Markar 2014 Canadian Price List - Ceco Door Books/2014 Price Books... · Hinge Finishes ... Markar...

Markar 2014 Canadian Price List

© 2014 Pemko Manufacturing Co.Prices Effective February 1, 2014

2Prices Effective February 1, 2014

Copyright © 2014, Pemko Manufacturing Co., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

Warranties ....................................................................................................................................................................................................................3Terms and Conditions......................................................................................................................................................................................... 4-5Hinge Finishes ......................................................................................................................................................................................................... 6-7Hinge Numbering System and Standard Lengths .................................................................................................................................. 8-9Continuous Hinge Modifications .....................................................................................................................................................................10Continuous Hinge and Edge Guard Modifications ..................................................................................................................................113500 Series Stainless Steel Pin and Barrel Security Hinges .......................................................................................................................12300 Series Stainless Steel Pin and Barrel Hinges ................................................................................................................................... 13-17200 Series Carbon Steel Pin and Barrel Hinges .......................................................................................................................................18100 Series Aluminum Pin and Barrel Continuous Hinges .................................................................................................................. 19-20Toilet Partition Hinges ..........................................................................................................................................................................................21Continuous Hinge Shims .....................................................................................................................................................................................22Pivot Reinforcing Hinges ......................................................................................................................................................................................23Surface Hinge Leaf Parts .....................................................................................................................................................................................23 Tools and Accessories ...........................................................................................................................................................................................24Screw Pack Pricing ..................................................................................................................................................................................................25Fastener Pricing ................................................................................................................................................................................................. 26-27Flat Astragals ...............................................................................................................................................................................................................28Edge Guards Order Form ...................................................................................................................................................................................29Current Transfer Prep Information Form .....................................................................................................................................................30


3Copyright © 2014, Pemko Manufacturing Co., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

Markar General Warranty

liMited Warranty Markar Architectural Products guarantees its products to be free

from defects in materials and workmanship for a period as stated

for each product line. Our liability, expressed or implied, shall be

limited to replacement of goods proven defective. No claims will be

allowed for damages incurred or work done thereon.

The limited warranty specifically excludes damage arising from

abuse, misuse, modification, incorrect installation or adjustment,

deterioration of finish due to improper handling or improper

placement or protection of product prior to or after installation in

excess of normal weathering or usage, and all other circumstances

beyond the control of Markar Architectural Products.

This limited warranty is in lieu of all other warranties expressed or

implied, and excludes any warranty of fitness or merchantability.

No agent, representative dealer or employee of Markar

Architectural Products has the authority to increase or alter the

terms and conditions of this limited warranty.

Continuous HinGe and Pivot liMited Warranty

Markar Architectural Products guarantees its products to be free

from defects in materials and workmanship for a period of 10 years.

Hinges with medical bearings are guaranteed for 25 years.

edGe Guard and astraGal liMited Warranty

Markar Architectural Products guarantees its products to be free

from defects in materials and workmanship for a period of 1 year.

eleCtriCal ModifiCation liMited Warranty

Markar Architectural Products guarantees its electrical modification

performance to be free from defects in materials and workmanship

for a period of 5 years.

wa

rr

an

ties



TERMS AND CONDITIONS

ASSA ABLOY Door Security Solutions Canada, a division of ASSA ABLOY Canada Ltd. and all of its current and future associated companies, subsidiaries and operating brands (hence forth referred to as ASSA ABLOY Door Security Solutions Canada) reserve the right to decline an order, in whole or in part, when the type or quantity of goods or credit worthiness of the Purchaser is not satisfactory to us in our sole and absolute discretion. The terms and conditions contained herein constitute the entire agreement between the parties. Purchase Orders, Quotations (“Quote”) requests, Acknowledgements or the like issued by the Purchaser that have contrary standard terms and conditions are not binding on ASSA ABLOY Door Security Solutions Canada, unless such terms and conditions are approved in a separate written agreement by ASSA ABLOY Door Security Solutions Canada’s authorized representatives. In the event of an acceptance of Purchaser’s Purchase Order by ASSA ABLOY DSS Canada, the Purchaser agrees that such acceptance is solely conditioned on Purchaser’s acceptance of the terms and conditions set forth in this instrument, regardless of the terms and conditions spec- ified in the Purchaser’s Purchase order. The terms and conditions in Purchaser’s Purchase Order which conflict with terms and conditions of this instrument shall be disregarded and are hereby rejected, and this instrument shall constitute the entire agreement between ASSA ABLOY DSS Canada and the Purchaser. In the event that ASSA ABLOY Door Security Solutions Canada does not enforce or require strict performance of any term or condition hereof, or of any other document, instrument or other agreement relating to goods sold, such lack of enforcement or requirement of strict performance will not waive, affect or diminish any right of ASSA ABLOY Door Security Solutions Canada to enforce or require strict performance of such term or condition in the future.

Prices:All prices are subject to change without notice and are not guaranteed. All shipments will be made at prices in effect at the time of order acceptance. Possession of this price list does not constitute an agreement to sell. Acknowledgements, invoices and quotations are on an “Errors and Omissions Excepted” basis (commonly referred to as E.O.E.). We reserve the right to correct clerical, stenographic and other obvious errors at any time.

Terms:2% tenth of the month following, net thirty (30) days after statement date. It is understood that ASSA ABLOY DSS Canada may impose and charge a finance charge of 2% per month or the highest rate allowed by law on any amount which becomes past due and delinquent. Additionally, the Customer shall be responsible for all collection costs, court costs and reasonable attorney’s fees in connection with the recovery of any delinquent amount.

Minimum Invoice:Minimum invoice for complete product is $250.00 net product value. The minimum invoice for parts orders is $100.00 net product value. Any orders not totalling these minimums will be invoiced at the minimums. This policy does not include the following: Cut (bitted) Keys of any type, Master Keyed Cylinders, Master Keyed Padlocks and Factory Generated Bitting Lists. Same day order expedites will be invoiced at book less 50%.

Quotations:If ASSA ABLOY DSS Canada elects to offer a Quote, such Quote will be valid for ninety (90) days. Complete shipment of the order must be accepted by Purchaser within nine (9) calendar months from the date of issuance. The Quote number and project name must be refer- enced on the order. Any invoiced order that has the incorrect discount applied to it and did not have a Quote copy attached to the order or the Quote number written on the order will have a service fee of $75.00 net DEDUCTED from any sales credit issued for the difference in discount. The Quote is null and void if the Purchase Order does not include ALL product lines listed on the Quote or if the quantities for an item covered by the Quote deviate by 10% or more. The Purchaser will have to solicit a new quotation.Changes to original quote will be accepted up to thirty (30) days from the date of the original quote. All changes must reference the original quote number. With the issuance and acceptance of a Quote for the purchase of products, the Purchaser agrees that products so purchased will not be resold or transferred to any Distributor not authorized by ASSA ABLOY DSS Canada to sell its products. This would be inclu- sive of branches of the quoted Distributor. Failure to abide by this restriction may result in the Distributor’s ineligibility for Quotes, or other actions in ASSA ABLOY DSS Canada’s discretion. ASSA ABLOY DSS Canada and its sales representatives reserve the right, in their sole discretion and for any reason, to refuse a Distributor’s request to quote a price other than ASSA ABLOY DSS Canada’s standard list price and regardless of whether ASSA ABLOY DSS Canada or its sales representatives have previously quoted discounted prices to the Distributor on some or all of its orders.

Special Orders:Products not cataloged or listed in this price book will be considered as special products, and will not be manufactured without prior approval from ASSAABLOY DSS Canada. A minimum special handling charge of $50.00 will be added for non-cataloged product. Any additional labour or material required will be charged accordingly. Special products require special handling, and therefore standard lead times may not apply. Please consult with your Sales Representative for further details.

High Security Orders:To ensure proper contro l of End User restricted Products, ASSA ABLOY DSS Canada requires that the End User complete a Delivery of Controlled component form indicating to whom the product will be shipped to upon leaving the factory or the distribution centre. All orders must be accompanied with a current copy of the Authorization form and must be signed by the proper authorized personnel whose name(s) is on file with ASSA ABLOY DSS Canada.High Security products are defined as high security key blanks, cut keys, sidebars, sub assemblies, complete and master-keyed cylinders, and key charts.ASSA ABLOY DSS Canada reserves the right to request authorization from the end user if necessary before the order is processed.

Changes / Cancellation of Orders:Changes or cancellations to a non stock order that has been released to production will be subject to a charge of costs for material and labour expenses that have been incurred prior to notification from Customer. Handling charges are billed on Customer’s original order. All change requests for Mercury or Turbo goods must be submitted in writing to Customer Service within two (2) business days of receipt of acknowledgement of the order. In those instances where a cancellation is accepted, ASSA ABLOY DSS Canada reserves the right to make a reasonable cancellation charge based on expenses incurred.

ter

Ms

an

d c

on

dit

ion

s



ter

Ms a

nd

co

nd

itio

ns

Packaging:Many items are defined as to Case Lot Packaging or Minimum Order. The case lot policy does not apply to hardware to be used on a specific hardware project.

Delivery:Orders will be acknowledged and given a scheduled delivery date based on estimated manufacturing lead times. Complete information is required to process allorders. Orders with insufficient information for processing (i.e. keying information, door sizes, etc.) may be subject to extended lead times which are relativeto the time required in obtaining the necessary information for order processing. Manufacturing lead time will begin once all information is received to processan order. ASSA ABLOY DSS Canada will use reasonable efforts to deliver products as estimated, but makes no guarantee as to delivery dates. ASSA ABLOY DSS Canada will not be liable for back charges incurred based on availability of product or as a result of delays in delivery caused by insufficient information required to process an order. ASSA ABLOY DSS Canada will not be held responsible for delays in delivery caused by strikes, fires, floods or any other causes beyond our control, including the delivery of material to us. Under no circumstances shall ASSA ABLOY DSS Canada be liable or accountable for consequential damages due to failure of delivery. Unless your order specifies otherwise, partial shipments will be made on or after the scheduled delivery date.

Terms of Shipment:All products are shipped FOB the factory or the distribution center unless otherwise agreed to in writing from ASSA ABLOY DSS Canada. Title to and risk of loss product shipped is the responsibility of the purchaser and delivery is deemed to be complete upon transfer of the product to a common carrier. Carriers carry limited insurance. If the customer requires additional insurance coverage please contact our customer service department. All claims for shortages and damage are the responsibility of the purchaser. ASSA ABLOY DSS Canada will assist the Purchaser with documentation necessary to make a claim if requested to do so by the purchaser. ASSA ABLOY DSS Canada will ship via the best possible carrier. Shipments at the customer’s request will be prepaid and any up-charge (actual cost less the amount negotiated by ASSA ABLOY DSS Canada) will be added to the invoice.

Claims:In the event of ASSA ABLOY DSS Canada or Customer error, claims for shortages, pricing errors and/or incorrectly filled orders must be submitted in writing to Customer Service within thirty (30) days from receipt of material. Any claims for shortages or damage by the Carrier must be made by the Customer directly to the Carrier. Limited Carrier insurance is typically offered for all orders. If the Customer requires additional insurance, please contact a ASSA ABLOY DSS Canada Customer Service Representative upon submittal of the order. ASSA ABLOY DSS Canada will obtain requested insurance and the additional cost will be included on Customer’s invoice.

Invoice Deduction:An ASSA ABLOY DSS Canada Sales Representative or Customer Service Representative must be notified of any disputed invoices within thirty (30) days from the date of invoice. Deductions should only be taken for the disputed amount and the balance of the invoice is due and payable within standard payment terms.

Returned Goods:No Material is to be returned to our facilities without prior written approval from customer service. It is the policy of ASSA ABLOY DSS Canada to not acceptreturns of any materials that are correctly furnished as per the Distributor’s Purchase Order. Mercury and Turbo material may be returned with approval, if ASSA ABLOY DSS Canada believes the product is resalable. All such product must be returned in its original unmarked carton. The goods must have beenshipped and invoiced in the previous sixty (60) days. Returns will be at the distributor’s expense. The goods returned will be subject to inspection and a minimum 20% restocking fee will be applied to compensate for the cost of inspection, repacking and handling. Return of product due to customer order error or accommodation must be pre-arranged with ASSA ABLOY DSS Canada and approved in writing by Sales Management. A minimal restocking fee of 50% will be charged. Upon receipt and verification by ASSA ABLOY DSS Canada that the returned merchandise is in saleable condition and that the material can be returned to the original manufacturer. Defective goods that are out of warranty period will not be accepted for return. Products that are masterkeyed,special orders, key bitted will not be accepted under any circumstances, unless the product is determined to be defective.

Procedure:Ensure the RGA labels that are sent to Purchaser by ASSA ABLOY DSS Canada are visible on return goods shipment. Ensure that the RGA number appears on the return shipment label and is legible. Return the authorized merchandise within sixty (60) days from the date of RGA issuance. Return shipments must be freight prepaid to the distribution centre (at time some directions may apply to return the goods to the original manufacturer) ASSA ABLOY DSS Canada is not liable for damages to product during shipping. No credit may be taken or issued prior to RGA approval and receipt of product. All defective goods within the terms of our limited warranty may be returned for repair or replacement only.

Taxes:Prices do not include any present or future Federal, Province, or Local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments, which may result from transactions or any services performed in connection herewith.

Governing Law:The rights and obligations of the parties shall be governed by the laws of the Province of Ontario, excluding any conflicts of law provisions. The United NationsConvention on Contracts for the International Sale of Goods shall not apply to this.

Indemnity:Purchaser shall indemnify ASSA ABLOY DSS Canada and hold ASSA ABLOY DSS Canada harmless against all claims, liability, loss or other damages (including costs, legal or other wise incurred by ASSA ABLOY DSS Canada) to all persons for injury of any nature, including sickness and/or death, property damage at the time of delivery or after when the product is no longer in ASSA ABLOY DSS Canada possession or control.

Force Majeur:ASSA ABLOY DSS Canada shall not be liable for its failure to perform due to any contingencies beyond its control, including but not limited to acts of God,fires floods, wars, sabotage, accidents, labour disputes, shortages, government laws, ordinances, rules and regulations. ASSA ABLOY DSS Canada shall not be liable for its failure to deliver due to its inability to obtain materials, equipment failure, labour actions, transportation issues or any similar contingencies.In the event of delays due to the aforementioned contingencies, the date of delivery will be postponed by such length of time as the circumstances dictate.

Copyrights and Patents:All products in ASSA ABLOY DSS Canada catalogues, brochures and price lists are either patented, Copyrighted or registered by ASSA ABLOY DSS Canada.



STANDARD POWDER COAT FINISHES

$198.00/hinge, $99.00/edge guard-no minimum quantity, up to 8'.$396.00/hinge, $198.00/edge guard for lengths over 8', up to 10'. Over 10' consult customer service.

Nearest Markar EquivalentBHMA Description

690 PC-1714 PC-2693 PC-3689 PC-4706 PC-5691 PC-6605 PC-7

Dark BronzeEggshell WhiteSemi-Gloss BlackAluminumSun GoldLight CopperPolished Brass – refer to pricing below

PC-7 Polished Brass.100 and 300 series only.$352.00/hinge, $176.00/edge guard.$550.00/hinge, $275.00/edge guard lengths over 8', up to 10'.

CUSTOM POWDER COAT FINISHES

Over 84 colors available.Sample color chip must accompany order. Priced at time of order.

SPECIAL FINISHES

NearestUS EquivalentBHMA Description Up to 8' 8' to 10'

672 US26 629 US32

Polished Aluminum Polished Stainless

$579.00/hinge $726.00/hinge$579.00/hinge $726.00/hinge

Kynar Paint With Color Approval, consult customer service. Over 10' consult customer service.

hin

ge

fin

ish

es



U.S. STANDARD & B.H.M.A. FINISH CODES REFERENCE LIST

NearestUS EquivalentBHMA Description

310 US3311 US9312313 US20A

315 US19600 USP603 US2G628 US28629 US32630 US32D672 US26689 US28690 US20A691 US10693 US19706 US4714

gold anodizedlight bronze anodized medium bronze anodized dark bronze anodized black anodizedprimed for paintzinc platedclear anodizedbright stainless steel satin stainless steel bright polished aluminum aluminum paintdark bronze paintlight bronze paintblack paintgold paintwhite paint

SPECIAL ANODIZED FINISHES

NearestUS EquivalentBHMA Description

310 US3311 US9312315 US19

gold anodizedlight bronze anodized medium bronze anodized black anodized

Add $106.00/hinge to US20A (bronze) price.$284.00 setup charge for less than 10 hinges.

hin

ge fin

ishes



HINGE PREFIXES

EG Edge GuardFM Edge Mount FS Full SurfaceHG Hinge/GuardHM Half MortiseHS Half SurfaceSC Swing Clear

HINGE SERIES

100 Aluminum barrel hinges with stainless steel pin200 Carbon steel barrel hinges with stainless steel pin300 Stainless steel barrel hinges with stainless steel pin400 Spring loaded aluminum toilet partition hinges900 Spring loaded stainless steel toilet partition hinges3500 12 gauge stainless steel pin and barrel security hinges

Series number indicates the type of hinge and base material used.

HINGE MODELS

000102030405060809101115 21222325262729

Edge mount (formerly full mortise)Full surface 1/8" offsetFull surface, flushHalf surface, 1/8" offsetHalf mortise, 1/8" offsetEdge mount hinge/guardHalf mortise hinge/guardEdge guardFull surface, swing clearSwing clear hinge/guardEdge mount, self aligningEdge mount, self aligning flush edge guard Full surface inset, 3/4" offsetEdge mount hinge/guard, deepEdge mount hinge/guard, deep, thru bolt Edge mount swing clearEdge mount hinge/guard, swing clear Edge mount, safety hingeEdge mount, self aligning

The last two digits of the model number indicate the application. Other numbers are used for specific applications.

hin

ge

nu

Mb

erin

g s

yst

eM a

nd

sta

nd

ar

d l

eng

th

s

LEFT HAND RIGHT HAND

LEFT HANDREVERSE

RIGHT HANDREVERSE



OPTION SUFFIXES

AMS

CTP

DDP

EL

ETAP

EPT

HT

LL

PC

RB

WT

Adjustable Monitoring Switch

Current Transfer Preparation

Dutch Door Prep ElectroLynx®

Current Transfer Electrical

Transfer Access Prep Electrical

Power Transfer Hospital Tip

Lead Lined

Powder Coated

Raised Barrel

Wide Throw

STANDARD HINGE LENGTH CONVERSION CHART

Door Opening Actual Length

6'8" 79-3/16"

7'0" 83-1/8"

7'2" 85-1/8"

8'0" 95"

10'0" 118-3/4"

Custom hinge length will be evaluated at the time of request to ensure proper pin to knuckle alignment. Some custom length requests may be adjusted to ensure a proper hinge assembly.

SPECIFY HANDING ON ALL CUSTOM HINGE LENGTHS

CUSTOM DESIGNMarkar’s engineering department will be willing to assist you in developing custom applications to solve any of your unique door hinging problems. Together with the customer, we will go through an official sign-off process to assure custom hinges fit your exact needs.

There will be a custom drawing approval fee of $165.00 per opening. A credit for this fee is issued after approval for fabrication and placement of purchase order.

hin

ge n

uM

ber

ing

syst

eM a

nd

stan

da

rd

leng

th

s



Hinge Suffix Description

Addition to hinge cost

HT-MP Hospital TipAvailable on all models except spring-loaded toilet partition hinges.

+$ 91.00

DDP-MP

Dutch Door PrepContinuous frame leaf with two-piece door leaf.Indicate handing, clearances, door and frame heights, and materials when ordering. Available on all models.

+$ 91.00

WT Wide Throw — FM300WTSpecify distance from pin centerline to heel edge of hinge when ordering.Note: Reinforcement may be required on extreme wide throw applications. Please contact our Customer Service or Technical Support departments at (800) 824-3018.

Page 13 for pricing

RB-MP Raised Barrel (Swaged)For cased open or center pivot doors.Available on all edge mount and half surface models except on aluminum hinges.

+$ 78.00

LL-MP Lead Lined CoverUsed for X-ray room doors and other locations where radiation leakage could be a problem. Only available on surface mounted hinges. Lead lined astragal for EGT + $317.00/astragal. Staggard hole pattern for EG/EGT + $66.00/astragal.

+$ 185.00

Sheared LeafUsed for narrow door thicknesses, unevenly rabbeted frames or other special application. Specify distance from pin centerline to heel edge of hinge when ordering. For steel and stainless steel hinges only.

+$ 106.00

Custom Hole PatternAny hole shape or pattern other than Markar's standard templated hole pattern. Indicate desired pattern and include dimensioned diagrams when ordering.

Up to 85" +$ 154.00 Over 85" +$ 198.00

Security StudsStainless steel security studs mounted to the frame leaf.Door leaf is drilled to accommodate studs. Three studs installed on hinges up to 85", four studs installed on hinges over 85". Door and frame must be specially prepared to accommodate security studs.

Up to 85" +$ 132.00 Over 85" +$ 176.00

Automatic Door Bottom Cut +$ 76.00

Welded End Pins +$ 100.00

Plug Weld +$ 74.00

Blank Hinges Holes omitted for special applications such as welded installations. +$ 110.00

Cut to Length• For hinges 40" to 83-1/8" in length, add $66.00 to 7'0" price• For hinges 83-3/16" to 95" in length, add $66.00 to 8'0" price• For hinges 95-1/16" to 118-3/4" in length, add $66.00 to 10'0" price• For hinges 118-13/16" to 192" in length (spliced), consult customer service• For edge guards add $37.00

co

nt

inu

ou

s h

ing

e M

od

ific

at

ion

s



Product Number Description

Addition to hinge cost

ElectroLynx® Current TransferEL4 For 300, 3500, 100, and 200 series edge mount only. 28

gauge wires – with ElectroLynx® connectors (4 wire).+$ 495.00

EL8 For 300, 3500, 100, and 200 series edge mount only. 28 gauge wires – with ElectroLynx® connectors (8 wire).

+$ 660.00

EL12 For 300, 3500, 100, and 200 series edge mount only.28 gauge wires – with ElectroLynx® connectors (12 wire).

+$ 880.00

ETAP Electrical Transfer Access PrepCutout prep for the AMS and EL. Modifications allow easy one person access to wiring between the hinge and door frame.

+$ 194.00

CTP Current Transfer PrepCenterline of hinge is standard location. Hinge leaf cutout to accommodate Markar's EL-EPT/EL-CEPT or Von Duprin's Electric Power Transfer. Provide location and handing for all locations. Please add $ 132.00 to the cost of the hinge for all swing clear models.

+$ 106.00

Electric Power Transfer UnitsEL-EPT Stamped Power Transfer 12 Wire ElectroLynx® +$ 218.00EL-EPTL Stamped Long Power Transfer 12 Wire ElectroLynx® +$ 282.00EL-EPT-SC Stamped Swing Clear Power Transfer 12 Wire ElectroLynx® +$ 377.00

+$ 550.00+$ 572.00

EL-CEPTx32D Cast Power Transfer 12 Wire ElectroLynx® US32D

EL-CEPTx10B Cast Power Transfer 12 Wire ElectroLynx® US10B

Note: CTP prep charge is additional.

AMS Adjustable Monitoring SwitchRigid welded assembly gives you the ability to adjust your monitoring switch to work with all applications. Not available on aluminum hinges or powder coat finishes.

+$ 526.00

Standard Edge Guard Cutouts - Add for each cutout. For custom cutouts, consult factory for pricing. Templates may be required.

16L +$ 55.0086M +$ 55.00ASA +$ 55.0016S +$ 55.00MFB +$ 55.00AFB +$ 55.00

1-1/8" x 2-1/4" 161 Latch

1-1/4" x 8" Mortise Lock

1-1/4" x 4-7/8" ASA Strike

1-1/8" x 2-3/4" 161 Strike

1" x 6-3/4" Manual Flush Bolt

1" x 8-1/2" Automatic Flush Bolt

Cut down charge for special lengths +$ 36.00

Page 25 for pricing

Security FastenerTorx head security fasteners are available in lieu of standard fasteners.See hinge types for options. Refer to pages 25-27 for detailed fastener information.

Welded Tabs For Edge Guards - used for attaching peripheral hardware. One charge includes two tabs per cut-out.

+ $ 55.00

co

nt

inu

ou

s hin

ge a

nd

edg

e gu

ar

d M

od

ifica

tio

ns

OPEN 180°

3/4"

OPEN 90°CLOSED

5/8"

1 15/16"

1 5/8"

2 5/16"



Product Number Description Standard Finish Length

SuggestedList Price

FM3500 Edge Mount Security Hinge

$ 1001.00$ 1001.00

Standard Screw Pack MS1244SP10SS24

Security Screw Pack (Optional) M91-0031

$ 1,177.00

$ 1,177.00

Satin Stainless Steel 6'8" (79-3/16")



Satin Stainless Steel 8'0" (95")

Satin Stainless Steel 10'0" (118-3/4") $ 1,430.00

FS3501 Full Surface Security Hinge 1/8" Inset

$ 1,188.00

$ 1,188.00



$ 1,265.00

$ 1,265.00






FS3502 Full SurfaceSecurity Hinge

$ 1,188.00

$ 1,188.00



$ 1265.00

$ 1,265.00





Satin Stainless Steel 10'0" (118-3/4") $ 1,58400

HG3505 Hinge GuardSecurity Hinge

$ 1,254.00

$ 1,254.00

Standard Screw PackMS1244SP10SS24

Security Screw Pack (Optional)

$ 1,430.00

$ 1,430.00





Satin Stainless Steel 10'0" (118-3/4") $ 1,705.00M91-0031Adjustable Screw Pack (Optional) M91-0002-630

• All hinges come with UL fire rated label as standard• FM3500 can be used on doors up to 2-1/4"• Hospital Tip is a standard feature at no additional charge• Security Fasteners – refer to pages 25-27• When ordering Security Screw Packs, please specify either All Wood (WW), All Metal (MM) orHalf Metal/Half Wood (MW)

• Adjust-A-Screw™ option is available for applicable models as shown. – add $28.00 per Edge Guard• See page 25 for Screw Pack Pricing

Optional

3500

ser

ies

sta

inle

ss s

tee

l pi

n a

nd

ba

rr

el s

ecu

rit

y h

ing

es

P. NGUYEN

B

P. NGUYEN

B




SuggestedList Price

FM300 Edge MountPin and Barrel Hinge

$ 550.00

$ 550.00Standard Screw Pack KMPSS


$ 594.00

$ 638.00

Satin Stainless Steel 6'8" (79-3/16") Satin Stainless Steel 7'0" (83-1/8") Satin Stainless Steel 7'2" (85-1/8") Satin Stainless Steel 8'0" (95")Satin Stainless Steel 10'0" (118-3/4") $ 946.00

FM300WT10 Edge Mount — Wide ThrowPin and Barrel Hinge 2" Clearance

$ 871.00

$ 871.00

$ 990.00

$ 990.00






$ 664.00

$ 664.00

FM300WT20 2-0" Clearance

FM300WT30 3-3/16" Clearance

FM300WT40 3-7/8" Clearance $ 1,040.00

FM300WT50 5" Clearance

add add add add $ 1,040.00

Standard Screw Pack KMPSS

Security Screw Pack (Optional)M91-0031Consult factory for doors over 1-3/4" thick.

FS301 Full Surface 1/8" InsetPin and Barrel Hinge

$ 792.00

$ 792.00Standard Screw Pack M91-0003-630

Security Screw Pack (Optional)M91-0063-630

$ 924.00

$ 924.00

Satin Stainless Steel 6'8" (79-3/16") Satin Stainless Steel 7'0" (83-1/8") Satin Stainless Steel 7'2" (85-1/8") Satin Stainless Steel 8'0" (95") Satin Stainless Steel 10'0" (118-3/4") $ 1,298.00

FS302 Full Surface Flush MountPin and Barrel Hinge

$ 792.00


Security Screw Pack (Optional) M91-0063-630

$ 924.00

$ 924.00


HS303 Half SurfacePin and Barrel Hinge

$ 726.00

$ 726.00Standard Screw Pack M91-0003-630, KMSSS

Security Screw Pack (Optional) M91-0031, M91-0063-630

$ 847.00

$ 847.00






300 series sta

inless st

eel pin a

nd

ba

rr

el hin

ges

Optional

OptionalOPEN 180°

3/4"

OPEN 90°CLOSED

5/8"

1 15/16"

1 5/8"

2 5/16"




SuggestedList Price

HM304 Half MortisePin and Barrel Hinge

$ 715.00

$ 715.00Standard Screw Pack M91-0003-630, KMSSS


$ 825.00

$ 825.00

Satin Stainless Steel 6'8" (79-3/16") Satin Stainless Steel 7'0" (83-1/8") Satin Stainless Steel 7'2" (85-1/8") Satin Stainless Steel 8'0" (95") Satin Stainless Stee 10'0" (118-3/4") $ 1,078.00

HG305 Hinge/GuardPin and Barrel Hinge

$ 792.00


Security Screw Pack (Optional)

$ 836.00

$ 880.00

Satin Stainless Steel 6'8" (79-3/16") Satin Stainless Steel 7'0" (83-1/8") Satin Stainless Steel 7'2" (85-1/8") Satin Stainless Steel 8'0" (95") Satin Stainless Steel 10'0" (118-3/4") $ 1,276.00M91-0031

Adjustable Screw Pack (Optional) M91-0002-630

HG306 Hinge/GuardPin and Barrel Hinge

$ 737.00

$ 737.00Standard Screw Pack KMSSS, M91-0003-630


$ 869.00

$ 869.00

Satin Stainless Steel 6'8" (79-3/16") Satin Stainless Steel 7'0" (83-1/8") Satin Stainless Steel 7'2" (85-1/8") Satin Stainless Steel 8'0" (95") Satin Stainless Steel 10'0" (118-3/4") $ 1,11100

EG308 Edge Guard*Use attached order form on page 29

$ 330.00




$ 363.00

$ 363.00

Satin Stainless Steel 6'8" (79-3/16") Satin Stainless Steel 7'0" (83-1/8") Satin Stainless Steel 7'2" (85-1/8") Satin Stainless Steel 8'0" (95") Satin Stainless Steel 10'0" (118-3/4") $ 473.00

Standard for 1-3/4" bevel edge doors; square edge available upon request. See page 11 for optional hardware cutouts and cut to net size.

*Use attached order form on page 29.$ 297.00



$ 330.00

$ 330.00

EGC308 Edge Guard Satin Stainless Steel 6'8" (79-3/16")




Satin Stainless Steel upon 10'0" (118-3/4") $ 418.00

Standard for 1-3/4" bevel edge doors; square edge available request. See page 11 for optional hardware cutouts and cut to net size.

300

ser

ies

sta

inle

ss s

tee

l pi

n a

nd

ba

rr

el h

ing

es

1/2"

3/4"

1 11/16"

1/8"

1 3/4"

3/4"

1 15/16"

5/8"

1/4"




SuggestedList Price

EGT308 Edge Guard*Use attached order form on page 29.

$ 396.00



Security Screw Pack (Optional) M91-0031WW

$ 462.00

$ 462.00

Satin Stainless Steel 6'8" (79-3/16") Satin Stainless Steel 7'0" (83-1/8") Satin Stainless Steel 7'2" (85-1/8") Satin Stainless Steel 8'0" (95") Satin Stainless Steel 10'0" (118-3/4") $ 583.00

Standard for 1-3/4" bevel edge doors; square edge available upon request. See page 11 for optional hardware cutouts and cut to net size.

FS/SC309 Full Surface Swing ClearPin and Barrel Hinge

Satin Stainless Steel 6'8" (79-3/16") $ 902.00

Satin Stainless Steel 7'0" (83-1/8") $ 902.00Standard Screw Pack M91-0003-630, KMSSS

Security Screw Pack (Optional)M91-0031, M91-0063-630


Satin Stainless Steel 8'0" (95") $ 1,045.00


HG310 Swing Clear Hinge/GuardPin and Barrel Hinge






Satin Stainless Steel 8'0" (95") $ 1,111.00


Adjustable Screw Pack (Optional)M91-0002-630

For square edge doors.

HG311 Swing Clear Hinge/Guard Pin and Barrel Hinge

Satin Stainless Steel 6'8" (79-3/16") $ 781.00Satin Stainless Steel 7'0" (83-1/8") $ 781.00




Satin Stainless Steel 8'0" (95") $ 891.00



HG315 Edge Mount Hinge/GuardPin and Barrel Hinge

$ 616.00

$ 616.00



$ 660.00

$ 704.00

Satin Stainless Steel

6'8" (79-3/16") Satin Stainless Steel



8'0" (95") Satin Stainless Steel

10'0" (118-3/4")

$ 1,023.00

Optional

Optional

300 series sta

inless st

eel pin a

nd

ba

rr

el hin

ges

CLOSED OPEN 90°

1 15/16"

1 11/16" 5/8"

2 5/16"

OPEN 180°

11/16"

1/16"

2 1/4"

4 1/2"

1 23/32"

5/8"

5/32"

1 15/16"




SuggestedList Price

FS321 Full Surface 3/4" OffsetPin and Barrel Hinge

$ 990.00



$ 1,122.00

$ 1,122.00


HG322 Edge Mount Hinge/Guard Pin and Barrel Hinge

$ 1,111.00

$ 1,111.00


Security Screw Pack (Optional)M91-0031

$ 1,287.00

$ 1,287.00







HG323 Edge Mount Hinge/GuardPin and Barrel Hinge

$ 1,155.00

$ 1,155.00

Standard Screw Pack M91-0064-02-630


$ 1,331.00

$ 1,331.00






FM/SC325 Edge Mount Swing Clear Hinge

$ 858.00



$ 1,001.00

$ 1,001.00








$ 1,100.00

$ 1,100.00

Standard Screw Pack KMPSSSecurity Screw Pack (Optional) M91-0031Adjustable Screw Pack (Optional) M91-0002-630

$ 1,243.00

$ 1,243.00






Optional

Optional


300

ser

ies

sta

inle

ss s

tee

l pi

n a

nd

ba

rr

el h

ing

es




SuggestedList Price

FM327 Edge Mount Safety Hinge Pin and Barrel Hinge


$ 957.00

NON-FIRE RATED $ 1,078.00



$ 1,078.00







$ 924.00



$ 1067.00

$ 1067.00





• All applicable hinges come with UL fire rated label as standard. Please specify if WHI label is required.• When ordering Security Screw Packs, please specify either All Wood (WW), All Metal (MM) orHalf Metal/Half Wood (MW).

• Add $ 54.00 list per hinge for optional TB1420SS thru-bolts.• Adjust-A-Screw™ Option for Edge Guards – add $28.00 per Edge Guard.• Degree of bevel for EG is 88°.• MTSP100 is recommended for installing HG310 & HG311.• See page 25 for Screw Pack Pricing.


300 series sta

inless st

eel pin a

nd

ba

rr

el hin

ges



Product Number Description Standard Finish

SuggestedList Price

FM200 Edge MountPin and Barrel Hinges

$ 418.00Zinc Plated Steel

Zinc Plated Steel $ 418.00





FS201 Full Surface 1/8" Inset Pin and Barrel Hinges



Standard Screw Pack M91-0003-630




FS202 Full Surface Flush Mount Pin and Barrel Hinges



Standard Screw Pack M91-0003-630



Zinc Plated Steel $638.00

HS203 Half SurfacePin and Barrel Hinges



Standard Screw Pack KMPSS, M91-0003-630




HM204 Half MortisePin and Barrel Hinges



Standard Screw Pack KMPSS, M91-0003-630




• All hinges come with UL fire rated label as standard.• Please specify if WHI label is required.• When ordering Security Screw Packs, please specify either All Wood (WW), All Metal (MM) orHalf Metal/Half Wood (MW).

• Add $60.00 list per hinge for optional TB1420SS thru-bolts.• Finish is zinc plated steel. See page 6 for additional finish options.• See page 25 for Screw Pack Pricing.

200

ser

ies

ca

rbo

n s

tee

l pi

n a

nd

ba

rr

el h

ing

es

6'8" (79-3/16")

7'0" (83-1/8")

7'2" (85-1/8")

8'0" (95")

6'8" (79-3/16")

7'0" (83-1/8")

7'2" (85-1/8")

8'0" (95")

6'8" (79-3/16")

7'0" (83-1/8")

7'2" (85-1/8")

8'0" (95")

6'8" (79-3/16")

7'0" (83-1/8")

7'2" (85-1/8")

8'0" (95")

6'8" (79-3/16")

7'0" (83-1/8")

7'2" (85-1/8")

8'0" (95")



Product Number Description Length

Standard Finish

SuggestedList Price

StandardFinish

SuggestedList Price

FM100 Edge MountPin and Barrel Continuous Hinges

6'8" $ 550.00

7'0" $ 550.00

Standard Screw Pack Aluminum: KMPSS Bronze: M91-0001-313

Security Screw Pack (Optional) Aluminum: M91-0031 Bronze: M91-0030

7'2" $ 682.00

8'0"

(79-3/16") Clear Anod



(95") Clear Anod

$ 506.00 Bronze Anod



$ 583.00 Bronze Anod $ 682.00

FS101 Full Surface 1/8" InsetPin and Barrel Continuous Hinges

6'8" $ 759.00

7'0" $ 759.00

Standard Screw Pack Aluminum: M91-0003-626 Bronze: M91-0003-313


7'2" $ 869.00

8'0"




(95") Clear Anod




$ 693.00 Bronze Anod $ 869.00

FS102 Full SurfacePin and Barrel Continuous Hinges

6'8" $ 759.00

7'0" $ 759.00



7'2" $ 869.00

8'0"




(95") Clear Anod




$ 693.00 Bronze Anod $ 869.00

HS103 Half SurfacePin and BarrelContinuous Hinges

6'8" $ 704.00

7'0" $ 704.00

Standard Screw Pack Aluminum: M91-0003-626, KMSSS Bronze: M91-0001-313, M91-0003-626

Security Screw Pack (Optional) Aluminum: M91-0031, M91-0047-630Bronze: M91-0030, M91-0047-313

7'2" $ 836.00

8'0"




(95") Clear Anod




$ 671.00 Bronze Anod $ 836.00

HM104 Half Mortise Pin and Barrel Continuous Hinges

6'8" $ 704.00

7'0" $ 704.00

Standard Screw Pack Aluminum: M91-0003-626, KMSSS Bronze: M91-0001-313, M91-0003-626

Security Screw Pack (Optional) Aluminum: M91-0031, M91-0047-630Bronze: M91-0030, M91-0047-313

7'2" $ 836.00

8'0"




(95") Clear Anod




$ 671.00 Bronze Anod $ 836.00

100 series a

luM

inu

M pin

an

d b

ar

rel c

on

tin

uo

us h

ing

es

Optional



Product Number Description Length

Standard Finish

SuggestedList Price

Standard Finish

SuggestedList Price

HG105 Hinge/Guard Pin and Barrel Continuous Hinges

6'8" $ 726.00

7'0" $ 726.00

Standard Screw Pack Aluminum: KMPSS Bronze: M91-0001-313

Security Screw Pack (Optional) Aluminum: M91-0031Bronze: M91-0030

7'2" $ 825.00

8'0"




(95") Clear Anod




$ 748.00 Bronze Anod $ 825.00

Adjustable Screw Pack (Optional) Aluminum M91-0002-630

EG108 Edge Guard Pin and Barrel Continuous Hinges*

6'8" $ 275.00

7'0" $ 275.00


Adjustable Screw Pack (Optional) Aluminum: M91-0005-630 Bronze: M91-0005-313

Security Screw Pack: Aluminum: M91-0031WW Bronze: M91-0030WW

7'2" $ 319.00

8'0"




(95") Clear Anod




$ 286.00 Bronze Anod $ 319.00

Standard for beveled edge doors * Use attached order form on page 29.

• When ordering Security Screw Packs, please specify either All Wood (WW), All Metal (MM) orHalf Metal/Half Wood (MW).

• For optional M26-0015-02 Molly Jack Nuts add $4.00 (per each) list..• Add $6.00 per four-pack list for optional TB1420Z4 thru-bolts.• Aluminum 628 clear anodized.• Bronze 313 dark bronze anodized.• Adjust-A-Screw™ option available for applicable models as shown. Add $28.00 per hinge.• See page 25 for Screw Pack Pricing.• Aluminum pin and barrel hinges are NOT fire-rated.

Optional

100

ser

ies

alu

Min

uM

pin

an

d b

ar

rel

co

nt

inu

ou

s h

ing

es



ALUMINUM TOILET PARTITION HINGES

FS402 Flush Spring Loaded Pin and Barrel Toilet Partition Hinges*Safety lift feature available.

Clear Anod Aluminum 54" $ 602.00



• Door weight shall not exceed 80 pounds.• Add $52.00 for Safety Lift Feature on applicable models.• Add $68.00 for one-way shoulder bolt security option for FS402.• Special length hinges (24" long minimum; less than 54") + $124.00/hinge. (Check factory, for over 54" length).


SuggestedList Price

STAINLESS STEEL TOILET PARTITION HINGES Product

Number Description Standard Finish

LengthSuggestedList Price

FS902 Flush Spring-Loaded Pin and BarrelToilet Partition Hinges



54"57"

$ 719.00$ 747.00

FS910 Flush Spring-Loaded Surface-Mounted Toilet Partition Hinges




54"57"72"

$ 671.00$ 671.00$ 726.00

• For full function of Markar’s spring-loaded hinge, door weight shall not exceed 80 pounds.• Add $50.00 for torx drive/torx shoulder security option.• Special length hinges (24" long minimum, less than 54") + $92.00/hinge.

toilet pa

rt

itio

n h

ing

es



CONTINUOUS HINGE SHIMS

Product Number Description Properties Length

SuggestedList Price

CHS-1 Continuous Hinge Shim Slip-In Installation.

$ 70.00

$ 72.00

16 gauge (1/16" thickness)

6'8" (79-3/16") 16 gauge (1/16" thickness)

7'0" (83-1/8") 16 gauge (1/16" thickness)

8'0" (95")

$ 75.00

CHS-2 Continuous Hinge Shim Hinge must be removed.

$ 84.00

$ 88.00

16 gauge (1/16" thickness)

6'8" (79-3/16") 16 gauge (1/16" thickness)

7'0" (83-1/8") 16 gauge (1/16" thickness)

8'0" (95")

$ 91.00

• Not available in 10'0" length.• Cut down charge for special lengths $37.00.• 16 gauge galvanneal.

LET MARKAR’S CONTINUOUS HINGE SHIM SOLVE YOUR PROBLEM OF NON-SQUARE FRAMES AND IMPROPER DOOR CLEARANCES.

CHS-1 CHS-2

toil

et p

ar

tit

ion

hin

ges

&

co

nt

inu

ou

s h

ing

e sh

iMs



REINFORCING PIVOT HINGES

Product

Number Description Standard FinishSuggestedList Price

B1921 Full Surface1/2" offset for 4" Hinges

Zinc Plated (US2G) $90.00

B1923 Full Surface3/4" offset for 4 1/2" Hinges

Zinc Plated (US2G) $90.00

MILL 200 SERIES HINGES

BRUSHED 300 SERIES HINGES

SURFACE LEAF HINGE PARTS

Product

Number Description LengthStandard Finish

SuggestedList Price

Standard Finish SuggestedList Price

MP-810 Snap-on cover 100 Series

6'8" $ 62.00

7'0" $ 62.00

7'2" $ 63.00

8'0"

(79-3/16") Clear Anod $ 40.00 Bronze Anod



(95") Clear Anod $ 47.00 Bronze Anod $ 67.00

Specify door height and finish.

MP-506 Snap-on cover 200 and 300 Series

$ 73.00

$ 73.00

$ 77.00

(79-3/16") Mill

(83-1/8") Mill

(85-1/8") Mill

(95") Mill

(118-3/4") Mill

$ 81.00

$ 48.00 Brushed

$ 48.00 Brushed

$ 49.00 Brushed

$ 51.00 Brushed

$ 66.00 Brushed $ 101.00

Specify door height and finish. 200 Series: Mill Finish300 Series: Brush Finish


SuggestedList Price

MP-606 Cover clipFor attaching MP-506 cover caps to surface mounted 200 and 300 series hinge leaves (Quantity 20).

$ 26.00

rein

for

cin

g piv

ot h

ing

es an

d su

rfa

ce h

ing

e leaf pa

rt

s

6'8"

7'0"

7'2"

8'0"

10'0"




SuggestedList Price

TORXBIT20 Used on TORX-MS1244SP10SS, TORX-PBS12150SP10SS, and TORX-MS10075SS.

$ 11.00

TORXBIT27 Used on S312C14T12-630 and to adjust 400 and 900 series spring-loaded hinges.

$ 11.00

TORXBIT15 Used on TORX-TKS8075Z $ 11.00

MT-806 Center punch for centering screw holes when installing hinges and countersunk hardware.

$ 20.00

MTSP100 Right angle screwdriver used for installing HG-310 and HG-311 hinge/guards. $ 199.00

MT-R-3 Installer rod for installing Molly Jack nuts with MT-1956 installer (8S-JN 1/4-20 nuts).

$ 69.00

MT-1956 Molly Jack Nut installer includes 1/4-20 installer rod. $ 576.00

MP-UBOX Hinge Carton. Please specify (a) Length (b) 1" x 3" (c) 1-1/2" x 3". $ 14.00

too

ls a

nd

ac

ces

sor

ies



Product Number Screw Types Included* Quantity Each

SuggestedList Price

M91-0001-313 TKS1276SP10SSBL PBS1215OSP10BL

48 24

$ 35.00

M91-0002-313 M26-0031-01, MS10075SS, TKS1267SP10BL 23 $ 78.00

M91-0002-630 M26-0031-01, TKS1267SP10SS, MS10075SS 23 $ 76.00

M91-0003-313 S323-08R12-663 S308-416T12-60

2 16

$ 11.00

M91-0003-626 S308-416T12-603 S323-08R12-603

162

$ 11.00

M91-0003-630 S323-08R12-603 M22-0130-01 S308-416T12-60

2616

$ 18.00

MS10075SS, M26-0031-01 12 $ 33.00

PBS12150SP10SS, TKS1267SP10SS 12 $ 11.00

PBS12150SP10BL, TKS1267SP10BL 12 $ 13.00

M91-0005-630 M91-0013-628 M91-0013-313 M91-0020-630 PBS12150SP10SS, TKS1267SP10SS 9 $ 11.00

TORX-MS1244SP10BL 48 $ 55.00

TORX-MS1244SP10BL, TORX-PBS12150SP10BL 24 $ 55.00

TORX-PBS12150SP10BL 48 $ 55.00

TORX-MS1244SP10SS 48 $ 52.00

TORX-MS1244SP10SS, TORX-PBS12150SP10SS 24 $ 52.00

TORX-PBS12150SP10SS 48 $ 52.00

M91-0030MM

M91-0030MW

M91-0030WW

M91-0031MM

M91-0031MW

M91-0031WW

M91-0032-630 M26-0031-01, TORX-MS1244SP10SS, TORX-MS10075SS

23 $ 52.00

M91-0047-630 S308-416T12-603 TORX-TKS8075Z

162

$ 15.00

M91-0063-630 TORX-TKS8075ZS308-416T12-603 M22-0130-01

2166

$ 22.00

M91-0064-02-630 TKS1267SP10SS, PBS12150SP10SS 2411

$ 134.00

KMPBL P10BL, PBS12150SP10BL 24 $ 29.00

KMSSS TKS1267SP10SS, PBS12150SP10SS 24 $ 46.00

KMPSS PBS12150SP10SS2

TKS1267SP10SS24

24 48

$ 22.00

*See pages 26-27 for Screw Type Descriptions

scr

ew pa

ck

s - sold

separ

at

ely

MS14075TSS, TB1420SS



Product Number Description Properties

SuggestedList Price

12-24 x 11/16 x #10 Head, Flat Head Undercut Self-Drilling Screw

Stainless Steel $ 11.00TKS1267SP10SS24TKS1267SP10BL24

(24 Pack)

Replaces MP-10, MP-11, MP-12 (24 Pack) Black Zinc $ 13.00

#8 x 3/4" Flat Head Self-Drilling Screw

Formerly MP-8; For attaching 100, 200, and 300 series covers (Per each)

Zinc Phillips $ 1.00

Formerly MP-9; For attaching 100, 200, and 300 series covers (Per each)

Black $ 1.00

S323-08R12-603

S323-08R12-663

TORX-TKS8075Z Formerly MP-61; For attaching 100, 200, and 300 series covers (Per each)

Zinc Torx $ 2.00

12-8 x 1-1/2 x #10 Head, Particle Board Screw

PBS12150SP10SS24 Formerly MP-28; For edge mounting to wood (24 Pack)

Stainless Steel $ 8.00

PBS12150SP10BL24 Formerly MP-29; For edge mounting to wood (24 Pack)

Black $ 9.00

TORX-PBS12150SP10SS24 Formerly MP-54; For edge mounting to wood. Security Pin. (24 Pack)

Stainless Steel Torx

$ 23.00

1-3/8" Adjust-A-Screw™ With 10-32 Internal Thread and Hex Head Adjustment

M26-0031-01 Formerly MP-25; Right Hand used with MS10075 screw (Per each)

$ 3.00

Note: 5/16" pilot hole required for 3/8" - 16 tap 12 ga. reinforcement required

10-32 x 3/4" Flat Head Machine Screw

MS10075SS Formerly MP-7; Used with M26-0031-01 Adjust-A-Screw™ (Per each)

Stainless Steel Phillips

$ 1.00

TORX-MS10075SS Formerly MP-55; Used with M26-0031-01 Adjust-A-Screw™ (Per each)

Stainless Steel Torx

$ 2.00

MS10075BL Used with M26-0031-01 Adjust-A-Screw™ (Per each)

Black SS $ 1.00

TORX-MS10075BL Used with M26-0031-01 Adjust-A-Screw™ (Per each)

Black SS Torx $ 2.00

fast

ener

pr

icin

g



Product Number Description Properties

SuggestedList Price

12-24 x 7/16 x #10 Head, Flat Head Undercut Machine Screw, with Security Pin, Tri-Round Threads

TORX-MS1244SP10SS24 Formerly MP-52; For edge mounting to metal (24 Pack)

Stainless Steel Torx $ 23.00

TORX-MS1244SP10BL24 (24 Pack) Black SS Torx $25.00

TC316125

3/16 x 1-1/4 Phillips Flat Head Concrete ScrewFormerly MP-60; (Per each) Zinc $ 1.50

1/4-20 x 1-5/8" Thru-bolt

TB1420Z4 Formerly MP-22; For surface mounting to wood (4 pack)

Zinc Steel $ 7.00

TB1420SS Formerly MP-23, replaces MP-38. For surface mounting to wood (Per each)

Stainless Steel $ 10.00

TB1420BL4 Black $ 7.00

TB138Z1/4-20 x 1-1/4" Thru-boltFormerly MP-24 For surface mounting to wood (Per each)

Zinc $ 2.00

M26-0015-028 SJN 1/4-20 Molly Jack Nut

Formerly MP-20; 7/16" hole (Per each) Zinc $ 4.00

S312C14T12-630

#14 x 3/4" T-27 Torx Button Head Sheet Metal ScrewFormerly MP-49. (Per each) Stainless $ 4.00

S308-416-12-603

1/4-14 x 3/4" Pan Head Self-Drilling Screw Formerly MP-62; For surface mounting to metal (Per each)

Zinc Torx $ 4.00

1/4-20 x 1" Pan Head Machine Screw

S222-416R16-603 Formerly MP-14; For surface mounting to metal (Per each)

Zinc Phillips $ 1.50

TORX-MS14100Z Formerly MP-65; For surface mounting to metal (Per each)

Zinc Torx $ 2.00

fast

ener pr

icin

g

Formerly MP-25. For surface mounting to wood (4 Pack)




SuggestedList Price

FA-68 Galvanneal For 6'8" door $ 84.00

FA-70 Galvanneal For 7'0" door $ 84.00

FA-80

Flat Astragal (each) Flat Astragal (each) Flat Astragal (each) Galvanneal For 8'0" door $ 88.00

• Holes are countersunk and equally spaced• 1/8" x 2" galvanneal steel• Available with thru-bolt option - add $20.00 for nine-pack (ZTB-KIT9) or $22.00 for eleven-pack (ZTB-KIT11)

fa70fa68 fa80

fla

t a

str

ag

als



VAUGHAN, ON T: 800-461-3007F: 800-461-8989

edg

e gu

ar

ds o

rd

er for

M



To process order, please circle handing illustrated below.

VAUGHAN, ON T: 800-461-3007F: 800-461-8989

cu

rr

ent t

ra

nsf

er p

rep

info

rM

at

ion

fo

rM

Copyright © 2014, Pemko Manufacturing Co., an ASSA ABLOY Group Company. All Rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience. 12/13

ASSA ABLOY Door Security Solutions Canada160 Four Valley DriveVaughan, ON L4K 4T9T: 800-461-3007www.assaabloy.ca

Date post:	30-Jun-2018
Category:	Documents
Upload:	hoangxuyen
View:	219 times
Download:	0 times

Markar 2014 Canadian Price List - Ceco Door Books/2014 Price Books... · Hinge Finishes ... Markar...

Documents