+ All Categories
Home > Documents > Master document Terminal Junction Box - pepperl-fuchs.com · 04-CLC5 7 Internal assembling...

Master document Terminal Junction Box - pepperl-fuchs.com · 04-CLC5 7 Internal assembling...

Date post: 16-Dec-2018
Category:
Upload: dodang
View: 226 times
Download: 0 times
Share this document with a friend
14
Terminal Junction Box PuF_Cover_TJB_FXL_SL_XL_Master Master document SLS1xx.T-Cxxxx Terminal Junction Box Gross weight (only enclosure!) Dimensions (WxHxD) Ingress protection (acc. EN 60529) Type Description Pepperl+Fuchs references depending on terminal type Voltage max. Current max. depending on CSA (see table on page 7) IP66 1,2kg 110 x 110 x 65mm II 1 G Ex ia IIC T6 Ga for Zone 0 in Gas atmosphere (Ex i) Marking depending on usage: (for further information, refer also to the manual) Material Stainless Steel 316L (1.4404) Neoprene electropolished Finish Gasket material (only enclosure!) II 2 G Ex e IIC T6 Gb for Zone 1 in Gas atmosphere (Ex e) II 2 D Ex tb IIIC T80°C Db for Zone 21 in Dust atmosphere -30°C +40°C (T6/T80°C: max. surface temp. Gas/Dust) +55°C (T5/T95°C: max. surface temp. Gas/Dust) Min. ambient temperature Max. ambient temperature SIRA 99 ATEX 3199 EC type-examination certificate II 1 G Ex ia IIC T5 Ga II 2 G Ex e IIC T5 Gb II 2 D Ex tb IIIC T95°C Db Document-No. Form: PuF_MASTER_04x of 1 Rev. Date Name none Sheet 04-CLC5 Date Norm Approved Drawn Scale BÜHL / BADEN Revision Cover sheet A Title SL1 Masterdrawing Terminal Junction Box 7 CONFIDENTIAL acc. to DIN ISO 16016 Tolerances acc. Format A3 DIN ISO 2768-cK File: 04CLC5A printed: 27.03.2013 13.09.12 DC.FU/SJ DC.CL 27.03.2013 DC.MKO This document contains safety-relevant information. It must not be altered without the authorization of the norm expert! Only valid as long as released in EDM or with a valid production documentation! 1 2 3 4 5 6 7 8
Transcript

Terminal Junction BoxPuF_Cover_TJB_FXL_SL_XL_Master

Master document

SLS1xx.T-Cxxxx

Terminal Junction Box

Gross weight (only enclosure!)

Dimensions (WxHxD)

Ingress protection (acc. EN 60529)

Type

Description

Pepperl+Fuchs references

depending on terminal typeVoltage max.

Current max. depending on CSA(see table on page 7)

IP66

1,2kg

110 x 110 x 65mm

II 1 G Ex ia IIC T6 Gafor Zone 0 in Gas atmosphere (Ex i)

Marking depending on usage:

(for further information, refer also to the manual)

Material Stainless Steel 316L (1.4404)

Neoprene

electropolishedFinish

Gasket material (only enclosure!)

II 2 G Ex e IIC T6 Gbfor Zone 1 in Gas atmosphere (Ex e)

II 2 D Ex tb IIIC T80°C Dbfor Zone 21 in Dust atmosphere

-30°C

+40°C (T6/T80°C: max. surface temp. Gas/Dust)

+55°C (T5/T95°C: max. surface temp. Gas/Dust)

Min. ambient temperature

Max. ambient temperature

SIRA 99 ATEX 3199EC type-examination certificate

II 1 G Ex ia IIC T5 Ga

II 2 G Ex e IIC T5 Gb

II 2 D Ex tb IIIC T95°C Db

Document-No.

Form: PuF_MASTER_04x of1Rev. Date Name

none

Sheet

04-CLC5

Date

Norm

Approved

Drawn

Scale

BÜHL / BADEN

RevisionCover sheetA

Title SL1 Masterdrawing Terminal Junction Box

7

CONFIDENTIAL

acc. to DIN ISO 16016

Tolerances acc. Format

A3DIN ISO 2768-cK

File: 04CLC5A printed: 27.03.201313.09.12 DC.FU/SJ

DC.CL

27.03.2013

DC.MKO

This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!

Only valid as long as released in EDM or with a valid production documentation!

1 2 3 4 5 6 7 8

Index - Technical documentation

Cover sheet1 27.03.201304-CLC5 AIndex sheet2 27.03.201304-CLC5 ABoM with certifications (ATEX)3 27.03.201304-CLC5 ABoM with torques4 27.03.201304-CLC5 ADimensions, cable entries and labelling5 27.03.201304-CLC5 A

Maximum entry capacity6 27.03.201304-CLC5 AInternal assembling7 27.03.201304-CLC5 A

Date IDX DateDocument Sheet Description IDX DateIDX DateIDX Date

RevisionP

uF_S

TD

_IN

DE

X_S

HE

ET

Document-No.

Form: PuF_MASTER_04x of2Rev. Date Name

none

Sheet

04-CLC5

Date

Norm

Approved

Drawn

Scale

BÜHL / BADEN

RevisionIndex sheetA

Title SL1 Masterdrawing Terminal Junction Box

7

CONFIDENTIAL

acc. to DIN ISO 16016

Tolerances acc. Format

A3DIN ISO 2768-cK

File: 04CLC5A printed: 27.03.201313.09.12 DC.FU/SJ

DC.CL

27.03.2013

DC.MKO

This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!

Only valid as long as released in EDM or with a valid production documentation!

1 2 3 4 5 6 7 8

BoM with certificationsPos

PuF

_MA

ST

ER

_BoM

_AT

EX

_Cer

t

1 Ex-e Stainless steel enclosure SLSxx SLSxx PEPPERL+FUCHS SS 316L -40 85 IP66 II 1 G / II 2 G / II 2 D SIRA00 ATEX 3027U0,1,2,21,22 Ex e IIC, Ex tb IIIC

2 Ex-e-plastic cable gland bk M12 to M50 ESKE-e M12-M50 PA WISKA PA -40 75 IP66/68 II 2 G / II 2 D PTB 05 ATEX 1068X1,2,21,22 Ex e II, Ex tD

3 Ex-i-plastic cable gland bu M12 to M50 ESKE-i M12-M50 PA WISKA PA -40 75 IP66/68 II 2 G / II 2 D PTB 05 ATEX 1068X1,2,21,22 Ex e II, Ex tD

4 Ex e Stop end M12-M50 EX-EVSG M12-M50 PA WISKA PA -40 75 IP66/68 II 2 G / II 2 D PTB 06 ATEX 1032X1,2,21,22 Ex e II, Ex tD

5 Ex-e/d Metal cable gland ADE1F M12 to M50 ADE1F M12-M50 nickel plated CAPRI CUZN/Ni -30 80 IP66/68 II 2 G / II 2 D LCIE97 ATEX6008X1,2,21,22 Ex e II, Ex d IIC, Ex tD

6 Ex-e/d Metal cable gland ADE1F M12 to M50 ADE1F M12-M50 SS CAPRI SS 316L -30 80 IP66/68 II 2 G / II 2 D LCIE97 ATEX6008X1,2,21,22 Ex e II, Ex d IIC, Ex tD

7 Ex-e/d Metal cable gland ADE4F M12 to M50 ADE4F M12-M50 nickel plated CAPRI CUZN/Ni -30 80 IP66/68 II 2 G / II 2 D LCIE97 ATEX6008X1,2,21,22 Ex e II, Ex d IIC, Ex tD

8 Ex-e/d Metal cable gland ADE4F M12 to M50 ADE4F M12-M50 SS CAPRI SS 316L -30 80 IP66/68 II 2 G / II 2 D LCIE97 ATEX6008X1,2,21,22 Ex e II, Ex d IIC, Ex tD

9 Ex-e/d Metal stop end M16-M50(Mushroom) EX-PM01-06 CUZN/Ni PEPPERL+FUCHS CUZN/Ni -60 160 IP66 II 2 G / II 2 D SIRA 04 ATEX 1365 U1,2,21,22 Ex e IIC, Ex d IIC, Ex tb IIIC

10 Ex-e/d Metal stop end M16-M50(Hex head) EX-PH01-06 CUZN/Ni PEPPERL+FUCHS CUZN/Ni -60 160 IP66 II 2 G / II 2 D SIRA 04 ATEX 1365 U1,2,21,22 Ex e IIC, Ex d IIC, Ex tb IIIC

11 Ex-e/d Metal stop end M16-M50(Mushroom) EX-PM01-06 SS316L PEPPERL+FUCHS SS 316L -60 160 IP66 II 2 G / II 2 D SIRA 04 ATEX 1365 U1,2,21,22 Ex e IIC, Ex d IIC, Ex tb IIIC

12 Ex-e/d Metal stop end M16-M50(Hex head) EX-PH01-06 SS316L PEPPERL+FUCHS SS 316L -60 160 IP66 II 2 G / II 2 D SIRA 04 ATEX 1365 U1,2,21,22 Ex e IIC, Ex d IIC, Ex tb IIIC

13 Ex-e-Mini-Feed through terminal AKZ2,5 AKZ2,5 WEIDMUELLER 176V -50 120 II 2 G / II 2 D SIRA02 ATEX 3001U15 Ex e II

14 Ex-e-Mini-Feed through terminal AKZ2,5BL AKZ2,5BL WEIDMUELLER 176V -50 120 II 2 G / II 2 D SIRA02 ATEX 3001U15 Ex e II

15 Ex-e terminal MBK2,5/E MBK2,5/E PHOENIX CONTACT 176V -60 110 II 2 G / II 2 D KEMA03 ATEX 2380U22 Ex e II

16 Ex-e terminal MBK2,5/E BU MBK2,5/E BU PHOENIX CONTACT 176V -60 110 II 2 G / II 2 D KEMA03 ATEX 2380U22 Ex e II

17 Ex-e-Mini-PE terminal AKE2,5 AKE2,5 WEIDMUELLER -50 120 II 2 G / II 2 D SIRA02 ATEX 3001UN.A. Ex e II

18 Ex-e PE terminal MBK2,5/E-PE MBK2,5/E-PE PHOENIX CONTACT -60 110 II 2 G / II 2 D KEMA03 ATEX 2380UN.A. Ex e II

Approval-No.Component name Type Manufacturer Mat. IPGrade

ZoneTmin(°C)

Tmax(°C)

Imax(A)

Umax(V)

Type ofprotection

Group,category

Document-No.

Form: PuF_MASTER_04x of3Rev. Date Name

none

Sheet

04-CLC5

Date

Norm

Approved

Drawn

Scale

BÜHL / BADEN

RevisionBoM with certifications (ATEX)A

Title SL1 Masterdrawing Terminal Junction Box

7

CONFIDENTIAL

acc. to DIN ISO 16016

Tolerances acc. Format

A3DIN ISO 2768-cK

File: 04CLC5A printed: 27.03.201313.09.12 DC.FU/SJ

DC.CL

27.03.2013

DC.MKO

This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!

Only valid as long as released in EDM or with a valid production documentation!

1 2 3 4 5 6 7 8

M000 Ex-e Stainless steel enclosure SLSxx1 PEPPERL+FUCHSSLSxx1 00ENC-M001 2,0 N.A. N.A.

M001 Ex-e-plastic cable gland bk M12 to M501 WISKAESKE-e M12-M50 PA2 02GLD-M001 t.b.i. t.b.i. N.A.

M002 Ex-i-plastic cable gland bu M12 to M501 WISKAESKE-i M12-M50 PA3 02GLD-M002 t.b.i. t.b.i. N.A.

M003 Ex e Stop end M12-M501 WISKAEX-EVSG M12-M50 PA4 02GLD-M003 t.b.i. t.b.i. N.A.

M005 Ex-e/d Metal cable gland ADE1F M12 to M501 CAPRIADE1F M12-M50 nickel plated5 02GLD-M005 t.b.i. t.b.i. N.A.

M006 Ex-e/d Metal cable gland ADE1F M12 to M501 CAPRIADE1F M12-M50 SS6 02GLD-M006 t.b.i. t.b.i. N.A.

M007 Ex-e/d Metal cable gland ADE4F M12 to M501 CAPRIADE4F M12-M50 nickel plated7 02GLD-M007 t.b.i. t.b.i. N.A.

M008 Ex-e/d Metal cable gland ADE4F M12 to M501 CAPRIADE4F M12-M50 SS8 02GLD-M008 t.b.i. t.b.i. N.A.

M010 Ex-e/d Metal stop end M16-M50(Mushroom)1 PEPPERL+FUCHSEX-PM01-06 CUZN/Ni9 02GLD-M010 t.b.i. t.b.i. N.A.

M011 Ex-e/d Metal stop end M16-M50(Hex head)1 PEPPERL+FUCHSEX-PH01-06 CUZN/Ni10 02GLD-M011 t.b.i. t.b.i. N.A.

M015 Ex-e/d Metal stop end M16-M50(Mushroom)1 PEPPERL+FUCHSEX-PM01-06 SS316L11 02GLD-M015 t.b.i. t.b.i. N.A.

M016 Ex-e/d Metal stop end M16-M50(Hex head)1 PEPPERL+FUCHSEX-PH01-06 SS316L12 02GLD-M016 t.b.i. t.b.i. N.A.

M200 Ex-e-Mini-Feed through terminal AKZ2,51 WEIDMUELLERAKZ2,513 05TER-P920 0,4-0,6 N.A. N.A.

M201 Ex-e-Mini-Feed through terminal AKZ2,5BL1 WEIDMUELLERAKZ2,5BL14 05TER-P921 0,4-0,6 N.A. N.A.

M202 Ex-e terminal MBK2,5/E1 PHOENIX CONTACTMBK2,5/E15 05TER-P922 0,6-0,8 N.A. N.A.

M203 Ex-e terminal MBK2,5/E BU1 PHOENIX CONTACTMBK2,5/E BU16 05TER-P923 0,6-0,8 N.A. N.A.

M211 Ex-e-Mini-PE terminal AKE2,51 WEIDMUELLERAKE2,517 05TER-P924 0,4-0,6 0,4-0,6 N.A.

M212 Ex-e PE terminal MBK2,5/E-PE1 PHOENIX CONTACTMBK2,5/E-PE18 05TER-P925 0,6-0,8 N.A. N.A.

BoM with torques

PuF

_ST

D_B

oM_T

orq

Torque 1(Nm)

ItemPos Qu. Component namePart-No. ManufacturerType Torque 2(Nm)

Torque 3(Nm)

Special conditions

Document-No.

Form: PuF_MASTER_04x of4Rev. Date Name

1:2

Sheet

04-CLC5

Date

Norm

Approved

Drawn

Scale

BÜHL / BADEN

RevisionBoM with torquesA

Title SL1 Masterdrawing Terminal Junction Box

7

CONFIDENTIAL

acc. to DIN ISO 16016

Tolerances acc. Format

A3DIN ISO 2768-cK

File: 04CLC5A printed: 27.03.201313.09.12 DC.FU/SJ

DC.CL

27.03.2013

DC.MKO

This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!

Only valid as long as released in EDM or with a valid production documentation!

1 2 3 4 5 6 7 8

BOTTOM VIEW

SIDE VIEW RIGHT

M6 hexagon head screw

Mounting details

SIDE VIEW LEFT

View without lid!

Wall

mounting

bracket

Ex i label

Type label

TOP (A)

TOP VIEW

BOTTOM (B)

drilling grid

* Ex i label(if required)

Internal / external

earth stud M6 brass

* Tag label(if required)

RIGHT (D)

LEFT (C)

(if required)

* Tag label

* Ex i label Material:

Material:

engraved Traffolyte (blue surface, white letters); 60x30mm; selfadhesive, "CONTAINS INTRINSICALLY SAVE CIRCUITS"

engraved Traffolyte (white surface, black letters); 60x30mm; selfadhesive (optional screwed)laser engraved Stainless Steel; 60x30mm; screwedor:

Tag label

Document-No.

Form: PuF_MASTER_04x of5Rev. Date Name

1:2

Sheet

04-CLC5

Date

Norm

Approved

Drawn

Scale

BÜHL / BADEN

RevisionDimensions, cable entries and labellingA

Title SL1 Masterdrawing Terminal Junction Box

7

CONFIDENTIAL

acc. to DIN ISO 16016

Tolerances acc. Format

A3DIN ISO 2768-cK

File: 04CLC5A printed: 27.03.201313.09.12 DC.FU/SJ

DC.CL

27.03.2013

DC.MKO

This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!

Only valid as long as released in EDM or with a valid production documentation!

1 2 3 4 5 6 7 8

Document-No.

Form: PuF_MASTER_04x of6Rev. Date Name

none

Sheet

04-CLC5

Date

Norm

Approved

Drawn

Scale

BÜHL / BADEN

RevisionMaximum entry capacityA

Title SL1 Masterdrawing Terminal Junction Box

7

CONFIDENTIAL

acc. to DIN ISO 16016

Tolerances acc. Format

A3DIN ISO 2768-cK

File: 04CLC5A printed: 27.03.201313.09.12 DC.FU/SJ

DC.CL

27.03.2013

DC.MKO

This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!

Only valid as long as released in EDM or with a valid production documentation!

1 2 3 4 5 6 7 8

Rail identification &

terminal arrangement area

Assembled with 1 railAssembled with 1 rail

End stop

DIN rail identifier

H1DIN rail TS15

End stop

(opt. marker -Xn)

Terminal #1

Terminal #n

(with end plate!)

Document-No.

Form: PuF_MASTER_04x of7Rev. Date Name

1:2

Sheet

04-CLC5

Date

Norm

Approved

Drawn

Scale

BÜHL / BADEN

RevisionInternal assemblingA

Title SL1 Masterdrawing Terminal Junction Box

7

CONFIDENTIAL

acc. to DIN ISO 16016

Tolerances acc. Format

A3DIN ISO 2768-cK

File: 04CLC5A printed: 27.03.201313.09.12 DC.FU/SJ

DC.CL

27.03.2013

DC.MKO

This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!

Only valid as long as released in EDM or with a valid production documentation!

1 2 3 4 5 6 7 8

Index - Technical documentation

Index sheet appendix1 27.03.201304-CLC5 AAdd. manufacturing informations2 27.03.2013Dimensions and ex relevant distances04-CLC5 AAdd. manufacturing informations3 27.03.2013Dimensions and ex relevant distances04-CLC5 AAdd. manufacturing informations4 27.03.2013Drilling grid side A04-CLC5 AAdd. manufacturing informations5 27.03.2013Drilling grid side B04-CLC5 A

Add. manufacturing informations6 27.03.2013Drilling grid side C04-CLC5 AAdd. manufacturing informations7 27.03.2013Drilling grid side D04-CLC5 A

Date IDX DateDocument Sheet Description IDX DateIDX DateIDX Date

RevisionP

uF_S

TD

_IN

DE

X_S

HE

ET

_AP

PE

ND

IX

Document-No.

Form: PuF_MASTER_04x Rev. Date Name

none

Appendix

04-CLC5

Date

Norm

Approved

Drawn

Scale

BÜHL / BADEN

RevisionIndex sheet appendixA

Title SL1 Masterdrawing Terminal Junction Box

7

CONFIDENTIAL

acc. to DIN ISO 16016

Tolerances acc. Format

A3DIN ISO 2768-cK

File: 04CLC5A printed: 27.03.201313.09.12 DC.FU/SJ

DC.CL

27.03.2013

DC.MKO

This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!

Only valid as long as released in EDM or with a valid production documentation!

of1

1 2 3 4 5 6 7 8

Rail identification &

terminal arrangement area

Assembled with 1 rail

Labelling

Ex i label

(if required)

Note:

For final Terminal Junction Box and detailed entry location layoutplease refer also to the corresponding CRD-File!

Type label

Ex i label

H1

SECTIONAL BOTTOM VIEW SECTIONAL LEFT SIDE VIEW

AKZ2,5

AKZ2,5

Ex - relevant dimensions are marked :

Drillings for fixing

Tag label (if required)

Tag label

assembling acc.

drawing no. T07-BE45_EN

Tag label

Document-No.

Form: PuF_MASTER_04x Rev. Date Name

1:2

Appendix

04-CLC5

Date

Norm

Approved

Drawn

Scale

BÜHL / BADEN

Revision

Dimensions and ex relevant distances

Add. manufacturing informationsA

Title SL1 Masterdrawing Terminal Junction Box

7

CONFIDENTIAL

acc. to DIN ISO 16016

Tolerances acc. Format

A3DIN ISO 2768-cK

File: 04CLC5A printed: 27.03.201313.09.12 DC.FU/SJ

DC.CL

27.03.2013

DC.MKO

This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!

Only valid as long as released in EDM or with a valid production documentation!

of2

1 2 3 4 5 6 7 8

Ex - relevant dimensions are marked :

Document-No.

Form: PuF_MASTER_04x Rev. Date Name

none

Appendix

04-CLC5

Date

Norm

Approved

Drawn

Scale

BÜHL / BADEN

Revision

Dimensions and ex relevant distances

Add. manufacturing informationsA

Title SL1 Masterdrawing Terminal Junction Box

7

CONFIDENTIAL

acc. to DIN ISO 16016

Tolerances acc. Format

A3DIN ISO 2768-cK

File: 04CLC5A printed: 27.03.201313.09.12 DC.FU/SJ

DC.CL

27.03.2013

DC.MKO

This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!

Only valid as long as released in EDM or with a valid production documentation!

of3

1 2 3 4 5 6 7 8

Drilling grid side A

overview of drill sizes and minimum distances see document 07-BV46

clearance holes

(ø20

,2)

(ø16

,2)

(ø12

,2)

(ø12,2)

(ø20,2)

(ø16,2)

Document-No.

Form: PuF_MASTER_04x Rev. Date Name

1:1

Appendix

04-CLC5

Date

Norm

Approved

Drawn

Scale

BÜHL / BADEN

Revision

Drilling grid side A

Add. manufacturing informationsA

Title SL1 Masterdrawing Terminal Junction Box

7

CONFIDENTIAL

acc. to DIN ISO 16016

Tolerances acc. Format

A3DIN ISO 2768-cK

File: 04CLC5A printed: 27.03.201313.09.12 DC.FU/SJ

DC.CL

27.03.2013

DC.MKO

This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!

Only valid as long as released in EDM or with a valid production documentation!

of4

1 2 3 4 5 6 7 8

Drilling grid side B

overview of drill sizes and minimum distances see document 07-BV46

clearance holes

(ø20

,2)

(ø16

,2)

(ø12

,2)

(ø20,2)

(ø16,2)

(ø12,2)

Document-No.

Form: PuF_MASTER_04x Rev. Date Name

1:1

Appendix

04-CLC5

Date

Norm

Approved

Drawn

Scale

BÜHL / BADEN

Revision

Drilling grid side B

Add. manufacturing informationsA

Title SL1 Masterdrawing Terminal Junction Box

7

CONFIDENTIAL

acc. to DIN ISO 16016

Tolerances acc. Format

A3DIN ISO 2768-cK

File: 04CLC5A printed: 27.03.201313.09.12 DC.FU/SJ

DC.CL

27.03.2013

DC.MKO

This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!

Only valid as long as released in EDM or with a valid production documentation!

of5

1 2 3 4 5 6 7 8

Drilling grid side C

overview of drill sizes and minimum distances see document 07-BV46

clearance holes

(ø20

,2)

(ø16

,2)

(ø12

,2)

(ø12,2)

(ø20,2)

(ø16,2)

Document-No.

Form: PuF_MASTER_04x Rev. Date Name

1:1

Appendix

04-CLC5

Date

Norm

Approved

Drawn

Scale

BÜHL / BADEN

Revision

Drilling grid side C

Add. manufacturing informationsA

Title SL1 Masterdrawing Terminal Junction Box

7

CONFIDENTIAL

acc. to DIN ISO 16016

Tolerances acc. Format

A3DIN ISO 2768-cK

File: 04CLC5A printed: 27.03.201313.09.12 DC.FU/SJ

DC.CL

27.03.2013

DC.MKO

This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!

Only valid as long as released in EDM or with a valid production documentation!

of6

1 2 3 4 5 6 7 8

Drilling grid side D

overview of drill sizes and minimum distances see document 07-BV46

clearance holes

(ø20

,2)

(ø16

,2)

(ø12

,2)

(ø12,2)

(ø20,2)

(ø16,2)

Document-No.

Form: PuF_MASTER_04x Rev. Date Name

1:1

Appendix

04-CLC5

Date

Norm

Approved

Drawn

Scale

BÜHL / BADEN

Revision

Drilling grid side D

Add. manufacturing informationsA

Title SL1 Masterdrawing Terminal Junction Box

7

CONFIDENTIAL

acc. to DIN ISO 16016

Tolerances acc. Format

A3DIN ISO 2768-cK

File: 04CLC5A printed: 27.03.201313.09.12 DC.FU/SJ

DC.CL

27.03.2013

DC.MKO

This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!

Only valid as long as released in EDM or with a valid production documentation!

of7

1 2 3 4 5 6 7 8


Recommended