A minimal total cost of ownership was the driving force behind the development of the Mars range. It is equipped with LEDs and various dimming and remote management options for a dramatic reduction in energy consumption. It offers a very competitive alternative to luminaires equipped with traditional light sources such as high- pressure sodium lamps. MAXIMUM ENERGY SAVINGS 6 0W / 8 0W / 100W A series street light specification www.free-life.it
Transcript
A minimal total cost of ownership was the driving force behind the development of the Mars range. It is equipped with LEDs and various dimming and remote management options for a dramatic reduction in energy consumption. It offers a very competitive alternative to luminaires equipped with traditional light sources such as high-pressure sodium lamps.
MAXIMUM ENERGY SAVINGS
60W / 80W / 100W
A series street light specification
www.free-life.it
5000190
60W
STREET LIGHT SPECIFICATION SHEET
SMALL MODEL 80W 100W
• Excellent for main roads, collecting roads, and roundabouts
• Complete illumination across the entire roadway
• No external reflectors required
• Safe for industrial applications
• High performance design
• Dramatic energy savings
SLEEK DESIGN
The LEDS Module and Driver can be easily removed, allowing real on-site replacement at the end of its service life in order to take advantage of future technological developments.This easy and rapid procedure reduces maintenance costs and contributes to reducing the total cost of ownership.
Using state-of-the-art technology, Wars luminaires have been designed to fulfil the Future Proof concept. The photometric engine is IP 66 sealed to protect the LEDs and lenses from coming into contact with the outside environment and so maintain photometric performance over time.
The smooth, anti-static surface of the Mars reduces dust, sand and avoid bird droppings and other material accumulation.
Ip66 protection with durable electrostatic spray which apply to harsh outdoor applications. Tool free for open, reasonable layout design brings simple maintenance.
The UV protection and high strength anti-corrosion coating minimizes wear and increasesthe fixture’s lifespan.
STREET LIGHT SPECIFICATION SHEET
SMALL MODEL 60W 80W 100W
System Efficacy Up to 130 LPW (CCT = 4000K)
Model
Optical Characteristics
7800 lm 10400 lm
CCT 3000K
CRI >70
Weight/Packaging
68x 35 x 19cm
Packaged Weight 6.6 kg (Standard)
5000K 5700K
Distribution Type Type II / Type III / Type V
Model
4000K
Luminous Flux (Photometered)
Packaging Dimensions
FL-SL-60W-A FL-SL-80W-A FL-SL-60W-A FL-SL-80W-A
13000 lm
FL-SL-100W-A FL-SL-100W-A
A series street light specification
2 www.free-life.it
Total Harmonic Distortion < 20%
Electrical Characteristics (Luminaire)
Power Consumption 60W Typical
Nominal Voltage 230VAC
Voltage Range 90 – 305VAC
Frequency Range 47 – 63Hz
Power Factor >0.95 /230VAC
Environmental
IP Rating IP66
Impact Rating IK09
Salt Spray Tested Yes
Operating Temp. Range
Thermal Management TypeNatural air cooling
Expected Lifespan 50,000 Hours to 70% Brightness
Material Composition (Body)
ADC-12 Aluminium Alloy (<0.1% copper content)
Material Composition (Optics)
10 – 14mm
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
FCC Part 15 Subpart B
Industry Canada ICES-005 Interference - Causing Equipment Standard, Issue 4 Lighting Equipment, Dec 2015
ANSI C63.4-2014 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9kHz to 40 GHz
Warranty
Warranty 5 years extended warranty optional
Dimming Function 1 - 10V Continuous / PWM
DALI Optional
Post-top position, Side-entry position
-30° ~ 122°F (-30° ~ 50°C)
Operating Humidity 15 - 90%
En55015
CONTROLS & ACCESSORIES
A series street light specification
Mounting OptionsSlip fitter (60mm)
Other diameters optional
Standard
Surge Protection 10kA surge protection
Intelligent Controls Dimming Function Daylight Sensor
Photocell Integration
Compliance (EMC)
AS/NZS CISPR15
Compliance (Safety Standards)
AS/NZS60598.1,IEC60598-1:2014 Luminaires - General Requirements and Tests
UL 8750 Standard for Light Emitting Diode (LED) Equipment for use in Lighting Products
CSA C22.2 No. 250.13-14 Power Supplies with Extra-Low-Voltage Class 2 Outputs
IEC 60598-1:2014
< 20%
80W Typical
230VAC
90 – 305VAC
47 – 63Hz
>0.95 /230VAC
Mounting/Bracket Type
Cable Gland
Extra clear tempered glass protect
Material Composition (Cover)
Polycarbonate
Cable Ø Entry Range
Pg11
< 20%
100W Typical
230VAC
90 – 305VAC
47 – 63Hz
>0.95 /230VAC
Thermal Management Type
DIMENSIONS
22.21 in (564.2 mm)
10.22 in (259.7 mm)
3.74 in (95 mm)
7.64 in (194 mm)Horizontal
10.73 in (272.5 mm)Vertical
Length:
Width:
Height:
Height (w/photocell):
Height (w/photocell):
60/76 optional
3 www.free-life.it
MOUNTING OPTIONS
The Mars fixture includes simple installation with convenient adjustability.The Mars fixture can be mounted horizontally or vertically with our universal slip fit system. Simply detach and rotate the slip fitter 180°
to achieve the vertical orientation. Both orientation options include the ability to rotate 15° or more.
Horizontal (rotates ±15º)
MOUNTING Post-top positionVertical (rotates ±15º)
MOUNTING Side-entry position
A series street light specification
PHOTOMETRIC OPTIONS
4 www.free-life.it
A series street light specification
The standard 100-277v fixture comes equipped with 10kA surge protection already integrated.
SPD1 surge protection devices is perfectly adapted for outdoor lighting to provide single phase protection for line/neutral, line/ground and neutral/ground in accordance with IEEEE C62.41 2002 C High,UL1449 and IEC61643-11
The Street Light Photocell integration controls the illumination of the Marsfixture by detecting surrounding ambient light.
Photocell base comes pre-installed, twist lock cap included in package when shipped and ready to apply during assembly. Twist-Lock Photocell automatically turns lights On at Dusk and O ffat Dawn.
ACCESSORY: PHOTOCELL
The Mars tr et Ligh come fi er.S e t s standard with a 60mm slip tt
Op fi er mounts are available at 60mm, and 76mm diameters. tional slip tt
ACCESSORY: MOUNTING
MOUNTING SIZE
Mars Slip Fitter 60mm 60mm
Mars Slip Fitter 76mm 76mm120-277Volt Twist/Lock photocell
