydrogen Peroxide 0,5 0 + + 0 + + + + +Hydrogen Peroxide 1 — + + 0 + + + + +Hydrogen Peroxide 3 — + + 0 — + + + +Hydrogen Peroxide 10 — + + — — + + + +Hydrogen Peroxide 30 — + + — — + + + +Hydrogen Sulphide 2 + + + + + + +Lactic Acid 10 0 + + 0 + + + 0Magnesium Chloride, watery 10 + + + + + + + + +Manganese 10 + + + + + + + + + +Mathanol 98 + + 0 — + + + 0 — + —Methyl Acetate 100 + + + 0 + + +Methyl Ethyl Ketone 100 + + 0 + + + — — —Methyl Chloride 100 0 0 — — — 0 0 — —Nitric Acid 65 — — — — — 0 0 + 0 —Nitric Acid 10 — + 0 0 — + + + + + +Nitrobenzene 100 0 + + — 0 + + +Oil 100 + + + + + + + + + +Oil Acid, conc. 40 + 0 0 + — + + + +Oxalic Acid 10 — 0 + — + + + + + +Ozone - — — — — 0 0 + +Paraffin 100 + + + 0 + + + 0Phenol 100 * + — — — + + + — —Phenol, watery 10 — + — — — + + + — —Phosphoric Acid 80 — + — — + + + —Phosphoric Acid 10 — + + — — + + + + + +Pyridin 100 + 0 + — + + + — — —Quicksilver (Mercury) 100 + + + + + + + +Quicksilver (Mercury) Chloride 5 — + + + + +Rezorzin 100 * 0 + + +Sea Water 100 + + + + + + + + +Soap 1 + + + + + + + + + +Sodium Bisulphate 10 + + + + + + + + +Sodium Carbonate 10 + + + + + + + + + + +Sodium Chloride 10 + + + + + + + + +Sodium Sulphate 10 + + + + + + + +Sodium Hydroxide, watery 50 0 + — — + + + + + +Sodium Hydroxide, watery 10 0 + — 0 + + + + + +Styrol 100 + + + +Sulphuric Acid 98 * 0 — — — + + + 0 — —Sulphuric Acid 10 — + 0 0 — + + + + + +Tallow 100 + + + + + +Tetrahydrofuran 100 + 0 + — 0 0 0 — —Tetralin 100 + 0 + — 0 + + + —Thionchlorid 100 * 0 + — 0 — — 0 —Toluene 100 + 0 + — 0 0 0 + — —Trafooil 100 + — + + + + + + + +Trichchloroethylene 100 0 0 + — 0 0 + —Überchlorsäure 10 — + — — 0 0 +Water 100 + + + + + + + + + +Wax 100 + + + + + +Wine - 0 + + + + + + +Xylene 100 + - + — 0 0 0 — —Zinc Chloride 10 0 + + + + + +

Industrial Plastic

PMM

A

ABS

PVC

PTFE

Poly

äthy

len,

hoc

hmol

ekul

arH

DPE

500

Poly

athy

len,

höc

hstm

olek

ular

HD

PE 1

000

Poly

oxim

ethy

len

(Hom

op.)

POM

Poly

carb

onat

PCLin.

Pol

yest

erPE

TP

Poly

prop

ylen

PPPoly

amid

6PA

6

Con

cent

ratio

n%

Chemical Resistance


Industrial Plastic

PMM

A

ABS

PVC

PTFE

Poly

äthy

len,

hoc

hmol

ekul

arH

DPE

500

Polya

thyle

n, h

öchs

tmol

ekul

arH

DPE

100

0

Poly

oxim

ethy

len

(Hom

op.)

POM

Poly

carb

onat

PCLin.

Pol

yest

erPE

TP

Poly

prop

ylen

PPPoly

amid

6PA

6

Konz

entra

tion

%

Chemical Resistance

+ = resistant0 = limited resistant— = changeable* = soluble

Density 2,1DIN 53 479 g/m 1,14 0,91 1,37 1,20 1,43 0,94 0,95 2,3 1,07 1,38 1,18

Yield Stress 80DIN 53 455 N/mm 40 31 74 >60 70 23 39 25 39 48 70(12)

Elongation >50Din 53 455 % >160 >650 >50 >60 >40 450 1000 300 30 30 4,5

E-Modul DIN 53 457 3000(Bend Test) N/mm 1400 1300 3500 2200 3000 350 2300 2500

E-Modul 53 457(Tensile Test) N/mm 2800 1400 500 400 3300

Limiting Bending Stress 130DIN 53 452 N/mm 40 43 125 90 108 27 19 >67 82 120

Impact StrengthDIN 53 453 kJ/m KB KB KB KB >90 KB KB KB KB 11

Notch Impact Strength >3 >10DIN 53 453 kJ/mg KB 8,5 >4 >20 >7 (23) 4(23) 13 14 30 2

Ball Pressure Hardness HDIN 53 456 N/mm 70 63 130 110 145 40 50 32 82 98 190

Time-Yield-Stressbi 1/1000 DIN 53 444 N/mm >5 18 18

Sliding Friction against 0,38 0,35 0,13 0,52 0,34 0,2 0,25 0,07 0,11 0,60Steel at Dry Operation 0,42 0,18 0,58

Moisture Pick-Up % 2,5-3 0,1 0,4 0,2 0,25 0 0 0 0 0 0,3

Dielelectrical Number 3,7 2,4 4,0 3,0 3,6 2,3 2,0 2,4 3,3DIN 53 483 105 Hz 7,0

Dielectrical Dissipation Factor 0,027 3,3.10-4 0,019-14 1x10-4 68x10-4 2x10-4 5x10-14 0,008 0,022 0,03DIN 53 483 105 Hz tan 0,3

Specific Insulation 1014 1018 4x1016 1017 3x1015 1018 1018 1,23x 1016 >1015Resistance DIN 53 482 (xcm 1012 1016

Surface Resistance 5x1012 5x1013 5x1012 1015 1013 1013 5x1013 >1013DIN 53 482 ( 1010

Track Resistance KA3c KA3c KA2 KA1 KA3c KA3c KA3c KA2 KA3b KA3cDIN 53 480 KA3b

Dielectric Strength 50 77 >70 35 49 >50 50 >20 50 30DIN 53 480 KV/mm 20

Cristallit 220 163 255 230 175 130 130 >300 >130 170Temperature °C

Wärmeleitfähigkeit W 0,23 0,19 0,21 0,19 0,20 0,35 0,21 0,15 0,14 0,19DIN 52 612 Kxm

Specific kJ 1,67 1,67 1,05 1,17 1,46 2,30 2,30 1,04 1,08 1,04 1,5Heat Capacity kgx°C

Thermal Length 70-80 180 70-80 60-70 80-90 200 200 60-70 95 80 70Coeffizient of Expansion 10xK

Short Term 160 140 180 175 140 100 120 270 80 80 100Application Temperature °C

Permanent -40 -10 -40 -40 -40 -270 80 -200 -35 -40 70Application Temperature °C 100 100 100 135 100 80 250 58 60

Thermal Form Resistance 95 74 100 60 50 901,8 N/mm DIN 53 461 °C


Conversion Tables - Temperature ConversionComversion Table Centigrade-Fahrenheit Comparison °C-°F

-459.4° through 0° 1° through 60° 61° through 290° 300° through 890° 900° through 3000°C <- F/C -> F C <- F/C -> F C <- F/C -> F C <- F/C -> F C <- F/C -> F

-273 -459 -17,2 1 33,8 16,1 61 141,8 149 300 572 482 900 1652-268 -450 -16,7 2 35,6 16,7 62 143,6 154 310 590 488 910 1670-262 -440 -16,1 3 37,4 17,2 63 145,4 160 320 608 493 920 1688-257 -430 -15,6 4 39,2 17,8 64 147,2 166 330 626 499 930 1706-251 -420 -15,0 5 41,0 18,3 65 149,0 171 340 644 504 940 1724-246 -410 -14,4 6 42,8 18,9 66 150,8 177 350 662 510 950 1742-240 -400 -13,9 7 44,6 19,4 67 152,6 182 360 680 516 960 1760-234 -390 -13,3 8 46,4 20,0 68 154,4 188 370 698 521 970 1778-229 -380 -12,8 9 48,2 20,6 69 156,2 193 380 716 527 980 1796-223 -370 -12,2 10 50,0 21,1 70 158,0 199 390 734 532 990 1814-218 -360 -11,7 11 51,8 21,7 71 159,8 204 400 752 538 1000 1832-212 -350 -11,1 12 53,6 22,2 72 161,6 210 410 770 549 1020 1868-207 -340 -10,6 13 55,4 22,8 73 163,4 216 420 788 560 1040 1904-201 -330 -10,0 14 57,2 23,3 74 165,2 221 430 806 571 1060 1940-196 -320 -9,4 15 59,0 23,9 75 167,0 227 440 824 582 1080 1976-190 -310 -8,9 16 60,8 24,4 76 168,8 232 450 842 593 1100 2012-184 -300 -8,3 17 62,6 25,0 77 170,6 238 460 860 604 1120 2048-179 -290 -7,8 18 64,4 25,6 78 172,4 243 470 878 616 1140 2084-173 -280 -7,2 19 66,2 26,1 79 174,2 249 480 896 627 1160 2120-169 -273 459,4 -6,7 20 68,0 26,7 80 176,0 254 490 914 638 1180 2156-168 -270 -454 -6,1 21 69,8 27,2 81 177,8 260 500 932 649 1200 2192-162 -260 -436 -5,6 22 71,6 27,8 82 179,6 266 510 950 660 1220 2228-157 -250 -418 -5,0 23 73,4 28,3 83 181,4 271 520 968 671 1240 2264-151 -240 -400 -4,4 24 75,2 28,9 84 183,2 277 530 986 682 1260 2300-146 -230 -382 -3,9 25 77,0 29,4 85 185,0 282 540 1004 693 1280 2336-140 -220 -364 -3,3 26 78,8 30,0 86 186,8 288 550 1022 704 1300 2372-134 -210 -346 -2,8 27 80,6 30,6 87 188,6 293 560 1040 732 1350 2462-129 -200 -328 -2,2 28 82,4 31,1 88 190,4 299 570 1058 760 1400 2552-123 -190 -310 -1,7 29 84,2 31,7 89 192,2 304 580 1076 788 1450 2642-118 -180 -292 -1,1 30 86,0 32,2 90 194,0 310 590 1094 816 1500 2732-112 -170 -274 -0,6 31 87,8 32,8 91 195,8 316 600 1112 843 1550 2822-107 -160 -256 0,0 32 89,6 33,3 92 197,6 321 610 1130 871 1600 2912-101 -150 -238 0,6 33 91,4 33,9 93 199,4 327 620 1148 899 1650 3002-96 -140 -220 1,1 34 93,2 34,4 94 201,2 332 630 1166 927 1700 3092-90 -130 -202 1,7 35 95,0 35,0 95 203,0 338 640 1184 954 1750 3182-84 -120 -184 2,2 36 96,8 35,6 96 204,8 343 650 1202 982 1800 3272-79 -110 -166 2,8 37 98,6 36,1 97 206,6 349 660 1220 1010 1850 3362-73 -100 -148 3,3 38 100,4 36,7 98 208,4 354 670 1238 1038 1900 3452-68 -90 -130 3,9 39 102,2 37,2 99 210,2 360 680 1256 1066 1950 3542-62 -80 -112 4,4 40 104,0 37,8 100 212,0 366 690 1274 1093 2000 3632-57 -70 -94 5,0 41 105,8 43,3 110 230 371 700 1292 1121 2050 3722-51 -60 -76 5,6 42 107,6 48,9 120 248 377 710 1310 1149 2100 3812-46 -50 -58 6,1 43 109,4 54,4 130 266 382 720 1328 1177 2150 3902-40 -40 -40 6,7 44 111,2 60,0 140 284 388 730 1346 1204 2200 3992-34 -30 -22 7,2 45 113,0 65,6 150 302 393 740 1364 1232 2250 4082-29 -20 -4 7,8 46 114,8 71,1 160 320 399 750 1382 1260 2300 4172-23 -10 14 8,3 47 116,6 76,7 170 338 404 760 1400 1288 2350 4262

-17,8 0 32 8,9 48 118,4 82,2 180 356 410 770 1418 1316 2400 43529,4 49 120,2 87,8 190 374 416 780 1436 1343 2450 4442

10,0 50 122,0 93,3 200 392 421 790 1454 1371 2500 453210,6 51 123,8 98,9 210 410 427 800 1472 1399 2550 462211,1 52 125,6 100 212 414 432 810 1490 1427 2600 471211,7 53 127,4 104 220 428 438 820 1508 1454 2650 480212,2 54 129,2 110 230 446 443 830 1526 1482 2700 489212,8 55 131,0 116 240 464 449 840 1544 1510 2750 498213,3 56 132,8 121 250 482 454 850 1562 1538 2800 507213,9 57 134,6 127 260 500 460 860 1580 1566 2850 516214,4 58 136,4 132 270 518 466 870 1598 1593 2900 5252

° C = 5/9 (°F -32) 15,0 59 138,2 138 280 536 471 880 1616 1621 2950 5342°F = 32 + 9/5 °C 15,6 60 140,0 143 290 554 477 890 1634 1649 3000 5432

Example for the conversion:1.1000 °F = °C? Find in the table the 2.1000 °C = °F? Find in the table thefigure 1000 in the F/C-column and figure 1000 in the F/C-column andread off the °C-figure on the left read off the °F-figure on the right(= 538 °C) (= 1832 °F)


Outside diameter measuring incl.m/m3 x measuring

measuring/mmm inch (N .B.) mm wall wlth 100 DM/m3

2.020 85,5 0,25 4,08 408,04

1.920 81,5 0,27 3,69 369,64

1.820 77,0 0,30 3,312 331,24

1.720 72,5 0,34 2,96 295,84

1.620 64 68,5 0,38 2,62 262,44

1.520 64,0 0,43 2,31 231,04

1.420 60,0 0,50 2,02 201,64

1.321 52 55,5 0,57 1,75 174,50

1.270 50 53,5 0,62 1,61 161,29

1.219 48 51,5 0,67 1,49 148,60

1.168 46 49,4 0,73 1,36 136,42

1.120 44 47,4 0,80 1,25 125,44

1.067 42 45,1 0,88 1,14 113,85

1.016 40 43,0 0,97 1,03 103,22

965 38 40,8 1,07 0,93 93,12

914 36 38,7 1,20 0,84 83,54

864 34 36,5 1,34 0,75 74,65

813 32 34,4 1,51 0,66 66,10

762 30 32,2 1,72 0,58 58,06

711 28 30,1 1,98 0,51 50,55

660 26 27,9 2,30 0,44 43,56

610 24 25,8 2,69 0,37 37,21

559 22 23,6 3,20 0,31 31,25

521 22,0 3,68 0,27 27,14

508 20 21,5 3,88 0,26 25,81

470 19,9 4,53 0,22 22,09

457,2 18 19,3 4,78 0,21 20,90

419 17,7 5,70 0,176 17,56

406,4 16 17,2 6,05 0,165 16,52

368 15,5 7,38 0,135 13,54

355,6 14 15,0 7,91 0,127 12,65

323,9 12 13,7 9,53 0,105 10,49

318 13,4 9,89 0,101 10,11

298,5 12,6 11,22 0,089 8,91

273 10 11,5 13,42 0,075 7,45

267 11,3 14,03 0,071 7,13

244,5 10,3 16,73 0,06 5,98

219,1 8 9,2 20,83 0,048 4,80

216 9,1 21,43 0,047 4,67

193,7 8,2 26,65 0,038 3,75

177,8 7,5 31,63 0,032 3,16

168,3 6 7,1 35,30 0,028 2,83

165,1 6,9 36,69 0,027 2,73

159 6,7 39,56 0,025 2,53

152,4 6,4 43,06 0,023 2,32

141,3 5 5,9 50,09 0,02 2,00

139,7 5,9 51,24 0,02 1,95

133 5,6 56,53 0,018 1,77

127 5,3 62,00 0,016 1,61

121 5,1 68,30 0,015 1,46

114,3 4 4,8 76,54 0,013 1,31

108 4,5 85,73 0,012 1,17

101,6 3 1/2 4,3 96,88 0,01 1,03

88,9 3 3,7 126,53 0,008 0,79

76,1 3,2 172,68 0,006 0,58

73,0 2 1/2 3,0 187,65 0,53 0,53

70,0 2,9 204,08 0,005 0,49

63,5 2,6 248,00 0,004 0,40

60,3 2 2,5 275,03 0,004 0,36

57,0 2,4 307,79 0,003 0,33

51,0 2,1 384,47 0,003 0,26

Freight Cost Calculation for Tubes - "measuring sizes"


Common Steel, Export and Shipping Terminology

C.C.C.N. Customs Co-operation Council Nomenclature (formerly B.T.N.-Brussels TarifNomenclature)

Demurrage Chages made for delay to vessels or goods after a stated free period

D.N.V. Det Norske Veritas

E.E.C. European Economic Community

E.T.A. Estimated Time of Arrival

E.T.D. Estimated Time of Departure

E.T.S. Estimated Time of Sailing

E.X.W. Ex Works. The consignee ist responsible for all carriage/freight charges, anytaxes, duty handling charges and road transport from the supply source on-wards. The supplier will normally load the materials at this factory, but therehis responsibility ends.

F.O.T. Free On Truck. Supplier load materials free on to vehicle from wence his re-sponsibility ends.

F.A.S. Free Alongside Ship. Includes delivery to airport, depot or docks as part ofthe invoice price to the consignee. Does not include any charges made forunloading the vehicle.

F.O.B. Free On Board. On stage further than F.A.S. The supplier has included in hisinvoice to the consignee the cost of delivery to the airport, depot or docks,handling and documentation charges aboard the carryiong vessel. The con-signee is responsible for all handling, custroms clearance, plus any duty andtaxes on arrival.

F.O.B. LT Free on Board Liner Terms. Applies mainly to Antwerp & Rotterdam ports.Definition as per F.O.B. above, except supplier is responsible for cost formaterials landed on quayside. Price for loading over ship´s rail is usually in-cluded in freight price payable by company arranging delivery to destinationport.

F.I.O. Free In and Out. Charterer of vessel pays for cost of loading and dischar-ging cargo.

F.C.R. Forwarder Certificate of Receipt.

G.F.N. Gross for Net. Gross weight to be charged which may include packing usedto protect and bundle materials.

L/C* Letter of Credit.

L.R.S. Lloyds Register of Shipping

M.R. Mate´s Receipt

M/V Morot Vessel

N.S.S.N. National Standard Shipping Note

Proforma A Specimen document, usually an invoice, presented to client for approvalprior to official order placement and payment of goods.

S.A.D. Single Administrative Document (for customs)

Without Engangement No liability to accept an offer at the price quoted if prices go against the sel-

ler in the meantime.

*Please ensure Letters of Credit always show thalt Bills of Lading will be accepted if classesrelating to ruststaining/oxidation of materials are shown.

H.R. Hot RolledC.R. Cold Rolles or Cold ReducedP & O Pickled & OiledH.D. Hot Dipped (Galvanized)

C CarbonSi SiliconMn ManganeseP PhosphorS SulphurCr ChromiumMo MolybdenumNi Nickel

T.S. Tensile Strength or StressY.S. Yield Strength or StressEl ElongationN/mm Newton per square millimetreKgs Kilogrammes (1000 kgs=1tonne)Tonne 1000 KilogrammesCu Mtr Cubic Metremm Millimetrescm Centimetres

Dia DiameterI.D. Inside DiameterO.D. Outside Diameter

P.E. Plain EndsS & S Screwed / SockettedSTD StandardHFS Hot Finished SeamlessERW Electric Resistance Welded

AISI American Iron and Steel InstituteAWB Air WaybillABS American Bureau of ShippingAPI American Petroleum InstituteASTM American Society for Testing of MaterialsAt Sight Pabable on demand without any days of grace unless previously agreed

B/L* Bill of LadingBSS British Standard SpecificationBlankEndorsement Signature on the back of the Bill of Exchange of B/L without any qualification

CAD Cash Against Documents. Paid to supplier by bankor directly by purchaserprior to receipt of said documents (if in order) by purchaser.

C.O. Certificate of Origin

C.I.F. Cost, Insurance and Freight. This means supplier will pay for insurance rela-ted to the invoice value of the goods, plus freight handling and documentati-on charges up to arrival at airport, depot or docks. The consignee is respon-sible for all handling, customs clearance, plus any duty and taxes on arrival.

CFR The same as C.I.F. but excluding insurance cover

C.R.N. Customs Registered Number


Conversion Tables - Linear/Square/Cubic measures andWeights

Linear measures1 mm = 0.039370 in. 1 inch = 25,400 mm1 cm = 0.393701 in. 1 inch = 2,540 cm1 m = 3.280840 ft. 1 foot = 12 inches = 0,3048 m1 kg = 0.6214 English mile 1 Yard = 3 feet = 914,4 mm

1 English mile = 1.60930km

Square measures1 mm2 = 0.001550 square inch 1 square inch = 645,160 mm2

1 cm 2 = 0.155000 square inch 1 square inch = 6,541600 cm2

1 m2 = 10.763911 square feet 1 square foot = 144 square inches = 0,092903 m2

Cubic measures1 cm3 = 0.061024 cubic inch 1 cubic inch = 16,387064 cm3

1 dm3 = 0.035315 cubic inch 1 cubic foot = 1728 cubic inches = 28,316847 dm3

1 m3 = 35.314670 cubic feet 1 cubic foot = 0,028317 m3

Weights1 g = 0.035274 ounce 1 ounce = 28,3495 g1 kg = 2.204622 pounds (lb) 1 pound (lb) = 16 ounces = 0,453592 kg1 metric ton = 0.984206 long ton 1 long ton = 2240 lb = 1016,04706 kg

= 1.10231 short ton 1 short ton = 2000 lb = 907,185 kg

Weights per linear, square or cubic unit measure1 kg/cm = 5.599741 lb./in. 1 lb./in. = 0,178580 kg/cm1 kg/m = 0.671969 lb./foot 1 lb./foot = 1,488164 kg/m1 kp/mm2 = 1422.336968 lb./sq. in. 1 lb./sq. in. = 0,000703 kg/mm2

1 kp/cm2 = 14.223370 lb./sq. in. 1 lb./sq. in. = 0,070307 kg/cm2

1 kp/m2 = 0.204816 lb./sq. ft. 1 lb./sq. ft. = 4,882430 kg/m2

1 kp/cm = 36.127135 lb./cu. in. 1 oz./sq. ft. = 305,15 p/m2

1 kp/m3 = 0.062428 lb./cu. ft 1 long ton/sq.in. = 1,575 kp/mm2

1 lb./cu. in. = 0,027680 kp/cm3

1 lb./cu. ft. = 16,018464 kp/m3

1 kp/mm2 = 9.80665 N/mm2 1 N/mm2 = 0,101972 kp/mm2

1 kmp = 9,80665 J 1 J = 0,101972 kpm1 kpm = 7,233 ft.-lbs. 1 ft.-lb. = 0,138254 kpm1 J = 0,7376 ft.-lbs. 1 ft.-lb. = 1,355748 J


Notes


OOrrddeerr FFoorrmm

Ple

ase

se

nd m

e th

e fo

llow

ing

che

cke

d it

em

s a

s so

on

as

po

ssib

le:

Ca

talo

gue

s:

�Tu

be

& P

ipe

Siz

es

- D

ata

bo

ok

4th

ed

itio

n�

Sto

ck-

hea

t e

xcha

nge

r- a

nd c

ond

ens

er t

ube

s�

Sea

mle

ss T

ube

s, s

tain

less

ste

el,

nic

kel a

lloys

, tita

nium

and

tita

nium

allo

ys�

Sea

mle

ss a

nd w

eld

ed

sta

inle

ss s

tee

l tub

es

and

pip

es

- g

ene

ral i

nfo

rma

tion

�Te

cha

lloy;

Nic

kel a

nd s

pe

cia

l gra

de

s�

Sea

mle

ss a

nd w

eld

ed

tita

nium

tub

es

�N

on

Ferro

us h

ea

t e

xcha

nge

r & c

ond

ens

er t

ube

s�

Exte

nde

d s

urfa

ce

tub

es

- Fi

n tu

be

s�

Tec

hnise

al -

OC

TG -

Pre

miu

m c

oup

ling

co

nne

ctio

ns f

or t

ubin

g a

nd c

asin

g�

Hyd

raul

ic a

nd In

stru

me

nta

tion

Tub

ing

TPS-

Tech

nitu

be R

öhre

nwer

ke G

mbH

P.O

. Box

509

D -

5454

1 D

aun

F.R. G

erm

any

Ple

ase

use

thi

s fo

rm t

o m

ail

or f

ax

(Fa

x (4

9) 6

592/

1305

)th

e o

rde

r fo

r yo

ur p

ers

ona

l se

t o

f c

ata

log

ues

now

!O

ptio

nally

yo

u m

ay

e-m

ail

us (

serv

ice

@TP

S-Te

chn

itub

e.d

e)

or u

se t

he „

Req

uest

fo

r Ca

talo

gue

s“ b

utto

n o

no

ur w

eb

site

:ww

w.T

PS-T

ec

hnitu

be

.de

✃

OOrrddeerr FFoorrmm


�M

ultis

ea

l - T

wo

ste

p p

rem

ium

inte

gra

l tub

ing

co

nne

ctio

ns�

Mul

tise

al -

Flu

sh J

oin

t -

Two

ste

p p

rem

ium

flu

sh jo

int

co

nne

ctio

ns�

Op

tiflo

w C

onn

ec

tions

- H

igh

Perf

orm

anc

e T

ubin

g a

nd C

asin

g C

oup

ling

Co

nne

ctio

ns�

API

Co

nne

ctio

ns�

OC

TG-G

rad

es

and

Siz

es

�A

PI D

rill P

ipe

�. .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. .

Oth

er m

ed

ia:

�TP

S C

D-R

om

�

TPS

Mo

vie

Pro

duc

tion

�Pr

eq

ualif

ica

tion

list

My

ad

dre

ss:

Na

me

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

Stre

et

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

Post

Co

de

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

City

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

Co

untr

y .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. .

Co

nta

ct

pe

rso

n .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. . .

. .Fa

x (4

9) 6

592/

1305

• E

-Ma

il: s

erv

ice

@TP

S-Te

chn

itub

e.d

eW

eb

Site

: ww

w.T

PS-T

ec

hnitu

be

.de

✃


Notes

Notes


Tube & Pipe SizesThe unique Databook containing comprehensive information andComparison Tables on Sizes, weights and general data of Pipes, Tubes,Fittings, Flanges, Bars, Sheet & Strip, Hollow Sections and related products according to main International Standards.

4TH NEW EDITION



Other TPS product catalogues• Seamless and welded stainless steel tubes and pipes -

general information

• Techalloy; Nickel and special grades

• Seamless and welded titanium tubes

• Stock- heat exchanger- and condenser tubes

• Non-Ferrous heat exchanger &

condenser tubes

• Extended surface tubes - Fin tubes

• Techniseal - OCTG - Premium coupling connections

for tubing and casing

• Multiseal - Two step premium integral tubing

connections

• Multiseal - Flush Joint - Two step premium flush joint

connections

• Optiflow Connections - High Performance Tubing

and Casing Coupling Connections

• API Connections

• Drill Pipe

• OCTG - Grades and Sizes

• Fittings, Flanges and Forgings in special Grades for

Piping Systems

• Tube & Pipe Sizes - Databook 3rd edition

• Catalogues on CD-ROM available

TPS

Tech

nitu

be ·

Tube

& P

ipe

Size

s

• T

PS T

echn

itube

· Tu

be &

Pip

e Si

zes

TP

S T

&P

339_

00

Date post:	02-Oct-2014
Category:	Documents
Upload:	ramirezisaac6843
View:	800 times
Download:	13 times