+ All Categories
Home > Documents > maxicoll english catalog

maxicoll english catalog

Date post: 27-Mar-2016
Category:
Upload: turkoglu-tasarim
View: 232 times
Download: 1 times
Share this document with a friend
Description:
maxicoll english catalog
Popular Tags:
23
CONSTRUCTION CHEMICALS
Transcript
Page 1: maxicoll english catalog

CONSTRUCTION CHEMICALS

Page 2: maxicoll english catalog

Maxicoll Construction Chemicals, the construction industry since 2002 and their production of building materials for the chemical content of the domestic / international marketing issues serves.

Maxicoll Construction Chemicals production activities in Istanbul 'in, starting today, Kahramanmaras and Akhisar / Manisa ' in the production of Each passing day increases the capacity of the production facilities. In particular adhesives, joint fillers, heat insulation mortars, plasters, repair mortars and screeds to be the main product over twenty, a hundred sub-product and production activities are ongoing.

Determining customer satisfaction as the most important priority of our company, our customers' expectations and needs as soon as possible an effective, economical solutions. Also product design with all the requirements are able to provide our customers with all kinds of pre-and post sales technical information, product designs as needed to meet the needs of our customers are able to make the original.

Our company is equipped with modern testing devices of all products with the Quality Control and R & D laboratories, able to ensure compliance with relevant quality standards and develop. Maxicoll Construction Chemicals has given importance to quality, international quality standard ISO 9001: 2000 quality management certificate in taking the proven. In addition, the TSE is necessary and important to our industry standards EN 12004 and EN 13888 standards have been manufacturing products.

Young and dynamic staff, exclusive dealers throughout Turkey over the years and experienced hand in hand with our customers by providing quality, primary goal is to create a solid and aesthetic interest.

FAMILY MAXICOLL maximum quality, maximum convenience

Page 3: maxicoll english catalog

MAXICOLL EXTRA GRAY ADHESİVECeramic / Tile

Cement and mineral filler based single-component ceramic, tile adhesive mortar that contains chemical

additives to increase the open-time and the performance of the product.

Indoor and outdoor, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, alum can be used

in cement-based substrates. Minimum of 3% water absorption, is an ideal product for small and

medium-sized tiles.

The product shelf life, dry environment, the original package is 12 months.

Appearance: Grey Powder

Packaging: 25 kg kraft bag

Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water

Consumption:4.5-5.5 kg / m²

MAXICOLL EXTRA WHITE ADHESIVE

Ceramic / Tile

Cement, mineral filler and polymer based high adhesion strength, single component, flexible, ceramic,

tile, granite, adhesive mortar that contains chemical additives to increase the open-time and the

performance and reduce slippage of the product.

Interior and exterior, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and cement-

based substrates, the human density is more than shopping-business centers, hospitals, schools can be

used in such places. Excellent adhesion to all surfaces.

The product shelf life, dry environment, the original package is 12 months.

Appearance: White Powder

Packaging: 25 kg kraft bag

Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water

Consumption: 5-6 kg / m² (back of the big size tiles must be covered with mortar)

MAXİCOLL GRAY ADHESİVECeramic / Tile / Granite

Cement, mineral filler and polymer based high adhesion strength, single component, flexible, ceramic,

tile, granite, adhesive mortar that contains chemical additives to increase the open-time and the

performance and reduce slippage of the product.

Interior and exterior, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and cement-

based substrates, the human density is more than shopping-business centers, hospitals, schools can be

used in such places. Excellent adhesion to all surfaces.

The product shelf life, dry environment, the original package is 12 months.

Appearance: Grey Powder

Packaging: 25 kg kraft bag

Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water

Consumption:5-6 kg/m² (back of the big size tiles must be covered with mortar)

CONSTRUCTION CHEMICALS

extragrey

CERAMIC - TILE

ADHESIVE

TYPE C1T

CONSTRUCTION CHEMICALS

extrawhite

CERAMIC - TILE

ADHESIVE

TYPE C1T

CONSTRUCTION CHEMICALS

flexgrey

CERAMIC - TILE - GRANITE

ADHESIVE

TYPE C2TE

Page 4: maxicoll english catalog

MAXICOLL FLEX WHITE ADHESIVE

Ceramic / Tile / Granite

Cement, mineral filler and polymer based high adhesion strength, single component, flexible, ceramic,

tile, granite, adhesive mortar that contains chemical additives to increase the open-time and the

performance and reduce slippage of the product.

Interior and exterior, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and

cement-based substrates, the human density is more than shopping-business centers, hospitals,

schools can be used in such places. Excellent adhesion to all surfaces.

The product shelf life, dry environment, the original package is 12 months.

Appearance: White Powder

Packaging: 25 kg \ health kraft bag

Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water

Consumption:5-6 kg/ m² (back of the big size tiles must be covered with mortar)

FLEX MORTAR GRAY ADHESIVE Ceramics / Tiles / Granite / Porcelain

Cement, mineral filler and extra polymer based high adhesion strength, single component, flexible,

ceramic, tile, granite, porcelain adhesive mortar that contains chemical additives to increase the open-

time and the performance and reduce slippage of the product.Due to high thixotropic property of the

last inserted resistance against slipping. 0.5% 'up to the maximum water absorption materials are ideal

for 50x50 size. Indoor and outdoor, wall and floor, wet and dry surfaces, all kinds of concrete, plaster,

grout, and cement-based surfaces, heated from below, the sudden heat changes is more, the traffic

load and exposed to intensive factory, warehouse space, can be used in areas such as shopping-

business center. Excellent adhesion to all surfaces.

The product shelf life, dry environment, the original package is 12 months.

Appearance: Grey Powder

Packaging: 25 kg kraft bag

Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water

Consumption:5-6 kg/ m² (back of the big size tiles must be covered with mortar)

MAXICOLL FLEX MORTAR WHITE ADHESIVECeramics / Tiles / Granite / Porcelain

Cement, mineral filler and extra polymer based high adhesion strength, single component, flexible,

ceramic, tile, granite, porcelain adhesive mortar that contains chemical additives to increase the open-

time and the performance and reduce slippage of the product.Due to high thixotropic property of the

last inserted resistance against slipping. 0.5% 'up to the maximum water absorption materials are ideal

for 50x50 size. Indoor and outdoor, wall and floor, wet and dry surfaces, all kinds of concrete, plaster,

grout, and cement-based surfaces, heated from below, the sudden heat changes is more, the traffic

load and exposed to intensive factory, warehouse space, can be used in areas such as shopping-

business center. Excellent adhesion to all surfaces.

The product shelf life, dry environment, the original package is 12 months.

Appearance: Grey, White Powder

Packaging: 25 kg \ health kraft bag

Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water

Consumption:5-6 kg/ m² (back of the big size tiles must be covered with mortar)

CONSTRUCTION CHEMICALS

flexwhite

CERAMIC - TILE - GRANITE

ADHESIVE

TYPE C2TE

CONSTRUCTION CHEMICALS

flex mortargrey

CERAMIC - TILE GRANITE - PORCLEAIN

ADHESIVE

TYPE C2TE

CONSTRUCTION CHEMICALS

flex mortarwhite

CERAMIC - TILE GRANITE - PORCLEAIN

ADHESIVE

TYPE C2TE

Page 5: maxicoll english catalog

MAXICOLL ULTRA FLEX WHITE ADHESIVEGranite / Marble / Porcelain / Natural Stone

Cement, mineral filler and extra polymer based very high adhesion strength, single component,

flexible, granite, porcelain, marble, natural stone adhesive mortar that contains chemical additives to

increase the open-time and the performance and reduce slippage of the product. Due to high

thixotropic property of the last inserted resistance against slipping. % 0 'up to the maximum water

absorption materials are ideal for 60x60 size.

Interior and exterior, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and

cement-based surfaces, heated from below, the sudden changes in temperature than that intense load

and exposed to traffic, factory, warehouse, hospital, shopping center in areas such as bonding of

ceramics is also easily available pool. Excellent adhesion to all surfaces.

The product shelf life, dry environment, the original package is 12 months

Appearance: Grey, White Powder

Packaging: 25 kg \ kraft bag

Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water

Consumption:5-6 kg/ m² (back of the big size tiles must be covered with mortar)

MAXICOLL RAPID SETTING FLEX GRAY ADHESIVE Ceramics / Tiles / Granite / Porcelain / Marble / Natural Stone

Cement, mineral filler, polymer and high alumina cement based high adhesion strength, single

component, flexible, quick set, ceramic, tile, granite, porcelain, marble, natural stone adhesive mortar

that contains chemical additives to increase the open-time and the performance and reduce slippage of

the product.

Indoor and outdoor, wall and floor, mid-grade wet and dry soils, concrete, plaster, grout, and cement-

based surfaces, provides excellent adhesion. Very intense, in areas exposed to pedestrian traffic, will

be on the heated surfaces and metal parts. Due to it’s rapid settingproperty, it could not be diffuse very

large areas. Adhesive application can be made a minimum of 5 hours after the grouting process.

The product shelf life, dry environment in original packaging is 6 months.

Appearance: Grey Powder

Packaging: 25 kg \ 'health kraft bag

Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water

Consumption:4-5 kg/ m²

MAXICOLL ULTRA FLEX MORTAR GRAY ADHESIVEGranite / Marble / Porcelain / Natural Stone

Cement, mineral filler and extra polymer based very high adhesion strength, single component,

flexible, granite, porcelain, marble, natural stone adhesive mortar that contains chemical additives to

increase the open-time and the performance and reduce slippage of the product. Due to high

thixotropic property of the last inserted resistance against slipping. % 0 'up to the maximum water

absorption materials are ideal for 60x60 size.

Interior and exterior, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and

cement-based surfaces, heated from below, the sudden changes in temperature than that intense load

and exposed to traffic, factory, warehouse, hospital, shopping center in areas such as bonding of

ceramics is also easily available pool. Excellent adhesion to all surfaces.

The product shelf life, dry environment, the original package is 12 months

Appearance: Grey Powder

Packaging: 25 kg kraft bag

Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water

Consumption:5-6 kg/ m² (back of the big size tiles must be covered with mortar)

CONSTRUCTION CHEMICALS

ultra flexgrey

SWIMMING POOL TILESWATERPROOFING

FACTORIES GRANITE FOR BUSİNESS CENTERS

MARBLE

ADHESIVE

TYPE C2TE

new

new

CONSTRUCTION CHEMICALS

The Fast Socket

GreyCERAMIC - TILE - GRANITE

MARBLE - PORCELAIN NATUREL STONE

FLEXADHESIVE

TYPE C2F

CONSTRUCTION CHEMICALS

ultra flexwhite

SWIMMING POOL TILESWATERPROOFING

FACTORIES GRANITE FOR BUSİNESS CENTERS

MARBLE

ADHESIVE

TYPE C2TE

Page 6: maxicoll english catalog

MAXICOLL CELLULAR CONCRETE BIMS BRICK KNITTING MORTAR Cellular Concrete/ Bims Brick

Cement and mineral filler-based, highly polymer additive, single-component, paste, and plastering (for

joints) mortar. Product performance and operation (application) contains chemical additives to increase

the duration. Glass laying bricks glued on top of all the BTB and the types of glass mosaic and glue

used to fill joints.

The product shelf life, dry environment in original packaging is 6 months.

Appearance: Grey powder

Packaging: 25 kg kraft bag

Water mixing ratio: Dust, 25 kg, 6.5 7.5 liter of water

Consumption: 6-8 kg / m² for the dimensions of 20x50x20 cellular concrete

MAXICOLL GLASS BRICK KNITTING MORTAR Glass Brick / BTB / Glass Mosaic White

cement and mineral filler-based, highly polymer additive, single-component, paste, and plastering (for

joints) mortar. Product performance and operation (application) contains chemical additives to increase

the duration. Glass laying bricks glued on top of all the BTB and the types of glass mosaic and glue

used to fill joints.

The product shelf life, dry environment in original packaging is 6 months.

Appearance: white powder

Packaging: 25 kg kraft bag

Water Mixing Ratio: Dust, 25 kg, 6- 7 liter of water

Comsumption:2 kg/ m² to 8 mm in thickness of the joint

RAPID SETTING FLEX WHITE ADHESIVE Ceramics / Tiles / Granite / Porcelain / Marble / Natural Stone

Cement, mineral filler, polymer and high alumina cement based high adhesion strength, single

component, flexible, quick set, ceramic, tile, granite, porcelain, marble, natural stone adhesive mortar

that contains chemical additives to increase the open-time and the performance and reduce slippage of

the product.

Indoor and outdoor, wall and floor, mid-grade wet and dry soils, concrete, plaster, grout, and cement-

based surfaces, provides excellent adhesion. Very intense, in areas exposed to pedestrian traffic, will

be on the heated surfaces and metal parts. Due to it’s rapid settingproperty, it could not be diffuse very

large areas. Adhesive application can be made a minimum of 5 hours after the grouting process.

The product shelf life, dry environment in original packaging is 6 months.

Appearance: White Powder

Packaging: 25 kg kraft bag

Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water

Consumption:4-5 kg/ m² (for big size tiles 5-6 kg/m²)

CONSTRUCTION CHEMICALSRAPID SETTING

FLEX WHITE ADHESIVE

CERAMIC - TILE - GRANITEMARBLE - PORCELAIN

NATUREL STONE

FLEXADHESIVE

TYPE C2F

CONSTRUCTION CHEMICALS

GLASS BRICK

ADHESIVE

MORTAR – KNITTING

GLASS BRICKS BTB

GLASS MOSAIC

white

CONSTRUCTION CHEMICALSGas Concrete

MAXICOLL CELLULAR

CONCRETE BIMS BRICK

KNITTING MORTAR

POLYMER REINFORCEDGAS CONCRETE

ADHESIVE BASED MINERAL FILLER

Grey

Page 7: maxicoll english catalog

MAXICOLL STYROFOAM PLASTEREPS / XPS / ROCKWOOL / GLASS WOOL

Cement and mineral filler based, fiber reinforced, polymer-reinforced, easily applied, adhesive applied

to a very good heat insulation slab heat insulation plate plaster. Of all kinds in order to provide heat

insulation, interior and exterior EPS, XPS, Rock Wool, Glass Wool Heat insulation panels, such as

plaster is applied on the surface. Thermal insulation panel mesh is applied on the plaster dries. File the

application on the second floor for 3-4 hours.

The product shelf life, dry environment, the original package is 12 months.

Appearance: Grey Powder

Packing: 25 kg kraft bags

Water Mixing Ratio: Dust, 25 kg, 6- 6,5 liter of water

Comsumption:4-4.5 kg/ m² (it can be changed according to surface properties)

MAXICOLL THİN REPAİR MORTARRepair Mortar,

Cement and mineral filler based, fiber reinforced, polymer-reinforced, high-strength, one component

repair mortar repair. -1 mm in thickness of the thin repair mortar for Grain, for thick repair mortar - 4 mm

is. Interior and exterior, concrete, plaster, cement and so on. structure of the floors and walls for cracks,

wear, and filling gaps, repair, reinforcement and strengthening of the weak and worn surfaces, as a

result of erosion of reinforcement bars are used to repair damaged concrete. 3-20 mm in thickness for

thin repair mortar, a thick repair mortar for the 5 - 40 mm. Very humid or very hot weather, making the

application should be avoided as much as possible.

The product shelf life, dry environment, the original package is 6 months.

Appearance: grey Powder

Packing: 25 kg kraft bags

Water Mixing Ratio: Dust, 25 kg, 5- 5,5 liter of water

Comsumption:1.6 kg/ m²( for 1 mm thickness)

MAXICOLL STYROFOAM ADHESIVEEPS / XPS / ROCKWOOL / GLASS WOOL

Cement and mineral filler based, fiber reinforced, polymer-reinforced, heat-insulating sheet-adhesive

glue is applied to the surface very well. All kinds of internal and external fronts in order to provide

thermal insulation EPS, XPS, stone wool, glass wool as thermal insulation panels used for bonding.

Each kind of plaster, concrete, bricks, aerated concrete, pumice, brick, brick and so on. structural

elements can be applied over.

The product shelf life, dry environment, the original package is 12 months.

Appearance: Grey Powder

Packing: 25 kg kraft bags

Water Mixing Ratio: Dust, 25 kg, 6- 6,5 liter of water

Comsumption:4-4.5 kg/m²( it can be changed according to surface properties)

CONSTRUCTION CHEMICALS

Styrofoam Adhesive

EPS - XPS - ROCKWOOL GLASS WOOL FOR

FLEX DOPED FIBER

EXTERIOR THERMAL SHEATHING ADHESIVE

High Strength

CONSTRUCTION CHEMICALSStrafor Plaster

GreyEPS - XPS

ROCKWOOL

GLASS WOOL

FLEXDOPED FIBER

PLASTER COATING

Splinterproof Water

Repellent

CONSTRUCTION CHEMICALS

Repair Mortar

DOPED FIBER HIGH STRENGTH REPAIR MORTAR

thin

splinterproof

Page 8: maxicoll english catalog

MAXİCOLL SURFACE HARDENERFresh concrete is used as the monolithic, concrete dust, wear, abrasion and chemical resistance

increases, based on cement and mineral filler, polymer additives, high-strength surface hardener. The

factory, warehouse, garage, parking, garage, exhibition, supermarket, aircraft hangars Harmful if

applied to areas of medium and heavy loads, such as exposed. Surface hardener is applied in powder

form aggregates in the material should not be placed long distances to decomposition.

The product shelf life, dry environment in original packaging is 6 months.

Appearance: Grey, Pink, Red, Green Powder

Packing: 25 kg kraft bags

Comsumption:4-6 kg/m² (changes with load capacity)

MAXICOLL SELF LEVELLING GROUT

Cement and mineral filler based, fast setting, self-leveling, high-strength floor leveling mortar. All interior

surfaces of buildings exposed to medium and heavy traffic in the last floor coating alum

pre-leveling, as well as domestic fronts, ceramic, marble , tile, pvc, laminates, parquet floor before such

applications are to fix. 60 minutes before administration of foot and mouth maxicoll surface must be

primed with primer levelling surface bonding enhancer. Medium-density surfaces, thickness 2-10 mm,

5-20 mm high-density surfaces.

The product shelf life, dry environment in original packaging is 6 months.

Appearance: White Powder

Packing: 25 kg kraft bags

Water Mixing Ratio: Dust, 25 kg, 5- 5,5 liter of water

Comsumption:1,5 kg/m²( for 1 mm thickness)

MAXICOLL THICK REPAIR MORTARREPAİR MORTAR,

Cement and mineral filler based, fiber reinforced, polymer-reinforced, high-strength, one component

repair mortar repair. -1 mm in thickness of the thin repair mortar for Grain, for thick repair mortar - 4 mm

is. Interior and exterior, concrete, plaster, cement and so on. structure of the floors and walls for cracks,

wear, and filling gaps, repair, reinforcement and strengthening of the weak and worn surfaces, as a

result of erosion of reinforcement bars are used to repair damaged concrete. 3-20 mm in thickness for

thin repair mortar, a thick repair mortar for the 5 - 40 mm. Very humid or very hot weather, making the

application should be avoided as much as possible.

The product shelf life, dry environment, the original package is 6 months.

Appearance: grey Powder

Packing: 25 kg kraft bags

Water Mixing Ratio: Dust, 25 kg, 5- 5,5 liter of water

Comsumption:1,6 kg/m²( for 1 mm thickness)

CONSTRUCTION CHEMICALS

Repair Mortar

DOPED FIBER HIGH STRENGTH REPAIR MORTAR

thick

splinterproof

CONSTRUCTION CHEMICALS

Surface Hardener

Factory - Warehouse - ParkingGarage - Fair

For Aircraft Hangars

Polymer Additives

High Strength

Bag Price Grey

newBag Price Pink Bag Price Red Bag Price Green

CONSTRUCTION CHEMICALS

Self Levelling

Grout

Cement Based Quick Connectors Area

Polymer Reinforced

Splinterproof

Page 9: maxicoll english catalog

MAXICOLL DECORATIVE PLASTER White cement , mineral filler and polymer based, weather resistant exterior, comfortable final coat

plaster mortar. Exteriors for decorative purposes, each type of concrete, and plaster applied over

thermal insulation panel. Cellular Concrete, gross concrete, rough plaster is made on the application,

the surface must be primed with Primer Maxicoll Leveling Surface Bonding Enhancer.

The product shelf life, dry environment in original packaging is 6 months.

Appearance: White Powder

Packing: 25 kg kraft bags

Water Mixing Ratio: : Dust, 25 kg, 6,5- 7 liter of water

Consumption: 1.5 kg/ m² (for 1 mm thickness)

MAXICOLL CRYSTALLINE SINGLE COMPONENT WATERPROOFING MORTARCement, mineral filler and extra polymer based ,single component waterproofing plaster.

The pools, canals, foundations, water tanks, basement walls, tunnels, the walls of the ground, water

and humidity can easily be applied to all the inner and outer walls. The application must be made in two

layers. First floor cured (depending on ambient temperature, about 2-4 hours) after the second coat is

made perpendicular to the first floor.

The product shelf life, dry environment in original packaging is 6 months.

Appearance: Grey Powder

Packing: 25 kg kraft bags

Mixing Ratio: Dust, 25 kg, 7- 7,5 liter of water

Consumption: 2 to 2.5 kg/ m² (1st floor), 1 to 1.5 kg / m 2 (2nd floor)

new

CONSTRUCTION CHEMICALS

ROUGH

FLAT

ALUM Self-settled

Large Filled with sandUse together.

Self Leveling

Mortar

DECORATIVE

PLASTER

All-Purpose Type Thermal Insulation Panels Decorative

Concrete Exterior Wallsand plaster on the applicable

Coat Mortar

CONSTRUCTION CHEMICALS

Bag Price / White / Ivory /Beige

CRYSTALLINE

WATERPROOFING

MORTAR GREY

Water and Moisture Field LocationsPools

Basement wallsChannels

Providing Water ProofingSingle Component

CONSTRUCTION CHEMICALS

Water

Insulation

Plaster

Self Levelling

Mortar +

MAXICOLL ROUGH FLAT ALUM

Based cement and mineral filler, the fluid screed. Buildings are

in rough screed, self-settled, large filled structure, can also be

applied by machine. 25 kg of dust, 40 kg \ 'health packages are

in the thick with silica sand. 10 cm ' up to be applied.

The product shelf life, dry conditions, 12 months in original

packaging.

Appearance: Grey Powder

Packing: 25 kg kraft bags

40 kg thick silica sand bags along

Water Mixing Ratio: Dust, 25 kg, 5- 5,5 liter of water

Consumption: 25 kg/ m²

Page 10: maxicoll english catalog

MAXICOLL SUPER ELASTIC DOUBLE COMPONENT WATER INSULATION MORTAR

Based cement and mineral filler, including acrylic dispersion, two-component, polymer and silicone, flexible, waterproof material. All kinds of concrete and plaster can be applied to ensure water tightness. Deformations due to high elasticity is not affected. Into and out of buildings waterproofing, crack repair, repairs, corrosion prevention procedures is ideal. Terraces, balconies, storage, screen and retaining walls, foundations, basements, swimming pools, bridges can be used easily. Not be exposed to direct sunlight. Loose mortar (20 kg) of liquid component (10 kg) used in combination. Application is made at least 2 coats, 2-6 sales should be expected between the two coats, second coat is applied perpendicular to the first floor. Application of the surface dries, the tile, tiles and so on. bonded flooring materials.

The product shelf life, dry environment in original packaging is 6 months. Appearance: White, Grey Powder White liquid Packaging: 20 kg kraft bags + 10 kg plastic drum Total 30 kg setConsumption: 1.5 to 2 kg / m² (for each floor)

Water

Insulation

Plaster..

Water and HumiditySubject to

Bathroom, KitchenShower WC v.s. for

CONSTRUCTION CHEMICALS

Semi-Elastic

Dual Component

Powder Component

Water Insulation Plaster..

Water and HumiditySubject to

Bathroom, KitchenShower WC v.s. for

CONSTRUCTION CHEMICALS

Semi Elastic Dual Component

Powder Component

Water Insulation Plaster..

CONSTRUCTION CHEMICALS

Semi Elastic Dual Component

Powder Component

20 kg Powder Component + 10 kg of liquid Component Set Price

White Grey

20 kg Powder Component + 10 kg of liquid Component Set Price

new

Water

Insulation

Plaster..

CONSTRUCTION CHEMICALS

Semi-Elastic

Dual Component

Powder Component

20 kg Powder Component + 5 kg of liquid Component Set Price

White

20 kg Powder Component + 5 kg of liquid Component Set Price

Grey new

MAXICOLL HALF- ELASTIC DOUBLE COMPONENT WATER INSULATION MORTARCement and mineral filler based, acrylic emulsion, containing two-component, polymer and silicon-doped, semi-flexible waterproofing material. All kinds of concrete and plaster can be applied to ensure water tightness. Exposed to water and moisture bathroom, kitchen, shower, wc fields such as water is applied in order to provide insulation. Very high water pressure in places that are not recommended for use. Not be exposed to direct sunlight. Loose mortar (20 kg), the liquid component (5 kg) used in combination. If the application is made at least 2-fold. 2-6 sales should be expected between the two coats, second coat is applied perpendicular to the first floor. Application of the surface dries, the tile, tiles and so on. bonded flooring materials.

The product shelf life, dry environment in original packaging is 6 months. Appearance: White, Grey Powder White liquid Packaging: 20 kg kraft bags + 5 kg plastic drum Total 25 kg setConsumption: 1.5 to 2 kg / m² (for each floor)

Page 11: maxicoll english catalog

MAXICOLL MULTI-PURPOSE MORTAR ADDITIVE Styrene acrylic-based, cement and other fillers compatible , in liquid form ready for use dispersion. Together increases the strength of adhesion of the product is used. together with Maxicoll Extra Adhesive, Maxicoll Flex Adhesive, Maxicoll Flex Mortar Adhesives and Maxicoll Ultra-Flex Adhesive;it is ideal for Ceramic over ceramic tiles , granite, porcelain bonding, ceramic over gypsum board bonding, fiber cement board over ceramic tiles, chipboard bonding, chipboard over ceramic applications, swimming pool and pool hull isolation .Maxicoll Multi-purpose mortar additive is added to mortar 25 kg dust to 2,5-4 kg additive ratio . Consistency of the mortar is set with water. If you have absorbing properties of the surface (particularly gypsum board, fiber cement board substrates), using a brush to the surface Maxicoll Multi-purpose mortar additive is applied in a single layer (650-750 g/m²). Then dispersed mortar applied to the surface.

The product shelf life, dry environment, the original packaging is 6 months. Appearance: White liquid Package: 20, 10 and 5 kg plastic drumsConsumption: 0.2-0.3 kg / m² (application may vary according to surface conditions)

MAXICOLL SURFACE LEVELLING PRIMERStyrene acrylic based adhesion promoter, cement and other fillers compatible with all of the liquid dispersion form, ready for use. Alum covered surfaces with the surface to increase adherence and hence better adhesion to the surface to ensure that the alum is applied. In addition, the surface water absorption property is removed, can also be applied before application of plaster.

The product shelf life, dry conditions, for 6 months in original packaging. Appearance: White Liquid Packaging: 20, 10 and 5 kg plastic drums Consumption: 0.2-0.3 kg / m 2 (application may vary according to surface conditions)

MAXICOLL 0-6 mm FUGA JOINT FILLER White cement and fine mineral based joint filler that increase product performance, cracking, corrosion resistance to joint filler containing chemical additives. Water resistant. Resistant to cracking in joints between 0-6 mm, bending and compressive strength is high, suitable for bathrooms and kitchens, servants, ceramic, granite, marble floors are ideal. Wide range of colors available. After application the surface, can be opened for use after 24-48 hours.

The product shelf life, dry conditions, in original packaging 12 months. Appearance: White or colored a very fine-grained powder. Packaging: 20, 10, 5 kg kraft bags Consumption (see Table-1): 0-6 mm the theoretical Joint consumption tableWater Mixing Ratio: dust 20 kg , 5,5-6 lt water

MULTI-PURPOSE CONTRIBUTION CHARGES

CONSTRUCTION CHEMICALS

MULTI-PURPOSE CONTRIBUTION CHARGES

CONSTRUCTION CHEMICALS

MULTI-PURPOSE CONTRIBUTION CHARGES

CONSTRUCTION CHEMICALS

new

5 lt. 10 lt. 20 lt.

PRIMER SURFACE LEVELLING

CONSTRUCTION CHEMICALS

PRIMER SURFACE LEVELLING

CONSTRUCTION CHEMICALS

PRIMER SURFACE LEVELLING

CONSTRUCTION CHEMICALS

new

5 lt. 10 lt. 20 lt.

CONSTRUCTION CHEMICALS

0-6mmCERAMIC - TILE

GRANITE - PORCELAIN

JOINT FILLER

TYPE CG1

COLOR

White

Weight ColorWhite

Ivory/Beige/Pink/GreyFawn/Verification Beige/Dark Grey/Lilac/Ice Blue/

Purple/Cinnamon/Smoked/OrangePistachio Green/Dark Smoked

BrownGreenWhite

Ivory/Beige/Pink/GreyFawn/Verification Beige/Dark Grey/Lilac/Ice Blue/

Purple/Cinnamon/Smoked/OrangePistachio Green/Dark Smoked

BrownGreenWhite

Ivory/Beige/Pink/GreyFawn/Verification Beige/Dark Grey/Lilac/Ice Blue/

Purple/Cinnamon/Smoked/OrangePistachio Green/Dark Smoked

BrownGreen

Page 12: maxicoll english catalog

MAXICOLL 3-15 MM FLEX FUGA JOINT FILLERWhite cement, fine mineral and extra polymer based joint filler that increase product performance, cracking, corrosion resistance to joint filler containing chemical additives. Water resistant. Resistant to cracking in joints between 3-15 mm, bending and compressive strength is high, suitable for bathrooms and kitchens, servants,shopping centers, ceramic, granite, marble floors are ideal. Wide range of colors available. After application the surface, can be opened for use after 24-48 hours.

The product shelf life, dry conditions, in original packaging 12 months. Appearance: White or colored a very fine-grained powder. Packaging: 20, 10, 5 kg kraft bags Consumption (see Table-2): 3-15 mm the theoretical Joint consumption tableWater Mixing Ratio: dust 20 kg , 5,5-6 lt water

MAXICOLL 3-20 mm ULTRA FLEX SILICONE JOINT FILLER

White cement, fine mineral and extra polymer based joint filler that increase product performance, cracking, corrosion resistance to joint filler containing chemical additives. High Water resistant. Resistant to cracking in joints between 3-20 mm, bending and compressive strength is so high, suitable for bathrooms and kitchens, servants,shopping centers,swimming pools, hospitals, ceramic, granite, marble floors are ideal. Wide range of colors available. After application the surface, can be opened for use after 24-48 hours.

The product shelf life, dry conditions, in original packaging 12 months. Appearance: White or colored a very fine-grained powder. Packaging: 20, 10, 5 kg kraft bags Consumption (see Table-3): 3-20 mm the theoretical Joint consumption tableWater Mixing Ratio: dust 20 kg , 5,5-6 lt water

CONSTRUCTION CHEMICALS

flex fuga3-15 mm

CERAMIC - TILEGRANITE - PORCELAIN

MARBLE - NUTEREL STONE

JOINT FILLER

TYPE CG2WA

COLOR

White

Weight ColorWhite

Ivory/Beige/Pink/GreyFawn/Verification Beige/Dark Grey/Lilac/Ice Blue/

Purple/Cinnamon/Smoked/OrangePistachio Green/Dark Smoked

BrownGreenWhite

Ivory/Beige/Pink/GreyFawn/Verification Beige/Dark Grey/Lilac/Ice Blue/

Purple/Cinnamon/Smoked/OrangePistachio Green/Dark Smoked

BrownGreenWhite

Ivory/Beige/Pink/GreyFawn/Verification Beige/Dark Grey/Lilac/Ice Blue/

Purple/Cinnamon/Smoked/OrangePistachio Green/Dark Smoked

BrownGreen

Weight ColorWhite

Ivory/Beige/Pink/GreyFawn/Verification Beige/Dark Grey/Lilac/Ice Blue/

Purple/Cinnamon/Smoked/OrangePistachio Green/Dark Smoked

BrownGreen/Black

WhiteIvory/Beige/Pink/Grey

Fawn/Verification Beige/Dark Grey/Lilac/Ice Blue/Purple/Cinnamon/Smoked/Orange

Pistachio Green/Dark SmokedBrown

Green/BlackWhite

Ivory/Beige/Pink/GreyFawn/Verification Beige/Dark Grey/Lilac/Ice Blue/

Purple/Cinnamon/Smoked/OrangePistachio Green/Dark Smoked

BrownGreen

CONSTRUCTION CHEMICALS

ultra flex silicon fuga

3-20 mm

TYPE CG2WA

COLOR

White

Page 13: maxicoll english catalog

MAXICER STANDARD ADHESIVE

Ceramics / Tile

Cement and mineral filler based on the product's performance and operation (application) that contains chemical additives to increase the duration of a single-component ceramic, tile adhesive mortar. Indoors, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and cement-based surfaces can be used easily. Minimum of 3% water absorption, is an ideal product for small and medium-sized coating materials.

The product shelf life, dry environment, the original package is 12 months. Appearance: Grey, White PowderPackaging: 25 kg kraft bagWater Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of waterConsumption:4.5-5 kg/m²

STANDARD ADHESIVE MAXICER

Ceramics / Tile

Cement and mineral filler based on the product's performance and operation (application) that contains chemical additives to increase the duration of a single-component ceramic, tile adhesive mortar. Indoors, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and cement-based surfaces can be used easily. Minimum of 3% water absorption, is an ideal product for small and medium-sized coating materials.

The product shelf life, dry environment, the original package is 12 months.Appearance : White Powder Packing : 25 kg \ 'health kraft bag £ 9:40 Water Mixture Rate: 25 kg of dust from 6.5 to 7.5 Push WaterConsumption : 4.5-5 kg /m²

MAXICER INDOOR FLEX GREY ADHESIVE

Ceramic / Tile / Granite

Cement, mineral filler and polymer based high adhesion strength, single component, flexible, ceramic, tile, granite, adhesive mortar that contains chemical additives to increase the open-time and the performance and reduce slippage of the product.Interior, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and cement-based substrates, the human density is more than shopping-business centers, hospitals, schools can be used in such places. Excellent adhesion to all surfaces.

The product shelf life, dry environment, the original package is 12 months.Appearance: Grey PowderPackaging: 25 kg kraft bagWater Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of waterConsumption:5-6 kg/m² (back of the big size tiles must be covered with mortar)

CONSTRUCTION CHEMICALS

STANDARD GRAY

CERAMIC - TILE

ADHESIVE

TYPE C1T

CONSTRUCTION CHEMICALS

STANDARD WHITE

CERAMIC - TILE

ADHESIVE

TYPE C1T

new

CONSTRUCTION CHEMICALS

FLEX INDOOR

CERAMIC - TILE- GRANITEREINFORCED POLYMER

ADHESIVEGrey Interior

TYPE C2TE

Page 14: maxicoll english catalog

MAXICER INDOOR FLEX WHITE ADHESIVE

Ceramic / Tile / Granite

Cement, mineral filler and polymer based high adhesion strength, single component, flexible, ceramic, tile, granite, adhesive mortar that contains chemical additives to increase the open-time and the performance and reduce slippage of the product.Interior, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and cement-based substrates, the human density is more than shopping-business centers, hospitals, schools can be used in such places. Excellent adhesion to all surfaces.

The product shelf life, dry environment, the original package is 12 months.Appearance: White PowderPackaging: 25 kg kraft bagWater Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of waterConsumption:5-6 kg/m²(back of the big size tiles must be covered with mortar)

MAXICER OUTDOOR FLEX GREY ADHESIVE

Ceramic / Tile / Granite / Porcelain

Cement, mineral filler and extra polymer based high adhesion strength, single component, flexible, ceramic, tile, granite, porcelain adhesive mortar that contains chemical additives to increase the open-time and the performance and reduces slippage of the product. Due to high thixotropic property of the last inserted resistance against slipping.Outdoor, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and cement-based surfaces exposed to heavy traffic floors, balconies, terraces, shops, sidewalks and squares can be used in coatings. Excellent adhesion to all surfaces.

The product shelf life, dry environment, the original package is 12 months.Appearance: Grey PowderPackaging: 25 kg kraft bagWater mixing ratio: Dust, 25 kg, 6.5 7.5 liter of waterConsumption:5-6 kg/m² (back of the big size tiles must be covered with mortar)

MAXICER OUTDOOR FLEX WHITE ADHESIVE

Ceramic/ Tile / Granite / Porcelain

Cement, mineral filler and extra polymer based high adhesion strength, single component, flexible, ceramic, tile, granite, porcelain adhesive mortar that contains chemical additives to increase the open-time and the performance and reduces slippage of the product. Due to high thixotropic property of the last inserted resistance against slipping.Outdoor, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and cement-based surfaces exposed to heavy traffic floors, balconies, terraces, shops, sidewalks and squares can be used in coatings. Excellent adhesion to all surfaces.

The product shelf life, dry environment, the original package is 12 months.Appearance: White PowderPackaging: 25 kg kraft bagWater Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of waterConsumption:5-6 kg/m² (back of the big size tiles must be covered with mortar)

CONSTRUCTION CHEMICALS

FLEX ADHESIVE

CERAMIC - TILE- GRANITEREINFORCED POLYMER

ADHESIVEGrey Interior White

TYPE C2TE

FLEX ADHESIVE

CERAMIC - TILE- GRANITEPORCELAIN

OUTDOOR

TYPE C2TE

EXTRAREINFORCED POLYMER

CONSTRUCTION CHEMICALS

FLEX ADHESIVE

CERAMIC - TILE- GRANITEPORCELAIN

Outdoor

TYPE C2TE

EXTRAREINFORCED POLYMER

CONSTRUCTION CHEMICALS

Page 15: maxicoll english catalog

MAXICER CELLULAR CONCRETE/BIMS BRICK KNITTING MORTAR

Cement, mineral filler and polymer based adhesion strength, single component, cellular concrete, porous stone brick, stone slabs, paving stones, bricks sticking to products, knitting mortar that contains chemical additives to increase the open-time and the performance of the product.Cellular concrete water-absorbing property such as interior and exterior structural elements of the weave with a high ideal. The application surface must be repaired with MaxicER Repair Mortar . The product shelf life, dry environment in original packaging is 6 months.

Appearance: Grey powderPackaging: 25 kg kraft bagWater Mixing Ratio: Dust, 25 kg, 6.5- 7.5 liter of waterConsumption: 6-8 kg / m² for the dimensions of 20x50x20 cellular concrete

MAXICER GLASS BRICK KNITTING MORTAR

Glass Brick / BTB / Glass Mosaic White White cement and mineral filler-based, polymer additive, single-component, paste, and plastering (for joints) mortar. Product performance and operation (application) contains chemical additives to increase the duration. Glass laying bricks glued on top of all the BTB and the types of glass mosaic and glue used to fill joints.

The product shelf life, dry environment in original packaging is 6 months.Appearance: White powderPackaging: 25 kg kraft bagWater Mixing Ratio: Dust, 25 kg, 6- 7 liter of waterComsumption:2 kg / m 2 to 8 mm in thickness of the joint

MAXICER THIN AND THICK REPAIR MORTAR

Repair Mortar

Cement and mineral filler based, fiber reinforced, polymer-reinforced, high-strength, one component repair mortar repair. -1 mm in thickness of the thin repair mortar for Grain, for thick repair mortar - 4 mm is. Interior and exterior, concrete, plaster, cement and so on. structure of the floors and walls for cracks, wear, and filling gaps, repair, reinforcement and strengthening of the weak and worn surfaces, as a result of erosion of reinforcement bars are used to repair damaged concrete. 3-20 mm in thickness for thin repair mortar, a thick repair mortar for the 5 - 40 mm. Very humid or very hot weather, making the application should be avoided as much as possible. The product shelf life, dry environment, the original package is 6 months.

Appearance: Grey Powder Packing: 25 kg kraft bags Water Mixing Ratio: Dust, 25 kg, 5- 5,5 liter of waterComsumption:1,6 kg/m² (for 1 mm thickness)

FLEX ADHESIVE

BONDING MORTAR KNITTING

GAS CONCRETE BRICK BIMS

REINFORCED POLYMER

CONSTRUCTION CHEMICALS

GLASS BRICKKNITTING MAXICER GLASS BRICK ADHESIVE MORTAR REINFORCED POLYMER

CONSTRUCTION CHEMICALS

new

REPAIR MORTARThin Mortar Repair

REINFORCED POLYMER

CONSTRUCTION CHEMICALS

Bag Price Thin/Grey

new new

REPAIR MORTARThick Mortar Repair

REINFORCED POLYMER

Bag Price Thin/Grey

Page 16: maxicoll english catalog

MAXICER SELF LEVELLING GROUT Cement and mineral filler based, fast setting, self-leveling, high-strength floor leveling mortar. All interior surfaces of buildings exposed to medium and heavy traffic in the last floor coating alum pre-leveling, as well as domestic fronts, ceramic, marble , tile, PVC, laminates, parquet floor before such applications are to fix. 60 minutes before administration of foot and mouth Maxicer surface must be primed with Primer Levelling Surface Bonding Enhancer. Medium-density surfaces, thickness 2-10 mm, 5-20 mm high-density surfaces .The product shelf life, dry environment in original packaging is 6 months.

Appearance: Grey Powder Packing: 25 kg kraft bags Water Mixing Ratio: Dust, 25 kg, 5- 5,5 liter of waterComsumption:1.5 kg/m² (for 1 mm thickness)

MAXICER MULTI-PURPOSE MORTAR ADDITIVE Styrene acrylic-based, cement and other fillers compatible , in liquid form ready for use dispersion. Together increases the strength of adhesion of the product is used. together with Maxicer İndoor Flex Adhesive, Maxicer Outdoor Flex Adhesives it is ideal for Ceramic over ceramic tiles , granite, porcelain bonding, ceramic over gypsum board bonding, fiber cement board over ceramic tiles, chipboard bonding, chipboard over ceramic applications, swimming pool and pool hull isolation .Maxicer Multi-purpose mortar additive is added to mortar 25 kg dust to 2,5-4 kg additive ratio . Consistency of the mortar is set with water. If you have absorbing properties of the surface (particularly gypsum board, fiber cement board substrates), using a brush to the surface Maxicer Multi-purpose mortar additive is applied in a single layer (650-750 g/m²). Then dispersed mortar applied to the surface.

The product shelf life, dry environment, the original packaging is 6 months. Appearance: White liquid Package: 20 - 10 and 5 kg plastic drums

MAXICER SURFACE LEVELLING PRIMERStyrene acrylic based adhesion promoter, cement and other fillers compatible with all of the liquid dispersion form, ready for use. Alum covered surfaces with the surface to increase adherence and hence better adhesion to the surface to ensure that the alum is applied. In addition, the surface water absorption property is removed, can also be applied before application of plaster.

The product shelf life, dry conditions, for 6 months in original packaging. Appearance: White Liquid Packaging: 20, 10 and 5 kg plastic drums Consumption: 0.2-0.3 kg / m² (application may vary according to surface conditions)

SELF LEVELLING GROUT

Floor Leveling Tool

CONSTRUCTION CHEMICALS

new

new new newMULTI-PURPOSE MORTAR ADDITIVE

CONSTRUCTION CHEMICALS

5 lt. Drum 10 lt. Drum 20 lt. Drum

CONSTRUCTION CHEMICALS

CONSTRUCTION CHEMICALS

new new

new

MULTI-PURPOSE CONTRIBUTION CHARGES

CONSTRUCTION CHEMICALS

SURFACE LEVELLING PRIMER

5 lt. Drum 10 lt. Drum 20 lt. Drum

MULTI-PURPOSE MORTAR ADDITIVE

MULTI-PURPOSE MORTAR ADDITIVE

CONSTRUCTION CHEMICALS

SURFACE LEVELLING PRIMER

CONSTRUCTION CHEMICALS

SURFACE LEVELLING PRIMER

Page 17: maxicoll english catalog

MAXICER 0-6 MM FUGA JOINT FILLER

White cement and fine mineral based joint filler that increase product performance, cracking, corrosion resistance to joint filler containing chemical additives. Resistant to cracking in joints between 0-6 mm, bending and compressive strength, suitable for bathrooms and kitchens, servants, ceramic, granite, marble floors are ideal. Wide range of colors available. After application the surface, can be opened for use after 24-48 hours.

The product shelf life, dry conditions, in original packaging 12 months. Appearance: White or colored a very fine-grained powder. Packaging: 20, 10, 5 kg kraft bags Consumption (see Table-1): 0-6 mm the theoretical Joint consumption tableWater Mixing Ratio: dust 20 kg 5,5-6 lt water

MAXICER 3-15 MM FLEX FUGA JOINT FILLER

White cement, fine mineral and extra polymer based joint filler that increase product performance, cracking, corrosion resistance to joint filler containing chemical additives. Water resistant. Resistant to cracking in joints between 3-15 mm, bending and compressive strength is high, suitable for bathrooms and kitchens, servants, shopping centers, ceramic, granite, marble floors are ideal. Wide range of colors available. After application the surface, can be opened for use after 24-48 hours.

The product shelf life, dry conditions, in original packaging 12 months. Appearance: White or colored a very fine-grained powder. Packaging: 20-10-5 kg kraft bags Consumption (see Table-2): 3-15 mm the theoretical Joint consumption tableWater Mixing Ratio: dust 20 kg 5 5-6 lt water

FUGA 0-6 mm

JOINT FILLERCeramic / Tile

CONSTRUCTION CHEMICALS

White

TYPE CG2WA

WhiteIvory/Beige/Grey

Fawn/Verification Beige/Dark Grey/Smoked

Weight Color

WhiteIvory/Beige/Grey

Fawn/Verification Beige/Dark Grey/Smoked

WhiteIvory/Beige/Grey

Fawn/Verification Beige/Dark Grey/Smoked

WhiteIvory/Beige/Grey

Fawn/Verification Beige/Dark Grey/Smoked

Weight Color

WhiteIvory/Beige/Grey

Fawn/Verification Beige/Dark Grey/Smoked

WhiteIvory/Beige/Grey

Fawn/Verification Beige/Dark Grey/SmokedFLEX FUGA 3-15 mm

JOINT FILLINGCeramic / Tile / Granite

CONSTRUCTION CHEMICALS

White

TYPE CG2WA

Page 18: maxicoll english catalog

TECH-USTA STANDARD GREY ADHESIVE

Ceramic / Tile

Cement and mineral filler based single-component ceramic, tile adhesive mortar. All kinds of concrete, plaster, alum can be used in cement based substrates. Minimum of 3% water absorption, is an ideal product for small and medium-sized tiles.

The product shelf life, dry environment, the original package is 12 months. Appearance: Grey, White PowderPackaging: 25 kg kraft bagWater Mixing Ratio: Dust, 25 kg, 6.5 - 7 liter of waterConsumption:4.5-5 kg/m²

TECH-USTA FLEX ADHESİVE

Ceramic / Tile

Cement and mineral filler based single-component ceramic, tile adhesive mortar that contains chemical additives to increase the open-time and the performance of the product.

Indoor and outdoor, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, alum can be used in cement-based substrates. Minimum of 3% water absorption, is an ideal product for small and medium-sized tiles.

The product shelf life, dry environment, the original package is 12 months. Appearance: Grey, White PowderPackaging: 25 kg kraft bagWater Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of waterConsumption:4.5-5.5 kg/m²

TECH-USTA HEAT INSULATION BOARD ADHESIVE EPS / XPS / ROCKWOOL / GLASS WOOL

Cement and mineral filler based, polymer-reinforced, heat insulation board adhesive .All kinds of internal and external fronts in order to provide thermal insulation EPS, XPS, stone wool, glass wool as thermal insulation panels used for bonding. Each kind of plaster, concrete, bricks, cellular concrete, pumice, brick, brick and so on. structural elements can be applied over. The product shelf life, dry environment, the original package is 12 months. Appearance: Grey Powder Packing: 25 kg kraft bags Water Mixing Ratio: Dust, 25 kg, 6- 6,5 liter of waterComsumption:4-4.5 kg/m² (it can be changed according to surface properties)

CONSTRUCTION CHEMICALS

TYPE C1T

GRAYADHESIVE

CERAMIC / TILE

CONSTRUCTION CHEMICALS

WHITEADHESIVE

CERAMIC / TILE

TYPE C1T

Bag Price Grey Bag Price White

CONSTRUCTION CHEMICALS

HEAT INSULATION ADHESIVE SHEET

EPS, XPS, ROCKWOOLFOR GLASS WOOL

WRAPPING PLASTERDOPED FIBER

CONSTRUCTION CHEMICALS

TYPE C1TE

FLEX GRAYADHESIVE

CERAMIC / TILE

CONSTRUCTION CHEMICALS

FLEX WHITEADHESIVE

CERAMIC / TILE

TYPE C1TE

Bag Price Grey Bag Price White

Bag Price Grey

Page 19: maxicoll english catalog

TECH-USTA HEAT INSULATION BOARD PLASTER EPS / XPS / ROCK WOOL / GLASS WOOL

Cement and mineral filler based, fiber reinforced, polymer-reinforced heat insulation board plaster. interior and exterior EPS, XPS, Rock Wool, Glass Wool Heat insulation panels, such as plaster is applied for two floor on the surface. before first floor plaster dries, file is applicated on the plaster. For the second floor application must be wait for 3-4 hours.

The product shelf life, dry environment, the original package is 12 months. Appearance: Grey Powder Packing: 25 kg kraft bags Water Mixing Ratio: Dust, 25 kg, 6- 6,5 liter of waterComsumption:4-4.5 kg/m² (it can be changed according to surface properties)

TECH-USTA THIN PLASTER

Based cement and mineral filler, polymer additives, plaster can be applied easily. Interior and exterior, wall and ceiling, concrete surfaces ready to paint as the last layer of plaster is used. Each layer of 3-5 mm thickness of the application must be about to plaster.

Of the product shelf life, dry environment, the original package is 12 months. Appearance: Grey Powder Packing: 25 kg kraft bags Water Mixing Ratio: Dust, 25 kg, 7-9 liter of waterComsumption:1,4-1,6 kg/m² (for 1 mm thickness)

TECH USTA MACHINE PLASTER

Based cement and mineral filler, chemical binding machine reinforced plaster. Because of the chemical additives found inside, no air entrains , creates ease of application. Internal and external fronts, brick, aerated concrete, brick wall, pumice, concrete, the ceiling is applied to surfaces such as machine.

The product shelf life, dry environment, the original package is 12 months.Appearance: Grey, White Powder Packing: 25 kg kraft bags Water Mixing Ratio: Dust, 25 kg, 4,5-5 liter of waterComsumption: 12,5 kg/m²

CONSTRUCTION CHEMICALS

HEAT INSULATION PLASTER PLATE

EPS, XPS, ROCKWOOLFOR GLASS WOOL

WRAPPING PLASTERDOPED FIBER

CONSTRUCTION CHEMICALS

THIN PLASTER

new

new new

CONSTRUCTION CHEMICALS

MACHINEPLASTER

GREY

Bag Grey

CONSTRUCTION CHEMICALS

MACHINEPLASTER

WHITE

Bag White

Page 20: maxicoll english catalog

TECH-USTA 0-6 MM FUGA JOINT FILLER

White cement and fine mineral based joint filler that resistant to cracking in joints between 0-6 mm, suitable for bathrooms and kitchens, servants, ceramic, granite, marble floors are ideal. Wide range of colors available. After application the surface, can be opened for use after 24-48 hours.

The product shelf life, dry conditions, in original packaging 12 months. Appearance: White or colored a very fine-grained powder. Packaging: 20 kg kraft bags Consumption (see Table-1): 0-6 mm the theoretical Joint consumption tableWater Mixing Ratio: dust 20 kg , 5,5-6 lt water

TECH-USTA 3-15 MM FLEX FUGA JOINT FILLER

White cement, fine mineral and polymer based joint filler that increase product performance, cracking, corrosion resistance to joint filler containing chemical additives. Resistant to cracking in joints between 3-15 mm, suitable for bathrooms and kitchens, servants, ceramic, granite, marble floors are ideal. Wide range of colors available. After application the surface, can be opened for use after 24-48 hours.

The product shelf life, dry conditions, in original packaging 12 months. Appearance: White or colored a very fine-grained powder. Packaging: 20 kg kraft bags Consumption (see Table-2): 3-15 mm the theoretical Joint consumption tableWater Mixing Ratio: dust 20 kg ,5,5-6 lt water

CONSTRUCTION CHEMICALS

FUGA 0-6 mmJOINT FILLER

CERAMIC / TILE

TYPE CG1

Weight Color

WhiteIvory/Beige/Grey

Fawn/Verification Beige/Dark Grey/Smoked

CONSTRUCTION CHEMICALS

FLEX FUGA 3-15 mmJOINT FILLER

CERAMIC / TILE / GRANITE

TYPE CG2

Weight Color

WhiteIvory/Beige/Grey

Fawn/Verification Beige/Dark Grey/Smoked

Page 21: maxicoll english catalog

Joint Filler Colors

White Grey Dark Grey Smoked Smoky

Black Ivory Beige Light Beige Fawn

Brown Cinnamon Yellow Orange Pink

Purple Lila Ice Blue Pistachio Green Green

THEORETICAL JOINT CONSUMPTION TABLES

Table-1

Ceramic Size

Table-2

Ceramic Size

Table-3

Ceramic Size

Page 22: maxicoll english catalog
Page 23: maxicoll english catalog

CONSTRUCTION CHEMICALS

Central (Factory)

(Manufacturing Plant)(Manufacturing Plant)

Phn:Phn:

Phn:


Recommended