MATERIAL SAFETY DATA SHEET SECTION 1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION MATHESON TRI-GAS, INC. EMERGENCY CONTACT: 959 ROUTE 46 EAST CHEMTREC 1-800-424-9300 PARSIPPANY, NEW JERSEY 07054-0624 INFORMATION CONTACT: 973-257-1100 SUBSTANCE: NITROUS OXIDE TRADE NAMES/SYNONYMS: MTG MSDS 70; DINITROGEN MONOXIDE; FACTITIOUS AIR; LAUGHING GAS; HYPONITROUS ACID ANHYDRIDE; NITROGEN (I) OXIDE; NITROGEN OXIDE; STCC 4904340; UN 1070; NITROGEN OXIDE (N2O); DINITROGEN OXIDE; NITROUS OXIDE, COMPRESSED; N2O; MAT16790; RTECS QX1350000 CHEMICAL FAMILY: inorganic, gas CREATION DATE: Jan 24 1989 REVISION DATE: Mar 19 2003 SECTION 2 COMPOSITION, INFORMATION ON INGREDIENTS COMPONENT: NITROUS OXIDE CAS NUMBER: 10024-97-2 PERCENTAGE: 100.0 SECTION 3 HAZARDS IDENTIFICATION NFPA RATINGS (SCALE 0-4): HEALTH=1 FIRE=0 REACTIVITY=0 EMERGENCY OVERVIEW: COLOR: colorless PHYSICAL FORM: gas ODOR: sweet odor MAJOR HEALTH HAZARDS: potentially fatal if inhaled, central nervous system depression, difficulty breathing PHYSICAL HAZARDS: Containers may rupture or explode if exposed to heat. POTENTIAL HEALTH EFFECTS: INHALATION: SHORT TERM EXPOSURE: nausea, vomiting, symptoms of drunkenness, hyperactivity or drowsiness, hearing loss, suffocation, death
Transcript
MATERIAL SAFETY DATA SHEET
SECTION 1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
MATHESON TRI-GAS, INC. EMERGENCY CONTACT: 959 ROUTE 46 EAST CHEMTREC 1-800-424-9300 PARSIPPANY, NEW JERSEY 07054-0624 INFORMATION CONTACT: 973-257-1100 SUBSTANCE: NITROUS OXIDE TRADE NAMES/SYNONYMS: MTG MSDS 70; DINITROGEN MONOXIDE; FACTITIOUS AIR; LAUGHING GAS; HYPONITROUS ACID ANHYDRIDE; NITROGEN (I) OXIDE; NITROGEN OXIDE; STCC 4904340; UN 1070; NITROGEN OXIDE (N2O); DINITROGEN OXIDE; NITROUS OXIDE, COMPRESSED; N2O; MAT16790; RTECS QX1350000 CHEMICAL FAMILY: inorganic, gas CREATION DATE: Jan 24 1989 REVISION DATE: Mar 19 2003
SECTION 2 COMPOSITION, INFORMATION ON INGREDIENTS
COMPONENT: NITROUS OXIDE CAS NUMBER: 10024-97-2 PERCENTAGE: 100.0
SECTION 3 HAZARDS IDENTIFICATION
NFPA RATINGS (SCALE 0-4): HEALTH=1 FIRE=0 REACTIVITY=0 EMERGENCY OVERVIEW: COLOR: colorless PHYSICAL FORM: gas ODOR: sweet odor MAJOR HEALTH HAZARDS: potentially fatal if inhaled, central nervous system depression, difficulty breathing PHYSICAL HAZARDS: Containers may rupture or explode if exposed to heat. POTENTIAL HEALTH EFFECTS: INHALATION: SHORT TERM EXPOSURE: nausea, vomiting, symptoms of drunkenness, hyperactivity or drowsiness, hearing loss, suffocation, death
LONG TERM EXPOSURE: tingling sensation, impotence, reproductive effects SKIN CONTACT: SHORT TERM EXPOSURE: blisters, frostbite LONG TERM EXPOSURE: no information is available EYE CONTACT: SHORT TERM EXPOSURE: frostbite, blurred vision LONG TERM EXPOSURE: no information is available INGESTION: SHORT TERM EXPOSURE: frostbite LONG TERM EXPOSURE: no information is available
SECTION 4 FIRST AID MEASURES
INHALATION: If adverse effects occur, remove to uncontaminated area. Give artificial respiration if not breathing. If breathing is difficult, oxygen should be administered by qualified personnel. Get immediate medical attention. SKIN CONTACT: If frostbite or freezing occur, immediately flush with plenty of lukewarm water (105-115 F; 41-46 C). DO NOT USE HOT WATER. If warm water is not available, gently wrap affected parts in blankets. Get immediate medical attention. EYE CONTACT: Flush eyes with plenty of water. INGESTION: If a large amount is swallowed, get medical attention. NOTE TO PHYSICIAN: For inhalation, consider oxygen.
SECTION 5 FIRE FIGHTING MEASURES
FIRE AND EXPLOSION HAZARDS: Negligible fire hazard. Containers may rupture or explode if exposed to heat. Gas/air mixtures are explosive. EXTINGUISHING MEDIA: carbon dioxide, regular dry chemical Large fires: Use regular foam or flood with fine water spray. FIRE FIGHTING: Move container from fire area if it can be done without risk. Cool containers with water spray until well after the fire is out. Stay away from the ends of tanks. For fires in cargo or storage area: Cool containers with water from unmanned hose holder or monitor nozzles until well after fire is out. If this is impossible then take the following precautions: Keep unnecessary people away, isolate hazard area and deny entry. Let the fire burn. Use extinguishing agents appropriate for surrounding fire. Cool containers with water spray until well after the fire is out. Apply water from a protected location or from a safe distance. Do not get water directly on material. Reduce vapors with water spray. Avoid inhalation of material or combustion by-products. Stay upwind and keep out of low areas. Consider downwind evacuation if material is leaking.
SECTION 6 ACCIDENTAL RELEASE MEASURES
OCCUPATIONAL RELEASE: Stop leak if possible without personal risk. Avoid contact with combustible materials. Keep unnecessary people away, isolate hazard area and deny entry. Ventilate closed spaces before entering.
SECTION 7 HANDLING AND STORAGE
STORAGE: Store and handle in accordance with all current regulations and standards. Subject to storage regulations: U.S. OSHA 29 CFR 1910.105. Keep separated from incompatible substances.
SECTION 8 EXPOSURE CONTROLS, PERSONAL PROTECTION
EXPOSURE LIMITS: NITROUS OXIDE: 50 ppm ACGIH TWA 25 ppm (46 mg/m3) NIOSH recommended TWA (halogenated anesthetic gas) VENTILATION: Provide local exhaust ventilation system. Ensure compliance with applicable exposure limits. EYE PROTECTION: For the gas: Eye protection not required, but recommended. For the liquid: Wear splash resistant safety goggles. Contact lenses should not be worn. Provide an emergency eye wash fountain and quick drench shower in the immediate work area. CLOTHING: For the gas: Protective clothing is not required. For the liquid: Wear appropriate protective, cold insulating clothing. GLOVES: Wear insulated gloves. RESPIRATOR: Under conditions of frequent use or heavy exposure, respiratory protection may be needed. Respiratory protection is ranked in order from minimum to maximum. Consider warning properties before use. Any supplied-air respirator with a full facepiece that is operated in a pressure-demand or other positive-pressure mode. Any self-contained breathing apparatus that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode. For Unknown Concentrations or Immediately Dangerous to Life or Health - Any supplied-air respirator with full facepiece and operated in a pressure-demand or other positive-pressure mode in combination with a separate escape supply. Any self-contained breathing apparatus with a full facepiece.
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: gas COLOR: colorless
ODOR: sweet odor TASTE: sweet taste MOLECULAR WEIGHT: 44.01 MOLECULAR FORMULA: N2-O BOILING POINT: -128 F (-89 C) FREEZING POINT: -132 F (-91 C) VAPOR PRESSURE: 760 mmHg @ -88 C VAPOR DENSITY (air=1): 1.530 SPECIFIC GRAVITY: Not applicable DENSITY: 1.8122 g/L @ 25 C WATER SOLUBILITY: 59% @ 25 C PH: Not applicable VOLATILITY: Not applicable ODOR THRESHOLD: Not available EVAPORATION RATE: Not applicable VISCOSITY: 0.0145 cP @ 25 C COEFFICIENT OF WATER/OIL DISTRIBUTION: Not applicable SOLVENT SOLUBILITY: Soluble: sulfuric acid, alcohol, alkali solutions, ether, oils
SECTION 10 STABILITY AND REACTIVITY
REACTIVITY: Stable at normal temperatures and pressure. CONDITIONS TO AVOID: Avoid contact with combustible materials. Protect from physical damage and heat. Containers may rupture or explode if exposed to heat. INCOMPATIBILITIES: combustible materials, metals, bases, reducing agents, peroxides, metal salts, metal oxides HAZARDOUS DECOMPOSITION: Thermal decomposition products: oxides of nitrogen POLYMERIZATION: Will not polymerize.
SECTION 11 TOXICOLOGICAL INFORMATION
NITROUS OXIDE: CARCINOGEN STATUS: IARC: Human Inadequate Evidence, Animal Inadequate Evidence, Group 3 (Anesthetics, volatile); ACGIH: A4 -Not Classifiable as a Human Carcinogen TARGET ORGANS: central nervous system MUTAGENIC DATA: Available. REPRODUCTIVE EFFECTS DATA: Available.
SECTION 12 ECOLOGICAL INFORMATION
Not available
SECTION 13 DISPOSAL CONSIDERATIONS
Dispose in accordance with all applicable regulations.
SECTION 14 TRANSPORT INFORMATION
U.S. DOT 49 CFR 172.101: PROPER SHIPPING NAME: Nitrous oxide ID NUMBER: UN1070 HAZARD CLASS OR DIVISION: 2.2 LABELING REQUIREMENTS: 2.2; 5.1 CANADIAN TRANSPORTATION OF DANGEROUS GOODS: SHIPPING NAME: NITROUS OXIDE UN NUMBER: UN1070 CLASS: 2.2; 5.1
SECTION 15 REGULATORY INFORMATION
U.S. REGULATIONS: CERCLA SECTIONS 102a/103 HAZARDOUS SUBSTANCES (40 CFR 302.4): Not regulated. SARA TITLE III SECTION 302 EXTREMELY HAZARDOUS SUBSTANCES (40 CFR 355.30): Not regulated. SARA TITLE III SECTION 304 EXTREMELY HAZARDOUS SUBSTANCES (40 CFR 355.40): Not regulated. SARA TITLE III SARA SECTIONS 311/312 HAZARDOUS CATEGORIES (40 CFR 370.21): ACUTE: Yes CHRONIC: No FIRE: No REACTIVE: No SUDDEN RELEASE: Yes SARA TITLE III SECTION 313 (40 CFR 372.65): Not regulated. OSHA PROCESS SAFETY (29CFR1910.119): Not regulated. STATE REGULATIONS: California Proposition 65: Not regulated. CANADIAN REGULATIONS: WHMIS CLASSIFICATION: A, C.
NATIONAL INVENTORY STATUS: U.S. INVENTORY (TSCA): Listed on inventory. TSCA 12(b) EXPORT NOTIFICATION: Not listed. CANADA INVENTORY (DSL/NDSL): Not determined.
MATHESON TRI-GAS, INC. MAKES NO EXPRESS OR IMPLIED WARRANTIES, GUARANTEES OR REPRESENTATIONS REGARDING THE PRODUCT OR THE INFORMATION HEREIN, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR USE. MATHESON TRI-GAS, INC. SHALL NOT BE LIABLE FOR ANY PERSONAL INJURY, PROPERTY OR OTHER DAMAGES OF ANY NATURE, WHETHER COMPENSATORY, CONSEQUENTIAL, EXEMPLARY, OR OTHERWISE, RESULTING FROM ANY PUBLICATION, USE OR RELIANCE UPON THE INFORMATION HEREIN.
AMMONIUM PERCHLORATE : KERR-MCGEE CHEMICAL CORP http://www.msdss.com/pdf/041316.htm
1 of 8 10/7/2005 9:27 PM
First Aid Measures Fire Fighting Measures Manufacturer/Responsible Party Personal Protection Physical-Chemical Properites Accidental Release Measures Handling/Storage Chemical Ingredients HAZCOM Label
Product Identification
Product ID: AMMONIUM PERCHLORATE MSDS Date: 06/01/1985 Tech Review: 01/10/1991 FSC: 6810 NIIN: 01-222-7559 LIIN: MSDS Number: 041316 Submitter: D DG Status Cd: C MFN: 01 Article: N Kit Part: N
Manufacturer-Responsible Party
Company Name: KERR-MCGEE CHEMICAL CORP Address: 123 ROBERT S KERR AVE Box: 25861 City: OKLAHOMA CITY State: OK ZIP: 73125 Country: US Info Phone Num: 405-270-1313 Emergency Phone Num: 405-270-1313 Resp. Party Other MSDS Num.: Preparer's Name: N/K Chemtrec Ind/Phone: Proprietary Ind: N Review Ind: Y Published: Y CAGE: 07083 Special Project Cd: N
Contractor Identification
Company Name: KERR-MCGEE CHEMICAL CORP Address: 123 ROBERT S KERR AVE Box: 25861 City: OKLAHOMA CITY State: OK ZIP: 73125 Country: US Phone: 405-270-1313 Contract Num: CAGE: 07083
Item Description Information
AMMONIUM PERCHLORATE : KERR-MCGEE CHEMICAL CORP http://www.msdss.com/pdf/041316.htm
2 of 8 10/7/2005 9:27 PM
Item Name: AMMONIUM PERCHLORATE,TECHNICAL Item Manager: S9G Specification Num: NK Type/Grade/Class: NK Unit of Issue: CO Quantitative Expression: 00000000250LB UI Container Qty: 250 POUNDS Type of Container: STD COMM PRAC
CHEMICAL INGREDIENTS
Ingred Name: AMMONIUM PERCHLORATE CAS: 7790-98-9 Cd: M RTECS #: SC7520000 Cd: M = Wt: Cd: = Vol: Cd: > Wt: Cd: >Vol: Cd: < Wt: Cd: <Vol: Cd: % Low Wt: Cd: % High Wt: Cd: % Low Vol: Cd: % High Vol: Cd: % Text: 99.5MIN Environmental Wt: Other REC Limits: 5MG/CUM,AS RESP DUST OSHA PEL: NOT ESTABLISHED Cd: M OSHA STEL: Cd: ACGIH TLV: NOT ESTABLISHED Cd: M ACGIH STEL: N/P Cd: EPA Rpt Qty: DOT Rpt Qty: Ozone Depleting Chemical: N
Hazards Identification
LD50 LC50 Mixture : 4200 MG/KG(RAT) & 1900MG/KG (RABBIT) Route of Entry Inds - Inhalation: YES Skin: YES Ingestion: YES Carcinogenicity Inds - NTP: NO IARC: NO OSHA: NO Health Hazards Acute and Chronic ACUTE:MILD IRRITANT TO THE SKIN,EYES,MUCOUS MEMBRANES,RESPIRATORY OR G.I. TRACT,REDNESS OF EYES AND SKIN. CHRONIC:SKIN,G.I. OR RESPIRATORY DISORDERS.
AMMONIUM PERCHLORATE : KERR-MCGEE CHEMICAL CORP http://www.msdss.com/pdf/041316.htm
3 of 8 10/7/2005 9:27 PM
Explanation of Carcinogenicity PER MSDS DATA. Signs and Symptions of Overexposure EYE:IRRT,REDNESS.SKIN:IRRT,REDNESS.INHL:URT IRRT.INGEST: GI TRACT IRRT,DIARR. Medical Cond Aggravated by Exposure PRE-EXISTING CONDITIONS MAY BE WORSEN.
First Aid Measures
First Aid INHAL:RMV TO FRESH AIR. IF NOT BRTHNG GIVE CPR; IF BRTHNG DIFF GIVE OXYGEN.EYE:IMMED FLUSH W/PLENTY OF WATER. SKIN:WASH W/SOAP&WATER. RMV CONTAM CLTHG&SHOES. INGEST:INDUCE VOMIT. RPT UNTIL VOMIT IS CLEAR. NOTHG BY MOUTH IIFUNCONSC. GET MED ICAL ATTN.
Accidental Release Measures
Spill Release Procedures SCOOP UP OR ABSORB WITH NONCOMBUSTIBLE ABSORBENT(VERMICULITE). Neutralizing Agent N/P
Disposal Considerations
Waste Disposal Methods EPA HAZWASTE D001. DISPOSE AS HAZWASTE IAW ALL LAWS & REGS.
Handling and Storage
Handling and Storage Precautions DO NOT ALLOW CONTACT W/COMBUSTIBLE MATERIALS.STORE IN ORIGINAL CLOSEDCONTAINERS.HANDLE CONTAINERS CAREFULLY.AVOID INHL DUST & EYE/SKN CONTACT. Other Precautions PROVIDE WATER FILLED JUMP TANK OR SAFETY SHOWER.WASHCONTAM CLOTHINGPROMPTLY
Fire Fighting Measures
Flash Point Method: N/P Flash Point: Flash Point Text: N/R Autoignition Temp: Autoignition Temp Text: N/A Lower Limits: N/R Upper Limits: N/R Extinguishing Media WATER SPRAY, FOAM. Fire Fighting Procedures
AMMONIUM PERCHLORATE : KERR-MCGEE CHEMICAL CORP http://www.msdss.com/pdf/041316.htm
4 of 8 10/7/2005 9:27 PM
USE NIOSH/MSHA APPROVED SCBA IN AN ENCLOSED AREA. Unusual Fire/Explosion Hazard COOL W/WATER FOR LARGE FIRE IN STORAGE AREA,USE UNMANNED HOSE HOLDER ORWITHDRAW & LET BURN! SEE SUP
Personal Protection
Respiratory Protection USE NIOSH/MSHA APPROVED RESPIRATOR FOR DUST IF ABOVE PEL/TLV. Ventilation LOCAL OR GENERAL AS REQD. Protective Gloves IMPERVIOUS Eye Protection SAFETY GLASSES OR GOGGLES Other Protective Equipment WEAR PROTECTIVE CLOTHING, RUBBER BOOTS. DO NOT WEAR LEATHER. Work Hygienic Practices AVOID CONTACT WITH EYES AND SKIN;DO NOT BREATHE DUST/MIST;KEEP FROM CONTACTWITH CLOTHING & OTHER COMBUSTIBLE MATERIAL. Supplemental Safety and Health .
Stability Indicator/Materials to Avoid: NO COMBUSTIBLES,OXIDIZERS CREATE EXTREMEFIRE/EXPL HAZARD.
AMMONIUM PERCHLORATE : KERR-MCGEE CHEMICAL CORP http://www.msdss.com/pdf/041316.htm
5 of 8 10/7/2005 9:27 PM
Stability Condition to Avoid: STABLE BELOW 150 F.DECOMP OR EXPLODES AT HIGHER TEMP. Hazardous Decomposition Products: VAPORS OF CHLORINE,HYDROGENCHLORIDES,AMMONIA,OXIDES OF NITROGEN. Hazardous Polymerization Indicator: NO Conditions to Avoid Polymerization: N/P
Toxicological Information
Toxicological Information: N/P
Ecological Information
Ecological: N/P
MSDS Transport Information
Transport Information: N/P
Regulatory Information
SARA Title III Information: N/P Federal Regulatory Information: N/P State Regulatory Information: N/P
Other Information
Other Information: N/P
HMIS Transportation Information
Responsible Party CAGE: 07083 Trans ID Num: 116265 Product ID: AMMONIUM PERCHLORATE MSDS Prepared Date: 06/01/1985 Review Date: 03/16/1987 MFN: 1 Submitter: D DG Status Cd: C Article w/o MSDS : N Tech Entry NOS Shipping Nm: Radioactivity: Form: Net Explosive Weight: Coast Guard Ammo Cd: Magnetism: N/P
AMMONIUM PERCHLORATE : KERR-MCGEE CHEMICAL CORP http://www.msdss.com/pdf/041316.htm
6 of 8 10/7/2005 9:27 PM
Net Unit Weight: AF MMAC Cd: DOD Exemption Num: Limited Qty Ind: Multiple Kit Num: 0 Kit Ind: N Kit Part Ind: N Review Ind: Y Unit of Issue: CO Container Qty: 250 POUNDS Type of Container: STD COMM PRAC Additional Data:
Detail DOT Information
DOT PSN Cd: ASD Symbols: DOT Proper Shipping Name: AMMONIUM PERCHLORATE DOT PSN Modifier: Hazard Class: 5.1 UN ID Num: UN1442 DOT Packaging Group: II Label: OXIDIZER Special Provision: 107,A9 Packaging Exception: Non Bulk Pack: 212 Bulk Pack: 242 Max Qty Pass: 5 KG Max Qty Cargo: 25 KG Vessel Stow Req: E Water/Ship/Other Req: 58,69,106
Detail IMO Information
IMO PSN Cd: AZZ IMO Proper Shipping Name: AMMONIUM PERCHLORATE IMO PSN Modifier: IMDG Page Num: 5126 UN Num: 1442 UN Hazard Class: 5.1 IMO Packaging Group: II Subsidiary Risk Label: - EMS Num: 5.1-09 Med First Aid Guide Num: 745
Detail IATA Information
IATA PSN Cd: BQC
AMMONIUM PERCHLORATE : KERR-MCGEE CHEMICAL CORP http://www.msdss.com/pdf/041316.htm
7 of 8 10/7/2005 9:27 PM
IATA UN ID Num: 1442 IATA Proper Shipping Name: AMMONIUM PERCHLORATE IATA PSN Modifier: IATA UN Class: 5.1 Subsidiary Risk Class: IATA Label: OXIDIZER UN Packing Group: II Packing Note Passenger: 509 Max Qty Pass: 5KG Packaging Note Cargo: 512 Max Qty Cargo: 25KG Exceptions: A22
Detail AFI Information
AFI PSN Cd: BQC AFI Symbols: AFI Proper Shipping Name: AMMONIUM PERCHLORATE AFI PSN Modifier: AFI Hazard Class: 5.1 AFI UN ID Num: UN1442 AFI Packing Group: II AFI Label: Special Provisions: P5, 107, A9 Back Pack Reference: A9.8
HAZCOM Label
Product ID: AMMONIUM PERCHLORATE CAGE: 07083 Assigned Ind: N Company Name: KERR-MCGEE CHEMICAL CORP Street: 123 ROBERT S KERR AVE PO Box: 25861 City: OKLAHOMA CITY State: OK ZIP: 73125 Country: US Health Emergency Phone: 405-270-1313 Label Required Ind: Y Date of Label Review: 01/10/1991 Status Cd: C Mfg Label Num: UNKNOWN Label Date: 01/10/1991 Year Procured: 1990 Origination Cd: G Chronic Hazard Ind: Y Eye Protection Ind: YES Skin Protection Ind: YES Signal Word: DANGER Respiratory Protection Ind: YES Health Hazard: Slight
AMMONIUM PERCHLORATE : KERR-MCGEE CHEMICAL CORP http://www.msdss.com/pdf/041316.htm
8 of 8 10/7/2005 9:27 PM
Contact Hazard: Slight Fire Hazard: None Reactivity Hazard: Severe Hazard And Precautions ACUTE-MINOR IRRITANT TO EYE,SKIN,RESPIRATORY & GI TRACT.CHRONIC-SKIN,GI OR RESPIRATORY DISORDERS.STORAGE-DANGER!STRONG OXIDIZER-CONTACT WITH COMBUSTIBLE OR OXIDIZABLE MATERIAL CONSTITUTES AN EXTREME FIRE & EXPLOSION HAZARD..CONTAMINATED CLOT HING & ORGANICMETERIALSARE DANGEROUSLY FLAMMABLE.ALWAYS HAVE A WATER FILLED JUMP TANK OR DELUGESHOWER NEARBY.IF YOUR CLOTHING CATCHES FIRE,DON'T USE A FIRE BLANKET.USE THE JUMP TANK OR DELUGE SHOWER.DON'T WEAR LEATHER MATERIALS.STTORE CON TAINERSTIGHTLY CLOSED.FIRST ID-CALL A DOCTOR.EYE:FLUSH W/WATER FOR 15 MIN.SKIN:WASH WITH SOAP & WATER.INHALED:REMOVE TO FRESH AIR.INGESTION:INDUCE VOMITING.GIVEWATER.
MATERIAL SAFETY DATA SHEET &
EMERGENCY RESPONSE INFORMATION
Revised: 4/27/04
Manufacturer: AeroTech Division RCS Rocket Motor Components, Inc.
SECTION II - HAZARDOUS INGREDIENTS------------------------------------------------------------------------------------------------------------
Reload kits contain propellant and delay charge modules which consist primarilyof ammonium perchlorate (NH4ClO4) dispersed in synthetic rubber.
SECTION III - PHYSICAL DATA------------------------------------------------------------------------------------------------------------
Boiling Point Range: Decomposes
Specific Gravity: Propellant ranges from .058 to .076 lb/cubic inch
Appearance: Plastic bags containing various colored parts
Odor: None
Physical State: Solid
SECTION IV - FIRE AND EXPLOSION HAZARD DATA------------------------------------------------------------------------------------------------------------
Autoignition Temp.: 550 Deg. F
Flammability Class: Flammable
Extinguishing Media: Water only
Special Fire Proc.: Fire action: Water. Protect against toxic fumes.
Unusual Fire Hazard: Burning propellant gives off hydrogen chloride gas.
Unusual ExplosionHazard: None Anticipated
SECTION V - HEALTH HAZARD DATA------------------------------------------------------------------------------------------------------------
Effects of Overexposure
Acute: None Known.
Chronic: None Known.
Overexposure -
Eyes: Ammonium perchlorate is a mild irritant to the skin,eyes, mucous membranes and the digestive tract.
Skin: Ammonium perchlorate is a mild irritant to the skin,eyes, mucous membranes and the digestive tract.
Inhalation: No information available.
Ingestion: Ammonium perchlorate is a mild irritant to the skin,eyes, mucous membranes and the digestive tract.
SECTION VI - EMERGENCY FIRST AID PROCEDURES------------------------------------------------------------------------------------------------------------
Ingestion: If swallowed, induce vomiting. Call a physician.
Inhalation: Avoid breathing exhaust fumes.
Skin Contact: For mild exhaust burns use a first aid burn ointment.For severe burns see a physician immediately.If loose ammonium perchlorate contacts skin, flushwith plenty of water.
SECTION VI - EMERGENCY FIRST AID PROCEDURES (Cont'd)------------------------------------------------------------------------------------------------------------
Eye Contact: Immediately flush eyes with plenty of water for at least15 minutes. Call a physician.
Note to Physician: Chemical of exposure is ammonium perchlorate, amild gastric irritant.
SECTION VII - REACTIVITY DATA------------------------------------------------------------------------------------------------------------
Conditions to Avoid: Heat (propellant autoignites at 550 Deg. F).
Incompatibility: Acids
Haz. Decomp. Products: Oxides of carbon, hydrogen chloride gas
SECTION VIII - SPILL OR LEAK PROCEDURES------------------------------------------------------------------------------------------------------------
Spills: Replace reload kits in boxes and seal securely.
Waste Disposal Method: Load reload kit into motor hardware. Pack motor firmly in hole in ground with nozzle pointing up. Ignite motor electrically and wait 5 minutes before approaching. Dispose of spent reload components in inert trash.
SECTION IX - SPECIAL PROTECTION INFORMATION------------------------------------------------------------------------------------------------------------
VentilationRequirements: None. Do not use reload kits indoors.
Specific Personal Protective Equipment
Respiratory: None. Avoid breathing exhaust fumes.
Other Handling and Storage Requirements:
Store reload kits away from sources of heat andhighly flammable materials.
MATERIAL SAFETY DATA SHEET &
EMERGENCY RESPONSE INFORMATION
Revised: 4/27/04
Manufacturer: AeroTech Division of RCS Rocket Motor Components, Inc.
SECTION II - HAZARDOUS INGREDIENTS------------------------------------------------------------------------------------------------------------
Copperhead and FirstFire igniters consist of a copper/Mylar/copper-based flex circuitmaterial of various shapes and sizes or a two-conductor lead wire coated with up to 50milligrams of flammable material which consists primarily of carbon black, carbon fibers,ammonium or potassium perchlorate (NH4ClO4 or KCLO4) and aluminum dispersed in anitrocellulose-based binder.
SECTION III - PHYSICAL DATA------------------------------------------------------------------------------------------------------------
Boiling Point Range: Decomposes
Specific Gravity: Coating averages .06 lb./cubic inch
Appearance: Copper-like strips or wires with black coating on one end
Odor: Slight to none
Physical State: Solid
SECTION IV - FIRE AND EXPLOSION HAZARD DATA------------------------------------------------------------------------------------------------------------
Autoignition Temp.: Approx. 550 Deg. F
Flammability Class: Flammable
Extinguishing Media: Water only
Special Fire Proc.: Fire action: Water. Protect against toxic fumes.
Unusual Fire Hazard: Burning igniters may give off hydrogen chloride gas.
Unusual ExplosionHazard: None Anticipated
SECTION V - HEALTH HAZARD DATA------------------------------------------------------------------------------------------------------------
Effects of Overexposure
Acute: None Known.
Chronic: None Known.
Overexposure -
Eyes: Ammonium and potassium perchlorate is a mild irritant to the skin, eyes, mucous membranes and the digestive tract.
Skin: Ammonium and potassium perchlorate is a mild irritant to the skin, eyes, mucous membranes and the digestive tract.
Inhalation: No information available.
Ingestion: Ammonium and potassium perchlorate is a mild irritant to the skin, eyes, mucous membranes and the digestive tract.
SECTION VI - EMERGENCY FIRST AID PROCEDURES------------------------------------------------------------------------------------------------------------
Ingestion: If swallowed, induce vomiting. Call a physician.
Inhalation: Avoid breathing fumes.
Skin Contact: For mild exhaust burns use a first aid burn ointment.For severe burns see a physician immediately.
Eye Contact: Immediately flush eyes with plenty of water for at least15 minutes. Call a physician.
Note to Physician: Chemical of exposure is ammonium or potassium perchlorate, a mild gastric irritant.
SECTION VII - REACTIVITY DATA------------------------------------------------------------------------------------------------------------
Conditions to Avoid: Heat (coating autoignites at approx. 550 Deg. F).
Incompatibility: Acids
Haz. Decomp. Products: Oxides of carbon, hydrogen chloride gas
SECTION VIII - SPILL OR LEAK PROCEDURES------------------------------------------------------------------------------------------------------------
Spills: Replace igniters in boxes and seal securely.
Waste Disposal Method: Return live igniters to manufacturer. Dispose of spent igniters in inert trash.
SECTION IX - SPECIAL PROTECTION INFORMATION------------------------------------------------------------------------------------------------------------
VentilationRequirements: None. Do not use igniters indoors.
Specific Personal Protective Equipment
Respiratory: None. Avoid breathing exhaust fumes.
Other Handling and Storage Requirements:
Store igniters away from sources of heat andhighly flammable materials.
MANUFACTURERITW Devcon30 Endicott St.Danvers, MA 01923
Emergency telephone number (800) 424-9300(CHEMTREC):
Other Calls: (978) 777-1100
EMERGENCY INFORMATION
2-TON CLEAR EPOXY RESIN
Printed: 12/6/2001
2. COMPOSITION/INFORMATION ON INGREDIENTS
"TLV" means the Threshold Limit Value exposure (eight-hour, time-weighted average, unless otherwise noted) established by the American Conference of Governmental Industrial Hygienists. "STEL" indicates a short-term exposure limit. "PEL" indicates the OSHA Permissible Exposure Limit."n/e" indicates that no exposure limit has been established. An asterisk (*) indicates a substance whose identity is a trade secret of our supplier and unknown to us.
Last revised: 11/21/01
HAZARDOUS CONSTITUENTS
Emergency Overview
WARNING! Eye and skin irritant. Potential skin sensitizer.
3. HAZARDS IDENTIFICATION
Appearance, form, odor: viscous liquid with little odor.
14260 14310 14310G 14355 14360 DA041 DA042This product appears in the following stock number(s):
Constituent ACGIH TLV
CAS No. Weight percent
OSHAPEL
Other Limits
Abbr.
Bisphenol A diglycidyl ether resin 25068386 >60 n/en/eDGEBPA n/e
Eyes: Moderate irritant (stinging, burning sensation, tearing, redness, swelling). Contact at elevated temperatures cancause thermal burns which may result in permanent damage or blindness.
Potential health effects
Skin: Moderate irritant. Contact at elevated temperatures can cause thermal burns which may result in permanentdamage. May cause skin sensitization (itching, redness, rashes, hives, burning, swelling).
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATIONTradename: 2-TON CLEAR EPOXY RESIN
General use: This information applies to the resin component of the two-part kit; handle freshly-mixed resin andhardener as recommended for the hardener. After curing, the product is not hazardous.
Chemical family: Epoxy resin
Product Identifier: EPOXY RESIN
MSDS0619
ITW Devcon Material Safety Data Sheet Page 1Part No.: 1233
Unusual fire and explosion hazards: Heating above 300 deg F in the presence of air may cause slow oxidative decomposition and above 500 deg F maycause polymerization. Personnel in vicinity and downwind should be evacuated.
Hazardous products of combustion:When heated to decomposition it emits fumes of Cl- , carbon monoxide, other fumes and vapors varying incomposition and toxicity.
Carbon dioxide Dry chemical Foam Alcohol foamWater
Extinguishing media:
Flash Point (°F): >400 Method: PMCC
Explosive limits in air (percent) -- Lower: n/d Upper: n/d
Special firefighting procedures: Material will not burn unless preheated. Do not enter confined space without full bunker gear. Firefighters shouldwear self-contained breathing apparatus and protective clothing. Cool fire exposed containers with water.
5. FIRE FIGHTING MEASURES
First aid for skin: Immediately remove contaminated clothing and excess contaminant. Flush skin with water for at least 15 minutes.Wash thoroughly with soap and warm water. Consult a physician if irritation develops.
First aid for ingestion: Do NOT induce vomiting. Rinse mouth out with water, then sip water to remove taste from mouth. Never giveanything by mouth to an unconscious person. If vomiting occurs spontaneously, keep head below hips (if sitting) or tothe side (if lying down) to prevent aspiration. Get medical attention.
First aid for inhalation: Remove patient to fresh air. Administer oxygen if breathing is difficult. Get medical attention if symptoms persist.
4. FIRST AID MEASURESFirst aid for eyes:
Flush eye with clean water for at least 20 minutes while gently holding eyelids open, lifting upper and lower lids. Getimmediate medical attention.
Medical conditions which may be aggravated by exposure: Preexisting eye and skin disorders. Development of preexisting skin or lung allergy symptoms may increase.
Effects of chronic overexposure: Prolonged or repeated skin contact may cause sensitization, with itching, swelling, or rashes on later exposure.
Other effects:See section 11.
OSHA regulated: No ACGIH: No National Toxicology Program: No
Inhalation:The low vapor pressure of the resin makes inhalation unlikely in normal use. In applications where vapors (caused byhigh temperature) or mists (caused by mixing) are created, breathing may cause a mild burning sensation in the nose,throat and lungs.
Ingestion:Acute oral toxicity is low. May cause gastric distress (nausea, vomiting, diarrhea).
MSDS0619
ITW Devcon Material Safety Data Sheet Page 2Part No.: 1233
Containment: Dike, contain and absorb with clay, sand or other suitable material.
Cleanup: For large spills, pump to storage/salvage vessels. Soak up residue with an absorbent such as clay, sand, or othersuitable material and dispose of properly. Flush area with water to remove trace residue.
Special procedures: Prevent spill from entering drainage/sewer systems, waterways, and surface waters.
Storage: Store in a cool, dry area away from high temperatures and flames. Keep containers closed when not in use.
Other engineering controls : Have emergency shower and eye wash available.
Skin protection: Chemical-resistant gloves (i.e. butyl) and other gear as required to prevent skin contact.
Respiratory protection: None needed in normal use with proper ventilation. In poorly ventilated areas use NIOSH approved organic vaporcartidges for uncured resin and dust/particle respirators during grinding/sanding operations of cured resin as exposurelevels dictate (see OSHA 1910.134).
Personal protective equipment
Eye and face protection: Chemical goggles if liquid contact is likely, or Safety glasses with side shields.
Ventilation : Use ventilation that is adequate to keep employee exposure to airborne concentrations below exposure limits (or tothe lowest feasible levels when limits have not been established). Although good general mechanical ventilation isusually adequate for most industrial applications, local exhaust ventilation is preferred (see ACGIH - IndustrialVentilation). Local exhaust may be required for confined areas (see OSHA 1910.146).
7. HANDLING AND STORAGEHandling precautions:
Avoid contact with skin, eyes, or clothing. Wash thoroughly with soap and water after using and particularly beforeeating, drinking, smoking, applying cosmetics, or using toilet facilities.Launder contaminated clothing and protective gear before reuse. Discard contaminated leather articles.Handle mixed resin and hardener in accordance with the potential hazard of the curing agent used. Provideappropriate ventilation/respiratory protection against decomposition products (see Section 10) during welding/flamecutting operations and to protect against nuisance dust during sanding/grinding of cured product.
Spill control: Avoid personal contact. Eliminate ignition sources. Ventilate area.
6. ACCIDENTAL RELEASE MEASURES
MSDS0619
ITW Devcon Material Safety Data Sheet Page 3Part No.: 1233
Acute dermal effects:
DGEBPA: Draize -1.6 (rabbit)
LD50 (rabbit): >20 ml/kg (DGEBPA Resin)
Acute inhalation effects: LC50 (rat): No deaths in saturated air (DGEBPA) Exposure: hours. 8
9. PHYSICAL AND CHEMICAL PROPERTIES
Melting point (°F): n/d
Boiling point (°F): >500
Vapor density (air = 1): >1
Evaporation rate (butyl acetate = 1): <<1
Specific gravity: 1.17
Solubility in water: Negligible
pH (5% solution or slurry in water): neutralPercent volatile by volume: 0
VOC (grams/liter): 0
Percent solids by weight: 100
Vapor pressure (mmHg): 0.03 mm Hg at 171 °F
Hazardous products of decomposition:Oxides of carbon; aldehydes, acids and other organic substances may be formed during combustion or elevatedtemperature (>500 deg F) degradation.
Conditions under which hazardous polymerization may occur: Heat is generated when resin is mixed with curing agents; Run-a-way cure reactions may char and decompose theresin, generating unidentified fumes and vapors which may be toxic.
Incompatible materials: Strong Lewis or mineral acids, strong oxidizing agents, strong mineral and organic bases (especially primary andsecondary aliphatic amines).
Eye irritation:DGEBPA: Draize -2 (rabbit)
Subchronic effects: No data available.
Carcinogenicity, teratogenicity, and mutagenicity: 1) MUTAGENICITY: Liquid resins based on diglycidyl ether of Bisphenol A (DGEBPA), have proved to be inactivewhen tested by in vivo mutagenicity assays. These resins have shown activity in in vitro microbial mutagenicityscreening and have produced chromosomal aberrations in cultured rat liver cells. The significance of these tests to
10. STABILITY AND REACTIVITYThis material is chemically stable.
Conditions to avoid : Open flame and extreme heat
Hazardous polymerization will not occur.
MSDS0619
ITW Devcon Material Safety Data Sheet Page 4Part No.: 1233
Other chronic effects: Prolonged or repeated skin contact may cause sensitization, with itching, swelling, or rashes on later exposure.Studies have shown bisphenol A diglycidyl ether resin to cause allergic contact dermititis.
man is unknown. 2) CARCINOGENICITY: Recent 2-year bioassays in rats and mice exposed by the dermal route toDGEBPA yielded no evidence of carcinogenicy to the skin or any other organs. This study clarifies prior equivocalresults from a 2-year mouse skin painting study, which were suggestive, but not conclusive, for weak carcinogenicactivity. 3) The International Agency for Research on Cancer (IARC) concluded that DGEBPA is not classifiable as acarcinogen (IARC group 3), that is human and animal evidence of carcinogenicy is inadequate.
Mobility and persistence: No data available.
Environmental fate: No data available.
14. TRANSPORT INFORMATION
Proper shipping name: Non-regulated
Technical name : N/A
Hazard class : N/A
UN number: N/A
Packing group: N/A
Emergency Response Guide no.: N/A
IMDG page number: N/A
Other: N/A
LtdQty :
ORM-D : N/A
13. DISPOSAL CONSIDERATIONS
Waste management recommendations: If this resin becomes a waste, it would not be a hazardous waste by RCRA criteria (40CFR 261). Dispose ofaccording to applicable federal, state, and local regulations. Incineration is the preferred method of disposal.
Please see also Section 15, Regulatory Information.
12 ECOLOGICAL INFORMATION
Ecotoxicity: No data available.
Constituent Oral LD50(rat)
Dermal LD50(rabbit)
Inhalation LC504hr, (rat)
Bisphenol A diglycidyl ether resin 11.4 g/kg >20 ml/kg no deaths
Toxicological information on hazardous chemical constituents of this product:
'n/d' = 'not determined'
MSDS0619
ITW Devcon Material Safety Data Sheet Page 5Part No.: 1233
For purposes of SARA Section 312 hazardous materials inventory reporting, the following hazardclasses apply to this material: - Immediate health hazard -- Delayed health hazard -
The information and recommendations in this document are based on the best information available to us at the time of preparation, but we make no other warranty, express or implied, as to its correctness or completeness, or as to the results of reliance on this document.
Hazardous Materials Identification System (HMIS) ratings:
Health2*
Flammability 1
Reactivity 1
16. OTHER INFORMATION
For purposes of the California Safe Drinking Water and Toxic Enforcement Act of 1986 (Prop. 65), this product containsa chemical or chemicals known to the State of California to cause cancer.
California regulations:
Constituent Extremely Hazardous*
ToxicChemical**
CERCLA RQ (lbs)
TSCA 12B ExportNotification
Bisphenol A diglycidyl ether resin No No 0.0 Not required
Regulatory status of hazardous chemical constituents of this product:
*Consult the appropriate regulations for emergency planning and release reporting requirements for substances on the SARA Section 301 Extremely Hazardous Substance list. **Substances for which the "Toxic Chemical" column is marked "Yes" are on the SARA Section 313 list ofToxic Chemicals, for which release reporting may be required. For specific requirements, consult the appropriate regulations.
15. REGULATORY INFORMATION
U.S. Federal Regulations
The following RCRA code(s) applies to this material if it becomes waste:None
All ingredients of this product are listed, or are exempt from listing, on the TSCA inventory.TSCA:
WHMIS hazard class(es) : D2B
Canadian regulations
All components of this product are on the Domestic Substances List.
MSDS0619
ITW Devcon Material Safety Data Sheet Page 6Part No.: 1233
MANUFACTURERITW Devcon30 Endicott St.Danvers, MA 01923
Emergency telephone number (800) 424-9300(CHEMTREC):
Other Calls: (978) 777-1100
EMERGENCY INFORMATION
2-TON CLEAR EPOXY HARDENER
Printed: 12/6/2001
2. COMPOSITION/INFORMATION ON INGREDIENTS
"TLV" means the Threshold Limit Value exposure (eight-hour, time-weighted average, unless otherwise noted) established by the American Conference of Governmental Industrial Hygienists. "STEL" indicates a short-term exposure limit. "PEL" indicates the OSHA Permissible Exposure Limit."n/e" indicates that no exposure limit has been established. An asterisk (*) indicates a substance whose identity is a trade secret of our supplier and unknown to us.
Last revised: 07/07/1999
HAZARDOUS CONSTITUENTS
Emergency Overview
DANGER! Corrosive. Eye, skin and respiratory irritant. Potential skin sensitizer.
3. HAZARDS IDENTIFICATION
Appearance, form, odor: Amber liquid with ammonia-like, fishy odor.
14260 14310 14310G 14355 14360 DA041 DA042This product appears in the following stock number(s):
Constituent ACGIH TLV
CAS No. Weight percent
OSHAPEL
Other Limits
Abbr.
Aminoethylpiperazine 140318 15-25 n/en/eAEP n/e
Nonylphenol 25154523 75-85 n/en/e n/e
Eyes: Severe irritation or burns. May cause lacrimation, conjunctivitis, corneal damage and may cause permanent injury.Inhalation:
If the hardener is strongly heated or atomized, the vapor or mist can cause severe irritation of the respiratory tract.Coughing and chest pain may result.
Potential health effects
Skin: Severe irritation or burns, necrosis and permanent injury.
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATIONTradename: 2-TON CLEAR EPOXY HARDENERGeneral use: The following health hazard data pertain to the hardener only. When fully cured, the mixed product is
non-hazardous.Chemical family: Polyamine adduct
MSDS0619
ITW Devcon Material Safety Data Sheet Page 1Part No.: 1500
Unusual fire and explosion hazards: A sudden reaction and fire may result when mixed with an oxidizing agent.
Hazardous products of combustion:Toxic and irritating smoke.
Carbon dioxide Dry chemical Foam Alcohol foamWater
Extinguishing media:
Flash Point (°F): 275 Method: PMCC
Explosive limits in air (percent) -- Lower: n/d Upper: n/d
Special firefighting procedures: Firefighters should wear self-contained breathing apparatus and protective clothing (butyl rubber). Water spray maybe useful in cooling containers and dispersing vapors.
5. FIRE FIGHTING MEASURESGeneral fire and explosion characteristics:
Combustible liquid, class IIIB
First aid for skin: Remove contaminated clothing and shoes. Wipe off hardener and wash thoroughly with mild soap and water; see adoctor if redness or swelling occurs
First aid for ingestion: Do NOT induce vomiting. If patient is conscious, dilute by giving milk or water. Get immediate medical attention.
First aid for inhalation: Remove patient to fresh air. Administer oxygen if breathing is difficult. Get medical attention if symptoms persist.
Note to physician : Highly injurious to all tissues, similar to that of ammonia or ammonia gas. Chemical pneumonitis, pulmonary edema,laryngeal edema and delayed scarring of the airway or other attected tissues may occur following exposure. Givesupportive treatment similar to thermal burns.
4. FIRST AID MEASURESFirst aid for eyes:
Flush with clear water holding eyelids open for at least 15 minutes. Get immediate medical attention.
Medical conditions which may be aggravated by exposure: Asthma, eczema, or skin disorders and allergies, eye disease.
Effects of chronic overexposure: Prolonged or repeated overexposure by skin contact or inhalation may cause skin sensitization, with itching, swellingand rashes upon further exposure. Adverse eye effects may include conjunctivitis or corneal damage. Nonyphenolhas caused allergic sensitization in humans.
Other effects:None known.
OSHA regulated: No ACGIH: No National Toxicology Program: No
International Agency for Research on Cancer: No
Cancer-suspect constituent(s) : None
Carcinogenicity --
Ingestion:Causes severe damage to mucous membranes if swallowed. May cause malaise, headache, discomfort bleeding andvomiting of blood.
MSDS0619
ITW Devcon Material Safety Data Sheet Page 2Part No.: 1500
Containment: Construct a dike to prevent spreading. Collect run-off water for proper disposal.
Cleanup: Using butyl rubber protective clothing and self-contained breathing apparatus, neutralize and reduce vapors withsodium bisulfate. Absorb spillage on inert material and discard in closed, nonporous containers.
Special procedures: Prevent product from entering streams or drinking water supplies (notify local health authorities and other appropriateagencies if such contamination occurs).
Storage: ---Store closed in a cool, dry place away from oxidizers, heat or flame.
Other engineering controls : Have emergency showers and eye wash stations in area.
Skin protection: Chemical resistant rubber gloves (nitrile) and other protective clothing as required to prevent skin contact.
Respiratory protection: None needed in normal use with proper ventilation. In poorly ventilated areas, use NIOSH-approved organic vapormasks.
Personal protective equipment
Eye and face protection: Safety glasses with side shields or splash proof goggles.
Ventilation : Local exhaust is recommended for repeated or prolonged use, especially in confined areas. General mechanicalventilation is usually sufficient for occassional use.
7. HANDLING AND STORAGEHandling precautions:
---Avoid skin and eye contact with this hardener.---Keep hands away from eyes when handling material or before washing after use. ---Wash thoroughly after using, particularly before eating or smoking. ---Launder contaminated clothing before re-use; discard contaminated leather articles. ---Prolonged or repeated overexposure can cause sensitization and allergic response. Those so affected shouldconsult a physician, and avoid further exposure to this material if exposure is confirmed.---Do not use sodium nitrite or other nitrosating agents (nitrous acid, nitrites or nitrous oxide atmospheres) withproduct, cancer-causing nitrosamines could be formed.
Technical name : N-Aminoethylpiperazine and Nonylphenol
Hazard class : 8
UN number: 3267
Packing group: III
Emergency Response Guide no.: 153
IMDG page number: N/A
Other: Marine Pollutant (nonylphenol)
LtdQty :
ORM-D :
13. DISPOSAL CONSIDERATIONS
Waste management recommendations: Remove to a waste disposal facility operating in compliance with state and local regulations. Incineration is theprefferred method of disposal.
Please see also Section 15, Regulatory Information.
12 ECOLOGICAL INFORMATION
Ecotoxicity: Not available.
Constituent Oral LD50(rat)
Dermal LD50(rabbit)
Inhalation LC504hr, (rat)
Aminoethylpiperazine 2140 mg/kg 880 mg/kg n/d
Nonylphenol 1620 mg/kg 2140 mg/kg >1 mg/L
Toxicological information on hazardous chemical constituents of this product:
'n/d' = 'not determined'
MSDS0619
ITW Devcon Material Safety Data Sheet Page 5Part No.: 1500
For purposes of SARA Section 312 hazardous materials inventory reporting, the following hazardclasses apply to this material: - Immediate health hazard -- Delayed health hazard -
The information and recommendations in this document are based on the best information available to us at the time of preparation, but we make no other warranty, express or implied, as to its correctness or completeness, or as to the results of reliance on this document.
Hazardous Materials Identification System (HMIS) ratings:
Health3*
Flammability 1
Reactivity 0
16. OTHER INFORMATION
Constituent Extremely Hazardous*
ToxicChemical**
CERCLA RQ (lbs)
TSCA 12B ExportNotification
Aminoethylpiperazine No No 0.0 Not required
Nonylphenol No No 0.0 Not required
Regulatory status of hazardous chemical constituents of this product:
*Consult the appropriate regulations for emergency planning and release reporting requirements for substances on the SARA Section 301 Extremely Hazardous Substance list. **Substances for which the "Toxic Chemical" column is marked "Yes" are on the SARA Section 313 list ofToxic Chemicals, for which release reporting may be required. For specific requirements, consult the appropriate regulations.
15. REGULATORY INFORMATION
U.S. Federal Regulations
The following RCRA code(s) applies to this material if it becomes waste:None
All ingredients of this product are listed, or are exempt from listing, on the TSCA inventory.TSCA:
WHMIS hazard class(es) : E;D2B
Canadian regulations
All components of this product are on the Domestic Substances List.
MSDS0619
ITW Devcon Material Safety Data Sheet Page 6Part No.: 1500
ACCELERATOR : TRANSWORLD ADHESIVE & CHEMICAL CO... http://www.msdss.com/pdf/002770.htm
1 of 6 10/7/2005 9:13 PM
First Aid Measures Fire Fighting Measures Manufacturer/Responsible Party Personal Protection Physical-Chemical Properites Accidental Release Measures Handling/Storage Chemical Ingredients HAZCOM Label
Product Identification
Product ID: ACCELERATOR MSDS Date: 01/01/1985 Tech Review: 07/29/1985 FSC: 8040 NIIN: LIIN: 00F001757 MSDS Number: 002770 Submitter: F BT Status Cd: C MFN: 01 Article: N Kit Part: N
Manufacturer-Responsible Party
Company Name: TRANSWORLD ADHESIVE & CHEMICAL CORPORATION Address: Box: City: N/P State: NK ZIP: 00000 Country: NK Info Phone Num: Emergency Phone Num: (617) 878-7015 Resp. Party Other MSDS Num.: Preparer's Name: N/P Chemtrec Ind/Phone: Proprietary Ind: Y Review Ind: Y Published: Y CAGE: 59888 Special Project Cd: N
Contractor Identification
Company Name: TRANSWORLD ADHESIVE AND CHEMICAL CORP Address: AIR STATION INDUSTRIAL PK Box: City: ROCKLAND State: MA ZIP: 02370-1137 Country: US Phone: UNKNOWN Contract Num: CAGE: 59888
CHEMICAL INGREDIENTS
ACCELERATOR : TRANSWORLD ADHESIVE & CHEMICAL CO... http://www.msdss.com/pdf/002770.htm
ACCELERATOR : TRANSWORLD ADHESIVE & CHEMICAL CO... http://www.msdss.com/pdf/002770.htm
3 of 6 10/7/2005 9:13 PM
LD50 LC50 Mixture : N/P Route of Entry Inds - Inhalation: N/P Skin: N/P Ingestion: N/P Carcinogenicity Inds - NTP: N/P IARC: N/P OSHA: N/P Health Hazards Acute and Chronic N/P Explanation of Carcinogenicity N/P Signs and Symptions of Overexposure SKIN AND EYE IRRITATION. HIGH EXPOSURE CAUSES NARCOSIS. Medical Cond Aggravated by Exposure N/P
First Aid Measures
First Aid WASH SKIN WITH SOAP & WATER. FLUSH EYES WITH WATER. PROVIDE OXYGEN OR FRESHAIR. CONSULT PHYSICIAN.
Accidental Release Measures
Spill Release Procedures FLUSH WITH WATER OR SOAK UP WITH INDUSTRIAL ABSORBANTS. Neutralizing Agent N/P
Disposal Considerations
Waste Disposal Methods DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.
Handling and Storage
Handling and Storage Precautions STORE IN COOL DRY AREA. Other Precautions N/P
Fire Fighting Measures
ACCELERATOR : TRANSWORLD ADHESIVE & CHEMICAL CO... http://www.msdss.com/pdf/002770.htm
4 of 6 10/7/2005 9:13 PM
Flash Point Method: N/P Flash Point: Flash Point Text: 50F Autoignition Temp: Autoignition Temp Text: N/A Lower Limits: 3.3 Upper Limits: 19 Extinguishing Media CO2 OR FOAM Fire Fighting Procedures NO SPECIAL REQUIREMENTS Unusual Fire/Explosion Hazard NONE
Personal Protection
Respiratory Protection N/P Ventilation LOCAL EXHAUST AND MECHANICAL Protective Gloves YES Eye Protection YES Other Protective Equipment N/P Work Hygienic Practices N/P Supplemental Safety and Health AIR STATION INDUSTRIAL PARK/ROCKLAND, MASSACHUSETTS 02370
ACCELERATOR : TRANSWORLD ADHESIVE & CHEMICAL CO... http://www.msdss.com/pdf/002770.htm
5 of 6 10/7/2005 9:13 PM
Stability and Reactivity Data
Stability Indicator/Materials to Avoid: YES N/P Stability Condition to Avoid: N/P Hazardous Decomposition Products: N/P Hazardous Polymerization Indicator: NO Conditions to Avoid Polymerization: N/P
Toxicological Information
Toxicological Information: N/P
Ecological Information
Ecological: N/P
MSDS Transport Information
Transport Information: N/P
Regulatory Information
SARA Title III Information: N/P Federal Regulatory Information: N/P State Regulatory Information: N/P
Other Information
Other Information: N/P
HAZCOM Label
Product ID: ACCELERATOR CAGE: 59888 Assigned Ind: N Company Name: TRANSWORLD ADHESIVE AND CHEMICAL CORP Street: AIR STATION INDUSTRIAL PK PO Box: City: ROCKLAND State: MA ZIP: 02370-1137 Country: US Health Emergency Phone: (617) 878-7015 Label Required Ind: Y Date of Label Review: 12/16/1998 Status Cd: C Mfg Label Num:
ACCELERATOR : TRANSWORLD ADHESIVE & CHEMICAL CO... http://www.msdss.com/pdf/002770.htm
6 of 6 10/7/2005 9:13 PM
Label Date: 12/16/1998 Year Procured: N/K Origination Cd: G Chronic Hazard Ind: N/P Eye Protection Ind: N/P Skin Protection Ind: N/P Signal Word: N/P Respiratory Protection Ind: N/P Health Hazard: Contact Hazard: Fire Hazard: Reactivity Hazard: Hazard And Precautions SKIN AND EYE IRRITATION. HIGH EXPOSURE CAUSES NARCOSIS.
DEBONDER : NCH DYNA SYSTEMS DIV http://www.msdss.com/pdf/098458.htm
1 of 6 10/7/2005 9:12 PM
First Aid Measures Fire Fighting Measures Manufacturer/Responsible Party Personal Protection Physical-Chemical Properites Accidental Release Measures Handling/Storage Chemical Ingredients HAZCOM Label
Product Identification
Product ID: DEBONDER MSDS Date: 12/15/1988 Tech Review: 08/17/1992 FSC: 6850 NIIN: LIIN: 00F024467 MSDS Number: 098458 Submitter: F BT Status Cd: C MFN: 01 Article: N Kit Part: N
Manufacturer-Responsible Party
Company Name: NCH DYNA SYSTEMS DIV Address: 2727 CHEMSEARCH BLVD Box: 655326 City: DALLAS State: TX ZIP: 75265-5326 Country: US Info Phone Num: (214) 438-1381 Emergency Phone Num: (214) 438-1381 Resp. Party Other MSDS Num.: Preparer's Name: RICHARD STOLLEY Chemtrec Ind/Phone: Proprietary Ind: N Review Ind: Y Published: Y CAGE: 0PH16 Special Project Cd: N
Preparer Co. other than Responsible Party Co.
Company Name: NCH DYNA SYSTEMS DIV Address: 2727 CHEMSEARCH BLVD Box: City: DALLAS State: TX ZIP: 75265-5326 CAGE: 0PH16 Assigned Ind: N
Contractor Identification
DEBONDER : NCH DYNA SYSTEMS DIV http://www.msdss.com/pdf/098458.htm
2 of 6 10/7/2005 9:12 PM
Company Name: NCH DYNA SYSTEMS DIV Address: 2727 CHEMSEARCH BLVD Box: City: DALLAS State: TX ZIP: 75265-5326 Country: US Phone: 800-336-0450/214-438-1381 Contract Num: CAGE: 0PH16
LD50 LC50 Mixture : N/K Route of Entry Inds - Inhalation: YES Skin: NO Ingestion: NO Carcinogenicity Inds - NTP: NO IARC: NO OSHA: NO Health Hazards Acute and Chronic INHALATION: WEAKNESS, FLUSHING OF THE FACE & TEMPORARY BRONCHIALTIGHTNESS. EYES: IRRITATION. Explanation of Carcinogenicity
DEBONDER : NCH DYNA SYSTEMS DIV http://www.msdss.com/pdf/098458.htm
3 of 6 10/7/2005 9:12 PM
NONE Signs and Symptions of Overexposure INHALATION: WEAKNESS, FLUSHING OF THE FACE & TEMPORARY BRONCHIALTIGHTNESS. EYES: IRRITATION. Medical Cond Aggravated by Exposure N/K
First Aid Measures
First Aid INHALATION: REMOVE TO FRESH AIR, IF BREATHING STOPS GIVE ARTIFICIALRESPIRATION. EYES: FLUSH W/WATER FOR 15 MIN. SKIN: FLUSH W/WATER. INGESTION:DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Accidental Release Measures
Spill Release Procedures CONTAINMENT IF POSSIBLE BY BUILDING TEMPORARY DIKES WITH DIRT & BYREMOVING FOR POLLUTION CONTROL. Neutralizing Agent N/K
Disposal Considerations
Waste Disposal Methods DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, & FEDERAL REGULATIONS.
Handling and Storage
Handling and Storage Precautions AVOID HIGH CONCENTRATIONS OF VAPORS & STORE AT AMBIENT TEMPERATURES. Other Precautions AVOID GROSS CONTAMINATION OF SKIN.
Fire Fighting Measures
Flash Point Method: TCC Flash Point: Flash Point Text: 45F Autoignition Temp: Autoignition Temp Text: N/A Lower Limits: N/K Upper Limits: N/K Extinguishing Media FOAM & CO2 Fire Fighting Procedures MECHANICAL FOAM OF THE ALCOHOL TYPE. WATER SHOULD BE USED TO KEEPFIRE-EXPOSED CONTAINERS COOL.
DEBONDER : NCH DYNA SYSTEMS DIV http://www.msdss.com/pdf/098458.htm
Respiratory Protection IN NON-VENTILATED AREA USE AIR PAK OR SIMILAR BREATHING AIR EQUIPMENT. Ventilation GENERAL EXHAUST Protective Gloves NEOPRENE Eye Protection GOGGLES Other Protective Equipment N/K Work Hygienic Practices WASH OFF SKIN W/SOAP & WATER Supplemental Safety and Health N/K
Stability Indicator/Materials to Avoid: YES PERCHLORATES, STRONG ACIDS,SULFURIC/CHLOROSULFONIC ACID. Stability Condition to Avoid: STRONG ACIDS Hazardous Decomposition Products: CYNANIDES UPON THERMAL DECOMPOSITION, OXIDES
DEBONDER : NCH DYNA SYSTEMS DIV http://www.msdss.com/pdf/098458.htm
5 of 6 10/7/2005 9:12 PM
OF NITROGEN. Hazardous Polymerization Indicator: NO Conditions to Avoid Polymerization: N/K
Toxicological Information
Toxicological Information: N/P
Ecological Information
Ecological: N/P
MSDS Transport Information
Transport Information: N/P
Regulatory Information
SARA Title III Information: N/P Federal Regulatory Information: N/P State Regulatory Information: N/P
Other Information
Other Information: N/P
HAZCOM Label
Product ID: DEBONDER CAGE: 0PH16 Assigned Ind: N Company Name: NCH DYNA SYSTEMS DIV Street: 2727 CHEMSEARCH BLVD PO Box: City: DALLAS State: TX ZIP: 75265-5326 Country: US Health Emergency Phone: (214) 438-1381 Label Required Ind: Y Date of Label Review: 08/17/1992 Status Cd: C Mfg Label Num: N/R Label Date: 08/17/1992 Year Procured: N/K Origination Cd: F Chronic Hazard Ind: Y Eye Protection Ind: YES
DEBONDER : NCH DYNA SYSTEMS DIV http://www.msdss.com/pdf/098458.htm
6 of 6 10/7/2005 9:12 PM
Skin Protection Ind: N/P Signal Word: WARNING Respiratory Protection Ind: N/P Health Hazard: Slight Contact Hazard: Slight Fire Hazard: Moderate Reactivity Hazard: None Hazard And Precautions INHALATION: WEAKNESS, FLUSHING OF THE FACE & TEMPORARY BRONCHIAL TIGHTNESS. EYES: IRRITATION. TARGET ORGANS:RESPIRATORY SYSTEM, SKIN, EYES
First Aid Measures Fire Fighting Measures Manufacturer/Responsible Party Personal Protection Physical-Chemical Properites Accidental Release Measures Handling/Storage Chemical Ingredients HAZCOM Label
Product Identification
Product ID: CARBON FIBER PVP SIZEA/1 SIZEPI SIZE MSDS Date: 10/01/1985 Tech Review: 10/02/1989 FSC: 9390 NIIN: LIIN: 00N011161 MSDS Number: 053447 Submitter: N EN Status Cd: C MFN: 01 Article: N Kit Part: N
Manufacturer-Responsible Party
Company Name: CELION CARBON FIBERS Address: Box: 7687 City: CHARLOTTE State: NC ZIP: 28217 Country: NK Info Phone Num: 704-588-5288 Emergency Phone Num: 803-329-8051;704-588-5288 Resp. Party Other MSDS Num.: Preparer's Name: N/P Chemtrec Ind/Phone: Proprietary Ind: Y Review Ind: Y Published: Y CAGE: CELIO Special Project Cd: N
Contractor Identification
Company Name: CELION CARBON FIBERS Address: UNKNOWN Box: 7687 City: CHARLOTTE State: NC ZIP: 28217 Country: NK Phone: 704-588-5288 Contract Num: CAGE: CELIO
LD50 LC50 Mixture : N/K (FP N/ORNL) Route of Entry Inds - Inhalation: NO Skin: NO Ingestion: NO Carcinogenicity Inds - NTP: NO IARC: NO OSHA: NO Health Hazards Acute and Chronic MECHANICAL DERMATITIS PRODUCING ITCHING & IRRITATION MAY OCCUR FROM EXPOSURE TO BROKEN FILAMENTS OR LOOSE PARTICLES OF CARBON FIBER. Explanation of Carcinogenicity NONE Signs and Symptions of Overexposure EYES:NO SPEC INFO AVAIL;PARTICLES MAY CAUSE DISCOMFORT/SLIGHT IRRIT.SKIN:MECH DERMAT W/ ITCHING,IRRIT MAY OCCUR FROM EXPOS TO BROKEN FILAMENTS,LOOSE FIBERPARTICLES.INGEST:NO SPEC INFO AVAIL.INHAL:YEAR-LONG REPEAT ANIMAL STUDY W/ 77 MICRON D IAMETER UNSIZE FIBER DID NOT PRODUCE SIGNIFICANT EFFECTS/RESPONSE. Medical Cond Aggravated by Exposure N/K (FP N/ORNL)
First Aid Measures
First Aid EYES:FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MIN.IF IRRIT OCCURS,SEEK MEDATTENTION.SKIN:WASH AREA WITH MILD SOAP & WATER.IF ANY SKIN IRRIT OCCURS,SEEK MEDICAL ATTENTION.INGESTION:CALL MD IMMEDIATELY (FP N).INHALATION:REMOVVE TO FRESH AIR .SUPPORT BREAHING (GIVE O*2/ARTIFICIAL RESPIRATION) (FP N).
Accidental Release Measures
Spill Release Procedures USE FILTERED VACUUM CLEANER OR WET SWEEPING METHODS TO COLLECT LOOSEMATERIAL;AVOID GENERATING AIRBORNE FIBROUS PARTICLES DURING CLEANUPOPERATIONS. Neutralizing Agent N/K (FP N/ORNL)
Disposal Considerations
Waste Disposal Methods DISPOSAL MUST BE IN ACCORDANCE W/ FEDERAL,STATE & LOCAL REGS (FP N).DO NOTINCINERATE.WASTE MATERIAL SHOULD BE BAGGED OR CONTAINERIZED,SEALED,DISPOSED OF IN AN APPROVED LANDFILL.PRODUCT AS SHIPPED IS NOT CONSIDERED HAZ WASTE UUNDER CURRENT R CRA REGS.
Handling and Storage Precautions STORE IN ORIGINAL CONTRS.AVOID GENERATING FIBER DUST OR FLY.PROTECT ELECEQUIP,ENCLOSURES,CIRCUITS AGAINST INFILTRATION/CONT W/ PARTICLES/FILAMENTS. Other Precautions TO AVOID INGESTION INCIDENTAL TO HANDLING,FOOD ANDTOBACCO SHOULD NOT BEPRESENT IN WORK AREA.
Fire Fighting Measures
Flash Point Method: N/P Flash Point: Flash Point Text: N/K (FP N/ORNL) Autoignition Temp: Autoignition Temp Text: N/A Lower Limits: N/K (FP N) Upper Limits: N/K (FP N) Extinguishing Media N/K (FP N/ORNL) Fire Fighting Procedures USE NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT (FP N). Unusual Fire/Explosion Hazard CARBON FIBER,DUST & FIBROUS PARTICLES ARE ELECTRICALLY CONDUCTIVE & CAN CAUSE SHORTING IN ELECTRICAL EQUIPMENT.EXPLOSIVE SHORTING OF HIGH VOLTAGESYSTEMS POSS.
Personal Protection
Respiratory Protection NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN (FP N). Ventilation LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR CONCENTRATION BELOWLEVEL OF CONCERN (FP N/ORNL). Protective Gloves APPROPRIATE WHEN HANDLING. Eye Protection SAFETY GLASSES Other Protective Equipment MAINTAIN AREA FREE OF LOOSE MATL.BARRIER CREAMS,LONG SLEEVE GARMENTS. Work Hygienic Practices USE PROPER WORK PRACTICES & GOOD PERSONAL HYGIENE WHEN HANDLING PRODUCT. Supplemental Safety and Health EXPOSURE LIMITS:NONE SPECIFIC FOR THIS PRODUCT.FILAMENT DIAMETER:7X10(-6) M.FILAMENT COUNT:FROM 1000 TO 12000 FILAMENTS,DEPENDING ON GRADE.ROUTES OFENTRY:INHALATION/SKIN/INGESTION (FP N).
Stability Indicator/Materials to Avoid: YES NO KNOWN INCOMPATIBILITIES. Stability Condition to Avoid: N/K (FP N/ORNL) Hazardous Decomposition Products: N/K (FP N/ORNL) Hazardous Polymerization Indicator: NO Conditions to Avoid Polymerization: WILL NOT OCCUR.
Toxicological Information
Toxicological Information: N/P
Ecological Information
Ecological: N/P
MSDS Transport Information
Transport Information: N/P
Regulatory Information
SARA Title III Information: N/P Federal Regulatory Information: N/P State Regulatory Information: N/P
Responsible Party CAGE: CELIO Trans ID Num: 17807 Product ID: CARBON FIBER PVP SIZE,A/1 SIZE,PI SIZE MSDS Prepared Date: 10/01/1985 Review Date: 09/20/1990 MFN: 1 Submitter: N TN Status Cd: C Article w/o MSDS : N Tech Entry NOS Shipping Nm: Radioactivity: Form: Net Explosive Weight: Coast Guard Ammo Cd: Magnetism: N/P Net Unit Weight: AF MMAC Cd: DOD Exemption Num: Limited Qty Ind: Multiple Kit Num: 0 Kit Ind: N Kit Part Ind: N Review Ind: Y Unit of Issue: NK Container Qty: NK Type of Container: Additional Data: NOT REGULATED FOR TRANSPORTATION
Detail DOT Information
DOT PSN Cd: ZZZ Symbols: N/R DOT Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION DOT PSN Modifier: Hazard Class: N/R UN ID Num: N/R DOT Packaging Group: N/R Label: N/R Special Provision: N/R Packaging Exception: N/R Non Bulk Pack: N/R Bulk Pack: N/R Max Qty Pass: N/R
Product ID: CARBON FIBER PVP SIZE,A/1 SIZE,PI SIZE CAGE: CELIO Assigned Ind: Y Company Name: CELION CARBON FIBERS Street: UNKNOWN PO Box: 7687 City: CHARLOTTE State: NC ZIP: 28217 Country: NK Health Emergency Phone: 803-329-8051;704-588-5288 Label Required Ind: Y Date of Label Review: 12/16/1998 Status Cd: C Mfg Label Num: Label Date: 12/16/1998 Year Procured: N/K Origination Cd: G Chronic Hazard Ind: N/P Eye Protection Ind: N/P Skin Protection Ind: N/P Signal Word: N/P Respiratory Protection Ind: N/P Health Hazard: Contact Hazard: Fire Hazard: Reactivity Hazard: Hazard And Precautions MECHANICAL DERMATITIS PRODUCING ITCHING & IRRITATION MAYOCCUR FROM EXPOSURE TO BROKEN FILAMENTS OR LOOSE PARTICLES OF CARBON FIBER. EYES:NO SPEC INFO AVAIL;PARTICLES MAY CAUS DISCOMFORT/SLIGHT IRRIT.SKIN:MECH DERMAT W/ ITCHINGG,IRRIT MAY OCCUR FROM EXPOS TO BROKEN FILAMENTS,LOOSE FIBER PARTI CLES.INGEST:NO SPEC INFO AVAIL.INHAL:YEAR-LONG REPEAT ANIMAL STUDY W/ 7 MICRON DIAMETER UNSIZED FIBER DID NOT PRODUCE SIGNIFICANTEFFECTSRESPONSE.
First Aid Measures Fire Fighting Measures Manufacturer/Responsible Party Personal Protection Physical-Chemical Properites Accidental Release Measures Handling/Storage Chemical Ingredients HAZCOM Label
Product Identification
Product ID: FIBERGLASS RESIN MSDS Date: 01/01/1985 Tech Review: 07/17/1985 FSC: 6850 NIIN: LIIN: 00F001700 MSDS Number: 002722 Submitter: F BT Status Cd: C MFN: 01 Article: N Kit Part: N
Manufacturer-Responsible Party
Company Name: UNICAN CORP. Address: Box: City: N/P State: NK ZIP: 00000 Country: NK Info Phone Num: Emergency Phone Num: (617) 845-4581 Resp. Party Other MSDS Num.: Preparer's Name: N/P Chemtrec Ind/Phone: Proprietary Ind: Y Review Ind: Y Published: Y CAGE: EO605 Special Project Cd: N
Contractor Identification
Company Name: UNICAN CORP Address: 915 HARTFORD PIKE Box: City: SHREWSBURY State: MA ZIP: 01545-4148 Country: US Phone: 800-225-7332/617-845-4581 Contract Num: CAGE: 22510 Company Name: UNICAN CORP. Address: UNKNOWN
LD50 LC50 Mixture : N/P Route of Entry Inds - Inhalation: N/P Skin: N/P Ingestion: N/P Carcinogenicity Inds - NTP: N/P IARC: N/P OSHA: N/P Health Hazards Acute and Chronic N/P Explanation of Carcinogenicity N/P Signs and Symptions of Overexposure SKIN AND EYE IRRITATION. MAY CAUSE DEPRESSION OF NERVOUS SYSTEM AND GIVEANESTHETIC EFFECT. Medical Cond Aggravated by Exposure N/P
First Aid Measures
First Aid EYE CONTACT - FLUSH WITH WATER 15 MINUTES AND CONSULT PHYSICIAN. INHALATION -REMOVE TO FRESH AIR. USE OXYGEN OR ARTIFICIAL RESPIRATION IF NECESSARY. INGESTION: IMMEDIATELY SEEK MEDICAL ATTENTION.
Accidental Release Measures
Spill Release Procedures ABSORB WITH INERT MATERIAL SUCH AS VERMICULITE, SAND, ETC. SWEEP UP & COLLECTIN CONINER TO BE DISPOSED OF AS SOLID WASTE. WASH AREA WITH TRISODIUM PHOSPHATAND WATER. EXTINGUISH ALL SOURCES OF FLAME & IGNITION. Neutralizing Agent N/P
Disposal Considerations
Waste Disposal Methods USE APPROVED LANDFILL OR INCINERATION. DISPOSE OF IN ACCORDANCE WITH LOCAL,
Handling and Storage Precautions STORE BELOW 90F IN COOL DRY PLACE. KEEP OUT OF REACH OF CHILDREN, ISOLATEDFROM FOOD AND DRINKKEEP AWAY FROM SOURCES OF HEAT AND IGNITION. Other Precautions USE EXPLOSION PROOF EQUIPMENT. OPEN CONTAINERS SLOWLY TORELIEVE ANY INTERNAL PRESSURE. USE WITH ADEQUATE VENTILATION.
Fire Fighting Measures
Flash Point Method: N/P Flash Point: Flash Point Text: 96F TOC Autoignition Temp: Autoignition Temp Text: N/A Lower Limits: 1.1% Upper Limits: 6.1% Extinguishing Media DRY CHEMICAL, CO2, WATERSPRAY AND FOAM Fire Fighting Procedures USE WATER TO COOL FIRE EXPOSED CONTAINERS. Unusual Fire/Explosion Hazard IF EXPOSED TO ELEVATED TEMPS FOR EXTENDED LENGTH OF TIME, SPONTANEOUSEXETHERMIC POLYMERIZATION OCC.
Personal Protection
Respiratory Protection RECOMMENDED-CHEMICAL RESPIRATOR WITH SELF-CONTAINED AIR SUPPLY. Ventilation LOCAL EXHAUST RECOMMENDED/MECHANICAL RECOMMENDED Protective Gloves NEOPRENE/PLASTI Eye Protection FACE SHIELD OR GLASSES Other Protective Equipment PROTECTIVE CLOTHING & SHOES. SAFETY SHOWERS & EYE WASH. Work Hygienic Practices N/P Supplemental Safety and Health 915 HARTFORD PIKE/SHREWSBURY, MA 01545.
Product ID: FIBERGLASS RESIN CAGE: EO605 Assigned Ind: Y Company Name: UNICAN CORP. Street: UNKNOWN PO Box: City: UNKNOWN State: NK ZIP: 00000 Country: NK Health Emergency Phone: (617) 845-4581 Label Required Ind: Y Date of Label Review: 12/16/1998 Status Cd: C Mfg Label Num: Label Date: 12/16/1998 Year Procured: N/K Origination Cd: G Chronic Hazard Ind: N/P Eye Protection Ind: N/P Skin Protection Ind: N/P Signal Word: N/P Respiratory Protection Ind: N/P Health Hazard: Contact Hazard: Fire Hazard: Reactivity Hazard: Hazard And Precautions SKIN AND EYE IRRITATION. MAY CAUSE DEPRESSION OF NERVOUSSYSTEM AND GIVE ANESTHETIC EFFECT.
First Aid Measures Fire Fighting Measures Manufacturer/Responsible Party Personal Protection Physical-Chemical Properites Accidental Release Measures Handling/Storage Chemical Ingredients HAZCOM Label
Product Identification
Product ID: FIBERGLASS LIQUID HARDENER MSDS Date: 01/01/1987 Tech Review: 01/14/1988 FSC: 8030 NIIN: LIIN: 00F003864 MSDS Number: 006226 Submitter: F BT Status Cd: C MFN: 02 Article: N Kit Part: N
Manufacturer-Responsible Party
Company Name: GO-JO INDUSTRIES, INC/AKRON, OH 44309 Address: Box: City: N/P State: NK ZIP: 00000 Country: NK Info Phone Num: Emergency Phone Num: (216) 920-8100 Resp. Party Other MSDS Num.: Preparer's Name: N/P Chemtrec Ind/Phone: Proprietary Ind: N Review Ind: Y Published: Y CAGE: 02905 Special Project Cd: N
LD50 LC50 Mixture : N/P Route of Entry Inds - Inhalation: N/P Skin: N/P Ingestion: N/P Carcinogenicity Inds - NTP: N/P IARC: N/P OSHA: N/P Health Hazards Acute and Chronic N/P Explanation of Carcinogenicity N/P Signs and Symptions of Overexposure MODERATE SKIN IRRITANT, EXTREMELY IRRITATING & CORROSIVE TO EYES. Medical Cond Aggravated by Exposure N/P
First Aid Measures
First Aid SKIN: WASH WITH SOAP & WATER. EYES: FLUSH WITH WATER AT LEAST 15 MINUTES,CONTACT PHYSICIAN. INHALATION: REMOVE TO FRESH AIR. INGESTION: IMMEDIATELY ADMINISTER MILK & WATER, CONSULT PHYSICIAN.
Accidental Release Measures
Spill Release Procedures SPILLED MATERIAL SHOULD BE ABSORBED ON NONCOMBUSTIBLE MATERIAL. REMOVEWITH NONSPARKG TOOLS AND WET WITH WATER. Neutralizing Agent N/P
Disposal Considerations
Waste Disposal Methods IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS.
Handling and Storage
Handling and Storage Precautions STORE AWAY FROM HAZARDOUS MATERIALS, HEAT AND IGNITION SOURCES. Other Precautions STORE <100F PREFERABLY 60-85%F. AVOID CONTACT WITH SKIN& EYES.
Flash Point Method: N/P Flash Point: Flash Point Text: >160F (SF) Autoignition Temp: Autoignition Temp Text: N/A Lower Limits: N/K Upper Limits: N/K Extinguishing Media FOAM, CO2 Fire Fighting Procedures POTENTIAL EXPLOSION HAZARD, WATER COOL CONTAINERS. Unusual Fire/Explosion Hazard DON'T ADD ANY HOT MATERIAL. PREV. CONTAMINATION W/ALL MATERIALS ESPECIALLYOXIDIZABLES/ACCELERATORS.
Personal Protection
Respiratory Protection AIR SUPPLIED RESPIRATOR IF >TLV. Ventilation LOCAL EXHAUST/MECHANICAL Protective Gloves CHEM-RESISTANT Eye Protection SAFETY GOGGLES Other Protective Equipment EYE BATH SHOULD BE AVAILABLE. Work Hygienic Practices N/P Supplemental Safety and Health MSDS DATE: 11/1/85.
Health Emergency Phone: (216) 920-8100 Label Required Ind: Y Date of Label Review: 12/16/1998 Status Cd: C Mfg Label Num: Label Date: 12/16/1998 Year Procured: N/K Origination Cd: G Chronic Hazard Ind: N/P Eye Protection Ind: N/P Skin Protection Ind: N/P Signal Word: N/P Respiratory Protection Ind: N/P Health Hazard: Contact Hazard: Fire Hazard: Reactivity Hazard: Hazard And Precautions MODERATE SKIN IRRITANT, EXTREMELY IRRITATING & CORROSIVETO EYES.
AMCO C FLUX : FORCE CHEMICALS DIVISION http://www.msdss.com/pdf/000056.htm
1 of 9 10/7/2005 9:21 PM
First Aid Measures Fire Fighting Measures Manufacturer/Responsible Party Personal Protection Physical-Chemical Properites Accidental Release Measures Handling/Storage Chemical Ingredients HAZCOM Label
Product Identification
Product ID: AMCO C FLUX MSDS Date: 06/01/1988 Tech Review: 07/29/1988 FSC: 3439 NIIN: LIIN: 00B010057 MSDS Number: 000056 Submitter: B DT Status Cd: C MFN: 01 Article: N Kit Part: N
Manufacturer-Responsible Party
Company Name: FORCE CHEMICALS DIVISION Address: 28 INDUSTRIAL BLVD. Box: City: PAOLI State: PA ZIP: 19301 Country: US Info Phone Num: 215647-3575 Emergency Phone Num: N/K Resp. Party Other MSDS Num.: Preparer's Name: N/K Chemtrec Ind/Phone: Proprietary Ind: N Review Ind: Y Published: Y CAGE: DO821 Special Project Cd: N
Contractor Identification
Company Name: AMERICAN SOLDER AND FLUX CO INC FORCE CHEMICAL DIV Address: 28 INDUSTRIAL BLVD Box: City: PAOLI State: PA ZIP: 19301 Country: US Phone: 800-424-9300 Contract Num: CAGE: 70540 Company Name: FORCE CHEMICALS DIVISION-AMERICAN SOLDER & FLUX CO Address: 28 INDUSTRIAL BLVD.
AMCO C FLUX : FORCE CHEMICALS DIVISION http://www.msdss.com/pdf/000056.htm
2 of 9 10/7/2005 9:21 PM
Box: N/K City: PAOLI State: PA ZIP: 19301 Country: US Phone: 215647-3575 Contract Num: CAGE: DO821
AMCO C FLUX : FORCE CHEMICALS DIVISION http://www.msdss.com/pdf/000056.htm
6 of 9 10/7/2005 9:21 PM
Skin: YES Ingestion: YES Carcinogenicity Inds - NTP: N/P IARC: N/P OSHA: N/P Health Hazards Acute and Chronic N/K Explanation of Carcinogenicity N/K Signs and Symptions of Overexposure CHEMICAL BURNS TO DIGESTIVE SYSTEM AND MUCOSAL SURFACES.MAY BE FATAL IF INGESTED.INHALATION:IRRITATION TO RESPIRATORY SYSTEM.MAY BE FATAL IF INHALED.SKIN CONTACT:DERMATITIS,CHEMICAL BURN FROM CONTINUED CONTACT.EYE CONTACT:IRRITATIOON TO EYES .BURN TO EYE SRFACES THAT MAY RESULT INBLINDNESS. Medical Cond Aggravated by Exposure PRE-EXISTING LUNG & SKIN DISORDERS WILL BE AGGRAVATED.
First Aid Measures
First Aid SWALLOWING:DO NOT INDUCE VOMITING.SEEK MED.ATTN.IMMEDIATELY.CONTACT YOURPOISON CONTROL CENTER OR PHYSICIAN.INGESTION MAY BE FATAL.SKIN:WASH THOROUGHLY W/SOAP AND WATER TO REMOVE ALL RESIDUE.CALL A PHYSICIAN.INHALATION:REMOVE TO FFRESH AIR.C ALL A PHYSICIN.INHALATION OF FUMES MAY BE FATAL.EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES TO REMOVE ALL RESIDUE.GET MEDICAL ATTN.IMMEDIATELY.
Accidental Release Measures
Spill Release Procedures BEING A VISCOUS PASTE,ABSORB AND CONTAIN THE SPILL AND DISPOSE.WATER WASHTHE CONTAMINATED AREA AND DISPOSE IN CHEMICAL SEWER. Neutralizing Agent N/K
Disposal Considerations
Waste Disposal Methods DISPOSE IN ACCORDANCE WITH ALL FEDERAL,STATE AND LOCAL REGULATIONS.
Handling and Storage
Handling and Storage Precautions STORE THE MATERIAL IN CLOSED CONTAINERS AT AMBIENT CONDITIONS. Other Precautions
AMCO C FLUX : FORCE CHEMICALS DIVISION http://www.msdss.com/pdf/000056.htm
7 of 9 10/7/2005 9:21 PM
SHORT TERM TOXIC EFFECTS INCLUDE THOSE TO LIVER ANDKIDNEYS.WASH HANDS THOROUGHLY AFTER HANDLING TO REMOVE ALLRESIDUE.PROFESSIONALLY WASH CONTAMINATED CLOTHING BEFORE RE-USE.DO NOT TAKEINTERNALLY OR BREATHEFUMES.
Fire Fighting Measures
Flash Point Method: TCC Flash Point: Flash Point Text: 230 F Autoignition Temp: Autoignition Temp Text: N/A Lower Limits: N/R Upper Limits: N/R Extinguishing Media WATER,FOG,OR FOAM Fire Fighting Procedures NONE Unusual Fire/Explosion Hazard MAY RELEASE TOXIC FUMES IF INVOLVED IN A FIRE.
Personal Protection
Respiratory Protection USE NIOSH APPROVED MASK,IF WORK STATION IS NOT PROPERLY VENTILATED TOREMOVE ALL FUMES AND VAPORS. Ventilation MAINTAIN AIR FLOW AWAY FROM USER TO EXHAUST ALL FUMES AND VAPORS SO THATTHE TLV IS NEVER EXCEEDED. Protective Gloves CHEMICAL/IMPERVIOUS GLOVES Eye Protection CHEMICAL SAFETY GOGGLES Other Protective Equipment PROTECTION EQUIPMENT USED IN A SOLDERING OPERATION SO AS TO PREVENT ANYCONTACT. Work Hygienic Practices N/K Supplemental Safety and Health N/K
AMCO C FLUX : FORCE CHEMICALS DIVISION http://www.msdss.com/pdf/000056.htm
8 of 9 10/7/2005 9:21 PM
Volatile Org Content %: Spec Gravity: 1.59 VOC Pounds/Gallon: pH: N/K VOC Grams/Liter: Viscosity: N/P Evaporation Rate & Reference: N/R Solubility in Water: APPRECIABLE Appearance and Odor: SMOOTH GREY PASTE WITH NO CHARACTERISTIC ODOR. Percent Volatiles by Volume: 26.3 Corrosion Rate: N/K
Stability and Reactivity Data
Stability Indicator/Materials to Avoid: YES CYANIDES AND SULFIDES Stability Condition to Avoid: NONE Hazardous Decomposition Products: HYDROGEN CHLORIDE,ZINC OXIDE,NITROGEN OXIDES Hazardous Polymerization Indicator: NO Conditions to Avoid Polymerization: NONE
Toxicological Information
Toxicological Information: N/P
Ecological Information
Ecological: N/P
MSDS Transport Information
Transport Information: N/P
Regulatory Information
SARA Title III Information: N/P Federal Regulatory Information: N/P State Regulatory Information: N/P
Other Information
Other Information: N/P
HAZCOM Label
AMCO C FLUX : FORCE CHEMICALS DIVISION http://www.msdss.com/pdf/000056.htm
9 of 9 10/7/2005 9:21 PM
Product ID: AMCO C FLUX CAGE: DO821 Assigned Ind: Y Company Name: FORCE CHEMICALS DIVISION-AMERICAN SOLDER & FLUX CO Street: 28 INDUSTRIAL BLVD. PO Box: N/K City: PAOLI State: PA ZIP: 19301 Country: US Health Emergency Phone: N/K Label Required Ind: Y Date of Label Review: 12/16/1998 Status Cd: C Mfg Label Num: Label Date: 12/16/1998 Year Procured: N/K Origination Cd: G Chronic Hazard Ind: N/P Eye Protection Ind: N/P Skin Protection Ind: N/P Signal Word: N/P Respiratory Protection Ind: N/P Health Hazard: Contact Hazard: Fire Hazard: Reactivity Hazard: Hazard And Precautions N/K CHEMICAL BURNS TO DIGESTIVE SYSTEM AND MUCOSAL SURFACES.MAY BE FATAL IF INGESTED.INHALATION:IRRITATION TO RESPIRATORY SYSTEM.MAY BE FATAL IF INHALED.SKIN CONTAC T:DERMATITS,CHEMICAL BURN FROM CONTINUED CONTACT.EYE CONTACT:IRRITTATION TO EYES.BURN TO EYE SURFACES THATMAY RESULT IN BLINDNESS.
First Aid Measures Fire Fighting Measures Manufacturer/Responsible Party Personal Protection Physical-Chemical Properites Accidental Release Measures Handling/Storage Chemical Ingredients HAZCOM Label
Product Identification
Product ID: SOLDER MSDS Date: 01/01/1987 Tech Review: 05/13/1987 FSC: 3424 NIIN: LIIN: 00D000854 MSDS Number: 001022 Submitter: D DG Status Cd: C MFN: 01 Article: N Kit Part: N
Manufacturer-Responsible Party
Company Name: TARACORP INDUSTRIES Address: Box: City: N/P State: NK ZIP: 00000 Country: NK Info Phone Num: Emergency Phone Num: 919-784-8110 Resp. Party Other MSDS Num.: Preparer's Name: N/P Chemtrec Ind/Phone: Proprietary Ind: N Review Ind: Y Published: Y CAGE: 84996 Special Project Cd: N
Contractor Identification
Company Name: TARACORP INDUSTRIES IMACO PLANT Address: 20 E ACADIA AVE Box: City: WINSTON-SALEM State: NC ZIP: 27108 Country: US Phone: UNKNOWN Contract Num: CAGE: 84996
LD50 LC50 Mixture : N/P Route of Entry Inds - Inhalation: N/P Skin: N/P Ingestion: N/P Carcinogenicity Inds - NTP: N/P IARC: N/P OSHA: N/P Health Hazards Acute and Chronic N/P Explanation of Carcinogenicity N/P Signs and Symptions of Overexposure LEAD DUST OR FUME:ABDOMINAL PAIN,LEAD-COLIC,LOSS OF WEIGHT,MUSCULARWEAKNESS;TIN OXIDE:NUISANCE DUST Medical Cond Aggravated by Exposure N/P
First Aid Measures
First Aid SKIN:IF MOLTEN,TREAT AS BURN;EYE:FLUSH WITH CLEAN WATER,IF MOLTEN,TREAT ASBURN;INH:REMOVE TO FRESH AIR;ING:WATER,VOMIT,REFER TO PHYSICIAN.
Accidental Release Measures
Spill Release Procedures WHEN MOLTEN,ALLOW TO COOL(SOLIDIFY). Neutralizing Agent N/P
Disposal Considerations
Waste Disposal Methods RETURN FOR SALVAGE.COMPLY WITH APPLICABLE FEDERAL,STATE & LOCALREGULATIONS.
Handling and Storage
Handling and Storage Precautions WASH HANDS AFTER CONSIDERABLE HANDLING.NO SMOKING OR EATING WHILEHANDLING MATERIAL. Other Precautions N/P
Status Cd: C Article w/o MSDS : N Tech Entry NOS Shipping Nm: Radioactivity: Form: Net Explosive Weight: Coast Guard Ammo Cd: Magnetism: N/P Net Unit Weight: AF MMAC Cd: DOD Exemption Num: Limited Qty Ind: Multiple Kit Num: 0 Kit Ind: N Kit Part Ind: N Review Ind: Y Unit of Issue: NK Container Qty: NK Type of Container: Additional Data:
Detail DOT Information
DOT PSN Cd: ZZZ Symbols: N/R DOT Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION DOT PSN Modifier: Hazard Class: N/R UN ID Num: N/R DOT Packaging Group: N/R Label: N/R Special Provision: N/R Packaging Exception: N/R Non Bulk Pack: N/R Bulk Pack: N/R Max Qty Pass: N/R Max Qty Cargo: N/R Vessel Stow Req: N/R Water/Ship/Other Req: N/R
Detail IMO Information
IMO PSN Cd: ZZZ IMO Proper Shipping Name: NOT REGULATED FOR THIS MODE OF TRANSPORTATION IMO PSN Modifier: IMDG Page Num: N/R UN Num: N/R UN Hazard Class: N/R IMO Packaging Group: N/R
Subsidiary Risk Label: N/R EMS Num: N/R Med First Aid Guide Num: N/R
Detail IATA Information
IATA PSN Cd: ZZZ IATA UN ID Num: N/R IATA Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION IATA PSN Modifier: IATA UN Class: N/R Subsidiary Risk Class: N/R IATA Label: N/R UN Packing Group: N/R Packing Note Passenger: N/R Max Qty Pass: N/R Packaging Note Cargo: N/R Max Qty Cargo: N/R Exceptions: N/R
Detail AFI Information
AFI PSN Cd: ZZZ AFI Symbols: AFI Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION AFI PSN Modifier: AFI Hazard Class: N/R AFI UN ID Num: N/R AFI Packing Group: N/R AFI Label: N/R Special Provisions: N/A Back Pack Reference: N/A
HAZCOM Label
Product ID: SOLDER CAGE: 84996 Assigned Ind: N Company Name: TARACORP INDUSTRIES IMACO PLANT Street: 20 E ACADIA AVE PO Box: City: WINSTON-SALEM State: NC ZIP: 27108 Country: US Health Emergency Phone: 919-784-8110 Label Required Ind: Y Date of Label Review: 12/16/1998 Status Cd: C Mfg Label Num: Label Date: 12/16/1998
Year Procured: N/K Origination Cd: G Chronic Hazard Ind: N/P Eye Protection Ind: N/P Skin Protection Ind: N/P Signal Word: N/P Respiratory Protection Ind: N/P Health Hazard: Contact Hazard: Fire Hazard: Reactivity Hazard: Hazard And Precautions LEAD DUST OR FUME:ABDOMINAL PAIN,LEAD-COLIC,LOSS OFWEIGHT,MUSCULAR WEAKNESS;TIN OXIDE:NUISANCE DUST
*** Emergency Overview ***: Contents Under Pressure. Harmful if inhaled. May affect the brain or nervous system causing dizziness, headache or nausea. Vapors may cause flash fire or explosion. Extremely flammable liquid and vapor. Harmful if swallowed.
Effects Of Overexposure - Eye Contact: Causes eye irritation.
Effects Of Overexposure - Skin Contact: Prolonged or repeated contact may cause skin irritation. Substance may cause slight skin irritation.
Effects Of Overexposure - Inhalation: High vapor concentrations are irritating to the eyes, nose, throat and lungs. Avoid breathing vapors or mists. High gas, vapor, mist or dust concentrations may be harmful if inhaled. Harmful if inhaled.
Effects Of Overexposure - Ingestion: Aspiration hazard if swallowed; can enter lungs and cause damage. Substance may be harmful if swallowed.
Effects Of Overexposure - Chronic Hazards: IARC lists Ethylbenzene as a possible human carcinogen (group 2B). May cause central nervous system disorder (e,g.,narcosis involving a loss of coordination, weakness, fatigue, mental confusion, and blurred vision) and/or damage. Reports have associated repeated and prolonged
Section 1 - Chemical Product / Company Information Product Name: Stops Rust Auto Primer Aerosol Revision Date: 05/06/2003 Identification Number: 2067830, 2081830, 2089830
Product Use/Class: Auto Primer/Aerosol Supplier: Rust -Oleum Corporation
11 Hawthorn Parkway Vernon Hills, IL 60061 USA
Manufacturer: Rust-Oleum Corporation 11 Hawthorn Parkway Vernon Hills, IL 60061 USA
Preparer: Department, Regulatory
Section 2 - Composition / Information On Ingredients
occupational overexposure to solvents with permanent brain and nervous system damage. Overexposure to xylene in laboratory animals has been associated with liver abnormalities, kidney, lung, spleen, eye and blood damage as well as reproductive disorders. Effects in humans, due to chronic overexposure, have included liver, cardiac abnormalities and nervous system damage. Overexposure to toluene in laboratory animals has been associated with liver abnormalities, kidney, lung and spleen damage. Effects in humans have included liver and cardiac abnormalities.
First Aid - Eye Contact: Hold eyelids apart and flush with plenty of water for at least 15 minutes. Get medical attention.
First Aid - Skin Contact: Wash with soap and water. Get medical attention if irritation develops or persists.
First Aid - Inhalation: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately.
First Aid - Ingestion: Aspiration hazard: Do not induce vomiting or give anything by mouth because this material can enter the lungs and cause severe lung damage. Get immediate medical attention.
Extinguishing Media: Dry Chemical, Foam, Water Fog
Unusual Fire And Explosion Hazards: Keep containers tightly closed. Vapors can travel to a source of ignition and flash back. Vapors may form explosive mixtures with air. FLASH POINT IS LESS THAN 20 DEG. F. - EXTREMELY FLAMMABLE LIQUID AND VAPOR! Closed containers may explode when exposed to extreme heat. Water spray may be ineffective. Perforation of the pressurized container may cause bursting of the can. Isolate from heat, electrical equipment, sparks and open flame.
Special Firefighting Procedures: Evacuate area and fight fire from a safe distance.
Steps To Be Taken If Material Is Released Or Spilled: Dispose of according to local, state (provincial) and federal regulations. Do not incinerate closed containers. Remove all sources of ignition, ventilate area and remove with inert absorbent and non-sparking tools. Contain spilled liquid with sand or earth. DO NOT use combustible materials such as sawdust.
Handling: Wash thoroughly after handling. Wash hands before eating. Use only in a well -ventilated area. Avoid breathing vapor or mist. Follow all MSDS/label precautions even after container is emptied because it may retain product residues.
Storage: Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame. Do not store above 120 degrees F. Store large quantities in buildings designed and protected for storage of NFPA Class I
flammable liquids. Contents under pressure. Do not expose to heat or store above 120 degrees F.
Engineering Controls: Prevent build-up of vapors by opening all doors and windows to achieve cross -ventilation. Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Use explosion-proof ventilation equipment.
Respiratory Protection: A NIOSH/MSHA approved air purifying respirator with an organic vapor cartridge or canister may be permissible under certain circumstances where airborne concentrations are expected to exceed exposure limits. Protection provided by air purifying respirators is limited. Use a positive pressure air supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known, or any other circumstances where air purifying respirators may not provide adequate protection. A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator's use.
Skin Protection: Nitrile or Neoprene gloves may afford adequate skin protection. Use impervious gloves to prevent skin contact and absorption of this material through the skin.
Eye Protection: Use safety eyewear designed to protect against splash of liquids.
Other protective equipment: Refer to safety supervisor or industrial hygienist for further information regarding personal protective equipment and its application.
Hygienic Practices: Wash thoroughly with soap and water before eating, drinking or smoking.
(See section 16 for abbreviation legend)
Conditions To Avoid: Avoid all possible sources of ignition. Avoid temperatures above 120 degrees F.
Incompatibility: Incompatible with strong oxidizing agents, strong acids and strong alkalies.
Hazardous Decomposition: When heated to decomposition it emits acrid smoke and irritating fumes. By open flame, carbon monoxide and carbon dioxide.
Hazardous Polymerization: Will not occur under normal conditions.
Stability: This product is stable under normal storage conditions.
Section 8 - Exposure Controls / Personal Protection
Section 9 - Physical And Chemical Properties Boiling Range: -34 - 284 F Vapor Density: Heavier than air Odor: Solvent Like Odor Threshold: ND Appearance: Liquid Evaporation Rate: Faster than Ether Solubility in H2O: Slight Freeze Point: ND Specific Gravity: Vapor Pressure: PH: NE Physical State: Liquid
Section 10 - Stability And Reactivity
Page 3 of 6
Ecological Information: Product is a mixture of listed components.
Disposal Information: Dispose of material in accordance to local, state and federal regulations and ordinances. Do not allow to enter storm drains or sewer systems.
CERCLA - SARA Hazard Category
This product has been reviewed according to the EPA "Hazard Categories" promulgated under Sections 311and 312 of the Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to meet the following categories:
IMMEDIATE HEALTH HAZARD, CHRONIC HEALTH HAZARD, FIRE HAZARD
SARA Section 313:
Listed below are the substances (if any) contained in this product that are subject to the reporting requirements of
Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372:
Toxic Substances Control Act:
Listed below are the substances (if any) contained in this product that are subject to the reporting requirements of TSCA 12(B) if exported from the United States:
None known
U.S. State Regulations: As follows -
New Jersey Right-to-Know:
The following materials are non-hazardous, but are among the top five components in this product.
none
Pennsylvania Right-to-Know:
The following non-hazardous ingredients are present in the product at greater than 3%.
California Proposition 65:
Warning: The following ingredients present in the product are known to the state of California to cause Cancer:
Warning: The following ingredients present in the product are known to the state of California to cause birth defects, or other reproductive hazards.
Chemical Name CAS NumberXylene 1330-20-7Toluene 108-88-3Alkyd Resin PROPRIETARYEthylbenzene 100-41-4Zinc Phosphate 7779-90-0Basic Zinc Molybdate 61583-60-6
Chemical Name CAS NumberRed Iron Oxide 1332-37-2
Chemical Name CAS NumberMicrocrystalline Silica 14808-60-7Lead Compounds NOT SPECIFIEDPROYLENE OXIDE 75-56-9Cadmium Compounds NOT SPECIFIEDArsenic Compounds NOT SPECIFIEDBeryllium Compounds NOT SPECIFIEDBenzene 71-43-2
Chemical Name CAS NumberToluene 108-88-3Lead Compounds NOT SPECIFIEDCadmium Compounds NOT SPECIFIED
Page 5 of 6
International Regulations: As follows -
CANADIAN WHMIS:
This MSDS has been prepared in compliance with Controlled Product Regulations except for the use of the 16 headings.
CANADIAN WHMIS CLASS: AB5 D2A D2B
VOLATILE ORGANIC COMPOUNDS, g/l: NA
REASON FOR REVISION:
Legend: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined
The information contained on this MSDS has been checked and should be accurate. However, it is the responsibility of the user to comply with all Federal, State, and Local laws and regulations.
Arsenic Compounds NOT SPECIFIEDMercury Compounds NOT SPECIFIEDEthylene Glycol Monoethyl Ether 110-80-5Benzene 71-43-2
Section 16 - Other Information
HMIS Ratings: Health: 2* Flammability: 4 Reactivity: 0 Personal Protection: X
Page 6 of 6
*** Emergency Overview ***: Contents Under Pressure. Vapors may cause flash fire or explosion. Extremely flammable liquid and vapor. Harmful if inhaled. May affect the brain or nervous system causing dizziness, headache or nausea. Harmful if swallowed.
Effects Of Overexposure - Eye Contact: Causes eye irritation.
Effects Of Overexposure - Skin Contact: Prolonged or repeated contact may cause skin irritation. Substance may cause slight skin irritation.
Effects Of Overexposure - Inhalation: Harmful if inhaled. High gas, vapor, mist or dust concentrations may be harmful if inhaled. Avoid breathing vapors or mists. High vapor concentrations are irritating to the eyes, nose, throat and lungs.
Effects Of Overexposure - Ingestion: Aspiration hazard if swallowed; can enter lungs and cause damage. Substance may be harmful if swallowed.
Effects Of Overexposure - Chronic Hazards: Excessive exposure to n -Hexane can result in damage to peripheral nerves. The initial symptoms are numbness of the fingers and toes. Motor weakness can also occur in the digits, but may involve muscles of the arms, thighs and forearms. The onset of these symptoms may be delayed for several months to a year after the beginning exposure. The neurtoxic properties of n-Hexane are potentiated by
Material Safety Data Sheet
24 Hour Assistance: 1-847-367-7700 ROC.
Section 1 - Chemical Product / Company Information
exposure to methyl ethyl ketone and methyl isobutyl ketone. May cause central nervous system disorder (e,g.,narcosis involving a loss of coordination, weakness, fatigue, mental confusion, and blurred vision) and/or damage. Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Overexposure to toluene in laboratory animals has been associated with liver abnormalities, kidney, lung and spleen damage. Effects in humans have included liver and cardiac abnormalities.
Primary Route(s) Of Entry: Skin Absorption, Inhalation, Eye Contact
First Aid - Eye Contact: Hold eyelids apart and flush with plenty of water for at least 15 minutes. Get medical attention.
First Aid - Skin Contact: Wash with soap and water. Get medical attention if irritation develops or persists.
First Aid - Inhalation: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately.
First Aid - Ingestion: Aspiration hazard: Do not induce vomiting or give anything by mouth because this material can enter the lungs and cause severe lung damage. Get immediate medical attention.
Extinguishing Media: Dry Chemical, Foam, Water Fog
Unusual Fire And Explosion Hazards: Keep containers tightly closed. Perforation of the pressurized container may cause bursting of the can. Vapors can travel to a source of ignition and flash back. Vapors may form explosive mixtures with air. Closed containers may explode when exposed to extreme heat. FLASH POINT IS LESS THAN 20 °. F. - EXTREMELY FLAMMABLE LIQUID AND VAPOR! Water spray may be ineffective. Isolate from heat, electrical equipment, sparks and open flame.
Special Firefighting Procedures: Evacuate area and fight fire from a safe distance.
Steps To Be Taken If Material Is Released Or Spilled: Dispose of according to local, state (provincial) and federal regulations. Do not incinerate closed containers. Remove all sources of ignition, ventilate area and remove with inert absorbent and non-sparking tools. Contain spilled liquid with sand or earth. DO NOT use combustible materials such as sawdust.
Handling: Use only in a well-ventilated area. Avoid breathing vapor or mist. Wash thoroughly after handling. Wash hands before eating. Follow all MSDS/label precautions even after container is emptied because it may retain product residues.
Storage: Do not store above 120 ° F. Store large quantities in buildings designed and protected for storage of NFPA Class I flammable liquids. Contents under pressure. Do not expose to heat or store above 120 ° F. Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame.
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Use explosion-proof ventilation equipment. Prevent build -up of vapors by opening all doors and windows to achieve cross-ventilation.
Respiratory Protection: A NIOSH/MSHA approved air purifying respirator with an organic vapor cartridge or canister may be permissible under certain circumstances where airborne concentrations are expected to exceed exposure limits. Protection provided by air purifying respirators is limited. Use a positive pressure air supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known, or any other circumstances where air purifying respirators may not provide adequate protection. A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator's use.
Skin Protection: Nitrile or Neoprene gloves may afford adequate skin protection. Use impervious gloves to prevent skin contact and absorption of this material through the skin.
Eye Protection: Use safety eyewear designed to protect against splash of liquids.
Other protective equipment: Refer to safety supervisor or industrial hygienist for further information regarding personal protective equipment and its application.
Hygienic Practices: Wash thoroughly with soap and water before eating, drinking or smoking.
(See section 16 for abbreviation legend)
Conditions To Avoid: Avoid all possible sources of ignition. Avoid temperatures above 120 ° F.
Incompatibility: Incompatible with strong oxidizing agents, strong acids and strong alkalies.
Hazardous Decomposition: When heated to decomposition it emits acrid smoke and irritating fumes. By open flame, carbon monoxide and carbon dioxide.
Hazardous Polymerization: Will not occur under normal conditions.
Stability: This product is stable under normal storage conditions.
Section 8 - Exposure Controls / Personal Protection
Section 9 - Physical And Chemical Properties Boiling Range: 150 - 380 F Vapor Density: Heavier than Air Odor: SOLVENT Odor Threshold: ND Appearance: LIQUID Evaporation Rate: Faster than Ether Solubility in H2O: SLIGHT Freeze Point: ND Specific Gravity: 0.440 Vapor Pressure: ND PH: ND Physical State: LIQUID
Section 10 - Stability And Reactivity
Page 3 of 6
Ecological Information: Product is a mixture of listed components.
Disposal Information: Dispose of material in accordance to local, state and federal regulations and ordinances. Do not allow to enter storm drains or sewer systems.
CERCLA - SARA Hazard Category
This product has been reviewed according to the EPA "Hazard Categories" promulgated under Sections 311and 312 of the Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to meet the following categories:
IMMEDIATE HEALTH HAZARD, CHRONIC HEALTH HAZARD, FIRE HAZARD
SARA Section 313:
Listed below are the substances (if any) contained in this product that are subject to the reporting requirements of Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372:
Chemical Name CAS NumberHexane 110-54-3Toluene 108-88-3Aromatic Petroleum Distillates 64742-94-5
Page 4 of 6
Listed below are the substances (if any) contained in this product that are subject to the reporting requirements of TSCA 12(B) if exported from the United States:
U.S. State Regulations: As follows -
New Jersey Right-to-Know:
The following materials are non-hazardous, but are among the top five components in this product.
None
Pennsylvania Right-to-Know:
The following non-hazardous ingredients are present in the product at greater than 3%.
None
California Proposition 65:
Warning: The following ingredients present in the product are known to the state of California to cause Cancer:
Warning: The following ingredients present in the product are known to the state of California to cause birth defects, or other reproductive hazards.
International Regulations: As follows -
CANADIAN WHMIS:
This MSDS has been prepared in compliance with Controlled Product Regulations except for the use of the 16 headings.
CANADIAN WHMIS CLASS: AB5 D2A D2B
VOLATILE ORGANIC COMPOUNDS, g/l: 395
REASON FOR REVISION: Regulatory Update
Legend: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined
Chemical Name CAS NumberNaphthalene 91-20-3Benzene 71-43-2
Chemical Name CAS NumberToluene 108-88-3Benzene 71-43-2
Section 16 - Other Information
HMIS Ratings: Health: 2 Flammability: 4 Reactivity: 0 Personal Protection: X
Page 5 of 6
The information contained on this MSDS has been checked and should be accurate. However, it is the responsibility of the user to comply with all Federal, State, and Local laws and regulations.
Page 6 of 6
900 CLEAR COAT : X-I-M PRODUCTS, INC. http://www.msdss.com/pdf/001788.htm
1 of 6 10/7/2005 9:13 PM
First Aid Measures Fire Fighting Measures Manufacturer/Responsible Party Personal Protection Physical-Chemical Properites Accidental Release Measures Handling/Storage Chemical Ingredients HAZCOM Label
Product Identification
Product ID: 900 CLEAR COAT MSDS Date: 01/01/1985 Tech Review: 05/16/1984 FSC: 8010 NIIN: LIIN: 00F000274 MSDS Number: 001788 Submitter: F BT Status Cd: C MFN: 01 Article: N Kit Part: N
Manufacturer-Responsible Party
Company Name: X-I-M PRODUCTS, INC. Address: Box: City: N/P State: NK ZIP: 00000 Country: NK Info Phone Num: Emergency Phone Num: 216/871-4737 Resp. Party Other MSDS Num.: Preparer's Name: N/P Chemtrec Ind/Phone: Proprietary Ind: N Review Ind: Y Published: Y CAGE: XIMPR Special Project Cd: N
LD50 LC50 Mixture : N/P Route of Entry Inds - Inhalation: N/P Skin: N/P Ingestion: N/P Carcinogenicity Inds - NTP: N/P IARC: N/P OSHA: N/P Health Hazards Acute and Chronic N/P Explanation of Carcinogenicity N/P Signs and Symptions of Overexposure MAY CAUSE DIZZINESS OR IN EXTREME CASE, ABSENCE OF OXYGEN COULD PRODUCE
900 CLEAR COAT : X-I-M PRODUCTS, INC. http://www.msdss.com/pdf/001788.htm
3 of 6 10/7/2005 9:13 PM
NARCOSIS. Medical Cond Aggravated by Exposure N/P
First Aid Measures
First Aid IF UNCONSCIOUS, REMOVE PERSON TO FRESH AIR AND CALL A PHYSICIAN. IF SPRAYED INEYES, FLUSH IMMEDIATELY WITH LARGE QUANTITIES OF WATER.
Accidental Release Measures
Spill Release Procedures FLUSH WITH LARGE QUANTITIES OF WATER. VENTILATE AREA. Neutralizing Agent N/P
Disposal Considerations
Waste Disposal Methods DO NOT PUNCTURE OR INCINERATE CONTAINERS. GIVE TO A DISPOSAL SERVICE EQUIPPEDTO SAFELY HANDLE AND DISPOSE OF PRESSURIZED CONTAINERS.
Handling and Storage
Handling and Storage Precautions READ AND FOLLOW CAUTIONS ON PRODUCT LABEL. DO NOT STORE IN TEMPERATURESABOVE 120F. Other Precautions N/P
Fire Fighting Measures
Flash Point Method: N/P Flash Point: Flash Point Text: <20F T.O.C. Autoignition Temp: Autoignition Temp Text: N/A Lower Limits: Upper Limits: Extinguishing Media WATERFOG, FOAM CO2 OR DRY CHEMICAL Fire Fighting Procedures KEEP CONTAINERS COOL;USE EQPMNT TO PROTECT AGNST BURSTING Unusual Fire/Explosion Hazard AT ELEVATED TEMPERATURES (130 OR OVER) CONTAINERS MAY VENT, RUPTURE, ORBURST.
900 CLEAR COAT : X-I-M PRODUCTS, INC. http://www.msdss.com/pdf/001788.htm
4 of 6 10/7/2005 9:13 PM
Personal Protection
Respiratory Protection AVOID BREATHING CONCENTRATED VAPORS OR PARTICLES. Ventilation LOCAL EXHAUST-NORMAL USE - NORMAL VENTILATION Protective Gloves N/P Eye Protection N/P Other Protective Equipment N/P Work Hygienic Practices N/P Supplemental Safety and Health 1169 BASSETT ROAD/ WESTLAKE, OHIO 44145.
Stability Indicator/Materials to Avoid: YES N/P Stability Condition to Avoid: PRESSURIZED CONTAINERS COULD RUPTURE ABOVE 130F. Hazardous Decomposition Products: PHOSGENE, CARBON MONOXIDE AND RELATED ACIDS. Hazardous Polymerization Indicator: NO Conditions to Avoid Polymerization: N/P
Toxicological Information
900 CLEAR COAT : X-I-M PRODUCTS, INC. http://www.msdss.com/pdf/001788.htm
5 of 6 10/7/2005 9:13 PM
Toxicological Information: N/P
Ecological Information
Ecological: N/P
MSDS Transport Information
Transport Information: N/P
Regulatory Information
SARA Title III Information: N/P Federal Regulatory Information: N/P State Regulatory Information: N/P
Other Information
Other Information: N/P
HAZCOM Label
Product ID: 900 CLEAR COAT CAGE: XIMPR Assigned Ind: N Company Name: X-I-M PRODUCTS, INC Street: 1169 BASSETT ROAD PO Box: City: WESTLAKE State: OH ZIP: 44145 Country: US Health Emergency Phone: 216/871-4737 Label Required Ind: Y Date of Label Review: 12/16/1998 Status Cd: C Mfg Label Num: Label Date: 12/16/1998 Year Procured: N/K Origination Cd: G Chronic Hazard Ind: N/P Eye Protection Ind: N/P Skin Protection Ind: N/P Signal Word: N/P Respiratory Protection Ind: N/P Health Hazard: Contact Hazard: Fire Hazard:
900 CLEAR COAT : X-I-M PRODUCTS, INC. http://www.msdss.com/pdf/001788.htm
6 of 6 10/7/2005 9:13 PM
Reactivity Hazard: Hazard And Precautions MAY CAUSE DIZZINESS OR IN EXTREME CASE, ABSENCE OF OXYGENCOULD PRODUCE NARCOSIS.
Material Data Safety Sheet
NOTICE All information appearing herein is based upon data obtained from the manufacturer and/or recognized technical sources. This information is
believed to be correct, but does not purport to be all-inclusive and shall be used only as a guide. MJG Technologies makes no warranty, express or implied, as to the accuracy or completeness of this information. It is the user's responsibility to determine the suitability of this
information for the adoption of necessary safety precautions and/or compliance with local, state, and federal laws and regulations.
Section 1. - General Information Identity: (As used on label and list) Trade Name: M-Tek UN0454 Igniters 1.4s Emergency Telephone: 1-800-255-3924 Manufacture's Name & Address: Telephone Number: 856-228-6118 MJG Technologies Inc. Date Prepared: January 14, 2003 832 Camden Avenue Prepared By: J. Genze1 Blenheim, NJ 08012
Section 2. - Hazardous Ingredients / Identity Information Per OSHA 29 CPR 1910.1200 Exposure Limits OSHA ACGIH Chemical Name CAS# (PEL) (TLV) Other Limits % Lead Thiocyanate 582-87-0 TWA .05mg(Pb)/m3 .15mg(Pb)/m3 TWA .l0mg(Pb)fm3 NIOSH TWA Lead Oxide (Tetra) 1314-41-5 TWA .02mg(Pb)/m3 .l0mg(Pb)/m3 NIOSH TWA Potassium Chlorate 3811-04-09 ori rat LDLo: 7.000mg/kg Potassium Per chlorate 7778-74-7 ori rat LDLo: 2.100mg/kg
Section 3. - Physical Chemical Characteristics Boiling Point (deg. F.) N/A Specific Gravity (H2O = 1) N/A Vapor Pressure (mm Hg.) N/A Melting Point N/A Vapor Density (Air = 1) N/A Evaporation Rate (Butyl Acetate = 1) N/A Solubility in Water: Insoluble with lacquer coating intact. Appearance and Odor: Medium brown colored bead of pyrotechnic composition on a copper-clad chip with two PVC insulated connecting wires of various lengths.
Section 4. – Fire and Explosion Hazard Data
Flash Point: N/A Flammable Limits LEL UEL N/A N/A N/A Extinguishing Media: N/A Special Fire Fighting Procedures: Do not use suffocating methods - devices contain their own oxygen.
If conditions permit, separate burning from unburned electric matches. Unusual Fire and Explosion Hazards: Burning electric matches will project sparks several feet and can cause secondary fires.
Electric matches may rupture a container if ignited under confinement. Electric matches may be ignited by extreme impact or friction.
Section 5. - Reactivity Data
Stability: Stable Conditions to Avoid: Sources of ignition - heat, sparks, open flames and smoking. Do not subject
match heads to impact or friction. Incompatibility (Materials to Avoid): Acids and reducing agents. Hazardous Decomposition Byproducts: Smoke contains oxides of Boron, Nitrogen and Lead -lead dust. Hazardous Polymerization: Will not occur.
Section 6. - Health Hazard Data Route(s) of Entry: Inhalation? Skin? Ingestion?
Not with match head intact No Not with match head intact. Health Hazards (Acute and Chronic): Primary hazard is from thermal burns caused by accidental ignition of match heads.
Deliberate inhalation or ingestion of large amounts of crushed match head composition may cause lead poisoning. Not absorbed through skin.
No No No Signs and Symptoms of Exposure: Acute lead intake: Lead is a cumulative neurotoxin. Poisoning affects the central nervous system,
gastrointestinal tract, blood and kidneys. Inhalation or ingestion of large amounts may cause thirst, metallic taste, burning sensation, vomiting or diarrhea. Early stages of lead poisoning may be evidenced by anorexia. weight loss, apathy or limitability.
Medical Conditions Generally Aggravated By Exposure: Smoke generated by ignited matches may cause respiratory irritation in those
individuals with asthma, allergies or other preexisting respiratory conditions. Emergency First Aid Procedures: Move patient to source of fresh air. Do not induce vomiting. Get prompt medical attention from
qualified medical personnel.
Section 7. - Precautions For Safe Handling And Use
Steps to be Taken in Case Material is Released or Spilled: Immediately remove sources of ignition and isolate spill from any other
flammable or pyrotechnic materials. Sweep up any crushed match heads using non-sparking tools. Avoid inhaling match head dust.
Waste Disposal Method: Dispose of in accordance with local, state and federal regulations. Small quantities can be disposed of by open burning if permitted.
Precautions to be Taken in Handling and Storage: Keep away from sources of heat and ignition, such as sparks or open flames. Avoid impact or friction to match head. Store igniter containers in a cool place. Do not store igniters with flammable, explosive or other pyrotechnic compositions. Keep out of the reach of children and uniformed persons.
Other Precautions: Avoid sources of strong electromagnetic fields and static electricity.
Section 8. - Control Measures Respiratory Protection (Specify Type): Nuisance dust/particulate filter mask if large numbers of matches are ignited in a confined area Ventilation: Yes. Local Exhaust: Acceptable. Mechanical (General): Special: Protective Gloves: Not normally Required. Other: Eye Protection: Goggles or sagely glasses with side shields. Other Protective Clothing or Equipment: Long Sleeve cotton garments advised if handling a large quantity of electric matches. Work I Hygienic Practices: Wash thoroughly after handling electric matches and before eating, drinking or smoking.
Hodgdon Powder Co., Inc.6231 RobinsonShawnee Mission, Ks. 66202, USAEmergency Telephone: Chem-tel 800-255-3924Telephone Number for Information: 913-362-9455Date Prepared: 10/31/2005
Section II. HAZARDOUS INGREDIENTS/IDENTITYINFORMATION
Hazardous Components (Chemical Identity: Common Name(s) CAS# OSHA PELACGIH TLV Other Limits %(optional)Charcoal NA NA NA NASulfur 7704349 NA NA NAPotassium Nitrate 7757791 NA NA NAPotassium Perchlorate 7778747 NA NA NAGraphite 7782425 NA 2.5 mg/m3 Respirable DustOther: Other ingredients are trade secrets, but can bedisclosed per 29 CFR 1910.1200(i)
Section III. PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point Not Applicable SpecificGravity (H2O =1): Bulk density is 0.75 (g/cc)Vapor Pressure (mm HG): Not Applicable MeltingPoint: Not ApplicableVapor Density (AIR = 1) Not Applicable EvaporationRate: Not ApplicableSolubility in Water: Partially (ButylAcetate = 1)Appearance and Odor: Medium to dark pray granularsolid. Slight odor when ignited.
Store
Check out the Funnel Cap in our secure online store.
Auto-ignition Temperature: 740 (F) (Pellets: 500[f]) Flammable Limits: N/A LEL: N/A UEL: N/AExtinguishing Media: For unattended fire prevention, watercan be used to disburse burning Pyrodex. Pyrodex has itsown oxygen supply, so flame smothering techniques areineffective. Water may be used on unburnt Pyrodex toretard further spread of fire.Special Fire Fighting Procedures: Pyrodex is extremelyflammable and may deflagrate. Get away and evacuatethe area.Unusual Fire and Explosion Hazards: As with anypyrotechnic, if under confinement or piled in moderatequantities, Pyrodex can explode violently, toxic fumessuch as sulfur dioxide are emitted while burning.
Section V. REACTIVITY DATA
Stability Unstable: Conditions toAvoid: Avoid storage at temperatures above 150[F], Stable: X impact, hot embers,sparks and static discharges.
Incompatibility (Materials to Avoid) Metal powders andacidsHazardous Decomposition or Byproducts: CO, CO2,SO2, non-metallic oxides, and suspended particulate matter from burning.Hazardous May Occur: Conditionsto Avoid: Not known to occur.Polymerization: Will Not Occur: X
Section VI. HEALTH HAZARD DATA
Route(s) of Entry: Inhalation?: Yes Skin?: Yes Ingestion?: Yes
Health Hazards (acute and Chronic): TLV unknown foringestion of dust, Acute oral LD50 in rats is calculated tobe 4.0 [g/kg body weight].Carcinogenicity: No NTP? No IARC? No OSHA regulated?: NoSigns and Symptoms of Exposure: Burning or itchingof the eye, nose, or skin; shortness of breath.Medical Conditions Generally Aggravated by Exposure: Some people may be unusually sensitive to the product.Emergency and First Aid Procedures: Remove patientfrom exposure, and if skin contact, wash affected areawith copious amounts of water.
Section VII. PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to Be Taken in Case Material is Released of Spilled: Do not smoke in the area. Powder should be scooped or swept up using non-sparking, conductive tools. Thisshould be done in a manner so that no dusting occurs.Waste Disposal Method: Wet thoroughly with water todissolve the powder. Comply with all federal, state, andlocal laws.
Pyrodex is a solid propellant which is designed to propell a mass. Thus appropriate care should be taken to avoidheavy confinement and ignition sources such as, but notlimited to, heat, static discharge, embers, friction, andimpact. Do not drop containers of powder. Store at temperatures of less than 150[F] in approved magazines.
Other Precautions: In the area of use, avoid all possiblesources of ignition and use explosion proof electrical equipment suitable for use with explosive dusts.
Regulatory Information:Pyrodex is Extremely Flammable. Pyrodex is not anexplosive regulated by Federal Explosive Law, but mayexplode if misused. Pyrodex is not smokeless powder, butis approved to ship (DOT) and store (NFPA) as such.Pyrodex is not allowed on passenger aircraft, but may beloaded into ammunition which may be allowed. It may beshipped as a flammable solid by road, rail, vessel, or cargoonly aircraft, or as an explosive by road, rail or vessel.While Pyrodex contains no nitrocellulose, the flammablesolid proper shipping name is "Smokeless powder for smallarms". DOT classifications follow:Flammable Solid (see 49 CFR 173.171): Smokelesspowder for small arms, 4.1, NA3178, PG IExplosive: Propellant, solid, 1.3C, UN0499, PG II
Section VIII. CONTROL MEASURES
Respiratory Protection (Specify Type): DisposableNIOSH approved dust masks may be used if desired.Ventilation Local Exhaust: if used, should be equippedwith well maintained, continuously active water washingsystem.Mechanical (General): Use NEMA Class II, Division 1,Groups F&G motors or better.Protective Gloves: May use if sensitivity of skin occurs.Wash daily. Eye Protection: Use goggles if sensitivityoccurs.Other Protective Clothing or Equipment: "100%" cottonclothing and grounded work station are recommended tominimize static electricity discharge.Work/Hygienic Practices: Work with small quantities,keeping main supply in closed container. Shower after exposure, and wash clothing daily.
Please read container warning, and call 913-362-9455 formore information
The Fine Print
Proud Member
Proud Member - Join Today
Protect Your Freedom
Join the NRAToday!
Before emailing - be aware that you may not get ananswer. While we try very hard to reply in a timely manner,it is possible that your emails are being blocked by our
spam filters or, more likely, a response from us is beingblocked as it comes back to you. Some ISP’s have childprotection or spam blocking in place that will not let usreply. A very significant percentage of workplace andgovernment email servers will block a reply from us. If youdo not get a timely reply, figure we are not able tocommunicate by email and call us, 913-362-9455
If you have a safety problem or concern - DO NOT EMAIL - CALL US DIRECTLY - 913-362-9455
If you require an immediate reply - CALL US -913-362-9455
