+ All Categories
Home > Documents > Master Clock Programmable Relays For Tone Generator - V1 · Master Clock Programmable Relays for...

Master Clock Programmable Relays For Tone Generator - V1 · Master Clock Programmable Relays for...

Date post: 21-Apr-2020
Category:
Upload: others
View: 22 times
Download: 0 times
Share this document with a friend
2
Synchronized Clock Systems The Sapling Company, Inc. 1633 Republic Road, Huntingdon Valley, Pennsylvania 19006 U.S.A Phone: +1.215.322.6063 Fax: +1.215.322.8498 Web: www.sapling-inc.com Master Clock Programmable Relays for Tone Generator SMA Series Master Clock Normally Open Common Relay 1 30 29 Tone Generator Power Amplifier Power Typical Installation when only one tone is being generated
Transcript
Page 1: Master Clock Programmable Relays For Tone Generator - V1 · Master Clock Programmable Relays for Tone Generator Sapling Master Clock is offered with either 4, 8, or no programmable

S y n c h r o n i z e d C l o c k S y s t e m s

The Sapling Company, Inc.1633 Republic Road, Huntingdon Valley, Pennsylvania 19006 U.S.A

Phone: +1.215.322.6063 Fax: +1.215.322.8498 Web: www.sapling-inc.com

Master Clock Programmable Relays for Tone Generator

SMA Series Master Clock

Normally Open Common

Relay 1

30 29Tone

Generator Power

Amplifier Power

Typical Installation when only one tone is being generated

Page 2: Master Clock Programmable Relays For Tone Generator - V1 · Master Clock Programmable Relays for Tone Generator Sapling Master Clock is offered with either 4, 8, or no programmable

S y n c h r o n i z e d C l o c k S y s t e m s

The Sapling Company, Inc.1633 Republic Road, Huntingdon Valley, Pennsylvania 19006 U.S.A

Phone: +1.215.322.6063 Fax: +1.215.322.8498 Web: www.sapling-inc.com

Master Clock Programmable Relays for Tone Generator

Sapling Master Clock is offered with either 4, 8, or no programmable relays

Each programmable relay max load is up to 8 AMPS at 120VAC or 5 AMPS at 240VAC

If the current load is, or close to 5 AMPS (240VAC) or 8 AMPS (120VAC) it is better to distribute current consumption between more than one relay

If the load is greater than 5 AMPS (240VAC) or 8 AMPS (120VAC), use 2 relays or as needed

Drawings show a tone generator and amplifier. If a tone generator with a built-in amplifier is used, you do not need to purchase a separate amplifier as shown in the drawings. In this case, you can hook up the tone generator directly to the master clock

SMA Series Master Clock

Normally Open Common

Relay 1

30 29Tone

Generator Power

Amplifier Power

SMA Series Master Clock

Normally Open Common

Relay 2

33 32Tone

Generator Power

Amplifier Power

Typical Installation when more than one tone is being generated


Recommended