Date post: | 07-Mar-2016 |
Category: |
Documents |
Upload: | the-marineshaft-group |
View: | 219 times |
Download: | 5 times |
New 1700 m2 workshop
Moving through time …
Vessel M/V Stena Poseidon 1/2 Job Straightening of propeller shaft Class Det Norske Veritas
Vessel M/V Richard With 1/3 Job Straightening of propeller shaft Class Det Norske Veritas
Vessel M/V Richard With 3/3 Job Mobile machining of intermediate shaft coupling end Class Det Norske Veritas
Vessel M/V Doris Job Repair of rudder stock Class Det Norske Veritas
Vessel M/V Tali 1/3 Job Straightening of propeller shaft Repair of rudder and rudder stock Class Lloyd’s Register of Shipping
Vessel M/V Panamax Sun Job Straightening of rudder stock Ø990 x 8890 mm Class China Classification Society
Vessel M/V Baltrum IV Job Straightening of impeller shaft Class Germanischer Lloyd
Large stock of class approved steel (incl. 3.2 LRS certificate) Round bars in S355J2+N – diameter up to 1,000 mm, length up to 14,000 mm Plates in S355J2+N – up to 150 mm Stainless steel round bars in 1.4404 / 316L – diameter up to 260 mm , length up to 15,000 mm Liners in stainless steel and bronze
Vessel M/V New Endurance Job Manufacturing of rudder stock Class Bureau Veritas
Vessel M/V London Night Job Manufacturing of rudder stock Class Germanischer Lloyd
Propeller shafts in S355J2+N incl. 3.2 LRS certificate in stock
Vessel M/V Heather Sea Job Manufacturing of propeller shaft Ø650/343 x 8,760 mm Class Det Norske Veritas
Vessel M/V MSC Malin Job Welding of rudder stock Class Bureau Veritas
Heat treatment
Vessel M/V Strazak 25 Job Micro welding of propeller shaft Class Det Norske Veritas
Vessel M/V Island Patriot Job Micro welding of thruster shaft Class Det Norske Veritas
Coating of shafts
Vessel M/V Yara Gas Job Manufacturing of rudder and repair of rudder stock Class Det Norske Veritas
Vessel M/V Raven Arrow 1/2 Job Repair of rudder arrangement Class Det Norske Veritas
Vessel M/V Raven Arrow 2/2 Job Repair of rudder arrangement Class Det Norske Veritas
Vessel M/V Seaboard Star 1/3 Job Repair of rudder arrangement Class Lloyd’s Register of Shipping
Vessel M/V Seaboard Star 3/3 Job Repair of rudder arrangement Class Lloyd’s Register of Shipping
Vessel M/V Vergina 1/3 Job Repair of rudder stock Class Det Norske Veritas
Vessel M/V Vergina 2/3 Job Repair of rudder stock Class Det Norske Veritas
Vessel M/V Veritas H Job Reconditioning of propeller equipment
Vessel M/V Acacia 1/2 Job Complete renovation of propeller equipment Class Det Norske Veritas
Vessel M/V Acacia 2/2 Job Complete renovation of propeller equipment Class Det Norske Veritas
Vessel M/V Stena Danica Job Repair of propeller blades Class Det Norske Veritas
Vessel M/V Don Pasquale Job Renewal of white metal in FWD and AFT stern tube bearing Class Lloyd’s Register of Shipping
Vessel ACL vessels Job Repair of fixed propellers on-site Class Lloyd’s Register of Shipping
Vessel ACL vessels Job Mobile machining of propeller boss Class Lloyd’s Register of Shipping
Vessel New building L213 Job Mobile machining and polishing of intermediate shaft Class American Bureau of Shipping
Vessel M/V Tor Minerva Job Mobile machining of propeller shaft Class Det Norske Veritas
Vessel M/V Sophia D Job Manufacturing of rudder stock, rudder cone insert, pintle and Thordon bushings Fitting and mounting of parts with rudder on-site Boring of upper bearing, boring of horn and boring of rudder for new cone insert Class Det Norske Veritas
Mobile machining world-wide
MarineShaft Hirtshals A/S Pier 2 DK-9850 Hirtshals Tel. +45 96 56 02 02 Fax +45 96 56 02 03 [email protected] www.marineshaft.com
Call +45 96 56 02 02
or
E-mail [email protected]
We can take a decision from your description and quote within the hour.
… move on!
About MarineService
MarineService Hirtshals A/S carries out a wide
range of repair jobs for the marine industry.
The work is carried out in our workshop in Hirtshals or on vessels world wide . We have access to slipways as well as docking facilities.
• Engines
• Gearboxes
• Steering engines
• Laser measuring
• Mobile machining
• Steel and welding
• Hydraulics and pumps
• Cranes and winches
• Propeller equipment
• Pipes
• Pumps
• Foundation
• Electrical equipment
• Stainless steel
We are specialised in:
All-inclusive contract
MarineService’s all-inclusive contracts cover repair, renovation
and upgrading tasks. We cooperate with professional and experienced sub-contractors and we guarantee that the contract is fulfilled in compliance with our high demands to quality.
This means that our customers have only one point of contact:
MarineService Hirtshals A/S
Engines
MarineService carries out all types of engine work, including
repair, maintenance, replacement, and installation of engines. MarineService performs renovation tasks on vessels in operation.
Renovation of engine parts
MarineService carries out renovation/machining of engine parts
e.g. repair of cylinder heads, piston rods, cylinder linings, turbochargers, radiators, regulators, thermostats, pumps and valves
Gearboxes
MarineService carries out work on all types of gearboxes
including ordinary maintenance, straightening, foundation and class inspections.
Electrical equipment
MarineService offers maintenance, trouble shooting, and
replacement of electrical equipment including repair of electric engines.
MarineService offers you a complete service check of your engine.
Vessel M/V Margret Engine W18V32 Job 24000 hrs. major overhaul
Vessel M/V Margret Engine W18V32 Job In the workshop
Steering gear
MarineService can repair all types of steering gear, including
dismounting, disconnection, machining, and mounting.
Laser alignment
MarineService has specially developed laser equipment which enables measurement of shaft lines, alignment of diesel engines, gear, pumps, rudder, etc. The measurement is documented by printouts.
Mobile machining
MarineService has a wide range of special equipment. Often mobile milling equipment is manufactured specifically for the individual job.
MarineService has developed and manufactured mobile boring and machining equipment for the boring of stern tubes, rudder neck bearings, rudder horn, etc as well as on-site machining of shafts worldwide. Furthermore, we carry out levelling/milling of foundations and flat surfaces.
Mobile machining - Boring of stern tubes, rudder neck bearings, etc. - Machining on-site of complete propeller equipment. - Laser alignment - Shaft withdrawal
Steel and welding
MarineService has certified welders who are specially trained and can
work with all types of steel and stainless steel.
MarineService has welding experience with TIG, MIG, MAG as well as electrode welding. Steel constructions and mounting of exhaust systems on diesel engines are only a few of some of the welding jobs we have carried out.
Stainless steel
• • Expansion of existing facilities, food industry etc.
• All types of service and maintenance tasks • New manufacture of transport equipment • New manufacture of specialty products • Other steel tasks
Hydraulics and pumps
MarineService carries out all types of hydraulic work, including
manufacturing of hydraulic hoses, new installation and error detection as well as repair of existing hydraulic systems.
Cranes and winches
MarineService offers overhaul of cranes and winches. We rebuild all types of winches such as trawl winches, wire winches and anchor winches.
MarineService carries out work world-wide and our well-skilled staff are always ready to come.
Propeller equipment MarineService dismounts, disconnects, renovates and mounts
propeller equipment, rudder stocks and steering gear of all types. Marineshaft offers straightening of shafts, manufacture and repair of blades. Read more at www.marineshaft.com
Pipe work
MarineService carries out all types of work on pipes including steel, aluminium, stainless, steam pipes, conifer, hydraulics, plastic pipes, etc.
Pumps
MarineService carries out maintenance on all pump types. Our services
include dismounting, disconnecting, renovation and mounting.
Foundation
MarineService carries out all types of alignment and casting of
foundation of engines, gearboxes, stern tubes, front gear, steering gear, winches, drums, and various other foundations for milling machines, lathes, etc.
Special tasks
Service contracts
MarineService offers you attractive service contracts.
Preventive service
MarineService offers service checks of engines. Data is gathered,
treated and evaluated in a comprehensive report. This report gives
tangible information on the condition of the engine and makes the
basis for the next service check.
Sale of spare parts
MarineService offers spare parts for all engine types.
Preventive service!
Preventive service!
Contact us
MarineService Hirtshals A/S Pier 2, DK-9850 Hirtshals
Denmark Phone +45 96 56 03 03
[email protected] www.marineservice.com
In 2009
MarinePipes Hirtshals A/S
was established after the activities of
Rødby VVS had been acquired.
MarinePipes has specialised in chemical cleaning of pipes in vacuum toilet systems and high-pressure flushing of discharge
pipes.
The work is carried out on board vessels world wide.
Our method is a competitive alternative to replacing limescaled pipes which can be expensive and time-consuming.
We work even while the vessels are in operation.
Our highly skilled employees are ready to rush and flush –
anywhere and anytime.
Save time – save money
We clean the pipes efficiently and without harming neither water environment nor the pipes or the sealings.
Our well-proven method of cleaning removes limescale and urinescale from the pipes.
The whole process is strictly supervised.
We guarantee
The result speaks for itself
Before and after chemical cleaning of a pipe
Maersk Supply Service
Color Line A/S
Scandlines GmbH
Polar Seafood A/S
Hurtigruten ASA
Eimskip
Bornholmstrafikken A/S
Ærø Ferries A/S
Admiral Danish Fleet
Repair yards
Selected references:
MarinePipes Hirtshals A/S is a member of the MarineShaft Group, which also includes MarineShaft Hirtshals A/S
and MarineService Hirtshals A/S
Contact us
MarinePipes Hirtshals A/S
Pier 2, 9850 Hirtshals Denmark
Tel. +45 96 56 01 10 [email protected] www.marinepipes.com