+ All Categories
Home > Documents > martin gardner treasure hunt hexahexaflexagon cut...

martin gardner treasure hunt hexahexaflexagon cut...

Date post: 30-Oct-2020
Category:
Upload: others
View: 5 times
Download: 0 times
Share this document with a friend
1
martin gardner treasure hunt hexahexaflexagon cut out 1. Print this sheet 2. cut out the design 3. glue blank sides of strips together to make one strip as shown in diagram. both sides of the strip should now have printed faces. 4. to complete, use the hexahexaflexagon folding guide. FOLD & GLUE instructions: http://www.puzzles.com/hexaflexagon
Transcript
Page 1: martin gardner treasure hunt hexahexaflexagon cut outelogiodellamente.dmf.unicatt.it/2015/materiale/MG_hexahexaflexagon.pdfmartin gardner treasure hunt hexahexaflexagon cut out 1.

martin gardnertreasure hunthexahexaflexagoncut out

1. Print this sheet2. cut out the design3. glue blank sides of strips together to make one strip as shown in diagram. both sides of the strip should now have printed faces.

4. to complete, use the hexahexaflexagon folding guide.

FOLD&

GLUE

instructions:

http://www.puzzles.com/hexa�exagon

Recommended