Date post: | 05-Jan-2016 |
Category: |
Documents |
Upload: | olivia-sanders |
View: | 216 times |
Download: | 0 times |
Material Technology
TALONS PRODUCTION TECHNIQUESARE SOPHISTICATED AND REQUIRE ADVANCED TECHNOLOGICAL PROCESSING
TALONS Billet Manufacturing facility
TALBORIS LIGHTER THAN ALUMINUM, STEEL AND TITANIUMTalbor 15%Talbor
Chart1
2.68
2.79
4.45
7.83
(g/cm3)
Density
Sheet1
Boralyn H152.68
Aluminum 70752.79
Titanium 3/2.54.45
Steel 17-47.83
Sheet1
0
0
0
0
(g/cm3)
Density
Sheet2
Sheet3
POUND-FOR-POUND,TALBORCAN BE FORMULATED TO BESTRONGER THAN MOSTALUMINUM, STEEL AND TITANIUMTalbor
Chart1
1020
459
766
533
(103 in.)
Specific Strength
Sheet1
Boralyn E151020
Aluminum 6061459
Titanium 3/2.5766
Steel 17-4533
Sheet1
0
0
0
0
(103 in.)
Specific Strength
Sheet2
Sheet3
Metal Matrix Applications
Metal Matrix Composite applicationsTransportation Automotive Aerospace/Military
Current Projects:Engine Cradles Electronic Racks SatellitesAutomotive Pumps Skid Rails Pistols Brake Disks Circuit Boards Jet ComponentsCylinder Liners
AUTOMOTIVE INDUSTRYAPPLICATIONS IN ENGINESBLOCKSHEADSPISTONSCONNECTING RODSVALVE GUIDESPUMPSBMW - WilliamsFerrariIlmor Engineering
A Nuclear Shielding Material For the 21st CenturyTalbor MMC Composite
Microstructure of Boral and Talbor/BoralynBoth original micrographs at 200X
MMC Homogeneity
ADVANTAGES of Talons MMCUniform Fine MicrostructureUniform Shielding-No Channeling High DuctilityFracture ResistanceFormabilityStructural Property Capability6092 and 7093 Matrix Alloy Available55 ksi and 90 ksi yield strength
Neutron Attenuation
Nuclear Traceable Verification
Established Quality Assurance ProgramISO-9002 Compliant
Neutron Shielding History* Our metal matrix material was shipped to Framatome in the early 90's.(6092 alloy + 25,30% B4C) 200 lbs. * The material was used commercially for a 9 cask job for Transnuclear, USA ( 120,000. lbs) 1100 + 15% B4C * The material 1100/15%B4C was shipped to Hitachi Zosen for commercial use. (1100 series AL + 15% B4C) * The NRC issued a certificate of conformance on our material in 1998. (TN-68 cask) * Our material was commercially used by NAC United States for use in China. ( 48,000 lbs. of material, 1100 + 29.2% B4C) * The NRC issued another Certificate of conformance on our TALBOR product. * BNFL and Talon Composites have signed three contracts involving the shipment and storage of nuclear fuel. (45,000. lbs of Al + B4C)
Hitachi Japan- Transnuclear US - 1997-1999
NAC CHINA Casks 1999-2006
BNFL 2001- 2006
Research & Development
Instron Tensile and X-ray testing on MMC Composites
**********************