MAXIMO MXH Heated FormworkThe cost-effective solution for concreting operations at low temperatures
Product brochure
MAXIMO MXH Heated FormworkThe cost-effective solution for concreting operationsat low temperatures
Especially for markets with colder climates, PERI has developed the MXH Formwork System which can be heated whereby the MAXIMO Wall Formwork System is combined with heating elements. This means that concreting operations can also take place at low temperatures as the hydration process is not affec-ted.
Assembly of the panel formwork and heating elements is carried out hori-zontally; only two mounting bolts are required on the four frame corners
each time. The standard height of the heating elements is 2.70 m with stand-ard widths of 2.40 m and 1.20 m. Corresponding extension elements and practical details such as suitable box outs for the BFD Couplers as well as for connecting the bracket system MXK ensure efficient application of the system. MAXIMO thus provides a further enhanced range of applications in the area of panel formwork with sin-gle-sided operations. The numerous reference customers along with independent time measurements confirm the formwork´s exceptional level of efficiency.
Quickly mountedEasily fixed using only 2 screws in eachof the 4 panel corners
Particularly cost-effectiveSummer and winter utilization with only one formwork system
With innovative tie technologyCan be used with the MX 15 as well asMX 18 anchor systems
Product advantages
2
Panel overview
Product advantages
Combined with a heating element, MAXIMO now also offers the right solu-tion for concreting at low temperatures. By means of the heating control, the set point value can be adjusted from + 20 °C to + 80 °C.
Installation bracket*
Attachment point for Scaffold bracket MXK*
Attachment point for Control box and Tie holder*
Tie point
Attachment point for Ladder strut*
Attachment point for Connector RS MXH*
Notch for electrical connection
Lifting point crane eye
Attachment point for Alignment coupler BFD
Attachment point for Compensation Waler MAR*
*Not available on panels
3
Panel sizes
Standard Heated Panels MXH 270 cm x 240 cm270 cm x 120 cm
Extension Heated Panels MXH
120 cm x 240 cm120 cm x 120 cm 60 cm x 240 cm 60 cm x 120 cm
MXH Heated Formwork
4
Item no. Weight kg
129370 119.000 Extension Heated Panel MXH 120 x 2402.880 m². Extension Heated Panel MXH for Panel MX 120 x 240.
540 1320 540
2400
600
600
1200
199
129133 147.000 Heated Panel MXH 270 x 1203.240 m². Heated Panel for Panel MX 270 x 120.
600 600
1200
600
1500
600
2700
221100
129132 233.000 Heated Panel MXH 270 x 2406.480 m². Heated Panel for Panel MX 270 x 240.
540 1320 540
2400
600
1500
2700
221
600
100
MXH Heated Formwork
5
Item no. Weight kg
129139 3.440 Adapter Connector MXH
150
150 186
117990 0.132 Fixing Bolt M14 MXH
93
M 14
129135 44.000 Extension Heated Panel MXH 60 x 1200.720 m². Extension Heated Panel MXH for Panel MX 120 x 60.
300
300 60
0
600600
1200
199
129134 72.400 Extension Heated Panel MXH 60 x 2401.440 m². Extension Heated Panel MXH for Panel MX 60 x 240.
540 1320 540
2400
300
300 60
0
199
129375 73.400 Extension Heated Panel MXH 120 x 1201.440 m². Extension Heated Panel MXH for Panel MX 120 x 120.
600
600
600 600
1200
1200
199
MXH Heated Formwork
6
Item no. Weight kg
128875 0.450 Connecting Cable MXHPower supply cable for connection between MXH Panels and MXH Extension Heated Panels.
128874 0.755 Connector Cable MXHPower supply cable for Control Box MXH to MXH Panel.
129330 19.100 Control Box MXH Complete with1 pc. 129137 Control Box Connector MXHNoteFollow Instructions for Use!
947
483 283
129137 5.590AccessoriesControl Box Connector MXH
129136 3.260 Connector RS MXHFor connecting push-pull props and kicker braces on MXH Panels.
126
233
211
MXH Heated Formwork
7
Item no. Weight kg
117466 10.600 Push-Pull Prop RS 210, galv.Extension length l = 1.30 – 2.10 m.For aligning PERI formwork systems and precast concrete elements.
NotePermissible load see PERI Design Tables.
1300min max 2100
Ø21
1178
60,6
Ø
9
Ø17
Ø48,3
115168 7.470 Lifting Hook MAXIMO 1.5 tFor transporting MAXIMO and TRIO Panels.
NoteFollow Instructions for Use!Technical DataPermissible load-bearing capacity:Steel elements 1.5 tAlu elements 750 kg
60 110
218
110
332
58
185
117321 31.000 Lifting Gear Combi MXFor transporting stacks of MAXIMO and TRIOPanels. For attaching Lifting Hook MAXIMO 1.5 t and Stacking Device MAXIMO.
NoteFollow Instructions for Use!
.
129141 8.430 Tie Holder MXHParking position of MX Anchors on MXH Panels.
947
1050 256
MXH Heated Formwork
8
Item no. Weight kg
117469 40.000 Push-Pull Prop RS 650, galv.Extension length l = 4.30 – 6.50 m.For aligning PERI formwork systems and precast concrete elements.
NotePermissible load see PERI Design Tables.
4300min max 6500
88,9
Ø4140
Ø21
Ø48,3
Ø17
117468 23.000 Push-Pull Prop RS 450, galv.Extension length l = 2.80 – 4.50 m.For aligning PERI formwork systems and precast concrete elements.
NotePermissible load see PERI Design Tables.
min 2800 max 4500
2670
73ØØ21
Ø48,3
Ø17
9
117467 15.500 Push-Pull Prop RS 300, galv.Extension length l = 1.90 – 3.00 m.For aligning PERI formwork systems and precast concrete elements.
NotePermissible load see PERI Design Tables.
min 1900 max 3000
1773
64,5
Ø
Ø21
Ø48,3
9
Ø17
118238 12.200 Push-Pull Prop RS 260, galv.Extension length l = 2.30 – 2.60 m.For aligning PERI formwork systems and precast concrete elements.
NotePermissible load see PERI Design Tables.
min 2300 max 2600
60,6
Ø2178
Ø21
9
Ø17
Ø48,3
MXH Heated Formwork
9
Item no. Weight kg
117343 3.250 Base Plate-2 for RS 210 – 1400, galv.For assembly of Push-Pull Props RS 210, 260, 300, 450, 650, 1000 and 1400.
Complete with2 pc. 105400 Pin Ø 20 x 140, galv.2 pc. 018060 Cotter Pin 4/1, galv.
261
106
52
64
Ø21
124777 0.210AccessoriesAnchor Bolt PERI 14/20 x 130
103800 271.000 Push-Pull Prop RS 1400, galv.Extension length l = 6.40 – 14.00 m.For aligning PERI formwork systems.
NotePermissible load see PERI Design Tables. Chain can be operated from bottom.
6400min max 14000
6290
400020 x 200 = 400020 x 200 =
Ø48,3
Ø21 Ø21Ø17
Ø48,3
10
028990 115.000 Push-Pull Prop RS 1000, galv.Extension length l = 6.40 – 10.00 m.For aligning PERI formwork systems.
NotePermissible load see PERI Design Tables.
min 6325 max 10000
10
102
Ø
Ø21
Ø48,3
Ø21
Ø17
MXH Heated Formwork
10
Item no. Weight kg
028020 22.000 Push-Pull Prop RSS IIExtension length l = 2.91 – 3.80 m.For aligning PERI formwork systems.
NotePermissible load see PERI Design Tables.
min 2910 max 3800
Ø16,5Ø16,52775
Ø32
10
70Ø
15
113397 1.600 Spindle Handle RSS / AVSpindle Handle for screwing on Push-Pull-Props RSS I, RSS II, RSS III and Kickers AV 210 and AV 190 complete with 2 bolts and nuts M8.
196
179
130
028010 17.900 Push-Pull Prop RSS IExtension length l = 2.05 – 2.94 m.For aligning PERI formwork systems.
NotePermissible load see PERI Design Tables.
2050min max 2940
1915
Ø16,5
10
Ø32
70Ø
126666 3.070 Base Plate-3 for RS 210 - 1400For assembly of Push-Pull Props RS 210, 260, 300, 450, 650, 1000 and 1400.
Complete with2 pc. 105400 Pin Ø 20 x 140, galv.2 pc. 018060 Cotter Pin 4/1, galv.1 pc. 113063 Bolt ISO 4014 M12 x 80-8.8, galv.1 pc. 113064 Hex Nut ISO7042-M12-8-G, galv.
264
64
52
105
Ø21
124777 0.210AccessoriesAnchor Bolt PERI 14/20 x 130
MXH Heated Formwork
11
Item no. Weight kg
057087057088
3.720 4.410
Kicker AVKicker AV 82Kicker AV 111For aligning PERI formwork systems.
min. L max. L 500 820 790 1110 Complete with1 pc. 027170 Pin Ø 16 x 42, galv.1 pc. 018060 Cotter Pin 4/1, galv.NotePermissible load see PERI Design Tables.
min 790 max 1110min 500 max 820
38Ø
390
10 10
Ø16,5
Ø30
Ø16x42
690
106000 1.820 Base Plate-2 for RSS, galv.For assembly of RSS Push-Pull Props.
Complete with1 pc. 027170 Pin Ø 16 x 42, galv.1 pc. 018060 Cotter Pin 4/1, galv.
150
Ø21
Ø11
100 1285
124777 0.210AccessoriesAnchor Bolt PERI 14/20 x 130
028030 38.400 Push-Pull Prop RSS IIIExtension length l = 4.60 – 6.00 m.For aligning PERI formwork systems.
NotePermissible load see PERI Design Tables.
min 4600 max 6000
4399Ø16,5 Ø16,5
Ø48,3
915
82,5
Ø
MXH Heated Formwork
12
Item no. Weight kg
028120 17.000 Kicker AV RSS IIIExtension length l = 2.03 – 2.92 m.For aligning PERI formwork systems.
Complete with1 pc. 027170 Pin Ø 16 x 42, galv.1 pc. 018060 Cotter Pin 4/1, galv.NotePermissible load see PERI Design Tables.
min 2030 max 2920
1915Ø16x42 Ø16,5
Ø32
10 10
70Ø
108135 12.900 Kicker AV 210Extension length l = 1.28 – 2.10 m.For aligning PERI formwork systems.
Complete with1 pc. 027170 Pin Ø 16 x 42, galv.1 pc. 018060 Cotter Pin 4/1, galv.NotePermissible load see PERI Design Tables.
min 1280 max 2100
Ø16x42 Ø16,5
Ø36
70Ø
1171
1010
028110 5.180 Kicker AV 140Extension length l = 1.08 – 1.40 m.For aligning PERI formwork systems.
Complete with1 pc. 027170 Pin Ø 16 x 42, galv.1 pc. 018060 Cotter Pin 4/1, galv.NotePermissible load see PERI Design Tables.
min 1080 max 1400
38Ø Ø16x42Ø16,5
Ø30
980
10 10
MXH Heated Formwork
13
Item no. Weight kg124777 0.210 Anchor Bolt PERI 14/20 x 130
For temporary fixation to reinforced concrete structures.
NoteSee PERI data sheet!Drilling Ø 14 mm.
130
SW 24Ø14
DE
en 0
4 | 2
016
3sm
793
982
© P
ER
I Gm
bH
The optimal System for every Project and every Requirement
PERI GmbHFormwork Scaffolding EngineeringRudolf-Diesel-Strasse 1989264 WeissenhornGermanyTel. +49 (0)7309.950- 0Fax +49 (0)7309.951- [email protected]
System-Independent Accessories
Column FormworkWall Formwork Slab Formwork
Climbing Systems Bridge Formwork Tunnel Formwork Shoring Systems
Construction Scaffold Industrial ScaffoldFacade Scaffold Access
Protection Scaffold Safety Systems Services
Important NotesWithout exception, all current safety regulations and guidelines must be observed in those countries where our products are used. The photos shown in this brochure feature construction sites in progress. For this reason, safety and anchor details in particular cannot always be considered as conclusive or final. The information contained herein is subject to tech-nical changes in the interests of progress. Errors and typographical mistakes reserved.