MANUFACTURINGRANGE OVERVIEW
leadership with passion
3019
3516
– 0
3-20
19
LU-VE S.p.A - Uboldo (Va), Italy Heat exchangers for industrial and commercial refrigeration, air conditioning and industrial applications.
LU-VE S.p.A. is the holding company of LU-VE Group. In 1985 LU-VE S.p.A. acquired Contardo S.p.A., established in 1928. Production began in 1986.
LU-VE quickly made its mark thanks to high standards of quality, new solutions designed in its own laboratories and to the care taken with the appearance of its products. (Beautiful outside - Revolutionary inside).
It was the first company in the world to apply avant-garde solutions to commercial and industrial refrigeration:• grooved tube technology;• specialized heat exchange surfaces; • certified performance levels;• innovative materials and colours;• advanced design.
The success of LU-VE in the international market stems from its research and development policy, its great respect for the environment and its rigorous ethical and commercial principles.
In 2000, LU-VE was the first company in Europe to attain the prestigious Eurovent “Certify-All” certification for the entire range of its products: unit coolers, condensers and dry coolers.
LU-VE and the Group have introduced new ways of conceiving and constructing products for refrigeration, air conditioning and industrial applications, creating new technologies which have then gone on to become the benchmark for the entire industry.
LU-VE S.p.A.
Codice di commessa N° 43/09 – “Ottimizzazione strutturale di uno
POLITECNICO DI MILANO – DIPARTIMENTO DI
Le prime due frequenze proprie che interessano la struttura sono
rappresentano un incremento rispetto alle frequenza della struttura con losanghe di
rinforzo.
Nelle figure seguenti sono riportate le funzioni di trasferimento delle accelerazioni
verticali della struttura rispetto ad un ingresso di pura accelerazione verticale e rispetto
ad una pura accelerazione di rollio. La accelerazione verticale è misurata
accelerometro di sinistra posto sulla parte
del punto dove era stato posizionato un accelerometro durante le misure sul campo
(capitolo 4, figura 4.3).
Ottimizzazione strutturale di uno scambiatore di calore al fine del trasporto
IPARTIMENTO DI MECCANICA
proprie che interessano la struttura sono
rappresentano un incremento rispetto alle frequenza della struttura con losanghe di
Nelle figure seguenti sono riportate le funzioni di trasferimento delle accelerazioni
struttura rispetto ad un ingresso di pura accelerazione verticale e rispetto
ad una pura accelerazione di rollio. La accelerazione verticale è misurata
accelerometro di sinistra posto sulla parte superiore della struttura
dove era stato posizionato un accelerometro durante le misure sul campo
scambiatore di calore al fine del trasporto”
31
a 5.07 e 6.93 Hz e
rappresentano un incremento rispetto alle frequenza della struttura con losanghe di
Nelle figure seguenti sono riportate le funzioni di trasferimento delle accelerazioni
struttura rispetto ad un ingresso di pura accelerazione verticale e rispetto
ad una pura accelerazione di rollio. La accelerazione verticale è misurata dalla
superiore della struttura, in corrispondenza
dove era stato posizionato un accelerometro durante le misure sul campo
MANUFACTURINGRANGE OVERVIEW THE GROUP
The LU-VE Group name has become the international reference point for all that is best in the design, production and sales of heat exchangers and other components for equipment used in commercial and industrial refrigeration, air conditioning, industrial applications and close control air conditioning.The LU-VE Group of today, with its headquarters in Uboldo (Varese), Italy, has been made possible thanks to a continuous process of cultural and technological innovation starting in 1928 and still continuing strongly now.
The strength of the Group lies in its 10 production facilities and 12 sales companies. LU-VE has been listed on the Italian stock exchange (AIM market) since July 2015.
The important numbers are:· more than 2,500 highly skilled employees· 390,200 m2 of total surface area (160,300 m2 covered)· 2,500 m2 of research and development laboratories· more than 80% of products exported in 100 countries· € 307 million aggregate turnover 2018· 99 production lines.
ITALYPOLAND RUSSIA ITALY INDIA
POLANDINDIA RUSSIA UK - EIREUAESPAINAUSTRALIA AUSTRIA FRANCE GERMANYCHINAITALY USA
ITALY SWEDEN CZECH REP. ITALY ITALY
U.S.A.
Zyklus
CHINA
PRODUCTS
DRY COOLERS
INDUSTRIAL UNIT COOLERS
COMMERCIAL UNIT COOLERS
AIR COOLED CONDENSERS
OEM PRODUCTS
PRODUCT FEATURES• Performance maximisation given by the new high capacity TURBOCOIL® heat exchanger manufactured with internally grooved tubes and TURBOFIN® fins.• Heat exchanger ventilation optimisation.
Ecology and saving• Energy consumption reduction• Noise reduction• Reduction of the internal volume of refrigerant circuit
Space and transport saving• Overall dimension and weight reduction Time saving• Installation and maintenance simplification
Design • High quality in design and rational planning• Maximum reliability of all components• Minimum LCC (Life Cycle Cost).
APPLICATIONS
The production strategy of LU-VE is based on its “Towards Excellence” programme. This concept is an inherent part of the core business of the entire Group, whose products are very closely connected to quality of life: they are used in the refrigeration of food; in air conditioning to reduce temperature and humidity in homes, hospitals, work places and transportation; in the production of energy; in industrial applications, etc.
Commercial and industrial refrigeration• Conservation of fresh food• Conservation of fresh fruit and vegetables• Food processing• Seasoning• Freezing• Warehousing and logistics
Air conditioning for civil and industrial buildingsand close control air conditioning• Shopping centres• Data centres• Industry• Hospitals• Operating theatres• Telecommunications
Applications for industrial processes• Automotive• Chemical and pharmaceutical• Oil refining• Plastics• Energy production• Industry in general
Coils for OEM applications• Refrigerated display cabinets and counters• Dispensers• Ice making machines• Condensing units• Air conditioning• Made to measure solutions for special applications.
The industrial unit coolers are designed for the conservation of fresh or frozen goods and for flash freezing/temperature reduction.The standard ranges are suitable for cold rooms or freezing and the special ranges are for specific refrigeration installation requirements.
AEROEVAPORATORI INDUSTRIALI
INDUSTRIAL UNIT COOLERS
EVAPORATEURS INDUSTRIELS
INDUSTRIE LUFTKÜHLER
EVAPORADORES INDUSTRIALES
ПРОМЫШЛЕННЫЕ
ВОЗДУХООХЛАДИТЕЛИ
PRZEMYSŁOWE CHŁODNICE POWIETRZA
CERTIFY ALL
DX AIR COOLERS
LU-VE S.p.A.
Via Caduti della Liberazione, 53
21040 Uboldo (Va)
Tel: +39 02 96716.1
e-mail: [email protected]
www.luve.it
leadership with passion
CONDENSATORI VENTILATI
AIR COOLED CONDENSERS
CONDENSEURS VENTILÉS
LUFTGEKÜHLTE VERFLÜSSIGER
CONDENSADORES DE TIRO
FORZADO POR AIRE
ВОЗДУШНЫЕ КОНДЕНСАТОРЫ С
ВЕНТИЛЯТОРОМ
SKRAPLACZE FREONOWE
CERTIFY ALL
AIR COOLED CONDENSERS
Code
301
6975
1 10
/12
LU-VE S.p.A.
Via Caduti della Liberazione, 53
21040 Uboldo (Va)
Tel: +39 02 96716.1
e-mail: [email protected]
www.luve.it
leadership with passion
CO
MM
ER
CIA
L A
ND
IN
DU
ST
RIA
L R
EFR
IGE
RA
TIO
NA
IR C
ON
DIT
ION
ING
AN
D I
ND
US
TR
IAL
PR
OC
ES
SE
S
AEROEVAPORATORI COMMERCIALI
COMMERCIAL UNIT COOLERS
EVAPORATEURS COMMERCIALES
COMMERCIAL
HOCHLEISTUNGSLUFTKÜHLER
EVAPORADORES COMERCIALES
КОММЕРЧЕСКИЙ
ВОЗДУХООХЛАДИТЕЛИ
KOMERCYJNE CHŁODNICE POWIETRZA
CERTIFY ALL
DX AIR COOLERS
LU-VE S.p.A.
Via Caduti della Liberazione, 53
21040 Uboldo (Va)
Tel: +39 02 96716.1
e-mail: [email protected]
www.luve.it
leadership with passion
AEROEVAPORATORI COMPATTI PER O.E.M.
COMPACT UNIT COOLERS FOR O.E.M.
EVAPORATEURS VENTILES COMPACTS POUR O.E.M.
KOMPAKT-HOCHLEISTUNGSLUFTKÜHLER FÜR O.E.M.
REFRIGERADORES COMPACTOS PARA O.E.M.
КОМПАКТНЫЕ ВОЗДУХООХЛАДИТЕЛИ ДЛЯ О.Е.М.
KOMPAKTOWE CHŁODNICE POWIETRZA DLA O.E.M.
CONDENSATORI AD ARIA SENZA TUBO PER O.E.M.
TUBELESS AIR COOLED CONDENSERS FOR O.E.M.
CONDENSEURS A AIR SANS TUBES POUR O.E.M.
LUFTGEKÜHLTE ROHRLOSE VERFLÜSSIGER FÜR O.E.M.
CONDENSADORES DE AIRE SIN TUBO PARA O.E.M.
БЕСТРУБНЫЕ КОНДЕНСАТОРЫ ДЛЯ O.E.M.
BEZRURKOWE SKRAPLACZE POWIETRZA DLA O.E.M.
CO
MPA
CT
UN
IT C
OO
LER
S FO
R O
.E.M
. - T
UB
ELES
S A
IR C
OO
LED
CO
ND
ENSE
RS
FOR
O.E
.M.
Code
301
6975
6 06
/13
LU-VE S.p.A.
Via Caduti della Liberazione, 53
21040 Uboldo (Va)
Tel: +39 02 96716.1
e-mail: [email protected]
www.luve.it
leadership with passion
CERTIFY ALL
DRY COOLERS
Code
301
6829
1 02
/13
LU-VE S.p.A.
Via Caduti della Liberazione, 53
21040 Uboldo (Va)
Tel: +39 02 96716.1
e-mail: [email protected]
www.luve.it
leadership with passion
RAFFREDDATORI DI LIQUIDO
DRY COOLERS
AERO-REFRIGERANTS
FLÜSSIGKEITS-RÜCKKÜHLER
ENFRIADORES DE LIQUIDO
СУХИЕ ГРАДИРНИ
SUCHE CHŁODNICE CIECZY
The commercial unit coolers are designed for the conservation of fresh and frozen goods.All ranges are super compact and are suitable for cold rooms or, with low ventilation, for laboratories, work rooms and packing areas.
The air cooled condensers are used in equipment for refrigeration, air conditioning and industrial processes. Axial and centrifugal fan air cooled condensers with single or twin coil (V shape configuration).
The dry coolers are used in industrial processes (to cool water or other fluids) and for air conditioning and refrigeration (water cooling and free cooling). Axial and centrifugal fan dry coolers with single or twin coil (V shape configuration) – Highest capacity and small footprint.
The compact unit coolers are designed for small cold rooms, reach-in cabinets and refrigerated cabinets. The constant high efficiency compact condensers are specially designed for OEMs.These products are not included in the Eurovent certification programme.O
EM
AP
PLI
CA
TIO
NS
• LMC
• SHP
COMMERCIAL UNIT COOLERS
• CDH
8.6 - 125.1 kW
• CHS • LHS
6.7 - 216.3 kW
• FHC
31.5 - 122.4 kW
9.3 - 247.2 kW
• SHV
3.7 - 82.4 kW
• SAV • EAV • XAV • EHV
13.8 - 1,584 kW
• XDHV
49 - 1,000 kW
• XDHL
38 - 810 kW
• EHLD
159 - 1,867 kW
340 - 1,740 W470 - 1,160 W
2.0 - 19.8 kW1.5 - 81.9 kW
• FHC
UNIT COOLERS
• BHS • SHS
700 - 2,290 W
• MMC
• FHD
• SAL • XAL • EHL-EAL
11 - 1,330 kW
Minichannel
• STFT • STN Tubeless steel condensers
• FF
13.6 - 109.4 kW
• EHVD
198 - 2,340 kW
• RAD
65 - 444 kW
• XXLD
347 - 2,333 kW
• STVF...ES BENEFIT® • STVFTubeless steel condensers
470 - 5,460 W 210 - 3,670 W
1.1 - 8.3 kW
• FHA
1.9 - 12.4 kW
• BMA-SMA
• PDF • LS • CS
SPECIAL INDUSTRIAL UNIT COOLERS
• SHF • HF
250 - 570 W
Condotti del fluido refrigerante di formarotonda. Per questi condensatori, su ri-chiesta è possibile fornire un convoglia-tore di plastica modello C.
XxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.
XxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.
XxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.
Condenser tubes of round construction.For this type of condenser, plastic fan sh-rouds type C can be supplied as an extraon request.
Tube du fluide réfrigérant de forme ron-de. Pour ces condenseurs il est possible defournir, sur demande exprèsse du client, undiffuseur en plastique type C.
Runde “Rohrkonstruktion”. Bei diesenKondensator-Typen ist es möglich, aufbesonderen Wunsch einen Kunststoffeinlaufring type C für die Ventilatoren zuliefern.
STN
XxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.
XxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.
XxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.
Condotti del fluido refrigerante di formaovale. Struttura molto compatta per unelevato rapporto potenza/volume. Perquesti condensatori, su richiesta, è pos-sibile fornire un convogliatore di plasticamodello CF.
Condenser tubes of oval construction.Very compact construction for maximumcapacity/volume ratio. For this type ofcondenser, plastic fan shrouds type CFcan be supplied as an extra on request.
Tube du fluide réfrigérant de forme ova-le. Structure très compacte avec un rap-port élevé puissance/volume. Pour cescondenseurs il est possible de fournir, surdemande exprèsse du client, un diffuseuren plastique type CF.
Ovale “Rohrkonstruktion”. Sehr kompak-te Ausführung max. Verhältnis Lei-stung/Abmessungen. Bei diesen Konden-sator- Typen ist es möglich, auf beson-deren Wunsh einen Kunststoff einlaufringtype CF für die Ventilatoren zu liefern.
STFT
AIR COOLED CONDENSERS
• Emeritus
NEW COMBINED SPRAY + ADIABATIC SYSTEM
LU-VE TECHNOLOGY
CO2 Unit coolers and gas coolers for CO2.
EMERITUS® EMERITUS® is the most advanced SPRAY® solution to improve performance and minimize dimensions of large-capacity aircooled condensers, gas coolers and dry coolers.
EMERITUS® brings together the benefits of spray systems and adiabatic pre-cooling.
A sophisticated control system maximizes the effects of these combined systems.
GLYCOL Industrial air coolers for glycol water.
SAFESHELL Casing manufactured from “Safeshell” shock resistant safety material.
JET-O-MATIC® JET-O-MATIC®: maximum unit cooler capacity at every condition of heat load (CT), room temperatura (TC), temperature difference (ΔT) and refrigerant type (R), specially with the new refrigerants characterized by a mixture with high gas/liquid ratio after the expansion valve.
JETSTREAMER® The special profile of JETSTREAMER® grille combines innovative design with a notable increase in air throw and air quantity, especialy with frost on the fins.
MINICHANNEL® MINICHANNEL® has been designed forTube Ø 5mm reducing refrigerant charge and energy
consumption, combined with high operating pressures.
Heat exchanger with special configuration of fins with “louvre” cuts which are positioned very closely together, capable of optimizing and increasing heat transfer performance, thanks also to the use of special high-efficiency tubes with internal grooves.
NIDEA New Intelligent DEfrosting Apparatus: Nidea optimizes all the dynamics of the electrical defrost process of unit coolers and avoid wasting energy and money, without reducing the functionality of the equipment.
NH3 Industrial unit coolers for ammonia (NH3) with very low refrigerant charge.
STEEL Galvanized steel casing with corrosion-PROTECTED resistant Epoxy-Polyester powder coating.
SAFETUBES The LU-VE patented coil suspension SYSTEM® SAFETUBES SYSTEM® completely eliminates
contact between tube and condenser or dry cooler structure, providing full protection for the coil tubes during transport, installation and operation.
SMART® The patented SMART® structure, exhaustively tested on vibrating platforms, provides many advantages such as greater product rigidity, reduced unit weight, better and more uniform air circulation and minimum performance loss if one motor should stop.
WHISPERER The new compact silencer, designed andPLUS tested in the LU-VE laboratories, dramatically
reduces sound pressure level up to 6 dB(A).
In 2000, LU-VE S.p.A. was the first company in Europe to achieve the prestigious Eurovent “Certify All” certification for the entire range of its products. The voluntary Eurovent certification (which guarantees capacity, air quantity, energy consumption, sound pressure levels and construction characteristics) covers all products which make up the range. It is only issued if test results confirm the values stated in the catalogue.
LU-VE S.p.A. holds certification based on various standards and conformity requirements such as:
• UNI EN ISO 50001:2011 “Energy Management Systems”• UNI EN ISO 14001:2015 “Environmental Management
Systems”• UNI EN ISO 9001:2015 “Certified Quality System”• Russian GOST Certification• “QS” Certification (Industrial production of heat exchangers
for refrigeration in the Peoples Republic of China)• ASME Certification (only for special ASME units).• Eurovent Certification Nr. 00.10.214
European Directives• 2006/42/CE Machinery Directive • 2014/68/UE Pressure Equipment Directive (PED)• 2014/35/UE Low Voltage Directive (LVD)• 2014/30/UE Electromagnetic Compatibility (EMC)
CERTIFY ALLDRY COOLERS AIR COOLED CONDENSERS DX AIR COOLERS
LU-VE was the first company to obtain the new important European EUROVENT certification “CERTIFY-ALL” for all ranges of unit coolers, air cooled condensers and dry coolers.
UNI EN ISO9001:2015
CERTIFIEDQUALITYSYSTEM
UNI CEI EN 50001:2011
ENERGYMANAGEMENTSYSTEM
UNI EN ISO9001:2015
CERTIFIEDQUALITYSYSTEM
UNI CEI EN 50001:2011
ENERGYMANAGEMENTSYSTEM
The LU-VE Energy Management System is in compliance with UNI CEI EN 50001:2011.
LU-VE is certified to UNI EN ISO 9001:2015,which is the most important Quality Assurance Qualification.
CERTIFICATIONS
The LU-VE Environmental Certification System is in compliance with UNI ISO EN 14001:2015.
UNI ISO EN 14001:2015
ENVIRONMENTALCERTIFICATIONSYSTEM
MANUFACTURINGRANGE OVERVIEW
www.luvegroup.com
leadership with passion
3019
3516
– 0
3-20
19