28
Marantec Gate Operators Journal
Marantec Gate Operators Journal
Operator systems for hinged gates
Operator systems for sliding gates
Operator systems for parc barriers
Uniform EOS programming structure
Extensive accessories
Safe and risk-free
6
14
20
22
24
26
Content
2
3
We are pleased at your interest in the Marantec range of gate operators. In this brochure, we look forward to pre-senting our comprehensive range of gate operators. We can supply the right operator for every gate: single wing and double wing hinged gates, sliding gates and entries to car parks. We supply a wide range of accessories for your convenience and safety: With just one control con-cept – universal and yet customised. We are advancing forward. Move ahead with us.
4
Gate operatorsre-designed
Gate operators
Swing, slide, conceal: Marantec gate operators are the driving force behind anything that needs to be moved. Safe and convenient. No matter what the weather, and with great attention to detail. Attractive and stylish on the outside, with the latest DC technology on the inside.
5
Mechanical adjustment of the end positions: The open and closed positions can be optimally adjusted thanks to the
high-precision sensors.
Electronic hall sensors as limit switches: They guarantee precise
determination of the operator position and so also the gate.
Emergency release: This is conveniently accessible and can be activated without extra tools. Release from the outside with optional
accessories possible.
Piston rod principle: It ensures exceptionally effective transmission of power and extremely quiet operation.
The perfect operator for lightweight single wing or doub-le wing hinged gate systems. Special features: Electronicend position processing through the latest hall sensor technology, piston rod principle, two-wire cables, battery backup capability.
Small but powerfulComfort 515, 515L
6
Gate operators – H inged gate operators
Emergency release: This is conveniently accessible and can be activated without
extra tools. Release from the outside with optional accessories possible.
Control x.52: the standardised EOS control with a high-quality LC display.
Marantec reference point technology: guarantees highprecision processing of
the end positions while at the same time protecting the mechanical components.
Piston rod principle: It ensures exceptionally effective transmission of power and extremely quiet operation.
7
Comfort 516, 516L
The alternative: different concept, identical result. Special features: reference point technology, piston rod principle four-wire cables. Extremely quiet operation, easy-to-use release mechanism, battery backup capability.
Power transmission: The exceptionally sturdily-built components guarantee extremely good power transmission.
Marantec reference point technology: guarantees highprecision processing of
the end positions while at the same time protecting the mechanical components.
Command 108 external hand-held programming device: enables operators to be programmed 1:1 with the greatest
convenience.
Piston rod principle: It ensures exceptionally effective transmission of power and extremely quiet operation.
The perfect operator for heavy single wing or double wing hinged gate systems. Special features: high power transmission up to 3,000 N, reference point technology, piston rod principle, four-wire cables. Aluminium diecast housing, battery backup capability.
Large, powerful and smart Comfort 525, 525L
8
Gate operators – H inged gate operators
Trolley principle: The trolley incorporated in the housing takes care of power transmission
and makes for an ultra-sleek operator.
Marantec reference point technology: guarantees highprecision processing of
the end positions while at the same time protecting the mechanical components.
Emergency release: extremely light and, above all, easy to access; the Allen
key required for this purpose is kept in the operator housing and is invisible
from the outside.
Control x.52: the standardised EOS control with a high-quality LC display.
9
Comfort 530L
Same performance values, different design based on the trolley principle. Insensitive to dirt. Special features: high power transmission up to 3,000 N, reference point tech-nology, four-wire cables. Aluminium diecast housing, battery backup capability.
Emergency release: straightforward to operate thanks to an easy-to-reach Allen key.
Wall-mounting: can be pre-assembled, making it extremely easy to fi x the
operator to the pillar.
Control x.52 EOS control: perfectly positioned in the operator
housing and so particularly easy to access and operate.
Integrated LED lighting: diffused ambience lighting which at the
same time indicates that the gate is moving.
* available in Spring 2014
For XXL gateposts: A hinged bracket with an integra-ted and easy-to-access control with a built-in LED po-sition light. Durable components, attractively housed. Battery backup capability.
10
New hinged gate operatorsComfort 560*
Gate operators – H inged gate operators
Particularly waterproof: The mechanical and electronic operator systems are
insulated with a special seal.
Marantec reference point technology: guarantees highprecision processing of
the end positions while at the same time protecting the mechanical components.
Two underground operators which speak for themsel-ves. Sensitive force limitation with DC technology. Gear lubrication with grease or oil bath fl uid. Durable and robust materials. Battery backup capability.
Can be fi tted on either side: fl exible right-hand or left-hand installation with only one version, for reduced inventory holding.
Release mechanism: allows the operator to be released if the worst comes to the worst, and for maintenance purposes.
11
Comfort 585, 586
** depending on installation situation/gate-specifi c** depending on gate width, weight given is for gate wing measuring 1 metre in width
Comfort 515 (L
)
Comfort 516 (L
)
Comfort 525 (L
)
Comfort 530L
Comfort 560
Comfort 585
Comfort 586
Push and pull force (max. N) 1,000 1,000 3,000 3,000
Torque (max. Nm) 120 250 300
Wing height (max. mm)2,000 2,000 2,000 2,000 2,000
Opening time (sec.)*15 –25 15 –25 15 –25 15 –25 10 – 20 15 15
Wing width (max. mm)2,500 (3,500) 2,500 (3,500) 3,000 (4,000) 3,500 2,500 2,000 3,000
Rated power/standby (W) < 4 < 4 < 4 < 4 < 4 < 4 < 4
Gate weight (max. kg)200 200 400 350 250**
Emergency power (battery backup) (optional)
250** 600**
Opening angle (max. °)* (larger opening angles available on request) 120 120 115 115 120 110 110
Motor voltage 24 V DC 24 V DC 24 V DC 24 V DC 24 V DC 24 V DC 24 V DC
12
Technology at a glance
Techn ica l data – H inged gate operators
Electric lock for hinged gates: Stabilises the gate in the closed gate position; recommended for gate widths > 2,500 mm.
Command 108 external hand-held programming device: Enables all operators to be programmed 1:1 with the greatest convenience.
Emergency release: Extremely light and, above all, easy to access; the Allen key required for this purpose is kept in the operator housing and is invisible from the outside.
Control x.52 control unit: Perfectly and fl exibly adjustable to suit every gate system.
13
Integrated control unit: The control is integrated in the extremely compact design and so is ideally protected from
all kinds of weather.
Pre-assembled spur gear: The fully pre-assembled operator component can be
inserted in next to no time.
Height-adjustable spur gear: With a maximum of 160 mm, this can be easily
adjusted to fi t the toothed rack on every gate.
Variable column heights: Two standard column heights to choose from – 1,250 mm and 1,500 mm. Special lengths possible up
to a maximum of 2,000 mm.
Two powerful column operators which can be easily and unobtrusively integrated in fencing thanks to their slim aluminium housing. Special features: height-adjustable gear wheel, various column heights, battery backup capability.
14
Strong and integratableComfort 850, 851
Gate operators – S l id ing gate operators
Integrated control unit: The control is integrated in the extremely compact
design and so is ideally protected from all kinds of weather.
Emergency release: Concealed in the operator housing, it couldn‘t be easier to operate using the socket key provided.
Pre-assembled spur gear: The fully pre-assembled operator component can be
inserted in next to no time.
Height-adjustable spur gear: With a maximum of 20 mm, this can be easily ad-justed to fi t the toothed rack on every gate.
Identical concept but more compact: High performance with the smallest footprint. Durable and stylish alu-minium housing, height-adjustable spur gear, battery backup capability.
15
Comfort 850S, 851S
Pre-assembled spur gear: The fully pre-assembled operator component can be
inserted in next to no time.
Control x.82 EOS control: Perfectly positioned in the operator housing and so
particularly easy to access and operate.
Diecast aluminium fl oor panel: The best materials for a long life.
* available in Spring 2014
Programming: Operators can be program-med on the control unit itself or using the external programming device. Operation is
identical in each case.
Compact DC operators with an integrated easy-access control unit. Special features: solid, durable platform, stylish housing, extremely quiet operation, battery back-up capability.
For sliding with DC or ACComfort 880, 881*
16
Gate operators – S l id ing gate operators
Integrated control unit: Extremely easy to programme using the high-quality LC
display; the main switch is also integrated.
Release: Easy to operate, even from the outside when additional accessories are used.
Pre-assembled spur gear: The fully pre-assembled operator component can be
inserted in next to no time.
Motor bearing: The spring buffer guarantees maximum durability of the gear.
* available in Spring 2014
17
Dynamic 745*, 750 FU*
Robust AC technology for large-size solid gates. Alterna-tively with modern frequency converter technology for precise normal and soft run speeds, adjustable for each direction. Uniform programming for AC and DC operators.
Comfort 850 (S
)
Comfort 851 (S
)
Comfort 880
Dynam
ic 745
Comfort 881
Push and pull force (max. N) 400 800 400 800
Torque (max. Nm) 75 125
Dynam
ic 750
FU
Gate weight (max. kg)400** 800** 400** 1,300800** 1,800
Wing width (max. mm)8,000
24 V DC
8,000
24 V DC
8,000
24 V DC
17,000
400 V AC
8,000
24 V DC
17.,000
230 V AC FC technology
Travel speed (max. mm/sec.)180 180 220 98220 98/210*
Emergency power (battery backup) (optional)
Motor voltage
Rated power/standby (W) < 4 < 4< 4 < 4 < 4 < 4
** AC motor at 50 Hz / approx. 100 Hz** For gates weighing up to the maximum weights specifi ed, there is no need for an active closing edge safety device for the main and secondary closing edges
18
Power from within
Techn ica l data – S l id ing gate operators
Comfort 850S sliding gate operator: The younger brother of Comfort 850 column operator in a sturdy compact aluminium housing.
Control 950 LED signal light: Energy-saving and yet extremely bright light to indicate gate movement.
Closing edge safety device: A passive or active closing edge safety device is used to safeguard crushing and shearing zones, and to protect from
injury and damage to property.
Command 108 external hand-held programming device: Enables all operators to be programmed 1:1 with the greatest convenience. Plug in, programme,
unplug it, take it with you.
19
Opening times of approx. 5 – 10 sec., speed version approx. 3 sec.;
maximum of 1,000 movement cycles per day, depending on the barrier arm length
Oval arm profi le 77 x 48 mm
Stainless steel housing: Particularly robust and extremely high quality; available
as an optional feature.
Integrated control unit: The control is integrated safely in the housing and is
well-protected.
Fold-out control unit: The pull-out design makes it perfect to reach for easy operation.
Articulated arm: The version designed for restricted overhead clearance < 2,180 mm;
available as an optional feature for the speed version.
max. 2,000 mm max. 4,000 mm
max. 4,000 mm max. 8,000 mm
Marantec direct-current technology for outstanding safety and ease of use: fold-out control unit, easily accessible fi re department unlock in an emergency, speed function, LED lighting, extensive accessories.
20
Flexible and practicalParc 200
Parc
Oval arm profi le 95 x 52 mm
Durability: The use of particularly robust components and a reinforced gearbox
guarantees a long service life.
Access to the technology: The Parc barrier arm housing can be fully removed;
this allows free access to the operator and control components.
Exchangeable spring assembly: Easy access means that wear and tear parts can
be replaced at any time.
Added protection against vandalism: Electromagnetic locks with stainless steel support posts provide the best possible
protection.
Same basic features, more powerful components for enhanced performance: reinforced gearbox, interchan-geable springs. Innovative BUS technology to easily and fl exibly expand functions using modules. Position accuracy through reference point technology.
fl exible installation
max. 6,000 mm max. 12,000 mm
Opening times of approx. 8 - 15 sec.; max. 1,000 movement cycles per day, depending on the barrier arm length
21
Parc 300
Operator programming with EOS
22
Programming operators intuitively! Feel what needs to be done and let intuition be your guide. See the result, without words, yet very obvious. One for all.
EOS
23
Installation and monitoring: Operator systems and accessory components are particularly easy to install and are actively monitored.
EOS control: The standardised control for all Marantec operator systems can be operated from control unit itself or, alternatively, from the fl exible Command 108 hand-held
programming device with its enhanced comfort features.
Marantec MSBus BUS system: Extension modules can be retrofi tted at any time thanks to the standardised uniform interface; the accompanying housings are designed to allow
individual modules to be simply plugged in.
Informative fault log: The last 16 messages can be read off at any time on the LC display.
Command 108 hand-held programming device. For extra convenience in your day-to-day work. Like the operator systems, it has a LC display and +/- and P operating buttons. An additional BUS plug and a three-metre long connecting cable are further features. It can be used to comfortably programme all operator systems: Just plug in, program-me and then unplug. No longer necessary to stand on ladders or go down on hands or knees to programme operators.
Digital 179 antenna. This antenna receives signals from the hand transmitter and passes them on to the control. The range of use can be improved by connecting this external magnetic base antenna.
EP 141 extension board. For connecting Marantec control elements with system cables, for all hinged gate and sliding gate operators for private use.
Protect-Contact 700, 800. This safety edge system for safeguarding closing edges consists of 26 mm and 53 mm profi le height contact strips which you can cut to the exact size yourself and easily fi t as continuous or end strips at the place of use.
1
Extensive accessoriesfor safety and convenience
24
Extens ive accessor ies
2
3
4
1
2
3
4
Special 633 photocell. One-way photocell allowing up to 180° fl exibility in its horizontal alignment; this accessory is necessary if you
wish to use the automatic closing facility. Protective cover set: Extra protection that can be retrofi tted for the Special 633 photocell.
Control 950 signal light. For maximum attention. If the gate is in motion, it fl ashes or changes to a continuous
light using energy-effi cient LED technology. As with all safety components, the Control 950 is also a Marantec development and therefore offers a perfect comple-ment to the existing range.
Special 402, 403 electric lock. This locks the gate in the closed gate position and there-fore provides extra safety against unauthorised opening of the gate.
Special 525,530: Gate and pillar hinge fi ttings for gradients. In combination with Comfort 525 and Comfort 530 operator models, the hinge fi tting sets enable them to work perfectly at gradients of up to 10%. The fi ttings stand out due to their sturdy design and build, and are particularly easy to install.
Battery backup. In the event of a power cut, the battery backup takes over opening and closing
the gate, depending on the length of use and number of opening and closing cycles. It can be retrofi tted as
an accessory at any time.
Control 403 induction loop detector. When the buried induction loop is driven over, an impulse is sent to
the operator system. Special advantages of the Control 403 induc-tion loop detector are the integrated measuring instrument and the
integrated LC display for easy programming and simulation.
25
5
6
10
9
8
7
5
6
7
8
9
10
Our service and safety promise
We would be pleased to assist you with any
general queries about gate automation or
with any other technical queries you may
have. Feel free to contact us.
Marantec Service Hotline
Technical Support:
+49 52 47 705-221*
Marantec Customer Service
Internal Sales:
+49 52 47 705-0*
· Active support for safe and comprehensive
automation of complex gate systems.
· Combination testing according to current and
statutory directives: Marantec operator systems
can be used for many gates and gate types.
Each Marantec operator is tested in our own
test centre and also certifi ed by recognised
independent institutes. It goes without saying
that Marantec gate operators meet the
requirements of the DIN EN 13241-1
European standard.
· Range of high-performance accessories
for enhanced safety.
· Competent, customer-orientated service.
· Effective practical training courses on safety-related
subjects and new products.
· Safety tested. Made in Germany. Made by
Marantec. Marantec gate operators verifi ably
meet all statutory standards and in addition
provide innovative and patented safety features.
Our company is certifi ed according to
DIN EN ISO 9001 and DIN EN ISO 14001.
** Monday to Thursday from 8 am to 5 pm and Friday from 8 am to 2 pm
Safe and r i sk - f ree
26
Find out more about the services
we offer as well as our detailed
warranty conditions by visiting
the dealer login area on our website
at www.marantec.com
Not yet registered for our login area?
It couldn‘t be easier - just fi ll in the form at
http://www.marantec.com/de-en/
registrieren.html. You will then receive an
email from us with your login details.
You are then a registered dealer and will be
able to use all the features and information
in our dealer forum.
Our warranty promise
In private use* a two-year warranty applies in
principle (24 months): from the 1st to the 12th
month on materials and services, from 13th to the
24th month on materials only. For our Comfort
products 260, 270, 280, 360, 370, 380, 515, 516,
525, 530, 560, 585, 586, 850 (S), 851 (S), 880,
881 we provide a five-year warranty.
A one-year warranty (12 months) applies in
principle for commercial and industrial use:
12 months on materials and services.
A six-month warranty applies for all spare parts as
well as parts replaced during servicing and repairs.
The warranty does not extend to wear and tear
parts or batteries, light bulbs and fuses.
** Private use is understood to be not more than 10 opening and closing cycles per day
Note: Warranty claims are governed in principle by
statutory provisions and require verification.
27
Operator systems for garage doors
Operator systems for hinged gates
Operator systems for sliding gates
Operator systems for industrial doors
Operator systems for parc barriers
Assessories
Product service
2-E
N46
8-DI
G-2
-101
3 |
We
rese
rve
the
right
of t
echn
ical m
odifi
catio
ns. |
Des
ign:
kop
fsta
nd-w
eb.d
e
www.marantec.com
Marantec Antriebs- und Steuerungstechnik GmbH & Co. KGRemser Brook 11 · 33428 Marienfeld · Germany + 49 5247.705-0 · + 49 5247.705-284
