It takes much more than luck to be the dominant buck…what does it take to get to the top? If you’re Mathews, it’s a history of innovation and an unwavering dedication to making the world’s best bows.

Mathews…A history of innovation! It all started in 1992 when Mathews introduced the first single cam bow. The single cam system is the ultimate in pure simplicity. It has a multitude of advantages (more efficient, more forgiving, more accurate, faster, less recoil, less vibration, less noise, less maintenance, no synchronization problems). But Mathews didn’t stop there…

Zebra® ZS TwistTM bowstring (1994)

Lighter, shorter bows (1994)

StraightLine dual feed single cam

(1998)

Perimeter Weighted TechnologyTM

(1997)

Parallel limb design (1996)

Harmonic Damping SystemTM

(2000)

String SuppressorsTM

(2002)

Ball Bearing Roller Guard

(2002)

The InLine Grip (2004)

HP (High Performance) Cam (with ball bearings)

(2003)

V-LOCKTM Zero Tolerance Limb Cup System

(2003)

BroPgs 2_3 5/7/04 3:46 PM Page 1

Mathews wins more than ever before!In a year (2003) when other companies claimed to have superior technology, Mathews wins more than ever before. What does that tell you?

Who makes the most accurate, high performance bows in the world? The numbers don’t lie. It’s Mathews!

Does “EVERYBODY” shoot a Mathews?... If you’re a hunter who wants the best or a 3-D tournament archer who wants to win, you shoot a Mathews.

BroPgs 4_5 5/7/04 3:48 PM Page 1

The new Mathews OUTBACK™ It’s quieter – Mathews most parallel limbs everThe more parallel the two limbs, the more recoil is cancelled. And less recoil means less noise.

80%

Let off (65% available)

New InLine Grip-defines centerline A wood inlay shows you the center of the grip to establish centerline. Also ergo-nomically superior.

Speed without the kick!

It’s shorter — just 311/2”(approx.)

You can maneuver and shoot it where other bows don’t fit.

Just 311 /2” (approx.) a

xle-to-axle

The new is way out in front when it comes to high performance features...

• HP (High Performance) Cam – with ball bearings (smooth shooting, straight-line and high let off; the least complex, most advanced cam ever) • V-LOCKTM Zero Tolerance Limb Cup System – perfectly machined V-shaped “limb pocket” guides V-shaped limb into place for a snug, zero-tolerance fit • String SuppressorsTM

– “fingers” reach out and touch the bowstring so, upon release, string vibration is reduced • Ball Bearing Roller Guard – keeps cables away by rolling them through machined wheels to reduce friction • Harmonic Damping SystemTM

– weights on either end of the riser that float in elastic and eat up riser vibration • Perimeter Weighted TechnologyTM

– over-sized Inertia Disc™ that rides around outside of cam in opposition to limbs to increase speed and reduce recoil • Zebra® ZS TwistTM Bowstring – virtually eliminates peep rotation • 100% Fully Machined AeroRiserTM

– most other bows have cheap extruded risers • Ball Bearing Idler Wheel – it’s smooth

Black anodized aluminum

Brass dampers (both sets included)

Whether you hunt out back behind the barn, out back behind the cabin or out back in the far reaches of the mountains, plains or tundra, the new Mathews OUTBACKTM is the bow you’ll want to take!

New camo!

BroPgs 6_7 5/7/04 3:49 PM Page 1

All Mathews bows (except theBlack Max2 and FX) are available in four flavorful colors.

Root Beer Blueberry Kiwi Black Cherry

Speed without the kick!

Zero Tolerance Limb Cup System One big reason Mathews wins more tournaments is tight manufacturing tolerances. And one of the most critical areas on a bow is where the limb connects to the riser. Thanks to Mathews’ new V-Lock Limb Cup System, the tolerance is even tighter!

The perfectly machined V-shaped “limb pocket” precisely guides the V-shaped limb into place where it locks in for a perfectly snug, zero-tolerance fit. This is the most reliable, most dependable, and most accurate limb system ever devised!

The StraightLine HP cam is smooth shooting, high let-off and smokin’ fast!

• V-LOCKTM Zero Tolerance Limb Cup System • StraightLine HP (High Performance) Cam with ball bearings• Ball Bearing Roller Guard• Parallel Limb Design • Perimeter Weighted TechnologyTM• Fully-machined AeroRiserTM• Harmonic Damping SystemTM

The Mathews LX features the StraightLine HP (High Performance) Single Cam, the...

LEAST COMPLEX, MOST ADVANCED cam ever engineered! It’s superior to every cam we’ve ever tested. Everything, bar none!

New camo!

70% Let-off with hysteresis(officially Pope & Young legal)

Speed without the kick!

• Now everyone with a shorter draw length (19” to 26”) can shoot a Mathews! • Draw weights up to 50 lbs.

Perimeter weighted cam (more speed, less recoil)

Harmonic Dampers (reduce riser vibration)

String Suppressors (reduce string vibration)

Roller Guard (less friction)

The MUSTANG is available in draw lengths ranging from 19” to 26” and in peak draw weights from 20 to 50 lbs. There is a MUSTANG for virtually every short draw length shooter – man, woman, or child!

BroPgs 8_9 5/7/04 3:51 PM Page 1

One of the hottest selling Mathews bows ever

Flat out – the fastest bow independent tester, Norb Mullaney, has ever tested

• String SuppressorsTM

• Ball Bearing RollerGuard• Over-sized perimeter weight• Harmonic Damping SystemTM

• 34"(approx.) axle-to axle

• 36"(approx.) axle-to axle • Black MaxCamTM

65% (approx.) or 80% let-off available (approx.): 330+ fps IBO; 252 fps AMO• Turbo MaxCamTM – 50% let-off (approx.): 340+ fps

Over-sized perimeter weight

Roller Guard

Harmonic Dampers

Ball-bearing Idler Wheel

Ball-bearing Idler Wheel

String Suppressors TM

Black Max riser

Harmonic Dampers

String Suppressors TM

Competition Grip

Competition Grip

When the tournament is on the line, this is the bow you want in your hand

Fast, compact and light as a feather, the all-new Classic proves that good things do come in small packages!

The new Ovation is fully loaded with the Mathews innovations that will put you on the podium!

• 40" axle-to-axle (approx.)

• V-LOCKTM Limb System• Harmonic Damping SystemTM

• StraightLine HP Cam • String SuppressorsTM

• 3.6 lbs. (approx.) • 36" axle-to-axle (approx.) • MaxCamTM

• Harmonic Damping SystemTM

• String SuppressorsTM

The Classic features two vibration-quelling technologies – Harmonic Dampers and String Suppressors TM forsmooth, quiet shooting!

InLine Grip

Ball-bearing Idler Wheel

Ball-bearing Idler Wheel

InLine Grip

Speed without the kick!

Speed without the kick!

Speed without the kick!

Speed without the kick!

New camo!

All Mathews bows (except theBlack Max2 and FX) are available in four flavorful colors.

Root Beer Blueberry Kiwi Black CherryNew camo!

BroPgs 10_11 5/7/04 3:38 PM Page 1

The third generation of the bow that’s won more tournaments than any other

The Icon’s Concentric SoloCam® mirrors the shape and size of the idler wheel for consistency and accuracy

• V-LockTM Limb System• Harmonic Damping SystemTM

• Original MaxCamTM (standard)• Parallel Limb design (27 1/8" riser)• 41" (approx.) axle-to axle• 80%, 65% or 60% let-off (approx.)

• Concentric SoloCam® • String SuppressorsTM / Roller Guard • Harmonic Damping SystemTM

• 37"(approx.) axle-to axle • 70% let-off (approx.)

Roller Guard

Harmonic Dampers

Ball-bearing Idler Wheel

Ball-bearing Idler Wheel

Harmonic Dampers

String Suppressors

A small-profile, no frills power- house of a bow

• 3.3 lbs. (approx.)

• Original MaxCamTM (standard) • 80% (approx.) or

65% let-off available (approx.) • 34" axle-to axle (approx.) • Also available with Fin or FeatherTM Cam

Ball-bearing Idler Wheel

Competition Grip

Competition Grip

Competition Grip

The bow that everyone can shoot!

“Zero let-off” means no specific draw lengthBecause the Genesis System™ eliminates let-off on light draw weight bows (where it’s unnecessary), there are no specific draw length requirements. The result is a bow that fits virtually everyone (15” to 30”) and that a young person can’t outgrow.

Performs like a bow with higher poundage A Genesis™ bow, set at 20 lbs. (it’s adjustable from 10 to 20 lbs.), stores and releases energy comparable to that of a 35 lb. recurve! Plus, with zero let-off, it has the “holding weight” necessary to “pull the string from your finger,” making it easy to shoot.

Now available as a kit!

Introducing the GenesisTMPro…

When Matt McPherson developed the revolutionary Genesis bow, he did so with the intent of re-introducing archery to our nations youth. Through the efforts of many, that is happening, especially in the state of Kentucky where 90,000+ students participated last school year.

• Kids can’t outgrow it – because there is no specific draw length

• It’s simple to buy – no need to measure or fit for draw length

• It’s easy to shoot – beginners won’t develop bad habits because the draw length is always right

Mathews is a proud supporter of the National Archery In The Schools ProgramWhat nobody anticipated is the profound effect that archery would have in transforming the lives of students who weren’t the fastest, strongest or most athletic. Students who excelled at archery gained valuable self-confidence. And, while teachers knew archery would give them a

subject to base math, science and physics, lessons on, nobody anticipated the extent to which archery would impact attendance – students don’t want to miss archery day.

Give kids a shot in your state. Contact your DNR, Dept. of Education or local school. Tell them about Genesis (nasparchery.com).

The GenesisTM bow...

• Genesis bow• 5 Easton®

aluminum arrows• Color coordina-

ted arm guard• Color coordina-

ted belt quiver• Two targets• Informative

Owner’s Manual

Available in 6 colors

Starter kit includes:

• Higher draw weight

• Adjustable draw stop

• Larger center shot clearance

• Silver or black riser

(also available in Realtree™ Camo)

a competition-quality bow with an adjustable draw stop that lets you customize your draw length

TM

Speed without the kick!

Speed without the kick!

Speed without the kick!

BroPgs 12_13 5/7/04 3:40 PM Page 1

Classic Competition

Mathews premium bow caseBoth distinctive and durable, this bow case is crafted from the very finestmaterials and will protect your bow from the rigors of transportation.

Two-sizes: Standard: for bows longer than 35" Compact: for bows 35" or shorter

Two compartments -one for your bow, one for arrows

Replacement bow gripsGet a new grip! Classic and competition areall black walnut. InLine has wood inlay toshow grip center. All can be personalized.

ArrowWeb™ Quivers

One-pieceDetachable; fits all Mathews bows38” or shorter(longer bows requireoriginal one-piecequiver which is stillavailable)

Two-pieceNon-detachablequiver becomesintregal part of bow

Black Denim Shirt•Logo front•100% cotton denim•Button-down collar•Double-stitched seamsM-2XL

Ball caps• Sandwich bill

black cap; Velcro® adjustment

• Leather bill natural cap

• Leather bill two-tone with leather patch, side embroidery

• Two-tone Zebra cap,Velcro® adjustment

• Realtree™ X-tra cap natural logo Cap, natural logo

• Realtree™ Hardwoods HD cap, natural logo

Mathews T-Shirts• 100% cotton• Black or white with

Mathews logo frontS-4XL

• Blue/white tye-dye with Mathews Genesis logo M-2XL

Reversible Vest• Nylon to fleece• Logo front

(both sides)• Double full-length

zipper• Zip pockets

S-3XL

Shooter Shirts• 3 button, logo front polo• Black, white, or tan – S-4XL• Black available with

Zebra logo • Tan available with

women’s V-neck S-2XL

Rugged 600 denierouter fabric

Dual outside pockets Rich leather grips

Embossed fineleather logoRugged, double-

stitched construction

Two-tone styling

• Adjustable grippers hold five carbon or aluminum arrows

• Machined aluminum construction for lightweight durability

• Harmonic Dampers eat up vibration and noise

• Available in Realtree® X-tra or Hardwoods HD

Sweatshirts• Mid-weight • Medium gray• Mathews or

Zebra Logo

M-2XL

Heavy-duty lockable zippersfor security

Rubber-cleated bottom feetfor protection

Storage galore - six compartments in all

• Zippered front

• Logo front• Two pockets• Corded

elastic waist

S-3XL

Black Henley• 100% preshrunk cotton• 3 button placket• Logo front

M-2XL

Innovative accessories for your Mathews bow!

Carbide Harmonic DampersWant even more damping power? These Carbide Harmonic Dampers are nearly twice as heavy brass dampers for evenmore vibration-stopping weight-in-motion.

Two-piece (raised)For those with longer arrows. Raises arrows so nocks don’t extend beyond cam.Non-detachable.

Zebrawins over

$2,800,000in the last 4 years.

“ZS Twist™” bowstrings…the only strings with counter-twisted strandsYour peep won’t rotate as you draw with revolutionary “ZS Twist”bowstrings.All Mathews bows come with Zebra® ZS Twist™ bowstrings as standard equipment.

Mathews Micro Rest(now with drop-away conversion)Our precision-engineered rest that features independent micro-adjustments,a solid double-encased bushing system,an internal spring that won’t foul orbend and a full-length safety guard. Itnow comes with a drop-away conversion,too! Sizes: 0” or 1” overdraw; left or righthand; black, Realtree® X-tra™ orHardwoods HD.

“Making the Shot” CD-ROM…Mental coach Lanny Bassham and teacher Frank Pearson show you how to perform under pressure (to win a tourney or bag a big buck).Also available is their Accelerated Archery CD-ROM — one for compound bows,one for recurves.

Competition grip available in many exotic woods

InLine

Camo Jacket • Realtree™ Hardwoods HD camo• Quilted lining; knit cuffs, waist• Full zip front• Logo front

and back

S-3XL

Hooded Sweatshirt • Gold inside hood• Gold tie strings• 80/20 cotton/poly

S-4XL

Garment washed jacket • 100% cotton duck shell• Quilted lining• Double closure front

with snaps,brass zipper

• Logo front and back

S-4XL

Spring/Fall jacket • 100 microfiber• Double entry zippered pockets• Inside accessory pocket• Logo front and back

S-3XL

Heat Seal Patch• Embroidered• Sew-on or iron-on

Show them that you shoot a Mathews!

Fleece Pullover

Long Sleeve Camo T • Realtree™ Hardwoods

HD camo• 100% preshrunk

cotton• Logo Front

S-3XL

Mock Turtleneck• 100% pre-shrunk cotton• Long sleeve• Logo front

(embroidered)• Black, white

or tan

M-3XL

BroPgs 14_15 5/7/04 3:42 PM Page 1

Model IBO AMO Cam(s) Draw Draw Axle- Brace Physical Let- Rating Rating Length Weight to-Axle Height Weight off (FPS) (FPS) Length (Approx.) (Approx.) (%) (Approx.) (Approx.) (Approx.)

Outback 308 236 StraightLine 26 - 30 40 - 70 31.5" 7 5/8" 4.3 lbs. 80* OTHP Cam Half-Sizes

310 238 26.5 - 29.5 65

LX 315 238 StraightLine 25 - 30 40 - 70 35" 6 5/8" 4.25 lbs. 80* LXHP Cam Half-Sizes

317 240 25.5 - 29.5 65

Mustang 280 @ — Mustang 19 - 26 20 - 50 31.75" 5 3/4" 3.2 lbs. 70** 26"/50# Performance Half-Sizes

— Cam 22.5 - 25.5

Ovation 300 230 StraightLine 28 - 32 40 - 70 40" 8" 4.5 lbs. 80* OVHP Cam Half-Sizes

302 232 28.5 - 31.5 65

Classic 310 238 MaxCam 27 - 31 40 - 70 36" 7" 3.6 lbs. 80*

312 240 65

Mathews 308 235 Legacy 24 - 30 40 - 70 34" 7 1/2" 4.35 lbs. 70** Legacy StraightLine Half-Sizes MaxCam 27.5 - 29.5

Black Max2 330+ 252 Black MaxCam 25 - 30 40 - 70 36" 5 1/2" 3.5 lbs. 80* 330+ Black MaxCam 65 340+ Turbo MaxCam 50 Conquest 3 310 236 MaxCam 28 - 32 40 - 70 41" 7" 4.4 lbs. 80*

Mini MaxCam 24 - 29 65 Super Soft 28 - 32 60

Icon 300 230 Concentric 24 - 30 40 - 70 37" 7 5/8" 4.45 lbs. 70** SoloCam Half-Sizes

27.5 - 29.5

FX 308 235 MaxCam 27 - 31 40 - 70 34" 7 1/2" 3.3 lbs. 80* Mini MaxCam 23 - 28 65Fin or Feather Cam

2004 Bow Specification Chart

All Mathews bows come with a weight adjustment range of 10 lbs. (down). All have standard burger button, sight, and stabilizer holes. The cable slider on each model is a special nonsqueak Teflon® composite. The limbs are SlimlineTM and come with an original owner lifetime warranty. The machined aluminum limb cups totally contain the limb butts and pivot with the limbs, so no matter what the draw weight, the limbs are always firmly contained within the cup. High inertia limb cups are also available at an additional charge.

* Under new Pope&Young rules is legal but will be entered with an asterisk indicating high let-off

** 70% (with hysteresis), 65% AMO (P&Y legal) 919 River Road, P.O. Box 367, Sparta, Wisconsin 54656

(608) 269-2728 www.mathewsinc.com