Masterfinish Catalogue c&l

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00

6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599

1

AustrAliA’s ultimAte

rAnge of ContrACtors

tools for ConCrete,

BriCk, reo, render &

PlAster trAdes

Tools & EquipmentCatalogue

www.master f inish.com.au

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


2 3

Tool Blade GuaGe

101B 120 x 356mm light



NoTe: Trowel 161a has tapered width

POINTED TROWEL

SQUARE TROWEL

COVING TROWEL

STEEL FLOATS VARIABLE MARGIN TOOL

EDGING TOOLS

VEE JOINTER

FIXED MARGIN TOOL

Handle a: used for trowelling concrete floors or similar work. The curve of the blade end allows for the reduction of blade end marking. The moulded plastic handle is designed for ease of grip and operator comfort.

Handle B: This traditional turned timber handle suits applications such as trowelling solvent based products that may attack plastic handles. (101B)

(191a)

“a” Handle Moulded Plastic

“B” HandleWood

used where the pointed end trowel is not suitable eg finishing stair toppings and kerb & gutter.

Tool Blade Guage

102a 280 x 120mm light

162a 280 x 120mm Heavy


Cement Rendering and plastering

PP73 365 x 120mm light

450S120 450 x 120mm light

500S120 500 x 120mm light

600S120 600 x 120mm light

350S150 350 x 150mm light

400S150 400 x 150mm light

used to form a cove where a wall and floor meet. The 201 coving has a traditional use in ‘rubbing up’ the setting concrete prior to steel trowelling. If the concrete is left with the finish created by the coving trowel ie a more textured finish than a steel trowelled finish, this is known as a coving finish or ‘stipple’ finish.

Tool RadIuS WIdTH HeIGHT

201 25 145mm 70mm

202 25 145mm 32mm

203 12 95mm 25mm

207 75 140mm 90mm

(102a)

W

H

Rad

(201)

Concr

ete

Flo

or

Finis

hin

g T

row

els

Concre

te Flo

or Fin

ishin

g Tro

wels

used to ‘rub up’ a concrete floor prior to steel trowelling or to work in coloured dry shake. They produce a textured finish smoother than a wood float, which suits outdoor paving applications. The trowels feature a long wearing robust steel blade that is turned up all round.

(209) 160 X 210stainless steel blade

(219) 150 x 380

(229) 290 X 100

(302)

Tool Width depth

301 75 10

304 75 19

305 75 25

306 75 32

302 150 12

312 150 20

315 150 25

used to form ‘dummy’ joints in concrete paving. The joint in the concrete reduces the thickness of the paving and if cracking occurs, the crack should be at the line of the ‘dummy’ joint. The depth of the ‘dummy’ joint should be 1/5 of the slab thickness.

The tools are formed from long wearing steel and have robust, comfortable handles.

Tool 777

Grooving bit adjusts to desired width of margin between 70-160mm

WidthMargin

Tool WIdTH MaRGIN

775 140 100

776 140 150

777 120 70 to 160

used to trowel a smooth finish to slab edges and produce a smooth face margin to textured or wood float finish external paving. The range encompasses a variety of edge radii and blade widths to suit an extensive range of applications.The blades are formed from steel.

Stainless steel is used on Tool Nos. 401S 402S and 403S and 700 through to 708.

Tool Radius Width length depth

401 5 75 140 12

402 6 75 140 12

403 10 75 140 19

404 5 38 140 12

405 5 50 140 12

406 6 100 150 14

406F 10 75 140 40

408 19 80 140 19

410 10 145 230 14

Stainless Steel

401S 5 75 140 12

402S 6 75 140 12

403S 10 75 140 19

large Size for Kerb and Gutter Work etc.

700 12 150 230 24

701 25 150 230 24

702 12 112 175 22

703 25 112 175 19

706 10 105 150 14

708 20 140 200 19

709 25 220 200 25

d(304)

W

MAGNESIUM BLADE FLOATS

used to produce a textured finish smoother than wood float. a robust and long wearing tool with a slightly curved or broken in blade.

Tool Size

CF012PF 300 x 80mm

CF016PF 405 x 80mm

CF020PF 510 x 80mm

Tool 776

(708)

Radius

d

Wl

(406)

Tool Blade Gauge





Tool Blade Gauge





(CF012PF)

See Kraft section of this catalogue for full range. (pg22)

See page 8 for Walking Jointers.

See page 8 for new Walking edgers.

TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.auTelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


2 3

Tool Blade GuaGe




NoTe: Trowel 161a has tapered width

POINTED TROWEL

SQUARE TROWEL

COVING TROWEL

STEEL FLOATS VARIABLE MARGIN TOOL

EDGING TOOLS

VEE JOINTER

FIXED MARGIN TOOL

Handle a: used for trowelling concrete floors or similar work. The curve of the blade end allows for the reduction of blade end marking. The moulded plastic handle is designed for ease of grip and operator comfort.

Handle B: This traditional turned timber handle suits applications such as trowelling solvent based products that may attack plastic handles. (101B)

(191a)

“a” Handle Moulded Plastic

“B” HandleWood

used where the pointed end trowel is not suitable eg finishing stair toppings and kerb & gutter.

Tool Blade Guage




Cement Rendering and plastering

PP73 365 x 120mm light

450S120 450 x 120mm light

500S120 500 x 120mm light

600S120 600 x 120mm light

350S150 350 x 150mm light

400S150 400 x 150mm light

used to form a cove where a wall and floor meet. The 201 coving has a traditional use in ‘rubbing up’ the setting concrete prior to steel trowelling. If the concrete is left with the finish created by the coving trowel ie a more textured finish than a steel trowelled finish, this is known as a coving finish or ‘stipple’ finish.

Tool RadIuS WIdTH HeIGHT

201 25 145mm 70mm

202 25 145mm 32mm

203 12 95mm 25mm

207 75 140mm 90mm

(102a)

W

H

Rad

(201)

Concr

ete

Flo

or

Finis

hin

g T

row

els

Concre

te Flo

or Fin

ishin

g Tro

wels

used to ‘rub up’ a concrete floor prior to steel trowelling or to work in coloured dry shake. They produce a textured finish smoother than a wood float, which suits outdoor paving applications. The trowels feature a long wearing robust steel blade that is turned up all round.

(209) 160 X 210stainless steel blade

(219) 150 x 380

(229) 290 X 100

(302)

Tool Width depth

301 75 10

304 75 19

305 75 25

306 75 32

302 150 12

312 150 20

315 150 25

used to form ‘dummy’ joints in concrete paving. The joint in the concrete reduces the thickness of the paving and if cracking occurs, the crack should be at the line of the ‘dummy’ joint. The depth of the ‘dummy’ joint should be 1/5 of the slab thickness.

The tools are formed from long wearing steel and have robust, comfortable handles.

Tool 777

Grooving bit adjusts to desired width of margin between 70-160mm

WidthMargin

Tool WIdTH MaRGIN

775 140 100

776 140 150

777 120 70 to 160

used to trowel a smooth finish to slab edges and produce a smooth face margin to textured or wood float finish external paving. The range encompasses a variety of edge radii and blade widths to suit an extensive range of applications.The blades are formed from steel.

Stainless steel is used on Tool Nos. 401S 402S and 403S and 700 through to 708.

Tool Radius Width length depth

401 5 75 140 12

402 6 75 140 12

403 10 75 140 19

404 5 38 140 12

405 5 50 140 12

406 6 100 150 14

406F 10 75 140 40

408 19 80 140 19

410 10 145 230 14

Stainless Steel

401S 5 75 140 12

402S 6 75 140 12

403S 10 75 140 19

large Size for Kerb and Gutter Work etc.

700 12 150 230 24

701 25 150 230 24

702 12 112 175 22

703 25 112 175 19

706 10 105 150 14

708 20 140 200 19

709 25 220 200 25

d(304)

W

MAGNESIUM BLADE FLOATS

used to produce a textured finish smoother than wood float. a robust and long wearing tool with a slightly curved or broken in blade.

Tool Size

CF012PF 300 x 80mm

CF016PF 405 x 80mm

CF020PF 510 x 80mm

Tool 776

(708)

Radius

d

Wl

(406)

Tool Blade Gauge





Tool Blade Gauge





(CF012PF)

See Kraft section of this catalogue for full range. (pg22)

See page 8 for Walking Jointers.

See page 8 for new Walking edgers.


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


4 5

Tool Size

801 112 x 300

802 112 x 380

803 112 x 450

804 50 x 450

824 65 x 600

Tool Size

1038 300sq.

1039 330sq.

1040 400sq.

Tool length

SP18 450

SP24 600

SP30 750

Tool Type Size

1030 external 33 x 33


1033 Internal 28 x 28

WOOD FLOATS

FORMWORK SUPPORT

WOOD FLOATS

STEP RISER

STEEL MARBLE SHEEN TROWEL

FLEXIBLE CUTTER

PLASTERER’S SQUARE

STEP NOSING

EDGING TOOLS NOSE AND CORNER TOOL

NON-SLIP GROOVE FORMING TOOLS FOR STEPS AND RAMPS

PLASTIC MARBLE SHEEN FLOAT

PLASTERER’S HAWK

Wood F

loats

& P

last

er

Tools

Pool, K

erb

& R

ebate

TelePHoNe: (02) 9637 9011 • FaX: (02) 9682 1269 • eMaIl: [email protected] • WeB: www.masterfinish.com.au

(801)

(824)

The floats feature a long wearing hardwood face and a lightweight, but tough, orange plastic handle that is adhered to the timber to eliminate marking from screw fixing.

The step nosing tools are made from stainless steel and also have application in forming external corners on cement render.

(903)

(905)

Tools No.s 901 and 903 form semi-circular corrugations at 9 mm centres.

Tools No.s 904 & 905 form an 8mm x 16mm recess that is filled with non slip grit.

The step riser tool is formed from steel. The angle is set to produce a 20 mm undercut on a 150 mm riser.

(1035)

used in conjunction with a straight edge to scrape a corner and can be locked at the desired angle and depth

Plasterers hawks are made with a light but tough aluminium plate, a screw in plastic handle and a sponge hand cushion.

Plasterers internal and external corner tools have a stainless steel blade formed to the traditional pencil round.

(1023)

Plasterers edging tools have a stainless steel blade and are formed to cut a sharp edging around steel door jams or similar situations

(1033)

(1030)

Tool Radius

501 6

502 10

Tool No. Size mm

120a 300

121a 350

122a 450

122S 450 with 330 Rib

122SS 122S with Square Back

126a 555

126S 555 with 380 Rib


Tool No. of Grooves Groove Size

901 3 -

903 5 -

904 1 16 x 6

905 2 at 19mm apart 16 x 6

Tool Radius

601 6

Ste

p a

nd R

am

p T

ools

Pla

stere

r’s

Tools

(1020)

originally developed for use on marble sheen finishing in swimming pools, the blade is allowed to flex with only a short support rib (see tools Nos. 120a, 121a, 122a & 126a).

a further development from this is a similar trowel with a longer rib for greater rigidity in the blade (see ‘S’ series). The blade is made from a flexible spring steel and the tool

is used to cut and scrape spraycrete to desired shape in swimming pools and similar applications.

(122S)

(122SS)

(125)

(127)

The blade is made from 3 mm thick low-density white polyethelene and is fixed to a light weight plastic handle. originally developed to trowel marble sheen in swimming pools, but now finds a wider use on various wall applications.

KGT – The steel blade is shaped to finish 150 mm kerb with a 38 mm splay and give a 25 mm radius to the kerb nosing and gutter coving.

KGC – The steel blade is shaped to finish the coving in kerb and gutter with 25 mm radius.

KGe – The steel blade is shaped to finish the nose of the kerb with a 25 radius.

KGCT – The steel blade is shaped to finish a gutter crossing with a 40 mm lip.

KGB - Kerb Bow formed from 30 mm x 10 mm steel bar and shaped to form up 150 mm splayed kerb using 50 mm thick timber.

KGP 2 – Kerb Plate cut to shape from steel plate to form 150 mm kerb and used in construction with kerb bow. If 150 mm straight kerb is required, the plate can be placed to form it.

150

150

RFB-50 - Slab edge Rebate Form Bracket

Manufactured to make the task of forming the 150 mm brickwork rebate on house floor slabs with ease.

Suitable for use with 50 mm timber formwork.

STeel PeGS

Machined from a tough 30 mm diameter steel bar and drilled with 5 mm diameter holes, staggered at 90º to allow nail fixing of timber formwork.

(RFB-50)

(RFBa35)

RFBa35 - adjustable Bracket

Bracket is adjustable to suit 35mm to 50mm timber. (Preset at 35mm)

(120a)


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


4 5

Tool Size

801 112 x 300

802 112 x 380

803 112 x 450

804 50 x 450

824 65 x 600

Tool Size

1038 300sq.

1039 330sq.

1040 400sq.

Tool length

SP18 450

SP24 600

SP30 750

Tool Type Size



1033 Internal 28 x 28

WOOD FLOATS

FORMWORK SUPPORT

WOOD FLOATS

STEP RISER

STEEL MARBLE SHEEN TROWEL

FLEXIBLE CUTTER

PLASTERER’S SQUARE

STEP NOSING

EDGING TOOLS NOSE AND CORNER TOOL

NON-SLIP GROOVE FORMING TOOLS FOR STEPS AND RAMPS

PLASTIC MARBLE SHEEN FLOAT

PLASTERER’S HAWK

Wood F

loats

& P

last

er

Tools

Pool, K

erb

& R

ebate


(801)

(824)

The floats feature a long wearing hardwood face and a lightweight, but tough, orange plastic handle that is adhered to the timber to eliminate marking from screw fixing.

The step nosing tools are made from stainless steel and also have application in forming external corners on cement render.

(903)

(905)

Tools No.s 901 and 903 form semi-circular corrugations at 9 mm centres.

Tools No.s 904 & 905 form an 8mm x 16mm recess that is filled with non slip grit.

The step riser tool is formed from steel. The angle is set to produce a 20 mm undercut on a 150 mm riser.

(1035)

used in conjunction with a straight edge to scrape a corner and can be locked at the desired angle and depth

Plasterers hawks are made with a light but tough aluminium plate, a screw in plastic handle and a sponge hand cushion.

Plasterers internal and external corner tools have a stainless steel blade formed to the traditional pencil round.

(1023)

Plasterers edging tools have a stainless steel blade and are formed to cut a sharp edging around steel door jams or similar situations

(1033)

(1030)

Tool Radius

501 6

502 10

Tool No. Size mm

120a 300

121a 350

122a 450

122S 450 with 330 Rib


126a 555

126S 555 with 380 Rib


Tool No. of Grooves Groove Size

901 3 -

903 5 -

904 1 16 x 6

905 2 at 19mm apart 16 x 6

Tool Radius

601 6

Ste

p a

nd R

am

p T

ools

Pla

stere

r’s

Tools

(1020)

originally developed for use on marble sheen finishing in swimming pools, the blade is allowed to flex with only a short support rib (see tools Nos. 120a, 121a, 122a & 126a).

a further development from this is a similar trowel with a longer rib for greater rigidity in the blade (see ‘S’ series). The blade is made from a flexible spring steel and the tool

is used to cut and scrape spraycrete to desired shape in swimming pools and similar applications.

(122S)

(122SS)

(125)

(127)

The blade is made from 3 mm thick low-density white polyethelene and is fixed to a light weight plastic handle. originally developed to trowel marble sheen in swimming pools, but now finds a wider use on various wall applications.

KGT – The steel blade is shaped to finish 150 mm kerb with a 38 mm splay and give a 25 mm radius to the kerb nosing and gutter coving.

KGC – The steel blade is shaped to finish the coving in kerb and gutter with 25 mm radius.

KGe – The steel blade is shaped to finish the nose of the kerb with a 25 radius.

KGCT – The steel blade is shaped to finish a gutter crossing with a 40 mm lip.

KGB - Kerb Bow formed from 30 mm x 10 mm steel bar and shaped to form up 150 mm splayed kerb using 50 mm thick timber.

KGP 2 – Kerb Plate cut to shape from steel plate to form 150 mm kerb and used in construction with kerb bow. If 150 mm straight kerb is required, the plate can be placed to form it.

150

150

RFB-50 - Slab edge Rebate Form Bracket

Manufactured to make the task of forming the 150 mm brickwork rebate on house floor slabs with ease.

Suitable for use with 50 mm timber formwork.

STeel PeGS

Machined from a tough 30 mm diameter steel bar and drilled with 5 mm diameter holes, staggered at 90º to allow nail fixing of timber formwork.

(RFB-50)

(RFBa35)

RFBa35 - adjustable Bracket

Bracket is adjustable to suit 35mm to 50mm timber. (Preset at 35mm)

(120a)


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


6 7Please note that all the tools on this page are used in conjunction with the Master Finish telescopic handles or use the 588 clip together handle.

FIXED POSITION HANDLE SCREEDS WALKING TROWEL

FRESNO TROWELS

ALUMINIUM BULLFLOATS

FINISHING BROOMS

LIGHT WEIGHT ALUMINIUM STRAIGHT EDGE

VARIABLE POSITION CLAMPED HANDLE SCREED - AvAilABle with level viAl

Conc

rete

Scr

eeds

& S

trai

ght

Edg

es

Concre

te S

lab Fin

ishin

g

Tool length (mm)

F12 1200

F15 1500

F18 1800

F21 2100

F24 2400

F27 2700

F30 3000

F36 3600

Tool No. length (mm)

1062 600

1063 900

1064 1200

1065 1500

1068 1800

Tool length Features

444 440 Round ends

555 600 Round ends

556 600 one Square end

Stainless Steel

557 600 Round ends


length (mm) Clamp ToolClamp with

level Vial

1200 C12 C12l

1500 C15 C15l

1800 C18 C18l

2100 C21 C21l

2400 C24 C24l

2700 C27 C27l

3000 C30 C30l

3600 C36 C36l

4200* C42 C42l

4500* C45 C45l

4800* C48 C48l

length Powder Coated Mill Finish

(mm) (White) (plain)

1200 P12 P12P

1500 P15 P15P

1800 P18 P18P

2100 P21 P21P

2400 P24 P24P

2700 P27 P27P

3000 P30 P30P

3600 P36 P36P

‘Clamp on’ style handle, which may be reversed to the working face for second use. Fitted with end plugs and powder coated for ease of clean up.

light weight accurate straight edge – measures 70 x 19. uses include ruling cement render, tiling and as a general construction straight edge. Fitted with end plugs and powder coated for ease of clean up, or in mill finish.

ClaMP HaNdle SCReed WITH adJuSTaBle leVel VIal

PATENTED LEVEL VIAL (ADJUSTABLE)

ClaMP HaNdle SCReed

MIll FINISH

PoWdeR CoaTed FINISH

* Size 4200 to 4800 may not be sufficiently

rigid for close tolerance work.

Traditional 50 x 36 aluminium box section with one radius and one sharp cutting edge. The handle fixes to the top of the screed. Fitted with end plugs and powder coated for ease of clean up.

Trowel concrete floors from a standing position. The tubular connection pivots freely to allow the changing angle between the blade and handle to occur.

The square end blade allows trowelling up against a wall.

used in conjunction with telescopic handle 1076 or clip handle 588.

(555)

(556)

TOOL: 606 – 600mm BladeThe illustration shows the standard fitting which can be locked at the desired angle. With this fitting the Fresno may also be used as a walking trowel by locking the fitting parallel to the blade.

TOOL: 607 – 600mm BladeThe Fresno may be fitted with a bracket and tilt mechanism as illustrated – used only in a push/pull operation.

TOOL: 609 -900mmBladea larger version of Tool No. 607.

(1063)

Features· long wearing aluminium alloy blade· low maintenance· Radius on blade corners reduces end marking· Gives concrete a smoother wet finish· Makes final finish easier

BLADE OPERATION:The tilt of the blade is adjustable and controlled by twisting the handle. This enables the operator to change the tilt of the blade (continuously if required) to achieve the optimum finish to the concrete. If the blade lies flat on the slab it leaves a rough finish but will close and fill holes. When the blade is tilted on an angle, a smoother finish will result. There is no need to raise or lower the handle, simply twist it for best results.

HaIR aNd FIBRe BRISTle TIMBeR SToCKThe brooms use a quality hair and fibre bristle.

Tool leNGTH (mm)

1572 600

1573 750

1574 900

(1974)

(1574)

Tool Colour Brush Texture length mm

1974 Black standard/fine 900

1974 Blue medium 900

1974 Green coarse 900

1904 Black standard/fine 900 replacement

(606)

(607)

New MeCHaN

ISM

New MeCHaN

ISM

New MeCHaN

ISM

NYloN BRISTle aluMINIuM SToCKFitted with 360 degree adjustable bracket

(Reg design No.123595)Replacement brush Tool No.1904

Medium Brush Texture

Standard/FineBrush Texture Coarse

Brush Texture


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


6 7Please note that all the tools on this page are used in conjunction with the Master Finish telescopic handles or use the 588 clip together handle.

FIXED POSITION HANDLE SCREEDS WALKING TROWEL

FRESNO TROWELS

ALUMINIUM BULLFLOATS

FINISHING BROOMS

LIGHT WEIGHT ALUMINIUM STRAIGHT EDGE

VARIABLE POSITION CLAMPED HANDLE SCREED - AvAilABle with level viAl

Conc

rete

Scr

eeds

& S

trai

ght

Edg

es

Concre

te S

lab Fin

ishin

g

Tool length (mm)

F12 1200

F15 1500

F18 1800

F21 2100

F24 2400

F27 2700

F30 3000

F36 3600

Tool No. length (mm)

1062 600

1063 900

1064 1200

1065 1500

1068 1800

Tool length Features

444 440 Round ends

555 600 Round ends


Stainless Steel

557 600 Round ends


length (mm) Clamp ToolClamp with

level Vial

1200 C12 C12l

1500 C15 C15l

1800 C18 C18l

2100 C21 C21l

2400 C24 C24l

2700 C27 C27l

3000 C30 C30l

3600 C36 C36l

4200* C42 C42l

4500* C45 C45l

4800* C48 C48l

length Powder Coated Mill Finish

(mm) (White) (plain)

1200 P12 P12P

1500 P15 P15P

1800 P18 P18P

2100 P21 P21P

2400 P24 P24P

2700 P27 P27P

3000 P30 P30P

3600 P36 P36P

‘Clamp on’ style handle, which may be reversed to the working face for second use. Fitted with end plugs and powder coated for ease of clean up.

light weight accurate straight edge – measures 70 x 19. uses include ruling cement render, tiling and as a general construction straight edge. Fitted with end plugs and powder coated for ease of clean up, or in mill finish.

ClaMP HaNdle SCReed WITH adJuSTaBle leVel VIal

PATENTED LEVEL VIAL (ADJUSTABLE)

ClaMP HaNdle SCReed

MIll FINISH

PoWdeR CoaTed FINISH

* Size 4200 to 4800 may not be sufficiently

rigid for close tolerance work.

Traditional 50 x 36 aluminium box section with one radius and one sharp cutting edge. The handle fixes to the top of the screed. Fitted with end plugs and powder coated for ease of clean up.

Trowel concrete floors from a standing position. The tubular connection pivots freely to allow the changing angle between the blade and handle to occur.

The square end blade allows trowelling up against a wall.

used in conjunction with telescopic handle 1076 or clip handle 588.

(555)

(556)

TOOL: 606 – 600mm BladeThe illustration shows the standard fitting which can be locked at the desired angle. With this fitting the Fresno may also be used as a walking trowel by locking the fitting parallel to the blade.

TOOL: 607 – 600mm BladeThe Fresno may be fitted with a bracket and tilt mechanism as illustrated – used only in a push/pull operation.

TOOL: 609 -900mmBladea larger version of Tool No. 607.

(1063)

Features· long wearing aluminium alloy blade· low maintenance· Radius on blade corners reduces end marking· Gives concrete a smoother wet finish· Makes final finish easier

BLADE OPERATION:The tilt of the blade is adjustable and controlled by twisting the handle. This enables the operator to change the tilt of the blade (continuously if required) to achieve the optimum finish to the concrete. If the blade lies flat on the slab it leaves a rough finish but will close and fill holes. When the blade is tilted on an angle, a smoother finish will result. There is no need to raise or lower the handle, simply twist it for best results.

HaIR aNd FIBRe BRISTle TIMBeR SToCKThe brooms use a quality hair and fibre bristle.

Tool leNGTH (mm)

1572 600

1573 750

1574 900

(1974)

(1574)

Tool Colour Brush Texture length mm

1974 Black standard/fine 900

1974 Blue medium 900

1974 Green coarse 900

1904 Black standard/fine 900 replacement

(606)

(607)

New MeCHaN

ISM

New MeCHaN

ISM

New MeCHaN

ISM

NYloN BRISTle aluMINIuM SToCKFitted with 360 degree adjustable bracket

(Reg design No.123595)Replacement brush Tool No.1904

Medium Brush Texture

Standard/FineBrush Texture Coarse

Brush Texture


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


8 9

WARNING – When using telescopic handles and long length of clip together handle, near to electric wires or other high voltage installations, care should be taken to avoid contacting live wires as such contact may be lethal.

TELESCOPIC HANDLE & CLIP TOGETHER HANDLE CONCRETE PLACING RAKES - timber or aluminium handles available

FOAM FLOATS

FLOOR SCRAPERS

ADHESIVE SPEADERS

Ext

ens

ion

Pole

s &

Tools

Concre

te S

lab Fin

ishin

g

These trowels have a 1.6 mm thick steel blade and timber handle.

QTF has a 10 mm square tooth for applications requiring a thick bed of adhesive such as quarry tiles.

QTF 2 has a 6 mm saw tooth for areas where less adhesive is required.

TOOL: 1076 TELESCOPIC HANDLE

extends from 2.75 m to 5 m.

Widely used for many floating and finishing jobs enabling the work to be achieved from a standing position, external from the concrete slab.

The inside tube is grooved. a pin penetrates this groove. This allows the twisting action the operator applies to the handle to be transferred to the floor. The handle length is locked by lightly twisting the collet nut.

The handle also features a removable clip on steel tube adaptor (part No. 1076e). This allows the operator to unclip the handle from the tool for cleaning, storage or to fit to another tool. additional adaptor tubes 1076e may be purchased for this purpose.

Hose adapter &cut off valve

(QTF)

Spray Heads

Tool Roller Size

1045 114 x 450

1046 114 x 600

1047 114 x 7501100mm

(eaGGuN)

TOOL: 588

CLIP TOGETHER HANDLE

2 meters long.

The aluminium tube is fluted to enhance grip. The inserted end tube is zinc plated

steel, swaged down to fit neatly on the shaft of a bull , walking trowel, or broom

bracket.

Three or four of these handles may be aligned together to give a reach of 6 to 8 metres.

To obtain a 7 m reach, a 588 clip handle can be clipped onto the 1076 telescopic handle.

Fits bullfloats, brooms, walking trowels and Fresno trowels

(1076)

Tool Fits

700W 1076 & 558

708W 1076 & 558

302W 1076 & 558

312W 1076 & 558

(QTF 2)

(1076e)

(588)

SOLID ROLLER

WALKING EDGE TROWELS & GROOVERS

WATER SPRAY

(1045)

R500 Blade size 480 mm x 120 mm – push or pull concrete with the square or formed side of the blade.

R500H Blade size 480 mm x 120 mm – push or pull concrete with the square or formed side of the blade – has a steel finger welded to the blade to hook the reinforcement steel.

1156 Foam Float has an additional feature of perforated aluminium backing plate for ease of cleaning the foam after use.

1155 Sponge Foam Float features lightweight plastic handle and aluminium backing plate.

1155R Replacement foam - may be fixed using contact cement

(1155)

lHS – 190 mm wide blade – heavy stock to impact hard to remove material on floors – spare blade lHSB7

FS6 – 150 mm wide blade – light weight – spare blade FS6B

FS14 – 355 mm wide - lighter gauge blade to suit greater coverage of less difficult to remove deposit – spare blade FS14B

466 Stainless steel part circle - 75mm radius

206 semi circle - 50mm radius

413 45° Bevel edger – 100mm wide x 25mm bevel


long handle scrapers feature replaceable hardened steel blades and durable construction. Choose a scraper to suit your application.

(R500)

(R500H)

(SB)

(RH) - Timber

(1156)

STANDING BRACKET STEEL FLOATS

DISH DRAIN OR COVING TOOLS 45° BEVEL EDGER

SB Standing Bracket – This bracket may be attached to the handle of tools such as the 302 Groover or the 702 edger, to allow for the fitting of a 1076 or 588 handle. The tools can then be used in positions that are difficult to reach, or simply from a standing position.

Steel floats that are used with 1076 or 588 handle for rubbing in dry shakes toppings or stencil pattern concrete.

Tool No. Size

219W 150 x 380

209W 160 x 210

Tool description

R500 500mm blade no hook

R500H 500mm blade with reinforced hook

(206) (466)

(413 & 414)

(209W)

(219W)

(RH alum) - aluminium

700W / 708W 302W / 312W

designed for washing exposed aggregate


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


8 9

WARNING – When using telescopic handles and long length of clip together handle, near to electric wires or other high voltage installations, care should be taken to avoid contacting live wires as such contact may be lethal.

TELESCOPIC HANDLE & CLIP TOGETHER HANDLE CONCRETE PLACING RAKES - timber or aluminium handles available

FOAM FLOATS

FLOOR SCRAPERS

ADHESIVE SPEADERS

Ext

ens

ion

Pole

s &

Tools

Concre

te S

lab Fin

ishin

g

These trowels have a 1.6 mm thick steel blade and timber handle.

QTF has a 10 mm square tooth for applications requiring a thick bed of adhesive such as quarry tiles.

QTF 2 has a 6 mm saw tooth for areas where less adhesive is required.

TOOL: 1076 TELESCOPIC HANDLE

extends from 2.75 m to 5 m.

Widely used for many floating and finishing jobs enabling the work to be achieved from a standing position, external from the concrete slab.

The inside tube is grooved. a pin penetrates this groove. This allows the twisting action the operator applies to the handle to be transferred to the floor. The handle length is locked by lightly twisting the collet nut.

The handle also features a removable clip on steel tube adaptor (part No. 1076e). This allows the operator to unclip the handle from the tool for cleaning, storage or to fit to another tool. additional adaptor tubes 1076e may be purchased for this purpose.

Hose adapter &cut off valve

(QTF)

Spray Heads

Tool Roller Size

1045 114 x 450

1046 114 x 600

1047 114 x 7501100mm

(eaGGuN)

TOOL: 588

CLIP TOGETHER HANDLE

2 meters long.

The aluminium tube is fluted to enhance grip. The inserted end tube is zinc plated

steel, swaged down to fit neatly on the shaft of a bull , walking trowel, or broom

bracket.

Three or four of these handles may be aligned together to give a reach of 6 to 8 metres.

To obtain a 7 m reach, a 588 clip handle can be clipped onto the 1076 telescopic handle.

Fits bullfloats, brooms, walking trowels and Fresno trowels

(1076)

Tool Fits

700W 1076 & 558

708W 1076 & 558

302W 1076 & 558

312W 1076 & 558

(QTF 2)

(1076e)

(588)

SOLID ROLLER

WALKING EDGE TROWELS & GROOVERS

WATER SPRAY

(1045)

R500 Blade size 480 mm x 120 mm – push or pull concrete with the square or formed side of the blade.

R500H Blade size 480 mm x 120 mm – push or pull concrete with the square or formed side of the blade – has a steel finger welded to the blade to hook the reinforcement steel.

1156 Foam Float has an additional feature of perforated aluminium backing plate for ease of cleaning the foam after use.

1155 Sponge Foam Float features lightweight plastic handle and aluminium backing plate.

1155R Replacement foam - may be fixed using contact cement

(1155)

lHS – 190 mm wide blade – heavy stock to impact hard to remove material on floors – spare blade lHSB7

FS6 – 150 mm wide blade – light weight – spare blade FS6B

FS14 – 355 mm wide - lighter gauge blade to suit greater coverage of less difficult to remove deposit – spare blade FS14B

466 Stainless steel part circle - 75mm radius

206 semi circle - 50mm radius



long handle scrapers feature replaceable hardened steel blades and durable construction. Choose a scraper to suit your application.

(R500)

(R500H)

(SB)

(RH) - Timber

(1156)

STANDING BRACKET STEEL FLOATS

DISH DRAIN OR COVING TOOLS 45° BEVEL EDGER

SB Standing Bracket – This bracket may be attached to the handle of tools such as the 302 Groover or the 702 edger, to allow for the fitting of a 1076 or 588 handle. The tools can then be used in positions that are difficult to reach, or simply from a standing position.

Steel floats that are used with 1076 or 588 handle for rubbing in dry shakes toppings or stencil pattern concrete.

Tool No. Size

219W 150 x 380

209W 160 x 210

Tool description

R500 500mm blade no hook

R500H 500mm blade with reinforced hook

(206) (466)

(413 & 414)

(209W)

(219W)

(RH alum) - aluminium

700W / 708W 302W / 312W

designed for washing exposed aggregate


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


10 11

COMBINATION BLADES FLOATING BLADES

Pow

er

Trow

el B

lade

s

Pow

er Tro

wel B

lades

S36-10

Use on 36” Bartell and Wacker machines.

Fixed with 5/16” uNC HT bolts – lengths vary

Blade size – 355mm x 190mm

Weight – 7Kg per set of 4 blades

Packed – 1 Set per bundle

Combination Blades – designed to be used for both initial floating and final finishing

10-66

Use on 34” Master Finish machines that are equipped to receive it.

Fit using 10-62 countersunk square neck screw and 10-63 nut



Packed – 2 Sets per bundle

S34-18

Use on 34” Master Finish machines.

Fixed with 3/8” BSW bolts – lengths are 1½”, 2”, 2½” depending on the model




S40-18


Fixed with 3/8” BSW bolts– lengths are 1¼”,1½”, 2”, 2½” depending on the model




10-69


Fit using 10-62 countersunk square neck screw and 10-63 nut.




S46-18

Use on 46” & 48” Master Finish, Bartell and Wacker machines.





Floating Blades – These blades are designed to clip over the finishing blades and are used for initial floating of the concrete floor. Blade styles, FB34, FB40 are manufactured in two parts that bolt together, this allows the reuse of the top plate after the wear plate has worn out.

NB. Spare bolt and nut sets – 8 off – part number ‘FBBS’

(wear plate not shown) FB40

Clips over D40-2 finishing blade


Weight – 10 Kg per set of 4 blades


Replacement wear plate FB40WP

Weight – 6.5 Kg per set of 4 blades

Packed - 2 sets per bundle

10-68

Fits over D40-2 finishing blade and is secured by wire tie around blade arm of the machine




BF36

Fits over D36-2 finishing blade and is secured by clip over blade bar

Blade Size – 260 x 355mm

Weight – 8kg

Packed – 4 blades

BF48



Weight – 12kg

Packed – 4 blades

FB34









Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


10 11

COMBINATION BLADES FLOATING BLADES

Pow

er

Trow

el B

lade

s

Pow

er Tro

wel B

lades

S36-10






Combination Blades – designed to be used for both initial floating and final finishing

10-66


Fit using 10-62 countersunk square neck screw and 10-63 nut




S34-18


Fixed with 3/8” BSW bolts – lengths are 1½”, 2”, 2½” depending on the model




S40-18


Fixed with 3/8” BSW bolts– lengths are 1¼”,1½”, 2”, 2½” depending on the model




10-69


Fit using 10-62 countersunk square neck screw and 10-63 nut.




S46-18






Floating Blades – These blades are designed to clip over the finishing blades and are used for initial floating of the concrete floor. Blade styles, FB34, FB40 are manufactured in two parts that bolt together, this allows the reuse of the top plate after the wear plate has worn out.

NB. Spare bolt and nut sets – 8 off – part number ‘FBBS’

(wear plate not shown) FB40








10-68

Fits over D40-2 finishing blade and is secured by wire tie around blade arm of the machine




BF36



Weight – 8kg

Packed – 4 blades

BF48



Weight – 12kg

Packed – 4 blades

FB34









Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


12 13

FINISHING BLADES

Pow

er

Trow

el B

lade

s

Finishing Blades – These blades are manufactured from hardened and tempered carbon steel and are used where a finer finish is required on the concrete, for example, warehouse floors. The blades are reversible so that when the edge is worn, they may be turned around for a second use.

D34-3


Fit using 3/8” BSW bolts.




D46-2






D40-2


Fixed with 3/8” BSW bolts.




D36-2






USING DUAL BLADE SYSTEM

Remove float bladeFinish floor using reversible finishing blade

Float blade clipped to finishing blade for initial floating of floor

“24” TROWEL MACHINE

“TS SERIES” TROWEL MACHINE

Pow

er Tro

wels

description HP Ring diameter Weight Blade Choice Model Code

24” 6.5 610mm 67kg T600FB T600M


34” 6.5 865mm 70kg Combination TS34-18

34” 6.5 865mm 72kg Finishing Td34-3



* Powered by reliable Honda 4 Stroke engine

* Proven MasterFinish design

* local parts and service

* Built in australia for australian conditions

• Combination Blades • Dual Blades

BLADE STYLES

or +

* Height adjustable Handle Bar Stem

* Powered by a reliable Honda 4 Stroke engine

* Heavy duty Gear Box & Base assembly


* lifting Hook



24” REPLACEMENT BLADES

T600FB (4 Pack)T600P - Replacement Floating Pan


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


12 13

FINISHING BLADES

Pow

er

Trow

el B

lade

s

Finishing Blades – These blades are manufactured from hardened and tempered carbon steel and are used where a finer finish is required on the concrete, for example, warehouse floors. The blades are reversible so that when the edge is worn, they may be turned around for a second use.

D34-3


Fit using 3/8” BSW bolts.




D46-2






D40-2


Fixed with 3/8” BSW bolts.




D36-2






USING DUAL BLADE SYSTEM

Remove float bladeFinish floor using reversible finishing blade

Float blade clipped to finishing blade for initial floating of floor


“TS SERIES” TROWEL MACHINE

Pow

er Tro

wels


24” 6.5 610mm 67kg T600FB T600M










• Combination Blades • Dual Blades

BLADE STYLES

or +

* Height adjustable Handle Bar Stem

* Powered by a reliable Honda 4 Stroke engine



* lifting Hook



24” REPLACEMENT BLADES

T600FB (4 Pack)T600P - Replacement Floating Pan


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


14 15

Pow

er

Trow

els




* lifting Hook




Concre

te G

rinder


48” 9 1220mm 106kg Combination 9HS46-18

48” 9 1200mm 106kg Finishing 9Hd46-2

CONCRETE & TERAZZO FLOOR GRINDING MACHINE

Complete ease of control achieved by using the finger light wheel height adjustment

Powered by 2 HP Single phase electric motor which can be connected to normal household supply.

Fitted with 25mtr, 25amp electric cable

Two men can handle the machine onto the most awkward job site

Minimum maintenance - 2 greasing points only

Can be fitted with a variety of disks to suit most types of abrasive segments. (Standard disc as illustrated - self locking wedge segments).

Robust fabricated steel construction

Supplied with fabric dust shield

a vacuum hose can be connected to the machine to remove any air-born dust

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8) (9)

Specifications:

Code G1 - a

Weight 85 kg

disc Speed 360 rpm

disc diameter 360 mm

overall size (mm) 940 x 520 x 950

Carb Grinding Block

diamond Grinding Block

(029) (d/RuBS)

• Lifting bracket included


Powered byAdvanced 4 Stroke Technology

applications

large concrete pourscoving or steel Finishes

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


14 15

Pow

er

Trow

els




* lifting Hook




Concre

te G

rinder


48” 9 1220mm 106kg Combination 9HS46-18

48” 9 1200mm 106kg Finishing 9Hd46-2

CONCRETE & TERAZZO FLOOR GRINDING MACHINE

Complete ease of control achieved by using the finger light wheel height adjustment

Powered by 2 HP Single phase electric motor which can be connected to normal household supply.

Fitted with 25mtr, 25amp electric cable

Two men can handle the machine onto the most awkward job site

Minimum maintenance - 2 greasing points only

Can be fitted with a variety of disks to suit most types of abrasive segments. (Standard disc as illustrated - self locking wedge segments).

Robust fabricated steel construction

Supplied with fabric dust shield

a vacuum hose can be connected to the machine to remove any air-born dust

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8) (9)

Specifications:

Code G1 - a

Weight 85 kg

disc Speed 360 rpm

disc diameter 360 mm

overall size (mm) 940 x 520 x 950

Carb Grinding Block

diamond Grinding Block

(029) (d/RuBS)

• Lifting bracket included


Powered byAdvanced 4 Stroke Technology

applications

large concrete pourscoving or steel Finishes

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


16 17

Dri

ve U

nits

Pum

ps &

Shafts

* MasterFinish flexible shaft driven heavy duty pumps are portable and can be used in a variety of applications

* available as standard premium aluminium pump or heavy duty cast iron model – both with Stainless Steel Impeller for improved abrasion resistance

* Self Priming, choke resistant, stainless steel spindle, and oil bath lubrication

* Fitted with a quick action flexshaft coupling with a 3 tooth drive dog enabling them to be operated by all standard drive units

* Fitted with an adaptor for camlock quick action hose fittings

application: General purpose slabs, precast panels, bridge culverts

MasterFinish flexible vibrations shafts provide high frequency vibration from a low flexshaft speed. Manufactured at a standard 6 metre length, the pendulum tip vibrator generates a high frequency vibration driving out entrapped air, providing improved compaction, strength and finish of concrete. (3m extension shaft available KSeS)

Features:

* Heavy duty 3 dog drive coupling

* Quick action flexshaft connection from petrol, electric and diesel drive units

Specifications:

Model KS212

Type aluminium Pump

Weight 32kg

Impeller Stainless Steel

Specifications:

Model KS212CI

Type Cast Iron H/duty Pump

Weight 42kg


Specifications:

Code Size” Size mm

KSV-2 1 ¼ 32

KSV-3 1 ½ 38

KSV-4 1 ¾ 44

KSV-5 2 50

KSV-57 2 ¼ 57

KSV-6 2 ½ 62

SUBMERSIBLE PUMP

FLEXIBLE VIBRATIONS SHAFTS

an

ti KinK pRotEction

* dished steel base for mobility

* Honda GX160 4-stroke Motor

* Spring Mounted engine isolation vibrators

DRIVE UNIT

“SPRING MOUNT”DRIVE UNIT

Type engine Weight Speed Model No.

drive unit GX160 4-Stroke 31kg 3000rpm Hd5


Spring Mount drive unit GX160 30kg 3000rpm K1620

anti-Vibe Engine Mount

Quick connection

Removable Frame

* New improved coupling design

* external coupling spring to allow easy operation and maintenance

* New engine mounting for reduced vibration

* Compact design allows easier handling

* Roll resistant design

Quick connection



Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


16 17

Dri

ve U

nits

Pum

ps &

Shafts

* MasterFinish flexible shaft driven heavy duty pumps are portable and can be used in a variety of applications

* available as standard premium aluminium pump or heavy duty cast iron model – both with Stainless Steel Impeller for improved abrasion resistance

* Self Priming, choke resistant, stainless steel spindle, and oil bath lubrication

* Fitted with a quick action flexshaft coupling with a 3 tooth drive dog enabling them to be operated by all standard drive units

* Fitted with an adaptor for camlock quick action hose fittings

application: General purpose slabs, precast panels, bridge culverts

MasterFinish flexible vibrations shafts provide high frequency vibration from a low flexshaft speed. Manufactured at a standard 6 metre length, the pendulum tip vibrator generates a high frequency vibration driving out entrapped air, providing improved compaction, strength and finish of concrete. (3m extension shaft available KSeS)

Features:

* Heavy duty 3 dog drive coupling

* Quick action flexshaft connection from petrol, electric and diesel drive units

Specifications:

Model KS212

Type aluminium Pump

Weight 32kg


Specifications:

Model KS212CI

Type Cast Iron H/duty Pump

Weight 42kg


Specifications:

Code Size” Size mm

KSV-2 1 ¼ 32

KSV-3 1 ½ 38

KSV-4 1 ¾ 44

KSV-5 2 50

KSV-57 2 ¼ 57

KSV-6 2 ½ 62

SUBMERSIBLE PUMP

FLEXIBLE VIBRATIONS SHAFTSa

nti KinK pRotEction

* dished steel base for mobility

* Honda GX160 4-stroke Motor

* Spring Mounted engine isolation vibrators

DRIVE UNIT

“SPRING MOUNT”DRIVE UNIT


drive unit GX160 4-Stroke 31kg 3000rpm Hd5


Spring Mount drive unit GX160 30kg 3000rpm K1620


Quick connection

Removable Frame

* New improved coupling design

* external coupling spring to allow easy operation and maintenance

* New engine mounting for reduced vibration

* Compact design allows easier handling

* Roll resistant design

Quick connection



Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


18 19

Sho

vels

& R

eo J

ack

Handy V

ibes

“DELUXE” HANDY VIBE

HANDY VIBE

Type engine Weight Frequency Model No.

Hard Nose (44mm) GX35 4-Stroke 13kg 9000 (Vib/Min) HV44

Hard Nose (44mm) GX35 4-Stroke 12kg 9000 (Vib/Min) HV44e (no cage)

Resilient Nose (44mm) GX35 4-Stroke 13kg 9000 (Vib/Min) HV44RN


Hard Nose (25mm) GX35 4-Stroke 9kg 9000 (Vib/Min) PV25

safe-t-Cage engine Protection

Model: PV25

engine - GX35 Honda

Type: Hard Nose - fully flexible shaft

Frequency: 9000 (Vib/Min)

Weight: 9kg


ReSILIeNT TIP

* Powered by Honda’s lightweight 4-Stroke, the HandyVibe makes vibrating concrete simple and convenient.

* Safe-T-Cage unique protective system, reduces chances of damage to engine.

* No additional requirement for separate drive unit or shaft.

* ultra-reliable Honda 4-Stroke engine with no mixing of fuel required.

* ergonomic designed handles and shoulder strap.

D HANDLE STEEL SHOVELS

REO JACK

• Made from recycled railway steel

• Eco-friendly

• Strong Light weight design

• Powder coated finish

• Heavy Duty

Code Size

MFYSl 43”

MFWSS 39”

MFYSl

MFWSS

Code Weight

Rl 1.3kg

• For safer & easier placing of reo bar chairs.

• Design to reduce the strain on contractors back.

• Improves efficiency - one man operation.

• Heavy duty construction and lifting hook.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


18 19

Sho

vels

& R

eo J

ack

Handy V

ibes

“DELUXE” HANDY VIBE

HANDY VIBE


Hard Nose (44mm) GX35 4-Stroke 13kg 9000 (Vib/Min) HV44

Hard Nose (44mm) GX35 4-Stroke 12kg 9000 (Vib/Min) HV44e (no cage)

Resilient Nose (44mm) GX35 4-Stroke 13kg 9000 (Vib/Min) HV44RN


Hard Nose (25mm) GX35 4-Stroke 9kg 9000 (Vib/Min) PV25

safe-t-Cage engine Protection

Model: PV25

engine - GX35 Honda

Type: Hard Nose - fully flexible shaft

Frequency: 9000 (Vib/Min)

Weight: 9kg


ReSILIeNT TIP

* Powered by Honda’s lightweight 4-Stroke, the HandyVibe makes vibrating concrete simple and convenient.

* Safe-T-Cage unique protective system, reduces chances of damage to engine.

* No additional requirement for separate drive unit or shaft.

* ultra-reliable Honda 4-Stroke engine with no mixing of fuel required.

* ergonomic designed handles and shoulder strap.

D HANDLE STEEL SHOVELS

REO JACK

• Made from recycled railway steel

• Eco-friendly

• Strong Light weight design

• Powder coated finish

• Heavy Duty

Code Size

MFYSl 43”

MFWSS 39”

MFYSl

MFWSS

Code Weight

Rl 1.3kg

• For safer & easier placing of reo bar chairs.

• Design to reduce the strain on contractors back.

• Improves efficiency - one man operation.

• Heavy duty construction and lifting hook.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


20 21

EA

SY

MIX

Reo C

utte

rs & B

enders

• Most popular and widely used with all purpose cuts

• Adaptable from soft to medium hard materials

• Quick and easy cut of reinforcing rods and bolts

• Blades are drop forged from alloy tool steel

• Carefully heat-treated for maximum strength and wear resistance

• Unique side adjustment of blades for accuracy

• All tubular handles with ductile handles

• Made in Japan

• 16mm Capacity

• Specifically designed for cutting and precision bending of reinforcing rods

• 90°, 135°, 180° bending of reinforcing rods can be achieved


• Tool can be bolted to floor or timber board for easy operation

• Made in Japan

BOLT CUTTERS550 POWERPLATE COMPACTOR

2.2 CFT MIXER

WHEEL BARROW

3.5 CFT MIXER

REO CUTTER BENDER

Part No. length Weight Cutting Capacity Spare Blade

mm (inch) kg 80 HRB Rod 20 HRC Rod 36 HRC Rod no.

BC0760 600 (24”) 2.5 10 10 8 BCe-0060

BC0775 750 (30”) 3.85 13 13 10 BCe-0075

BCo790 900 (36”) 5.9 16 14 11 BCe-0090

BCo710 1050 (42”) 8.05 18 16 13 BCe-0010

Part No. length Weight Max Capacity Spare Blade

mm (inch) kg for 590N/mm no.

SCB-16 1250 (50”) 17 16 (5/8”) SCBe-16

BC0760


Tray: 1.6 steel wired edge, concealed fixings bolted with Nyloc nuts.

Wheel size: 2mm steel powder coated. 16.650 x 8 c/w precision ground sealed bearings.

Tyre size: 16.650 x 8.4 ply nylon.

option: steel handles – S. Timber handles – T. Weight 27kg

Height (inc. handle): 1150 mm

Width: 500 mm

Plate width: 500 mm

Plate length: 550 mm

Total weight: 82kg

Vibrating system: ecentric Rotation

Centrifugal force: 1500 kg (21KN)

Travel speed: 20 metres/minute

Hill climbing ability: 20 degrees (approx)

• Ball bearing head for pinion & bowl.

• Cast iron drive pinion and ring gear.

• Steel wheels on heavy duty axles.

• Leak-free seam-welded bowl.

• 9 heavy duty beaters.

• Polyethylene safety covers.

• 400 x 8 Pneumatic tyres.

• Petrol or 550 W electric motor.

• Weight without motor 110kg.

These heavy duty mixers are percision engineered throughout and have set the standard for the construction industry. They are easy to handle and when fitted with telescopic axle, can pass through standard doorways.

• Heavy duty tubular steel frame,

• Maintenance free ball bearing head for pinion and bowl.

• Seam welded bowl

• Bowl contains six heavy duty beaters

• Polymer motor covers

• High strength polymer wheels on heavy duty axles

• 330 watt electric motor

Code Weight

e550 82kg

Code Weight

W600 27kg

Code description

eP22-4 2.2 CFT electric Motor

Code description


eP35H 3.5 CFT Honda Motor

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


20 21

EA

SY

MIX

Reo C

utte

rs & B

enders

• Most popular and widely used with all purpose cuts

• Adaptable from soft to medium hard materials

• Quick and easy cut of reinforcing rods and bolts


• Carefully heat-treated for maximum strength and wear resistance

• Unique side adjustment of blades for accuracy

• All tubular handles with ductile handles

• Made in Japan

• 16mm Capacity

• Specifically designed for cutting and precision bending of reinforcing rods

• 90°, 135°, 180° bending of reinforcing rods can be achieved


• Tool can be bolted to floor or timber board for easy operation

• Made in Japan

BOLT CUTTERS550 POWERPLATE COMPACTOR

2.2 CFT MIXER

WHEEL BARROW

3.5 CFT MIXER

REO CUTTER BENDER

Part No. length Weight Cutting Capacity Spare Blade

mm (inch) kg 80 HRB Rod 20 HRC Rod 36 HRC Rod no.

BC0760 600 (24”) 2.5 10 10 8 BCe-0060

BC0775 750 (30”) 3.85 13 13 10 BCe-0075

BCo790 900 (36”) 5.9 16 14 11 BCe-0090

BCo710 1050 (42”) 8.05 18 16 13 BCe-0010

Part No. length Weight Max Capacity Spare Blade

mm (inch) kg for 590N/mm no.

SCB-16 1250 (50”) 17 16 (5/8”) SCBe-16

BC0760


Tray: 1.6 steel wired edge, concealed fixings bolted with Nyloc nuts.

Wheel size: 2mm steel powder coated. 16.650 x 8 c/w precision ground sealed bearings.

Tyre size: 16.650 x 8.4 ply nylon.

option: steel handles – S. Timber handles – T. Weight 27kg

Height (inc. handle): 1150 mm

Width: 500 mm

Plate width: 500 mm

Plate length: 550 mm

Total weight: 82kg

Vibrating system: ecentric Rotation

Centrifugal force: 1500 kg (21KN)

Travel speed: 20 metres/minute

Hill climbing ability: 20 degrees (approx)

• Ball bearing head for pinion & bowl.

• Cast iron drive pinion and ring gear.

• Steel wheels on heavy duty axles.

• Leak-free seam-welded bowl.

• 9 heavy duty beaters.

• Polyethylene safety covers.

• 400 x 8 Pneumatic tyres.

• Petrol or 550 W electric motor.

• Weight without motor 110kg.

These heavy duty mixers are percision engineered throughout and have set the standard for the construction industry. They are easy to handle and when fitted with telescopic axle, can pass through standard doorways.

• Heavy duty tubular steel frame,

• Maintenance free ball bearing head for pinion and bowl.

• Seam welded bowl

• Bowl contains six heavy duty beaters

• Polymer motor covers

• High strength polymer wheels on heavy duty axles

• 330 watt electric motor

Code Weight

e550 82kg

Code Weight

W600 27kg

Code description


Code description


eP35H 3.5 CFT Honda Motor

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


22 23

High strength, light weight aluminum mounting. Compression fit stainless steel rivets.

each blade is cross ground to just the right dimension for that perfect "Broken-in" feel.

Guaranteed "No TuRN" handle design locks handle to mounting.

Comfortable ProForm® Handle with a special textured ribbing for that "Great Grip".Precision ground edge

for professional finish.

oversized toe rivet for extra strength.

Trowel packaging with unique "open View" design and colorful graphics

ProForm® Trowel Handle (uS PaTeNT #6,247,204 B1)

Tool Size

CF207PF 11”x4”

CF217PF 14”x4”

CF219PF 14”x4-3/4”

CF222PF 16”x4”

CF227PF 18”x4”

CF228PF 18”x4-12”

CF232PF 20”x5”

CF234PF 24”x5”

CARBON STEEL

Tool Size

CF731BPF 14”x4”

CF732BPF 16”x4”

CF729BPF 18”x4”

CF734BPF 20”x5”

CF735BPF 24”x5”

standard

shank

Philadelphia Blade Pattern

WIDE LONDON PATTERN TROWEL PHILADELPHIA PATTERN TROWEL

DIRT TAMPER CONCRETE SLIDERS (knee Boards)BRICK JOINTERS

excellent way to tamp dirt surfaces. Cast iron tamper fitted with a 44” hardwood handle.

Made of lightweight, tough heavy-duty polystyrene plastic. easy to use, easy to clean. one size fits all. Knee pads are replaceable.

each end makes a different size joint. overall length 10-1/2”.

W.R

ose

Bri

ck T

row

els

& T

ools

Dry

wall H

aw

ks

Concre

te Fin

ishin

g Tro

wels

standard

shank

Wide London Blade Pattern

Tool Blade Size Heel Width

Ro112-12SHPF 12” 5-13/16”


Ro110-12SHPF 12” 5-9/16”

Tool Size Weight

CC926 10”x10” 14 lbs.

Tool Size

CC153 (Pair) 30”x10”

Tool Size

Bl260 3/8”x1/2”

Bl261 1/2”x5/8”

Bl262 5/8”x3/4”

Bl264 3/4”x7/8”

Bl265 7/8”x1”

Wide london Pattern with ProForm® Grip

(Ro112-12SHPF)

Philadelphia Pattern with ProForm® Grip

(Ro110-12SHPF)

dirt TamperCast Iron Base

(CC926)

Made of high carbon steel

JUMBO UTILITY BRUSH

PRO MAG DRYWALL HAWKS

This red handle utility brush is a must for any professional. long wearing, white tampico fibres can be used on masonry, brick, tile and stone. a truly versatile brush.

Comfortable ProForm® handle with special textured ribbing for that “Great Grip”. Fitted with 1/2” thick sponge rubber hand protector.

Tool Size

Bl526 6-1/2”x2”x4”

Tool Size

Pl266PF 16”x16”

Pl264PF 14”x14”

Pl263PF 13”x13”

SKATE WHEEL JOINT RAKER

(Bl210)

Masons love this big wheeled joint raker. Wheels are 1-3/4” in diameter, mounted 1-3/4” apart. overall width is 3”. Has 8-1/2” aluminum handle that is squared off at the end so you can rod joints. Hardened nail is adjusted for depth.

TM

30% lighter than aluminum

Pl250PF Replacement Handle

Pl249 extra 1/2" callous preventer (sponge rubber) will fit any hawk

ALUMINUM DRYWALL HAWKS

Heavy-duty aluminum hawk, fitted with comfortable ProForm® handle. Smooth straight edges with rounded corners.

Tool Size

Pl513PF 13”x13”

Pl512PF 12”x12”

Pl510PF 10”x10”

US Patent # D508 638

High quality blue steel with additional flexibility. Forged aluminum shank.

BLUE STEEL

High quality heat treated Swedish stainless steel. Special alloy will not rust, pit, or stain. Forged aluminum shank

Heat treated golden stainless steel. Special alloy will not rust, pit, or stain. Forged aluminum shank.

SWEDISH STAINLESS STEEL GOLDEN STAINLESS STEEL

Tool Size

CF742PF 12”x4”

CF744PF 14”x4”

Tool Size

CF540PF 14”x4-3/4”

CF549PF 20”x5”

WITH PROFORM® HANDLE

CONCRETE FINISH TROWELS

Precision BalancedBroken-in & Ready to UseProfessional Quality

(CC153)


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


22 23

High strength, light weight aluminum mounting. Compression fit stainless steel rivets.

each blade is cross ground to just the right dimension for that perfect "Broken-in" feel.

Guaranteed "No TuRN" handle design locks handle to mounting.

Comfortable ProForm® Handle with a special textured ribbing for that "Great Grip".Precision ground edge

for professional finish.

oversized toe rivet for extra strength.

Trowel packaging with unique "open View" design and colorful graphics


Tool Size

CF207PF 11”x4”

CF217PF 14”x4”

CF219PF 14”x4-3/4”

CF222PF 16”x4”

CF227PF 18”x4”

CF228PF 18”x4-12”

CF232PF 20”x5”

CF234PF 24”x5”

CARBON STEEL

Tool Size

CF731BPF 14”x4”

CF732BPF 16”x4”

CF729BPF 18”x4”

CF734BPF 20”x5”

CF735BPF 24”x5”

standard

shank

Philadelphia Blade Pattern

WIDE LONDON PATTERN TROWEL PHILADELPHIA PATTERN TROWEL

DIRT TAMPER CONCRETE SLIDERS (knee Boards)BRICK JOINTERS

excellent way to tamp dirt surfaces. Cast iron tamper fitted with a 44” hardwood handle.

Made of lightweight, tough heavy-duty polystyrene plastic. easy to use, easy to clean. one size fits all. Knee pads are replaceable.

each end makes a different size joint. overall length 10-1/2”.

W.R

ose

Bri

ck T

row

els

& T

ools

Dry

wall H

aw

ks

Concre

te Fin

ishin

g Tro

wels

standard

shank

Wide London Blade Pattern


Ro112-12SHPF 12” 5-13/16”


Ro110-12SHPF 12” 5-9/16”

Tool Size Weight

CC926 10”x10” 14 lbs.

Tool Size

CC153 (Pair) 30”x10”

Tool Size

Bl260 3/8”x1/2”

Bl261 1/2”x5/8”

Bl262 5/8”x3/4”

Bl264 3/4”x7/8”

Bl265 7/8”x1”

Wide london Pattern with ProForm® Grip

(Ro112-12SHPF)

Philadelphia Pattern with ProForm® Grip

(Ro110-12SHPF)

dirt TamperCast Iron Base

(CC926)

Made of high carbon steel

JUMBO UTILITY BRUSH

PRO MAG DRYWALL HAWKS

This red handle utility brush is a must for any professional. long wearing, white tampico fibres can be used on masonry, brick, tile and stone. a truly versatile brush.

Comfortable ProForm® handle with special textured ribbing for that “Great Grip”. Fitted with 1/2” thick sponge rubber hand protector.

Tool Size

Bl526 6-1/2”x2”x4”

Tool Size

Pl266PF 16”x16”

Pl264PF 14”x14”

Pl263PF 13”x13”

SKATE WHEEL JOINT RAKER

(Bl210)

Masons love this big wheeled joint raker. Wheels are 1-3/4” in diameter, mounted 1-3/4” apart. overall width is 3”. Has 8-1/2” aluminum handle that is squared off at the end so you can rod joints. Hardened nail is adjusted for depth.

TM

30% lighter than aluminum

Pl250PF Replacement Handle

Pl249 extra 1/2" callous preventer (sponge rubber) will fit any hawk

ALUMINUM DRYWALL HAWKS

Heavy-duty aluminum hawk, fitted with comfortable ProForm® handle. Smooth straight edges with rounded corners.

Tool Size

Pl513PF 13”x13”

Pl512PF 12”x12”

Pl510PF 10”x10”

US Patent # D508 638

High quality blue steel with additional flexibility. Forged aluminum shank.

BLUE STEEL

High quality heat treated Swedish stainless steel. Special alloy will not rust, pit, or stain. Forged aluminum shank

Heat treated golden stainless steel. Special alloy will not rust, pit, or stain. Forged aluminum shank.

SWEDISH STAINLESS STEEL GOLDEN STAINLESS STEEL

Tool Size

CF742PF 12”x4”

CF744PF 14”x4”

Tool Size

CF540PF 14”x4-3/4”

CF549PF 20”x5”

WITH PROFORM® HANDLE

CONCRETE FINISH TROWELS

Precision BalancedBroken-in & Ready to UseProfessional Quality

(CC153)


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


24 25

Tool Size Shank

CF274PF 10”x3” 3”

CF276PF 12”x3-1/2” 4-3/8”

CF277PF 14”x4” 6”

CF279PF 16”x4” 7-5/8”

ProForm® Handle

ProForm® Handle

ProForm® Handle

ProForm® Handle

ProForm® Handle

ProForm® Handle

ProForm® Handle

Pool &

Dry

wall T

row

els

Trow

els a

nd B

ullfl

oats

Mech

anism

s

Short shank, more flexible blade

extra hard troweling blade for long wear. Hardened chrome surface great for pool work. eliminates burn marks. exposed rivets for extra strength. Forged aluminum shanks.

POOL TROWELS

DRYWALL TROWELS

Tool Size Shank

CF274BPF 10”x3” 3”

CF276BPF 12”x3-1/2” 4-3/8”

CF277BPF 14”x4” 6”

CF279BPF 16”x4” 7-5/8”

CF292BPF 18”x5” 9-5/8”

CF295BPF 20”x5” 11-5/8”

Tool Size Shank

CF745BPF 24”x4” 15-5/8”

CF746BPF 24”x5” 15-5/8”

long shank, less flexible blade

Made of heat treated swedish stainless steel. Special alloy will not rust, pit, or stain. Forged aluminum shanks.

Made of heat treated golden stainless steel. Special alloy will not rust, pit, or stain. Forged aluminum shanks.

BLUE STEEL – SHORT SHANKS

CARBON STEEL

CHROME (NO BURN)

BLUE STEEL – LONG SHANKS

SWEDISH STAINLESS STEEL

GOLDEN STAINLESS STEEL – SHORT SHANKS

GOLDEN STAINLESS STEEL

Tool Size Shank

CF490PF 10”x3” 3-1/2”

Tool Size

Pl447PF 11”x4-3/4”

Tool Size

Pl547PF 11”x4-3/4”

Tool Size

Pl455PF 11”x4-3/4”


CARBON STEEL PIPE TROWEL

BULLFLOAT MECHANISMS

CARBON STEEL MIDGET TROWEL

Finish hard to get places in half the time, with half the effort. The offset handle lets you slip the trowel between pipes: the long nose makes it easy to get behind fixtures.

Great for window sills, closets and small areas. Carry one in your tool bag for those tough jobs.

ProForm® handle

ProForm® handle

Tool Size

Pl407PF 8”x3”

Tool Size

Pl501PF 10-1/2”x3”


Orbit-R

rbit-R

rbit-R

TILT BRACKET

ALL DOUBLE ACTION TILT BRACKETS...ACCEPT HANDLES INSIDE OR OUT.

1-3/8" handle fits inside

1-3/4" handle fits outside

BRONCOTM TILT

Made of rugged lightweight aluminum. Pitch of blade controlled by turning handle. eliminates bending and lifting. designed to fit all 2 or 4 hole metal bull floats. No adapter needed.

Patent #4,856,932

(CC280)

Ezy-TILT®

Made of rugged lightweight aluminum. Pitch of blade controlled by turning handle. eliminates bending and lifting. Fits only 2 hole metal bull floats. Converter plate (CC287) required when mounting to 4 hole metal bull float.

(CC290)KNUCKLEHEAD® IIBULL FLOAT BRACKETFits all 2 or 4 hole metal bull floats. No adapter needed.

LIGHTER DESIGN HELPS TO ELIMINATE CONCRETE BUILD UP!

Fits 1-3/4" or 1-3/8" button

handles

Made of rugged lightweight aluminum. one to one turning ratio of handle and pitch of blade. Protected grease reservoir for longer wear. Turning handle eliminates bending and lifting.

Knucklehead® II Rebuild Kit. Includes plastic bushing and snap rings.

uS PaTeNT #4,335,485

(CC296K)

“THE ORIGINAL” WITH NEW AND IMPROVED DESIGN


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


24 25

Tool Size Shank

CF274PF 10”x3” 3”

CF276PF 12”x3-1/2” 4-3/8”

CF277PF 14”x4” 6”

CF279PF 16”x4” 7-5/8”

ProForm® Handle

ProForm® Handle

ProForm® Handle

ProForm® Handle

ProForm® Handle

ProForm® Handle

ProForm® Handle

Pool &

Dry

wall T

row

els

Trow

els a

nd B

ullfl

oats

Mech

anism

s

Short shank, more flexible blade

extra hard troweling blade for long wear. Hardened chrome surface great for pool work. eliminates burn marks. exposed rivets for extra strength. Forged aluminum shanks.

POOL TROWELS

DRYWALL TROWELS

Tool Size Shank

CF274BPF 10”x3” 3”

CF276BPF 12”x3-1/2” 4-3/8”

CF277BPF 14”x4” 6”

CF279BPF 16”x4” 7-5/8”

CF292BPF 18”x5” 9-5/8”

CF295BPF 20”x5” 11-5/8”

Tool Size Shank

CF745BPF 24”x4” 15-5/8”

CF746BPF 24”x5” 15-5/8”

long shank, less flexible blade

Made of heat treated swedish stainless steel. Special alloy will not rust, pit, or stain. Forged aluminum shanks.

Made of heat treated golden stainless steel. Special alloy will not rust, pit, or stain. Forged aluminum shanks.

BLUE STEEL – SHORT SHANKS

CARBON STEEL

CHROME (NO BURN)

BLUE STEEL – LONG SHANKS

SWEDISH STAINLESS STEEL

GOLDEN STAINLESS STEEL – SHORT SHANKS

GOLDEN STAINLESS STEEL

Tool Size Shank

CF490PF 10”x3” 3-1/2”

Tool Size

Pl447PF 11”x4-3/4”

Tool Size

Pl547PF 11”x4-3/4”

Tool Size

Pl455PF 11”x4-3/4”


CARBON STEEL PIPE TROWEL

BULLFLOAT MECHANISMS

CARBON STEEL MIDGET TROWEL

Finish hard to get places in half the time, with half the effort. The offset handle lets you slip the trowel between pipes: the long nose makes it easy to get behind fixtures.

Great for window sills, closets and small areas. Carry one in your tool bag for those tough jobs.

ProForm® handle

ProForm® handle

Tool Size

Pl407PF 8”x3”

Tool Size

Pl501PF 10-1/2”x3”


Orbit-R

rbit-R

rbit-R

TILT BRACKET

ALL DOUBLE ACTION TILT BRACKETS...ACCEPT HANDLES INSIDE OR OUT.

1-3/8" handle fits inside

1-3/4" handle fits outside

BRONCOTM TILT

Made of rugged lightweight aluminum. Pitch of blade controlled by turning handle. eliminates bending and lifting. designed to fit all 2 or 4 hole metal bull floats. No adapter needed.

Patent #4,856,932

(CC280)

Ezy-TILT®

Made of rugged lightweight aluminum. Pitch of blade controlled by turning handle. eliminates bending and lifting. Fits only 2 hole metal bull floats. Converter plate (CC287) required when mounting to 4 hole metal bull float.

(CC290)KNUCKLEHEAD® IIBULL FLOAT BRACKETFits all 2 or 4 hole metal bull floats. No adapter needed.

LIGHTER DESIGN HELPS TO ELIMINATE CONCRETE BUILD UP!

Fits 1-3/4" or 1-3/8" button

handles

Made of rugged lightweight aluminum. one to one turning ratio of handle and pitch of blade. Protected grease reservoir for longer wear. Turning handle eliminates bending and lifting.

Knucklehead® II Rebuild Kit. Includes plastic bushing and snap rings.

uS PaTeNT #4,335,485

(CC296K)

“THE ORIGINAL” WITH NEW AND IMPROVED DESIGN


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


26 27

Bull F

loat

Bla

des,

Channel Fl

oat,

G

roove

rs&

Bit

s

Butto

n E

xte

nsio

n H

andle

s

BULL FLOATS

TM

add "01" after part number for float less bracket


MULTI-RIBBED FOR

EXTRA STRENGTH!

ROUND END BULL FLOAT

CHANNEL FLOATS

lightweight and longer lasting than aluminum alloy. Float blade is “broken-in”, curved and balanced to prevent digging. use with threaded handles. Floats will accept any 4-hole adjustable tilting handle bracket. Complete with 4 hole bracket assembly (CC800).

Great finishing tool - extra strong. Ideal for many jobs, flatwork, paving, etc. Broken-in rounded edges with eZY-Tilt® II bracket.

Tool Size

CC736 36”x8”

CC742 42”x8”

CC803 48”x8”

Tool Size

CC044 48”x6”

Tool Size

Wl069 14”x24”

TM

attaches with two thumbscrews. use bull float as groover. Mount as many groovers as needed. Works on 8" wide bull floats.

Tool Bit depth Radius Width

CC940 3/4” 1/4” 1/2”

CC941 1” 1/4” 1/2”

CC942 1-1/2” 1/4” 1/2”

CC943 2” 1/4” 1/2”

BRONZE BULL FLOAT GROOVER BITS EZ-KNEELER

CauTIoN: Metal extension Handles / adapters should not be used near electrical wiring.

UNIQUE

DESIGN

BUTTON EXTENSION HANDLES

1-3/4" diameter. Swaged Handle.

AluminumButton

SWAGED HANDLES ARE ALUMINUM ANODIZED...PREVENTS HANDS FROM TURNING BLACK CAUSED BY OXIDATION!

Blue Anodized

Tool Size

CC289S 6’ Swaged Handle - Silver anodized

CC289SB 6’ Swaged Handle - Blue anodized



CC336B 6’Swaged Handle - Blue anodized


MULTI-TRACBULL FLOAT GROOVER

Produces a uniform sharp groove in various concrete applications where water drainage and traction are critical.

Cuts Perfect Grooves EVERyTIME!

Cuts clean, sharp grooves every time!

TM

Bottom view

End view


Provides the knees comfortable support and protection. Washable & Chemical resistant. Smooth non marking base. 2” thick rubber cushion.

IDEAL FOR:

• Streets• Highways• Off Ramps • Approach Ramps• Safety Ramps• Bridges

Code description Spacing

CC974 36” x 8” Float 2 ¼ Spacing

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


26 27

Bull F

loat

Bla

des,

Channel Fl

oat,

G

roove

rs&

Bit

s

Butto

n E

xte

nsio

n H

andle

s

BULL FLOATS

TM



MULTI-RIBBED FOR

EXTRA STRENGTH!

ROUND END BULL FLOAT

CHANNEL FLOATS

lightweight and longer lasting than aluminum alloy. Float blade is “broken-in”, curved and balanced to prevent digging. use with threaded handles. Floats will accept any 4-hole adjustable tilting handle bracket. Complete with 4 hole bracket assembly (CC800).

Great finishing tool - extra strong. Ideal for many jobs, flatwork, paving, etc. Broken-in rounded edges with eZY-Tilt® II bracket.

Tool Size

CC736 36”x8”

CC742 42”x8”

CC803 48”x8”

Tool Size

CC044 48”x6”

Tool Size

Wl069 14”x24”

TM

attaches with two thumbscrews. use bull float as groover. Mount as many groovers as needed. Works on 8" wide bull floats.

Tool Bit depth Radius Width

CC940 3/4” 1/4” 1/2”

CC941 1” 1/4” 1/2”

CC942 1-1/2” 1/4” 1/2”

CC943 2” 1/4” 1/2”

BRONZE BULL FLOAT GROOVER BITS EZ-KNEELER


UNIQUE

DESIGN

BUTTON EXTENSION HANDLES

1-3/4" diameter. Swaged Handle.

AluminumButton

SWAGED HANDLES ARE ALUMINUM ANODIZED...PREVENTS HANDS FROM TURNING BLACK CAUSED BY OXIDATION!

Blue Anodized

Tool Size

CC289S 6’ Swaged Handle - Silver anodized




CC336B 6’Swaged Handle - Blue anodized


MULTI-TRACBULL FLOAT GROOVER

Produces a uniform sharp groove in various concrete applications where water drainage and traction are critical.

Cuts Perfect Grooves EVERyTIME!

Cuts clean, sharp grooves every time!

TM

Bottom view

End view


Provides the knees comfortable support and protection. Washable & Chemical resistant. Smooth non marking base. 2” thick rubber cushion.

IDEAL FOR:

• Streets• Highways• Off Ramps • Approach Ramps• Safety Ramps• Bridges

Code description Spacing

CC974 36” x 8” Float 2 ¼ Spacing

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


28 29

Hand F

loats

Hand Flo

ats &

Pry B

ars

MAGNESIUM HAND FLOATS

Superb Floating Action

CONTRACTOR’S CHOICE

MAG FLOATTM

Soft textured ProForm® Handle with special ribbing for that "Great Grip"

Tough durable extru-lite MagnesiumTM blade. Float ends are beveled and the blade is “broken-in” with rounded corners. Precise handle position gives perfect balance.

ProForm® Float Handle

(Patent #6,473,939 B1)(Patent #6,821,468 B2)

MAG FLOAT WITH PROFORM® HANDLE

MAG FLOAT (ROUNDED ENDS)

MAG FLOAT WITH WOOD HANDLE

MAG FLOAT (ROUNDED FRONT & SqUARE BACK)

Tool Size

CF012PF 12”x3-1/4”

CF014PF 14”x3-1/4”

CF016PF 16”x3-1/4”

CF018PF 18”x3-1/4”

CF020PF 20”x3-1/4”

Blade "broken-in"

with beveled ends Blade "broken-in"

with beveled ends

Tool Size

with standard wood handle

CF016 16”x3-1/4”

CF020 20”x3-1/4”

with high lift wood handle

CF014M 14”x3-1/4”

Tough durable extru-lite MagnesiumTM blade. Blades "broken-in" and ready to use. Precise handle position gives this float perfect balance and superb floating action.


Tool Size

CF076PF 16”x3-1/4”

Tool Size

CF078PF 16”x3-1/4”

ProForm® handle

ProForm® handle

FLOAT HOOK

“BIG JOHN” & “LITTLE JOHN”HEAVY-DUTY PRY BARS

WIDE MAG FLOAT WITH PROFORM® HANDLE

Tough durable 3-1/2” wide extru-lite MagnesiumTM blade. Precise handle position gives the float perfect balance and superb floating action. Beveled edges and smooth rounded corners gives this float that perfect “broken-in” feel.

MINI MAG FLOAT WITH PROFORM® HANDLE

extra lightweight magnesium wall float. Great tool for floating in small areas or top of wall between forms. Fitted with ProForm®

handle. Blade measures, 7-1/2”x3-1/2”.

(CF663PF)

Tool Size

CF015PF 16”x3-1/2”

TM

ProForm® Float Handle (Patent #6,473,939 B1)(Patent #6,821,468 B2)

Float hook clips to belt. Holds hand floats and other tools.

(CF011)

Blade "broken-in"

with beveled ends

TWOSIZES!

ALL STEEL

Ideal all purpose tool for prying forms and other construction jobs. Specially designed 3” wide blade angle and hardened steel claw make for easy prying.

Name Tool length Weight

“Big John” Pry Bar GG630 56” 14 lbs.

“little John” Pry Bar GG631 46” 7 lbs.

Strong Tubular Handles!


REPLACEMENT FLOAT HANDLES

(CF266)


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


28 29

Hand F

loats

Hand Flo

ats &

Pry B

ars

MAGNESIUM HAND FLOATS

Superb Floating Action

CONTRACTOR’S CHOICE

MAG FLOATTM

Soft textured ProForm® Handle with special ribbing for that "Great Grip"

Tough durable extru-lite MagnesiumTM blade. Float ends are beveled and the blade is “broken-in” with rounded corners. Precise handle position gives perfect balance.

ProForm® Float Handle

(Patent #6,473,939 B1)(Patent #6,821,468 B2)

MAG FLOAT WITH PROFORM® HANDLE

MAG FLOAT (ROUNDED ENDS)

MAG FLOAT WITH WOOD HANDLE

MAG FLOAT (ROUNDED FRONT & SqUARE BACK)

Tool Size

CF012PF 12”x3-1/4”

CF014PF 14”x3-1/4”

CF016PF 16”x3-1/4”

CF018PF 18”x3-1/4”

CF020PF 20”x3-1/4”

Blade "broken-in"

with beveled ends Blade "broken-in"

with beveled ends

Tool Size

with standard wood handle

CF016 16”x3-1/4”

CF020 20”x3-1/4”

with high lift wood handle

CF014M 14”x3-1/4”



Tool Size

CF076PF 16”x3-1/4”

Tool Size

CF078PF 16”x3-1/4”

ProForm® handle

ProForm® handle

FLOAT HOOK

“BIG JOHN” & “LITTLE JOHN”HEAVY-DUTY PRY BARS

WIDE MAG FLOAT WITH PROFORM® HANDLE

Tough durable 3-1/2” wide extru-lite MagnesiumTM blade. Precise handle position gives the float perfect balance and superb floating action. Beveled edges and smooth rounded corners gives this float that perfect “broken-in” feel.

MINI MAG FLOAT WITH PROFORM® HANDLE

extra lightweight magnesium wall float. Great tool for floating in small areas or top of wall between forms. Fitted with ProForm®

handle. Blade measures, 7-1/2”x3-1/2”.

(CF663PF)

Tool Size

CF015PF 16”x3-1/2”

TM


Float hook clips to belt. Holds hand floats and other tools.

(CF011)

Blade "broken-in"

with beveled ends

TWOSIZES!

ALL STEEL

Ideal all purpose tool for prying forms and other construction jobs. Specially designed 3” wide blade angle and hardened steel claw make for easy prying.

Name Tool length Weight

“Big John” Pry Bar GG630 56” 14 lbs.

“little John” Pry Bar GG631 46” 7 lbs.

Strong Tubular Handles!


REPLACEMENT FLOAT HANDLES

(CF266)


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


30 31

Concr

ete

Rakes

Asp

halt R

akes &

Floor S

crapers

CONCRETE RAKES

ALL ALUMINUM PLACER

Made of strong lightweight aluminum. Blade measures 19-1/2” x 4”. 60” aluminum handle with textured foam grip welded to blade. Heavy-duty aluminum braces for added strength.

Tool Size

CC944 19-1/2”x4”

w/o hook*...assembled*Spreaders assembled ship via oversized rate or truck

Packed (5) per bundle

This well-constructed rake is favored by many concrete tradesmen over straight spreaders for its ease in moving concrete. Comes with 54" wood jam handle.

Packed (5) per carton

CONCRETE RAKEMAGNESIUM OR STEEL

light and super smooth aluminum handle. 60 degree blade keeps tool at just the right angle to spread and level concrete. Heavy-duty aluminum braces for added strength. Blade measures 19-1/2”x4”. 1-3/8” diameter handle.

Tool Size Material

CC010 22-1/2”x5” Steel

CC113 19-1/2”x4” Magnesium

w/ hook

Right Angle Placer ™

60 degree angle

HEAVY-DUTY FLOOR SCRAPERS

MAGNESIUM ASPHALT LUTERIGHT ANGLE PLACER

NOW AVAILABLE WITH 7' HANDLES

Improved asphalt lute has blunt pointed teeth letting asphalt flow through. use smooth side for finishing. Strong two-piece bracket holds blade in place. Magnesium handle.

Tool Head Size Handle Size

GG830 30” Head 7’

FLOOR SCRAPER

Ideal for after work clean up. Scraper blades are firm but flexible. Comes with heavy-duty 5' shovel type wood handle.

T-HANDLE FLOOR SCRAPER

54” long all steel floor scraper. all steel “T” handle for extra leverage. Shaves all kinds of floor coverings on any type of floor. Fitted with 7” replaceable steel blade.

Heavy-duty all steel scraper with weighted head

Fitted with heavy-duty 5' shovel type wood handle

Tool Size Material

CC214 14” blade Floor scraper



CC207 14” Replacement blade



Tool Size Material

GG393 7” blade Floor scraper

GG394 7” Replacement blade



Tool Size

CC965 19-1/2” w/ hook

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


30 31

Concr

ete

Rakes

Asp

halt R

akes &

Floor S

crapers

CONCRETE RAKES

ALL ALUMINUM PLACER

Made of strong lightweight aluminum. Blade measures 19-1/2” x 4”. 60” aluminum handle with textured foam grip welded to blade. Heavy-duty aluminum braces for added strength.

Tool Size

CC944 19-1/2”x4”

w/o hook*...assembled*Spreaders assembled ship via oversized rate or truck

Packed (5) per bundle

This well-constructed rake is favored by many concrete tradesmen over straight spreaders for its ease in moving concrete. Comes with 54" wood jam handle.

Packed (5) per carton

CONCRETE RAKEMAGNESIUM OR STEEL

light and super smooth aluminum handle. 60 degree blade keeps tool at just the right angle to spread and level concrete. Heavy-duty aluminum braces for added strength. Blade measures 19-1/2”x4”. 1-3/8” diameter handle.

Tool Size Material

CC010 22-1/2”x5” Steel

CC113 19-1/2”x4” Magnesium

w/ hook

Right Angle Placer ™

60 degree angle

HEAVY-DUTY FLOOR SCRAPERS

MAGNESIUM ASPHALT LUTERIGHT ANGLE PLACER

NOW AVAILABLE WITH 7' HANDLES

Improved asphalt lute has blunt pointed teeth letting asphalt flow through. use smooth side for finishing. Strong two-piece bracket holds blade in place. Magnesium handle.

Tool Head Size Handle Size

GG830 30” Head 7’

FLOOR SCRAPER

Ideal for after work clean up. Scraper blades are firm but flexible. Comes with heavy-duty 5' shovel type wood handle.

T-HANDLE FLOOR SCRAPER

54” long all steel floor scraper. all steel “T” handle for extra leverage. Shaves all kinds of floor coverings on any type of floor. Fitted with 7” replaceable steel blade.

Heavy-duty all steel scraper with weighted head

Fitted with heavy-duty 5' shovel type wood handle

Tool Size Material







Tool Size Material

GG393 7” blade Floor scraper




Tool Size

CC965 19-1/2” w/ hook

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


32 33

Edgin

g T

ools

, P

last

ic S

tep T

ools

&

Rub B

rick

s

Vib

ratin

g S

creed

EDGING TOOLS

HAND GROOVER ENAR FLOATING SCREED

PLASTIC STEP TOOLS RUB BRICKS

STAINLESS STEEL SAFETy STEP EDGER

Popular on commercial jobs. Cuts four grooves while edging the step. Grooves 3/4” on center. ProForm® Handle.

TAPERED HAND EDGER

Made of heavy gauge stainless steel to work in all angle corners. ProForm® Handle.

SIDEWALK & HIGHWAy EDGERS

ProForm® Handle.

Fluted silicon carbide rub bricks with a contoured handle to minimize fatigue. Preferred by finishers for fast and easy concrete smoothing and dressing down.

STAINLESS

STEEL

Tool Biit Radius

CF112PF 1/4” deep 1/2”

Tool Size Radius

CF151PF Tapered 8” to 3”x4” 3/8”


Tool Size Radius Width

CF599PF 6”x 6” 1/2” 1/2”

Tool Width Radius lip

CF137PF 6” 1/4” 3/8”

CF138PF 6” 3/8” 1/2”

CF175PF 6” 1/2” 5/8”

STAINLESS

STEELSTAINLESS

STEEL

Tool Size lip Radius

NoSe Tool

Pl652 6”x5” 2-1/2” 3/4”

Pl653 6”x5” 2-1/2” 1/2”

Pl654 6”x5” 2-1/2” 1-1/2”

CoVe INSIde Tool

Pl655 6”x5” 5” 3/4”

Pl656 6”x5” 5” 1/2”

Pl657 6”x5” 5” 1-1/2”

Special design for pools will not darken white coat. Heavy nose tool plexiglass.

Nose Tool

Round rub brick with handle. lightweight. Makes grinding easy. use one in each hand. Stone is 1” thick and 6” diameter.

Round

FlutedTool Size Grit

CF283 6”x3”x1” 20

CF282 6”x3”x1” 60

Tool Size Grit

CF270 6”x1” 20

Cove Inside Tool

STAINLESS STEEL HAND GROOVER

VIBRATING UNIT WET SCREED

MADE IN SPAIN

Turned up ends to prevent gouging!

Special polished stainless steel for extra smooth working surface.Turned up ends to prevent gouging. ProForm®

Vibrating concrete screed powdered by Honda Mini 4 Stroke engine (GX35)Magnesium screed bar profile from 1.5 to 3 metres.Screed bar and frame manually separated for transport.Folding handle that reduces the transport volume by 50%.Power of the eccentric weights adjustable in 4 positions in order to adapt to the length of the screed bar and the thickness of the concrete to vibrate.Motor separated from the ground, which prevents splashing and reduces the risk of dirt.Multi-point, adjustable acceleration.Semi-rigid transmission that absorbs horizontal and vertical oscillations.Transmission system with a centrifugal clutch.High performance per surface area and volume of concrete vibrated.

HURACAN-LCode Beam options

HuRa3 1.5m, 2.0m, 2.5m & 3m

STRONG,

LIGHTW

EIGHT

MAGNES

IUM

BLADE


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


32 33

Edgin

g T

ools

, P

last

ic S

tep T

ools

&

Rub B

rick

s

Vib

ratin

g S

creed

EDGING TOOLS

HAND GROOVER ENAR FLOATING SCREED

PLASTIC STEP TOOLS RUB BRICKS

STAINLESS STEEL SAFETy STEP EDGER

Popular on commercial jobs. Cuts four grooves while edging the step. Grooves 3/4” on center. ProForm® Handle.

TAPERED HAND EDGER

Made of heavy gauge stainless steel to work in all angle corners. ProForm® Handle.

SIDEWALK & HIGHWAy EDGERS

ProForm® Handle.

Fluted silicon carbide rub bricks with a contoured handle to minimize fatigue. Preferred by finishers for fast and easy concrete smoothing and dressing down.

STAINLESS

STEEL

Tool Biit Radius

CF112PF 1/4” deep 1/2”

Tool Size Radius



Tool Size Radius Width

CF599PF 6”x 6” 1/2” 1/2”

Tool Width Radius lip

CF137PF 6” 1/4” 3/8”

CF138PF 6” 3/8” 1/2”

CF175PF 6” 1/2” 5/8”

STAINLESS

STEELSTAINLESS

STEEL

Tool Size lip Radius

NoSe Tool

Pl652 6”x5” 2-1/2” 3/4”

Pl653 6”x5” 2-1/2” 1/2”

Pl654 6”x5” 2-1/2” 1-1/2”

CoVe INSIde Tool

Pl655 6”x5” 5” 3/4”

Pl656 6”x5” 5” 1/2”

Pl657 6”x5” 5” 1-1/2”

Special design for pools will not darken white coat. Heavy nose tool plexiglass.

Nose Tool

Round rub brick with handle. lightweight. Makes grinding easy. use one in each hand. Stone is 1” thick and 6” diameter.

Round

FlutedTool Size Grit

CF283 6”x3”x1” 20

CF282 6”x3”x1” 60

Tool Size Grit

CF270 6”x1” 20

Cove Inside Tool

STAINLESS STEEL HAND GROOVER

VIBRATING UNIT WET SCREED

MADE IN SPAIN

Turned up ends to prevent gouging!

Special polished stainless steel for extra smooth working surface.Turned up ends to prevent gouging. ProForm®

Vibrating concrete screed powdered by Honda Mini 4 Stroke engine (GX35)Magnesium screed bar profile from 1.5 to 3 metres.Screed bar and frame manually separated for transport.Folding handle that reduces the transport volume by 50%.Power of the eccentric weights adjustable in 4 positions in order to adapt to the length of the screed bar and the thickness of the concrete to vibrate.Motor separated from the ground, which prevents splashing and reduces the risk of dirt.Multi-point, adjustable acceleration.Semi-rigid transmission that absorbs horizontal and vertical oscillations.Transmission system with a centrifugal clutch.High performance per surface area and volume of concrete vibrated.

HURACAN-LCode Beam options

HuRa3 1.5m, 2.0m, 2.5m & 3m

STRONG,

LIGHTW

EIGHT

MAGNES

IUM

BLADE


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


34 35

Trow

els

& F

loats

Trow

els &

Floats

ANCORA FLOATS AND TROWELS - MADE IN ITALY ANCORA FLOATS AND TROWELS - MADE IN ITALY

Tool Size

1817603 240 x 120mm

1817606 280 x 140mm

Tool Size

1817903 350 x 70 x 40

Tool Size

1807503 280 x 130

Tool Size

1814360 280 x 120

1814372 280 x 120

1814378 360 x 120

Tool Size

1814794 280 x 120

1814795 280 x 120

1814798 360 x 120

ORANGE SPONGE TROWEL - FINE SOFT TExTURE

orange rubber trowel. Fine texture. Rubber thickness 20mm. Polyurethane support

ORANGE CORNER SPONGE

Polyurethane Support trowel and orange rubber. Triangle secon.

PLASTIC TExTURE FINISH TROWEL

Non marking blade. Black plasc support and handle. Black thickness 2.5mm

FINISHING TROWEL CARBON STEEL

Riveted Sintesi Steel trowel. Rubber handle (1814372 extra long support)


Riveted Stainless Steel trowel. Rubber Handle (1814795 extra long support)

876

817/P

Tool Size

1814403 6 x 170

8 x 170

10 x 170

12 x 170

Tool Size

2803903 152

2803906 178

2803909 203

2803915 228

2803921 254

Tool Size

2802703 160

2802706 180

2802712 200

Tool Size

1814501 40 x 60 x 60

1814503 70 x 60 x 60

Tool Size

1814801 40 x 60 x 60

1814803 70 x 60 x 60

Tool Size

2803715 159

Tool Size

2901503 120

Tool Size

2901803 120

Tool Size

2906006 150 x 51

2906015 200 x 51

Tool Size

3600000 220 x 140

3600011 140 x 280

3600005 400 x 250

MOTOR SMOOTHING TOOL

Rectangular secon joint filler.

963 GAUGING TROWEL

Sentesi round tip trowel. Soft rubber grip handle. Flexible hardened steel blade.

946 SqUARE FRONT TROWEL

Sentesi square front trowel. Soft rubber grip handle. Flexible hardened steel blade.

ExTERNAL CORNER TROWEL

Trowel for external sharp angles.

INTERNAL CORNER TROWEL

Trowel for internal sharp angles.

960 POINNG TROWEL

Sentesi square tip trowel. Soft rubber grip handle. Flexible hardened steel blade.

985 CATS TONGUE TROWEL

Sentesi pointing trowel. Soft rubber grip handle. Flexible hardened steel blade.

986 OLIVE LEAF TROWEL


990 MARGIN TROWEL

Sentesi margin trowel. Soft rubber grip handle. Flexible hardened steel blade.

POLyURETHANE TROWEL

light weight polyurethane float. one piece mould

851

963

946

854/a

960

985

1901

845

879

845/1

853/a

986

990


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


34 35

Trow

els

& F

loats

Trow

els &

Floats

ANCORA FLOATS AND TROWELS - MADE IN ITALY ANCORA FLOATS AND TROWELS - MADE IN ITALY

Tool Size

1817603 240 x 120mm

1817606 280 x 140mm

Tool Size

1817903 350 x 70 x 40

Tool Size

1807503 280 x 130

Tool Size

1814360 280 x 120

1814372 280 x 120

1814378 360 x 120

Tool Size

1814794 280 x 120

1814795 280 x 120

1814798 360 x 120

ORANGE SPONGE TROWEL - FINE SOFT TExTURE

orange rubber trowel. Fine texture. Rubber thickness 20mm. Polyurethane support

ORANGE CORNER SPONGE

Polyurethane Support trowel and orange rubber. Triangle secon.

PLASTIC TExTURE FINISH TROWEL

Non marking blade. Black plasc support and handle. Black thickness 2.5mm


Riveted Sintesi Steel trowel. Rubber handle (1814372 extra long support)


Riveted Stainless Steel trowel. Rubber Handle (1814795 extra long support)

876

817/P

Tool Size

1814403 6 x 170

8 x 170

10 x 170

12 x 170

Tool Size

2803903 152

2803906 178

2803909 203

2803915 228

2803921 254

Tool Size

2802703 160

2802706 180

2802712 200

Tool Size

1814501 40 x 60 x 60

1814503 70 x 60 x 60

Tool Size

1814801 40 x 60 x 60

1814803 70 x 60 x 60

Tool Size

2803715 159

Tool Size

2901503 120

Tool Size

2901803 120

Tool Size

2906006 150 x 51

2906015 200 x 51

Tool Size

3600000 220 x 140

3600011 140 x 280

3600005 400 x 250

MOTOR SMOOTHING TOOL

Rectangular secon joint filler.

963 GAUGING TROWEL

Sentesi round tip trowel. Soft rubber grip handle. Flexible hardened steel blade.

946 SqUARE FRONT TROWEL

Sentesi square front trowel. Soft rubber grip handle. Flexible hardened steel blade.

ExTERNAL CORNER TROWEL

Trowel for external sharp angles.

INTERNAL CORNER TROWEL

Trowel for internal sharp angles.

960 POINNG TROWEL

Sentesi square tip trowel. Soft rubber grip handle. Flexible hardened steel blade.

985 CATS TONGUE TROWEL


986 OLIVE LEAF TROWEL


990 MARGIN TROWEL

Sentesi margin trowel. Soft rubber grip handle. Flexible hardened steel blade.

POLyURETHANE TROWEL

light weight polyurethane float. one piece mould

851

963

946

854/a

960

985

1901

845

879

845/1

853/a

986

990


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


36 37

Bri

ck T

ools

& A

ccess

ori

es B

rick To

ols &

Acce

ssorie

s

BT BRICK CARRIER

TOP STEADY

BT ROLLER RAKER

BT DORI BLOCK CAVITY CLEANER

DOOR GAUGES

BRICK IRONERS

BRICK JOINTERS

description Code

Veneer - nail on ToP

Full brick - clamp to outside wall ToPI

Replacement Parts

G Bracket only ToPG

Nail Bracket only ToPN

Internal G Bracket only ToPGI

description Code

BT Brick Carrier BC

description Code

door Guage dG

door Guage (Wa) dGWa

description Code

Z Ironer 5/8 (16mm) IZ

Z Ironer 1/2 (12mm IS12

Spoon Jointer 1/2 x 5/8 SJ

description Code

Ironer 19mm (3/4”) I34




Ironer 8mm Square (5/16”) I516

description Code

long Poly Wheel Raker RPl

Short Poly Wheel Raker RP

Steel Wheel Raker RS

Replacement Parts

Poly Wheels & Bushes (set) RWP

Steel Wheels & Rivets (set) RWS

Nail for Raker RN

description Code

Cavity Cleaner CC

description Code

doRI BloCK dB

doRI BloCK loNG SIded 50MM dBl50


a great time saving tool.lifts six bricks at a time.

Heavy guage steel construction.

Zinc coat finish.

BT dooR GauGeS

SolId aNd CoMFoRTaBle To uSe.

Top clamps (steady for profiles).

Complete assembly.

ToPN

ToPG

ToPG

ToPGI

ToPGI

ToPN

ToP

ToPI

(Veneer - nail on)

(Full brick - clamp to outside wall)

Poly Wheel and Steel Wheel Rakers.

DOOR GAUGE

For string line use with steel door frame.

DOOR GAUGE (WA)

Suitable for Western australian door Frame Profiles. For string line use with steel door frame.

dooR GauGe dooR GauGe (Wa)

Ironer 19mm

Ironer 16mm

Ironer 12mm

Ironer 10mm

Ironer 8mm Square

Z Ironer 5/8 Z Ironer 1/2 Spoon Jointer 1/2 x 5/8


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


36 37

Bri

ck T

ools

& A

ccess

ori

es B

rick To

ols &

Acce

ssorie

s

BT BRICK CARRIER

TOP STEADY

BT ROLLER RAKER

BT DORI BLOCK CAVITY CLEANER

DOOR GAUGES

BRICK IRONERS

BRICK JOINTERS

description Code

Veneer - nail on ToP

Full brick - clamp to outside wall ToPI

Replacement Parts

G Bracket only ToPG

Nail Bracket only ToPN

Internal G Bracket only ToPGI

description Code

BT Brick Carrier BC

description Code

door Guage dG

door Guage (Wa) dGWa

description Code

Z Ironer 5/8 (16mm) IZ

Z Ironer 1/2 (12mm IS12

Spoon Jointer 1/2 x 5/8 SJ

description Code





Ironer 8mm Square (5/16”) I516

description Code

long Poly Wheel Raker RPl

Short Poly Wheel Raker RP

Steel Wheel Raker RS

Replacement Parts

Poly Wheels & Bushes (set) RWP

Steel Wheels & Rivets (set) RWS

Nail for Raker RN

description Code

Cavity Cleaner CC

description Code

doRI BloCK dB



a great time saving tool.lifts six bricks at a time.

Heavy guage steel construction.

Zinc coat finish.

BT dooR GauGeS

SolId aNd CoMFoRTaBle To uSe.

Top clamps (steady for profiles).

Complete assembly.

ToPN

ToPG

ToPG

ToPGI

ToPGI

ToPN

ToP

ToPI

(Veneer - nail on)

(Full brick - clamp to outside wall)

Poly Wheel and Steel Wheel Rakers.

DOOR GAUGE

For string line use with steel door frame.

DOOR GAUGE (WA)

Suitable for Western australian door Frame Profiles. For string line use with steel door frame.

dooR GauGe dooR GauGe (Wa)

Ironer 19mm

Ironer 16mm

Ironer 12mm

Ironer 10mm

Ironer 8mm Square

Z Ironer 5/8 Z Ironer 1/2 Spoon Jointer 1/2 x 5/8


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


38 39

Bri

ck T

ools

& A

ccess

ori

es

Brick

, Pave

r & B

lock

Saw

s

SLIDING CLAMP

PROFILE CLAMPS

NAIL ON G CLAMP

UNIT PROFILE JACK TIMBER CLAMP

INTERNAL SPIKE

DEAN 05 CLAMP

BT PAVER SAW

description Code

BT electric Brick Saw BSaW

BT Petrol Brick Saw (Honda GX200) BSaWHdescription Code

large 560mm (22”) GCl

Small 330mm (13”) GClSH

Replacement Slider GClS

description Code

Medium external Clamp GCM

Medium Internal Clamp GCMI

Small external Clamp GCS

Small Internal Clamp GCSI

description Code

Nail on G Clamp GCN

description Code

unit Profile Jack uPJ

description Code

Timber Clamp TC

description Code

Internal Spike SPI

description Code

Brick Profile Clamp deaN05

BT BRICK SAW

G Clamps.

Suits half brick, full brick and half block.

Slips into 50mm profiles. Holds two timbers to profile pole

Medium external Clamp

Medium Internal Clamp

Small external Clamp

Small Internal Clamp

For securing profiles to internal corners

Top steady to hold firm profile for full brick.

1700W single phase motor or Honda GX200Mobile stand - one person can load.Thumb water control - less mess & no waste.unrestricted view.Foot control.Mitre guide - heavy duty and fully adjustable.Heavy duty long lasting bearings.

dimensions:Work table H-818mm, W-680mm, l-1050mmWeight 85kgTray Width 425mm, depth 300mmdepth of Cut 14”/355mm Blade = 115mm 16”/400mm Blade = 145mmlength of Cut 14”/355mm Blade = 490mm 16”/400mm Blade = 500mm

9HP HoNda Petrol engine, or 2.2kw Single Phase electric, or 4.0kw 3 Phase electric. 2 piece stand for ease of transportation/elevator access.unrestricted view.Foot control.Galvanised Body and Zinc Coat Saw.Heavy duty long lasting bearings.

dimensions:Work table H-885mm, W-550mm, l-1230mmWeight electric 143kgTray Width-560mm, depth-355mmdepth of Cut 20”/510mm Blade = 200mm

description Code

Paver Saw 500 - electric engine 1700w BSaW500

Paver Saw 500 - Honda Petrol engine GX200 BSaWH500

description Code

9HP Petrol engine BlSaWP

2.2Kw Single Phase electric BlSaWSP

4.0Kw 3 Phase electric BlSaW3P

(Single & 3 Phase available)

BLOCK SAW - PETROL OR ELECTRIC

Cuts paver 600 x 600 x 50mm14 “ Blade capacity standardMobile Stand - one person can loadThumb water control - less mess & no wasteunrestricted viewFoot ControlMitre Guide - heavy duty & fully adjustableHeavy duty long lasting bearingsMade in australia for australian conditionsFull 12 month warranty

dimensionsl - 1260mm, W - 660mm, H - 1400mm, W - 95kg

Carriage Sizelength - 465mm Width - 620mmdepth of Cut - 125mmlength of Cut - 600mm


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


38 39

Bri

ck T

ools

& A

ccess

ori

es

Brick

, Pave

r & B

lock

Saw

s

SLIDING CLAMP

PROFILE CLAMPS

NAIL ON G CLAMP

UNIT PROFILE JACK TIMBER CLAMP

INTERNAL SPIKE

DEAN 05 CLAMP

BT PAVER SAW

description Code

BT electric Brick Saw BSaW

BT Petrol Brick Saw (Honda GX200) BSaWHdescription Code

large 560mm (22”) GCl

Small 330mm (13”) GClSH

Replacement Slider GClS

description Code

Medium external Clamp GCM

Medium Internal Clamp GCMI

Small external Clamp GCS

Small Internal Clamp GCSI

description Code

Nail on G Clamp GCN

description Code

unit Profile Jack uPJ

description Code

Timber Clamp TC

description Code

Internal Spike SPI

description Code

Brick Profile Clamp deaN05

BT BRICK SAW

G Clamps.

Suits half brick, full brick and half block.

Slips into 50mm profiles. Holds two timbers to profile pole

Medium external Clamp

Medium Internal Clamp

Small external Clamp

Small Internal Clamp

For securing profiles to internal corners

Top steady to hold firm profile for full brick.

1700W single phase motor or Honda GX200Mobile stand - one person can load.Thumb water control - less mess & no waste.unrestricted view.Foot control.Mitre guide - heavy duty and fully adjustable.Heavy duty long lasting bearings.

dimensions:Work table H-818mm, W-680mm, l-1050mmWeight 85kgTray Width 425mm, depth 300mmdepth of Cut 14”/355mm Blade = 115mm 16”/400mm Blade = 145mmlength of Cut 14”/355mm Blade = 490mm 16”/400mm Blade = 500mm

9HP HoNda Petrol engine, or 2.2kw Single Phase electric, or 4.0kw 3 Phase electric. 2 piece stand for ease of transportation/elevator access.unrestricted view.Foot control.Galvanised Body and Zinc Coat Saw.Heavy duty long lasting bearings.

dimensions:Work table H-885mm, W-550mm, l-1230mmWeight electric 143kgTray Width-560mm, depth-355mmdepth of Cut 20”/510mm Blade = 200mm

description Code

Paver Saw 500 - electric engine 1700w BSaW500

Paver Saw 500 - Honda Petrol engine GX200 BSaWH500

description Code

9HP Petrol engine BlSaWP

2.2Kw Single Phase electric BlSaWSP

4.0Kw 3 Phase electric BlSaW3P

(Single & 3 Phase available)

BLOCK SAW - PETROL OR ELECTRIC

Cuts paver 600 x 600 x 50mm14 “ Blade capacity standardMobile Stand - one person can loadThumb water control - less mess & no wasteunrestricted viewFoot ControlMitre Guide - heavy duty & fully adjustableHeavy duty long lasting bearingsMade in australia for australian conditionsFull 12 month warranty

dimensionsl - 1260mm, W - 660mm, H - 1400mm, W - 95kg

Carriage Sizelength - 465mm Width - 620mmdepth of Cut - 125mmlength of Cut - 600mm


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


40 41

Rein

forc

ing T

ools

CH

AP

IN IN

DU

STR

IAL R

AN

GE

NIPPERS & PINCERS

THE WIRE TWISTER IDEAL REEL

SP-1979 SPRAY SP-61800 SPRAY

description Code

Spray (3.5G/13.2ltrs) SP-1949

description Code


description Code


description Code


Name description Code

Nozzle Industrial Brass Fan Tip Nozzle 6-5797

extension Wand 24” Industrial Brass Male exte 6-7703

Sprayer Handle Industrial Brass Shut-off W/F 6-6062

Hose 48” Industrial Hose w/Fitting 6-6091

Repair Kit Seal and Gasket Kit 6-4627

ergo Pump assy 14 in/35.6cm Brass Pump Barrel asse 3-0106-5

other Parts extension Clip 1-2619-1

Carry Strap with Pad 6-3337



extension Wand 24” Industrial Brass Female ex 6-7703



Repair Kit Seal and Gasket Kit with Viton 6-4629






extension Wand 18” Industrial Brass extension 6-7742

Sprayer Handle Industrial Brass Shut-off 6-1898

Hose 48” Nylon Reinforced Hose 6-6141


Pump Rod assy 11 in/28cm Pump Rod assembly 3-1826

Pump Barrel assy 11 in/28cm Poly Pump Barrel asse 3-1825

Relief Valve assy Relief Valve 6-4645




Nozzle RePl Pl adjustable Nozzel w/ HGR Bag 6-8093

extension Wand RePl Spray Tube 20” w/ HGR Bag 6-8101

Sprayer Handle RePl Shut off Valve w/ HGR Bag 6-8103

Hose RePl Hose 48in w/ HGR Bag 6-8105

Repair Kit Na

description Code

end Cutting Nipper 180mm 131-12-180


description Code

KX Tower Pincers 230mm 115-12-230-KX2


description Code

Tower Pincers 220mm 115-12-220



description Code

The Wire Twister 90016

description Code

Tie Wire Id309


accurately machined spring return spiral spindle with wear resistant bronze sleeve.

High Tensile Ratchet

Heavy duty, Comfort Grip Handle

leather Bumper

end Cutting Nipper KX Tower Pincer

Tower Pincers

Highest quality die-cast aluminum - all steel components offer longer life.

Holds 14 to 18 gauge black annealed tie wire, copper-covered wire, monel wire, soft galvanized wire or stainless steel wire.

Weighs only 0.9kgs.

Industrial standard sprayer. Heavy duty steel, tripoxy coated for triple protection against corrosion, rust & damage. VIToN seal equipped with large open head. Brass wand & carry strap included.

Premium heavy duty industrial sprayer. Heavy duty steel, tripoxy coated for triple against corrosion, rust & damaged. Hammer tone exterior finish. VIToN seal equipped with large open head. Crush resistant brass wand, internal filter and carry strap included. (Model SP-1999 available with air compressor connection)

Industrial poly sprayer. Wide mouth for no mess filling & cleaning. VIToN seal equipped. Brass wand & carry strap included.

ProSeries back pack sprayer. large pump for pressurising quickly with less pumping. Internal 4 position pressure spray valve. Padded carry straps. Pump handle for adjustable for right or left handed use.


MaDE in Usa

MaDE in GERManY

MaDE in GERManY

MaDE in Usa

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


40 41

Rein

forc

ing T

ools

CH

AP

IN IN

DU

STR

IAL R

AN

GE

NIPPERS & PINCERS

THE WIRE TWISTER IDEAL REEL


description Code


description Code


description Code


description Code




extension Wand 24” Industrial Brass Male exte 6-7703









extension Wand 24” Industrial Brass Female ex 6-7703









extension Wand 18” Industrial Brass extension 6-7742

Sprayer Handle Industrial Brass Shut-off 6-1898

Hose 48” Nylon Reinforced Hose 6-6141


Pump Rod assy 11 in/28cm Pump Rod assembly 3-1826

Pump Barrel assy 11 in/28cm Poly Pump Barrel asse 3-1825

Relief Valve assy Relief Valve 6-4645




Nozzle RePl Pl adjustable Nozzel w/ HGR Bag 6-8093

extension Wand RePl Spray Tube 20” w/ HGR Bag 6-8101

Sprayer Handle RePl Shut off Valve w/ HGR Bag 6-8103

Hose RePl Hose 48in w/ HGR Bag 6-8105

Repair Kit Na

description Code



description Code



description Code




description Code

The Wire Twister 90016

description Code

Tie Wire Id309


accurately machined spring return spiral spindle with wear resistant bronze sleeve.

High Tensile Ratchet

Heavy duty, Comfort Grip Handle

leather Bumper

end Cutting Nipper KX Tower Pincer

Tower Pincers

Highest quality die-cast aluminum - all steel components offer longer life.

Holds 14 to 18 gauge black annealed tie wire, copper-covered wire, monel wire, soft galvanized wire or stainless steel wire.

Weighs only 0.9kgs.

Industrial standard sprayer. Heavy duty steel, tripoxy coated for triple protection against corrosion, rust & damage. VIToN seal equipped with large open head. Brass wand & carry strap included.

Premium heavy duty industrial sprayer. Heavy duty steel, tripoxy coated for triple against corrosion, rust & damaged. Hammer tone exterior finish. VIToN seal equipped with large open head. Crush resistant brass wand, internal filter and carry strap included. (Model SP-1999 available with air compressor connection)

Industrial poly sprayer. Wide mouth for no mess filling & cleaning. VIToN seal equipped. Brass wand & carry strap included.

ProSeries back pack sprayer. large pump for pressurising quickly with less pumping. Internal 4 position pressure spray valve. Padded carry straps. Pump handle for adjustable for right or left handed use.


MaDE in Usa

MaDE in GERManY

MaDE in GERManY

MaDE in Usa

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


42 43

CH

AP

IN I

ND

US

TRIA

L &

FA

RM

& F

IELD

CH

AP

IN FA

RM

& FIE

LD R

AN

GE

description Code

Spray - 1420ml SP-1003

description Code

Spray (4.0G/15.1ltr) SP-62000

description Code

B/Pack (4.0G/15.1ltrs) SP-61400


Nozzle Poly adjustable Cone Pattern N 3-1802

Repair Kit Valve Kit 3-1853

other Parts Replacement Pin 1-3576


Nozzle Repl Pl adj Nozzle W Hgr Bag 6-8093

extension Wand Repl Spray Tube 20 W Hgr Bag 6-8101

Sprayer Handle Repl Shut-off assembly 6-8138

Hose 48” Repl Hose W Hgr Bag 6-8105

SP-1003 HAND SPRAYSP-62000 CHAPIN PROF POLY KNAPSACK CHAPIN POLY BACKPACK

Farm & Field hand held pump spray.Fitted with adjustable cone nozzle.

Tree/Turf professional backpack sprayer for weed control, pest control, and fertilizers.

Proseries backpack sprayer. large pump makes pressurising easy. Padded carrying straps – adjustable. easy operation. Multi-use nozzles included

4” FIlTeRed oPeNING

PReSSuRe GuaGe FoR MaXIMuM eFFICIeNCY

60psi 15psi

45psi 30psi

PReSSuRe CoNTRol 15-60 PSI

IN-TaNK ReMoVaBle FIlTeR

adJuSTaBle CoNe aNd FaN NoZZle

SP-2803E SPRAYSP-19069SP-19049 SP-21250 SPRAY

description Code

Poly Spray (3.0G/11.4ltrs) SP-2803e

description Code



Nozzle Poly adjustable Cone Nozzle 6-6003

extension Wand 18 Poly extension with Viton 6-7749

Sprayer Handle Poly Shut-off 6-4626

Hose Poly Shut-off 6-4626


other Parts Carry Strap with Pad 6-3337



extension Wand 24” Industrial Brass Male ex 6-7703

Sprayer Handle Kit Repl Shut off 301219 extr 6-5380

Hose Heavy duty 48” Industrial Hose 6-6092

Repair Kit Kit oh extreme W Blister 6-4646








Nozzle Brass adjustable Cone Nozzle 6-6000

extension Wand 18” Premier Brass extension 6-7711

Sprayer Handle Premier epoxy Coated Zinc Shut 6-1866

Hose 42” 106 7 cm Hose with Con 6-6136


Farm & Field Poly Sprayer Plus. Wide Mouth Filler. adjustable nozzle spray cone to stream. ergo Handle. easy to clean poly shut-off requires no tools

Stainless Steel Xtreme Industrial Concrete Sprayer.For up to 100% acetone, Naptha, Xylene & Toluene concentrations. extreme Viton Seals fitted.

Xtreme Industrial Concrete Sprayer For up to 30% acetone, Naptha, Xylene & Toluene concentrations. extreme Viton Seals fitted. Steel tank tripoxy coated.

Professional Farm & Field Viton Sprayer. Fitted with Viton Seals.Quality Poly Construction. 18” Premier Brass Sprayer handle and wand. adjustable Brass Cone Nozzle.

description Code

Steel Coated (3.5G/13.2ltrs) SP-19049

description Code

S/Steel (3.5G/13.2ltrs) SP-19069



Repl Flat Spray Jet W Hgr Bag 6-8096

Repl Brass adj Nozzle 6-8122

Backpack Complete Nozzle Kit F 301478


Repl Wand Clips 6-8152


Hose Repl Hose 48in W Hgr Bag 6-8105

Repair Kit Repl Piston Pump Repair Kit 6-8180

Repl Shut-off Repair Kit 6-8185

Repl o-Ring Kit 6-8153


MaDE in UsaMaDE in Usa

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


42 43

CH

AP

IN I

ND

US

TRIA

L &

FA

RM

& F

IELD

CH

AP

IN FA

RM

& FIE

LD R

AN

GE

description Code

Spray - 1420ml SP-1003

description Code

Spray (4.0G/15.1ltr) SP-62000

description Code

B/Pack (4.0G/15.1ltrs) SP-61400


Nozzle Poly adjustable Cone Pattern N 3-1802

Repair Kit Valve Kit 3-1853

other Parts Replacement Pin 1-3576





Hose 48” Repl Hose W Hgr Bag 6-8105

SP-1003 HAND SPRAYSP-62000 CHAPIN PROF POLY KNAPSACK CHAPIN POLY BACKPACK

Farm & Field hand held pump spray.Fitted with adjustable cone nozzle.

Tree/Turf professional backpack sprayer for weed control, pest control, and fertilizers.

Proseries backpack sprayer. large pump makes pressurising easy. Padded carrying straps – adjustable. easy operation. Multi-use nozzles included

4” FIlTeRed oPeNING

PReSSuRe GuaGe FoR MaXIMuM eFFICIeNCY

60psi 15psi

45psi 30psi

PReSSuRe CoNTRol 15-60 PSI

IN-TaNK ReMoVaBle FIlTeR

adJuSTaBle CoNe aNd FaN NoZZle

SP-2803E SPRAYSP-19069SP-19049 SP-21250 SPRAY

description Code

Poly Spray (3.0G/11.4ltrs) SP-2803e

description Code



Nozzle Poly adjustable Cone Nozzle 6-6003

extension Wand 18 Poly extension with Viton 6-7749

Sprayer Handle Poly Shut-off 6-4626

Hose Poly Shut-off 6-4626


other Parts Carry Strap with Pad 6-3337














Nozzle Brass adjustable Cone Nozzle 6-6000

extension Wand 18” Premier Brass extension 6-7711

Sprayer Handle Premier epoxy Coated Zinc Shut 6-1866

Hose 42” 106 7 cm Hose with Con 6-6136


Farm & Field Poly Sprayer Plus. Wide Mouth Filler. adjustable nozzle spray cone to stream. ergo Handle. easy to clean poly shut-off requires no tools

Stainless Steel Xtreme Industrial Concrete Sprayer.For up to 100% acetone, Naptha, Xylene & Toluene concentrations. extreme Viton Seals fitted.

Xtreme Industrial Concrete Sprayer For up to 30% acetone, Naptha, Xylene & Toluene concentrations. extreme Viton Seals fitted. Steel tank tripoxy coated.

Professional Farm & Field Viton Sprayer. Fitted with Viton Seals.Quality Poly Construction. 18” Premier Brass Sprayer handle and wand. adjustable Brass Cone Nozzle.

description Code

Steel Coated (3.5G/13.2ltrs) SP-19049

description Code

S/Steel (3.5G/13.2ltrs) SP-19069



Repl Flat Spray Jet W Hgr Bag 6-8096

Repl Brass adj Nozzle 6-8122

Backpack Complete Nozzle Kit F 301478


Repl Wand Clips 6-8152


Hose Repl Hose 48in W Hgr Bag 6-8105

Repair Kit Repl Piston Pump Repair Kit 6-8180

Repl Shut-off Repair Kit 6-8185

Repl o-Ring Kit 6-8153


MaDE in UsaMaDE in Usa

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


44www.master f inish.com.au

A.G.PULIE PTY LTDA.C.N. 000 864 308

6 Wentworth St, Granville N.S.W 2142. P.O. Box 309, Granville N.S.W 2142Tel: (02) 9637 9011 Fax: (02) 9682 1269 Email: [email protected]

BRISBANEPH: (07) 3893 2877

MELBOURNEPH: (03) 9460 5700

PERTHPH: (08) 9350 6255

ADELAIDEPH: (08) 8326 2336

Date post:	14-Mar-2016
Category:	Documents
Upload:	cl-tool-centre-pty-ltd
View:	299 times
Download:	12 times

Masterfinish Catalogue c&l

Documents