vol. 17, No. 12, Page 3 CURING AGENTS FDR EPOXY RESIN SYSTEMS This describes new developments and reviews epoxy coatings from the curing agent point of view. Poly. Paint Col. J., 1987, (Suppl. to Sept. 301, 145 EFFECT DF CRYSTALLINITY AND FLEXIBILTY ON THE PHDTDDEGRADATIDN OF PDLYURETHANES Using fluorescence spectroscopy and gel content measurement, the University of Southern Mississipi has shown that the photolysis of simple polyurethanes based on methylene 4,4'- diphenyldiisocyanate (MD11 depends on both the flexibility and crystallini ty of the polymer. Polyurethane films based on MD1 and 1,12-dodecane-diol (MDI-12) can be either annealed or quenched to yield a semicrystalline (as measured by DSC and X- ray diffraction) or amorphous film, respectively. Apparently, for aromatic diisocyanate-based polyurethanes, the extent and mechanism of degradation is directly dependent on the crystallinity and main-chain flexibility of the polymer. J. Poly. Sci., Part A, Poly. Chem., 1987, 25 2631-2642 -' MATERIALS END USE FIRE RETARDANT FILLER TRADE NAME(S) FRXP 150, 154, 130, 140 CHEMICAL TYPE CDUPANY Non-halogenated inorganic 3. M. Huber PRODUCT DETAILS Grade 150 is for polypropylene and nylons. High loadings of this filler provide UL94V-0 ratings. Grade 154 is surface- modified and is for use in polyester systems. Grade 130 is a coarse grade of 150, and 140 is an intermediate grade. END USE TRADE NAME(S) CHEMICAL TYPE CDMPANY FIRE RETARDANT CONCENTRATE A 25656 Unspecified Polycom Huntsman Inc. PRODUCT DETAILS For polythene blown or cast film, injection moulded components, profile extrusions, etc. Meets fire retardant requirements in construction film. Cont./...... Q 1987Elsevier Science Publishers B.V., Amsterdam./tW$O.OO + 2.20 ADDITIVES FOR No part of this publication may be reproduced. stored in a retrieval system. or transmitted by any form or by any POLYMERS means, electronic, mechanical, photocopying, recording or otherwise. without the prior permission of the publishers. (Readers in the U.S.A. - please see special regulations listed on back cover.)
Transcript
vol. 17, No. 12, Page 3
CURING AGENTS FDR EPOXY RESIN SYSTEMS
This describes new developments and reviews epoxy coatings from the curing agent point of view.
Poly. Paint Col. J., 1987, (Suppl. to Sept. 301, 145
EFFECT DF CRYSTALLINITY AND FLEXIBILTY ON THE PHDTDDEGRADATIDN OF PDLYURETHANES
Using fluorescence spectroscopy and gel content measurement, the University of Southern Mississipi has shown that the photolysis of simple polyurethanes based on methylene 4,4'- diphenyldiisocyanate (MD11 depends on both the flexibility and crystallini ty of the polymer. Polyurethane films based on MD1 and 1,12-dodecane-diol (MDI-12) can be either annealed or quenched to yield a semicrystalline (as measured by DSC and X- ray diffraction) or amorphous film, respectively. Apparently, for aromatic diisocyanate-based polyurethanes, the extent and mechanism of degradation is directly dependent on the crystallinity and main-chain flexibility of the polymer.
J. Poly. Sci., Part A, Poly. Chem., 1987, 25 2631-2642 -'
MATERIALS
END USE FIRE RETARDANT FILLER TRADE NAME(S) FRXP 150, 154, 130, 140 CHEMICAL TYPE CDUPANY
Non-halogenated inorganic 3. M. Huber
PRODUCT DETAILS Grade 150 is for polypropylene and nylons. High loadings of this filler provide UL94V-0 ratings. Grade 154 is surface- modified and is for use in polyester systems. Grade 130 is a coarse grade of 150, and 140 is an intermediate grade.
END USE TRADE NAME(S) CHEMICAL TYPE CDMPANY
FIRE RETARDANT CONCENTRATE A 25656 Unspecified Polycom Huntsman Inc.
PRODUCT DETAILS For polythene blown or cast film, injection moulded components, profile extrusions, etc. Meets fire retardant requirements in construction film.
ADDITIVES FOR No part of this publication may be reproduced. stored in a retrieval system. or transmitted by any form or by any
POLYMERS means, electronic, mechanical, photocopying, recording or otherwise. without the prior permission of the publishers. (Readers in the U.S.A. - please see special regulations listed on back cover.)
Vol. 17, No. 12, Page 4
END USE FIRE RETARDANT TRADE NAME(S) DP-45 CHEMICAL TYPE Unspecified COMPANY Great Lakes Chemical Corp.
PRODUCT DETAILS Efficient fire retardant for use in PVC, elastomers, adhesives and coatings. Possesses excellent heat stability, and has low viscosity. Samples and semi-commercial quantities now available.
END USE TRADE NAME(S) CHEMICAL TYPE CDUPANY
FIRE RETARDANT FOR POLYURETHANES FR-513 Tribromoneopentyl alcohol AmeriBrom Inc.
PRODUCT DETAILS High solubility characteristics and good heat, UV and hydrolytic stability. Contains 72-73% aliphatic bromine and is said to be a highly efficient fire retardant.
END USE TRADE NAME(S) CHEMICAL TYPE COMPANY
FIRE RETARDANT Exolit 422, 462, 455 Phosphates Hoechst Celanese
PRODUCT DETAILS Developmental grades.
422 contains 31.5% phosphorus and is for use in PU foams, thermoplastics, elastomers and thermosets. 462 is a melamine formaldehyde encapsulated ammonium polyphosphate with 29% phosphorus, and recommended for water-sensitive applications. 455 is an epoxy encapsulated ammonium polyphosphate with 30% phosphorus content, and is also for water-sensitive applications.
END USE TRADE NAUE(S) CHEMICAL TYPE CDHPANY
UV ABSORBERS UV 149 and UV 349 Based on HALS/phenolic/phosphite M.A. Polymers (U.S.1
PRDDUCT DETAILS Two new concentrates. 149 is primarily for polythene. 349 has a higher percentage of phosphite for thermoplastic polyester applications.
Cont./......
o 1987 Elsevier Science Publishers B.V., Amsterdam./tW$O.OO + 2.20
ADDITIVES FOR No part ofthis publication may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording or otherwise. without the prior permission of the publishers.
POLYMERS [Readers in the U.S.A.-please see special regulations listed on back cover.1
Vol. 17, No. 12, Page 5
END USE UV ABSORBERS TRADE NAME(S) CGR-X166 and 169 CHEMICAL TYPE HALS CWPANY Ciba-Geigy Corp.
PRODUCT DETAILS Experimental grades designed for use in products that will undergo gamma-radiation sterilisation. Improve the colour retention in polypropylene after such treatment.
END USE TRADE NAME(S) CHEUICAL TYPE CWPANY
UV ABSORBERS Sun Shade 20-74 and 20-75 Zinc oxides Santech Inc.
PRODUCT DETAILS Synergists for use in PVC. Act as light and heat stabilizers in rigid and semi-flexible products. Both can be used with pigmented or non-pigmented compounds.
END USE TRADE NAME(S) CHEMICAL TYPE COMPANY
ANTIOXIDANT Naugard 529 Hindered phenol Uniroyal Chemical Co.
PRODUCT DETAILS FDA-approved, low-cost antioxidant for a number of polymer systems. Is a clear, viscous liquid. Can be used in combination with a phosphite co-stabilizer.
END USE TRADE NAME(S) CHEMICAL TYPE COMPANY
ANTIOXIDANTS Mark 5089 and 5095 Thioester synergists Argus Chemical
PRODUCT DETAILS 5089 is a beta thioproprionate and 5095 is a thioproprionate with FDA approval for pharmaceutical and cosmetic applications.
END USE TRADE NAME(S) CHEMICAL TYPE CDMPANY
HEAT STABILIZER FOR PVC Interstab BC-4559 Barium/cadmium Interstab
PRODUCT DETAILS Is for pigmented or filled calendered stock. Low volatility, and low temperature stability. Low plate-out and good colour stability. Can also be used in extrusions.
Cont./......
e 1987 FJsevier Science Publishers B.V.. Amsterdam.R7/$0.00 + 2.20
ADDITIVES FOR No part of this publication may be reproduced, stored in a retrieval system, or transmitted by any form or by any
POLYMERS means, electronic. mechanical, photocopying, recording or otherwise, without the prior permission of the publishers. (Readers in the U.S.A. - please see special regulations listed on back cover.)
~01. 17, No. 12, Page 6
END USE TRADE NAME(S)
CHEMICAL TYPE
CDMPANY
HEAT STABILIZERS FOR PVC 1) Mark 7186 2) Mark 7287 1) Barium/cadmium 2) Barium/cadmium/zinc Argus Chemical
PRODUCT DETAILS 7186 is for clear, flexible calendered stock. Uses include shower curtains and flooring overlays. 7287 is formulated for low-fogging automotive applications.
END USE HEAT STABILIZER FOR PVC TRADE NAME(S) Interstab BC-4746 and BC-4692 CHEMICAL TYPE Barium/cadmium COMPANY Interstab
PRODUCT DETAILS Developed mainly for calendered stock, BC-4746 can also be used in filled and pigmented systems. Recommended for applications such as rear windows for convertible automobiles and pool liners. BC-4692 is for blown film, but can also be used in plastisols, calendering, and fluidized bed coating.
END USE TRADE IAWE CHEMICAL TYPE CDMPANY
HEAT STABILIZERS FOR PVC Mark 7188 and 7187 Barium/cadmium Argus Chemical
PRDDUCT DETAILS High efficiency systems with low plate-out characteristics, and long-term stability.
END USE TRADE NAME(S) CHEUICAL TYPE CDMPANY
PRDDUCT DETAILS
HEAT STABILIZERS FOR PVC Synpron 1810, 1812, and 1678 Barium-cadmium Synthetic Products
Contain no diluents. Intended for general-purpose calendering. 1678 has good weathering properties.
PRODUCT DETAILS FDA approval for blown film food applications. Grades differ in lubricating properties: 716 is least lubricating, 789 is most lubricating, and 720 is intermediate.
Cont./......
o 1987 Elaavier Science Publishers B.V., Amsterdam.18760.00 + 2.20
ADDITIVES FOR No part of this publication may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the publishers
POLYMERS (Readers in the U.S.A.-please see special regulations listed on back cover.)
Vol. 17, No. 12, Page 7
END USE HEAT STABILIZER FOR PVC TRADE NAME(S) Interstab BC-4619 CHEMICAL TYPE Barium/calcium/zinc/phosphite system COMPANY Interstab
PRODUCT DETAILS For extruded or calendered filled systems. Excellent UV and heat stability. Low odour.
END USE TRADE NAME(S) CHEMICAL TYPE CDHPANY
HEAT STABILIZER FOR PVC Synpron 1566 Powdered calcium/zinc Synthetic Products
PRDDUCT DETAILS Said to provide better clarity than most powdered calcium zincs.
END USE TRADE NAME(S) CHEMICAL TYPE COMPANY
HEAT STABILIZER FOR PVC Mark 3090 Liquid calcium/zinc Argus Chemical
PRODUCT DETAILS For FDA-type, clear, flexible packaging film. Better clarity than Mark 3023 previously offered by Argus. Is now under evaluation by users.
END USE TRADE NAME(S) CHEMICAL TYPE CDHPANY
HEAT STABILIZERS FOR PVC Stabiol VCA 1732 and VZN 1733 Two-component calcium/zinc system Henkel Corp.
PRODUCT DETAILS A two-component system for food-grade rigid PVC. 1732 is a modified calcium stearate and 1733 is a modified zinc soap. Used in combination with each other, they provide improved early colour.
ADDITIVES FOR No part of this publication may be reproduced. stored in a retrieval system, or transmitted by any form or by any
POLYMERS means, electronic. mechanical, photocopying, recording or otherwise. without the prior permission of the publishers. (Readers in the U.S.A. - please see special regulations listed on back cover.1
Vol. 17, No. 12, Page 8
END USE TRADE NAUE(S) CHEMICAL TYPE CDMPANY
ANTIOXIDANT FOR PU FOAMS Lowinox VB063 Liquid synergistic mixture of various antioxidants Chemische Werke Lowi
PRODUCT DETAILS Developed for use in PU foams but is also suitable for thermoplastic polyurethanes. Inhibits the discolouration caused by oxidation during PU foam production.
PRDDUCT DETAILS LT-4623 is a lubricating compound for all types of extruded gaskets. LT-4639 is intended for automotive sealants, undercoat and sound-deadening plastisols. Long-term stability at 40% lower use levels than standard compounds.
END USE TRADE NAME(S) CHEMICAL TYPE CDHPANY
HEAT STABILIZER FOR PVC Mark 4063 Calcium/zinc liquid Argus Chemical
PRODUCT DETAILS Is for use in fluidized bed coating compounds. Allows high- quality finish to be obtained comparable with the normally-used tin stabilizers.
END USE TRADE NwE(S) CHEMICAL TYPE CDHPANY
HEAT STABILIZER FOR PVC Mark 4064 Non-cadmium liquid Argus Chemical
PRODUCT DETAILS Low toxicity compound with higher efficiency than most barium/zincs. Excellent clarity. For non-FDA applications.
ADDITIVES FOR No part of this publication may be reproduced. stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the publishers
POLYMERS (Readers in the U.S.A. - please see special regulations listed on back cover.)
Vol. 17, No, 12, Page 9
END USE TRADE NAME(S) THRICE TYPE CDBPANY
PRDDUCT DETAILS
END USE TRADE NAME(S1 ~~~I~AL TYPE CDMPANY
PRDDUCT DETAILS
END USE TRADE NAME(S) CHEMICAL TYPE CDUPANY
PROUST DETAILS
END USE TRADE NAME(S) CHEWCAL TYPE CDMPANY
PRDDUCT DETAILS
END USE TRADE NAME(S) CHEMICAL TYPE
ANY
PRDDUCT DETAILS
HEAT STABILIZER FOR ANTISTATIC PVC Mark 7163 Barium/cadmium/zinc Argus Chemical
For use in conjunction with Markstat AI.15, 26, 44, and 48 antistatic agents in flexible compounds. The efficiency of antistatic agents is related to the stabilizer requirement.
HEAT STABILIZER FOR PVC Tribase XLS lead Anzon Inc.
For rigid calendered stock. Supplied in a dustless, stranded form, Said to protect the PVC in the early stages of the high intensity blending cycle until the primary lead stabilizer is dispersed.
HEAT STA3ILIZERS FOR PVC Stanclere T-4624 and T-4625 Estertins Interstab
For white coloured profiles and pipes. Provide similar light stability to other conventional stabilizer systems at a much lower cost.
ADDITIVES FOR No part of this publication may be reproduced. stored in a retrieval system, or transmitted by any form or by any
POLYMERS means. electronic. mechanical, photocopying, recording or otherwise, without the prior permission of the publishers. (Readers in the U.S.A. - please see special regulations listed on back cover.)
Vol. 17, No. 12, Page 10
END USE TRADE NAME(S) CHEMICAL TYPE CDMPANY
HEAT STABILIZERS FOR PVC Stanclere T-4645 and T-4655 Estertins Interstab
PRDDUCT DETAILS For injection mouldings. Formulated for optimum impact strength, heat distortion, and thermal stability. 4645 has lower metal content than 4655.
END USE HEAT STABILIZER F@R PVC TRADE NAME(S) M-981, M-982 CHEMICAL TYPE Barium/cadmium solid metal soaps COMPANY Interstab/Akzo Chemie
PRODUCT DETAILS Supplied in tablet form,981 is for use in white rigid PVC. Has exceptional UV stability and long-term stability in external applications. 982 has similar properties, and is for use in brown and beige coloured PVC.
END USE TRADE NAME(S)
CHEMICAL TYPE
CDMPANY
PRODUCT DETAILS
PLASTICIZERS 1) Unimoll 66M 2) Unimoll BB 3) Mesamoll 4) Mesamoll II 1) Dicyclohexyl phthalate 2) Butyl benzyl phthalate 3) Alkyl sulphonate of phenol 4) Alkyl sulphonate of phenol with lower volatiles Mobay Corp.
Unimoll BB is used to accelerate the gelling of flexible vinyls. Unimoll 66M is useful in improving the storage stability and fusing characteristics of low temperature fusing vinyl plastisols. The Mesamolls are used in flexible vinyl and polyurethane caulk and sealant compounds where low viscosity is required.
END USE TRADE NAME(S) CHEMICAL TYPE COMPANY
PLASTICIZERS Suprmix Unspecified C. P. Hall Co.
PRODUCT DETAILS Powdered plasticizers, similar to the Easy-Z-Mix range but with lower water sensitivity and improved low temperature properties.
ADDITIVES FOR No part of this publication may ba reproduced. stored in a retrieval system, or transmitted by any form or by any
POLYMERS means, electronic, mechanical, photocopying. recording or otherwise. without the prior permission of the publishers (Readers in the U.S.A. -please see special regulations listed on back cover.)
Vol. 17, No. 12, Page 11
END USE PLASTICIZER TRADE NAME(S) Plasthall E50 CHEMICAL TYPE Epoxidized soyabean oil CDMPANY C. P. Hall Co.
PR~UCT DETAILS An intermediate product between Plasthalt 662 (high perfor~nce) and 660 ~economy grade].
END USE TRADE NAME(S) CHEMICAL TYPE CDWANY
PLASTICIZERS Nuoplaz 6984, 6985 Low and medium molecular weight polymerics Nuodex
PRDDUCT DETAILS 6984 (low molecular weight) is said to have good low temperature properties. Uses include electrical tapes. 6985 (medium molecular weight) is a general purpose grade.
END USE TRADE HAHE CHEWIW TYPE CDMPAHY
PLASTICIZER Admex 760 High molecular weight compound Nuodex
PR~UCT DETAILS Of particular value where migration resistance is required.
END USE TRADE NAME(S) CHEWCAL TYPE CDHPAHY
CONDUCTIVE FILLER Metaspheres Ni Nickel-coated ceramic microspheres Fillite
PRODUCT DETAILS Lower-cost alternative to silver-coated fillers f$ZO-2511b.j.
END USE TRADE NAME(S)
CHEMICAL TYPE
CWPAHY
CONDUCTIVE CONCENTRATES 1) LO-692 2) LD-743 1) Contains 25% carbon black in HDPE 2) Contains 25% carbon black in a copolymer Ampacet Corp.
PRDD~T DETAKS Both can be used as &ompounds or as concentrates.
ADDWIVES FOR No part of this publication may be reproduced. stored in a retrieval system, or transmitted by any form or by any
POLYMERS means, electronic, mechanical, phot~opying, recording or otherwise, without the prior permission of the publishers. (Readers in the U.S.A.-please see special regulations listed on back cover.)
Vol. 17, No. 12, Page 12
END USE CDNDU~TjVE FJLLERS TRADE NAME(S) AgClad TW CHEMICAL TYPE Silver coated fillers COMPANY P. A. Industries Inc.
PRDDUCT DETAILS Available in microsphere, filament or flake form.
EN0 USE TRADE NAME(S) CHEMICAL TYPE CDMPANY
THERMAL CDND~CT~VE FILLER Airosperse 15 Carbon black J. M. Huber
PRODUCT DETAILS Has low grit content.
END USE TRADE WANE(S) CHEEKS TYPE CDUPANY
~DNDUCTIVE FILLER Ketjenbla~k EC-6OOJ~ Carbon black Akzo Chemie America/Noury Chemicals
PRDOUCT DETAILS Ultra high efficiency grade - double that of Ketjenblack EC- 3005 grade. Specifically for engineering thermoplastics where carbon black level must be kept to a mini~m.
EN0 USE TRADE NAI#EfS) CHEMICAL TYPE CDMPANY
~DND~CTIVE FILLER Ketjenblack EC-3OOJ Carbon black Noury Chemicals
PRODUCT DETAILS Low impurity grade with low grit and sulphur contents.
EN0 USE TRADE NAME(S) CHOIR TYPE COMPANY
FILLER Micro-White 50PE Calcium carbonate ECC America
PRODUCT DETAILS For glass-reinforced polyester SMC and BMC. Characteristics include high brightness and low viscosity.
ADD~TIVEQ FOR No part of this publication may be reproduced, stored in a retrievat system, or transmitted by any form or by any
POLYMERS means, electronic, mechanicaf, phot~op~ng, recording or otherwise, without the prior permission of the publishers. (Readers in the U.S.A.-please see special regulations listed on back cover.]
Vol. 17, No. 12, Page 13
END USE TRADE NW(S) CHEUICAL TYPE COUPANY
FILLER FOR PVC Super-Fil Limestone MPM Div. of Pfizer
PRATT DETAKS Surface-treated with particle size of between 2-8 microns. For use in highly-filled rigid extrusions.
END USE FILLER TRADE NAUE(S) Gammasperse CS-11 CHEUICAL. TYPE Calcium carbonate COUPANY Georgia Marble
PROUST DETAIIS An improved version of this filler that has been approved for use in PVC pipe. Has a stearate coupling agent chemically reacted to the surface.
END USE TRADE NAME(S) CHEWCAL TYPE COMPANY
~~UCT DETAILS
END USE TRADE NAM(S) CHEWCAl TYPE CDUPANY
PR~UCT DETAILS
FILLERS Omyacarb 3 and 5 Calcium carbonate Omya
Said to provide the free-flowing characteristics of dry-milled products in a particle size (coarse) more suitable for many applications including BMC s, SMC s, etc.
FILLER Suzorite 400s Fine particle mica Suzorite Mica
Average particle size of lo-30 microns to give better surface appearance to moulded components.
END USE TRADE NAUE(S) CHEMICAL TYPE CDMPANY
FILLER X-2720 Kaolin Engelhard
PRATT DETAILS Surface of the kaolin is tailored to provide improved reactivity, without the need for a coupling agent.
Cont ./. . . . . .
ADDITIVES FOR POLYMERS
o 1987 Ektier S&ace Publishers B-V., Amsterdam./87/$0.00 + 2.20 No part of this publication may be reproduced, stored in a retrievaf system, or transmitted by any form or by any means, electronic, mechanical. photocopying, recording or otherwise, without the prior permission of the publishers. (Readers in the U.S.A.-please see special regulations listed on back cover.)
Vol. 17, No. 12, Page 14
END USE TRADE NAME(S) CHEMICAL TYPE COWANY
PRODUCT DETAILS
END USE TRADE NAME(S) CHEMICAL TYPE COMPANY
PRODUCT DETAILS
END USE TRADE NAME(S) CHEWICM TYPE COMPANY
PRODUCT DETAILS
END USE TRADE NAUE(S) CHEWCAL TYPE COMPANY
PRODUCT DETAILS
END USE TRADE NAM(S) CHEMICAL TYPE CDHPANY
PRODUCT DETAILS
FILLER Dicaperl HP-810 Hollow glass microspheres Grefco Inc.
White grade surface modified with average particle size of 50 microns.
Designed for addition to injection moulding machines or extruders without previous compounding. CA-1 has an LDPE carrier. CA-45 is in rubber-modified polypropylene.
PIGMENT Zeolix 80 Synthetic sodium aluminium silicate J. M. Huber
Can be used to replace up to 30% of titanium dioxide in HDPE without loss of opacity and little effect on brightness.
PIGMENT Topsize BAS-5 Barium sulphate Fillite USA Inc.
Can also be used as a partial replacement for titanium dioxide. Is a finely ground grade (maximum size 8 microns).
PIGMENTS Meteor Mixed metal oxides that contain no antimony Harshaw Filtrol
High temperature pigments that include cadmium yellows ranging from green to red shades. Likely outlets include household goods.
Cont./. . . . . .
o 1987 Elsevier Science Publishers B.V.. Amsterdam./87/$O.Ott + 2.20
ADDITIVES FOR No part of this publication may be reproduced. stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the publishers.
POLYMERS (Readers in the U.S.A.-please see special regulations listed on back cover.)
Vol. 17, No. 12, Page 15
END USE PIGMENTS TRADE NAME(S) Hencotherm Yellow CHEMICAL TYPE Chrome Yellow CDHPANY Heubach
PRODUCT DETAILS Properties include higher brightness, improved chemical resistance, and around 50°F higher heat stability. The pigments are treated with the "Electrostat" process which reduces dusting.
END USE TRADE NAME(S) CHEMICAL TYPE CDMPANY
PIGMENTS Chromafine Blue 4945 A green-shade phthalo blue Oaicolor
PRDDUCT DETAILS For use in ABS. Has high heat stability.
END USE TRADE NAME(S) CHEMICAL TYPE CDMPANY
PIGMENTS V 9171 Red-Shade Brown Chrome-iron-zinc Ferro Corp.
PRODUCT DETAILS Exceptional heat stability is claimed for this pigment, which is for use in most thermoplastics and thermosets.
PRODUCT DETAILS GS-green shade; MS-medium shade; RS-red shade. Suitable for engineering thermoplastics. Have high heat stability, and good weatherability. Also recommended for PVC.
END USE TRADE WANE(S) CHEMICAL TYPE COMPANY
PIGMENT FOR PVC Iron-Free Chestnut Brown V9186 Manganese-antimony-titanium Ferro Corp.
PRODUCT DETAILS For PVC siding. Primarily intended for tint applications.
ADDITIVES FOR No part of this publication may be reproduced, stored in a retrieval system, or transmitted by any form or by any
POLYMERS means, electronic. mechanical, photocopying, recording or otherwise, without the prior permission of the publishers. (Readers in the U.S.A. - please see special regulations listed on back cover.)
Said to possess intense and brilliant white pearl lustre.
CQLOURANT Quindo Red R-6704 Quinacridone Mobay Chemical Corp.
Blue-shade red for use mostly in polyolefines and PVC. Excellent light fastness is claimed.
END USE FLUORESCENT PIGMENTS TRADE NAME(S) ZX Series CHEUICM TYPE Unspecified CDHPANY Day-G10
PRODUCT DETAILS New shades for specific brands of liquid detergent bottles include Liquid Tide Orange, Surf Orange, Wisk Fluorescent Red, and Dash Fluorescent Yellow. Designed to reduce plate-out during blow moulding.
END USE TRADE NAUE(S) CHEMICAL TYPE CCMPANY
ANTISTATIC AGENT CONCENTRATES Armostat 350 and 475 Based on ethoxylated tertiary amines Noury Chemicals/Akzo Chemie America
PRDDUCT DETAILS 350 contains 50% of a tallow-derived amine in an LOPE carrier. Recommended for LOPE film, sheet, and moulded components. 475 uses an amine derived from coconut oil. Contains 75% amine in a polypropylene carrier. For use in polypropylene film, sheet and moulded components.
END USE TRADE NAME(S) CHEMICAL TYPE CD~ANY
LUBRICANT FOR PVC Glycolube XL0 Unspecified Glyco
PRODUCT DETAILS Internal/external lubricant for siding, window profiles and pipe. Is a developmental product.
ADDITIVES FOR No part of this publication may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the publishers.
POLYMERS (Readers in the U.S.A. - please see special regulations listed on back cover.)
PRODUCT DETAILS HS 1 is in 100% active pellet form. For use in polystyrene, ABS, PVC, and styrene-based alloys. Improves flow, pigment dispersion, etc. 26427 is also pelleted, and is for use in HDPE and polypropylene film.
END USE INTERNAL ANTISTATIC AGENTS TRADE WANE(S) Atmer 122 and 125 CHEMICAL TYPE Glycerol monostearates CDNPANY ICI Americas
PRODUCT DETAILS 122 contains 52% alpha monoglyceride and 125 contains 40%. Particularly effective in polyolefines.
PRODUCT DETAILS 9915 contains both antistatic and antifogging agents and is for use in biaxially-oriented polypropylene film. 10761 contains 5% of an ethoxylated tertiary amine and is for use in polythene.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the publishers [Readers in the U.S.A. - please see special regulations listed on back cover.)
vol. 17, No. 12, Page 18
END USE TRADE NAME(S) CHEMICAL TYPE
COMPANY
POLYESTER FOAMING/CURING SYSTEM Benzofoam 1020 Aqueous dispersion of around 10% benzoyl peroxide and a bicarbonate salt US Peroxygen Products
PRODUCT DETAILS Patents have been applied for this system which acts as both a foaming and curing agent.
END USE SURFACE MODIFIERS FOR ATH TRADE NAME(S) PRF. PTD CHEMICAL TYPE Unspecified COMPANY Solem Industries
PRODUCT DETAILS Reactive surface modifiers for alumina trihydrate that improve the adhesion of ATH to the polymer matrix. Will work equally well in cross-linked polymers and thermoplastics. Improve the resistance to water permeation. Of interest for electrical applications.
END USE TRADE NAME(S) CHEMICAL TYPE
COMPANY
IMPACT MODIFIER SP-75 Contains a high performance calcium carbonate and styrene- butadiene rubber Pro-Alloy Corp.
PRODUCT DETAILS A concentrate for use in ABS and polystyrene.
END USE TRADE NAME(S) CHEMICAL TYPE COMPANY
IMPACT MODIFIERS Polymer Modifier X465 and X372 EPDM Uniroyal Chemical
PRODUCT DETAILS X465 is designed for nylon 6 or 66, and X372 is for thermoplastic polyesters. Both have good low temperature characteristics.
END USE TRADE NAME(S)
CHEMICAL TYPE
CDMPANY
IMPACT MODIFIERS 1) Novalene 2) Novalar 1 1) EPDM 2) High butadiene ABS Nova Polymers
PRODUCT DETAILS Novalene is designed for polypropylene and polythene, and Novalar 1 is for PVC.
ADDITIVES FOR No part of this publication may be reproduced, stored in a retrieval system. or transmitted by any form or by any
POLYMERS means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the publishers. (Readers in the U.S.A.-please see special regulations listed on back cover.)
