+ All Categories
Home > Documents > MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview...

MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview...

Date post: 21-Jul-2020
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
80
CI/SfB (68.5) x17 (k2) PRODUCT GUIDE 16.0 ASTROFLAME MANUFACTURERS OF PASSIVE FIRE STOP PRODUCTS
Transcript
Page 1: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

CI/SfB

(68.5) x17 (k2)PR

ODUC

T GU

IDE 16

.0

ASTROFLAMEM A N U F A C T U R E R S O F PA S S I V E F I R E S T O P P R O D U C T S

Page 2: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

2

We offer a comprehensive range of intumescentpassive fire stopping products for use in walls, floors, ceilings, doors, ducts and other fire ratedcompartmentation structures. Fire testing has beencarried out by Certifire, Warrington Fire Research,Chiltern Fire, BRE, Loss Prevention Council and NHBCType Approval. Products are available ex-stock in over 50 countries worldwide, with overnight AM delivery as standard in the UK and fast despatch by road, sea or air for worldwide destinations.

Our in-house design and test facility offers a fastdowntime on new product innovations from concept to completion, we will be pleased to discuss yourconstruction product needs. New products are added to our range all the time - to keep up to date, bookmarkour website www.astroflame.com

The entire Astro Group has undergone an extensivequality and reliability programme to ISO9001:2008approved.

We are manufacturers of passive fire stop products, draught and weathersealing systems for the constructionindustry.

This brochure covers our complete range of products including:

Door Protection, Finger Protection, SafetyCushioning, Fire Stop Products, LightingProtection, Mastics & Foams, Fire Proof Paints, Anti Graffiti Paints, Draught Proofing,Acoustic Seals & Disabled Access.

www.astroflame.com www.astrodraft.com

For the most up-to-date product information and specification details on the complete Astroflame Group range please visit our websites.

Page 3: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

3

> Door ProtectionAstro Quad Seal 04Intumescent Fire Seals 05Intumescent Door Edge Guards 08Ironmongery Protection 09Intumescent Telescopic Letterbox 30 min 09Intumescent Acoustic Telescopic Letterbox 30/60 min 10Intumescent Letterbox Liners 11Intumescent Telescopic Letterbox 60 min 12Fire Rated Door Viewer 13Fire Rated High Security Door Viewer 13Intumescent Fire Grille 14Air Transfer Face Plates 15Intumescent Glazing U-Channel 16Intumescent Glazing Tape 16Acoustic & Smoke Perimeter Seals 17Acoustic Double Door Seals 18Acoustic Double Door Seals Rebate Fit 18Acoustic & Smoke Meeting Style 19Acoustic & Smoke Rated Door Bottom Seals - R 20Acoustic & Smoke Rated Door Bottom Seal - SM 21Perimeter Smoke Seal 22Door Bottom Smoke Seal 22Threshold Smoke Seal 23

> Finger ProtectionFingerkeeper Commercial Front andFingerkeeper Commercial Rear Guard 24Transparent Finger Guard for Doors 25 Finger Saver Pvc Front Guard 26Slim Rear Pvc Finger Guard 26Finger Guard for Centre Pivot or Butt Hinged Doors 27Heavy Duty Hinge Guard 28DigiSaver Aluminium Finger Guard 28Finger Defender 29Finger Protecta 30Finger Defender - Glass Door 31Finger Defender External 32Anti-finger trapping device for Rear of Door 32

> Safety CushioningCorner Guard Safety Strip 33Reflective Safety Padding Strip 34 Transparent Corner Guard Safety Strip 34

> Firestop ProductsIntumescent Pipe Collars 35Intumescent Pipe Wraps 36Thermal Fire Pipe Sleeve 37Thermal Defense Wrap 38Intumescent Fire Pillows 39Fire Pillows X-series 39Fire Stop Block 40Fire Rated Ceiling Air Valves 41Fire Rated Vent Sleeve 42Intumescent Duct Sleeve 42Intumescent Duct Wrap 43 Intumescent Fire Trunking Sleeve 43Intumescent Cable Tray Sleeve 44 Intumescent Fire & Acoustic Internal Socket Box Insert 44

Intumescent Fire & Acoustic Socket Box Cover 45Intumescent Fire & Acoustic Cable Basket Sleeve 45Fire Rated Cladding Seals 46Cavity Fire Barrier Roll 48Ventilated Fire Barrier Kit 48 Intumescent Expansion Joint Seals 49Fire Resistant Flexible Board 50Fire Resistant Flexible Coating 50Fire Resistant Mortar 51Intumescent Putty 51Fire Resistant Batt 52Fire Resistant Sealant Coat 52

> Lighting ProtectionFire Rated Loft Cone 53Luminaire Cover 53Intumescent Acoustic Rated Downlighter Cover 54Fire Rated Luminaire Canopy 54

>Mastics & FoamsIntumescent Acoustic Mastic 55High Pressure Expansion Sealant 56Low Smoke & Toxicity Intumescent Mastic Sealant 56Fire Rated Silicone Sealant 57 Fire Rated Acoustic Foam 57

> Fire Proof PaintsIntumescent Paint For Timber 58Intumescent Paint For Walls & Ceilings 58Flame Retardant Paint 58Intumescent Fire Varnish 59Intumescent Paint For Steel & Cast Iron 59High Build Primer

>Anti Graffiti PaintsAnti-Graffiti Paint 60Non Darkening Sealer Coat 60Anti Fly Poster Paint 61Mastersolve Grease Remover 62Non Slip Floor Paint 62

> Draught ProofingSash Window & Patio Door Seals 63 Door & Glazing Seals 64Door Bottom Seals 65Acoustic Audio Perimeter Door Seal 66 Under Door Draught Excluder 66Schlegel AQUAMAC 67

>Acoustic Seals & Disabled AccessRaven Acoustic Door Bottom Seals 69 Raven Door Frame or Perimeter Seals 72Raven Astragal/Meeting Stile Seals 73Raven Glass Door Seals 74Raven Threshold Plates 75Raven Disabled Access Ramp 76Raven Brush Strip Seals 77Raven Magnetic Seals 78Raven Self Adhesive Seals 79

Contents

Page 4: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

4

INTUMESCENT FIRE, SMOKE ACOUSTIC & THERMAL SEAL

> Trade Name ASTRO QUAD SEAL

> Product DescriptionTHE ASTRO QUAD SEAL SYSTEMIntumescent Fire, smoke, acoustic &thermal seals for fire door assembliesFour Seals in One! The complete solutionfor fire, smoke, acoustic & thermalcontainment. Quad Seal is an Astroflameintumescent (graphite based) fire sealcombined with a Schlegel Aquamacsmoke, acoustic & thermal seal containedwithin a PVC sleeve that is fitted into arebate to either the fire door leaves orframe.

In the event of a fire, the fire sealexpands (intumesces) to many times its original volume and seal the gaparound the door to provide a safe andeffective barrier against the passage offire, smoke and hot gases.

Fire, smoke, acoustic & draught sealQuadseal is 4 Seals in 1BS476 Part 22 & 31.1BS EN ISO 140-330 or 60 minute rated typesSmoke Seal to 100,000 cycle testMeets Approved Document BMeets Approved Document EMeets Approved Document L5 Popular sizesNHBC Type ApprovalCERTIFIRE Approval

Astroflame Quad Seal provides apermanent barrier to Fire, smoke,acoustic, and thermal applications.

Astro Quad seal is the only product onthe market to offer Four solutions in one seal, Fire & Smoke to meetDocument B combined together with a low friction Acoustic & Thermal seal tosatisfy Document E and Document L.

All Astro Quad seals are supplied with aself adhesive backing tape as standardto facilitate quick and easy fitting. Theseals are available in a choice of coloursto suit your requirements or blend withdecor.

> Quick Overview

> Available ColoursWhite Pvc Casing & White Aquamac SealBrown Pvc Casing & Brown Aquamac Seal Black Pvc Casing & Black Aquamac Seal

Other Pvc Casing colours available:Red Cream Grey Light Brown Blue Teak Beech Beige Yellow

PRODUCT REF SIZE COLOURAF1004QBLK 10mm BlackAF1004QBRN 10mm BrownAF1004QWHT 10mm WhiteAF1504QBLK 15mm BlackAF1504QBRN 15mm BrownAF1504QWHT 15mm WhiteAF2004QBLK 20mm BlackAF2004QBRN 20mm BrownAF2004QWHT 20mm WhiteAF2504QBLK 25mm BlackAF2504QBRN 25mm BrownAF2504QWHT 25mm WhiteAF3004QBLK 30mm BlackAF3004QBRN 30mm BrownAF3004QWHT 30mm White

> Availability

> How to order this product

FOR EXAMPLE100NO/ASTRO QUAD SEAL/WHITE/10MM/AF1004QWHT

PLEASE QUOTEQUANTITY/TRADE NAME/COLOUR/SIZE/PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

ACOUSTICRATED

Lengths: 2100mm, 1050mm or Single Door Packs (2 x 2.1m + 1 x 1.05m)

Page 5: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

5

INTUMESCENT FIRE SEALS> Trade Name ASTRO STRIP

> Product DescriptionIntumescent fire and smoke seals for fire door assemblies. An intumescentgraphite based fireseal contained withina PVC sleeve for fitting into a rebate toeither the leaves or the frame of a door.In the event of a fire the seal expands(intumesces) to many times its originalvolume and seals the gap around thedoor to provide a safe and effectivebarrier against the passage of fire,smoke and hot gases.

Astroflame Intumescent Fireseals areavailable with or without a cold smokeseal in the form of a nylon pile.Astroflame smoke seals provide apermanent barrier to smoke - particularlyimportant as smoke fumes travel fasterand further than the fire itself. They alsohave acoustic and thermal applications.

Passed at BS476 Part 22 & 31.1Smoke Seals to EN1634-330 or 60 minute rated typesAvailable in 12 Colours All seals available in a pre-packcontaining 2x2.1M and 1x1.05m lengthscomplete with fitting instructions.All seals are supplied withself-adhesive backing tape.Alternative Smoke Seal fittings: Grey 6mm Nylon pile to Black or White.Longer length - Grey Nylon pile. 7mm,9mm or 11mm.Alternative seals: Black NeopreneRubber draught seals in single or twin blade.NHBC Type ApprovalCertifire Approval

All ASTRO fire and smoke seals aresupplied with a self-adhesive backingtape as standard to facilitate quick andeasy fitting. Tested for 30 minutes with10mm and 15mm to BS 476 part 22 &31.1. Tested for 60 minutes with 20mm25mm and 30mm to BS 476 part 22 &31.1. Smoke seals tested to EN1634-3 Tested to 100,000 open/close cycles.NHBC Type Approval.

Fire and smoke seals are available in a choice of 12 colours to suit yourrequirements or blend with decor.To seal the bottom of the door wesuggest using our Surface MountedAcoustic & Smoke Perimeter Seals orRebate Fit Acoustic & Smoke PerimeterSeals.

> Quick Overview

All seals are also available in a pre-packsingle door set containing 2x 2.1M & 1x1.05M lengths complete with fixinginstructions.Single Fire Door Pack 2x2.1m + 1x 1.05m. Packs add /SELDRPK to product code.

> Packing details for all types10mm seals 2100mm 50 lengths per pack15mm seals 2100mm 25 lengths per pack20mm seals 2100mm 25 lengths per pack25mm seals 2100mm 25 lengths per pack30mm seals 2100mm 25 lengths per pack

> How to order this productOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Colours: Brown (B), White(W), Red(R), Black(BLK), Cream(C), Grey(G), Light Brown(LB), Blue(BLU), Teak(TK), Beech(BEE), Beige(BEI) & Yellow (YEL)

Page 6: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

6

INTUMESCENT STRIP - FIRE & SMOKE> Trade Name ASTRO STRIP FS - FIRE & SMOKE

> Product DescriptionIntumescent fire and smoke seals for asafe and effective barrier against fire,cold smoke and hot gases. Brush coloursavailable: Grey, Black or White.

PRODUCT REF FIRE RATING PROFILE SIZE LENGTHSAF1004 FS 30 mins 10mm x 4mm 2.1m/1.05mAF1504 FS 30 mins 15mm x 4mm 2.1m/1.05mAF2004 FS 60 mins 20mm x 4mm 2.1m/1.05mAF2504 FS 60 mins 25mm x 4mm 2.1m/1.05mAF3004 FS 60 mins 30mm x 4mm 2.1m/1.05m

> Availability

> How to order this product

FOR EXAMPLE50NO/ASTROSTRIPFS/AFI504FS/BROWN/2.1M

PLEASE QUOTEQUANTITY/TRADE NAME/PRODUCT REF/PVC COLOUR/LENGTH

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

INTUMESCENT STRIP - FIRE ONLY> Trade Name ASTRO STRIP FO - FIRE ONLY

> Product DescriptionIntumescent seals for use where nosmoke sealing is required.

PRODUCT REF TYPE FIRE RATING PROFILE SIZE LENGTHSAF1004 FO Fire Only 30 mins 10mm x 4mm 2.1m/1.05mAF1504 FO Fire Only 30 mins 15mm x 4mm 2.1m/1.05mAF2004 FO Fire Only 60 mins 20mm x 4mm 2.1m/1.05mAF2504 FO Fire Only 60 mins 25mm x 4mm 2.1m/1.05mAF3004 FO Fire Only 60 mins 30mm x 4mm 2.1m/1.05m

> Availability

> How to order this product

FOR EXAMPLE50NO/ASTROSTRIPFO/AFI504FO/BROWN/2.1M

PLEASE QUOTEQUANTITY/TRADE NAME/PRODUCT REF/PVC COLOUR/LENGTH

Page 7: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

7

INTUMESCENT SEALS FIRE & SMOKE SINGLE BLADE SEAL

> Trade Name ASTRO STRIP SB FIRE & SMOKE WITH SINGLE RUBBER SEAL

> Product DescriptionIntumescent fire seal with a blackNeoprene single blade smoke seal.

> How to order this product

FOR EXAMPLE25NO./ ASTROSTRIP SB/AF1004 SB/RED/2.1M

PLEASE QUOTEQUANTITY/TRADE NAME/PRODUCT REF/COLOUR/LENGTH

PRODUCT REF FIRE RATING PROFILE SIZE LENGTHSAF1004 SB 30 mins 10mm x 4mm 2.1m/1.05mAF1504 SB 30 mins 15mm x 4mm 2.1m/1.05mAF2004 SB 60 mins 20mm x 4mm 2.1m/1.05mAF2504 SB 60 mins 25mm x 4mm 2.1m/1.05mAF3004 SB 60 mins 30mm x 4mm 2.1m/1.05m

> Availability

INTUMESCENT SEALS FIRE & SMOKE TWIN BLADE SEAL> Product DescriptionIntumescent fire seal with a blackNeoprene twin blade smoke seal.

> How to order this product

FOR EXAMPLE75NO./ ASTROSTRIP TB/AF1004 TB/CREAM/2.1M

PLEASE QUOTEQUANTITY/TRADE NAME/PRODUCT REF/COLOUR/LENGTH

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

PRODUCT REF FIRE RATING PROFILE SIZE LENGTHSAF1004 TB 30 mins 10mm x 4mm 2.1m/1.05mAF1504 TB 30 mins 15mm x 4mm 2.1m/1.05mAF2004 TB 60 mins 20mm x 4mm 2.1m/1.05mAF2504 TB 60 mins 25mm x 4mm 2.1m/1.05mAF3004 TB 60 mins 30mm x 4mm 2.1m/1.05m

> Availability

> Trade Name ASTRO STRIP TB FIRE & SMOKE WITH TWIN RUBBER SEAL

Page 8: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

8

INTUMESCENT DOOR EDGE GUARDS> Trade Name ASTRO ALUMINIUM DOOR EDGE GUARD : ASTRO PVC DOOR EDGE GUARD

> Product DescriptionDoors in hospitals suffer more than mostfrom wear and tear resulting from hightraffic levels and impact damage yet anydoor in a commercial or industrialbuilding is likely to suffer from this lossof integrity.

With constant trolley and wheelchairtraffic it is the leading edge of the doorthat suffers most from ‘porter damage’which not only results in general damageto the door but also possible loss of thefire integrity of the door.

Astroflame have overcome this problemwith their range of Fire rated Door Edge

Aluminium or PVC Colours to matchdécor and comply with DDAFire & Smoke tested up to 1/2 or 1 hourto BS 476 part 22 & 31.1Eliminate the need for repetitivemaintenance.Impact protection for both single &double fire doorsSuits new & existing fire doorsAvailable with a flat or round edgeAvailable in various widths to suit anydoor edgeNew build or refurbishmentIdeal for use in Healthcare, Retail,Schools and Commercial/Public areas

Guards which are available in varioussizes from 44– 65mm width and lengthsup to 2.5m with longer lengths availablefor non-standard doors.

Door Edge Guards contain intumescent & smoke seals and have been fully firetested up to 1/2 or 1 hours and eliminatethe need for repetitive maintenance.

Available in aluminium or PVC Colours up to 2.5m long & Widely specifiedthroughout the UK healthcare market.Converts leaf stile doors to swing stilesImpact tested to 200kg at 3.5 m.p.h and 50kg at 7m.p.h.

> Quick Overview

> How to order this product

FOR EXAMPLE10 /ASTRO ALUMINIUM ROUNDED DOOR EDGE GUARD/44MM/SAA/AFDEGR44SAA

PLEASE QUOTEQUANTITY/TRADE NAME/SIZE/COLOUR/PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

DESCRIPTION COLOUR RATING SIZE PRODUCT REFRounded Door Edge Guard SAA 30 min 44mm AFDEGR / 44SAARounded Door Edge Guard RAL 30 min 44mm AFDEGR / 44RALRounded Door Edge Guard SAA 30 min 46mm AFDEGR / 46SAARounded Door Edge Guard RAL 30 min 46mm AFDEGR / 46RALRounded Door Edge Guard SAA 60 min 55mm AFDEGR / 55SAARounded Door Edge Guard RAL 60 min 55mm AFDEGR / 55RALRounded Door Edge Guard SAA 60 min 63mm AFDEGR / 63SAARounded Door Edge Guard RAL 60 min 63mm AFDEGR / 63RALFlat Door Edge Guard SAA 30 min 44mm AFDEGF / 44SAAFlat Door Edge Guard RAL 30 min 44mm AFDEGF / 44RALFlat Door Edge Guard SAA 30 min 46mm AFDEGF / 46SAAFlat Door Edge Guard RAL 30 min 46mm AFDEGF / 46RALFlat Door Edge Guard SAA 60 min 55mm AFDEGF / 55SAAFlat Door Edge Guard RAL 60 min 55mm AFDEGF / 55RAL

> AvailabilityLengths:Standard length 2100mm - Longer lengths to order up to 3000mm

Page 9: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

9

IRONMONGERY PROTECTION> Trade Name ASTRO PROTECTA

> Product DescriptionTested to BS476: Part 22 for up to 60minute fire rating and EN1634-1 30 minuterating. Upgrade weak points. Choice ofwidths. Maintenance Free NHBC TypeApproval.

Tested to BS476-60 minTested to EN1634-1 30 minNHBC Type Approval

A graphite based intumescent materialavailable in various widths which can beeasily cut to be fitted behind hinges,door closers and strike plates etc.

> Quick Overview

> Availability

ASTRO PROTECTA PACK (to suit single Fire Door) 3No 36 x 300 x 2mm - Hinge Strip 1No 500 x 500 x 0.8mm Lock/Door Closer Protection - AFPTECASTRO HINGE PACK - 6No 36 x 300 x 2mm - Hinge Strip - AFHS36ASTRO LOCK/DOOR CLOSER PACK - 1No 500 x 500 x 0.8mm - Lock Sheet - AFLSASTRO INTUMESCENT SHEET - 550mm x 1050mm x 1, 2, 3, 4 or 5mm - AFINS105

INTUMESCENT FIRE RATED TELESCOPIC LETTERBOX SYSTEM

> Trade Name ASTRO ECO TELESCOPIC LETTER BOX FX (FIRE & SMOKE)

> Product DescriptionThe Astroflame telescopic letterbox systemrange is specifically designed to increase thesafety and security of occupants against fireand is particularly suited to multipleoccupancy residential buildings. The Astro EcoTelescopic Letterbox is a stylish, ABS framed,telescopic letterbox with metal flaps fittedwith a high performance intumescent lineraround the telescopic sleeve section. Theletterbox flaps open to 180° and the adjustabletelescopic sleeve can be set to suit 40mm -80mm door thickness. Acoustic and thermalperformance features include brush piledraught excluders, integral sound dampeningbumpers and a fully sealed backplate.

30 minute fire rated letterboxessuitable for FD30/FD30S fire doors.Telescopic fitting - adjustable to fitdoors 40mm-80mm thicknessWide range of letter plate finishes.10" Standard or 12" Commercial sizes.High performance intumescent linerTested to BS 476 part 22: 1987, 30minute rated.Tested to BS 476 Part 31/1: 1983Acoustic tested achieving Rw32dB Tested to BS EN 13724 Clause 6.6.5(Compliant within Scope of PAS 23 & 24)

During a fire the intumescent liner rapidlyexpands and seals off the letterbox opening,preventing the spread of fire and smokewhilst maintaining the integrity of the firedoor assembly. Available in 10” Standard(272mm x 70mm) and 12” Commercial(306mm x 70mm) sizes. Cut out required is241mm x 57mm for standard size letterboxand 274mm x 57mm for commercial sizeletterbox. Adjustable to suit door thicknessfrom 40mm – 80mm and tested for use upto 1050mm from floor level. Both 10" and 12"sizes have a black ABS frame and are availablewith Satin Aluminium, Chrome Plated,Stainless Steel, Polished Silver or PolishedGold letter plate flaps.

> Quick Overview

PRODUCT REF DESCRIPTION DIMENSIONS COLOURAFTLBFX/30SAA 30 Minute Fire / Smoke 272 x 70mm Satin Anodised AluminiumAFTLBFX/30PC 30 Minute Fire / Smoke 272 x 70mm Chrome PlatedAFTLBFX/30SS 30 Minute Fire / Smoke 272 x 70mm Stainless SteelAFTLBFX/30PA 30 Minute Fire / Smoke 272 x 70mm Polished Silver (CC)AFTLBFX/30GA 30 Minute Fire / Smoke 272 x 70mm Polished Gold (CB)AFTLBFXC/30SAA 30 Minute Fire / Smoke 306 x 70mm Satin Anodised AluminiumAFTLBFXC/30PC 30 Minute Fire / Smoke 306 x 70mm Chrome PlatedAFTLBFXC/30SS 30 Minute Fire / Smoke 306 x 70mm Stainless SteelAFTLBFXC/30PA 30 Minute Fire / Smoke 306 x 70mm Polished Silver (CC)AFTLBFXC/30GA 30 Minute Fire / Smoke 306 x 70mm Polished Gold (CB)

> Availability

> How to order this product

FOR EXAMPLE12NO / ASTRO ECO TELESCOPIC LETTER BOX FX / AFTLBFX/30SAA / 30 MINS / SAA

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / RATING / COLOUR

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 10: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

10

INTUMESCENT FIRE RATED TELESCOPIC LETTERBOX SYSTEM

> Trade Name ASTRO TELESCOPIC LETTER BOX FS (FIRE/SMOKE) ASTRO TELESCOPIC LETTER BOX FSA (FIRE/SMOKE/ACOUSTIC) ACOUSTIC

RATED

> Product DescriptionThe Astroflame telescopic letter boxsystem range is specially designed toincrease the safety, comfort and securityof occupants against Fire, Smoke andNoise Pollution.

The range includes models which areeither fire & smoke rated from 30minutes to 1 hour particularly suitable formultiple occupancy residential buildings.Our Astro telescopic letter box FSA alsocarries an Acoustic rating to 29db/Rwsound reduction criteria as outlined inApproved Document E for door sets.Tested to BS EN SO 140 it achievedbetter results than the standardised fully caulked benchmark test. 30 minute

Tested to BS 476 PART 22 for 30 or 60 minutes fire ratingTested to BS EN 20140-10Tested to BS EN ISO140 - Rw29dBacoustic ratingAdjustable door thickness from 42-47mm, 47-52mm & 52-57mmSupplied complete with internal flapand aperture linerFire, Smoke & Acoustic in one systemCertifire Approval

version available in satin anodised or gold anodised. 60 minute versionavailable in brushed and polishedstainless steel, polished brass. Fire,Smoke & Acoustic in one system.

Other sizes available for 30 minuteFire/smoke rated or Fire/smoke &Acoustic rated are 47-52 mm & 52mm-57mm in either SA or GA finish. Othersizes available for 60 minute Fire ratedor Fire/smoke & Acoustic rated are 42-47 mm & 47mm-52mm in either SS,MPS or PB finish. Any RAL Colour toorder in any style or size. Optionalsecurity features for 60 Minute versionsare an internal Security Cowl & Latch.

> Quick Overview

> How to order this product

FOR EXAMPLE12NO/ASTRO TELESCOPIC LETTER BOX FS/AFTLBFS/30SA/30 MINS/SATIN ALUMINIUM

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / RATING / COLOUR

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

PRODUCT REF DESCRIPTION COLOURAFTLBFS/30SA 30 Min Fire/Smoke 42-47mm Satin Anodised aluminiumAFTLBFS/30GA 30 Min Fire/Smoke 42-47mm Gold Anodised AluminiumAFTLBFS/60SS 60 Min Fire/Smoke 52-57mm Satin Brushed Stainless SteelAFTLBFS/60MPS 60 Min Fire/Smoke 52-57mm Mirror Polished Stainless SteelAFTLBFS/60PB 60 Min Fire/Smoke 52-57mm Polished Brass & LacquerAFTLBFSA/30SA 30 Min Fire/Smoke/Acoustic Satin Anodised aluminium

42-47mmAFTLBFSA/30GA 30 Min Fire/Smoke/Acoustic Gold Anodised Aluminium

42-47mmAFTLBFSA/60SS 60 Min Fire/Smoke/Acoustic Satin Brushed Stainless Steel

52-57mmAFTLBFSA/60MPS 60 Min Fire/Smoke/Acoustic Mirror Polished Stainless Steel

52-57mmAFTLBFSA/60PB 60 Min Fire/Smoke/Acoustic Polished Brass & Lacquer

52-57mm

> Availability

Page 11: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

11

INTUMESCENT LETTERBOX LINERS> Trade Name ASTROLINER

> Product DescriptionConsists of a high performance, selfadhesive backed, PVC laminatedintumescent material which has beendesigned to line the aperture ofletterboxes in fire resistant doors. Onexposure to a fire the liner will rapidlyexpand (intumesce) to seal the apertureand stop the spread of fire, smoke andhot gases through the door. The liner hasbeen independently tested in accordancewith BS476: Part 22: 1987 and the 50mmcan provide in excess of 1 hour fireresistance, 30min 44mm.

Tested to BS476: Part 22: 1987For use in 30 and 60 min. fire doorsChoice of Colour & LetterplatesSelf adhesive backedEasy to installMaintenance freeSuits new or retro-fitNHBC Type Approval.

Supplied in packs containing sufficientmaterial to suit any size aperture up to250x50mm and can be used in both 1/2and 1 hour fire door assemblies.Largersizes available on request.

Warrington Fire Research Assessment -30 minute liner 44mm, 60 minute liner50mm. Liner Colours - Black & Red.Letterplate colours - Brass or SatinAluminium effect.

> Quick Overview

PRODUCT REF 30 MIN LINER COLOUR LETTERPLATE COLOURAFLBL/B/30 BLACK N/AAFLBL/R/30 RED N/AAFLBSB/B/30 BLACK BRASSAFLBSB/R/30 RED BRASSAFLBSS/B/30 BLACK SILVERAFLBSS/R/30 RED SILVER

> Availability

PRODUCT REF 60 MIN LINER COLOUR LETTERPLATE COLOURAFLBL/B/60 BLACK N/AAFLBL/R/60 RED N/AAFLBSB/B/60 BLACK BRASSAFLBSB/R/60 RED BRASSAFLBSS/B/60 BLACK SILVERAFLBSS/R/60 RED SILVER

> How to order this product

FOR EXAMPLE12NO / ASTROLINER/ AFLBL/R/30/RED

PLEASE QUOTEQUANTITY/TRADE NAME/CODE/RATING/COLOUR

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 12: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

12

INTUMESCENT FIRE & SMOKE RATEDTELESCOPIC LETTERBOXES

> Trade Name ASTRO TELESCOPIC LETTERBOX FXC 30/60

> Product DescriptionA robust commercial metal framedtelescopic letterbox with metal flaps anda high performance intumescent liner.In the event of a fire the intumescentliner expands to seal the letterboxaperture and retains the fire integrity of the door. Fire and smoke rated for 30or 60 minutes, depending on version.Security tested to PAS 23/24.

Fitted with brush pile draught excludersand sound dampening bumpers with afully sealed backplate. Available in SatinAnodised Aluminium, Polished Gold andPolished Silver finishes.

Typical application: fitting to fire doors inmultiple occupancy residential buildings.

12" Width 30 / 60 min Fire RatedLetterboxAdjustable for door thickness from 40-80mmChoice of 3 letter plate finishesFire tested to BS 476 part 22Smoke Tested to BS 476 part 31.1Security tested to PAS 23/24BS 2911 Compliant

Cut out required on this size is 275mm x55mm. Brushes are designed to go tothe outside for maximum protection anddraught proofing.

The overall size is 306mm x 70mm andcomes as a 30/60 minute ratedintumescent telescopic letterbox systemwith matching metal frame and metalletter plate flaps available in three finishes:

Satin Anodised AluminiumPolished Gold Anodised Polished Silver

An adjustable telescopic sleeve can be setfrom 40mm to 80mm door thickness.Letterbox flaps open to 115°. Tested foruse up to 1050 mm from floor level

> Quick Overview

> How to order this product

FOR EXAMPLE12NO / ASTRO TELESCOPIC LETTER BOX FXC60 / AFTLBFXC/60SAAMF / 60 MINS / SAA

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / RATING / FINISH

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

PRODUCT REF DESCRIPTION FINISHAFTLBFXC/30SAAMF 30 Minute Fire / Smoke Letterbox Satin Anodised Aluminium

- 306 x 70mm (SAA)AFTLBFXC/30GAMF 30 Minute Fire / Smoke Letterbox Polished Gold

- 306 x 70mmAFTLBFXC/30PAMF 30 Minute Fire / Smoke Letterbox Polished Silver

- 306 x 70mmAFTLBFXC/60SAAMF 60 Minute Fire / Smoke Letterbox - Satin Anodised Aluminium

306 x 70mm (SAA)AFTLBFXC/60GAMF 60 Minute Fire / Smoke Letterbox - Polished Gold

306 x 70mmAFTLBFXC/60PAMF 60 Minute Fire / Smoke Letterbox - Polished Silver

306 x 70mm

> Availability

Page 13: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

13

FIRE RATED DOOR VIEWER> Trade Name ASTRO FR DOOR VIEWER

> Product DescriptionThe Astroflame Fire Rated Door Vieweris suitable for standard size thicknessesof 35mm - 55mm and is fire rated for 60minutes. Offering 180 degree view andmade from solid brass with 3 Pyrex glasslenses with a 14mm barrel. Conforms toDHF TS02 Specification

Fire Rated Door Viewer.Tested to BS476 Pt.22 60 min.Tested to EN1634-1 30 min.Solid brass with Pyrex lensesSuits 35mm - 55mm thickness doors180 degree viewing angleBrass or Chrome finish

> Quick Overview

> How to order this product

FOR EXAMPLE2 NO / AFDV38G / GOLD OR 2 NO / AFDV38S / SILVER

PLEASE QUOTEQUANTITY / PRODUCT REF / FINISH

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

> How to order this product

FOR EXAMPLE6 NO / AFDV14B / BRASS OR 6 NO / AFDV14C / CHROME

PLEASE QUOTEQUANTITY / PRODUCT REF / FINISH

FIRE RATED, HIGH SECURITY, DOOR VIEWER

> Trade Name ASTRO HS DOOR VIEWER

> Product DescriptionA door viewer with extra securityfeatures and designed for a wider rangeof users than standard door viewers.The special prism optics built into thissecure door viewer allow the viewer to bestood well back from the door and provideother special features:

Whoever is on the other side of the doorcan not see inside / view movementHigh and Low viewing angles supported.The person viewing can be up to 2metres back from the door and still seewho is outside over a viewing angle of up to 180°. High or Low viewing - theviewer can be standing or seated. Thelower viewing option is well suited towheelchair users or children.

High Security Door ViewerFire Rated for 60 minutes.Suits 35mm - 62mm thickness doorsPerson viewing can be seated or standing.Prism system permits viewer to be upto 2 metres away from the door.180° external viewing area.Antique Gold or Silver Finish in plastic.

> Quick Overview

Page 14: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

14

INTUMESCENT FIRE GRILLES> Trade Name ASTROGRILLE

> Product DescriptionA durable ventilation grille which is easilymounted in doors & walls, and canprovide in excess of 1/2 or 1 hour fireprotection. Astroflame Fire Grille comprisesof a moisture resistant intumescent corewithin a galvanized steel frame withvermin proof 6mm steel mesh fitted to both faces. Suitable for fitting up to 1,000mm (1m) from floor level. The design allows a free area of 80%approximately. See our air-flow tablebelow for guidance.

All square and rectangular grilles areavailable to suit 30 minute or 60 minutefire rated applications. Maximum singlegrille size is 600 x 600 mm or equivalentarea. Circular grilles are available in 100,125, 150, 200, 225, 250 and 300mm diametersizes and are 60 minute fire rated.

Calculations made using 80%(approx)free air flow Please note that this table

Fire Grilles tested to: BS EN 1634-2 +BS476 pt22Comprehensive range of sizes includescircular types.For use in doors & wallsSuitable for mounting up to 1,000mm(1m) from floor level.In excess of 30 or 60 minutes fire rating Vermin proof wire mesh 80% free area NHBC Type Approval.

does not allow for the effects of fittingany of the Astroflame Steel LouveredFace Plates, or any other type of aestheticallypleasing cover over the fire grille. > Quick Overview

> How to order this product

FOR EXAMPLE2 / ASTROGRILLE / AFFG 300200 / 300X200MM

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / SIZE

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

100 150 200 225 250 300 350 400 450 500 550 600100 80cm2 120cm2 160cm2 180cm2 200cm2 240cm2 280cm2 320cm2 360cm2 400cm2 440cm2 480cm2150 180cm2 240cm2 270cm2 300cm2 360cm2 420cm2 480cm2 540cm2 600cm2 660cm2 720cm2200 320cm2 360cm2 400cm2 480cm2 560cm2 640cm2 720cm2 800cm2 880cm2 960cm2225 405cm2 450cm2 540cm2 630cm2 720cm2 810cm2 900cm2 990cm2 1080cm2250 500cm2 600cm2 700cm2 800cm2 900cm2 1000cm2 1100cm2 1200cm2300 720cm2 840cm2 960cm2 1080cm2 1200cm2 1320cm2 1440cm2350 980cm2 1120cm2 1260cm2 1400cm2 1540cm2 1680cm2400 1280cm2 1120cm2 1600cm2 1760cm2 1920cm2450 1620cm2 1800cm2 1980cm2 2160cm2500 2000cm2 2200cm2 2400cm2550 2420cm2 2640cm2600 2880cm2

> Free Air flow Table

Top row is width dimension. First column is Height dimension. Sizes in mm

400mm 400mm

800mm

20

0m

m

1500mm

30

0m

m

500mm 500mm 500mm

500mm 500mm

1000mm4

00

mm

80

0m

m

Circular

Fire Grilles range

from diameter

sizes 100mm -

400mm

Page 15: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

15

AIR TRANSFER FACE PLATES> Trade Name ASTRO PLATES

> Product DescriptionAstroflame Face Plate Series presents aMild Steel Louvered Grilles designed tosatisfy all types of air transfer applicationin offices, shops, schools, hospitals and many other commercial projects.Manufactured using modern pressmachinery and production techniquesthe Astroflame Face Plate series isrobustly fabricated from 2Oswg mildsteel and comprises of horizontal louvresset on an 8.5mm pitch with a 30%downward deflection.

Suitable for internal, surface mounting indoors and walls. The steel construction

Steel constructionSatin Aluminium or White finishCustom finish to RAL colour available.For internal useComplete range of sizesDoor or wall mounting

ensures that the unit is satisfactory notonly for Astroflame Intumescent FireGrilles but can also be used in standardair transfer applications, utilised with thewide flange border providing adequateclearance for fixing to the surroundingstructure. Slimline and unobtrusive theunit offers a free area around 70% foreconomical selection and is readilyavailable in a wide variety of normal and reverse of list sizes. Standard finishis Satin Aluminium. White or RALcolours available on request.

> Quick Overview

SIZE MM 100.00 150.00 200.00 250.00 300.00 350.00 400.00 450.00 500.00 600.00100.00 102x102 152x102 203x102 254x102 305x102 356x102 406x102 457x102 508x102 610x102150.00 152x152 203x152 254x152 305x152 356x152 406x152 457x152 508x152 610x152200.00 203x203 254x203 305x203 356x203 406x203 457x203 508x203 610x203250.00 254x254 305x254 356x254 406x254 457x254 508x254 610x254300.00 305x305 356x305 406x305 457x305 508x305 610x305350.00 356x356 406x356 457x356 508x356 610x356400.00 406x406 457x406 508x406 610x406450.00 457x457 508x457 610x457500.00 508x508 610x508600.00 610x610

> Dimensional Data

> How to order this product

FOR EXAMPLEAFP150150/SA : AFP500400/WHT

PLEASE QUOTEAFP (WIDTH X HEIGHT) / COLOUR

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 16: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

16

INTUMESCENT GLAZING CHANNEL> Trade Name ASTRO U CHANNEL

> Product DescriptionU Channel for 6mm glass. Cost effective,easily installed dry glazing gasket for usein fire doors using clear or wired glass.Elastic composition of the channel gripsthe glass. 15mm tall 10.5mm wide andsupplied in 100 Metre lengths.

Colour - Black OnlyMeets appropriate BS and BuildingRegulation standards.

30 minute ratedBS 476 Parts 20 & 22 1987For use in glass up to 600mm x 600mmIntumescent materialImpervious to water and moisture.Easy and clean application.Elasticated material grips the glass.

> Quick Overview

> How to order this product

FOR EXAMPLE5 / ASTRO U CHANNEL / AFUC6/ 100M

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / LENGTH

INTUMESCENT GLAZING TAPE> Trade Name ASTROTAPE

> Product DescriptionA flexible self adhesive polymer basedextruded intumescent material suitablefor sealing wired or fire resistant glazinginto wooden fire doors and fire resistantpartitions. On exposure to heat from afire Astroflame Intumescent tape swells,thus prohibiting smoke and flame from

Tested to BS476: Part 22: 1987Available in Brown, Off-White or Black½ hour Fire RatingEasy & Clean ApplicationA pliable re-shaped strip that bondswell to Wood & GlassNHBC Type Approval.

> Quick Overview

> How to order this product

FOR EXAMPLE10 / ASTROTAPE / AFT12B / BROWN

PLEASE QUOTEQUANTITY/TRADENAME/PRODUCT REF/COLOUR/

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

passing through the aperture betweenwood and glass, providing resistance inexcess of 1/2 hour. Supplied in roll form itoffers the user a high performance, nonload bearing tape for accurate placement,with no waste and requiring no specialistapplications.

CODE COLOUR SIZEAFIT12B BROWN 12mm x 3mm x 15mtrAFIT12W OFF-WHITE 12mm x 3mm x 15mtrAFIT12BLK BLACK 12mm x 3mm x 15mtr

> Availability

Page 17: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

17

ACOUSTIC & SMOKE PERIMETER SEALS> Trade Name ASTRO ASP SEAL

> Product DescriptionA co-extruded PVC, acoustic and smokeperimeter self adhesive seal. Located inthe protected corners of rebated framesof single or double broad butt hingeddoors and windows. The Min / Max Gapis 3mm to 5.5mm. Acoustically andsmoke tested on proprietary fire doors. Noise Reduction Index up to Rw39dB*.Suitable for new and retrofit applicationsthe seals are quick and easy to apply.

Applications• Pedestrian doorsets, single and doubleleaf configurations• Surface mounted substrates: timber,steel, composite materials• Latched and unlatched doors• New build or retro-fit applications

Perimeter seals for proprietary firedoors acoustically and smoke tested.BS 476 Part 31.1BS EN 1634 Part 4Sound reduction Up to Rw39dB* (single seal)Up to Rw35dB* (twin fin)Suitable for new and retrofitEasy to install ASP self adhesive sealsColour options for ASP seal Black,Brown, White, Light Oak

Product Features• Rigid legs with a flexible hinged cornermakes for easy fitting• Excellent compression and deflectionperformance• Low closing forces due to low co-efficientmaterial used

The Astro Acoustic & Smoke Perimeterseal is manufactured from a rigid andflexible flame retardant PVC, completewith an aggressive self adhesive backingtape on both sides of the rigid carrier.For full acoustic and smoke sealing theASTRO Acoustic & Smoke Perimeter sealshould be used in conjunction with arebated, semi morticed or surfacemounted door bottom seal and whererequired acoustic & perhaps disabledaccess threshold seal.Length: 2100mm

> Quick Overview

> How to order this product

FOR EXAMPLE10 / ASTRO ASP SEAL / 2100MM / WHITE / AFASP/WHT

PLEASE QUOTEQTY / TRADE NAME / TYPE / COLOUR / PRODUCT REF

ACOUSTICRATED

ACOUSTIC & SMOKE PERIMETER SEALS> Trade Name ASTRO ASP/TF SEAL

> Product DescriptionSimilar to the ASP Seal the ASPTF TwinFin Seal is a compact design ideal forhygiene and clean rooms and removesthe need to fit separate smoke seals.

Engineered to size to avoid overlappingdoor ironmongery with excellentcompression and deflection performanceand allows reduced door closing forcedue to a low co–efficient material usedin integral fins. Acoustically and smoketested on proprietary fire doors. NoiseReduction Index up to Rw35dB*.Suitable for new and retrofit applications

the seals are quick and easy to apply. The Astro Acoustic & Smoke PerimeterTF seal is manufactured from rigid andflexible flame retardant PVC, completewith an aggressive self adhesive backingtape. For full acoustic and smoke sealingthe Astro Acoustic & Smoke Perimeterseal should be used in conjunction with arebated, semi morticed or surfacemounted door bottom seal and whererequired acoustic & perhaps disabledaccess threshold seal. Length: 2100mmColours: Black, Brown, White or Light Oak

ACOUSTICRATED

> How to order this product

FOR EXAMPLE10 / ASTRO ASPTF SEAL / 2100MM / WHITE / AFASPTF/WHT

PLEASE QUOTEQTY / TRADE NAME / TYPE / COLOUR / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 18: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

18

A = 10.0mmB = 7.5mmC = 2.0mm

A = 18.0mmB = 11.0mmC = 13.0mm

ACOUSTIC DOUBLE DOOR SEAL> Trade Name ASTRO AS FLIPPER SEAL

> Product DescriptionThe Astro AS Flipper Seal with a doubleflipper meeting style seal has beendesigned for use with either plain orrebated double doorsets, specifically toimprove the aesthetics and acousticproperties. It has been tested to show anunaided weighted sound reduction of upto 36dB*. The product is supplied fittedwith a high performance self adhesivetape to allow the product to be fitted inposition prior to screw fixing and isavailable in various colours.

Testing undertaken in accordance withBS EN ISO240-3:1995 revealed a timberdoorset assembly with no seals fitted

> How to order this product

FOR EXAMPLE10 / ASTRO AS FLIPPER SEAL / AFASFLIPBLK / BLACK

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / COLOUR

ACOUSTICRATED

Sound Reduction of up to 36dB*Suitable for Plain or Rebated stylesEasy to install - self adhesive sealsColour options Black, Brown, White,Light Oak

> Quick Overview

around the perimeter of the doorsetachieved a Rw23dB rating. This falls well below the minimum specified inApproved Document E which is 29dB.When tested again with the Astro ASFlipper Seal there was an increase in the performance to Rw36dB.

Sold individually in 2100mm lengths

Colours: Black (AFASFLIPBLK)Brown (AFASFLIPBRN)White (AFASFLIPWHT)Light Oak (AFASFLIPLO)

ACOUSTIC DOUBLE DOOR SEALREBATE FIT

> Trade Name ASTRO AS QUAD FLIPPER SEAL

> Product DescriptionThis Quad Flipper meeting style seal hasbeen designed for use with either plainor rebated double doorsets, particularlywhere centre latches are required, butspecifically to improve the aestheticsand acoustic properties. It has beentested to show an unaided weightedsound reduction of up to 34dB*. Theproduct is supplied fitted with a highperformance self adhesive tape to allowthe product to be fitted in position priorto screw fixing and is easily cut to shapeto accommodate latch plates.

Testing undertaken in accordance withBS EN ISO240-3:1995 revealed a timber

Sound Reduction of up to 34dB*Fits in an 10mm x 2mm grooveEasy to install - self adhesive sealsSuitable for Plain or Rebated stylesPVC colour options Black, Brown,White, Light Oak

> Quick Overview

doorset assembly with no seals fittedaround the perimeter of the doorsetachieved a Rw23dB rating. This falls wellbelow the minimum specified inApproved Document E which is 29dB.When tested again with the Astro ASQuad Flipper Seal there was an increasein the performance to Rw34dB.

Sold individually in 2100mm lengths

Colours: Black (AFASQFLIPBLK)Brown (AFASQFLIPBRN)White (AFASQFLIPWHT)Light Oak (AFASQFLIPLO)

ACOUSTICRATED

> How to order this product

FOR EXAMPLE10 / ASTRO AS QUAD FLIPPER SEAL / AFASQFLIPBLK / BLACK

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / COLOUR

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 19: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

19

ACOUSTIC & SMOKE MEETING STYLE SEAL

> Trade Name ASTRO ASMS SEAL

> Product DescriptionASTRO ASMS MEETING STILE SEALSINGLE ACTION

An acoustic meeting stile seal for singleaction door leaves. The seal can be flushfitted or rebated. Screw fix (supplied)Standard lengths are 2100mm or

> How to order this product

FOR EXAMPLE10 / ASTRO ASMS MEETING STILE SEAL-SINGLE ACTION / 2100 / AFASMS/SA /2100

PLEASE QUOTEQTY / TRADE NAME / SIZE / PRODUCT REF

ACOUSTICRATED

2500mm. The minimum / maximum gapis 3-8mm. Satin anodised aluminiumfinish with a PVC seal for acousticperformance. Acoustically and smoketested on proprietary fire doors. NoiseReduction Index up to Rw36dB*.

ACOUSTIC & SMOKE MEETING STYLE SEAL

> Trade Name ASTRO ASMS/DA SEAL

> Product DescriptionASTRO ASMS MEETING STILE SEALDOUBLE ACTION

An acoustic meeting stile seal for doubleaction door leaves. The seal can be flushfitted or rebated. Screw fix (supplied)

> How to order this product

FOR EXAMPLE10 / ASTRO ASMS MEETING STILE SEAL-DOUBLE ACTION / 2100 / AFASMS/DA /2100

PLEASE QUOTEQTY / TRADE NAME / SIZE / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

ACOUSTICRATED

Standard lengths are 2100mm or 2500mm.The minimum / maximum gap is 3-8mm.Satin anodised aluminium finish with aPVC seal for acoustic performance.Acoustically and smoke tested onproprietary fire doors. Noise ReductionIndex Rw up to 36dB*.

Page 20: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

20

ACOUSTIC & SMOKE RATED DOOR BOTTOM SEALS - REBATED

> Trade Name ASTRO ASDB SEAL

> Product DescriptionASTRO ASDB SEAL - Rebate Fit VersionAn automatic door bottom seal which isspring loaded to lift clear of the floor assoon as the door leaf is opened by a fewmillimetres. An acoustically designedseal for rebated applications. mountedinto a 13mm x 28mm groove that hasbeen morticed into the bottom edge ofthe door. It is operated automatically bypressure against the door jamb on itsadjusting screw and seals when the doorcloses and retracts automatically whenthe door is opened. Can be fitted inside(lock side using bumper provided) oroutside of the door (non lock side). Testedfor durability 200,000 cycles completedwithout failure for fire rated smoke doors.Suitable for all types of wooden doors.14mm maximum drop, Graduated Scissoraction (seal drops on hinge side beforelock side). Noise Reduction Index up toRw42dB. Min/Max Gap: 3mm - 13mm.

ACOUSTICRATED

Door bottom seals - drop down type.Acoustically and smoke tested onproprietary fire doorsAluminium body with self extinguishingPVC rubber coextruded seal and carrier.Sound reduction up to Rw42dB or 51dBx versionSuitable for new and retrofitRebated fitting - comes with prefittedscrews.Anodised satin clear finishTested to 200,000 cycles.

> Quick Overview

Seal Lengths: 330mm, 430mm, 530mm, 630mm,730mm, 830mm, 930mm, 1030mm,1130mm, Maximum trimming length100mm. Anodised Satin clear finish. Seal easily removed to prevent damageduring installation.

> Trade Name ASTRO AFASDBX/FBEXT AFASDBX/FBBOLT

> Product DescriptionA unique solution to fitting rebated flushbolts in conjunction with drop down seals.The DB SEAL Extension works as anextender with the Astro DB Seal Plusdrop down seal. 10mm maximum dropand the seal is manually lowered on thehandle side.

ACOUSTICRATED

Also available are 150mm Stainless SteelFlush Bolts (AFASDBX/FBBOLT) withradiused ends designed to work with theDB Seal Extension. Suitable for doubleleaf timber doors. Acoustically andsmoke tested on proprietary fire doors.Noise Reduction Index Rw35dB.

> Trade Name ASTRO AFASDBX DB PLUS SEAL

> Product DescriptionAn automatic door bottom seal which isspring loaded to lift clear of the floor assoon as the door leaf is opened by a fewmillimetres. An acoustically designed sealfor rebated applications. mounted into a15mm x 28mm groove that has beenmorticed into the bottom edge of the door.It is operated automatically by pressureagainst the door jamb on its adjustingscrew and seals when the door closes andretracts automatically when the door isopened. Can be fitted inside (lock sideusing bumper provided) or outside of thedoor (non lock side).

ACOUSTICRATED

Tested for durability 200,000 cyclescompleted without failure for fire ratedsmoke doors. 14mm maximum drop,Graduated Scissor action (seal drops onhinge side before lock side). Seal easilyremoved to prevent damage duringinstallation. Noise Reduction Index up toRw51dB. Min/Max Gap: 3mm - 14mm.Seal Lengths: 330mm, 430mm, 530mm,630mm, 730mm, 830mm, 930mm,1030mm, 1130mm, 1230mm. Maximumtrimming length 150mm. Anodised Satinclear finish

> How to order this product

FOR EXAMPLE10 / ASTRO DB SEAL PLUS EXTENSION / AFASDBX/FBEXT

PLEASE QUOTEQTY / TRADE NAME / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 21: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

21

ACOUSTIC & SMOKE RATED DOORBOTTOM SEAL - SURFACE MOUNTED

> Trade Name ASTRO ASDB/SM SEAL

> Product DescriptionASTRO ASDB/SM SEAL is a automaticdoor bottom seal which is spring loadedto lift clear of the floor as soon as thedoor leaf is opened by a few millimetres.

An acoustically designed seal for facemounted applications. It is operatedautomatically by pressure against thedoor jamb on its adjustment block andseals when the door closes and retractsautomatically when the door is opened.Can be fitted inside (lock side usingbumper provided) or outside of the door(non lock side)

Tested for durability 200,000 cyclescompleted without failure for fire ratedsmoke doors. 14mm maximum drop,Seal drops on hinge side before lock side.Suitable for all types of swing doors.Noise Reduction Index: Rw up to Rw33dB*Min/Max Gap: 3mm - 14mm.

ACOUSTICRATED

Surface Mounted door bottom seal -drop down type.Suitable for wooden or metal doorassemblies.Acoustically and smoke tested onproprietary fire doorsAluminium body with selfextinguishing PVC rubber coextrudedseal and carrier.Sound reduction of up to Rw33dB*Suitable for new and retrofitScrew fixing (screws supplied)Anodised satin clear finishTested to 200,000 cycles.

> Quick Overview

Seal Lengths: 330mm, 430mm, 530mm, 630mm,730mm, 830mm, 930mm, 1030mm,1130mm, 1230mm. Maximum trimming length 150mm.Finish: Anodised Satin Clear.

> How to order this product

FOR EXAMPLE10 / ASTRO ASDBSM SEAL / 1030 / AFASDBSM/1030

PLEASE QUOTEQTY / TRADE NAME / SIZE / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

TURN TO PAGE 60 FOR OUR RANGE OF ANTI-GRAFFITI PAINTS OR VIEWWWW.ASTROFLAME.COM AND CLICK ANTI-GRAFFITI.

FOR ANTI-GRAFFITIPAINTS THINK...

ASTROFLAMEM A N U F A C T U R E R S O F PA S S I V E F I R E S T O P P R O D U C T S

Don’t let them get away with it!

Page 22: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

Acoustic

Ambient (cold) Smoke up to 70oC

Medium Temp. Smoke 200oC for 30 minutes (Smoke Doors)

Fire & Hot Smoke Fully developed fires exceeding 600oC and hot smoke beyond 200oC (Intumescent Fire Seals)

Insects and Vermin

Weather

Energy, Draughts & Dust

Fire (approved)

Access & Mobility

Light

22

Raven Door Sealing Systems are available to combat draughts, dust, rain, noise,heat loss, heat gain, fire, smoke and stray light. The following is a selection of theRaven Smoke Rated Seals available from the comprehensive range shown onwww.astrodraft.com. All seals are only available in an anodised satin clear finish. L = Light Duty seals include those typically used in residential applications or lighttraffic areas. M = Medium Duty seals are used in commercial applications such asoffice spaces, shops, commercial accommodation or medium traffic areas. H =Heavy Duty seals are designed for areas with a high level of use such as publichospitals, airports, factories, shopping centres or areas with a large through flow of pedestrian and wheeled traffic.

DOOR BOTTOM SMOKE SEAL RP8SI> Product DescriptionA hot smoke automatic door bottom seal,with an extruded silicon sealing component,that conforms to the 200 degrees Celsiusrequirement of BCA c3.4.RP8Si is springloaded to lift clear of the floor as soon as thedoor leaf is opened by a few millimetres.Mounted into a 15mm x 34mm groove that hasbeen morticed into the bottom edge of thedoor, it is operated automatically by pressureagainst the door jamb on its adjusting screw.

RP8Si has been tested for durability1,000,000 cycles completed without failure.Location: Single and double, butt hinged doors.Min/Max Gap: 3mm/13mm.Seal Lengths: 380mm, 600mm, 820mm,915mm, 1070mm, 1220mm (max). Seal cutback to exact size. Standard Finish:Anodised Satin Clear or Bronze (poa).

M

PERIMETER SMOKE SEAL RP24SI> Product DescriptionAn adjustable door stop seal for noise, light andsmoke. The RP24 seal uses independentlyadjustable fasteners to achieve up to 8mmsealing adjustment for maximum noise control.The seal can be butt jointed at the corners toproduce an easily installed continuous sealaround the door frame. Its aluminium carrier issturdy and slotted for adjustment with concealedfixings. It is quick and easy to install around thejamb and head and can be fitted withoutremoving the door. It is tamper proof with fully

concealed fasteners to give the seal an aestheticappearance. The closed cell S.E. Sponge E.P.D.M.seal requires only normal door closing force. Iffixing to rebated frames of single doors, specify along backset door latch. RP24 has been grantedan Australian Design Award. It is an effectiveacoustic seal when tested in accordance withBS2750, it meets smoke leakage requirementsof BS5588 Pt 1 when tested in accordance withBS476 pT31.1 and has been fire tested inaccordance with BS476 Pt22 for half an hour.

H

PERIMETER SMOKE SEAL RP78SI> Product DescriptionA medium temperature smoke door frameseal that has been tested to AS 1530.4,AS/NZS 1905. 1 and conforms to BCA spec.C3.4. 200°C Medium temperature smoke.Equivalent to BS 476 part 20 and 22. It is an acoustically designed smoke seal for

installation on door stops and it can be mitredor butt jointed. Its aluminium carrier is sturdyand slotted for adjustment with concealedfixings. It is quick and easy to install aroundthe jamb and head and can be fitted withoutremoving the door.

M

FOR ADDITIONAL RAVEN SEALSPLEASE VIEW OUR WEBSITE OR GO TO THE DRAFT PROOFINGSECTION OF THIS CATALOGUE.

> How to order this productOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 23: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

23

THRESHOLD SMOKE SEAL RP82> Product Description

A low profile threshold plate used inconjunction with door bottom seals toprevent noise, rain, draught and smokeinfiltration.

Location: Door sills. Sizes: 1000 or2000mm stock lengths. Standard Finish:Anodised Satin Clear. Used in Conjunction:Raven door bottom seals.

H

DOOR BOTTOM SMOKE SEAL RP99SI> Product DescriptionRP99Si is a heavy duty automatic door bottomseal which is spring loaded to lift clear of thefloor as soon as the door leaf is opened by a fewmillimetres. An acoustically designed seal forface mounted, semi morticed or fully morticedapplications. It is operated automatically bypressure against the door jamb on its adjustmentblock. RP99Si seals when the door closes and

retracts automatically when the door is opened.RP99Si has been tested for durability, 1,000,000cycles completed without failure. RP99Siconforms to the 200 degrees Celsius requirementof BCA c3.4 spec, for fire rated & medium smokedoors. All fitting options have been tested andapproved on proprietory fire doors to 120minutes AS1530.4 and AS/NZS2905.1.

H

DOOR BOTTOM SMOKE SEAL RP70SI> Product DescriptionThe RP70Si automatic seal is the fully morticedversion of the RP38Si door seal. It is a heavyduty door bottom seal which is spring loaded tolift clear of the floor as soon as the door leaf isopened by a few millimetres. The seal is operatedautomatically by pressure against the door jambon the adjusting screw. It seals when the doorcloses and retracts automatically when door is

opened. It is self levelling. When using RP70sidoor bottom seal, the door must be a minimumof 45mm thick and of suitable construction formorticing this seal. It is reversible for left orright handed operation. Note: For double doors,plain meeting stiles are required. RP70Si hasbeen tested for durability ~ 1,000,000 cyclescompleted without failure.

H

DOOR BOTTOM SMOKE SEAL RP129SI> Product DescriptionA silicon rubber seal in a 15 micron anodisedAluminium carrier. Seal carrier is pre-drilled withfixing slots at regular intervals and matchingscrews are supplied. The seal can be checked outor drilled to accommodate the pivot, therebyproviding a continuous seal. Durability Tested toover 1,000,000 operating cycles without failure.Full installation instructions are included with theproduct. Location: Double butt hinged and centre

pivot double acting doors. Min/Max Gap 14mm to18mm. Seal Sizes Available in 1250 mm lengthsStandard Finish: Aluminium anodised 15 microns.Satin Clear (Silver). Seal Material: Silicon Rubber(SE) (Light grey) Fixing Method: Zinc plated, crossrecess S.T. screws of the appropriate size andcolour are supplied. Used in Conjunction: Raventhreshold plates. Raven RP115 Threshold Platerecommended.

H

THRESHOLD SMOKE SEAL RP19> Product DescriptionA medium temperature smoke door frame sealthat has been tested to AS 1530.4, AS/NZS1905. 1 and conforms to BCA spec. C3.4. 200°CMedium temperature smoke. Equivalent to BS 476 part 20 and 22. It is an acousticallydesigned smoke seal for installation on door

stops and it can be mitred or butt jointed. Itsaluminium carrier is sturdy and slotted foradjustment with concealed fixings. It is quick andeasy to install around the jamb and head andcan be fitted without removing the door.

H

> How to order this productOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 24: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

FINGERKEEPER COMMERCIALFRONT & FINGERKEEPER COMMERCIAL REAR GUARD

> Trade Name ASTRO FINGERKEEPER

24

> Product DescriptionFinger Keeper is a finger guard thatprevents door finger trapping accidents.By totally covering the gap that is createdon the hinge side of a door, in the openposition, it prevents finger trappinginjuries. Finger Keeper can be fitted tomost types of doors including wood,metal and uPVC.

Sold in 1960mm lengths. Full fitting kit included. Also acts as a secondarysmoke inhibitor and draught excluder.Low maintenance - wipe clean finish.Extremely simple to install and has along life expectancy and can be easilyremoved and refitted for door paintingetc. no glue or nails required. Four panel,wide opening option with additionalcentre panel for doors with an openingangle greater than 180°. Schools, DayCare Centres, Nurseries etc. - create thesafest working environment and avoidpotentially costly and disruptive injuryclaims. You may also benefit fromreduced insurance premiums.

Finger Keeper is a finger guard (doorhinge guard) used to prevent fingertrapping accidents in doors.Acts as a secondary smoke inhibitorand draught excluder.Fits most door types.Fits many types of external gate.Long anticipated lifespan.Durable and simple DIY fitting.Wipe clean finish.Full fitting kit included.Easily removed and re-fitted to allowdoor maintenance.Ten colour options.Front and Rear hinge cover versionsavailable.Wide opening option available.

> Quick Overview

Finger Keeper Rear Guard

Finger Keeper Commercial

> How to order this product

FOR EXAMPLE10 /ASTRO FINGERKEEPR / AFFKBR / BROWN

PLEASE QUOTEQUANTITY / TRADE NAME/ PRODUCT REF / COLOUR

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

COLOUR White Brown Teak Beech Beige Black Grey Blue Yellow RedCODE WH BR TK BEE BEI BLK GR BLU YEL RED

> Availability

Sold individually or available to order in any quantity in 1960mm lengths.Standard opening option - quote product code AFFK/Colour for front or AFFK/Colour/H - for rear guard.

Wide Opening 4 panel option - quote codes below (Front Device Only):White: AFFKWHX Brown: AFFKBRX

Page 25: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

25

TRANSPARENT FINGER GUARD FOR DOORS

> Trade Name ASTRO FINGER GUARD CLEAR

> Product DescriptionA clear finger guard to fit most commoninterior door sizes. Self adhesive fittingstrips are incorporated into the guard,which can further secured with screwsfor maximum longevity.

Caution: Do not fit to doors that canopen more than 110° without restrictopening to 110° or less using a doorstopper, otherwise the strips are likely to tear off from the door or frame andcause damage.

Available in 1950mm lengths. Packed -individually.

Finger Guard Clear is a strong,transparent finger guard.Length 1950mm. Opening angle up to 110°Door thickness up to 5cmSuitable for internal doors opening upto 110 degrees and up to 5cm thick.Easy to install to nearly all types ofdoors using the self-adhesive stripbuilt into the guard.For maximum integrity / longevity of thefinger guard we recommend additionalsecuring of the strip using screws ifdoor and frame materials permit.Tested to 100,000 open / close cyclesThe transparent guard avoids possibledécor colour clashes that can occur withsolid colour materials.'Soft feel' material resists cracking dueto kicks and knocks.

> Quick Overview

> How to order this product

FOR EXAMPLE10 / ASTRO FINGER GUARD CLEAR / AFFGCL

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

FITTED IN SECONDS. HOURS OF FIRE PROTECTION.INTUMESCENT FIRE & ACOUSTIC SOCKET BOX INSERT

www.astroflame.com

Recessed switch and sockets are used as the preferred option inmost domestic and commercial buildings, however they are alsothe cause of many problems and require special consideration tomeet both Building Regulations and Energy Efficiency concerns.

A recessed switch or socket penetrates the fire barrier of any firerated wall and creates an easy path for fire and smoke to quicklyspread from room to room. Fit an ‘Intumescent Fire and AcousticSocket Box Insert’ from Astroflame, suitable for plastic or metalback boxes, and you’ll get a full 2 hours protection against thespread of fire - enough time to protect property and save lives.

THE BEST ADVICE. THE BEST FIRE SAFETY PRODUCTS.

DOOR PROTECTION I FINGER PROTECTION I SAFETY CUSHIONING I FIRE STOPPRODUCTS I LIGHTING PROTECTION I MASTICS & FOAMS I FIRE PROOF PAINTSANTI GRAFFITI PAINTS I DRAUGHT PROOFING I ACOUSTIC SEALS & DISABLED ACCESS.

ALSO AVAILABLE FROM ASTROFLAME:

ASTROFLAMEM A N U F A C T U R E R S O F PA S S I V E F I R E S T O P P R O D U C T S

ITEM COLOUR LENGTH [MM] PRODUCT REFFINGER GUARD CLEAR TRANSPARENT 1950 AFFGCL

> Availability

Page 26: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

26

FINGER SAVER PVC FRONT GUARD> Trade Name ASTRO FINGER SAVER ELITE - FRONT

> Product DescriptionFinger Saver Elite Front is a neatly fittingfinger safety device which prevents fingersbeing jammed on the hinge side of a doorand the jamb on the hinged side.When fittedthe gap is covered completely and it is suitablefor domestic or commercial use. The deviceis a door safety accident prevention productthat blocks the cavity formed between theedge of the door and the door frame andprevents fingers entering the cavity by meansof a folding finger safety device. FingerSaver Elite Front can be fitted to most typesof doors including wood, metal and UPVC.Extremely simple to install and can be easilyremoved and refitted for door painting.Doors are used everyday by everybody butthey are potentially dangerous and accordingto ROSPA there are over 30,000 fingerinjuries every year. Teachers, parents, and

Aesthetically pleasing slim-line design- once fitted it is hardly noticeable.Supplied in 1.95m length to suitstandard UK doors.Suitable for areas of heavy pedestriantraffic.Fits on left and right hand opening doors.Permits 180° opening on a standardhinged doors.Easy to install, no specialist tools orequipment.

> Quick Overview

carers have become increasingly aware ofthe danger of children trapping their fingersin closing doors and to avoid accidentsrecent legislation BS7036 Part 4: item 7.1recommends "the use of a finger saverthat either fills the finger trap or minimisesthe gap so as not to create a finger trap.Finger Saver Elite Front is manufacturedfrom co-extruded uPVC and after easyfitting requires no maintenance other thana wipe down with a damp cloth for cleaning.

Available in Brown, White and Black fromstock, other colours available for specialorder along with an Anti Bacterial finish forreduction of bacteria and other germs.Length 1950mm. If fitting the Finger SaverElite Rear device you must fit the reardevice before this front device.

> How to order this product

FOR EXAMPLE10 / ASTRO FINGER SAVER ELITE - REAR / AFFSAVELRA

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

COLOUR CODE LENGTHBlack AFFSAVELFBLK 1950MMBrown AFFSAVELFB 1950MMWhite AFFSAVELFW 1950MM

> Availability

> How to order this product

FOR EXAMPLE10 / ASTRO FINGER SAVER ELITE - FRONT / BLACK / AFFSAVELFBLK

PLEASE QUOTEQUANTITY / TRADE NAME / COLOUR / PRODUCT REF

SLIM REAR PVC FINGER GUARD> Trade Name ASTRO FINGER SAVER ELITE - REAR

> Product DescriptionFinger Saver Elite Rear is the lightestfinger-protection system to be installed on the knuckle side of the door hinge. Easyto install with just double-sided adhesivetape, protects the external part of the doorhinge on wood doors.

Together with Finger Saver Elite Front itguarantees total safety from the risk offinger pinching allowing the door to openup to 180°. Finger Saver Elite Rear is abudget priced guard to cover the rear hinge

gap for total protection from fingertrapping accidents. Ideal product for fittingwhen restricted access.Only for use inconjunction with standard commercialhinge with a barrel diameter between 12-18mm. Available in Aluminium effect finish from stock other colours available for special order. Also available in an AntiBacterial finish to special order.

Size 1800mm Product Code: AFFSAVELRA

Page 27: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

27

FINGER GUARD FOR CENTRE PIVOT OR BUTT HINGED DOORS

> Trade Name ASTRO FINGER GUARDIAN

> Product DescriptionAstro Finger Guardian is a door hingesafety system designed to prevent theentrapment of fingers in the hinge gapof a door in the most demandingenvironments. Finger Guardian is a flexiblesafety strip which prevents fingers beingjammed on the hinge side of a door andthe jamb on the hinged side. When fittedthe gap is covered completely and it issuitable for domestic or commercial use.

Finger Guardian is manufactured fromPVC Nitrile and once installed requires nomaintenance other than a wipe downwith a damp cloth for cleaning. With an aesthetically pleasing slim-line design

Finger Guardian is suitable for Butt Hinged or Pivot DoorsUp to 180° openingLeft or Right handed opening doorsFront and Rear typesFinishes include Black, Brown,Whiteand Ash, Beech, Maple and Oakwoodgrains’.Anti-Bacterial finish POA

> Quick Overview

this finger guard is easy to install,requiring no specialist tools or equipment.Self-adhesive backing strips are used toposition the guard holding strips, whichare then reinforced by screws (supplied),neatly concealed by the guard design.

Finger Guardian comes in Front and Rearstyles (dimensions in mm). Front to fit180° door openings. Rear to fit 105° dooropenings - only for use on the rear of thedoor. Five colours and four wood grainfinishes, to match door veneers, areavailable. Cover strips, used to concealfitting screws (supplied) are colourmatched to the guard. Anti-Bacterialfinish POA.

COLOUR / FINISH GUARDIAN FRONT 180° GUARDIAN REAR 105 ° GUARDIAN SETBrown AFFGUBRNF AFFGUBRNR AFFGUBRNSETBlack AFFGUBLKF AFFGUBLKR AFFGUBLKSETWhite AFFGUWHTF AFFGUWHTR AFFGUWHTSETBlue AFFGUBLUF AFFGUBLUR AFFGUBLUSETGrey AFFGUGRYF AFFGUGRYR AFFGUGRYSETOak AFFGUOKF AFFGUOKR AFFGUOKSETAsh AFFGUASHF AFFGUASHR AFFGUASHRSETBeech AFFGUBEEF AFFGUBEER AFFGUBEESETMaple AFFGUMAPF AFFGUMAPR AFFGUMAPSET

> AvailabilitySold individually or available to order in any quantity in 1950mm lengths.

> How to order this product

FOR EXAMPLE10 /ASTRO FINGER GUARDIAN / AFFGUBRN / BROWN

PLEASE QUOTEQUANTITY / TRADENAME/ PRODUCT REF / COLOUR

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 28: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

28

HEAVY DUTY HINGE GUARD> Trade Name FINGER KEEPER INDUSTRIAL

> Product DescriptionFingerkeeper Industrial is a heavy dutyfinger-pinch protection device (anti-finger-trapping hinge guard) manufacturedfrom Black EPDM fitted in an anodizedaluminium carrier, that has black insertsto conceal the fixing screws. The EPDMsafety strip prevents fingers beingpinched on the hinge side of a door. It is fixed to the door and the jamb on the hinged side.

A wider safety strip is available forcovering large gap openings, such as

powered gates etc. 260mm wide blindcompared to standard 157mm.

Seal Lengths: Guards are available in2100mm or 2500mm lengths and can becut to length required. For longer lengthsbutt joint strips together (or to specialorder).Standard Finishes: Carrier: Satin ClearAnodised Aluminium (15 microns) Strip:Black EPDM rubber. Satin Clear AnodisedAluminium with a PVC Blind in Brown orWhite.

Suited to demanding commercial and industrial environmentsAnodized Aluminium and EPDM RubberCan be retro fittedFits butt hinged or centre pivot doorsEasily extended for non standardheight doors.Conforms to UK H&S Regs. 1992 (SI 3004)Available for standard or wide opening gaps

> Quick OverviewCOLOUR CODE SIZEAluminium / Black EPDM Rubber / Black cover strips AFFKIND 2100mmAluminium / Black EPDM Rubber / Black cover strips AFFKINDX 2500mmAluminium / Black EPDM Rubber / Black cover strips. Wide Blind AFFKINDWB 2100mmAluminium / Brown PVC / Brown cover strips AFFKINDPVCB 2100mmAluminium / White PVC / White cover strips AFFKINDPVCW 2100mm

> Availability

> How to order this product

FOR EXAMPLE10 / ASTRO FINGERKEEPER INDUSTRIAL / AFFKIND / 2100

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / SIZE

DIGISAVER ALUMINIUM FINGER GUARD> Trade Name ASTRO DIGISAVER

> Product DescriptionThis aluminium guard will not crack, tearor rip in the way that plastic polymerbased guards can when subject to abuseor hard knocks. The guard slides on ashort track, which uses a self-lubricatingplastic to minimise maintenance needsand can be installed in a few minutes.

> How to order this product

FOR EXAMPLE10 / ASTRODIGISAVER / 120 / AFFGDS120

PLEASE QUOTEQUANTITY / TRADE NAME / SIZE / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Supplied in 2000mm lengths that can be cut to required door opening height.Versions for 120° and 180° door openingangles are available. NOTE: The doorsurface material must be able to acceptthe screws used to secure the guard'sguide rails.

> Quick OverviewAll aluminium finger guard for timber doorsFabricated from strong T6 Aluminium AlloyModels for 120° and 180° door opening anglesEasily fitted to new or existing doors usingnormal hand toolsLow maintenance needsHygienic wipe-clean satin aluminium surfaceSuitable for single swing doorsAvailable in Satin Aluminium finish in2000mm lengthsSupplied with all fittings and instructions

ITEM OPENING ANGLE SIZE COLOUR PRODUCT CODEDigiSaver 120 120 degrees 2000 mm SAA Silver AFFGDS120DigiSaver 180 180 degrees 2000 mm SAA Silver AFFGDS180

Page 29: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

29

FINGER DEFENDER> Trade Name ASTRO FINGER DEFENDER

> Product DescriptionAstro Finger Defender is a durable, highquality finger guard suitable for most singleand double-action doors, includingautomated doors. It prevents fingers enteringthe cavity formed between the door and theframe by means of a non-flammable blind,which opens and closes with the action of thedoor and retracts into the aluminium housingwhen not in use.

The aluminium housing is available in threestandard finishes and (subject to orderquantity) any RAL colour. Independentlytested to over 1 million opening & closingcycles. The guard has concealed screw fixings and comes complete with end caps for a neat finish. Maximum opening: 260mmStandard sizes 1925mm and 2015mm.

> How to order this product

FOR EXAMPLE10 / ASTRO FINGER DEFENDER / 1925 / SAF / AFFDEFSAF

PLEASE QUOTEQUANTITY / TRADE NAME / SIZE / COLOUR / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Lengths : 1925 mm or 2015mm. HousingColours: Silver Anodised, Dark BronzeAnodised, White or Colour coated to any RALColour. Blind colour: Black

Available to order in any quantity, except RALcolours, which are subject to minimum orderquantity. Colour samples available on request.

> Quick Overview

Prevents finger trapping accidents.Suitable for automatic or manualoperation doors.Suitable for most single or double-action doorsExtremely durable and maintenance freeTested to over 1 million open & closingcyclesFits any door up to 180° openingImpact resistant aluminium housing.Silver or Dark Bronze anodised finish or White or any RAL colour.1925mm and 2015mm long versions

ITEM COLOUR LENGTH PRODUCT CODEFinger Defender - Silver Silver Anodised 1925 mm AFFDEFSAFFinger Defender - White White (RAL 9016) 1925 mm AFFDEFWHTFinger Defender - Dark Bronze Dark Bronze 1925 mm AFFDEFDBFinger Defender - RAL RAL Colours to Order 1925 mm AFFDEFCOLFinger Defender - Silver - Long Silver Anodised 2015mm AFFDEFSAFXFinger Defender - White - Long White (RAL 9016) 2015mm AFFDEFWHTXFinger Defender - Dark Bronze - Long Dark Bronze 2015mm AFFDEFDBXFinger Defender - RAL - Long RAL Colours to Order 2015mm AFFDEFCOLX

> Availability

Page 30: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

30

FINGER PROTECTA> Trade Name ASTRO FINGER PROTECTA

> Product DescriptionAstro Finger Protecta uses a highquality, resilient, fabric blind to preventfinger trapping accidents in doors. Theblind covers the hinge gap when thedoor is opened and retracts into therobust aluminium housing when thedoor is closed.

The retractor mechanism makes for atidy and robust guard which is notexposed to potential damage in the waythat concertina style guards are - evenwhen in the closed position.

Independently tested to over 1 millionopening & closing cycles. This hingeguard comes complete with end caps for a neat finish.

> How to order this product

FOR EXAMPLE10 / ASTRO FINGER PROTECTA / 260 / WHITE/ AFFPROWHT

PLEASE QUOTEQUANTITY / TRADE NAME / SIZE / COLOUR / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

This is a high quality guard at the topend of the price range but we think itrepresents good value and samplelengths are available so that the qualityof manufacture and colours can beassessed.

Lengths : 1925 mm with either 260mmor 320mm of travel. Housing Colours:Silver Anodised Finish, Dark Bronze,White or Colour coated to any RALColour Blind Colour: Black. Available to order in any quantity except RALcolours, which are subject to minimumorder quantity.

> Quick Overview

Very high quality 'roller blind' type door finger guardIn silver, white or dark bronze anodised finishes.Extremely durable and maintenance freeFits any door up to 180° openingImpact resistantSuitable for Automatic DoorsSuitable for most single or double-action doors

ITEM LENGTH MAX OPENING COLOUR PRODUCT CODEFinger Protecta 1925 mm 260mm SAA Silver AFFPROSAFFinger Protecta 1925 mm 260mm Dark Bronze AFFPRODBFinger Protecta 1925 mm 260mm White AFFPROWHT

Finger Protecta 1925 mm 260mm RAL Colour AFFPROCOLto Order

Finger ProtectaWide Blind 1925 mm 320mm SAA Silver AFFPROSAFWB

Finger ProtectaWide Blind 1925 mm 320mm Dark Bronze AFFPRODBWB

Finger ProtectaWide Blind 1925 mm 320mm White AFFPROWHTWB

Finger Protecta 1925 mm 320mm RAL Colour AFFPROCOLWBWide Blind to Order

> Availability

Page 31: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

31

FINGER DEFENDER - GL> Trade Name ASTRO FINGER DEFENDER - GLASS

> Product DescriptionAstro Finger Defender - Glass is a highquality finger guard designed exclusivelyfor use with glass doors.

It uses a resilient blind mounted in arobust aluminium housing that attachesto the door frame. The other end of theblind is fixed to the surface of the glassdoor via an aluminium strip with built-inacrylate-foam high performance tape.The tension in the blind prevents fingers

entering the hinge gap, where they maybe subject to trapping.

Independently tested to over 1 millionopening & closing cycles. Supplied withinstructions and all fixings.

Lengths: 1925 mm. Colours: SilverAnodised housing with black blindmaterial.

> Quick Overview

A finger guard exclusively for glass doors.For most single & double action doors.Suitable for manual or automated opening glassdoors.Prevents finger trapping accidents.Extremely durable and maintenance freeTested to over 1 million open & closing cyclesFits any door up to 180° openingImpact resistant aluminium housing.Silver Anodised Finish.Suitable for most single or double-action doors

All dimensions in mm Centre Pivot Glass Door fitted with dual finger guards.

> How to order this product

FOR EXAMPLE10 / ASTRO FINGER DEFENDER GLASS / AFFDEFSAFGL

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

ITEM COLOUR LENGTH PRODUCT CODEFinger Defender Glass Silver Anodized 1925 mm AFFDEFSAFGL

> Availability

Page 32: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

32

FINGER DEFENDER EXTERNAL> Trade Name ASTRO FINGER DEFENDER - EXTERNAL

> Product DescriptionAstro Finger Defender - External is ahigh quality finger guard for use withexternal doors subject to weatheringforces. The guard is resistant to: rain,snow, frost, foliage, dirt and UV lightwith an operating temperature range of-20 to +50 °C. This guard has anincreased wall thickness (compared tothe interior version) for extra durabilityand the blind material is designed forexternal use.

Surfaces are wipeable and easy to clean.The guard is attached by concealedfixings and is suitable for retrofitting.The tension in the blind prevents fingersentering the hinge gap, where they maybe subject to trapping. Supplied withinstructions and all fixings.

Lengths : 1925 mm. Colours: SatinAnodised Aluminium housing withAnthracite Grey (RAL 7016) blind fabric.

> Quick Overview

A weather-proof finger guard for exterior doorsTemperature range -20 to +50°CFor most single & double action doorsSuitable for manual or automated openingPrevents finger trapping accidentsExtremely durable and low maintenanceImpact resistant aluminium housingSilver Anodised Aluminium Finish

> How to order this product

FOR EXAMPLE10 / ASTRO FINGER DEFENDER EXTERNAL / AFFDEFSAFEXT

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

ITEM COLOUR LENGTH PRODUCT CODEFinger Defender External Silver Anodized 1925 mm AFFDEFSAFEXT

> Availability

ANTI-FINGER TRAPPING DEVICE FOR REAR OF DOOR

> Trade Name ASTRO FINGER SLIMGUARD REAR

> Product DescriptionSlimGuard is designed to prevent fingertrapping on the hinge pin side of thedoor (where the small gap is when thedoor is open). When used in conjunctionwith a front finger guard door hinges are100% covered. Supplied in 2 metrelengths that are cut to size and fittedabove, between and below hinges -

as illustrated in the drawing opposite.SlimGuard comes with pre-drilled,countersunk fixing points and with self-adhesive tape to aid fitting.Supplied in Satin Anodised Aluminium(SAA) finish only. Sold individually oravailable to order in any quantity in2000 mm lengths.

> Quick Overview

SlimGuard Rear shields the rear hinge gap of the doorRobust, effective, easy to install solutionAll Aluminium constructionFits like an extra long hingeCan be fitted to most single action doorsSuitable for manual or automated doorsCan be fitted to new doors and retrofitted to existingdoorsSold in 2000 mm lengthsDesigned for doors with standard 18mm diameterhinges> How to order this product

FOR EXAMPLE12 / ASTRO FINGER SLIMGUARD REAR/ AFFGSGR

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 33: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

33

CORNER GUARD SAFETY STRIP> Trade Name ASTRO CORNER GUARD COMMERCIAL

> Product DescriptionThe padded guard reduces impacts andprevents more serious injuries whenthere is a collision. Easily fitted usingsilicone sealant (MS-Polymer).

Manufacture using safe and childfriendly materials / safe toy standards.Designed for indoor use in normalhabitable conditions (frost free, dry, no prolonged direct sunlight). CornerGuards can be used outdoors but the lifeof the strips will be considerably reducedby exposure to the elements. Accordingto the security standard of toys (CNS47974797-3, 4798, 4798-1-3. 479-10-37),Comer Guard Strip meets the safe

requirement of structure, flameresistance and toxicology. Aging test(100°c, 70hrs) (CNS 3556):

1) Tensile Strength (kgf/cm):46.32) Elongation (%): 753) Tear Strength (kgf/cm): 10.6

Headspace: Do not detect TolueneBacteriostasis of Asperglllus Niger BCRC 31512: According to the evaluationstandard of Antifungal Test (ASTM G21-96), the resistant level of fungus is level 2. Horizontal burning foamedmaterial test: Corner Guard Strip meetsthe requirement of UL 94 HBF.

Prevents injuries caused by collision with sharppillar or wall edges.Can be used on almost all corners and edges ofwalls, windowsills, radiators, table corners etc.Suitable for use on any even and smooth interiorsurface.Strip dimensions 1000 x 58 x 58mmUrethane padding is 15mm thick.Safe, durable and quality guaranteed.Flame retardant & waterproofBacteriostasis propertiesContains no toluene or heavy metals.Certified per ST safe toys requirementsManufactured with an integral urethane skinHighly durable - resistant to shocks and scrapesQuick & Easy to install

> Quick Overview

> How to order this product

FOR EXAMPLE10 / ASTRO CORNER GUARD COMMERCIAL / AFCGR

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

ITEM COLOUR LENGTH [MM] PRODUCT REFCorner Guard Commercial RED 1000 AFCGCRCorner Guard Commercial YELLOW 1000 AFCGCYCorner Guard Commercial BLUE 1000 AFCGCBCorner Guard Commercial IVORY 1000 AFCGCICorner Guard Commercial GREY 1000 AFCGCG

> AvailabilityAvailable in various colours. All strips are 1000 x 58 x 58 mm. Packed - Individually.

> Available Colours

Red Yellow Blue IvoryGrey

Page 34: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

34

REFLECTIVE SAFETY PADDING STRIP> Trade Name ASTRO CORNER GUARD INDUSTRIAL

> Product DescriptionA reflective corner guard used as protectivecushioning on corners and hard edges ofbuildings to prevent damage to or fromvehicles. Typical applications are carparks, loading bays and warehouses.Corner Guard Industrial padding has analuminium 'spine' which further reducesthe risk of damage to property andvehicles. Strips are in the universalhazard colours of black with a reflectiveyellow stripe to get the attention ofvehicle users. Quick and easy to installand needing no special maintenance.

Reflective Corner Guard Industrial is suitable for use on corners found: in car parks and loadingbays in work areas where vehicles are activein many buildings and public areasResists knocks and scrapesHighly reflective - drawing peoples attention in order to help prevent a collisionQuick and easy to install18mm thick paddingStrip dimensions 1000 x 95 x 95mmAluminium strip, to increase strength and cushioningeffect, enclosed in integral Skin Urethane.Reflective tapes cover the corner guard strip.Supplied pre-drilled and with fixing bolts and caps

> Quick Overview

> How to order this product

FOR EXAMPLE10 / ASTRO CORNER GUARD INDUSTRIAL / AFCGIND

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

ITEM COLOUR LENGTH [MM] PRODUCT REFCorner Guard Industrial Black / Yellow 1000 AFCGIND

> AvailabilityAvailable in Black with Yellow reflective tape (ask about other colour combinations). Allstrips are 1000 x 95 x 95mm.

TRANSPARENT CORNER GUARD SAFETY STRIP

> Trade Name ASTRO CORNER GUARD CLEAR

> Product DescriptionThe padded guard reduces impacts andprevents more serious injuries when thereis a collision. Easily fitted using built in selfadhesive strips - can be augmented withscrews (see install data). Designed forindoor use in normal habitable conditions(frost free, dry, no prolonged direct sunlight).

Prevents injuries caused by collision with sharppillar or wall edges.Can be used on almost all corners and edges ofwalls, windowsills, radiators, table corners etc.Suitable for use on any even & smooth interior surface.Strip dimensions 1000 x 15 x 15mmScratch and scuff resistant.Self adhesive fitting - but can be augmented with screws. Can be cut to shorter lengthsOperating temperature range -10° to 110° CManufactured from Themoplastic Elastomers (TPE)

> Quick Overview

> How to order this product

FOR EXAMPLE10 / ASTRO CORNER GUARD CLEAR / AFCGCL

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

ITEM COLOUR LENGTH [MM] PRODUCT REFCorner Guard Clear TRANSPARENT 1000 AFCGCL

> AvailabilityAvailable in transparent clear. All strips are 1000 x 15 x 15mm.

Page 35: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

35

INTUMESCENT PIPE COLLARS> Trade Name ASTRO COLLAR

> Product DescriptionOur intumescent pipe collars aremanufactured from a high performancematerial bonded to the inside of a steelsleeve. On exposure to heat from a firethey rapidly expand inwards to squeeze thecollapsing plastic pipe until the aperture iscompletely sealed. Pipe collars are tested in accordance with the performancerequirements of BS476: Part 20: 1987.Astro E Collar can provide 2 hour fire

resistance. Astro P Collar offers up to 4hour resistance. The pipe collars are lightand compact, easy to install, maintenancefree and find uses in multi-storey officebuildings, flat level developments, hospitalsand hotels. Suitable for use and anywhereplastic soil and waste pipes pass throughfire compartment walls and floors. Alsotested to EN1366-3, NHBC Type Approvaland IFC Approval.

> How to order this product

FOR EXAMPLE10 / ASTROCOLLAR / AFPC55/2E / 55MM / 2HOUR

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / SIZE / RATING

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

> AvailabilityThe Astroflame Pipe Collar range is available in standard sizes, to suit 55, 82, 110, 160& 200 mm diameter pipes, and includes intermediate and larger sizes.

Intumescent Pipe Collars tested toBS476: Part 20: 1987 EN1366-3For use on UPVC,ABS, MDPE, HDPEand PP pipesUp to 4 hours fire resistanceSurface mounted, cast or semi-castapplicationsNHBC Type ApprovalIFC Approval

> Quick OverviewSIZE PRODUCT REF32mm AFPC32/4P40mm AFPC40/4P55mm AFPC/55/4P63mm AFPC63/4P75mm AFPC75/4P82mm AFPC82/4P90mm AFPC90/4P110mm AFPC110/4P125mm AFPC125/4P160mm AFPC160/4P200mm AFPC200/4P225mm AFPC225/4P250mm AFPC250/4P

SIZE PRODUCT REF55mm AFPC55/2E110mm AFPC110/2E125mm AFPC125/2E355mm AFPC355/2E

4 Hour 2 Hour

SIZE PRODUCT REF275mm AFPC275/3E300mm AFPC300/3E315mm AFPC315/3E

3 Hour

Page 36: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

36

INTUMESCENT PIPE WRAPS> Trade Name ASTROWRAP

> Product DescriptionIntumescent pipe wraps for fire stoppingall types of plastic pipes passing throughmasonry floors and walls. The wraps have been independently fire tested to EN 1366-3 and BS 476 giving a fireresistance of up to 4 hours. Tested in block,concrete and masonry walls and concretefloors. Designed to provide high volumeexpansion and pressure seal using anintumescent composition based onelastomeric thermoplastic polymers andbinders. On exposure to fire the pipe wrapexpands rapidly inwards to squeeze thecollapsing plastic pipe until the aperture is completely sealed. Tested with pipes up to 200mm diameter including PVC,Polypropylene, MDPE, HDPE, HPPE andABS types. Causes no known adverseeffects to plastic pipes, plastic cables,sheathing or metallic components.

Tested in large service openings up to 250x 150mm. Astroflame Intumescent PipeWraps are economical, unaffected bymoisture, humidity or frost and easy to fit,but care should be taken when fitting toavoid damaging the outer polythene sleeve.The product is based on an thermoplasticcomposite and is non-toxic, Halogen free,contains no asbestos, ceramic, mineralfibres and is environmentally friendly. Notaffected by fungus, vermin or rodents.

Specification & PropertiesPipe Diameter Sizes: 28mm, 32mm, 55mm,63mm, 75mm, 82mm, 90mm, 110mm,125mm, 160mm or 200mm (other sizes on request) Width (Nominal): 60mmThickness (Nominal): 3.5mm up to 63mm :6mm up to 110mm : 9.5mm over 110mmFire Resistance: Up to 4 hours BS 476 part 20 & EN1366–3: 2004

> How to order this product

FOR EXAMPLE10 / ASTROWRAP / AFIPW55/2E / 55MM / 2HOUR

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / SIZE / RATING

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

SIZE PRODUCT REF32mm AFIPW32/440mm AFIPW40/455mm AFIPW55/463mm AFIPW63/475mm AFIPW75/482mm AFIPW82/490mm AFIPW90/4110mm AFIPW110/4125mm AFIPW125/4160mm AFIPW160/4

> AvailabilityAstroflame Pipe Wraps come available in many standard sizes to suit eg. 55, 82, 110,and 160mm diameter pipes with either 2hr or up to 4 hour fire resistance. Please note:pipe wraps for 200mm diameter pipes are 2 hour rated.

Intumescent Pipe Wraps for PVC,Polypropylene, MDPE, HDPE, HPPE and ABS pipes up to 200mm.Fire resistance testing to EN 1366-3 EI 120,and BS 476 240mins.Suitable for wall and floor installation.Tested in Block Wall, Concrete & Masonry.Tested in Concrete Floors.Tested in large service openings up to 250 x 150mm.Remains flexible between -40°C to +130°C.Long life and is easy to use.Certifire 3rd Party Accreditation.NHBC Type Approval.

> Quick Overview

PIPE TYPE SIZE RANGE INTEGRITY INSULATIONPVC 55mm - 200mm 240 minutes 240 minutesPE 55mm - 160mm 240 minutes 240 minutesABS 55mm - 160mm 240 minutes 240 minutesPVC 28mm - 110mm 180 minutes 180 minutesHDPE 28mm - 110mm 240 minutes 240 minutesMDPE 28mm - 90mm 240 minutes 240 minutesABS 28mm - 160mm 240 minutes 240 minutes

SIZE PRODUCT REF110mm AFIPW110/2200mm AFIPW200/2

4 Hour 2 Hour

Page 37: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

37

THERMAL FIRE PIPE SLEEVE> Trade Name ASTRO THERMAL FIRE PS

> Product DescriptionA high percentage of the steel, copper andplastic pipes found in commercial and domesticbuildings will penetrate through fire ratedconstructions such as ceilings, floors and walls.Once a hole is made in a fire rated constructionfor the passage of pipes or services the integrityof the compartment is compromised. To solvethis problem Astroflame have a developedAstro Thermal Fire Pipe Sleeve, which reinstatesthe fire rating of the construction and preventsfire spreading from one compartment toanother. In a fire situation the sleeve expands to

fill the available space between the pipe andthe penetration. In the case of plastic pipes thesleeve will crush and close off the pipe forminga solid char and preventing the passage of fireand smoke to the adjacent compartment.Tested in Plasterboard Partition, Mineral FibreBatt, Solid Walls and Floors. All sleeves havebeen tested with a 25mm nominal wall thickness.Sleeves have been tested cut flush to the wallfor metal pipes only and floor for metal andplastic pipes. Sleeves have also been tested inwalls, for plastic pipes, leaving 25mm exposed.

> How to order this product

FOR EXAMPLE10 / ASTROTHERMAL FIRE PS / AFIPS17/2E / 17MM / 2HOUR

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / SIZE / RATING

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

DIAMETER CODE DIAMETER CODE17mm AFIPS17/2E 80mm AFIPS80/2E21mm AFIPS21/2E 89mm AFIPS89/2E27mm AFIPS27/2E 102mm AFIPS102/2E34mm AFIPS34/2E 108mm AFIPS108/2E42mm AFIPS42/2E 114mm AFIPS114/2E48mm AFIPS48/2E 140mm AFIPS140/2E54mm AFIPS54/2E 127mm AFIPS127/2E60mm AFIPS60/2E 159mm AFIPS159/2E67mm AFIPS67/2E 169mm AFIPS169 /2E76mm AFIPS76/2E

> Availability2Hr Rated Pipe Sleeves Length 300mm. Wall thickness 27mm.

Suitable for fire protecting a wide rangeof plastic and metal pipes.Tested to BS476: Part 20Tested to BS EN 1366-32 Hours plus Fire RatedAcoustic Tested to BSEN ISO 140-3 and BSEN ISO 717Maintains thermal insulation for the pipeFor use through a wide range of firepartition walls and floors.Allows for thermal movement of pipeNHBC Type Approval.

> Quick Overview

ACOUSTICRATED

PIPE MAT DIAMETER BLOCK WALL SOLID FLOOR MINERAL BATT PLASTERBOARDCOPPER 15 - 160mm • • •CAST IRON 15 - 160mm • •MILD STEEL 15 - 160mm • • •STAINLESS STEEL 15 - 160mm • • •POLYBUTYLENE 12mm • • • •POLYBUTYLENE 28mm • • • •PVC 55 - 110mm • • • •PVC 160 • • •PVC-U 15 - 160mm • • •HDPE 15m - 160mm •* • •*

> Test Matrix - BS 476 and / or BS EN 1366-3 for 120mins

* HDPE 160mm limited to EI90. See website for full specifications or please contact us

Copper 12 - 160mm 2 hoursStainless Steel 15 - 160mm 2 hoursMild Steel 15 - 165mm 2 hoursCast Iron 15 - 160mm 2 hoursPVC 55 - 110mm 2 hoursPVC 160mm 90 minsPolybutylene 12 - 28mm 2 hoursHDPE 15 - 160mm 2 hours

BS 476 part 20

> TestingTested on the following pipe sizes to BS476 Part 20 and BS EN 1366-3 for up to 2 hours.

Metal 15 - 158mm EI 120 WallMetal 159mm E120 EI30 WallPVC 43 - 160mm EI 120 min wall & floorHDPE 40 - 110mm 120 min wall & floorHDPE 160mm EI 90 wall / EI 120

floor

EN 1366-3

All sleeves have been tested with a 25mm nominalwall thickness. Sleeves have been tested cut flushto the wall for metal pipes only and floor for metaland plastic pipes. Sleeves have also been tested inwalls, for plastic pipes, leaving 25mm exposed forconnection to standard pipe insulation.

The sleeve is simple to install, easy to cut and onesleeve can replace two collars. For metal pipes thesleeve may also be fitted flush to the wall for aclean line solution.

Page 38: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

38

THERMAL DEFENSE WRAP> Trade Name ASTRO TDW

> Product DescriptionThermal Defense Wrap prevents thepassage of fire and smoke between firerated compartments where there is aservice penetration. It is an easy to useproduct designed to maintain necessaryinsulation on services and preventtemperature rise of service on the coldface. The wrap remains flexible at normaltemperatures to permit thermal andmechanical movement of the serviceswithout causing cable to overheat anddeteriorate. It causes no known adverseeffects to plastic pipes, plastic cables,sheathing or metallic components. ThermalDefense Wrap is based on ceramictechnology with bio-soluble, vitreous fibres and flexible organic binders that will maintain compartmentalization for up to 2 hours. Tested in concrete floors.Tested in large service openings. Highly

flexible and water resistant. Halogen free,resists fungi and vermin. For installation a300mm length is required on each side ofthe service.

SpecificationDimensions: 6mm thicknessSheet Size: 300mm wide x 1000mm long x 6mmWe can supply in different roll sizes or cutto size. Density: 180Kg/m³ - 250Kg/m³Colour: White & Silver. Alufoil Thickness:0.25mm Nominal. Fire Resistance: 2 hours– EN1366:3 2009. Fire Classification:EN13501-2. Suitability: Cables, MetallicPipes, Cable Trays, Cable LaddersUse: Can be used around Armaflex typeproducts.

Fire resistant wrap for pipes and cables.Fire resistance testing to EN 1366-3 EI 120.Fire Classification to EN 13501-2.Tested in block wall, concrete, masonry& plasterboard partition.Tested in concrete floors.Tested in large service openings.Tested with metallic pipes, cables, cablebunches, cable trays and cable ladders.Remains flexible between -10 to +160°C.Continued flexibility without ageing.Quick and easy to install.Easy to wrap, shape and cut.High level of insulation, hightemperature stability.Certifire 3rd Party Accreditation

> Quick Overview

NAME DIMENSIONS PRODUCT CODEAstro TDW 300mm wide x 1000mm long x 6mm AFTDWAstro TDW Customer Specified ---

> Availability

> How to order this product

FOR EXAMPLE10 / ASTRO THERMAL DEFENSE WRAP / AFTDW

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 39: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

39

INTUMESCENT FIRE PILLOWS> Trade Name ASTRO PILLOW

> Product DescriptionOur fire pillows are manufactured from a hardwearing specially treated glass cloth filled with amixture of mineral fibre and reactive expansion(intumescent) agents. On exposure to hightemperatures from a fire the intumescentmaterial expands and then hardens to provide acomplete and durable seal against the passageof fire, smoke and hot gases. Intumescent FirePillows can be used for creating either temporaryor permanent fire barriers and are ideal forsealing cable trays and ducts that penetrate fire resistance structures. Suitable for use in

telephone exchanges, computer rooms andother areas where cable services are frequentlymodified. Suitable for the sealing of CableTrunkings, Small, Medium and Large Cables,Cable Trays, Cable Ladders and Metallic Pipes.Installation types: These intumescent pillowshave been independently tested in accordancewith BS476: Part 20: 1987 and can provide up to4 hours fire integrity. Also tested to EN1366-3,NHBC Type Approval. They contain no asbestosor halogens. Penetrations up to 600mm2 - 4 hrs and up to 1000mm2 2 hrs fire resistance.

Fire Pillows tested to BS476: Part 20: 1987EN1366-3 EI120EN13501-2 Fire Resistance ClassificationEN1026 Air PermeabilityEN10140 Acoustic ReductionUp to 4 hours fire integrityAvailable in 4 standard sizesEasy to install & re-locateRemovable for re-useFor wall floor & ceiling penetrationsDustproof - safe for the work environmentProtects cable trays & ductsNHBC Type Approval.Certifire Approval

> Quick Overview

SIZE /TYPE DIMENSIONS PRODUCT CODELarge 300mm x 200mm x 40mm AFFPLMedium 300mm x 150mm x 40mm AFFPMSmall 300mm x 100mm x 40mm AFFPSSausage 300mm x 50mm x 40mm AFFPSAS

> AvailabilityAvailable in 4 standard sizes to enable effective sealing in whatever size or shape ofopening either in walls or floors.

> How to order this product

FOR EXAMPLE5/ ASTRO PILLOW / AFFPL / LARGE

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / SIZE

FIRE PILLOWS X-SERIES> Trade Name ASTRO X-SERIES PILLOW

> Product DescriptionX-Series Fire Pillows are designed to provide an effective fire barrier, on a temporary orpermanent basis, for services which are subjectto frequent changes or replacement. The firepillows consist of a waterproof glass cloth bagcontaining organic fillers and intumescentadditives. Pillows can be added, removed orrearranged in an aperture to accommodate tothe needs of the situation and have beentested with metallic pipes, cables, cablebunches, cable trays and cable ladders.

Tested in block wall, concrete and masonry wallsand concrete floors up to 1m² area and suitablefor indoor and outdoor locations pillows remainflexible between –20°C to +130°C. Non-toxic,easy to install and with a 25 year lifespan. Threesizes of X-Series fire pillow are available; pleaseensure that the correct pillow is installed to suitthe opening size. Sizes and CodesLarge AFFPLX - 330mm x 200mm x 45mmSmallAFFPSX - 330mm x 200mm x x25mmSausage AFFPSASX - 330mm x x50mm x 20mm

Fire Pillows tested with metallic pipes, cables,cable bunches, cable trays and cable ladders.Fire Resistance EN 1366-3 EI 120 and BS 476 - 240mins.Fire Classification EN13501-2.IET (IEE) 17th Edition Fire Stop Compliant toRegulation 527.1-3 - Electrical Installations.BS 7671-2008 Chapter 42 & 52 - ElectricalInstallations Fire Resistance.Acoustic Isolation EN10140 - 46dB.Air Permeability EN1026 - 420Pa.Reaction Temperature 180°C.Expansion of 200%.

> Quick Overview

> How to order this product

FOR EXAMPLE5/ ASTRO PILLOW / AFFPLX / LARGE

PLEASE QUOTEQUANTITY/TRADE NAME / PRODUCT REF / SIZE

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 40: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

40

FIRE STOP BLOCK> Trade Name ASTRO FS BLOCK

> Product DescriptionFire Stop Block is a unique, compressibleand fully intumescent alternative to firepillows. FS Block can be supplied in up to 1 metre lengths and can be cut to size on

Tested to BS EN 1363-1:1999 for up to 2 hoursCompressible material for simpler installationOnly min. 10% compression requiredCan be cut to any required length(s).Red coating provides easy recognitionEasy to add and removeSquare edges are easy to stackNo overlapping required - lower costCan be installed from one side150mm length can provide a clean wall solutionEI120 on up to 100x100mm PVC TrunkingEI120 on up to 150x150mm Steel TrunkingE120 on Cable Basket and various Cable Types

> Quick Overview

NAME DIMENSIONS PRODUCT CODEAstro FS Block 30.0 x 150.0 x 1000mm AFFSBLOCK

> AvailabilityAvailable in 1 metre lengths in any quantity.

> How to order this product

FOR EXAMPLE10 / ASTRO FS BLOCK/ AFFSBLOCK

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

site. This ensures maximum flexibility andminimum wastage. The material can beinstalled within and around various electricalpenetrations and provides up to 120minutes fire rating.

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

SEE OUR FINGER PROTECTIONSECTION ON PAGE 24 FOR THEFULL RANGE OF PRODUCTS, ORVIEW WWW.ASTROFLAME.COMAND CLICK FINGER PROTECTION

FOR FINGER PROTECTION THINK...

ASTROFLAMEM A N U F A C T U R E R S O F PA S S I V E F I R E S T O P P R O D U C T S

Every year over 30,000 children are injured in the UK as a result of trapping their fingers in doors

ROSPA STATISTIC

Page 41: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

41

FIRE RATED CEILING AIR VALVES> Trade Name ASTRO FR CEILING VALVE

> Product DescriptionThe popularity of whole house ventilation andcontrolled ventilation is increasing. This resultsin an increased number of penetrations throughfire compartment walls and floors producing openpathways for the passage of both smoke andfire. Recessed ceiling air valves are now widelyused in both domestic and commercial buildings.Ceilings must be fire protected in accordance withApproved Document B of the Building Regulations.Ceiling air valves, if left unprotected, allow a fireto spread rapidly through a building.

Fire rated ceiling air valves - supply and extract types.Maintains integrity of fire rated ceilings for up to one hour.Tested for 60 minutes to BS EN 1365-2Meets the requirements of Building RegulationsDocument BAn alternative to more expensive metal Fire RatedValves / Fire DampersFits in the same way as a normal air valveAir Flow is unaffected by fire resistant insertsEasy to retro-fit in place of existing valvesAvailable in 80mm, 100mm, 125mm, 150mm and200mm diameter in extract or supply versions.

> Quick Overview

> How to order this product

FOR EXAMPLE8NO / ASTRO FR CEILING VALVE / SUPPLY / 125 / AFFRCV125S

PLEASE QUOTEQTY / TRADENAME / TYPE / DIAMETER / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Once a hole is made in a ceiling for an air valve,the integrity of the construction and its abilityto perform in a fire is reduced significantly. Thisopening must firestopped to reinstated theoriginal fire rating of the ceiling. Our fire ratedceiling air valve performs this fire stoppingfunction when activated by the heat of a fireIf air valves are to be fitted to a ceiling wherethe downlights are fire rated then you need firerated ceiling air valves.

ITEM DIAMETER PRODUCT REFEXTRACT VALVE - 60 Min Fire RatedSMALL 80mm AFFRCV80EMEDIUM 100mm AFFRCV100ELARGE 125mm AFFRCV125EX LARGE 150mm AFFRCV150EXX LARGE 200mm AFFRCV200ESUPPLY VALVE - 60 Min Fire RatedSMALL 80mm AFFRCV80SMEDIUM 100mm AFFRCV100SLARGE 125mm AFFRCV125SX LARGE 150mm AFFRCV150SXX LARGE 200mm AFFRCV200S

> Availability

Page 42: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

42

FIRE RATED VENT SLEEVE> Trade Name ASTRO ACOUSTIC VENT SLEEVE

> Product DescriptionRecessed ceiling fans and ventilation ducts arewidely used in both domestic and commercialbuildings and the use of forced / controlledventilation is increasing because it can be moreenergy efficient than traditional ventilationmethods. Centralised ventilation units and heatrecovery units result in a building having bothhorizontal and vertical penetration holesthrough the structure, creating pathways forthe passage of fire and smoke. Once a hole ismade in the ceiling for a polymeric fan or vent,the integrity of the construction and its abilityto perform in a fire is reduced significantly.

A fire rated Vent Sleeve for ventilation ducts.Restores and maintains integrity of 30 & 60minute fire rated ceilingsProvides an effective acoustic barrierbetween fan / vent and ceilingEasy to retro fit into existing fans / ventsLightweight and can be fitted from above or below the ceilingInvisible once fan / vent is fitted80mm and 100mm diameter sizes available

> Quick Overview

> How to order this product

FOR EXAMPLE10 / ASTRO ACOUSTIC VENT SLEEVE / 100 / AFAVS100

PLEASE QUOTEQTY / TRADENAME / SIZE / PRODUCT REF

Ceilings subject to fire regulations must be fireprotected in accordance with ApprovedDocument B of the Building Regulations. Anyvent opening must be fire stopped to reinstatethe original fire rating of the ceiling. Unlike downlights, which are generally all fire protected, fansand vents are often left unprotected. A 100mmdiameter fan or vent has several times the openarea of a down light and lacks a metal “can” toslow the spread of fire. This, coupled with theability of the fire to move all around the buildingvia the ventilation system, makes it ever moreimportant to fire protect ceiling mounted fansand vents. Available in singles or boxes of 10.

ITEM DIAMETER PRODUCT REF CUT OUTAcoustic vent sleeve 80 AFAVS80 110mmAcoustic vent sleeve 100 AFAVS100 127mmAcoustic vent sleeve 125 AFAVS125 167mmAcoustic vent sleeve 150 AFAVS150 202mm

> Availability

ACOUSTICRATED

INTUMESCENT DUCT SLEEVE> Trade Name ASTRO DS DUCT SLEEVE

> Product DescriptionThe Astroflame range of Astro DS duct sleevesare intended for use where a ventilation ductpasses through a fire rated wall. The sleevemaintains the integrity of the fire rated wallwhich would otherwise be lost. In the eventof a fire, the advanced Astro DS Duct Sleeve

Duct sleeve with 2 hr rating to BS 476 & EN1366-3:2009Uncapped / Uncapped (Open | Open) firetested as required for ventilation systems.Suitable for use through a wide range of firepartition wallsOffers excellent acoustic insulationMaintains the thermal insulation of the ductthrough the penetrationMaintains vapour seal of existing insulationSleeve can be easily fitted only requiringaccess from one sideAllows the thermal movement of the ductSimple to install without special tools or skills

> Quick Overview

> How to order this product

FOR EXAMPLE10 / ASTRO DS DUCT SLEEVE / AFDS204 / 204MM

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / SIZE

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

will expand with the heat, crushing the ductand closing off the hole to the fire for at least2 hours except the 220x90mm version whichis rated 60mins. The Ventilation duct sleevesare available to fit all common sizes of plasticventilation duct and are suitable for retrofitting with access only required from one side.

ITEM WIDTH [MM] HEIGHT [MM] LENGTH [MM] PRODUCT REFDuct Sleeve 110 54 180 AFDS110Duct Sleeve 150 70 180 AFDS150Duct Sleeve 204 60 180 AFDS204Duct Sleeve 220 90 180 AFDS22090Duct Sleeve 234 29 180 AFDS235Duct Sleeve 308 29 180 AFDS308Duct Sleeve Circular 103 Di 150 AFDSC100XDuct Sleeve Circular 127 Di 280 AFDSC127XDuct Sleeve Circular 159 Di 180 AFDSC159X

> Availability

ACOUSTICRATED

Page 43: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

43

INTUMESCENT DUCT WRAP> Trade Name ASTRO DUCT WRAP

> Product DescriptionDuct wraps designed to provide simpleand effective fire resistance for up to 2hours to plastic vent ducting penetrations.These duct wraps provide 120 minutesintegrity and insulation protection havingbeen fire tested in an Open/Openpipe/duct end configuration, to the mostonerous requirements of EN 1366-3.Installation is straightforward due to thefour segment design and slide into the Duct Wraps Tested to EN1366-3

European Fire Resistance Classification:EI120 minutes (Integrity & Insulation)Wraps provide up to 2 Hr Integrity &Insulation to rectangular PVC ventilationducting penetrations.Simple & quick to installLow profile design allows installation closesoffitAvailable to fit most common vent duct sizesOnly one wrap needed per penetrationTested to EN1366-3 in Plasterboard usingsteel sleeves

> Quick Overview

> How to order this product

FOR EXAMPLE10/ASTRO DUCT WRAP / AFIDW110/110MM/2HOUR

PLEASE QUOTEQUANTITY /TRADE NAME/PRODUCT REF/SIZE/RATING

wall construction. Supplied in varioussizes to suit all common plastic vent ductdimensions. Wraps are either 4mm or8mm thick - check table below foravailable wrap sizes. When fitted within a galvanised steel outer sleeve the ductwraps are suitable for penetrationsthrough plasterboard partitions. 100mmcircular wrap for plastic vent pipes.For information about our Steel Sleeveplease contact us or view our website.

CODE WRAP SIZE WRAP THICKNESSAFIDW110 110mm x 54mm 4mmAFIDW150 150mm x 70mm 8mmAFIDW180 180mm x 90mm 8mmAFIDW204 204mm x 60mm 8mmAFIDW234 234mm x 29mm 4mmAFIDW308 308mm x 29mm 4mmAFIDWC100X Circular 100mm Di 8mm

> Availability

INTUMESCENT FIRE TRUNKING SLEEVE> Trade Name ASTRO FT SLEEVE

> Product DescriptionThe Astroflame range of Astro FT FireTrunking Sleeves are intended for usewhere plastic trunking passes through afire rated wall. The sleeve reinstates thefire rating of the wall which wouldotherwise be lost. In the event of a fire, theAstro FT Trunk Sleeve expands with theheat, crushing the trunking and closingoff the hole to the fire for at least 2 hours.

Fire Trunking Sleeve with a 2 Hour fire ratingto BS 476.Suitable for use through a wide range of firepartition walls and floors.Offers excellent acoustic insulation.Maintains the thermal insulation of thetrunking through the penetration.Cost effective solution.Fitting only requires access from one side.Can also be fitted flush to the wall offering a clean wall solution.

> Quick Overview

> How to order this product

FOR EXAMPLE6NO / ASTRO FIRE TRUNKING SLEEVE / 50MM / AFFTS50

PLEASE QUOTEQUANTITY / TRADE NAME / SIZE / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

The FT Trunk Sleeves are available to fitcommon sizes of plastic trunking and aresuitable for retro fitting with access onlyrequired from one side. They are suitablefor use with plastic trunking or can beused with cabling passed directly throughthe sleeve. 25mm thick wall

ITEM WIDTH [MM] HEIGHT [MM] LENGTH [MM] PRODUCT REFFiretrunk Sleeve 50 50 150 AFFTS50Firetrunk Sleeve 100 100 150 AFFTS100

> Availability

ACOUSTICRATED

Page 44: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

44

INTUMESCENT CABLE TRAY SLEEVE> Trade Name ASTRO CT SLEEVE

> Product DescriptionThe Astroflame range of Astro CT CableTray Sleeves are intended for use where acable tray passes through a fire rated wallor floor. The sleeve reinstates the firerating of the wall or floor which wouldotherwise be lost. In the event of a fire,

2 Hour fire rating to BS 476Suitable for use through a wide range of firepartition walls and floorsOffers excellent acoustic insulationMaintains the thermal insulation of the wall or floorCost effective: easily cut to minimize wastage,nomastic or foam is required, reducing on site timeSimple to install without special tools or skillsSleeve can be easily fitted only requiring accessfrom one sideSuitable for retro fittingAllows thermal movement

> Quick Overview

> How to order this product

FOR EXAMPLE6NO ASTRO CABLE TRAY SLEEVE / AFCTS125 / 125MM

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / SIZE

the advanced Astro CT Cable Tray Sleevewill expand with the heat, closing off anyholes or gaps to the fire for at least 2hours. The Fire Cable Tray Sleeves areavailable to fit all cable tray sizes

ACOUSTICRATED

ITEM TRAY WIDTH [MM] SLEEVE WIDTH [MM] LENGTH [MM] PRODUCT CODECT Cable Sleeve 50 100 150 AFCT100CT Cable Sleeve 75 125 150 AFCT125CT Cable Sleeve 100 150 150 AFCT150CT Cable Sleeve 150 200 150 AFCT200CT Cable Sleeve 225 275 150 AFCT275CT Cable Sleeve 300 350 150 AFCT350CT Cable Sleeve 450 500 150 AFCT500

> Availability

INTUMESCENT FIRE & ACOUSTIC INTERNAL SOCKET BOX INSERT

> Trade Name ASTRO FRA SOCKET BOX INSERT

> Product DescriptionSocket Box Inserts are used to restore the firerating of a wall otherwise compromised byapertures and gaps following the fitting ofsocket boxes. This design also restores theacoustic and thermal performance of the walland its air-tightness. Inserts are quick andeasy to fit in comparison with traditional puttypads. Once a hole is made in the wall for arecessed switch or socket box, the integrity ofthe construction and its ability to perform in afire can be significantly reduced. The acousticperformance of the wall is also affected and airleakage will increase. Air leakage allows heatloss and noise transmission. A single socketcan leak over 3.5 cubic metres of air per hourand the combined air leakage of all the socketsin a room can create significant thermal loss.

Easy to install putty pad alternative.Single and Double socket sizes available.Tested to BS EN 1366-1 | 13664-2 for up to 120 mins.Provides an effective acoustic barrier to bothimpact and airborne sounds.Maintains the fire protection performance of thewall - preventing or delaying the spread of fire.Prevents or delays fire from entering a wallcavity and attacking the building structure.Simple and fast mechanical fixing, noadhesives, no mess.Replaces time consuming plasterboard lining of sockets / switchesUnique flanged design holds the socket boxinsert in place during a fireAir leakage tested to BS EN 1026:2000 over apressure range of 2-50 Pa.Acoustic Tested to BSEN ISO 140-3 and BSEN ISO 717

> Quick Overview

> How to order this product

FOR EXAMPLE10 / ASTRO FRA SOCKET BOX INSERT / SINGLE / AFFRASOCSIN

PLEASE QUOTEQTY / TRADE NAME / SIZE / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

A correctly fitted insert can almost match theperformance of an unpenetrated wall. Thematerial used to construct the socket insert is agood insulator, which further prevents heatloss and maintain insulation continuity of thewall. Acoustic performance is good, being ratedat -67dB. The socket box inserts are quicker andeasier to fit that traditional putty pads. In a firethe inserts flanged design ensures that the fireresistant material remains in place to limit thespread of fire through the socket penetration.Astro FRA Socket Box Inserts are designed tofit common plastic / metal single / doublesocket box sizes. To order Extra Deep (47mmdeep) add X to end of product code.CodesSingle AFFRASOCSIN Double AFFRASOCDIN

ACOUSTICRATED

Page 45: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

45

INTUMESCENT FIRE & ACOUSTIC SOCKET BOX COVER

> Trade Name ASTRO FRA SOCKET BOX COVER

> Product DescriptionSwitch boxes, in walls subject to fire regulations,must be correctly fire protected. Once a hole ismade in the wall for a recessed switch or socketbox, the fire integrity of the construction iscompromised. In addition the wall's capacity to provide an effective acoustic and thermalbarrier is impaired. For timber framed buildingspreventing a fire from entering wall cavitiesand attacking the structure is critical to theoverall fire integrity of the building. To combatthese fire risks Astroflame has developed apre-formed socket / switch box cover to providefire and acoustic protection as an easy fitalternative to conventional putty pads. Thisone-piece socket box is available in sizes tosuit most common single & double electricalboxes and restores and maintain fire insulationand integrity in plasterboard walls for up to

Easy to install putty pad alternative. Pre-formed covers to fit most electrical switch boxesTested to BS 476 Part 20 for up to 120 mins.Tested to & BS EN 1366-3 60 minutesPrevents or delays fire from entering a wallcavity and attacking the building structure.Simple and fast mechanical fixing, noadhesives, screws, drilling or mess.Replaces time consuming plasterboard liningof sockets / switches.Can be retro fitted to existing sockets /switches or fitted during wall construction.The switch / socket box can be removedwithout disturbing or replacing the cover.Effective acoustic barrier to both impact andairborne sounds. Acoustic Rating up to -67 dB.

> Quick Overview

> How to order this product

FOR EXAMPLE10 / ASTRO FRA SOCKET BOX COVER / SINGLE / AFFRASOCS

PLEASE QUOTEQTY / TRADE NAME / SIZE / PRODUCT REF

120 minutes. In a fire the cover expands, fillingall of the available space with a fire resistanthighly insulating char. The fire is unable topenetrate the aperture and the socket cover isable to give additional insulation protection tothe wall void by reducing the chance of heatbuild up leading to the ignition of flammablestructural members. In a wall with two layersof plasterboard on each face, the ends of thefixing wires can be pushed between theplasterboard layers.

The Socket Cover also reduces the transmissionof noise and has a certified acoustic rating.Single size cover dimensions: 90mm x 90mm x 50mm deep - AFFRASOCSDouble size cover dimensions: 160mm x 90mm x 50mm deep - AFFRASOCD

INTUMESCENT FIRE & ACOUSTIC CABLE BASKET SLEEVE

> Trade Name ASTRO CB SLEEVE

> Product DescriptionThe Astroflame range of Intumescent Fire &Acoustic Cable Basket Sleeves is intended for usewhere a cable basket passes through a fire ratedwall or floor. The sleeve reinstates the fire ratingof the wall or floor which would otherwise be

2 Hour fire rating to BS 476Acoustically Tested to BS EN ISO 140-3:1995 and BS EN ISO 717-1:1997No metal sleeving requiredSuitable for use through a wide range of firepartition walls and floorsSleeve can be fitted prior to running cablesAvailable to fit all common cable basket sizesSuitable for retro fittingAllows thermal movement

> Quick Overview

> How to order this product

FOR EXAMPLE6NO ASTRO CABLE BASKET SLEEVE / AFCBS100 /100MM

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / SIZE

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

degraded. The compressible and fully intumescentmaterial provides an effective fire and acousticseal around both the cables and the cable basketitself. In the event of a fire, the advanced cablebasket sleeve will expand with the heat, closingoff any holes or gaps to the fire for at least 2 hours.

ACOUSTICRATED

DESCRIPTION CABLE BASKET SLEEVE LENGTH [MM] PRODUCT WIDTH [MM] WIDTH [MM] CODEX 54MM HIGH X 114MM HIGH

CB Cable Basket Sleeve 50 108 180 AFCBS50CB Cable Basket Sleeve 75 133 180 AFCBS75CB Cable Basket Sleeve 100 170 180 AFCBS100CB Cable Basket Sleeve 150 220 180 AFCBS150CB Cable Basket Sleeve 200 272 180 AFCBS200CB Cable Basket Sleeve 250 324 180 AFCBS250CB Cable Basket Sleeve 300 424 180 AFCBS300CB Cable Basket Sleeve 400 478 180 AFCBS400CB Cable Basket Sleeve 450 528 180 AFCBS450CB Cable Basket Infill material Thickness 20mm : Width 180mm : Length 1000mm AFCBSIF

> Availability

ACOUSTICRATED

Page 46: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

46

FIRE RATED CLADDING SEALS> Trade Name ASTRO CLAD VENTILATED FIRE BARRIERS

> Product DescriptionMany rainscreen and cladding systems aredesigned with an open cavity to provideback ventilation. The cavity acts like anopen chimney to allow for moisturedissipation and to create a back pressureto repel rain ingress. However in a firesituation this chimney effect creates anopen path for the hidden spread of fireboth vertically and horizontally behindthe cladding system. The Astroflamerange of fire rated cladding seals willmaintain the ventilated cavity in normalconditions, leaving a continuous free airspace, but in the event of a fire, theintumescent ventilated fire barrier will

Creates a fire barrier within rainscreen claddingSuitable for ventilated cavities from 15mmTested to BS 476 Part 20 : BS EN 1363-1 to the principles of EOTA TR31Improves cladding performance30-120 minutes rating (depends onsubstrate)Horizontal or Vertical use

> Quick Overview

quickly expand to seal off the cavity toprevent the spread of fire.

Ventilated Fire Barriers for Cavities15mm - 50mm

Many timber framed structures require acontinuous ventilated to be maintainedto dissipate moisture and prevent dampproblems. The Astroflame ventilated firebarriers have been tested in combustibletimber constructions and can maintainthe minimum 30 minute rating whilstallowing continuous ventilation in normalconditions.

Ventilated Cavity

Breather Membrane

Cladding

Max25mm

35mm

4mm

Ventilated Cavity

Cladding

Max50mm

Breather Membrane

75mm

6mm

Astro Clad – AFFRCLAD35Astro Clad – AFFRCLAD35 was designed tomeet the NHBC requirements to maintain aminimum 15mm ventilation gap in timberframe constructions. The product has beensuccessfully fire tested in maximum sizecavities of 25mm fitted directly ontocombustible breather membrane and fixedinto the timber structure to provide at least30 minutes fire rating. It can additionallyachieve greater fire ratings in non-combustiblestructures

Size: 35mm x 4mm x1000mm encased in foilMaximum cavity size; 25mm. Maximum freearea; 83%. Fire ratings: Minimum 30 minutesin Timber Structures. 120 minutes in Non-Combustible Structures.

Astro Clad – AFFRCLAD75Astro Clad- AFFRCLAD75 was developedfollowing an increasing demand for a suitableproduct to close off larger cavities up to 50mmin timber frame constructions.

The product has been successfully fire testedin cavities up to a maximum of 50mm withinboth combustible timber structures and non-combustible structures to provide up to 120 minutes fire rating.

Size: 75mm x 6mm x1000mm encased in foilMaximum cavity size; 50mm. Maximum freearea; 87%. Fire ratings: Minimum 30 minutesin Timber Structures, 90 minutes on mineralwool over cement board 120 minutes in Non-Combustible Structures.

ASSESSED FIRE RATING CONSTRUCTION TYPE HORIZONTAL VERTICAL

TIMBER FRAME 30 60

ASSESSED FIRE RATING CONSTRUCTION TYPE HORIZONTAL VERTICAL

MASONRY / CONCRETE 120 120

ASSESSED FIRE RATING CONSTRUCTION TYPE HORIZONTAL VERTICAL

BRICK, BLOCK, MASONRY 120 120

AERATED CONCRETE BLOCK 120 120

ASSESSED FIRE RATING CONSTRUCTION TYPE HORIZONTAL VERTICAL

KINGSPAN K15 ON CONCRETE 120 120

KINGSPAN K15 ON TIMBER 30 60

ASSESSED FIRE RATING CONSTRUCTION TYPE HORIZONTAL VERTICAL

MIN. FIBRE ON CONCRETE 90 90

MIN. FIBRE ON TIMBER FRAME 30 60

ASSESSED FIRE RATING CONSTRUCTION TYPE HORIZONTAL VERTICAL

TIMBER FRAME 30 60

TO ORDER ASTRO CLAD SILVER35MM X 4MM X 1000MM AFFRCLAD35

TO ORDER ASTRO CLAD SILVER75MM X 6MM X 1000MM AFFRCLAD75

Page 47: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

47

Astro Clad – AFFRCLAD5050Astro Clad – AFFRCLAD5050 was designed to provide a large continuous open air spacefor cavities up to 125mm. The product hasbeen successfully fire tested to a maximumcavity size of 125mm fitted directly ontocombustible breather membrane and fixedinto the timber structure to provide at least30 minutes fire rating.

In addition the ventilated fire barrier can befitted in between phenolic insulation toprovide an effective fire barrier.

Size: 50mm x 50m x1000mm encapsulated inred polythene. Maximum cavity size: 125mmMaximum free area: 60%. Fire ratings: Minimum 30 minutes in Timber Structures Minimum 30 minutes fitted betweenPhenolic Insulation.

ASSESSED FIRE RATING CONSTRUCTION TYPE HORIZONTAL VERTICAL

TIMBER FRAME 30 30

ASSESSED FIRE RATING CONSTRUCTION TYPE HORIZONTAL VERTICAL

MASONRY / CONCRETE 30 30

TO ORDER ASTRO CLAD REDRED 50MM X 50MM X 1000MM AFFRCLAD5050

Ventilated Cavity

Breather Membrane

Cladding

Max125mm

50mm

50mm

Steel FixingSpike

Ventilated Cavity

Cladding

Max125mm

Steel FixingSpike

Breather Membrane

50mm

50mm

AFFR CLAD PLUS +

AFFR CLAD PLUS +

Astro Clad – AFFRCLADPLUS+Astro Clad-AFFRCLADPLUS+ offers aneffective fire barrier for cavities over 125mm.The product has been successfully fire testedfor up to 90 minutes fitted directly ontocement board. The product not only offers a superior fire rating but also allows acontinuous ventilation space of up to 44mm.This provides excellent ventilation behind thecladding whilst leaving enough free space forthe installer to easily install the claddingpanels after the ventilated fire barrier seal.

Finish: Encapsulated in red polytheneSize: Customer specifies the required depthbased on formula below

75mm x 1000mm x Total Cavity Width minus44mm (Custom Depth) Maximum Air Gap: 44mm. Fire ratings: 90 minutes fixed tocement board.

TO ORDER ASTRO CLAD RED75MM X 1000MM X YOUR CUSTOM DEPTH MMAFFRCLADPLUS+

ASSESSED FIRE RATING* CONSTRUCTION TYPE HORIZONTAL VERTICAL

BRICK, BLOCK, MASONRY 30.60.90 30.60.90

AERATED CONCRETE BLOCK 30.60.90 30.60.90

ASSESSED FIRE RATING* CONSTRUCTION TYPE HORIZONTAL VERTICAL

FITTED WITH KINGSPAN KITS 30.60.90.120 30.60.90.120

ASSESSED FIRE RATING* CONSTRUCTION TYPE HORIZONTAL VERTICAL

MIN. FIBRE ON CONCRETE 90 90

MIN. FIBRE ON TIMBER FRAME 30 60

ASSESSED FIRE RATING* CONSTRUCTION TYPE HORIZONTAL VERTICAL

TIMBER FRAME 30 30

* Fire rating will vary depending on cavity size.

> How to order this product

FOR EXAMPLE10/ASTRO CLAD/AFFRCLADPLUS+

PLEASE QUOTEQUANTITY/TRADE NAME/PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 48: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

48

CAVITY FIRE BARRIER ROLL> Trade Name ASTRO CAVITY FIRE BARRIER ROLL

> Product DescriptionCavities are created in many wallconstructions to aid thermal insulationperformance and to provide a moisturebarrier. Such constructions are common in residential, public and commercialbuildings. Completely closing the cavity,for example with solid cavity barriers, candetract from its performance and canresult in both thermal and moisturebridging and potential structural damage.

These wall cavities can form unrestrictedchimneys which, if left unprotected, canallow fire to spread both vertically and

Tested to BS 476 Part 2030 Minutes Fire RatingFor cavities up to a nominal 50mmSuitable for timber & masonry cavities and behind door and window jambsPrevents moisture damageReduces the need for unsightly ventilationand drainage aperturesLow Profile DesignPrevents pushing out of bricks or distortion of claddingCompact Roll

> Quick Overview

> How to order this product

FOR EXAMPLE5 / ASTRO CAVITY FIRE BARRIER / AFCFBR75

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

horizontally around a building. Cavities aresubject to Building Regulations and mostshould be fitted with fire barriers to preventthe spread of fire via the open cavity.To combat this Astroflame as part of itscontinuing development of passive fireprotection solutions has developed aCavity Fire Barrier On a Roll.

Note:Not suitable for use with rainscreencladding or timber cladding systems.

75mm wide x 4mm thick x 6.3 metreslong. Product Ref : AFCFBR75

VENTILATED FIRE BARRIER KIT> Trade Name ASTRO VFB KIT

> Product DescriptionThis kit enables on-site assembly of fullyfire tested and approved Ventilated FireBarriers to fit all common cavity sizeswith an air gap left for ventilation andmoisture dissipation. Air gaps of 25, 35and 46mm are supported.

A roll of fire barrier material and fixingsare supplied with the kit but some cavitiesmay require mineral fibre board to narrowthe cavity gap so that the activated fireseal fully closes the ventilation air gap.

This Ventilated Fire Barrier (VFB) kit fire protectsventilated cavities without compromising aircirculation.Suitable for air gaps of 25, 35 and 46mm,dependant on cavity sizeTested for use in Timber Frame, Masonry,Blockwork, Brickwork & Concrete constructions.Fire Integrity of 30/60mins: BS 476 Part 20: 1987.Permits cavity deviations of up to 10mm.One product reduces stock holding as customsizes can be made in minutes.Can be assembled on site.

> Quick Overview

> How to order this product

FOR EXAMPLE5 / ASTRO VFB KIT / AFCFBRKIT

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Mineral fibre board is sold separately.VFB Kit can be mounted directly onTimber Frame, Masonry, Kingspan* andMineral Fibre insulation. Fully tested withcavity deviations of up to 10mm to ensurea reliable fire barrier is maintained. Fullytested in most popular constructions togive 30/60 minute fire protection75mm wide x 4mm thick x 6.3 metres long.

* Limited applications, check withAstroflame for details.

NO INSULATION MINERAL WOOL K-1525-35mm Air Gap 60min 60min 60min46mm Air Gap 30min 30min 30min

> Fire Ratings

Page 49: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

49

INTUMESCENT EXPANSION JOINT SEALS

> Trade Name ASTRO EJ SEAL

> Product DescriptionAll expansion and movement joints in a fireseparating wall and floor must be fire stoppedwith a material that will accommodate therequire movement whilst providing thenecessary degree of fire integrity.

Astroflame Intumescent Expansion Joint Sealis an elastomeric foam laminated with a graphite-based, intumescent compound onboth sides. It is designed to perform as a 2 or4-hour barrier in construction movementjoints, when tested to EN 1366-4 and BS476.Designed for long linear joint installations inboth horizontal and vertical applications it is aflexible and water resistant seal that expandswhen exposed to heat.

Fire Rated Expansion Joint Seal / Linear Joint SealAvailable up to 150mm gap size.Joint movement capability of +/- 50%.Fire resistance testing to EN 1366-4 E 120, EI120and BS 476 240mins.IET (IEE) 17th Edition Fire Stop Compliant toRegulation 527.1-3 - Electrical Installations.BS 7671-2008 Chapter 42 & 52 - ElectricalInstallations Fire Resistance.Acoustic Isolation to EN 10140 to 22dB.Air Permeabiltiy testing to EN 1026 to 600Pa -100Pa 3.3/1.7 m3/h/m2 with FLEXI COAT.Highly flexible and water resistant.Maintenance free.Certifire 3rd Party Accreditation

> Quick Overview

The carbonaceous char formed by the graphiteprevents the spread of fire through the jointthus ensuring the integrity of the compartmentwall/floor is maintained.

Tested in block wall, concrete and masonry.Tested in concrete floors. Tested in linear jointsup to 150mm wide. Tested with cables, cablebunches, cable trays and cable trunking. Jointmovement capability of +/- 50%. Maintenancefree. Halogen free, resists fungi and vermin.

Sold individually in metre lengths.

> How to order this product

FOR EXAMPLE10 / ASTRO EJ SEAL / AFEJ20/120/ 20MM / 120 MINS

PLEASE QUOTEQUANTITY/TRADE NAME/PRODUCT REF/SIZE (WIDTH MM)/FIRE INTEGRITY RATING.

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

GAP SIZE DIMENSIONS INTEGRITY INSULATION PRODUCT CODEUp to 10mm 12 x 12mm 120 minutes 120 minute AFEJ10/12011 – 20mm 29 x 12mm 120 minutes 30 minutes AFEJ20/12021 – 25mm 32 x 20mm 120 minutes 30 minutes AFEJ25/12026 – 35mm 53 x 20mm 120 minutes 60 minutes AFEJ35/12036 – 50mm 61 x 35mm 120 minutes 60 minutes AFEJ50/12051 – 65mm 85 x 40mm 120 minutes 60 minutes AFEJ60/12066 – 75mm 90 x 50mm 120 minutes 120 minutes AFEJ75/12076 – 100mm 126 x 100mm 120 minutes 120 minutes AFEJ100/120101 – 120mm 147 x 125mm 120 minutes 120 minutes AFEJ120/120121 – 150mm 170 x 100mm 120 minutes 120 minutes AFEJ150/120

> Availability

GAP SIZE DIMENSIONS INTEGRITY INSULATION PRODUCT CODEUp to 10mm 12 x 25mm 240 minutes 120 minutes AFEJ10/24011 – 20mm 29 x 25mm 240 minutes 120 minutes AFEJ20/24021 - 25mm 32 x 30mm 240 minutes 60 minutes AFEJ25/24026 - 35mm 53 x 30mm 240 minutes 60 minutes AFEJ35/24036 – 50mm 61 x 50mm 240 minutes 120 minutes AFEJ50/24051 – 75mm 90 x 75mm 240 minutes 120 minutes AFEJ75/24076 – 100mm 126 x 125mm 240 minutes 240 minutes AFEJ100/240101 – 125mm 147 x 125mm 240 minutes 240 minutes AFEJ125/240126 – 150mm 170 x 125mm 240 minutes 240 minutes AFEJ150/240

120 Minute Fire Integrity

240 Minute Fire Integrity

Page 50: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

50

FIRE RESISTANT FLEXIBLE BOARD> Trade Name ASTRO FLEXI-BATT

> Product DescriptionAstro Flexi-Batt is designed to preventthe passage of fire and smoke aroundpenetrating services and is ideal for edgeof slab detail and linear joints that requirehigh movement. Flexi-Batt permits highlateral and longitudinal movement forpenetrating services, facade designs andhead of wall installations. Its integralstructural support system gives largeaperture designs the stability ofconventional built-in fire stopping methods.Astro Flexi-Batt has a low densityconstructed core coated with ASTROFLEXI COAT SEALANT on both faces.

Highly Flexible Fire Board / Batt designed toprevent the passage of fire around penetratingservices with high movement.Dynamic movement testing 500 cycles per 30 mins.Accommodates site tolerances due to unique Hi-flex design core construction.Fire resistance testing to EN 1366-3 EI 120, EN1366-4 EI 120.Fire Classification to EN 13501-2.60 mins fire and smoke barrier (1 x 50mm Flexi-Batt)120 mins fire and smoke barrier (2 x 50mm Flexi Batt).Acoustic Isolation to EN 10140 to 52dB.Air Permeability testing to EN 1026 to 600Pa.Water Permeability testing to EN 1027 to 450Pa.Can be spray, brush, pour or trowel applied.Tested with metallic pipes, cables, cable bunches,cable trays and cable ladders.Certifire 3rd Party Accreditation

> Quick Overview

> How to order this product

FOR EXAMPLE20/ ASTRO FLEXI-BATT / AFB1000DCFB / 1000X600X50

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / DESCRIPTION

This fire batt remains flexible, with amovement capability of +/- 50% from -10 °C to +95 °C, to permit thermal andmechanical movement of services.Causes no known effects to plastic pipes,plastic cables, sheathing or metalliccomponents. Ideal for slab edgeapplications, head of wall and movementinstallations. Unaffected by oil, fungus,moisture, vermin, weather and containsno halogens or asbestos.

ASTRO FLEXI- BATT : 600mm x 1000mmx 50mm: 80kgm³ density.

FIRE RESISTANT FLEXIBLE COATING> Trade Name ASTRO FLEXI-COAT SEAL

> Product DescriptionFlexi-Coat has been developed for use on astone wool or elastomeric base. Flexi-Coatremains highly flexible to permit thermal andmechanical movement of services and thebuildings structure. Once the Flexi-Coat isapplied it prevents the passage of fire, smokeand sound between fire rated compartmentsgiving a fire resistance tested to BSEN 1366-3120EI and BSEN 1366-4 120EI. Flexi-Coat hasalso achieved 600Pa air permeability resistancetesting to EN1026 and 450Pa waterpermeability resistance testing to EN 1027.Tested with metallic pipes, cables, cablebunches, Cable Trays and Cable Ladders andcauses no deleterious effects to plastic pipes,

plastic cables, sheathing or metallic components.Optimum solution for the sealing of the slabedge to the external cladding system - offeringhigh movement capabilities. Install on base of80kg/³ stone wool for flexible installations.Can be installed in to voids / cavities up to500mm wide. Flexi-Coat is a water basedelastomeric acrylic coating, having excellentfire, water, air permeability and elastomericproperties offering up to 50% movement.Ideal for spray, trowel, brush & pouringapplications. Halogen free. Unaffected by oil.Resists vermin and fungi. Contributes to GreenBuilding. Can be used in conjunction with ourFLEXI BOARD. ASTRO FLEXI COAT: 7.4 Litre Pail

Up to 2 hours fire resistance.Smoke, acoustic, air and water barrier.Offers 50% joint flexibility between -10 to +95 °C.Fire Resistance EN 1366-4 EI120, EN 1366-4 EI 120Fire Classification EN 13501-2Acoustic Isolation EN 10140 to 52dBAir Permeability EN 1026 to 600PaWater Permeability EN 1027 to 450PaSuitable for indoor use without additionalenvironmental protection.Withstands high pressure water and air.Dynamic movement testing 500 cycles per 30 mins.Can be spray, brush, pour or trowel applied.Ideal for slab edge applications, head of wall andmovement installations.Suitable for voids up to 500mm wide.Ideal for spray, trowel, brush & pourable application.Certifire 3rd Party Accreditation

> Quick Overview

> How to order this product

FOR EXAMPLE5 / ASTRO FLEXI COAT SEAL / AFBFLEXICOAT

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 51: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

51

FIRE RESISTANT MORTAR> Trade Name ASTRO FM COMPOUND

> Product DescriptionA one part synthetic mortar which whenmixed with water produces a trowelableor pourable compound suitable for thesealing of openings in walls and floors toprevent the passage of fire and smoke.The seal is strong, non combustible, canbe made load bearing. Mortar has fireresistance to EN 1366-3 and BS 476 part 4and 20. Up to 4 hours at 100mm thickness,2 hours at 75mm thickness and 1 hour at50mm thickness. Additional services canbe easily added through the mortar and

Suitable for fire protecting large openings in floorsand walls.Fire Resistance testing to EN 1366-3 EI 60, E 90,BS 476 - 300mins.Fire Classification EN 13501-2.Load bearing for 1.5kN, 2.5kN and 5kNUp to 4 hours fire resistance for floors & wallsAcoustic Isolation testing to EN 10140 to 44dB.Air Permeability testing to EN 1026 to 600PaNHBC Type ApprovalCertifire 3rd Party Accreditation

> Quick Overview

> How to order this product

FOR EXAMPLE20 / ASTRO FM COMPOUND / AFFC / 20KILO

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT CODE / WEIGHT

resealed with further mortar. Where plasticpipes pass through the mortar, AstroflamePipe Wraps should be used. Tested toBS476: Part 20 Astroflame Fire ResistantMortar can provide up to 6 hours fireresistance depending on depth/width.Load bearing up to 5kN and suitable up tospans of 4700mm. Life expectancy of over20 years. Minimum waste. Can bereactivated to extend the working time.Free of halogens, asbestos, fibres and silicaand is non toxic. Available in 20kg bags.

INTUMESCENT PUTTY> Trade Name ASTROPUTTY

> Product DescriptionAstroflame fire putty is a solvent free,easy to use, non-setting intumescentcompound, which is ideal for sealingaround pipes and cables in walls and floors.Tested to EN1366-3 on C1, C2 and D1 TypeCables, Cable Trays and Metallic Pipes.Causes no known detrimental effects toplastic pipes, plastic cables, sheathing ormetallic components. Can accommodatesubstantial movement of servicepenetrations and can be easily removedand re-used. The flexibility of the puttyenables complex and irregular shapes andopenings to be fire stopped. Offersexcellent hot and cold smoke sealingproperties and is not affected by fungal

Fire Putty with fire resistance testing to EN 1366-3EI 120, and BS 476 240mins.Fire Classification to EN 13501-2.Certifire 3rd Party AccreditationAcoustic Isolation to EN 10140 to 65dB.Tested with metallic pipes, cables, cable bunches,cable trays and cable ladders.Non-setting - easily removed and re-used.Fills irregular shapes.Highly flexible and water resistant.Halogen free, resists fungi and vermin.Shelf Life 60 months.

> Quick Overview

> How to order this product

FOR EXAMPLE12 / ASTROPUTTY / AFIP / 1KILO

PLEASE QUOTEQUANTITY /TRADE NAME /PRODUCT CODE/ WEIGHT

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

attack or moisture. Ideal for electrical,telecommunications and other suchindustries. Astroflame fire putty has beenindependently tested in accordance withBS476: Part 20: 1987 and EN1366-3 andcan provide up to 4 hours fire resistancedepending on depth and volume. Testedin block wall, concrete, masonry andplasterboard partition. Tested in concretefloors. Tested in large service openings up to 250 x 150mm.

If you are buying putty to make puttypads for electrical socket boxes check ourPUTTY PAD ALTERNATIVE INSERTS -quick, clean and full fire protection.

Page 52: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

52

FIRE RESISTANT BATT> Trade Name ASTRO BATT

> Product DescriptionSpecifically designed for sealing aroundservice penetrations in walls and floors, asingle Astroflame board (50mm or 60mmthick) can provide high levels of fireintegrity and insulation. Tested in BlockWall, Concrete, Masonry, PlasterboardPartition, Composite Panel and DurasteelWall. Tested in Concrete Floors. Offeringup to 4 hours fire resistance in accordancewith BS4746: Part 20: 1987. Up to Rw48dBsound reduction achieved by using twoboards. Astroflame Boards consist of astone fibre core coated on both sides with

Fire Resistant Board for sealing service penetrationsin walls or floors.50mm or 60mm thickness batt gives 4 hours fire andsmoke barrier and up to 2 hours insulation.Fire Resistant testing to EN 1366-3 EI 60 E 90, BS 476 - 240mins.Fire Classification to EN 13501-2.IET (IEE) 17th Edition Fire Stop Compliant toRegulation 527.1-3 - Electrical Installations.BS 7671-2008 Chapter 42 & 52 - ElectricalInstallations Fire Resistance.Air Permeability testing to EN 1026 to 600Pa.Acoustic Isolation testing to EN 10140 to 61dB.Life expectancy of over 25 years.Suitable for indoor use without additionalenvironmental protection.Remains flexible between -5°c to +70°c.Certifire 3rd Party Accreditation.

> Quick Overview

> How to order this product

FOR EXAMPLE20/ ASTROBATT / AFB1200DC50 / 1200X600X50

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / DESCRIPTION TYPICAL WORDING

Astro Coat which transforms during a fireto prevent the passage of fire and smoke and the transfer of heat.Unaffected by oil, fungus, moisture,vermin, weather and contains nohalogens or asbestos. ASTRO BATT cutedges or joints should be coated withASTRO COAT. If your installation is subjectto regular structural movements we stocka flexible fire rated batt and a flexiblesealant coating designed to accommodatecompression and elongation forces.

ITEM CODE DENSITYFirebatt (60mm) AFB1200DC60 160KGM3

Firebatt (50mm) AFB1200DC50 140KGM3

> Availability

FIRE RESISTANT SEALANT COAT> Trade Name ASTRO COAT & ASTRO PS COATING

> Product DescriptionAstro Coat is a water-based, acrylic, ablativecoating with excellent fire, water, airpermeability and elastomeric properties.It prevents the passage of fire, smoke, airand sound between fire rated compartmentsand has been tested in block wall, concrete,masonry, plasterboard partition, compositepanel, durasteel wall and concrete floors.Fire protects service penetration openingscontaining metallic pipes, cables, cable trays,heating & ventilation ducts and trunking.Can be used to coat service insulation as

Versions for use on fire batt or mineral wool.Easy to use fibre free coating.Fire Resistant testingEN 1366-3 EI 60 E 90, E 120, BS 476 - 240mins.Fire Classification to EN 13501-2.IET (IEE) 17th Edition Fire Stop Compliant toRegulation 527.1-3 - Electrical Installations.BS 7671-2008 Chapter 42 & 52 - ElectricalInstallations Fire Resistance.Air Permeability testing to EN 1026 to 600Pa.Acoustic Isolation testing to EN 10140 to 63dB.Remains flexible between -5°c to +70°c.Life expectancy of over 25 years.Suitable for large openings in walls and floors with additional supports.Flexible and water resistant.Certifire 3rd Party Accreditation

> Quick Overview

> How to order this product

FOR EXAMPLE5 / ASTRO COAT / AFBCOAT

PLEASE QUOTEQUANTITY /TRADE NAME/PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

part of the sealing system. Astro Coat is athinner formulation for use with Astro BATT,to seal the edges around the services andbetween the substrate and the batt beforeinstallation. Suitable for large openings inwalls and floors with additional supports.Fire Resistant testing to EN 1366-3 EI 60 E90, E 120, BS 476 - 240mins. Astro PSCoating (Astro Penetration Seal Coating) is athicker formulation, for brush application, tocoat plain stone wool as it is being installedby the user: it can also be applied toinsulation already in place on the services.Fire resistance has been tested to EN1366-4:2009 EI 120 or BS 476 240 mins when appliedto pre-fitted stone fibre of 140 - 180kg/m3density and 40 to 150mm thickness.Contact us for classification details.

Page 53: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

53

FIRE RATED LOFT CONE> Trade Name ASTRO LC LOFT CONE

> Product DescriptionRecessed downlights are a common feature inmany homes, however they also represent apotential fire hazard, especially if buried in loftinsulation. Numerous house fires have beencaused by the ignition of combustibles inceiling spaces caused by hot downlights beingcovered with insulation. In addition, the thermalperformance of a ceiling is typically reduced by50% when penetrated by multiple downlightsdue to heat loss through the gaps made in theinsulation. Using an Astro Loft Cone restoresthe air tightness of the ceiling and ensurescontinuity of insulation so that the overallperformance is similar to that of a ceilingwithout downlights. The Astro Loft Cone meetsthe latest needs of BS EN 60598 and otherinternational standards for a lighting product

F-Capped Flanged Fire Hood 30 minute firerated.Tested for 50 Watt lamps.Thermal test BS EN 60598 Section 12.4 and BS 476 Part 20.IP6X dust tightEasily fitted - simply drop over light fittingand seal with mastic to form vapour seal.Save energy by limiting heat loss into loft space.Allows continuous insulation over lights.Fully tested to prevent overheating.Reduces fire risk by keeping combustiblesaway from hot downlight.Rigid and capable of supporting loftinsulation away from light fitting.Greendeal Compliant. PAS 2030 CompliantEEPN Compliant

> Quick Overview

> How to order this product

FOR EXAMPLE12NO / ASTRO LC LOFT CONE / AFLFTCON

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

when covered with insulation (sometimesreferred to as a 'capped-F' type). It adheres tothe maximum external temperatures requestedby the IEC even when cool beam lamps areused. Suitable for aluminium and dichroicreflector lamps up to a max. 50W with cut-outdimensions of 50-100mm. Designed to meetboth the new NHBC requirement for a vapourseal and the requirement for continuous loftinsulation documented in Approved DocumentL, whilst still maintaining an air space betweenthe light fitting and the insulation - as stipulatedby many light fitting manufacturers. UseAstroflame Intumescent Mastic to completevapour sealing. Dimensions: External 240mm x180mm high. Internal 200mm x 150mm high.

ITEM SIZE PRODUCT CODELoft Cone 240mm x 180mm AFLOFTCON

> Availability

LUMINAIRE COVER> Trade Name ASTRO LUMI COVER

BS 476 Part 23:1987 - 60 minute fire ratingRestores and maintains the fire protectionperformance of the ceilingMaintains integrity - prevents fire frompenetrating the ceiling voidSimple to fix above or below ceiling - in minimal timeNo clips, screws, drilling or additional supportrequired.Sizes to fit a wide range of modular 600 x600mm and 1200 x 600mm fittings.Lightweight: 1.5 - 2.5 kg. Cost effective.

> Quick Overview

> How to order this product

FOR EXAMPLE10/ ASTRO LUMICOVER / AFLUMICOVS

PLEASE QUOTEQUANTITY / TRADE NAME/ PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

The Luminaire cover has been developed toprovide maximum protection for ceilings wherefire resistant tiles have been replaced by lightfittings. The cover has been designed to allowfor ease of fitting. It is self locating andcannot be fitted incorrectly. The cover alsogives additional insulation protection to theceiling void reducing the chance of ignition ofaccumulated dust and insulation. The cover isunaffected by moisture and is non toxic. With the cover in place, the modular lightfitting can be installed as normal.

TYPE SIZES CODESquare 600 x 600 mm AFLUMICOVSRectangular 1200 x 600 mm AFLUMICOVL

> Availability

> Product DescriptionRecessed luminaires or modular light fittingsare widely used in commercial buildings. Eachceiling is subject to fire regulations and whereapplicable the ceiling construction needs to befire rated. When a ceiling tile is replaced by arecessed luminaire, the integrity of the ceiling’sconstruction and its ability to perform in a fireare reduced significantly. To combat thisAstroflame, as part of its continuingdevelopment of passive fire protection solutions,has developed a Recessed Luminaire Cover foruse in 30 and 60 minute fire rated ceilings.

Page 54: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

54

INTUMESCENT ACOUSTIC RATED DOWNLIGHTER COVER

> Trade Name ASTRO DL COVER

> Product DescriptionDownlighters in ceilings are widely used incommercial buildings. Each ceiling is subjectto fire regulations and where applicable theceiling construction needs to be fire rated.However, once a hole has been made in theceiling for a downlighter, the integrity of theconstruction and it's ability to perform in afire can be reduced significantly. To combatthis the Astro Downlighter Cover has beendeveloped to cover maximum protection for

Downlight Fire Hoods fire rated to BS EN1365-2:2000 / BS476 Part 23:198730 or 60 minute fire ratingCovers a wide range of mains & low voltagedownlightersProvides a highly insulating stable char whenexposed to firePrevents fire from penetrating the ceiling voidand retains ceiling's fire protection integrityAcoustic Rated BS EN 1SO 140 : BS EN ISO 717Ventilated to reduce heat build upInstalled in seconds. No screws, drilling oradditional supported requiredCan be used in suspended, plasterboard orconcrete ceilingsLightweight & flexible cover can be fittedfrom below or above the ceiling

> Quick Overview

> How to order this product

FOR EXAMPLE10/ASTRO DL COVERS/AFDLCOVS/ SMALL

PLEASE QUOTEQUANTITY / TRADE NAME/ PRODUCT REF / SIZE

holes created by he introduction of adownlighter and to allow for maximum easeof fitting. In a fire situation the cover expandsinternally to fill all the available space with ahighly insulating fire resistant char. Thus, thefire is unable to penetrate the hole and thecover is able to give additional insulationprotection to the ceiling void to reduce thechance of heat build up and ignition offlammable materials such as accumulateddust and insulation.

CODE SIZE MAX FITTING SIZE CUTOUT DIAM. MMAFDLCOVS Small 150 x 150 50 - 75AFDLCOVM Medium 200 x 200 75 - 100AFDLCOVL Large 250 x 250 100 - 140AFDLCOVXL X-Large 300 x 170 145 - 270AFDLCOVXXL XX-Large 350 x 230 145 - 270

> Availability

FIRE RATED LUMINAIRE CANOPY> Trade Name ASTRO LUMI CANOPY

> Product DescriptionAstroflame Luminaire Canopies stop thepassage of fire and smoke, for up to 60 mins,through luminaire light fittings in a fire ratedceiling. Without the fire rated canopy in place,fire and smoke will penetrate the recessed lightfitting in seconds and spread into the void orroom above endangering lives and property.The Astro Lumi Canopy provides 60 minutesfire protection (in a plasterboard ceiling) by

Fire Rated Luminaire Canopy (Fire Hood) suitablefor use with suspended and modular ceilings.Tested to BS 476 Part 23: 1987, Clause 5, 60 mins.Complies with BS 476 Class "0" Building Regs.Complies with BS 476 Part 6 - Fire Propagationand BS 476 Part 7 - Surface Spread of Flame.Lightweight and simple to install.Can be fitted from above or below the ceiling.Self supporting, resistant to tear and abrasion.Certifire 3rd Party Accreditation

> Quick Overview

> How to order this product

FOR EXAMPLE10 / ASTRO LUMICANOPY / AFLUMICANL /LARGE

PLEASE QUOTEQTY / TRADENAME / PRODUCT REF /SIZE

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

completely containing the fire and smokewithin the cover. In normal (non-fire) conditionsthe heat from the light fitting can dissipatethrough the canopy fabric. The fire canopiesare easy to fit from either side of the ceilingand need no additional supports. They can alsone easily removed and replaced for lightingmaintenance. Fully tested to BS Standard 476part 20 & 23 clause 5. Astro Lumi Canopy alsomeets the requirements of class 0 materials.

DIMENSIONS WEIGHT SIZE CODE300mm x 300mm x 150mm 0.7 kg Small AFLUMICANS600mm x 300mm x 150mm 0.9 kg Medium AFLUMICANM600mm x 600mm x 150mm 1.0 kg Large AFLUMICANL1200mm x 300mm x 150mm 1.0 kg X Large AFLUMICANXL1200mm x 600mm x 150mm 1.8 kg XX Large AFLUMICANXXL

> Availability

ACOUSTICRATED

Page 55: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

55

INTUMESCENT ACOUSTIC MASTIC> Trade Name ASTRO INTU MASTIC

> Product DescriptionA one part intumescent acrylic masticfor sealing gaps around fire doors,window frames and for sealing joints,voids and irregular holes in fire ratedstructures. The sealant forms a char,preventing the passage of fire andsmoke, when exposed to the heat of afire. Maintains fire integrity whensealing around pipes and cables thatpenetrate walls. Tested in Block Wall,Concrete, Masonry and PlasterboardPartition. Tested in Concrete Floors.Tested in Linear Joints up to 50mmwide. Tested in large service openingsup to 490 x 150mm. Tested for sealingof linear joints in concrete floors,masonry walls and plasterboardincluding head of wall details. Testedaround metallic pipes, cable trays, cablebunches, small, medium and large

Intumescent Mastic with Acoustic Rating.For interior or exterior use.Advanced intumescent formulation.Fire resistance: EN 1366-3 EI 120, EN 1366-4 EI 240 and BS 476 300 mins.Fire Classification to EN 13501-2.Acoustic Isolation to EN 10140 to 48dB.Air Permeability testing to EN 1026 to600Pa - 100Pa 0.0/0.0 m3/h/m2.Mechanical Adhesion and Tensile testingto EN ISO 8039 & EN ISO 9046.Tested with Metallic Pipes, Cables, CableBunches, Cable Trays and Cable Ladders.Causes no known adverse effects toplastic pipes, plastic cables, sheathing or metallic components.Joint movement capability of +/- 20%.Highly flexible and water resistant.Halogen free, resists fungi and vermin.Certifire 3rd Party Accreditation

> Quick Overviewcables. Sealant remains highly flexibleafter installation In normal use themastic will maintain the sound reductionindex of a structure.The mastic has beenindependently tested in accordance withBS476 and EN requirements. It canprovide up to 300 mins of fire resistancedepending on depth/width and volumetricarea - please refer to the PerformanceTable below. It has good unprimedadhesion to a wide variety of commonbuilding substrates. although we dorecommend that a small area is testedon unusual substrates. Available in 310mlcartridges or 600ml foil packs, in white,brown or grey colours.

For additional information aboutclassification on different gap widths and depths using various substratesplease contact us or view our website.

PRODUCT CODE COLOUR SIZEAFIMW White 310mlAFIMB Brown 310mlAFIMG Grey 310ml

> Availability

ACOUSTICRATED

> How to order this product

FOR EXAMPLE100 / ASTRO INTU MASTIC / AFIMB / 310ML

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT CODE /SIZE

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

PRODUCT CODE COLOUR SIZEAFIMWFOIL White 600ml FoilAFIMBFOIL Brown 600ml FoilAFIMGFOIL Grey 600ml Foil

Page 56: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

56

HIGH PRESSURE EXPANSION SEALANT> Trade Name ASTRO HPE SEALANT

> Product DescriptionAstro HPE Sealant is a high pressure exerting,graphite based, intumescent sealant thatexpands when exposed to fire to protectpenetrations, including pipes and cables. Italso maintains the integrity and insulationperformance of the seal. The sealant is smoke,gas and air tight. Under fire conditions theproduct swells and exerts pressure to thesurrounding substrates leading to closure ofthe penetration. The integrity and insulation isthen maintained by the stability of theremaining product char. The sealant isintended for use in all types of servicepenetration through walls and floors wherefire integrity and insulation needs to be

For sealing combustible and non combustiblepenetrationsSealing combustible pipes PVC, HDPE and ABS up to 125mm. (2hrs)Sealing of cables & Telecommunication bunchesFire Resistance EN1366-3 El120, EN1366-4-EI120 Fire Classification to EN13501-2 Air Permeability to EN1026 - 600Pa ISO 11600.Smoke, gas, water tight and air tight.Can be used in openings up to 300mm x 100mm.High Expansion Ratio - up to 20:1Certifire 3rd Party Accreditation

> Quick Overviewpreserved. It has excellent non slumpproperties coupled with ease of applicationdue to its water based nature. Suitable forsealing Armaflex insulation. Suitable for use in irregular applications. Tested in LightweightPartitions (plasterboard). Insulation properties.Easy clean up with water and is odourless.Long life and can be over-painted. Causes noknown deleterious effects to plastic pipes,plastic cables, sheathing or metalliccomponents. Resists fungi and vermin.

For additional information aboutclassification on different gap widths and depths using various substratesplease contact us or view our website.

ACOUSTICRATED

NAME DIMENSIONS COLOUR CODEAstro HPE Sealant 310ml cartridge Grey only AFHPESG

> How to order this product

FOR EXAMPLE10 / ASTRO HPE SEALANT / AFHPESG

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

LOW SMOKE & TOXICITY INTUMESCENT MASTIC SEALANT

> Trade Name ASTRO LST MASTIC

> Product DescriptionA one part intumescent acrylic sealant designedto resist the passage of fire, by forming a charthat prevents the passage of fire and smoke, whilemaintaining excellent low smoke and toxicitylevels. Astro LST Mastic is halogen free and doesnot emit halogenated by-products under fireconditions. High performance 5 hour fire rating.Joint movement capability of +/- 12%. Highlyflexible and water resistant it has good unprimedadhesion to a wide variety of common buildingsubstrates. Tested in Block Wall, Concrete,Masonry and Plasterboard Partition. Tested inConcrete Floors. Tested in Linear Joints up to

Designed for use within enclosed areas such astunnels and London Underground stations.Tested for passenger carrying train systems toBS6853:1999 * and LUL approvedLow smoke and toxicity levels.Fire resistance testing to EN 1366-3 EI 120, EN1366-4 EI 240 and BS 476 300mins.Tested BS 6853:1999 D8.3: Smoke Ao (max)Fire Classification to EN 13501-2.Acoustic Isolation to EN 10140 to 48dB.Tested BS 6853:1999 B.1: Toxicity R valueAir Permeability testing to EN 1026 to 600Pa.Mechanical Adhesion and Tensile testing to ENISO 8039 & EN ISO 9046.Certifire 3rd Party Accreditation

> Quick Overview

50mm wide. Tested in large service openings up to 490 x 150mm. Tested with Metallic Pipes,Cables, Cable Bunches, Cable Trays and CableLadders. Causes no known effects to plastic pipes,plastic cables, sheathing or metallic components.In normal use it maintains the sound reductionindex of a structure. Resists fungi and vermin.This sealant contains no raw materials known to have an estrogenic effect in the environment.

For additional information aboutclassification on different gap widths and depths using various substratesplease contact us or view our website.

NAME DIMENSIONS PACK SIZE COLOUR CODEAstro LST Mastic 310ml cartridge 25 per pack White Only AFIMLST

> How to order this product

FOR EXAMPLE2 PACKS / ASTRO / AFIMLST

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

ACOUSTICRATED

Page 57: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

57

FIRE RATED SILICONE SEALANT> Trade Name ASTRO FR SILICONE

> Product DescriptionAstro Fire Rated Silicone is a highperformance sealant for use in firesealing joints and gaps up to 50mmwide. A neutral curing, odourless firerated silicone sealant with excellentweatherability and flexibility. Thesealant is primerless and offers a 4-hour fire rating to EN1366-4 and BS476part 20 & 22 and up to 4 hours integritywith a life expectancy of over 30 years.Other features include Low Smoke and

Fire resistance testing to EN 1366-4 EI 300and BS 476 240mins.Fire Classification to EN 13501-2. Acoustic Isolation to EN 10140 to 38dB.Air Permeability testing to EN 1026 to 600Pa.Weathering testing to ISO 11431.Fire rated up to 4 hours in both horizontaland vertical joints.Can be used in joints up to 50mm wide.Causes no known deleterious effects toplastic pipes, plastic cables, sheathing ormetallic components.Certifire 3rd Party Accreditation

> Quick Overview

Toxicity. Halogen free, ozone andradiation resistant. Non-slump, easy toapply and tool off. Contributes to GreenBuilding. Joint movement capability of+/- 25%. Highly flexible and waterproof.Resists fungi and vermin.

For additional information aboutclassification on different gap widths and depths using various substratesplease contact us or view our website.

NAME DIMENSIONS COLOUR CODEAstro FR Silicone 310ml cartridge White AFFRSW

> How to order this product

FOR EXAMPLE10 / ASTRO FR SEALANT / AFFRSW

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

FIRE RATED ACOUSTIC FOAM> Trade Name ASTRO FR-EC ACOUSTIC FOAM

> Product DescriptionA one component foam which expands to filland seal gaps. Note: This product is fire ratedbut is not intumescent. Fire & Acoustic RatedEconomy Foam has been tested to BS476 Part20, Class B1 Din 4102 and EN1366-4. Main UsesFor Joints/gaps in compartment walls and floors,fire & acoustic sealing around lightweightpartitioning, fire rated doors and servicepenetrations where the integrity andinsulation of firewall needs to be maintained.

Seals irregular gaps and expands to over40 times the can's volumeUp to 4 Hour Fire Rating with integrity &insulation.BS 476 PART 20EN1366-4Self curing. Forms a semi-rigid sealNHBC Type Approval

> Quick OverviewPrevents the transmission of smoke, sealsground pipework, insulates against noise andexcess temperatures, paintable. Tested toBS476 Part 20 specified openings for up to 4 hours, dependent on gap size. NHBC TypeApproval. 750ml canisters.

For additional information aboutclassification on different gap widths and depths using various substratesplease contact us or view our website.

> How to order this product

FOR EXAMPLE20 / ASTRO FR-EC ACOUSTIC FOAM / AFFRECFOAM / 750ML

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / PRODUCT CODE

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

ACOUSTICRATED

ACOUSTICRATED

Page 58: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

58

INTUMESCENT PAINT FOR TIMBER> Trade Name ASTRO ITC PAINT

> Product DescriptionIntumescent paint for bare or previouslypainted timber and timber derivative surfaceswhere surface spread of flame or firepropagation need to be controlled. The paintcontains intumescent compounds,

Class 1 & Class 0 Intumescent Paint for TimberBS476 Part 7: Class 1 surface spread of flame.BS476 Part 6: Fire propagation Class 0Available in a wide range of finishes.Brush, roller or spray application.

> Quick Overview

intumescent paint resin binders and highopacity pigments. When exposed to fire thepaint expands to create a fire protectivebarrier, insulating the timber surfaces fromheat and oxygen.

INTUMESCENT PAINT FOR WALLS & CEILINGS

> Trade Name ASTRO IWC PAINT

> Product DescriptionAstroflame IWC is an intumescent undercoatfor application to previously painted plaster,Artex, board, brick and concrete walls andceilings. It is used to upgrade walls andceilings coated with multi-layered paint filmsto Class 0. Overcoating with Astroflame FRflame retardant paint insulates old paintfilms from fire, controlling the spread offlames along walls and ceilings. Inherentlynon-combustible surfaces such as plaster-board and brick can become a potential firehazard due to repeated redecoration withconventional paints. In a fire thick layers ofold paint tend to delaminate rapidly catching

Intumescent coating for previously paintedplaster, concrete, Artex etc.BS476 Part 7: Class 1 surface spread of flame.BS476 Part 6: Fire propagation.Designated Class 0 in accordance with U.K.Building Regulations.

> Quick Overview

and spreading fire around a building. Inextreme cases a lethal "flash- over" fireballeffect is created. The resultant risk to life andproperty can be greatly reduced at minimumcost using a combination of Astroflame IWCpaint, an insulating "intumescent" barriercoating, and Astroflame FR flame retardantpaint. When exposed to a fire Astroflameflame retardant paint releases a flameextinguishing gas which instantly protectsthe surface. Simultaneously heat activatesAstroflame IWC intumescent coatingunderneath causing it to expand and create a fire protective barrier, insulating old paintfilms from heat and oxygen.

> AvailabilityASTRO ITC Paint is available in 5 kilo and 20 kilo containers. It can be overcoated with ourflame retardant paint - available in BS4800, RAL and metallic colours and a range of finishes.Please contact our Technical Team for further advice.

> AvailabilityAstroflame IWC Paint is available in 5 kilo and 20 kilo containers. Please contact our Technical Team for further advice.

FLAME RETARDANT PAINT> Trade Name ASTRO FR PAINT

> Product DescriptionThis paint is for use as either a decorativefinish over our intumescent coatings orcan be used alone as a decorative topcoatwhere that is deemed to provide adequatefire protection or on surfaces with a non-combustible performance currentlymaintained with flame retardant paints.Suitable for use direct to bare or sound

previously painted non-combustible wallsand ceilings. Fire Proof Paints, also knownas flame retardant paints, assist in thecontrol of fire hazards caused by combustiblematerials, such as wood and existingflammable paint finishes, by releasing aflame extinguishing gas upon contactwith a fire.

Flame Retardant Paint - BS476 rated.BS476 Part 7: Class 1 surface spread of flame.BS476 Part 6: Fire propagation.Designated Class 0 in accordance with U.K.Building Regulations.Gloss, Eggshell, Matt & Silk finishes.Brush, roller or spray application.In BS 4800, BS 381C and RAL colour ranges.

> Quick Overview

> AvailabilityAstroflame FR Paint is available in 2.5 litre and 5 litre containers. Please contact our Technical Team for further advice.

Page 59: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

59

INTUMESCENT FIRE VARNISH> Trade Name ASTRO IF VARNISH

> Product DescriptionWhen exposed to a fire AstroflameIntumescent Fire Varnish expands to create a fire protective barrier, insulating the timbersurfaces from heat and oxygen. AstroflameIntumescent Fire Varnish is an exceptionallyclear lacquer for decorative fire protection ofprepared timber and timber derivativesurfaces. Overcoated with ASTRO FVO, itsspecial formula provides a hard, durable finishsuitable for panelling, boarding, furniture etc.For internal and external use on bare orpreviously varnished surfaces. Its clear finishenhances the natural beauty and fire protectsnew and previously varnished internal timber

Clear Intumescent Varnish BS476 Part 7: Class 1 surface spread of flame.BS476 Part 6: Fire propagation.Designated Class 0 in accordance with U.K.Building Regulations.Internal or External Use. Water basedBrush, roller or spray application.Sealer coat available in Gloss, Satin and Mattfinishes

> Quick Overview

surfaces. Astroflame Intumescent Fire Varnishhas good adhesion and can be applied overexisting varnished surfaces. Preparationrequires through abrading with wet or dryabrasive paper to provide a key. Wash downwith warm detergent solution and rinse withclean warm water. Allow to dry. A sealercoat/overcoat is also available in Gloss, Satinor Matt finishes. For humid areas applyAstroflame Fire Varnish Gloss Overcoat(ASTRO FVO) over the Astroflame Fire Varnish(ASTRO IFV). Please contact our TechnicalTeam for further advice.

> AvailabilityAstroflame Fire Varnish ASTRO IFV base coat is available in 20 meter square packs. The sealer coat ASTRO FVO sealer coat is available in gloss, satin and matt in 20 and 40 meter square packs.

INTUMESCENT PAINT FOR STEEL & CAST IRON

> Trade Name ASTRO ISS PAINT

> Product DescriptionASTRO ISS Paint is an intumescent coating forsteel, a thin decorative fireproof paint systemproviding fire resistance to structural steel andcast iron. Heat from a fire triggers a catalyticreaction causing intumescence (expansion) of

Intumescent Paint for structural steel andcast ironConforms to BS476 Part 21: - Fire resistancefor load bearing elements of structural steelRated for 30 or 60 minutes.Available in wide range of finishes.Brush, roller or airless spray application

> Quick Overview

an insulating char layer up to 50 times thepaint film thickness. This char keeps the steelbelow critical temperature to maintain thestructural stability of the building. Fireresistance of ½ hour and 1hour can be achievedwith a single application of ASTRO ISS Paint.

> AvailabilityA range of hard, high quality, weather resistant decorative finishes matches the decor,architectural or historic features of a building while helping to make it a safer structure.Available in BS4800, RAL and metallic colours and a non decorative finish for unexposed areas.Eggshell - BS4800 + RAL. One-coat gloss - BS4800 + RAL. Metallic - Steel, gunmetal, rust,silver, gold. Non decorative - N/A - For dry, hidden areas only. ASTRO ISS Paint is available in 5kilo and 20 kilo containers ASTRO FR PAINT (flame retardant topcoat finish) is available in 2.5and 5 Litre containers. Please contact our Technical Team for further advice.

HIGH BUILD PRIMER> Trade Name ASTRO HBP PRIMER

> Product DescriptionA High Build Quick Drying corrosion resistantmetal primer for structural steel and castiron. Contains high durability resin binders,light fast pigments and a high concentrationof zinc phosphate. Compatible with ASTROISS Paint and most other intumescent paintsystems, epoxy and conventional paints.

Suitable for application in Steel Fabricator'sshops or on site. Will protect exposedstructural steel during construction as wellas protecting internal steelwork thereafter.May be overcoated with our intumescentpaint systems as well as epoxy, conventionalgloss, eggshell, acrylic and vinyl paint finishes.

Compatible with our intumescent paintHigh Build & Quick DryingRed, White or GreySolvent or water based optionsBrush, Roller or SpraySuitable as a general use metal primer

> Quick Overview

> AvailabilityASTRO HBP Primer is available in 2.5 litre and 5 litre containers. Please contact our Technical Team for further advice.

For the enquiry forms for these products please scan the QRcodes on p 61

Page 60: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

60

ANTI-GRAFFITI PAINT> Trade Name ASTRO ANTI-GRAFFITI PAINT

> Product DescriptionA one-pack external coating designed togive effective protection against bothgraffiti and fly-poster attack. Astro AntiGraffiti Paint is permanent, not sacrificialsystem, allowing for repeated easy removalof any graffiti. Suitable for many surfaces,gives same day protection, repeat graffitiwashes off with water. Available in matt orgloss finish and has been specificallydesigned to minimise any alteration to theappearance of the protected surface. Wesupply a Non-Darkening Sealer for usewhere avoiding a surface colour change is

Non-sacrificial coating allows repeated easyremoval of graffiti.Wash off graffiti using warm water and milddetergentsAnti Graffiti Paint is designed to minimise anyalteration to the appearance of the protectedsurface.One-pack coating protects against fly-postersand marker pen 'tagging'.Can be used on most rough or smoothmasonry surfaces.Short drying and re-coating times.

> Quick Overview

essential. This anti graffiti coating issuitable for a wide variety of surfaces. Thematt version is particularly effective on thenormally difficult to protect substrates suchas rough brick or textured finishes. Thesystem can be used on concrete, render,masonry, porous stone, timber andpreviously painted surfaces, it should nothowever be used over Pliolite based products.If in doubt about the suitability of AstroAnti Graffiti Paint on a particular surface werecommend a small trial application be carriedout - contact Astroflame for advice.

> AvailabilityPacking : Single tins of 5 or 20 litre

> How to order this product

FOR EXAMPLE3 NO / ASTRO ANTI GRAFFITI PAINT / AAGPM5 / MATT / 5 LITRE

PLEASE QUOTEQUANTITY/DESCRIPTION / PRODUCT CODE / FINISH / SIZE

PRODUCT REF TYPE SIZEAAGPM5 MATT 5 LITREAAGPM20 MATT 20 LITREAAGPG5 GLOSS 5 LITREAAGPG20 GLOSS 20 LITRE

NON DARKENING SEALER COAT> Trade Name ASTRO NON DARK SEALER

> Product DescriptionNon Darkening Sealer is a clear 100% acrylicsealer dispersed in water making it lowodour, non-flammable and low toxicity.Used as a transparent sealer for poroussurfaces, such as, brick, mortar, concrete,render, porous stone and bare timber priorto application of Anti-Graffiti Paint. It isused to avoid darkening the original surface- for example bricks may not show anydarkening when an anti-graffiti coating isapplied but the mortar may do. To test theeffectiveness of Non Darkening Sealer we

Non Darkening Sealer Coat minimizes the riskof darkening the original surface where a clearanti graffiti coating is to be applied.A general non darkening sealer for concreteand concrete products such as cement render,mortars and grouts, fibro cement, etc.Seals natural stone against water penetration -reducing mould and mildew discolourationImproves spread rate of anti graffiti paint / coat.

> Quick Overview

strongly recommend a small discrete trialapplication be carried out. It is not requiredover sealed or previously painted surfaces.Can also used, on its own, as a general nondarkening sealer for concrete and concreteproducts such as cement render, mortarsand grouts, fibro cement, etc. It is alsosuitable for sealing sandstone and othernatural stone products against the ingressof water reducing mould and mildewdiscolouration. Excellent adhesion to concreteand most common building surfaces.Available in 5 litre containers.

> How to order this product

FOR EXAMPLE3 / ASTRO NON DARK SEALER / ANDS5

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 61: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

61

ANTI FLY POSTER PAINT> Trade Name ASTRO POSTER MAGIC

> Product DescriptionAnti Fly Poster Paint is a speciallyformulated version of Anti Graffiti Paint fortraffic light control boxes, telephone, cableand electricity junction boxes, CCTVenclosures, street lighting columns and

Posters do not adhere to surfaces coatedwith Poster Magic.Special formulation for street furniture.One-pack coating gives effective protectionagainst both fly-posting and graffiti.Allows for repeated easy removal of posters or graffiti without recoating.Clear finish in Matt or Gloss.

> Quick Overview

similar items of street furniture. Posters will not adhere to surfaces coated with AntiFly Poster Paint, once dry they will fall off or can easily be peeled off by hand. Noscrapers, solvents or water is required.

> AvailabilitySingle tins of 5 litre

> How to order this product

FOR EXAMPLE3 / ASTRO POSTER MAGIC / APM5

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

Scan the QR code with your phone ortablet to link directly.

TIMBER & WALLENQUIRY FORM

Scan the QR code with your phone ortablet to link directly.

STEEL PAINT ENQUIRY FORM

TURN TO PAGE 58 FOR OUR RANGE OF FIRE PROOF PAINTS OR VIEWWWW.ASTROFLAME.COM AND CLICK FIRE PROOF PAINTS.

FOR FIRE PROOFPAINTS THINK...

ASTROFLAMEM A N U F A C T U R E R S O F PA S S I V E F I R E S T O P P R O D U C T S

Page 62: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

62

MASTERSOLVE GREASE REMOVER> Trade Name ASTRO MASTERSOLVE

> Product DescriptionMastersolve is used to prepare surfaces forpainting and is a highly concentrated multi-purpose cleaning product with many otheruses. It dissolves: Grease : Fats : Nicotine :Inks : Dyes : Waxes : Carbons. Ideal for useon Floors : Walls : Concrete : Tiles : Alto

General Degreaser, Non ToxicBio Degradeable, Non CausticWater Soluble, Non CorrosiveNon Flammable, Film Free

> Quick Overview

flooring : Vinyl flooring : Carpeting :Machinery Kitchen equipment : Enginecleaning : Paint preparation and most porousand non porous surfaces. Safe to use in foodpreparation areas, hospitals, animalhousing, garages and nursing homes.Applied by hand or via a pressure washer.

> Availability5 litre containers

> How to order this product

FOR EXAMPLE3 / ASTRO MASTERSOLVE / AMS5

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF

NON SLIP FLOOR PAINT> Trade Name ASTRO NON SLIP COAT

> Product DescriptionAn anti-slip floor paint based on an epoxyester formulation that dries to a toughdurable finish. Has good resistance to water,oils, mild acids and alkalis. Available in 3colours. Recommended Use. Ideal for use onconcrete, timber and steel floors. Anti-slipproperties are produced by the use of organicpowder which eliminates the risk of sparkingfrom metal wheels, therefore providingenhanced safety to potentially slippery areas.Suitable for use on timber, steel andconcrete floors (in entrance halls, garages,

A Non Slip Paint for use on concrete, timber orsteel floorsTypical applications: Factory floors, WorkshopsGarages, Public buildingsSpray, Roller or Brush applicationMedium Green, Tile Red or Mid Grey

> Quick Overview

canteens, workshops, etc). Possesses goodresistance to water, oils, acids and alkalis.Anti-slip properties produced by the use oforganic powder gives enhanced safety toslippery areas. The use of organic powder to produce the anti-slip properties haseliminated the risk of sparking from metalwheels and tools, unlike some floor coatingsthat contain sand or grit. This anti-sparkfeature provides extra safety, for example in factories or chemical plants, where sparksare hazardous.

> Availability5 litre tins

> How to order this product

FOR EXAMPLE10 / ASTRO NON SLIP COAT / TILE RED

PLEASE QUOTEQTY / TRADE NAME / PRODUCT COLOUR

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 63: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

63

SASH WINDOW & PATIO DOOR SEALSReplacement and retrofit sash window seals and patio door seals to weatherproof, draughtproof, conserve energy and reduce intrusive noise.

SASH WINDOW PARTING BEAD SEALS> Product DescriptionThis unique design with a single hingeand 2 independently acting flippers willprovide an excellent solution. It can beused as a direct fit in an 8mm groove orin conjunction with our 10x10 channel.

A = Groove size: 8mmB = Groove size: 8mm (min)C = Height: 17mmD = Suits gaps: 10mm - 13mm3m lengthsTo order, quote Ref No. White -ADPB01WX Brown - ADPB02BX

PARTING BEAD BRUSH SEAL> Product DescriptionThis solid design of parting bead providean excellent durable bead that can beused as a direct fit in an 8mm groove orin conjunction with our 10x10 channel.Available with or without brush fin pile.Brush pile 8.5mm. Suits gaps 10-13mm.

A = Groove size: 8mmB = Groove size: 8mm (min)C = Height: 17mmD = Width: 14mm including brush3m lengthsTo order, quote Ref No. White -ADPBBW Brown - ADPBBB

PARTING BEAD CARRIER> Product Description10mm x 10mm external channel for use with8mm direct fit parting beads. Will take 8mm.Direct Fit or Double Flipper Parting Bead.

A = Groove size: 10mmB = Groove size: 10mm

3m lengthsTo order, quote Ref No. White -ADPB01WXC Brown - ADPB02BXC

IMPLY> Product DescriptionImply is a spring seal for either surface mounting or inset. This product is often used as a mid-rail seal.

A = Kerf size: 2.5 to 3mm

B = Kerf size: 6mm (min)C = Suits gap 2 :6.5mmD = Flipper length: 6.5mmE = Base length: 9.5mm

2.2m lengths, To order, quote Ref No.White - ADIM02W Brown - ADIM02B

ASTRO CARRIPILE CP SEALUsed as an alternative to Imply. Ideal for top, bottom and meeting rails of patio doors etc. PVCu carrier andpolypropylene fin pile for added weather protection.

CP2> Product DescriptionCentre leg carrier for mechanical fittinginto slot and can be used in conjunctionwith 4.8mm base pile. Brush pile 6mm:suits gaps 2 - 3.5mm. Brush pile 8.5mm:suits gaps 3.5 - 6.0mm.

A = Kerf size: 2.7mmB = Kerf size: 3mm C = Groove size: 6mmD = Groove size: 8mm2.2m lengths. To order, quote Ref No.White - ADCP2W Brown - ADCP2B.State length of brush required.

> Order these productsOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

ASTRODRAFTD R A F T A N D W E A T H E R S E A L S

Page 64: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

64

ASTRO CARRIPILE CP SEAL SELF ADHESIVEFor top, bottom and meeting rails of patio doors etc. PVCu carrier and polypropylene fin pile for added weather protection. Self-adhesive backing for speed and ease of fitting.

CP3> Product Description

Flat based carrier supplied with selfadhesive and can be used in conjunctionwith 4.8mm base pile.A = Groove size: 8mmB = Groove size: 3.5mm

Brush pile 6mm: suits gaps 2 - 3.5mm. Brush pile 8.5mm: suits gaps 3.5 - 6.0mm.

2.2m lengthsTo order, quote Ref No. White - ADCP3W Brown - ADCP3B.State length of brush required.

DOOR & GLAZING SEALSEasy fit compression seals for draught and weather sealing doors andwindows. Suitable for all types of doors and windows and void filling.

E PROFILE DOOR/GLAZING SEAL> Product Description

Black, Brown or White 9mm x 4mm 100M coils only.To order, quote Ref No. White - ADEC94100W Brown - ADEC94100B Black - ADEC94100BLK

P PROFILE DOOR/GLAZING SEAL> Product Description

Black, Brown or White 9mm x 5.5mm 100M coils only.To order, quote Ref No.White - ADPP9100W Brown - ADPP9100B Black - ADPP9100BLK

> Order these productsOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 65: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

65

BUBBLESEAL 6MM DOOR GLAZING SEAL> Product Description

6mm Bubble Seals offer high resilience, low permanent set, soft feel but good resistance to abrasion and provides an excellent seal for various applications.A = 6.0mm B = 3.0mm Kerf Available Colours: Brown, Black, White & Light Oak.

Supplied on 100m coils. To order, quote Ref No. White - ADTBX6W Brown - ADTBX6B Black - ADTBX6BLK Light Oak - ADTBX6LO

BUBBLESEAL 8MM DOOR GLAZING SEAL> Product Description

8mm Bubble Seals offer high resilience, low permanent set, soft feel but goodresistance to abrasion and provides an excellent seal for various applications.A = 8.0mm B = 3.0mm Kerf

Available Colours: Brown, Black, White & Light Oak. Supplied on 100m coils. To order, quote Ref No. White - ADTBX8W Brown - ADTBX8B Black - ADTBX8BLKLight Oak - ADTBX8LO

DOOR BOTTOM SEALS

ASTRO WEATHERSTOP WS SEAL > Product Description

Astro Weatherbar offers an improved weather performance over galvanised and plainplastic alternatives in the market, and with a built in flexible flipper will offer excellentlong last protection. It robust design will with stand the extremes of weather conditionsand general foot traffic.

A = Groove size: 6 - 6.3mm B = Groove size: 8mm (min) C = Height: 12mm D = 5mm3m lengths. To order, quote Ref No. Brown - ADWSO4BX

ASTRO H CARRIER> Product Description

An Aluminium carrier in Mill or Gold finish containing a Black Brush pile in variouslengths. Carrier Colour Mill (M) or Gold (G) Lengths of Carrier 914mm or 2134mm BrushLength 22mm, 30mm, 40mm or 50mm.

To order, quote Ref No.ADHCAR/M or G/914 or 2134/Brush Length

> Order these productsOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 66: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

66

ACOUSTIC AUDIO PERIMETER DOOR SEAL

> Trade Name ASTRO AS AUDIO SEAL

> Product DescriptionSound Reduction of Rw37dB. Choice ofColours. Astro AS Audio Seal. Thisrevolutionary Audio Seal has beendesigned and manufactured to provideand effective barrier to seal perimetergaps in high performance doorsetassemblies. The product is designedand expected to achieve a noisereduction level of Rw42dB however

is untested at present for levels aboveRw37dB due to door performance levelsin the industry. Seal Length: 2100mm.Sold Individually.

Colours: Black (AFASAUDIOBLK), Brown (AFASAUDIOBRN)White (AFASAUDIOWHT), Light Oak (AFASAUDIOLO)

> How to order this product

FOR EXAMPLE10 / ASTRO AS AUDIO SEAL / AFASAUDIOBLK / BLACK

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / COLOUR

A = 14.0mmB = 10.0mmC = 9.0mmD = 5.0mm

ACOUSTICRATED

UNDER DOOR DRAUGHT EXCLUDER> Trade Name ASTRO UNDER DOOR DRAUGHT EXCLUDER

> Product DescriptionAn under door draught excluder that canbe easily pushed under doors on smoothsurfaces like parquet, wooden floors,PVC and laminates. They can be easilyshortened in size to fit your door exactly.

• Stops draughts, dust, cold, warmth and noise

• For gaps of 22mm

• Simple to mount without tools• Removable without trace• No adhesive• For indoor and outdoor use• Can be cut to size• 1 colour: dark brown/grey

Seal Length: 950mm Seal Width: 100mmOrder code: ADUDDE

> How to order this product

FOR EXAMPLE10 / ASTRO UNDER DOOR DRAFT EXCLUDER/ ADUDDE

PLEASE QUOTEQUANTITY / TRADE NAME / PRODUCT REF / COLOUR

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 67: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

67

7.5

10

11

6.85

6.75

6.55

11

6.25

8

10.5

SCHLEGEL AQUAMAC DRAUGHT PROOFING FOR TIMBER DOORS & WINDOWS> The Aquamac RangeSchlegel - AQUAMAC Weatherseal fortimber windows and doors. The onlynon-rot weatherseal specifically fortimber windows and doors AQUAMACweatherseal has been developed inconsultation with Schlegel customers to offer the widest range of sealspossible for timber windows and doors.

The unique design has made Aquamacimpervious to paint and stain, while

still providing some of the best energysaving performance characteristicscurrently available. Specifically designedto meet the different demands oftimber windows and doors, AQUAMACmaintains consistently high standardsof energy efficiency, often exceedingany long-term window performanceguarantees.

B = Brown W = White BLK = Black

> Aquamac FeaturesAvailable in 3 standard colours -white, brown and black. Backed by a LIFETIME GUARANTEE.Compensates for window movement.Conforms to BS644/BBA approved.Doesn't shrink or stretch, even in extreme climatic conditions. Excellent memory - retains its originalshape for a consistent weatherseal.Exceptional performance maintained over a wide temperature range. High wear resistance reduces wear & tear.Immune to the effects of UV light & ozone.IMPERVIOUS TO PAINT AND STAIN - reducing decoration maintenance costs.Lower insertion forces speed up fitting by 15%. Environmentally friendly - CFC free outstanding energy efficiency.Water repellent foam is unaffected by rot, mould or mildew.Will not freeze to mating surfaces.

SCHLEGEL REBATED RANGE10.9

9.0

Available only as a coil in 100 metre or250 metre lengths. ADAM21/Colour

AQUAMAC 21

Available only as a coil in 100 metre or200 metre lengths ADAM33/Colour

AQUAMAC 33

Available only as a coil in 100 metre or200 metre lengths ADAM4846/Colour

AQUAMAC 4846

Available only as a coil in 100 metre or300 metre lengths ADAM63/Colour

AQUAMAC 63

Available only as a coil in 100 metre or250 metre lengths ADAM109/Colour

AQUAMAC 109

Available only as a coil in 100 metre or250 metre lengths ADAM120/Colour

AQUAMAC 120

> How to order this product

FOR EXAMPLEADAM21/W/100M OR ADAM63/BLK/300M

PLEASE QUOTEADAM/TYPE/COLOUR/COIL SIZE

Online:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 68: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

68

SCHLEGEL RETRO FIT RANGE> Schlegel Features

Q-Lon Seal Performance not affected by painting over

Excellent MemoryLow Friction10 Year Life Span

Exterior / Interior door and windowperimeter seal.ADAMRET21BB - Brown PVC-u BoxCarrier with a Brown Q-Lon Seal 2050mm ADAMRET21BW - White PVC-u BoxCarrier with a White Q-Lon Seal 2050mm

QLON RETRO 21B Exterior / Interior door and windowperimeter seal.ADAMRET21LB Brown PVC-u H Carrierwith a Brown Q-Lon Seal 2050mm ADAMRET21LW White PVC-u H Carrierwith a White Q-Lon Seal 2050mm

QLON RETRO 21 LExterior / Interior door and windowperimeter seal.ADAMQLSBSB Brown PVC-u Box Carrierwith a Brown Q-Lon Seal 2050mmADAMQLSBSW White PVC-u BoxCarrier with a White Q-Lon Seal 2050mm

Q-LON SBS

Exterior / Interior door and windowperimeter seal.ADAMQLPSB Brown PVC-u H Carrier with a Brown Q-Lon Seal 2050mm ADAMQLPSW White PVC-u H Carrierwith a White Q-Lon Seal 2050mm

Q-LON PS Interior door and window perimeter seal, ideal for sliding applications.ADAMSBSB Brown PVC-u Box Carrierwith a Brown Pile Seal 2050mm ADAMSBSW White PVC-u Box Carrierwith a White Pile Seal 2050mm

SHARKSEAL SBSInterior door and window perimeter seal, ideal for sliding applications.ADAMPSB Brown PVC-u H Carrier with a Brown Pile Seal 2050mm ADAMPSW White PVC-u H Carrier with a White Pile Seal 2050mm

SHARKSEAL PS

3.6

14

2

9.1

14

17.5

7.75

3.75

Available only as a coil in 100 metre or350 metre lengths ADAM48/Colour

AQUAMAC 48Available only in 2100mm lengthsADAM89/Colour

AQUAMAC 89Available only as a coil in 100 metre or125 metre lengths ADAM124/Colour

AQUAMAC 124

> How to order this product

FOR EXAMPLEADAM21/W/100M OR ADAM63/BLK/300M

PLEASE QUOTEADAM/TYPE/COLOUR/COIL SIZE

SCHLEGEL REBATED RANGE

> Order these productsOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

9

Page 69: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

RP35SI> Product DescriptionThe RP35Si is a surface mounted version ofthe RP8Si designed for easy installation andpost door hanging fitting. A mediumtemperature automatic smoke/acousticdoor bottom seal with an extruded siliconsealing component. RP35Si is springloaded to lift clear of the floor as soon as the door leaf is opened by a fewmillimetres and is operated automaticallyby pressure against the door jamb. Location: Single and double, butt hingeddoors. Min/Max Gap: 3mm/13mm. SealSizes (mm): 1220, 1070, 920, 820, 600,380. Seals cut back to exact size, 295mm

min. Standard Finish: Anodised Satin Clear.Durability tested to over 1,000,000 cycleswithout failure.

ApprovalsAcoustic: UK/EU: Conforms to ApprovedDocument E. Tested to BS EN ISO 140.3, BSEN ISO 717.1, BS 2750,BS 5821.Fire & Smoke: AUS/NZ: Conforms to BCASpec. C3.4. Tested to AS 1530.4, AS/NZS1905.1 & AS/NZS 1530.7. UK/EU: Conformsto Approved Document B. Tested to ISO CD5925-1 (similar to BS EN 1634.1, BS 476 Part20 & 22, Sec. 31.1).

H

ACOUSTIC DOOR BOTTOM SEALS - AUTOMATIC

RP38SI> Product DescriptionA medium temperature smoke door bottomseal with an extruded silicon sealingcomponent. The RP38Si is a heavy dutyautomatic seal which is spring loaded to liftclear of the floor as soon as the door leaf isopened by a few millimetres. The seal isoperated automatically by pressure againstthe door jamb on the adjusting screw. Itseals when the door closes, retractsautomatically when the door is opened andis self levelling. RP38Si can be face mountedor semi-morticed. It is adjustable for leftand right handed operation.

When semi morticing RP38Si into doubledoors that require rebated meeting stiles,specify 50mm minimum door thickness.With plain meeting stiles, specify 40mmminimum thickness. Location: Single anddouble butt hinged door bottoms. Min/MaxGap: Up to 13mm. Seal Sizes (mm): 1500,1220, 1070, 920, 610, 450. Seals cut back toexact size, 300mm min. Longer lengths tospecial order. Standard Finish: AnodisedSatin Clear Durability tested to over1,000,000 cycles without failure.

H

> Order these productsOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Acoustic

Ambient (cold) Smoke up to 70oC

Medium Temp. Smoke 200oC for 30 minutes (Smoke Doors)

Fire & Hot Smoke Fully developed fires exceeding 600oC and hot smoke beyond 200oC (Intumescent Fire Seals)

Insects and Vermin

Weather

Energy, Draughts & Dust

Fire (approved)

Access & Mobility

Light

Raven Door Sealing Systems are available to combat draughts, dust, rain,noise, heat loss, heat gain, fire, smoke and stray light. The following is aselection of the Raven Smoke Rated Seals available from the comprehensiverange shown on www.astrodraft.com. All seals are only available in ananodised satin clear finish. L = Light Duty seals include those typically used in residential applicationsor light traffic areas. M = Medium Duty seals are used in commercialapplications such as office spaces, shops, commercial accommodation ormedium traffic areas. H = Heavy Duty seals are designed for areas with ahigh level of use such as public hospitals, airports, factories, shoppingcentres or areas with a large through flow of pedestrian and wheeled traffic.

FOR ADDITIONAL RAVEN SEALSPLEASE VIEW OUR WEBSITE OR GO TO THE DOOR PROTECTIONSECTION OF THIS CATALOGUE.

69

Page 70: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

RP60 (RESIDENTIAL)> Product DescriptionA face mounted automatic door bottomseal which is spring loaded to lift clear ofthe floor as soon as the door leaf is openedby a few millimetres. The RP60 is operatedautomatically by pressure against the doorjamb on its adjusting screw, and itincorporates concealed fixings.

Location: Single or double butt hingeddoors. Min/Max Gap: 3mm/15mm.Seal Sizes: 915mm only between doorstops. Unit cuts back to 450mm min.Standard Finish: Anodised Satin Clear.Durability tested to over 500,000 cycleswithout failure.

L

DOOR BOTTOM SEALS

RP4B THRESHOLD SEAL> Product DescriptionThreshold Seal to be used in conjunctionwith RP4T. Location: Door bottom andsill of single and double butt hingeddoors. Min/Max Gap: 23mm/25mm.Seal Sizes: Available in 1000mm stock

lengths. Maximum Length: 3000mm.Standard Finish: Anodised Satin Clear.Threshold Bar only, image shows RP4B and RP4T.

M

RP4T DOOR BOTTOM SEAL> Product DescriptionA storm proof door bottom seal wheremaximum weather protection is required.The multi blade seal defies rain infiltration.RP4T can be fitted to the square cutbottom of a door without removing thedoor, provided there is a gap of 25mmunder the door before the seal is installed.It is quick and easy to fit to both doorand sill. The sealing section is slotted foradjustment.

Location: Roll-up doors. Single anddouble butt hinged doors (if used with threshold plate) or bulkheadapplications. Min/Max Gap: Userdetermined. Seal Sizes: Available in1000mm stock lengths. MaximumLength: 3000mm. Standard Finish:Anodised Satin Clear.

H

70

> Order these productsOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 71: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

71

DOOR BOTTOM SEALS

RP30> Product DescriptionA concealed sweep type seal which isfitted in a morticed groove that has been cut into the bottom of a door. Thegroove should be sufficiently deep toallow packing for adjustment.

Location: Door bottoms, meeting stiles,bumper strip. Min/Max Gap: 3/8mm(user determined). Seal Sizes: Availablein 1000mm or 2250mm stock lengths. Maximum Length: 3000mm. StandardFinish: Anodised Satin Clear. Used inConjunction: RP13, RP82 (essential).

H

RP31> Product DescriptionA heavy duty sweep type seal, similar toRP30 but with greater compression,which is fitted to the bottom of a doorwith concealed fasteners. The design ofthe seal does not allow adjustment so itshould not be installed in situationswhere adjustability is required.

Location: Door bottoms, meeting stiles,bumper strip. Min/Max Gap: Userdetermined. Seal Sizes: Available in1000mm or 2250mm stock lengths. Maximum Length: 3000mm.Standard Finish: Anodised Satin ClearUsed in Conjunction: RP82 (essential).

H

> Order these productsOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

RP26> Product DescriptionA heavy duty EPDM sweep seal for doorbottoms of outward opening doors. Ithas slotted holes for the adjustment ofits concealed fixings, behind a push-incover strip.

Location: Door bottoms, single or doubleoutward opening, butt hinged or tilt-updoors can be used as an astragal seal.

Min/Max Gap: 5/20mm (user determined).Seal Sizes Available: in 1000mm or2250mm stock lengths.

Maximum Length: 3000mm.Standard Finish: Anodised satin clearUsed in Conjunction: Raven thresholdplates such as RP19.

H

71

Page 72: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

DOOR FRAME OR PERIMETER SEALS

RP120 & RP150 DELTA SEALS™> Product DescriptionRP120 and RP150 are co-extruded PVC,acoustic and smoke seals. Discreetlylocated in the protected corners ofrebated timber or steel door frames.RP120 and RP150 are suitable for newand retrofit applications.

Location: Around rebated frames ofsingle or double butt hinged doors andwindows. Min/Max Gap: 3mm to 5.5mm.

Seal Sizes: Single or double doorsets.Standard Finish: Black, Brown & White.(PVC) Fixing Method: Self adhesive.Note: Contact surface must be clean,smooth and if painted, well cured. SealMaterial: Rigid and flexible flame retardantPVC

Used in Conjunction: Raven door bottomseals, threshold plates and astragal seals.

Seals designed for the gap between the door and the frame (up and down the jamb and across the head of the door) are termed“door frame or perimeter seals”. These are generally compression seals, some are mounted on the door stop or directly onto a plainframe of the door, thereby providing a door stop seal. Some seals can be fitted to the door or neatly rebated into the frame itself.

M

RP10SI> Product DescriptionA neat compact door stop frame sealwhich has proven to be an effectiveacoustic and medium temperature smokeseal. It is quick and easy to install ontothe door frame as a door stop. It isadjustable, using concealed fixing slotsfor a precision fit. The multi blade sealconsiderably reduces the leakage ofnoise, smoke and air movement. Theminimum deflection of the sealing finscreates maximum efficiency, offering alarge tolerance for door movement overtime. The seal can be mitred or butt

jointed to give an integrated aestheticappearance.

Location: Head and jambs of single ordouble butt hinged doors. Min/Max Gap:0mm/10mm. Seal Sizes: Single or doublestandard or long doorsets. StandardFinish: Anodised Satin Clear. Used inConjunction: Raven door bottom seals,astragals and thresholds. Note: If fixedto existing rebated frames of singledoors, specify a long backset door latch.

M

RP73> Product DescriptionAn extremely flexible coextruded PVCsweep seal that fits into a saw kerfgroove cut into the frame or door. Itholds tight radii and compound curveswhen bent around a frame. It resists UV,ozone, mildew and colour change.

Location: Around sliding doors, doorframes and pivot doors. Min/Max Gap:6mm to 8mm. Seal Sizes: 1000mmincrements to 200 metre (coil). Note: For noise, specify two rows of seal.

M

72

> Order these productsOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 73: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

73

DOOR FRAME OR PERIMETER SEALS

ASTRAGAL/MEETING STILE SEALS

RP93SI> Product DescriptionA weather, smoke and acoustic sealsuitable for plain or rebated frames.RP93Si is quick and easy to install (mitrejoint only), to the head and jambswithout removing the door. Slotted forinstallation adjustment, the soft siliconbulb accommodates a tighter seal and,with a tamper proof cover strip, providesa fit and forget feature. Location: Headand jambs of single or double butthinged doors.

Min/Max Gap: 0mm/ 6mm.Seal Sizes: Single or double doorsets. Standard Finish: Cover strip only.Anodised satin clear. Used inConjunction: RP8Si, RP38Si, RP99Si,RP70Si. Note: If fixing to rebated framesof single doors specify a long backsetdoor latch. The tamper proof aluminiumcoverstrip is not recommended forremoval once installed, refer RP78Si orRP10Si for this feature.

M

RP94SI> Product DescriptionA weather, smoke and acoustic seal,suitable for rebated frames. RP94Si isquick and easy to install, either mitred orbutt jointed to the head and jambswithout removing the door. Slotted forinstallation adjustment, the soft siliconbulb accommodates a tighter seal andwith a tamper proof cover strip, providesa fit and forget feature.

Location: Head and jambs of single ordouble butt hinged doors. Min/Max Gap:0mm/6mm. Seal Sizes: Single or doubledoorsets. Standard Finish: Cover striponly. Anodised satin clear. Used inConjunction: Raven door bottom seals,astragal and threshold plates. Note: The tamper proof aluminium coverstripis not recommended for removal onceinstalled, refer RP78Si for this feature.

M

RP16SI> Product DescriptionA medium temperature smoke andacoustic astragal seal for use with plainor rebated meeting stiles on double doors.The aluminium trim cleanly conceals thesealing portion of the seal. If necessarythe leg of the aluminium can be cut out(checked) to allow for any locks andlatches. It is used where only one door leaf

is active. The seal also improves securityand when two are fitted (one on eachleaf), noise infiltration is greatly reduced.

Location: Meeting stiles of double doors, butt hinged. Min/Max Gap: 2.5mm/8mm.Seal Sizes: 2250mm or 2500mm stocksizes. Standard Finish: Anodised Satin Clear.

M

> Order these productsOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

73

Page 74: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

RP71SI> Product DescriptionA smoke and acoustic astragal sealdesigned for plain or rebated meetingstiles of timber double doors where acentre latch bolt may be required, orwhere both doors are active. The sealingportion is made from silicon rubber whichare effective in the sealing of noise andweather. Two seals are installed onto onedoor stile, allowing space for a latchbetween the seals. The legs of the sealscan be cut out (checked) to accommodate

the latch bolt front plate, therebyproviding a continuous seal (minimumdoor thickness subject to centre latch anddimensions of morticed door bottom seals).

Location: Double butt hinged and centrepivot double acting doors. Min/Max Gap:3mm to 4mm. Seal Sizes: 2250 or2500mm stock sizes. Standard Finish:Anodised Satin Clear.

M

GLASS DOOR SEALS

RP103 & RP104> Product DescriptionClear polycarbonate astragal seals for 10 or 12mm thick frameless glass doors.Woven pile sealing strip is combinedwith a weather fin.

Location: Double butt hinged and centrepivot double acting doors. Min/Max Gap:8mm. Seal Sizes: 3000mm stock sizes.Standard Finish: Clear.Seal Sizes: RP103 - 10mm RP104 - 12mm

M

RP103

RP104

RP79/RP88> Product DescriptionGlass door draught excluder strips by Raven.Uses an Anodised Aluminium (15 microns)carrier. This glass door seal has a built in hot smoke seal which is undergoingUK/EU certification so we are selling thisproduct purely as a draught seal until UKfire certification is granted. The RavenRP88 seal is for 10mm thick glass doors.

The Raven RP79 seal is for 12mm thickglass doors. Weatherseal is a black,polypropylene woven pile combined with a weather fin.

Seal holder is all Aluminium constructionwith a Satin Clear (Silver) finish. Bothtypes, RP79 and RP88, are for pre-installation gaps of 8mm to 9mm. Bothtypes sold in 3 metre lengths. Fixing iswith double sided adhesive tape (pre-fittedin the carrier). Contact surfaces must beclean, smooth and, if painted, well cured.

To seal the bottom of the door wesuggest the Raven RP74 or RP75 SelfAdhesive Brush Seals.Seal Sizes: RP79 - 12mm RP88 - 10mm

74

> Order these productsOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 75: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

THRESHOLD PLATES

RP13> Product DescriptionA low profile threshold plate which isoften used in conjunction with doorbottom seals to prevent rain infiltration.

Location: Door sills. Sizes: 1000 or2000mm stock lengths. Standard Finish:Anodised Satin Clear. Used in Conjunction:Raven door bottom seals.

M

RP77> Product DescriptionA heavy duty door threshold. The ribbedextrusions can be positioned back to backto provide a two way threshold ramp.Location: Door sill or used to provide aramp frame for wheelchair access and

internal door mats. Sizes: 1000 or2250mm stock lengths. Standard Finish:Anodised Satin Clear. Used inConjunction: Raven door bottom seals.

H

RP95> Product DescriptionA low profile threshold plate used inconjunction with door bottom seals toprevent rain, draught, smoke and noiseinfiltration.

Location: Door sills. Sizes: 1000mm or2000mm stock lengths. Standard Finish:Anodised Satin Clear. Used inConjunction: Raven door bottom seals.

H

RP97SI> Product DescriptionA threshold plate seal particularly suitedfor outward opening butt hinged plantroom and emergency exit doors. Whenused in conjunction with RP93Si and RP16Sian excellent smoke and acoustic systemis achieved. For acoustic applications thevoid under the RP97Si should be filledwith sound foam or other suitable material.

Location: Door sills abutting outwardopening butt hinged plant room oremergency exit doors. Min/Max Gap:Compression of seal 0mm/2mm.Size: 1000mm stock lengths. StandardFinish: Anodised Satin Clear. Note:Specify order length wider than dooropening to provide a neat detail at doorframe (see illustration).

H

RP115> Product DescriptionA low profile threshold plate used inconjunction with Raven door bottomseals to prevent rain, draught, smokeand noise infiltration.

Location: Door sills. Sizes: 1000 or2250mm stock lengths. Standard Finish:Anodised Satin Clear. Used inConjunction: Raven door bottom seals.

H

> Order these productsOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

75

Page 76: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

THRESHOLD PLATES

RP117SI> Product DescriptionThe RP117Si is a weather, smoke andacoustic threshold plate seal suited tooutward opening butt hinged doors. It isideal for use with a panic type exit device(by others). For acoustic applications thevoid under the threshold should be filledwith sound foam or other suitable

material (by others). Location: Door sills.(Butt hinges recommended). Sizes: 1000or 2000 stock lengths. Standard Finish:Anodised Satin Clear. Used in Conjunction:Raven door frame seals, RP118Si andsuitable panic type exit devices.

H

DISABLED ACCESS RAMP> Product DescriptionThreshold Ramps to improve wheelchairaccess. Quick and easy permanentinstallation using construction adhesives.Can also be used as a portable ramp.Ramp gradient is 1:8. Moulded from slipresistant recycled rubber. Maintenancefree. Available in two sizes. Access RampModel ADRPA025 dimensions: 1010mm

wide x 200mm deep x 25mm high.Weight approx 3.5kg. Access RampModel ADRPA050 dimensions: 1140mmwide x 400mm deep x 50mm high.Weight approx 12.5kg. Either ramp modelcan be cut to reduce the height to exactrequirements (see images). The largermodel is built for very heavy duty.

RP15> Product DescriptionA nylon brush strip seal that is ideal forinstallations where larger gaps areencountered. Location: Door bottoms,single, double or sliding. Min/Max Gap:Up to 25mm (user determined).

Seal Sizes: 1000 or 2250 stock lengths.Standard Finish: Anodised Satin Clear.Used in Conjunction: Raven thresholdplates.

H

76

> Order these productsOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

Page 77: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

BRUSH STRIP SEALS

RP49> Product DescriptionA versatile nylon brush seal with a 90°angle aluminium carrier. Location: Doorframe, door stiles of sliding doors

(user determined). Seal Sizes: 1000 or2250 stock lengths. Standard Finish:Anodised Satin Clear.

H

RP74> Product DescriptionA nylon brush seal with a self adhesivealuminium carrier. Mounted to the insideor outside door head and bottom face,RP74 provides a very neat sealingsolution with the advantage of final onsite installation which overcomes

unforeseen floor or sill variation.Location: Door bottoms, single, double orsliding and double acting. Min/Max Gap:Up to 13mm (user determined). SealSizes: 1000 or 2250 stock lengths. Usedin Conjunction: Raven threshold plates.

H

RP75> Product DescriptionAs RP74 above but with a 19mm brush.Location: Door bottoms, single, double orsliding and double acting. Stiles on tilt updoors. Min/Max Gap: Up to 19mm (user

determined). Seal Sizes: 1000 or 2250stock lengths. Used in Conjunction:Raven threshold plates.

H

> Order these productsOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

77

Page 78: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

MAGNETIC SEALS

RP39> Product DescriptionA refrigeration type vinyl magnetic stripin an anodised aluminium housing,which provides a very tight seal for steelclad doors and jambs, and may be usedas a stop. For timber doors, a thin steelstrip can be attached to the door face.The magnetic strip has sufficient closingstrength that latches are not required. Itcan also be used in pairs on meetingstiles of timber doors. Location: Single or double doors, sliding doors and stiles,

heads and jambs or bulk head applications.Butt hinges recommended. Min/MaxGap: 4mm to 8mm (meeting stiles).Standard Finish: Anodised Satin Clear.Seal Size: 2250mm stock lengthsUsed in Conjunction: Door bottom seals.Note: As an astragal seal, RP39 is notrecommended for highly active doors, i.e.it is best suited to infrequent use anddoor closer hold-open applications.

M

RP65> Product DescriptionA refrigeration type PVC magnetic stripin an anodised aluminium channel, thatis morticed into the stiles of hardwooddouble timber doors, either pivot, slidingor butt hinged, to form an effectiveastragal. It provides a very positive sealand has sufficient closing strength thatlatches may not be required. Location:Double swinging doors and sliding doormeeting stiles. Min/Max Gap: 5mm to7mm. (swing doors).

Seal Size: 2250 stock lengths. StandardFinish: Anodised Satin Clear. Used inConjunction: Door bottom and frameseals. Note: Centre latching cannot beused in this configuration. The aluminiumchannel is designed to fit into a 16.5 x12mm mortice. The magnetic seals arelocked to prevent ‘creeping’. RP65 is notrecommended for highly active doors. i.e:best suited to infrequent use and doorcloser hold open applications.

M

RP85> Product DescriptionA magnetic seal that is fixed to the headand jambs as a door stop where steelclad doors are used. For timber doors, athin steel strip can be attached to thedoor face. The magnetic strip hassufficient closing strength that latchesare not required.

Location: Head and jamb for single anddouble broad butt hinged doors.Min/Max Gap: 0-4mm (user

determined).Seal Sizes: single or double doorsets Standard Finish: Anodised Satin Clear.Used in Conjunction: Door bottom sealsand astragal seals. Note: If fixing torebated frames of single doors, specify alarge backset door latch.

M

> Order these productsOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

78

Page 79: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

79

SELF ADHESIVE SEALSSuperior quality self adhesive door and window frame weather strip. These soft rubber EPDM seals are set into the corners between the door stop and frame providing a compression seal.

RP48> Product Description

Available in white or brown. Location: Around door and window frames. Min/Max Gap: 3/5mm (user determined). Seal Sizes: 5m coil pack length (2x2.5m).

L

RP55> Product Description

Available in white or brown. Location: Around door and window frames.Min/Max Gap: 3/6mm (user determined).Seal Sizes: 5m coil pack length (2x2.5m).

L

RP59> Product Description

Available in white or brown. Location: Around door and window frames.Min/Max Gap: 2/4mm (user determined). Seal Sizes: 5m coil pack length (2 x 2.5m).

L

RP61> Product Description

A self adhesive soft woven pile draught seal which is ideal for sliding doorand window applications. Polypropylene fibre seal in grey. Location: Aroundwindow and door frames. Min/Max Gap: 3/5mm (user determined). SealSizes: 5m (max). Can be cut to length required.

L

RP108> Product Description

Available in grey or white. A multi purpose self adhesive EPDM compressionseal. Location: Multi-use (user determined). Min/Max Gap: 6/8mm (userdetermined). Seal Sizes: 2m coil pack.

L

> Order these productsOnline:www.astroflame.com phone: 0800 023 2482 or email [email protected]

79

Page 80: MANUFACTURERS OF PASSIVE FIRE STOP …Rebate Fit Acoustic & Smoke Perimeter Seals. > Quick Overview All seals are also available in a pre-pack single door set containing 2x 2.1M &

ASTROFLAMEM A N U F A C T U R E R S O F PA S S I V E F I R E S T O P P R O D U C T S

AS PART OF OUR POLICY OF ONGOING IMPROVEMENTS, WE RESERVE THE RIGHT TO MODIFY, ALTER OR CHANGE PRODUCT SPECIFICATIONS WITHOUT GIVING NOTICE. PRODUCT ILLUSTRATIONS ARE REPRESENTATIONS ONLY. ALL INFORMATION CONTAINED INTHIS CATALOGUE IS PROVIDED FOR GUIDANCE ONLY, AND AS ASTROFLAME FIRESEALS LTD HAS NO CONTROL OVER THE INSTALLATION METHODS OF THE PRODUCTS, OR OF THE PREVAILING SITE CONDITIONS, NO WARRANTIES EXPRESSED OR IMPLIED AREINTENDED TO BE GIVEN AS TO THE ACTUAL PERFORMANCE OF THE PRODUCTS MENTIONED OR REFERRED TO, AND NO LIABILITY WHATSOEVER WILL BE ACCEPTED FOR ANY LOSS, DAMAGE OR INJURY ARISING FROM THE USE OF THE INFORMATION GIVEN OFPRODUCTS MENTIONED OR REFERRED TO HEREIN. THE INFORMATION IN THIS CATALOGUE TO THE BEST OF OUR KNOWLEDGE IS TRUE AND ACCURATE AND BASED UPON CURRENT TEST DATA AND IS SUPPLIED FOR YOUR GUIDANCE ONLY. CUSTOMERS SHOULDSATISFY THEMSELVES TO THE SUITABILITY OF THE PRODUCT IN ITS INTENDED USE AND NO GUARANTEE IS GIVEN OR IMPLIED SINCE THE CONDITIONS OF ACTUAL USE ARE BEYOND OUR CONTROL. ASTROFLAME FIRESEALS LTD, DISCLAIM ANY LIABILITY FOR LOSS, DAMAGE OR OTHER EXPENSE ARISING FROM THE USE OF INFORMATION, DATA OR PRODUCTS MENTIONED OR REFERRED TO AND RESERVE THE RIGHT TO CHANGE ANY DETAILS OR SPECIFICATIONS WITHOUT NOTICE.

UK Office: Astroflame Fireseals Ltd, Unit 8, The I.O. Centre, Stephenson Road, Segensworth, Fareham, England PO15 5RU

T 0800 023 2482 (01329 844500) Tel Intl +44 1329 844500 F 0800 023 2483 (01329 844600) Fax Intl +44 1329 844600E [email protected] www.astroflame.com www.astrodraft.com A/GROUP SEP 13 16


Recommended