www.gaf.com

Updated: 6/11

Maximizing Your Roofing Investment Brochure

Understand

Step1

... And Eliminate Hassles!

Four Steps to MaxiMizingYour roofing

investMent

Select

Step2

Install

Step3

Ma intain

Step4

Today, even seemingly simple choices can be complicated. So when you’re faced with a decision that requires a major expense or even capital investment, how can you be sure you have the information you need to make the right decision?

This is especially true with roofing, because a bad decision can result in:- premature roof replacement - unbudgeted repair expense - aggravated or injured occupants - and even lawsuits!

Not surprisingly, roofing represents less than 4% of a typical building’s cost, but the majority of construction litigation! With these kinds of risks, making the right roofing choices are critical. But how to go about it?

GAF’s four-step process can help you make the right decisions about your roofing project, and can dramatically increase the chances of its long-term financial success.

A Bad Roofing Decision

Can Be Costly...

Don’t Let It Happen To You!

“...roofing represents less than 4% of a typical building’s cost, but the majority of construction litigation!”

Roofing system selection cannot be made without a thorough understanding of the property and its use. Key factors to consider include:

• Investment Objectives…

- Expected length of property ownership - Desired term of performance for the roof - Availability and cost of capital - Lifecycle cost considerations

• Property Use… - Frequency and type of roof traffic - Importance of roof aesthetics - Type and quantity of rooftop equipment - Facility use

• Property Location… - Geographic location (e.g., coastal, inland, etc.) - Climatic and environmental conditions - Rooftop accessibility - Local building codes and restrictions

• Building Construction… - Overall construction (wood, masonry, etc.) - Type of roof deck - Condition of existing roofing system

(if re-roofing)

Regrettably, too many roofing decisions are made without a thorough understanding of these and other relevant factors—or their impact—resulting in sub-optimal performance of the roofing system.

Remember, as you progress in your decision process, consulting an architect or roof consultant who is familiar with design will help assure that key issues like local code compliance are properly addressed.

Property Use: Is the roof used as a terrace for entertaining or only accessed twice a year for seasonal maintenance?

Investment Considerations: Do you plan on owning this property for the long term—or will it be sold in the near future?

Property Location: Is your property located on the coast of Florida where it’s subjected to hurricane force winds—or is it in downtown Chicago where roof access may be limited?

Building Construction: What type of construction is your building? What type of roof deck does it have? Does the roof need to be insulated? Or is it an unheated warehouse?

1Step Understand...

- Insulation needs

Select...2Step

Every property is unique and has its own set of roofing needs. Customizing a roofing system that best matches those needs is one of the keys to a financially successful roofing project.

Unlike companies that have a vested interest in a particular roofing technology, our goal is to help you select the best technology for your specific application. Regardless of the technology chosen, today’s energy-conscious environment demands that Energy Star® qualification and Cool Roof Rating Council (CRRC) listing be considered in roof selection—particularly in the southern United States.

For those who are less familiar with roofing system selection, proprietary Roof Advisor™ Software can help identify the best options for your project.

EnergyGuard™ Insulation

Drill-Tec™ Fasteners

Weather Stopper®

Integrated LoW-SLope roofIng SyStem™

•

•• Helps reduce heat

loss and saves energy

• Provides clean, even surface for quality installation

• Drill-Tec™ (and other GAF-approved fastening systems) are important for wind resistance and code approvals

• Choice of fastening system will vary based on deck type and required code approvals

“...our goal is to help you select the best technology for your specific application.”

Roofing Membranes

Integrating Components

Weather Stopper®

“ Integrated components for maximum watertight protection”Integrated LoW-SLope roofIng SyStem™

•

•

• Built-Up... multiple, redundant layers of asphaltic roofing ply felts

• Modified Bitumen... one or more layers of modified asphaltic roofing membranes

• Single Ply... single layer of thermoplastic membrane

• Composite... combination of BUR, modified bitumen, and/or single ply

• Roof restoration... liquid-applied roofing mem-brane for restoring existing roofs or coating new roofs for superior waterproofing

The keys to the long-term waterproof integrity of any roof are the Integrating Components used at flashings and penetrations. They provide critical protection for these vulnerable areas: • Wall Flashings • Penetrations (roof vents,

drains, expansion joints, skylights, etc.)

• Equipment (HVAC units, TV antennae, satellite dishes, etc.)

System Guarantees • Manufacturer’s guarantees are critical for

limiting your long-term roof repair expenses.• Best protection includes coverage for both

material defects and workmanship errors.• As a requirement of guarantee issuance,

GAF performs both a final and a 2-year inspection to insure quality.

• GAF’s Diamond Pledge™ no-dollar-limit (NDL) guarantee covers all parts of the Weather Stopper® Integrated Low-Slope Roofing System. It provides the most extensive coverage in the industry, even including some systems with coverage against blisters, damage from ponding water, and addendum coverage available for field fabricated metal. (See guarantee for complete coverage and restrictions.) All components must be provided by GAF to qualify for the guarantee.

Install & Inspect...

Roof system complexity has increased and new roofing technologies have made proper installation and inspection even more critical for reliable, long-term performance. As a result, choosing the right installer has become an even more essential element of a successful project. • Certified Installers: Only certified contractors

have access to the long-term guarantees offered by manufacturers. GAF’s certified contractors have been selected based on:

- their standing in their community - their reputation for providing outstanding

roofing service Only the top 4% of roofing contractors in the

country qualify for this status. Choosing a certified contractor assures you that your roof will be installed by a company that is most familiar with GAF’s products and installation methods—and is your best and safest choice.

• Qualified Field Services Representatives: These inspectors can help prevent problems before they happen. GAF’s NDL-guaranteed roofs are inspected by a Field Services Representative from the GAF Field Services Team. These representatives are seasoned technical professionals whose only function is to inspect roofs and to provide technical training and support to GAF’s certified contractors.

3Step

“Only the top 4% of roofing contractors in the country qualify for GAF’s Certified Contractor Program”

Step

The single best way to extend the life of your roof is to perform regular inspections and maintenance. Every reputable roofing manufacturer requires regular inspection and maintenance to maintain guarantee coverage. Regular inspections can also prevent costly problems from causes that are not covered by manufacturers’ guarantees, like damage from vandalism, damage done by other contractors on the roof, or structural deterioration.

The best one to maintain your roof is a professional, certified roofing contractor, who has the knowledge, experience, and training to spot and correct potential problems before they happen. Savvy property owners realize that a comprehensive maintenance program will save them many times over during the life of their roofing system.

GAF is so committed to proper maintenance that we’ll extend the length of your Diamond Pledge™ guarantee by a full 25% for FREE if you perform regular inspection and maintenance. Ask your GAF Certified Contractor or GAF Territory Manager for details.

Maintain...Green Roof Central - Learn about the leading energy-saving roofing options that can reduce your operating expenses and extend roof life. Available free at www.gaf.com. Architectural Information Services - Architects and specifiers (or property owners with in-house design departments) can access an entire team devoted to the specification process. Available free by calling 1-800-522-9224.

Diamond Pledge™ Guarantee - The industry’s premier roof guarantee with true “edge-to-edge”coverage. Includes coverage for the entire Weather Stopper® Integrated Low Slope Roofing System™. And unlike conventional guarantees, some systems are even covered for ponding water, blistering, field-fabricated metal, and much more (see guarantee for details). Well Roof ™ Advantage - The single best way to extend the life of your roof is to perform regular inspection and maintenance. GAF believes so strongly in this practice that it offers its unique Well Roof Advantage program: a 25% extension of the length of your Diamond Pledge™ Guarantee—FREE—when you invest in a regular maintenance and inspection plan!*

All-American Pledge™ Guarantee - Many commercial properties have both low-slope and shingle roofs. The All-American Pledge is the only no-dollar-limit guarantee that gives you cover-age for both roofs—for single-source accountability. Certified Contractors - GAF selects only the top 4% of roofing contractors for membership in its factory-certified contractor program. GAF’s workmanship guarantees are available only through this exclusive group. Field Services - Some roofing manufacturers allow their sales representatives to do the final technical inspection of your finished roof system. GAF, through our Field Services Team, uses only experienced technical representatives for these inspections—for your protection!

*25% extension applies to published specifications only

Use these helpful tools to make your next roofing project a success!

4

©2011 GAF 6/11 #564 • 1361 Alps Road • Wayne, NJ 07470 COMGN215

Quality You Can Trust. . . from North America’s Largest Roofing ManufacturerFor complete, up-to-date specifications and information, visit www.gaf.com

East Sales Office: (856) 241-0241

Central Sales Office: (630) 296-1980

Southeast Sales Office: (813) 829-8880

Southwest Sales Office: (972) 851-0500

West Sales Office: (951) 360-4200

TPO/PVCT-FA-N-I-45FBP-MA-N-I-60FBTriPosite™XLT-SA-N-I-45RS/HWT-SA-N-I-60RS/HW

SBS ModifiedI-1-2-MGPFR

EnergyGuard™ ISO, Stratavent® Eliminator™ Base Sheet

EnergyGuard™ Ultra ISO, Stratavent® Eliminator™ Base Sheet

EnergyGuard™Ultra ISO, Stratavent® Eliminator™ Base Sheet

Topcoat® Elastomeric Roofing Membrane, Topcoat® MB Plus

EnergyGuard™ Ultra ISO, Freedom™ TPO

EnergyGuard™ ISO, Ruberoid® EnergyCap™ Torch Granule Plus FR

EnergyGuard™ Ultra ISO, Fleece-backed TPO or PVC

EnergyGuard™ ISO, Liberty™ SA Base Sheet

SBS Modified CompositeI-3-1-MGPFR

SBS Self-Adhered CompositeI-0-2-SA/HGPFR

APP Modified I-1-2-TGPFREC

BUR Gravel SurfacedI-B-5-G/P6

Topcoat® Restoration Systems

Examples of GAF Roof Types & System Specification(s)

Special Featured Component(s)

*With TOPCOAT® MB Plus coating †With Dens-Deck® Roof Board or SecureRock® Roof Board

Resisting Saving Resisting Resisting Resisting Resisting Mold Energy Impact† Wind Fire Traffic†

Mold, Energy, Impact, Wind, Fire, Traffic:GAF Roofing Systems can solve your toughest roofing challenges!

• •* • • • •• •* • • • •• •* • • • •• • • • • •• • • • •

•* •• • • • • •• • • • • •