+ All Categories
Home > Documents > manual_at1500cv

manual_at1500cv

Date post: 08-Apr-2018
Category:
Upload: henry-miller
View: 215 times
Download: 0 times
Share this document with a friend

of 8

Transcript
  • 8/7/2019 manual_at1500cv

    1/8

    Palstar Incorporated9676 N. Looney Rd.,

    Piqua, OH 45356 USACustomer Service and Sales Telephone:

    1-800-773-7931Fax:

    1-937-773-8003Email:

    [email protected]

    Copyright 2005 Palstar Inc.Printed in the U.S.A.

    AT1500CV 1500 Watt Antenna Tuner

    Owners Manual

  • 8/7/2019 manual_at1500cv

    2/8

  • 8/7/2019 manual_at1500cv

    3/8

  • 8/7/2019 manual_at1500cv

    4/8

    4 Table of Contents

    1-800-773-7931 WWW.PALSTAR.COM

    Important safeguards 2

    Table of Contents 4

    General Description 5

    Specifications 6

    Installation 7

    Unpacking 7Location 7

    Installation Procedures 7AT1500CV Schematic 8Rear Panel Connections 10

    Front Panel Description 11

    Operating Your AT1500CV 12

    Before Operating 12

    Tuning 12Notes 14

    Service and Warranty 15

    Thank you for purchasing aPalstar AT1500CV Antenna

    Tuner. This antenna tuner hasbeen designed and manufac-tured to high quality standards,and will provide reliable opera-tion for many years.

    Please carefully read theOwners Manual in order to take

    advantage of the many interest-ing features that will provideyears of enjoyable amateur radio operation.

    Operating Your AT1500CV contd 13

    1-800-773-7931 WWW.PALSTAR.COM

    7. Rotate the INPUT, ANTENNA andINDUCTOR controls for maximumnoise or signal as heard on your re-ceiver. Refer to preset tuning chart onpage 12.8. Key your transmitter and adjust thepower level for a reading of 50-100watts on the FORWARD scale. Adjustthe INPUT, OUTPUT and INDUC-TOR controls for a minimum RE-FLECTED reading while maintaining a

    FORWARD reading of 50-100 wattsusing your transmitter power control.9. Read the SWR on the red scale atthe point where the two needles inter-sect. Repeat TUNING the input andantenna controls until the lowest SWRreading is obtained. The SWR shouldbe 2:1 or lower.

    This procedure takes patience the

    first time. The input and antennacontrols vary the capacitors and provide fine adjustments. The roller inductor crank control providescoarse adjustment.

    10. When you have tuned your an-tenna to the best SWR, record thesettings of the INPUT, ANTENNA andINDUCTANCE controls on the chartabove for future reference. When youretune, use these settings as yourstarting point.

  • 8/7/2019 manual_at1500cv

    5/8

  • 8/7/2019 manual_at1500cv

    6/8

  • 8/7/2019 manual_at1500cv

    7/8

  • 8/7/2019 manual_at1500cv

    8/8

    8 AT1500CV Schematic

    1-800-773-7931 WWW.PALSTAR.COM

    315pf

    26uH

    AT1500CV Schematic 9

    1-800-773-7931 WWW.PALSTAR.COM

    315pf