May 9, 2006

OfficeServ 7000 SeriesData Basic Course

Technical Training CourseSamsung Telecommunications America

BCS – Training Group

2

OS 7000 Series ClassOS 7000 Series Class

Course Outline

• Hardware Description and Function

• Configuration

• Data Services Overview

• Programming Access for Data Modules

• Test

3

Hardware:

Data Modules for OfficeServ 7200 and 7400

4

Hardware Description and Function

Common Data Modules for the

OS 7000 Series

5

LIM (LAN Interface Module)LIM (LAN Interface Module)

• 16 ports

• 10/100 Base-T auto sensing full/half-duplex auto-sensing LAN ports

• VLAN (802.1Q) function for QoS

• Switching Hub function

• Installed in any slot

6

PLIM (PoE LAN Interface Module)PLIM (PoE LAN Interface Module)

• 16 ports

• 10/100 Base-T auto sensing full/half-duplex auto-sensing LAN ports

• Power over Ethernet (PoE), provides 48V~54V power to ITP keysets or the SMT-R2000 AP

• VLAN (802.1Q) function for QoS

• Switching Hub function

• Installed in any slot

7

OS 7150OS 7150

• Provides additional power for use with the PLIM and GPLIM cards

• Supports 2 PSU cards

8

OfficeServ 7200 Specific HardwareOfficeServ 7200 Specific Hardware

9

WIM (WAN Interface Module)WIM (WAN Interface Module)

• 1 per system – installed in slot 1 of either cabinet of the OS 7200

• 3 WAN interfaces

• Routing Functions: Static Routing, Dynamic Routing (RIP, OSPF), Inter-VLAN routing, Multicast IGMP

• Network Functions: NAT/NAPT, Firewall, IDS, VPN, QoS

• Provides a managed switch function when a LIM or PLIM is installed in the next slot (slot 2)

10

Eth 1 Eth 2

Eth 0 Eth 3 SIO SERIAL

WIM1 2 3 4 9 10 11 12

5 6 7 8 13 14 15 16

LIMMail Server

(WEB Server)

Internal Connection (10/100Base-Tx)

Internet

DSLAM

10/100Base-Tx

Office PC

Console

RS232C10Base-T

ADSL/VDSL/Cable Modem

10/100Base-Tx

DSU/CSU

V.35

Edge Router

OfficeServ 7200 Configuration

WIM LIM / PLIM

11

OS 7200 Data Module CapacityOS 7200 Data Module Capacity

• 8 LIM per System• 4 per cabinet slots 2 - 5• 128 ports max with 16 of which are managed

L2 Switch

• 1 WIM per System

Router

• Basic Power - PLIM * 1 = 16 ports

PoE

12

OfficeServ 7400 SpecificOfficeServ 7400 Specific

13

GWIMGWIM

• Installed in any slot of any OS 7400 cabinet

• One per cabinet (3 per system)

• Routing between WAN and LAN

• Multi WAN ports for leased lines, xDSL or cable modem

• VPN, QoS and Firewall functions

Ports for Connecting:

• T1 (V35)

• T3 (HSSI)

• 1000 Base-FX/SX/LX/TX GbE

• SIO (RS-232 Programming)

14

GWIMSGWIMS

• Required for Site-to-Site VPN tunnels

• 64 bit, 66MHz PCI bus Interface• IPSEC, PPTP, L2PP, PPP, IKE• Symmetric key encryption

(DES, Triple DES, RC4)• Authentication (SHA-1, MD5)• Compression (LZS, MPPC)• Public key processing unit• Random Number Generator

15

GWIM default IP addressesGWIM default IP addresses

10.0.0.1/24 10.0.1.1/24 10.0.2.1/24

IE ver 6.0 or higher required for GWIM programming access and using port # 3

16

GWIMGWIM

Point IE to 10.0.2.1 (port 3) to open this window for the GWIM

admin

root

17

18

19

GWIMSGWIMS

20

GSIMGSIM

• Installed in any slot

• 2 per cabinet (6 total in 3 cabinets)

• 10 ports of 1000 Base-SX/LX/TX ports

• Ethernet Switch (802.3 compatible)

• VLAN Networking (802.1q)

• Diffserv

21

GSIM default IP addressGSIM default IP address

10.0.3.1/24

IE ver 6.0 or higher required for GSIM programming access and using any port

22

GSIMGSIM

admin

root

Point IE to 10.0.3.1 to open this window for the GSIM

23

24

25

GPLIMGPLIM

• 12 ports of 10/100 Base-T Full/Half duplex auto-sensing ports

• 2 ports of 1000 Base-TX/SX/LX GbE ports, uplink LAN interface

• L2 Ethernet Switching

• VLAN Networking (802.1q)

• Packet Priority Control (802.1p)

• Flow Control (802.3x)

• Multi-Casting (IGMP Snooping)

• IEEE 802.3af Power over Ethernet (PoE)

26

GPLIM default IP addressGPLIM default IP address

10.0.4.1/24

IE ver 6.0 or higher required for GPLIM programming access and using any port

27

GPLIMGPLIM

admin

admin

Point IE to 10.0.4.1 to open this window for the GPLIM

28

29

30

OfficeServ 7400 Configuration

eth0 eth1

eth2Router

Internet(WAN)

L3 Switch

L2Switch

전화

전화

전화

전화

GWIM

GSIM

GPLIM

10/100Mbps 1000Mbps RJ-45 console

V.35

HSSI

GSIM

GPLIMGPLIM

GPLIM

T3/E3T1/E1

31

OS 7400 Data Module CapacityOS 7400 Data Module Capacity

• 11 GPLIM per Cabinet• Max.: GPLIM * 33(or 32)• 462 ports (448 ports) - including Giga ports

L2 Switch

• 11 LIM per Cabinet• Max.: LIM * 33 (or 32)• 528 ports (512 ports)

L2 Switch

• 2 GSIM per Cabinet• Max.: GSIM * 6• 60 ports

L3 Switch

• 1 GWIM per Cabinet • Max.: GWIM * 3

Router

• Basic Power - GPLIM * 4 = 48 ports - PLIM * 3 = 48 ports

• with extended 1 power module - GPLIM * 8 = 96 ports - PLIM * 6 = 96 ports

• with extended 2 power module - GPLIM * 11 = 132 ports - PLIM * 11 = 176 ports

PoE

32

Data Services Overview

OfficeServ 7200

and

OfficeServ 7400

33

Switch (10/100M)

Call server Router

G.S

F.S F.S F.S

F.S F.S

F.S

F.S F.S F.S

F.S F.S

※ G.S = Switch (Gigabit) F.S = Switch (10/100M)

G.S F.S F.S

OfficeServ Enterprise

OfficeServ Enterprise

OfficeServ Enterprise Switch (10/100M)

Switch (10/100M) Switch (10/100M)

Switch (10/100M) Switch (10/100M)

IP PhoneWorkstation Server

전화 전화 전화

전화 전화 전화

전화 전화 전화

전화 전화 전화

IP PhoneWorkstation

WAN (CSU / DSU)

전화 전화 전화

전화 전화전화

IP PhoneWorkstationWorkstation

Part A Part B

IP Phone

Third

Second

First Floor

Switch (Gigabit)

Switch (Gigabit)

WAN (xDSL/CABLE)

OfficeServ 7400 Network Configuration

Switch (10/100M) Switch (10/100M)

34

Category OfficeServ 7200 OfficeServ 7400 Difference

Feature

IP Key Phone +

(FE Router, 10/100 Switch, Security , IP Telephony,

Wireless)

IP Key Phone +

(Giga Router, 10/100/1000 Switch, Security, IP Telephony,

Wireless)

Router/L2 FE Vs

Router/L3 GbE/L2 FE

System Performance

50 Kpps Routing(WIM)

1.6~12.8 Gbps Switching

360 Kpps Routing (GWIM)

3.2 ~ 165Gbps(GbE S) Switching

OS7200(2 Rack)

LIM: 1.6Gbpa * 4ea * 2

OS7400(3 Rack)

GSIM: 10Gbps * 2ea * 3

GPLIM:3.2Gbps * 11ea *3

VPN100 Tunnel Support

50 Sessions / 1 Tunnel1024 Tunnel Support

OS7200: Hifn7951

OS7400: Cavium CN1120

Bench Marking IP PBX, IP-Key phone Product

Avaya, Alcatel, Cisco CM

IP PBX, IP-Key phone Product

Avaya, Alcatel, Cisco CM

Multi Service S/R Vs

Multi Service All-In-One System

OS7200 vs OS7400

35

Feature OS7200 OS7400

CPU MPC 8250 300Mhz IBM 750GX 1Ghz(Router)

MPC8247 400Mhz(GbE S)

MPC852 100Mhz(FE S)

Switching Capacity Basic 1.6Gbps

Max. 12.8Gbps (LIM: 8ea)

Basic 10Gbps (GSIM)

Basic 3.2Gbps (GPLIM)

Max. 165Gbps (GSIM 6ea, GPLIM 33ea)

Routing Performance 50 Kpps 360 Kpps(64Bytes)

Max. VLAN Group 255 255(GPLIM)

4,095 (GSIM)

Ethernet Switch 10/100 Support 1000 TX/SX/LX

10/100 Fast Ethernet, PoE

T1/E1 1 1

T3/E3 - 1

WAN 2 3

Application Service . IP Telephony

(H323, SIP, Proprietary)

. K/P, UMS, Data All-In-One System

. SIP-ALG

. IP Telephony

(H323, SIP, Proprietary)

. Load Balancing

. Transparent Fail Over

. SIP-ALG

OS7200 vs OS7400

36

Features OS7200(v1.1x) OS7200(v1.2x) OS7400

Switching

Features

L2 Switch,

STP,

Port mirroring,

802.3x, 802.3af

(Zebra)

L2 Switch, STP, RSTP

802.3ad/LACP

Port mirroring

802.3x, 802.3af

(IP Infusion, ZebOS)

L2/L3 Switch, STP, RSTP

802.3ad/LACP

Port mirroring

802.3x, 802.3af

(IP Infusion, ZebOS)

Routing Features

RIPv1/v2, OSPFv2

PPP, FR, HDLC

(Zebra)

RIPv1/v2, OSPFv2,

PPP, FR, HDLC

(ZebOS)

RIPv1/v2, OSPFv2, BGPv4

PPP, FR, HDLC

(ZebOS)

Multicast IGMP Snooping PIM-SM, DVMRP, IGMPv2,

IGMP Snooping

PIM-SM, DVMRP, IGMPv2, IGMP Snooping

VLAN MAC / Port based VLAN MAC/Port/Tag(802.1q) MAC/Port/Tag(802.1q), Protocol,

IP Subnet Based VLAN, GARP, GVRP

QoS 802.1p Priority,

Level Configuration,

HTBQ/BoD, SPQ

VoIP QoS

802.1p Priority,

Level Configuration,

HTBQ/BoD, SPQ

VoIP QoS

802.1p Priority,

Level Configuration,

HTBQ/BoD, SPQ,

GSIM L3 QoS: DiffServ, VoIP QoS, Marker, Classification, Congestion Management, Re-

mapping

Security Firewall/IDS/IPS/NATPT,

VPN (IPSec, PPTP)

Authentication PAP/CHAP, VLAN

ACLs

Firewall/IDS/IPS/NATPT,

VPN (IPSec, L2TP, PPTP)

Authentication PAP/CHAP, VLAN

ACLs

Firewall/IDS/IPS/NATPT,

VPN (IPSec, L2TP, PPTP)

Authentication PAP/CHAP, VLAN

ACLs

Management Web CLI, SNMPv1/2/3, 4RMON,

Secure Web-based

CLI, SNMPv1/2/3, 4RMON,

Secure Web-based

OS7200 vs OS7400

37

GWIMGWIM

Router Functions:• Path Management and queuing of data packets for external WAN

and internal LAN• Static and Dynamic routing – RIPv1, RIPv2, OSPFv2 (Open

Shortest Path First), BGP4 (Border Gatweay Protocol 4) protocols• DHCP (Dynamic Host Configuration Protocol) with PPPoE (Point-to-

Point Protocol over Ethernet) client function in Ethernet WAN interface

• Encapsulation function of HDLC, PPP and Frame Relay in Serial WAN interface

• Support of IP multicast – IGMPv1 (Internet Group Management Protocol) and IGMPv2

protocolsDVMRP (Distance Vector Multicast Routing Protocol)PIM-SM (Protocol Independent Multicast-Sparse Mode)

• NLB (Network Load Balance)

38

GWIM cont.GWIM cont.

Data Network Security Functions• Inbound and Outbound NAT (Network Address Translation) / PT

(Protocol Translation) function• Firewall – access control from the outside by Extended Access List• IDS (Intrusion Detection System) function –

Detection and report of access for the access control area by the access list

Recognition and notification of illegal packets by applying the basic intrusion rule for packets

Detection and block of DoS attack such as SYN Flood• VPN (Virtual Private Network) function –

VPN Gateway function based on PPTP (Point-to-Point Tunneling Protocol), L2TP (Layer 2 Tunneling Protocol) and IPSec (Internet Protocol Security protocol

Confidentiality and integrity functions via VPN tunneling and data encryption

39

GWIM cont.GWIM cont.

Data Network Application Functions• Data network application functions such as NAT/PT, firewall, VPN,

DHCP and Application Level Gateway (ALG)ALG function

support to operate the security function and smoothly pass VoIP packets by implementing the ALG function for signaling and media traffic

DHCP Server functionauto-configuration of the network environment for the IP

equipment in another functional block of the OS systemDHCP Relay function

to connect the IP equipment in another block of the OS system to external DHCP server for the auto-configuration of the network environment

40

GWIM cont.GWIM cont.

QoS Functions• Priority queuing process for layer 3 packets and for a specified IP

• Priority queuing process for layer 4 packets and RTP packets (UDP/TCP port)

41

GWIM cont.GWIM cont.

Management Functions• Advanced debugging function via Telnet connection

• Configuration and verification for the operations of the GWIM functional block via a browser or the SNMP (Simple Network Management Protocol)

• 4RMON (4 Real-time Monitoring) function

• Program upgrade via TFTP, HTTP or a local manager’s PC

42

GSIMGSIM

Switch Functions• L2 / L3 Switch function

• Jumbo Packet (9216 byte) Support

• Managed switch function by using access interface for LAN

• Learning Bridge function using Spanning-Tree algorithm

• Layer2 Frame Priority function by 802.1p

• 802.3x Layer 2 Flow Control

• Packet Mirroring

• VLAN (port and 802.1Q tag)

• VLAN classification – MAC based / IP based / protocol based

• Ingress filtering for 802.1q VLAN Security

• Dynamic VLAN Management via GARP VLAN Registration Protocol (GVRP)

• IP Multicasting Relay support (IGMP Snooping function)

• Load Sharing for Link Aggregation Control Protocol (LACP) / Port Trunking

43

GSIM cont.GSIM cont.

Router Functions• Path management and queuing of data packets for external WAN

and internal LAN

• Static and Dynamic routing – RIPv1, RIPv2, OSPFv2 and BGP4 protocols

• DHCP in Ethernet WAN interface

• Support of IP multicast –

IGMPv1 (Internet Group Management Protocol) and IGMPv2 protocols

DVMRP (Distance Vector Multicast Routing Protocol)

PIM-SM (Protocol Independent Multicast-Sparse Mode)

44

GSIM cont.GSIM cont.

Data Network Application Functions• DHCP Server – auto-set of network environment for IP equipment in

the OS 7400 system

• DHCP Relay - connection of IP equipment in the OS 7400 to an external DHCP server to enable to auto-set the network environment

45

GSIM cont.GSIM cont.

QoS Functions• Priority process for Layer 2 frame under 802.1p standard

• Priority queuing process for Layer 3 packets and priority queuing for a specified IP

• Priority queuing process for Layer 4 packets and priority for Real-time Transport Protocol (RTP) packets (UDP/TCP port)

46

GSIM cont.GSIM cont.

Management Functions• Advanced debugging function via Telnet connection

• Configuration and verification for the operations of the GSIM functional block via a browser or the SNMP (Simple Network Management Protocol)

• 4RMON (4 Real-time Monitoring) function

• System monitoring and management via the system log function

• System synchronization function via Network Time Protocol (NTP)

• Program upgrade via TFTP, HTTP or a local manager’s PC

47

GPLIMGPLIM

Ethernet Switch Functions• Fast Ethernet L2 switch module

• Managed switch function

• Support of multicasting relay (IGMP snooping function)

• Learning bridge function by spanning-tree algorithm

• VLAN based on ports, tags, protocols or MAC addresses

• Uplink fail over function by 4-port/3-group port trunk

• Layer 2 frame priority function by 802.1p

• 802.3x layer 2 flow control

• Network Access Control function based on ports by 802.1x

48

GPLIM cont.GPLIM cont.

Power over Ethernet (PoE) Functions• Power supply function via Ethernet cable without additional power

source

• Managed function in accordance with ports

• Function to confirm the status of current and to restrict the supply of the current

• Enable/disable function for supplying power

• Based on PSU and SEPU units available

49

GPLIMcont.GPLIMcont.

Management Functions• Advanced debugging function via Telnet connection

• Configuration and verification for the operations of the GPLIM functional block via a browser or the SNMP (Simple Network Management Protocol)

• 4RMON (4 Real-time Monitoring) function

• Program upgrade via TFTP, HTTP or a local manager’s PC

50

OS 7000 Series Data Basic CourseOS 7000 Series Data Basic Course

Thank you for attending the

OfficeServ 7000 Series Data Basic Course