Date post: | 14-Apr-2018 |
Category: |
Documents |
Upload: | ankur-shrivastava |
View: | 231 times |
Download: | 0 times |
of 12
7/30/2019 Mayur Industrial
1/12
File on
Industrial project
Submitted to:
M r M anoj bandil
Dept. of el ectrical
Submitted by :
M ayur Shukl a
0915ex0910308th sem. 4
thyear
7/30/2019 Mayur Industrial
2/12
SOME ISSUES OF ECOLOGICAL HAZARD IN
TEXTILE INDUSTRY AND THEIR REMOVAL
1 INTRODUCTION
In today's competitive world, domestic and export markets in textiles are progressing at a rapid pace.
Exponential growth in global industrialization is noticed in the west and rest of the world. Innovations in
the use of electronics information technology, computers and automation are needed to achieve a high
quality standard. Textile and apparel, being labour intensive industries, code of conduct at the work placeis hard to overlook. But the main challenge before the textile production industry is as to how to produce a
product at a competitive price by using environment friendly process and by reducing emissions and
pollution treatment cost.
Biosphere is under serious trouble and impact on its atmosphere, hydrosphere and lithosphere by human
cannot be ignored. Man made activities on water by domestic, industrial, agriculture, shipping, radio-
active, aquaculture wastes; on air by industrial pollutants, mobile combustion, burning of fuels, agricultural
activities, ionization radiation, cosmic radiation, suspended particulate matter; on land by domestic
wastes, industrial waste, agricultural chemicals and fertilizers, acid rain, animal waste have negative
influence over biotic and abiotic components on different natural eco-systems. Global warming, rising of
sea level, abnormal climatic change, loss in bio-diversity, deforestation, ozone layer depletion are some
of the adverse effects on environment.
Textile accounts for 30% of India's export. There is no doubt that price, quality, turn around time and
social compliance are the essential elements of export. Of late, clean processing has become an
additional requirement. Unfortunately, in comparison to other branches of engineering and technology,
environmental pollution of textile industry seems to be the least studied area.
How long can we continue to harm environment? Will our business exist if biosphere is polluted? Will
textile industry survive and be able to compete? These are some of the questions, which have motivated
the present study.
2 ECO DEGRADATION IN TEXTILE INDUSTRY
Textile industry contributes 30% of India's export. It produces over 400 million meters of cloth and around
1000 million kg of yarn per annum. Textile sector is labour intensive and nearly a million of workers are
associated in various unit operations of about 700 mills. Textile wet processing activity contributes about
70% of pollution in textile industry. It is estimated that there are around 12,500 textile processing units
wherein the requirement of water ranges from 10 litres with an average of 100 litres per kg [1]. Right from
cotton cultivation and manufacture of fibres, spinning, weaving, processing and finishing, more than
7/30/2019 Mayur Industrial
3/12
14,000 dyes and chemicals are used and a significant quantity of these goes in the solid, liquid and air
wastes, thereby impart pollution of air, land and surface water.
Towards the end of 20th century, world has become more ecology consciousness and thus green textile
concept is emerged to facilitate eco-management in textile arena. Different unit operations, which
contribute to eco degradation, are described and analysed in this chapter.
2.1 Noise Pollution
Noise is one of the most pervasive environmental problems. There is no doubt that it has adverse effect
on human beings, and their surroundings.
The ISO defines noise intensity level [2] as:
L = 20 log10 (P / P0) = 10 log10 (I / I0) (1)
Where P and P0
are the sound pressures of the noise present at a place and the reference sound
pressure at 1000 Hz at the threshold of hearing which is given by 20 micro Pascals. I is the sound
intensity level being measured and I0 is the reference sound intensity at 1000 Hz at the threshold of
hearing and is given by 10-12
w/m2The relationship between sound pressure, sound intensity and intensity
level (dB) is given in the literature [3]. The sound does not get perceived by the human ear in the same
manner over the whole audible frequency range. Low-pitched sound of high intensity level (decibel count)
could not be judged by the human ear to be particularly loud. Similarly, the human ear has been
incapable of perceiving vibrations of a frequency much above 20,000 cycles per second, although many
animals such as dog have been able to detect these sounds.
In industry, increased mechanization results in increased noise levels. Operation of textile machines
carries a high risk of hearing loss. The evaluation of textile worker's noise induced hearing loss was
reported elsewhere in the literature [4].
Health related effects are:
Respiratory modification
Gastrointestinal
Endocrine stimulation
Galvanic skin resistance alteration
Permanent or temporary hearing loss
Increased human annoyance
Communication interference resulting in reduced worker's efficiency
Noise Levels in Textile Machineries
2.1.1.1 Yarn Production
Because of high spindle speeds reached on new machines (ring spindles up to 20000 rpm, rotor up to
110000 rpm) spinning mills can generally be assumed to generate a great deal of noise. Noise levels of
70 to 100 dB are commonly recorded in workrooms.
7/30/2019 Mayur Industrial
4/12
2.1.1.2 Weaving and Knitting
Although considerable progress has been made in the weaving sector over the last 20 years, the whole
area of noise nuisance and, closely associated with it, vibration coming from looms, cause major
problems.
Noise levels of 100 to 120 dB must be expected in weaving rooms, according to the design, type, fitting,
erection and number of looms used, fabric structure, building type and size etc. The vibration transmitted
from the running looms to the building can, under certain circumstances, cause a nuisance to the local
population and damage to nearby buildings, and to avoid this special vibration absorbers are now
provided.
However, permissible limit set up at 90 dB by Federal Standards of USA for maximum exposure duration
of 8 hours per day. Typical values of noise level in textile machines are shown in Table I.
2.1.2 Remedial Measures
Noise level can be lowered by the use of noise control enclosures, absorbers, silencers and baffles and
by the use of personal protective equipment (PPE), such as earmuffs. Where technical methods are
insufficient, noise exposure may be reduced by the use of hearing protection and by administrative
controls such as limiting the time spent in noisy environment and scheduling noisy operation outside
normal shifts or at distant location. Even though noise-reducing measures may have been incorporated in
the design of the machinery, greater output may generate higher noise levels. For instance, every
doubling of the speed of rotary machines the noise emission rises by about 7 dB, warp knitting looms by
12 dB and in fans by around 18 to 24 dB.
Noise pollution is a problem that has unsatisfactorily been tackled so far. Though noise-absorbing sheets
are used to cover the inner walls of loom shed, still more appropriate means need to be devised. In
modern shuttle less looms because of better engineering designs of the machines the noise level is
lesser. But those shuttle less looms are costly.
7/30/2019 Mayur Industrial
5/12
2.2 Air Pollution
All textile-manufacturing processes generate environmental pollution. Workers are exposed to the risk of
breathing air polluted with dust and fly and contracting respiratory ailments, byssinosis (lung disease),
chronic bronchitis etc.
Air Pollution Created By Textile Machineries
2.2.1.1 Spinning Plant
In spinning mill, the extent of cotton dust contamination varies from section to section, as it is worst in the
blow room and minimum at the cone winding section. The workers are exposed to such working
environment and inhale fibrous particles and dust whole day. Generally, air suction system exists nearly
in all departments to maintain certain humidity and to remove air contaminants, however, at some places
it works effectively but at certain areas air exchange is not proper resulting into suffocation and
inconvenience for the workers.
2.2.1.2 Weaving Shed
In weaving mill, fibrous particles are present in the working environment though not much but still these
are generally inhaled by most of the workers. These small fibrous particles are generated during weaving
activities and disperse in occupational air.
2.2.2 Remedial Measures
To minimize the effect of these floating fibres or impurities, the humidified air which is circulated in the
spinning and weaving department is filtered so as to separate these floating impurities from the air.
In order to minimize the risk of industrial diseases among the workers, Occupational Safety and Health
Authority (OSHA) of U.S.A has specified concentration limits of dust in the air streams of production
rooms for compliance by the concerned industries is given in Table II.
Air circulation per hour is optimized to keep the air streams clean and hygienic to prevent any risk to the
health of the workers and depicted in Table III.
7/30/2019 Mayur Industrial
6/12
2.3 Pollution in Cotton Cultivation
In cultivation of cotton, huge quantities of pesticides, fertilizer and water are used. About 18% of world
production of pesticides is used for cotton cultivation. It prevents the growth of undesirable organisms and
thereby improves the crop yield. Most of the pesticides are harmful and cause environmental degradation.
2.3.1 Organic Cotton
Organic cultivation of natural fibres is now practiced in different parts of the globe with a view to reduce
the adverse impact on the environment due to the indiscriminate use of fertilizers and pesticides. For
cultivation of organic cotton, chemical fertilizers and pesticides cannot be used at all. Further, in order to
remove the residual fertilizers and pesticides that may be present in the soil, crops are to be cultivated for
three seasons without the use of chemical fertilizers or pesticides [5]. Rather than attempting to eradicate
all insects with chemicals, organic farmers cultivate a diversity of natural enemies, which prey on insect
pests, and lure pests away from cotton by planting trap crops. Insect pests can be effectively kept inbalance with well-timed introduction of beneficial insects to fields.
2.3.2 BT Cotton
Bt cotton, genetically engineered (transgenic) cotton, was heralded for its environmental and human
health benefits and as a step towards sustainable agriculture since, farmers could significantly reduce
insecticide use. To create cotton with built-in protection against insects, genetic engineers spliced a Bt
toxin gene into cotton. The new gene that enabled the transgenic cotton to produce insecticidal toxin
throughout the plant was obtained from a soil bacterium, Bacillus thuringiensis (Bt), an organism well
known to many organic and sustainable growers who have used Bt in sprays to control insects. Bt gene is
put into cotton to protect against three pests: tobacco budworm, cotton bollworm and pink bollworm.
However, the Bt cotton is not effective against a number of other pests, including the boll weevil and
whitefly.
2.4 Chemical Pollution
2.4.1 Sizing
Starch is applied to cotton yarn in sizing operation to increase its strength and abrasion resistance to
7/30/2019 Mayur Industrial
7/12
withstand the stresses and strains of weaving.
Certain preservatives like pentachlorophenol are added to the starch paste in order to protect it from the
attack of microorganisms. They have toxic effect on human skin and the effluent generated from this
process is due to spills and floor washing. Use of synthetic starches reduce the use of such preservatives
and thereby reduce the health hazards.
2.4.2 Grey Inspection
During weaving operation, oil stains are produced if proper precautions are not taken. Stain removers like
carbon tetrachloride are used prior to chemical processing. In fact, carbon tetrachloride has 10% more
ozone depletion capacity than Freon gas.
2.4.3 Chemical Processing
Analysis of water consumption and pollution in effluent of textile chemical processing of cotton goods has
been adapted from literature [6] and is presented in Table IV.
2.4.3.1 Desizing
This process removes size ingredients such as starch, softeners, preservatives etc used in sizing.
Enzymes are used to break the starch into water-soluble dextrin. Bacteria can easily attack the water-
soluble dextrin and these are very degradable and have high BOD.
2.4.3.2 Scouring
The scouring process is meant to remove impurities in fibre such as oils, fats, waxes, seed particles,
spinning oils applied and the residual size ingredients still remaining after desizing. All these increase the
BOD of effluent.
2.4.3.3 Bleaching
The process destroys the natural colour of the fibre and makes it white. Sodium hypochlorite is a common
bleaching agent. But due to its highly toxic nature, many countries have banned their use. Hydrogen
Peroxide bleaching is preferred over other bleaching agents due to negligible toxic effect. Stabilizer is
commonly used in peroxide bleaching. Silicate and phosphate based stabilizers have been found to be
non-biodegradable and hence their use has been banned by number of countries.
2.4.3.4 Mercerization
7/30/2019 Mayur Industrial
8/12
In this process, cotton fabric is treated with a strong caustic soda solution at room temperature and
washing it off with water. It improves the strength, elasticity, luster, dye uptake and dimensional stability of
the fabric. Large volume of dilute caustic soda solution generated in the process, if allowed to discharge
down the drain, will cause water pollution. However, this wash liquor can be re-used in scouring, dyeing
with vat dyes and mercerization.
2.4.3.5 Dyeing
Dyes, which form carcinogenic amines on reduction, contribute substantially for increased BOD/COD
need to be avoided for use in dyeing. Dyes, which contain heavy metal such as chromium, cobalt, and
copper, are detrimental for the environment. Major pollutants in dyeing include unfixed dye, fixing agents,
reducing agents, alkali, organic acids, oxidizing agents, salts, metals, carriers etc. However, there is
increasing awareness in recent years towards the use of number of natural dyes, which are eco-friendly
and have no impact on the environmental pollution.
2.4.3.6 Printing
Colours selected should be non-toxic and not based on forbidden amines. Dyes with high fixation
properties and modified printing process needing less wash out are recommended to be used in printing.
Printing gums with low BOD and free from pentachlorophenol are preferred. Use of urea is to be
minimized, citric acid in disperse prints should be replaced; phenol used in nylon fabric printing is to be
substituted by diethylene glycol. Use of kerosene in pigment printing should be completely eliminated.
Formaldehyde based fixers for improving rubbing fastness of pigment prints should be restricted. Major
pollutants in textile printing are: suspended solids, urea, solvents, colour, metals, vapours during drying
and curing, screen cleaning solvents.
2.4.3.7 Finishing
Formaldehyde based cross-linking agents applied to cellulosic textiles for crease resistance and
dimensional stability are the highly toxic chemicals. Reactive softeners, certain flame-retardants, waterrepellent and rot proofing finishes, are the other pollutants.
In the replacement of formaldehyde based finishing agent, polycarboxylic acid like butane tetra carboxylic
acid, citric acid and copolymer of maleic acid met many requirement for satisfactory performance in terms
of the level, reactivity, durable press performance, durability to laundering, fabric strength retention, low
reagent volatility and absence of odour.
2.4.3.8 Enzyme Treatment
Application of various enzymes in desizing, scouring, degumming of silk, finishing has brought a new
horizon in textile wet processing technology. Enzyme is eco-friendly, completely biodegradable and they
will not leave any chemical residues on the processed materials, and the colour change on the dyed
goods is minimal.
2.5 Man- Made Fibre Industry [7]
Major raw material for synthetic fibres is obtained from petrochemical feedstock and is commonly known
as monomer whereas cellulose is the major raw material for viscose and acetate. The type and average
consumption of major raw material for individual fibre is given in Table V.
7/30/2019 Mayur Industrial
9/12
A large number of various chemicals, besides pulp or monomer, as the case may be, are required during
the manufacture of each fibre. Ingredients include acetic acid, titanium dioxide, spin finish, catalyst,
methyl acrylate or vinyl acetate, sulphuric acid, sodium hydroxide, carbon disulphide, Zinc, sodium
sulphate, di-sodium sulphide, acetic anhydride, thermal stabilizer, light stabilizer, antioxidants etc.
ACN is toxic and as a consequence stringent measure in acrylic manufacturing plant is necessary to
ensure that it does not contaminate liquid discharge. One of the major pollutants in viscose plant liquid
effluent causing concern is the presence of zinc. The average consumption of zinc is in the range of 15
Kg/MT fibres. The zinc concentration in the effluent is on an average 15-40 mg/l.
The average consumption and parameters for liquid effluent discharged by nylon and polyester industries
are given in Table VI. In India, for nylon and polyester, the wastewater generated is on an average of 170
m3/MT and for viscose 1200 m
3/MT, respectively.
2.5.1 Pollution Control Standard
The Central Pollution Control Board formulated a minimum National standard (MINAS) for all polluting
industries including fibre industry. MINAS as depicted in Table VII must be adhered to before the liquid
can be discharged outside the factory premises.
Effluent treatment of man-made fibre industry, especially synthetic fibre may not be very complicated.
However, there is pollution control problem in viscose and acrylic fibre production.
7/30/2019 Mayur Industrial
10/12
3 Categorization of Textile Waste
Textile industry covers a wide range of manufacturing processes and technologies to design the required
shape of the final product. But during the course of various process flows, there is obvious generation of
wastes, which are classified into four categories namely, hard to treat wastes, dispersible wastes,
hazardous or toxic wastes and high volume wastes [8].
3.1 Hard to treat waste
These include colour, metals, phenols, certain surfactants, toxic organic compounds, pesticides, as well
as phosphates. Major sources are:
Colour and metals - dyeing operation
Phosphates - dyeing operation
Surfactants - non-biodegradable organic materials
3.2 Dispersible waste
Prominent source of dispersible wastes in textile wet processing are the following:
Print paste, lint, coating operation, solvent, waste stream from continuous dyeing, printing, finishing
etc.
3.3 High volume waste
High volume wastes are sometimes a problem for the textile processing units. These include water from
preparation and dyeing stages, alkaline wastes from preparation, salt, cutting room waste, knitting oils
and warp sizes. These wastes sometimes can be reduced by recycle or reuse as well as by process and
equipment modifications.
3.4 Hazardous or toxic wastes
The impact on the environment of such kind of wastes is significant. They include metal, chlorinated
solvents, non-degradable surfactants and other non-biodegradable or volatile organic materials. These
wastes originate often from non-process operations, such as machine cleaning.
4 Eco-Management
Textile industry encompasses a range of unit operation covering a variety of natural and synthetic fibres
to produce fabrics. Various parameters such as turbidity, acidity, alkalinity, total dissolved solids, BOD,
metal content, toxic substances etc. are bench marked so as to ensure that the effluent water before
being released into city sewage, stream, river or sea is not harmful to human, animal or plant life. With theconcept to bring the parameters of effluent water to acceptable standards, the effluent is treated. The
appropriateness of their choice and sequence is critical for the success of treatment plant
4.1 Treatment of Textile waste
Three types of process are normally used for treatment and recycle of effluent from the textile industry.
These are physico-chemical, biological and membrane process.
7/30/2019 Mayur Industrial
11/12
Physico-chemical processes remove suspended and colloidal impurities, to coagulate and flocculate
reactive, disperse and vat dyes and to facilitate their removal by sedimentation. The removal is a function
of entrapment within a voluminous precipitate consisting primarily of the coagulant itself. Result of
addition of chemicals is net increase in the dissolved constituents in the wastewater. Coagulants usually
added include alum, lime etc. [9].
These processes offer a good pre-treatment to the downstream biological and membrane processes.
Biological processes used to remove dissolved organics from effluent and thus to reduce chemical and
bio-chemical oxygen demands of the effluent. This is achieved biologically wherein bacteria is used to
convert the colloidal and dissolved carbonaceous organic matter into various gases and into cell tissue.
Because the cell tissue has a specific gravity slightly greater than that of water, removal from the treated
effluent is facilitated under gravity. Biologically treated effluent contains dissolved salts and residual
impurities that have passed through the previous processes. These are removed in the membrane
process such as reverse osmosis, which is suitable for removing high salt concentrations so that the
treated effluent can be re-used again in the processing. A typical flow chart of a water recycle plant for
textile industry is shown in Figure 1
4.2 Re-Use of Wastewater
In textile industry, the wastewater in certain processes like continuous scouring, mercerizing is re-used,
thereby not only economises the wastewater costs but also reduces the volume of effluent to be
disposed. In a mill, if wastewater is clean enough after secondary and tertiary treatment, it can be reused
in processes like washing, soaping etc.
5 Conclusions
Green minded consumers prefer "eco-friendly" textiles. In the present global scenario, if the textile
industry wishes to bring prosperity through diversification and modernization, they have to manufacture
eco-friendly products and the overall textile processing will have to be modified in such a way so as to
avoid any toxicity as efficiently as possible. Our motto is to save living species and its surrounding
environment. Thus we must start using sophisticated and better-designed machines with less noise and
follow improved method of air purification and circulation system. And we should stop using chemicals
7/30/2019 Mayur Industrial
12/12
and dyes, which produce harmful effect to the biotic and abiotic factors in our eco-systems. Reduction of
waste at the source is the preferred strategy instead of the traditional method of "end of pipe waste
treatment". Apart from problematic chemicals and dyes, the main pollutant is, of course, water. So, the
new technologies, which aim to reduce or eliminate water, are to be conceived.
References:Lal, R. A. "Problems of Environmental Control in Chemical Processing Units, NCUTE Extension
Programme on Environmental Problems in Chemical Processing of Textiles", KCT, Coimbatore, 21-22
June 2001.
Shastree, N. K., "Environmental Resource Management, Noise Pollution: Standards and Control", pp.
175-215, Anmol Publication Pvt. Ltd., New Delhi, 1997.
Prabhaka, V.K., "Environmental Noise Pollution, Nature of Noise", pp. 60-61, Anmul Publications Pvt.
Ltd., New Delhi, 2001.
Ertem, M., Ilcin, E., Meric, F., "Noise induced Hearing Loas Among Cotton Textile and Carpet MillWorkers", Tr. J. of Medical Sciences, 28, pp. 561-565 (1998).
Subramanian, S., and Phalgumani, G.R., "Processing of Eco-friendly Textiles: International Norms", A
Bilateral Symposium on Eco-Friendly Textile processing, IIT Delhi, Nov 6-7, 1995.
Wagle, N.P., "Eco-Management for Textile Industry", NCUTE Programme on Eco-Friendly Textile Wet
Processing, S.S.M. College of Engineering, Komarapalayam, Tamil Nadu, 26-27 July 2001.
Mukherjee, A. K., "Pollution Control in Man-made Fibre Industry", A bilateral symposium on Eco-friendly
Textile Processing (India and Japan), IIT Delhi, 6-7 November 1995.
Das, S., and Ghosh, A., "Studies on Eco degradation During Processing of Textiles", National Conference
on Environmentally Conscious Design and Manufacturing - Issues and Challenges, KCT, Coimbatore, 23-
24 July 2004.
Metcaff and Eddy, "Waste Water Engineering, Treatment, Disposal and Reuse", 3rd Edition, Mc-Graw-Hill
International Edition, Singapore, 1997