1
Maximum performance and durabilityTCE 443x-24 / 447x
2 3
For all wheel sizes and high volumes workshopsBig space for wheel seating, outside clamping 24"/28", wheel width up to 12,5/15" without any special accessories
Time saverThe redesigned jaws protectors allow steel rims internal clamping without time-consumingconversion
SpeedyThe two-speed turntable is easily operated using a pedal
Within reachControl switches are placed to be accessible from any working area
NeW TCe 330*Helper arm device ergonomic and flexible
extreme precisionThe horizontal arm and the follower arm allow a precise and smooth control in the whole process – 5500 N and 2500 N
Full control, maximum reliabilityThe control by using the lever gives the operator a maximum of sensitivity and protects the rim
ergo control* (patent pending) – saving time with more comfort and safetyThe new hand bead breaker system allows to execute the operation always in an ergonomic working position
Ergonomic and easy to use for maximum performance
Without any efforts*Pneumatic locking of the mounting head and movement of the TLL 130 allows to perfectly follow the rim profile making easier the access of the tools and allowing perfect bead extraction.
*Available only for specific models
WDK approved*Certified for RunFlat and UHP-tyres
TCE 443x-24 / 447xMaximum performance and durability
TCE 4470 S441
Bosch TCE 4430-24/4435-24 and TCE 4470/4475 tilt-back tyre changers provide a range
of innovative features designed for maximum speed, performance and durability – even
for the toughest UHP or RFT passenger car and light commercial tyres. With the addition of
a special accessory kit, these machines can also handle motorcycle tyres. Bosch TCE330,
the new helper arm device is especially designed for tyre specialists and high volume
workshops. Both tyre changers can also be equipped with the lift TSL 230 which allows
you to work always in an ergonomic position.
Key features
Big space for wheel seating – outside clamping 24/28 inch and wheel width up to 12,5/15 inch without any special pre-adjustment
Revolutionary Ergo Control bead breaker makes the operation safe, quick, precise and comfortable
TCE 330, helper arm with two independent pressing points
TSL 230 lift as accessory with integrated roller board
TCE 4435-24
4 5
Your choice – your requirements: TLL 130, IT and Ergo Control
TCE 330, TSL 230, G-Frame and two drive motors
TLL 130 – tyre leverless systemMovement of the TLL 130 allows to perfectly follow the rim profile making easier the access of the tools and allowing perfect bead extraction. The hexagonal vertical arm allows less flexion ensuring the best results. The upgraded TLL 130 with it`s new surface treatment is approved from WDK and BMW.
IT – inflation technology Tyre inflation and blast of air are controlled by pedal Tyre inflation assistance system through the jaws, which thanks to the new
design, guarantees higher air jet power Tyre inflation system is controlled by a side pedal and is up to 25 % faster
than similar devices.
ergo Control (patent pending) system: a revolution in tyre changingThey can be equipped with the NEW Ergo Control: the bead breaker is controlled by the handle rather than a pedal making the bead breaking operation safe, quick, precise and comfortable.
Ergonomic working position – the back is less stressed with respect to the traditional system, just stand in front of the wheel.
Increased safety – the use of the main bead breaker lever (patented) avoids shock to the operators arm making bead breaking a safe operation.
Maximum control – the control by using the lever gives the operator a maximum of sensitivity.
Increased speed – the bead breaker can be stopped immediately the bead is unseated - no need to fully open or close the blade.
Less cost – reduction of air consumption.
TLL 130 – tyre leverless system
IT – inflation technology Ergo Control (patent pending) TCE 330 – helper arm device G-Frame TSL 230 – Lift
TCe 330 – helper arm device: ergonomic and flexibleThe TCE 330 is a pneumatic device featuring two separately controlled arms which simplify mounting and demounting of UHP and RFT tyres. TCE 330 is designed to offer a great user experience, control switches are placed to be accessible from any working area and together with the higher positioning of the follower arm facilitate all operations on the tyre bead.
TSL 230 – simple and easy to useAll new tyre changer platforms can be upgraded with the TSL 230 which allows the operator to always work in an ergonomic position. The TSL 230 is mounted on the right side of the machine next to the bead breaker which allows for improved productivity. The lift is also equipped with an integrated roller board which leads to an easier and faster bead breaking operation.
G-Frame: durable and functional designAt the heart of the new tyre changers is the unique Bosch G-Frame concept. This advanced design feature increases the rigidity of the machine to shorten the flow of internal forces and providing superior control handling tyre and rim. It also improves the speed of the tyre change.
Innovation and user-friendlinessThe two-speed turntable is easily operated using a pedal. In the 230 V version, a special electronic system automatically ensures higher torque and a smooth start. The revised design of the turntable makes it easier to clamp the rim. The redesigned jaw protectors allow internal clamping of steel rims without time-consuming conversion. The integrated tyre inflation system is controlled by a side pedal.
6 7
Accessory programto improve your work
Advantages and some more information
Order Nr. / Description
1 695 108 055 Pressing point
1 695 102 148Jaws plastic protection kit (4 pcs.)
1 695 101 608 Demounting head tongue protection (5 pcs.)
1 695 106 152 Bead breaker plastic protection
1 695 102 584 Storage kit
1 695 105 191 Plastic rim protection
1 695 103 060 Kit WDK for run flat and ultra high performances tyres
Order Nr. / Description
1 695 107 467 TSL 230
1 695 101 575 Motorbike / scooter adaptors
1 695 103 210 Motorbike mounting head kit
1 695 101 518Bead breaking bearing motorbike wheel
1 695 103 211 Plastic mounting / demounting head complete with adaptor
1 695 103 216 Bead pressing device (thick)
1 695 101 372 External IT kit (4470 models only)
Mod
elle
TCE
443x
-24
IT d
evic
e
Ergo
Con
trol
TLL
130
WDK
kit
RAL
6018
RAL
7016
230
V 1
ph
400
V 3
ph
TCE 4430-24 S121 • • • • •TCE 4430-24 S40 • • • •TCE 4430-24 S401 • • • • •TCE 4430-24 S421 • • • • •TCE 4430-24 S43 • • •TCE 4430-24 S431 • • • •TCE 4430-24 S44 • • •TCE 4430-24 S441 • • • •TCE 4430-24 S47 • • • •TCE 4430-24 S471 • • • • •TCE 4435-24 S121 • • • • • •TCE 4435-24 S421 • • • • • •TCE 4435-24 S43 • • • •TCE 4435-24 S431 • • • • •TCE 4435-24 S44 • • • •TCE 4435-24 S441 • • • • •
Mod
els
TCE
447x
IT d
evic
e
Ergo
Con
trol
TLL
130
WDK
kit
RAL
6018
RAL
7016
230
V 1
ph
400
V 3
ph
TCE 4470 S121 • • • • •TCE 4470 S40 • • • •TCE 4470 S401 • • • • •TCE 4470 S421 • • • • •TCE 4470 S43 • • •TCE 4470 S431 • • • •TCE 4470 S44 • • •TCE 4470 S441 • • • •TCE 4470 S47 • • • •TCE 4470 S471 • • • • •TCE 4475 S121 • • • • • •TCE 4475 S43 • • • •TCE 4475 S431 • • • • •TCE 4475 S44 • • • •TCE 4475 S441 • • • • •
Technical data TCe 443x-24 TCe 447x
Power supply400 V 3 ph 50 Hz230 V 1 ph 50/60 Hz
400 V 3 ph 50 Hz230 V 1 ph 50/60 Hz
Rim diameter – external clamping 10" – 24" 12" – 28"
Rim diameter – internal clamping 12" – 28" 13" – 32"
Rim width3" – 12,5"4" – 15" (with TLL)
3" – 15"4" – 15" (with TLL)
Max. wheel diameter 1200 mm 1200 mm
Air pressure 8 – 10 bar 8 – 10 bar
Rotational speed of the turntable
7 RPM (lower speed)15 RPM (higher speed)
7 RPM (lower speed)15 RPM (higher speed)
TCE 330: max. press force5500 N (horizontal arm)2500 N (follower arm)
5500 N (horizontal arm)2500 N (follower arm)
Bead breaker range 70 – 397 mm 70 – 397 mm
Bead breaking force 11500 N 11500 N
Convenient tyre changing Self-centring four-jaw chuck Save time, no need to remove plastic jaws protection
for steel rims inside clamping thanks to their new design
100 mm diameter of mounting column cylinder guarantees column and mounting head stability
Optimized storage/holder for bead lever Universal, flexible adjustment of the lubricant ring
shaped holder, one fits for all
Reduced effort for the operator – increased safety and speed! Be flexible and optimize your job. Save time thanks to
40 % faster bead breaking cylinder Cushioned cylinder for rapid but smooth movement, of
the vertical tilting back pole, at the end of the stroke Time saving tyre inflation, 25 % faster than other
comparable brands. Now easier to reach double-scale pressure gauge (bar/psi) on the side of the pole
Fast clamping thanks to the new self centring table top with more roboust desing and inch scale laser printed
Bright yellow warning and knee protection safety signs at turntable cylinders ("yellow fin")
Special treatment to protect the turntable from dust and rust. Clean has never been so easy! (patent pending)
By a simple movement it is possible to reach the max. turntable working range
Scope of delivery: 1x Roller board for bead breaker 1x Bead pressing device 1x Bead breaker plastic protection 1x Wing side protection for demounting head 1x Tongue protection kit for demounting head 1x Jaws plastic protection kit 1x Bead lever 1x Lubricant brush 1x TCE 330 helper arm device* 1x Ergo Control* 1x TLL 130 tyre leverless system*
*Available only for specific models
What drives you, drives us.
Technology from Bosch is used in practically every vehicle in the world. For us, the focus is on people and helping them to stay mobile.
We have been dedicated to people for more than 125 years with our pioneering spirit, research, production and expertise.
Our dedication is an unwaivering commitment to providing them with a unique combination of parts, diagnostics, workshop equipment and services:
state-of-the-art solutions for efficient vehicle repairs
innovative workshop equipment and software – also available on favorable lease terms
the world’s largest range of new and remanufactured spare parts
fast, reliable delivery service
expert customer care via our hotline
extensive range of training courses
specific sales and marketing support
plus many other services
Bosch products and services Diagnostics
Diesel systems
Gasoline systems
Brake systems
Spark plugs
Energy systems
Batteries
Filters
Wiper systems
Light technology
Comfort electronics
Hybrid/e-mobility
Technical hotline
Knowledge database
Service training
Workshop concepts
Bosch electronic repair service
Fair repair: repairs in line with the market value Fast and reliable: most work completed within
48 hours Quality remains priority: Bosch is committed
to this as a globally leading original equipment manufacturer
Find out more at:https://www.bosch-repair-service.com/
Sub
ject
to te
chni
cal a
nd p
rogr
am c
hang
es.
AA
-AS
/MKC
F
026
P02
836
20
16/0
5
Robert Bosch GmbH Automotive AftermarketBusiness Unit Automotive Service Solutions
73201 PlochingenGermany www.bosch-workshopworld.com